November 2013

• Store product up and off the floor preventing product damage.

• Racks store easily with little storage space required when not in use.

• Standard rack designs/sizes can be changed to meet your specific needs.

“Ideal for yourcustomer’s

material handling needs.”

• Pallet Frames• Stack Racks• Nestable Racks

Call today for assistance in your storage needs.

[email protected]

This Issue of Material Handling Network is Sponsored In Part By:

NetworkMATERIAL HANDLING

The Dealers’ Source For Portable RacksTM

Stock Program Availableon Some Sizes / Designs

Toll-Free: 800/939-3962Phone: 636/527-1868 Fax: 636/256-8963

www.dyna-rack.com [email protected]

Pallet Frames

StackRacks

NestableRacks

STORAGE SOLUTIONS FOREVERY APPLICATION

www.nashvillewire.com | 1.800.448.2125CALL: 615-743-2600 | FAX: 615-743-2601 | [email protected]

WIRE CONTAINERS

ROLL CARTS

BOOTH S4753

WIRE DECKING

Advertiser’s Index/Table of Contents 48 Classifieds 44 Industry Link 38 Product Preview 47

www.mhnetwork.com Ph 800.447.6901 Fx 800.230.6218 [email protected] NOV13

Call Don at Hubs and Wheels of Emory Inc.Phone: 276-944-4900 | Fax: 276-944-4927 | Email: [email protected]

Visit www.hubsandwheelsofemory.com TODAY!

FANTASTIC WHEEL INNOVATION:

Hubs and Wheels builds the worlds strongest and most innovative under-ground mining wheels!

The wheel is guaranteed against workmanship,

defects & materials for 1 million tons or 5 years, whichever comes first!

HUB

S A

ND WHEELS OF EMORY INC

276-944-4900

150 OR 200 TON TIRE PRESS• 36” or 46” Electric or Gas with or without Trailer

• 56” thru 90” 200 Ton Electric Stationary

• Trailer is Now 2ft Longer and comes with Tool Boxes!

• All Parts - Cages, Stands, Plates

• Heavy Duty Unicage Adjustable 8” thru 36”

• MFG. OF EXTREME SERVICE HEAVY DUTY WHEELS

View Network Magazine Online:


Receive Material Handling Network

for FREE!Start getting

your complimentary

copy of Network’s print and/or digital magazine at:

www.mhnetwork.com/material-handling-magazine-subscriptions


Ph: 276-944-4900Fx: 276-944-4927don@hubsandwheelsofemory.comwww.hubsandwheelsofemory.com

150 OR 200 TON TIRE PRESS• 36” or 46” Electric or Gas with or without Trailer• 56” thru 90” 200 Ton Electric Stationary• Trailer is Now 2ft Longer and comes with Tool Boxes!

• All Parts - Cages, Stands, Plates• Heavy Duty Unicage Adjustable 8” thru 36”• MFG. OF EXTREME SERVICE HEAVY DUTY WHEELS

HUB

S A

ND WHEELS OF EMORY INC

276-944-4900

Hubs & Wheels of Emory Inc.

toll free (800) 255-4109 | www.tvh.com

Spectrum Series II & III Fuel Management • Electric Truck Parts Professional • Basic Hydraulics • Train The Trainer

Think BIG and SAVE on TVHU!Mention this ad when you enroll in any

course and receive 25% off the training price. Hurry, class size is limited.


www.mhnetwork.com Ph 800.447.6901 Fx 800.230.6218 [email protected] OCT13

Atte

ntio

n Po

stm

aste

r:

PLAT

TEVI

LLE,

WI

PAID

2407

Was

hingt

on R

d.W

ashin

gton

, IL

6157

1

Chan

ge S

ervic

e Re

ques

ted

A Di

visio

n of

Woo

dwar

d Co

mm

unica

tions

, Inc

.

PRSR

T ST

DU.

S. P

osta

ge

Perm

it No

. 126

This

is da

ted

mat

eria

l.

PLEA

SE R

USH

Net

wor

kM

ATE

RIA

LH

AN

DLIN

G

The Dealers’ Source For Portable RacksTM

Stock ProgramAvailable on Some Sizes / Designs

Toll-Free: 800/939-3962 Phone: 636/527-1868 Fax: 636/256-8963www.dyna-rack.com [email protected]

Pallet Frames Stack Racks Nestable Racks

View Network Magazine Online:

• Store product up and off the floor preventing product damage.

• Racks store easily with little storage space required when not in use.

• Standard rack designs/sizes can be changed to meet your specific needs.

“Ideal for yourcustomer’s

material handling needs.”

• Pallet Frames• Stack Racks• Nestable Racks

Call today for assistance in your storage needs.

[email protected]

This Issue of Material Handling Network is Sponsored In Part By:

NEXT GENERATIONPOLYURETHANE WHEELS

BREAK THROUGHCHEMISTRYLOWERS MAINTENANCE COSTS

UNPARALLELEDLOAD CAPACITYGO FARTHER, RUN LONGER

GUARANTEED

Toll Free 800 421-1180 www.millenniumtire.com

Keep your fleet on the floor and out of the maintenance shop.

Finally there is a wheel engineered for the demands of

today’s 24/7 warehouses. Falconium® utilizes a revolu-

tionary break through in polymer chemistry to give you

wheels that carry up to 40% heavier loads and can

withstand the internal heat buildup that causes

yesterday’s wheels to fail. �

Falconium® boosts productivity by

reducing downtime and costly

wheel change outs. Contact your

Millennium dealer to setup a test

drive and find out why warehouse

managers across the country are

making the switch to Falconium®.

polyurethane wheels

Mat Hand ad_Layout 1 12/16/11 2:06 PM Page 1

A2 November13 Material Handling Network www.mhnetwork.com 800.447.6901

the SAFE Solution to all your Pallet Rack and Wire Decking needs !

w w w . w i r e w a y h u s k y . c o m

S T O R A G E R A C K SINVINCIBLE®

800-438-5629

800.447.6901 www.mhnetwork.com Material Handling Network November13 B1

As the exclusive distributor of Hubtex sideloaders in North America, Design Storage & Handling, Inc. offers a dedicated team of sideloader experts to tailor any model of the world’s largest and most complete range of long load handling equipment to your specific application.

Our nationwide support team is backed by the single largest sideloader replacement parts inventory not just in North America, but anywhere in the world!

A BETTER MACHINE.PLAIN AND SIMPLE

Fork Carriage Tilt (instead of mast tilt) For higher derated capacity and safe handling at high lift heights

Solid and Robust Lifting Masts With high capacities and extended load centers

Sensitive Single LeversFor operation of all mast functions

Diesel/LPG Engine Options

With the latest Tier ratings

Indoor and Outdoor ApplicationFor combined or pure outdoor use

Fourway TechnologyAllows lengthwise, crosswiseand circle driveHydrostatic

All-Wheel DriveEnsures optimal traction ongradients and in all weather

3 in 1Frontloader, Sideloader and Fourway Sideloader

Capacities from 3,300 to 22,000 lbs

Proportional Valve Technology!nfinitely variable and smooth operation of all lifting mast functions

SAVE UP TO 50% OF VALUABLE FLOOR SPACE!FOURWAY ALL-WHEEL TECHNOLOGY

• In lengthwise drive, the HUBTEX DQ series can quickly transport long material through narrow doors and aisles.

• In crosswise drive, the HUBTEX DQ series can be used as conventional frontloader.

• Circle drive enables a fast turning of the truck.

HIGH-PERFORMANCE-STEERING (HPS)

• Up to 60% faster changeover from longitudinal to crosswise operation compared to competitive steering systems. Saves time, saves money.

• Up to 30% smaller turning radius by means of the load wheels. Saves space, saves money.

(available for the 3049, 3051 and 3052 series)

DESIGN STORAGE & HANDLING designstorage.com [email protected] (800) 548-2839 (540) 898-8636

DSH_MHNetwork3050.indd 1 12/12/12 12:57 PM

B2 November13 Material Handling Network www.mhnetwork.com 800.447.6901

Fork-Co Forks & Attachments...MORE THAN FORKS.

Fork-Co Forks & Attachments

Ph: 888-367-5260 281-692-1667

[email protected]

RDD 404,000 LB Cap.

with FREE SHIPPINGlimited time only

Pallet fork clamps

Hook type and pin type forks, capacities to 110,000 LB. Pin type (shaft type) forks are made up in our Alvin, TX plant from stock blanks.

Fork Spreaders

Quick Detach Fork Spreader & pin type sideshifter manufactured in our Alvin, TX plant.

Fork CoversLoad protection products

Made in Houston, TX

Fork postioners

FORK-CO USA HAS A NEW WEB SITE. VISIT US TODAY AT: WWW.FORK-CO.COM

Find forks, attachments, parts and accessories in the new FORK-CO USA Comprehensive

Catalog for 2013 at www.fork-co.com

800.447.6901 www.mhnetwork.com Material Handling Network November13 C1

CASTERS & WHEELS

STAR of the

CASTER WORLDDuraStar’s product lines include: Casters & WheelsWe manufacture a complete line of casters and wheels ranging from light to Xtreme heavy duty for a wide range of applications including material handling, food service, medical equipment, and the waste industry.

IRON HORSE™ Polyurethane Press-On Lift Truck Tires Premium compound leading edge technology for AC driven equipment. Optimized polyurethane to steel adhesion eliminates bond failures. Greater load capacities and extended service life over rubber tires in the most severe applications. Available in many sizes with 85A and 93A durometers.

Wire ContainersStrong, rugged and versatile. Several sizes are available including our model 15404-04 which is rated at 4,000 lbs. Collapsible and stackable. Available with or without casters.

Engineered to keep you moving.

Scan for official website

[email protected]

Toll Free: 866.532.1698Fax: 816.994.7895

17815 Foster Road #146Liberty, MO 64068

Like & Follow Us @

C2 November13 Material Handling Network www.mhnetwork.com 800.447.6901

The Lowest Cost

Cheap replacement wheels and tires for electric lift trucks

can paint you into a corner with higher operating costs

and more down time. Don’t let cheap prices tempt you.

You do get what you pay for.

Guaranteed life and lower costs!

Test our polyurethane wheels and tires against your

current brand. Calculate your total cost per hour, and if

Thombert is not lower, you get your money back. It’s

that simple.

Paint Yourself Out of a Corner

T H O M B E R T.com

800.447.6901 www.mhnetwork.com Material Handling Network November13 D1

We Make The BesT For Less

phone: 660-465-8572 • fax: 660-465-8573email: [email protected]

Portable Stacking Racks

5th Wheel Wagon Truck

Platform Trucks

Dollies

D2 November13 Material Handling Network www.mhnetwork.com 800.447.6901

800.447.6901 www.mhnetwork.com Material Handling Network November13 9

..

Ind

ustrial-Leading Dealer S

hip N

etw

ork

Total Solution Provider

TAILIFT USAWEST COAST

EAST COAST

WORLDWIDE Wholesale Forklifts

954-768-9875 www.worldwideforklifts.com

www.tailift-usa.com909-930-9801

10 November13 Material Handling Network www.mhnetwork.com 800.447.6901

Rack Deck by DACS, Inc. 800.909.4937 www.rackdeck.com

• Fire Protection• Product Friendly• Uniform Strength

• No Waterfall Edge• Hi-Tech Look• Ergonomically Designed

Punch Up Your Storage Solutions!

FORKLIFTS AND MACHINERY A SPECIALTY

TRUCKLOAD & L.T.L. (less than truckload) SHIPMENTSEXPEDITED SERVICE FOR TIME SENSITIVE SHIPMENTS

Quotes by Phone or EmailNortheast & Southwest:

Erin Knowles ext# 21 [email protected]

National Sales: Meg McCaffery ext# 11 [email protected]

Richard DeMoranville ext# 19 [email protected]

508-991-6660Fx: 508-991-7330www.rldtrans.com

Contact: Harry, Brian, James or Marc in NC — Ph 704/882-3979 Fx 704/882-4215Contact: Bill or Ryan in SC — Ph 843-784-7844 Fx 843-784-7832www.Trans-American.com www.bigforkliftrentals.com

Mail AddressPO Box 399Matthews, NC 28106-0399

(2) TAYLOR T180SYR. 2003, MAST 173/216

WIDE VIEW, 18,000 LB CAP, CUMMINS DSL,

P/S, PNEU TIRES, CAB, S/S, FK POS,

NO SMOKE.

HOIST F180YR. 2000, MAST 112/98,

18,000 LB CAP, DSL, AUTO, 60” FKS, SOLID

TIRES, OHG, NO SMOKE.TAYLOR TECDS300HYR. 1993, MAST 4 HIGH,

30,000 LB CAP, DSL, P/S, PNEU TIRES, CAB, DOUBLE STACKER, 20 X

40 HYD SPREADER.

TAYLOR THD160YR. 1994, MAST

108/122, 16,000 LB CAP, DSL, P/S, 47” FKS, PNEU TIRES, CAB NO DOORS, S/S,

NO SMOKE.

HYSTER H360HDYR. 2003, MAST 162/180

WIDE VIEW, 36,000 LB CAP, PERKINS DSL, 3 SPD P/S, S/S, FK POS, CAB, 96” FKS, NO SMOKE, VERY GOOD TRUCK.

LANCER BOSS L/H3 L80/14/60TV

YR. 2006, MAST 133/236 TSU, DSL, AUTO,

54” FKS, PNEU TIRES, OHG, SLOPE PYLE.

(3) HYSTER H350BYR. 1986-88, MAST

176/204, 35,000 LB CAP, PERKINS DSL, MONO, 96” FKS, PNEU TIRES, CAB, S/S, NO SMOKE,

3 SPD.

HYSTER S135FTYR. 2008, MAST 100/185 TSU, LPG, MONO, SOLID TIRES, OHG, 4 WAYS, NO SMOKE.

TAYLOR TH300LYR. 2004, MAST 18’ FT ULTRA VIEW, 30,000 LB

CAP @ 48” LOAD CENTER, DSL, P/S, OHG,

S/S, FK POS, 91” FKS, GOOD STRONG TRUCK.

TAYLOR TEC155HYR. 1998, MAST 5 HIGH

9’ 6” CONTAINERS, 15,500 LB CAP,

CUMMINS DSL, P/S TRANS, CAB, 20 X 40 HYD SPREADER, NO

SMOKE, STRONG TRUCK.

TAYLOR THD250YR. 2002, MAST

180/216, 25,000 LB CAP, CUMMINS DSL, P/S, 90” FKS, PNEU TIRES,

CAB, S/S, FK POS, NO SMOKE.

(2) HYSTER S155FTYR. 2007, MAST

107/133, 15,500 LB CAP, LPG, 48” FKS, SOLID TIRES, OHG, S/S, FK

POS, NO SMOKE.

HYSTER H190HDYR. 2004, MAST 132/147

WIDE VIEW, 19,000 LB CAP, DSL, P/S, PNEU

TIRES, CAB, S/S.

(2) HYSTER H450H-12EC

YR. 1998-99, MAST 7 HIGH, 9’ 6” CONATINERS,

45,000 LB CAP, CUMMINS DSL, P/S TRANS, 20 X 40 RAM

SPREADER BARS, CAB W/AIR, NO SMOKE,

GOOD STRONG UNITS.

SI NECESITA ASISTENCIA EN ESPANOL CONTACTE

A HEIDY RIVAS

BIG TRUCKS

TAYLOR THD360LYR. 1999, MAST 18’ FT,

36,000 LB CAP, DSL, P/S, PNEU TIRES, OHG,

S/S, FK POS, 3 SPD, NO SMOKE.

DOOSAN D160SYR. 2007, MAST 144/156

WIDE VIEW, 36,000 LB CAP, DSL, P/S, 96” FKS, PNEU TIRES, CAB, S/S,

FK POS, NO SMOKE.

HYSTER S155XLYR. 2005, MAST 84/143,

15,500 LB CAP, LPG, P/S, SOLID TIRES, OHG,

4 WAYS, NO SMOKE.

YALE GLC155CAYR. 2006, MAST 85/144

TSU, 15,500 LB CAP, LPG, MONO, W/FKS, SOLID TIRES, OHG, 3 WAYS, NO SMOKE.

TCM FD70YR. 1993, MAST 157”

WIDE VIEW, DSL, AUTO, 96” FKS, PNEU TIRES,

CAB LESS DOORS, S/S.


1 . 8 0 0 . 8 7 0 . 0 6 8 7 This special opportunity ends November 30th. For hassle-free service, call the Brush Experts today!

• Same Day Shipping with late 5:00 PM (ET) cut off time!

• Free ground freight on orders of $1000 or more!

• Huge inventory! • Top quality! • We drop ship! • Wholesale Only! • Super sale prices on top of already low prices

on 2 or more brushes/brooms!

STOCK UP &

SAVE!

www.mor-value.com

BRUSH & BROOM SALE!!BRUSH & BROOM SALE!!


• Paper Roll Clamps

• Carton Clamps

• Appliance Clamps

• Bale Clamps

• Cotton Clamps

• Pulp Wood Clamps

• Multi Purpose Clamps

• Drum Clamps

• Box Clamps

• Push Pulls & Pushers

• Inverters

• Revolving Clamps

• Rotators

• Fork Clamps

Complete 6 Month Warranty On All Rebuilds

Complete 1 YearWarranty On All NEW Units

L.A. Lift Attachments Inc. For ALL your New or Rebuilt

Lift Truck Attachment Requirements!

682 Fortune Crescent, Kingston Ontario Canada K7P-2T3

E-Mail: [email protected] or [email protected]

Phone: (613) 634-1140 Fax: (613) 634-1109

www.lalift.ca

High Quality Forklift Attachment Rebuilders for Over 35 Years Experience

ATTACHMENTS


SUPERIOR ENGINEERING INC.

ADD A MAST TO ALMOST ANYTHING

SUPERIORENGINEERING

1-800-359-3052WWW.SUPERIORENG.COM


$700 FOR 28 DAYSFor $700 a material handling equipment dealer can rent a 36' long20,000 lb. capacity aluminum yard ramp. Provide a much needed

service to yourcustomers. Rampsin stock forimmediate delivery.

Bay Equipment Co., Holland, Mich., 616-392-1811 or fax 616-392-6238www.bayequipmentco.com [email protected]

We Buy UsedDock Levelers

Trades Considered

Ph: 847/455-7721Fax: 847/455-4419

[email protected] • www.jaybeelift.com

PAPER ROLL

NEW!Rubber Adhered

to Your Clamps

Jay-Bee Offers:

• Quality Rubber Product

• Heat Bonded System to Insure Lasting Adhesion

• New & Used Aluminum Pads with New Rubber Adhered *IN STOCK*

• Carton Clamps Assemblies By using carton clamps users can quickly handle unit loads without expensive pallets.

CARTON CLAMPS

WeAlso

Repair!

REASONABLY PRICEDCALL, FAX or E-MAIL us

your requirements.

No Job is too small or too LARGE for us!Contact Jay-Bee Lift Truck Service for Details

LIFT TRUCK SERVICE9350 Franklin Ave • Franklin Park, IL 60131

RUBBER RUBBERRUBBER

N. Venice, FLMain Office941-488-1994Fax: [email protected]

Liberty, SCParts Office

864-843-5570Fax: 864-843-5571

[email protected]

www.decoequipment.comSpecializing in Refurbished Forklift Attachments and Used Parts.

We Rent & Buy Attachments.

• Cascade • Bolzoni • Long Reach• Brudi• Rightline• Loron• Bolzoni-Auramo

Ô Quality Products

Ô Fast Shipping on used Parts

Ô Large Variety of Products

Ô Large Variety of used Parts

Ô If we don’t have it, we will try our best to get it

melmor Associates, inc.

“World’s Largest Material Handling Distributor”

Since 1963

Wire Baskets Hoists Pallet Racking Conveyor

Steel Containers Self Dumping Hoppers Shop Pans Warehouse Carts

Melmor Associates, Inc. 840 Ann Avenue - PO Box 511 - Niles, OH 44446

330-652-1784 phone - 330-652-1667 fax www.melmor.com

1 9 6 3 - 2 0 1 3

50Y E A R S O F

E X C E L L E N C E

MelmorAssociates, Inc.

USED AND NEW MATERIAL HANDLING EQUIPMENT


2004 Terex 45-325,900 hrs, Superstacker loaded container handler, Cummins dsl,

Dana 36000 trans, Eaton axle, 5 hi stack, rotating spreader, good oper-ating machine checked & updated.

FOB Savannah, GA

Toll Free: 1.800.627.4007 Ph: 910.763.4007 Fx: 910.763.4008

[email protected] 212 S. Water Street, Suite 1-H Wilmington, NC 28401

Intermodal

2004 Kalmar DRS4531Good operating popular model

reachstacker, 20-40 rotating

spreader, Cummins diesel,

Clark transmission.

FOB Newark, NJ

2007 Ottawa YT30-DOTYard Tractor, 11,100 hours,

Cummins and Allison in June.

Also, low hour 2006 YT30

off road ready now!

FOB Savannah,GA

www.ieeforklift.com

2006 Kalmar DCF410-CSGCurrent model available today, Kalmar’s best ever! Only 4,200

limited hrs in back up for automated storage assembly, tier 3 Cummins dsl, get new style delivery today.

FOB Savannah, GA

2002 Hyster HR45-255hi stack reachstacker in good

operating shape, 20-40 rotating

spreader, Cummins diesel with

Clark tranny, shows 9500 hours.

FOB Buffalo, NY

1998 Hyster H450H EC6Good operating 6/7 hi stack

empty container handler, low 7,700 hrs on the clock,

very good operating machine with Cummins diesel & powershift.

FOB West Coast

2004 Capacity TJ5000-DOT

Street legal, 8,800 hours, trailer

Jockey, Cummins Diesel, Allison

transmission. Due in shortly.

FOB Savannah,GA

1995 Fantuzzi RS50 Budget priced 5hi reachstacker with

rotating 20-40 spreader, operating

today with no major problems,

available now, just inspected.

FOB Canada

SOLD

SOLD


Don’t be fooled by the incorrect term CERTIFICATION when the correct or proper term is

CERTIFICATE OF COMPLETION. Many training companies boldly advertise and offer a “train the trainer” certification class that hands you a certificate of completion at the end of their course. There are no accreditation or mandated certification qualifications in order to be a trainer or instructor. There are no government or private agencies that have been approved, endorsed or empowered with certain standardized credentials or qualifica-tions to train instructors and then issue trainer certifications.

The OSHA regulation 1910.178, Powered Industrial Trucks, revised 6/2/2003, paragraph (L)(2)(iii), “Operator Training”, clearly states: (l)(2)(iii) All operator training and evaluation shall be conducted by persons who have the knowledge, TRAINING, and experience to train powered industrial truck opera-tors and evaluate their competence.

The above excerpt does not reference or imply the term CERTIFICATION. The word “TRAINING” can imply many meanings since the word is not defined. We can assume “on the job training” would qualify a person doing the training if they are experienced, capable, com-petent and knowledgeable of the specific equipment and application. With our easy to use safety training kits you can meet OSHA’s compliance requirements.

As an employer, if you choose to ignore the new training rules adopted by OSHA, a minimum fine or penalty of $7,000 for EACH untrained operator can be assessed for non-compliance.

For more OSHA facts go to www.osha.gov

Contact Forklift Safety Training Services, Inc., P.O. Box 60577, Boulder City, NV 89006-0577, Call: 800/494-3225, 702/294-3970, Fax: 702/294-3973, or visit www.forkliftsafety.com

“Train The Trainer...” Certification or Confusion

Safety Corner

www.IndustrialDecals.com 631-758-1532

GIVE US A CALL...

• Customers gladly pay $500-$1000 more for a Painted & Decaled Lift Truck

• We carry lift truck decals required by O.S.H.A., A.N.S.I. & Department of Labor

• We customize decals to fit your specs & needs

• Most kits ready to ship same day

• Add the extra touch to used or reconditioned equipment

• College & Pro Team decal kits

• Capacity Decals

• Equipment I.D. Kits

• Rental Fleet Decals

• OSHA & Ansi Decals

• Safety Decals & Kits

• Company Logo Decals

• Make & Model Decals/Kits

• Custom PM & Mast Decals

Decal Kits for Forklifts & Industrial EquipmentMake More Money on Your Used & Reconditioned Equipment!

Master Detailers Kit $59.00* Buy 4 Get the 5th Free for New Customers

*Special discounts for manufacturers and fleet purchasers*Now open 9AM-7PM Est. time, M-F. Sat 8AM-12PM

“Buy from where OEM’s & Aftermarket Parts Houses buy from!”

Industrial Truck Decals & Marketing, Corp.www.IndustrialDecals.com • 631-758-1532 • [email protected]

*$59 kits up to 8,000 # capacity std. Call for more pricing.

Exclusive USA Distributor:ROADRUNNER RUBBER CORP.

PO Box 11291 / 4824 Downs Ln., Houston, TX 77293

(800) 231-6691(713) 697-0633 • fax (713) 697-6233“We build the world’s toughest tire” www.roadrunnertires.com

•Threestagesteelbeadconstruction•Naturalrubbercompoundthatresistscuts andheatbuild-up•Highlyelasticcenterprovidingexcellentshock reductiontodriver&load

•Naturalrubberconstruction•Flatfootprintfortraction•Smooth&tractiondesigns•Longwearing&coolrunning• Fullrangeofsizes

TRAXTER: UNCOMPROMISED QUALITYTraxterPPS&PRESS-ON.Experiencethe

differenceofatechnicallyadvancedtirethatgivesoutstandingresultseachtime,everytime.

TRIDENT TRAXTER solid tires PneumaticShaped&Press-OnSolids

ManufacturedinIndia

Enforce Speed Limits In Your Plant

Control the travel speed of your trucks with:

S.L.O.W. CORPORATION“TRAVEL SPEED LIMITER”

Two models now availableOriginal TSL-1 or “New” TSL-2

For information Contact:S.L.O.W. Corporation

P.O. Box 454 • Manitowoc, WI 54221PH 920-683-9502 • FAX 920-683-9511

Email: [email protected]*U.S. Patent #5,652,486


SOLIDS03000 YAL GLC030AFNUAE082 04 82/TSU LPG AUTO S/S-4WAY-JUST ARRIVED-CHECKING .......................... $4,25005000 MIT FGC25N-LP 09 77/169 LPG AUTO S/S- LOW HOURS ............................................................. $6,95005000 KOM FG25ST-11 96 83/240 LPG AUTO S/S-QUAD-CHECKING ..................................................... $3,20008000 HYS S80XL-BCS 01 83/TSU LPG AUTO S/S-F/P-6000 HOURS-DIRTY-CHECKING ....................... $4,85008000 HYS S80XL-BCS 00 83/TSU LPG AUTO JUST ARRIVED CHECKING ............................................... CALL08000 TOY 7FGCU-BCS 06 197/TSU LPG AUTO 4 WAY-2 COMING ........................................................... $10,80008000 CLK C500S80 89 83/170 LPG AUTO S/S-CLEAN-SMOKE .......................................................... $2,450

PNEUMATICS 06000 DOS D30S 03 100/STD DSL AUTO S/S-CAB-AIR COND-CLEAN ............................................ $7,85008000 HYS H80XM 00 85/TSU LPG AUTO S/S-CHECKING-JUST ARRIVED ...................................... $8,25013500 HYS H135XL 00 127/173 DSL AUTO CUBE HANDLER-CHECKING ........................................ $13,50020000 TAY Y-20-WO 73 156/STD LPG AUTO CLEAN-CHECKING .......................................................... $9,500

3 WHEEL ELECTRICS 02500 HYS J25B 93 92/203 36V SCR BATT-NEWER PAINT ....................................................... $1,65003000 CRW 30SCTT 92 83/190 36V SCR BATT-S/S-EXTRA CLEAN-LOW HOURS ......................... $3,25004000 HYS J40XMT 99 83/TSU 36V SCR BATT-S/S ........................................................................... $2,85003000 YAL ERP030TDN36E083 90 83/TSU 36V SCR BATT-3RD VALVE-NO S/S ............................................... $1,85004000 YAL ERP040TDN36SE083 92 83/TSU 36V SCR BATT--RUNS & WORKS ................................................... $1,650

4 WHEEL ELECTRICS 03500 HYS E35XL 94 77/174 36V SCR BATT-RUNNING ................................................................ $2,65004000 HYS E40XMS 01 83/TSU 36V SCR BATT-RUNNING ................................................................ $3,25005500 HYS E55XL-33 92 84/TSU 36V SCR BATT-RUNS & WORKS-CHEAP ....................................... $2,25006000 HYS E60Z 08 92/264 48V AC BATT-”QUAD”-S/S ............................................................. $4,950

WALKIE PALLETS 04000 YAL MPB040EAN24T2748 09 27 X 48 24V SCR BATT-INDUSTRIAL-CHARGER ........................................ $1,85004000 CRW 40GPW-14-4 98 27 X 48 24V RES CHECKING ........................................................................ $1,25004000 RAY 102T-F45L 07 27 X 48 24V SCR POWER PACK .................................................................. $1,25004000 TOY 6HBW20 04 27 X 48 24V SCR POWER PACK ..................................................................... $95004500 P.M RMX-45 00 27 X 48 12V RES BATT-RUNS & WORKS ....................................................... $850

WALKIE RIDERS 06000 HYS B60Z 02 27 X 48 24V SCR BATT .................................................................................. $1,25006000 HYS B60XT 00 27 X 48 24V SCR BATT ..................................................................................... $75006000 CRW P4000-60 03 27 X 48 24V SCR BATT-1800 HOURS-CHECKING ........................................ CALL

WALKIE STRADDLES 03000 CRW 30WTF 92 83/130 24V SCR BATT-VERY CLEAN-50” ID -58” OD ................................. $1,650

WALKIE REACH 03000 CRW 30WRTT-S 95 71/152 24V SCR BATT-POWER TILT-GOOD CONDITION ......................... $2,850

REACH TRUCKS 03000 CRW RR5020-45 98 95/210 36V SCR BATT-S/S-CLEAN-34” ID-3075 H0URS ............................ $3,65004500 CRW RR3020-45 95 119/TSU 36V SCR BATT-S/S-STRAIGHT ....................................................... $3,450

RIDER COUNTER BAL 03000 CRW RC3020-30 01 83/TSU 36V SCR BATT-S/S-CLEAN ............................................................ $3,45003500 CRW RC3020-35 98 83/190 36V SCR BATT-SS- RET OHG-EXTRA CLEAN-1600 HRS ............. $3,650

MISCELLANEOUS 03000 TUG MG307LP 04 N/A LPG AUTO JUST ARRIVED CHECKING ............................................... CALL

WE NEED EQUIPMENT & ATTACHMENTS

Visit our website for pictures! www.morrisonlifts.com

J.W. Morrison EquipmentJ.W. Morrison EquipmentNew Address:J.W. Morrison Equipment800 Cenco BlvdClayton, NJ 08312

Ph: 856-243-5108

E-Mail: [email protected]


Heavy Machinery Movers Cart200 Ton Capacity • 20’L x 10’W x 2’H

Dual Steering

Direct lift, no chains

Low profile 8’ - 10” high x 16’ - 7” long x 8’ - 0” wide

Optional telescoping rigging boom solo matic tires

REMANUFACTURED RIGGER SPECIALS80,000 lb. to 120,000 lb.

at 24” L.C.

Direct lift, no chains

Mini-Rigger Special ™

• 30,000 lb. Capacity • Unmatched Versatility

• 96” High x 138” Long x 58” Wide • 96” Wheel Base • Patent Pending

FOLLOW THE REST, OWN THE BEST

Bristol Manufacturing4416 N. State Rd. (M-15) Davison, MI 48423

Phone: 810.658.9510 Fax: 810.653.5749Contact Vic or Ray

www.bristolmanufacturing.com


It’s all about the compound. Designed to tackle two of the most extreme conditions, the cold condition expert Cushothane® EZ™ and the heavy load specialist Cushothane® XL™ are the final answer for top material handling professionals.

CUSHOTHANE® Polyurethane Tires & Load Wheels

40 Scientific Rd, Warren, PA 16365

©2013 Superior Tire & Rubber Corp. All Rights Reserved.

1.800.289.1456 www.SuperiorTire.com

ManagementSystemsRegisteredto ISO 9001

Cushothane® EZ™

• Cold or wet storage specialist • High traction & low rolling resistance • High chunk resistance • Softest ride

Cushothane® XL™

• Heavy load and high speed specialist • Revolutionary XL3™ bonding technology - No Bond Failures Guaranteed*

• Longest life even in harshest conditions • Reduces flat spots, provides higher stability

Applications

Merchandise Distribution CentersGrocery Distribution Centers

Rough/Uneven Floor ConditionsFreezer/Refrigeration (Cold Storage)

ApplicationsGrocery Distribution Centers

Bottling Plants & BreweriesSteel Mills & High Heat Conditions24/7 Operations where all else fails


for REMAN means...BEST FOR SPENT

COMPETITIVE PricingBEST Core Policy - BEST Warranty

YOUR CUSTOMER’S SATISFACTION

www.charnor.com 800-447-3967

A PARTNERSHIP with

Best Quality H Best Service H Competitive Pricing

ENGINES TRANSMISSIONS STEER AXLES DRIVE UNITS CYLINDER HEADS


Industry News

GSG Financial Launches End User and Vendor Finance Business UnitsGSG Financial, a leading independent equipment lessor, announced the formation of two new business units, End User Finance and Vendor Finance.

“Central to GSG’s growth is its ability to build best-in-class sales teams with proven expertise in each of these markets,” said GSG Financial President Kiran Kapur. “GSG has the flexibility to originate transactions across a broad range of equipment types which is essential to meeting the needs of end users.” The End User Finance Program offers customized financing packages with flexible payment and term options. The keystone of the End User platform, GSG’s Master Lease Program, stream-lines the leasing process for key capital acquisitions.

GSG’s Vendor Finance program extends partnerships to manufacturers, vendors and resellers. GSG’s sales representa-tives leverage their sector expertise to tailor targeted financing models to

vendors. “GSG has proven capabilities in delivering turnkey customer financing programs to vendors across a variety of industry sectors,” said Kapur. The establishment of these two business units will allow GSG to focus on sales and service delivery unique to the needs of each channel. We are excited to be investing in talent to meet those needs.”

“GSG Financial continues to build its platform for sustainable growth,” said GSG Financial CEO Andrew Bender. “Combined with our recent investments in people and infrastructure, our increased strategic focus on these markets provides the vision and structure required to attract top sales people to service our current and future customers.”

For more information on GSG Financial, visit www.gsgfinancial.com or call 718/243-2243.

CROWNS FOR SALE

Contact Bob Harris: 205-637-7922

midwestLIFT TRUCK SALES, INC. Fx 205-637-7486

[email protected]

MODEL QTY YEAR MAST COND/COMMENTS 40TSTF 1 2004 167/303 72 P/S Turret Trk, 72”aisle, rail guidedRD5725-30 2 2009 131/300 36 P/S Deep Reach, S/S, 34-45”, AC, 16” batteryRD5220-30 1 2002 95/210 36 P/S Deep Reach, S/S, 42”, 14” batteryRR5220-35 1 2005 95/210 36 P/S Rider Reach, S/S, 34-45” 12” batteryRR5220-45 1 2002 131/300 36 P/S Rider Reach, S/S, 34-45”, 16” batteryRR5220-45 1 2002 131/300 36 P/S Rider Reach, S/S, 42-53”, 18” batteryRR5220-45 1 2002 119/270 36 P/S Rider Reach, S/S, 42-53”, 16” batteryRR5220-45 1 2001 119/270 36 P/S Rider Reach, S/S, 34-45”, 16” batteryRR5220-35 1 2001 119/270 36 P/S Rider Reach, S/S, 42-53”, 16” batteryRR5020-45 2 2000 131/300 36 P/S Rider Reach, S/S, 36-47”, 16” batteryRR5020-45 1 2000 140/321 36 P/S Rider Reach, S/S, 34-45”, 20” batteryRR5020-45 3 1999 119/270 36 P/S Rider Reach, S/S, 34-45”, 16” batteryRC5530-30 2 2007 83/190 36 P/S Std-Up Rider, S/S, 18” batteryRC3020-30 2 2006 83/190 36 P/S Std-Up Rider, S/S, 18” batteryRC3020-30 3 2004 83/190 36 P/S Std-Up Rider, S/S, 18” batteryRC3020-35 1 2002 83/190 36 P/S Std-Up Rider, S/S, 18” battery, 4 way, HydsRC3020-40 5 2002 84/240 36 P/S Std-Up Rider, S/S, 20” battery, 4 way, QuadRC3020-30 1 2002 89/208 36 P/S Std-Up Rider, S/S, 16” battery FC4020-50 1 2005 84/240 36 P/S 4 Wheel Sitdown, S/S, batteyFC4020-50 1 2005 83/188 36 P/S 4 Wheel Sitdown, S/S, battery FC4020-50 1 2004 83/188 36 P/S 4 Wheel Sitdown, S/S, battery SC4520-30 2 2007 95/226 36 P/S 3 Wheel Sitdown, S/S, AC, 20” battery SC4020-35 1 2004 83/190 36 P/S 3 Wheel Sitdown, S/S, batterySC4020-35 2 2004 83/190 36 P/S 3 Wheel Sitdown, S/S, 20” batterySC4040-40 3 2004 83/190 36 P/S 3 Wheel Sitdown, S/S, 4 way, 25” battery SC4040-40 2 2002 85/246 36 P/S 3 Wheel Sitdown, S/S, 25” battery, Quad SC4040-35 1 2002 83/190 36 P/S 3 Wheel Sitdown, S/S, 25” batterySP3420-30 2 2004 119/276 24 P/S Stockpicker, battery SP3220-30 2 2003 119/276 24 P/S Stockpicker, battery, 60”platform SP3020-30 2 2001 119/276 24 P/S Stockpicker, battery SP3020-30 1 2001 95/210 24 P/S Stockpicker, battery SP3020-30 4 1997 107/240 24 P/S Stockpicker, batterySP3020-30 4 1996 119/276 24 P/S Stockpicker, batteryPE4500-80 3 2010 28x96 24 ---- End Rider Pallet Trk, AC PE4000-80 5 2005 28x96 24 ---- End Rider Pallet Trk, battery SLT 30 1 2005 89/205 36 P/S Drexel Swing Mast, 36v battery SLT 30 1 2000 89/205 36 P/S Drexel Swing Mast, 36v battery

Caterpillar T200106”/120” Standard, LPG, 96” Forks, Stock # 1C200001

FOB: NLA - Little Rock, AR

3333 Mount Prospect RoadFranklin Park, IL 60131

Geoff Dietz 630-993-4892Jake Smith 630-993-4822

[email protected]

2006 Hyster S155XL298”/182” TSU, Lights, 3168 Hrs, Fresh Paint, 2 Spd Auto, Stock #: WC150-006

2007 Clark ESX1583”/188” TSU, S/S, 36 V, 1800 Hrs, Lights, Forks

Stock #: NC30-018

2005 JLG 2030ES, Non-Marking Tires, 368 HrsStock #: WS020-001

2013 Lowry L350D 100”/108” Std, S/S, F/P, LP Gas, 96” Fks,

35,000 Lbs Cap, Stock #: 2C350006

2004 JLG E300AJPJib, Non-Marking Tires, 950 Hrs

Stock #: WBK30-012

2004 JLG 1930ES70 Hours, Ext Dek, Fresh Paint,

Non-Marking Tires, Stock #: WS019-010

2008 Clark CGC4089”/188” TSU, S/S, Strobe, Mirrors

Stock #: WC080-005

2005 Skytrak 8042 4x4, Side Tilting Carriage, 42” Forks

Stock #: WT082-001

2011 Clark C32C189” TSU, S/S, LightsStock #: WC065-001

2007 Clark ECX2588”/205” TSU, S/S, LBR, Forks

**Multiple Units Available**

NATIONAL LIFT OF ARKANSAS601 West Dixon RoadLittle Rock, AR 72206

www.nlofa.com

NATIONAL LIFT OF MEMPHIS5625 East Raines Road

Memphis, TN 38115www.nlofm.com


COMPROMISEWHY

999 Wells St. Lake Geneva, WI 53147 PH: 888-734-7687 FX: 262-348-5570 [email protected] By Our Perfection Performance Guarantee

The Stellana Optima bolt on tire system will revolutionize your facility operations and maintenance costs.

•No more costly trip charges

•No more press-on charges

•No more hub purchases

OPTIMIZE•No more walk-offs

•No more cracked bands

• ...and no more downtime!

Optima


A Division O

f Connell F

inance C

ompany, Inc.

200 Connell Dr.Berkeley Heights

NJ 07922

Ph: 908/673-3700Fax: 908/673-3800

View our complete inventory at

www.usedforktrucks.com

2008 Caterpillar E6000AC 6,000 lb. cap, 82”/129” FFL SS/FP, 42” forks, 48 volt B & C

2009 Hyster S155FT 15,500 lb. cap, 84”/94” std SS/FP, 48” forks, diesel

2006 Toyota 7FGU30 6,000 lb. cap, 84”/130” std S/S, 48” forks

2008 Hyster H80FT 8,000 lb. cap, 79”/174” triple S/S, 42” forks, cab

2006 Taylor TC0300S 30,000 lb. cap, 121”/120” std F/P, 72” forks, diesel

2010 Nissan PFD100Y 10,000 lb. cap, 90”/169” triple SS/FP, 60” forks, diesel

2010 Nissan PFD60 6,000 lb. cap, 85”/169” triple SS/FP, 42” forks, diesel

Connell Equipment Leasing Company

Forklifts For Sale!Forklifts For Sale!

Remanufactured Transmissions, Engines, Torque Converters, Steer Axles,

Overhaul Kits and Aftermarket Parts for:

•MaterialHandling •Construction •AgriculturalEquipment

Authorized Distributor Authorized Dealer Authorized Dealer Authorized DistributorAuthorized Distributor

[email protected]

Genuine Cummins/ReCon Components

CarpetStorage

Comes standard solid or with open area deck.Lowered interior beams offer deck support.Allows deep span decking for continuous

deck surface.

Rack Deck www.rackdeck.com

800.909.4937Toll-Free Fax: 800.909.4938

Punch Up Your Storage Solutions


West Point Rack“We don’t just promise…we deliver!”

13591 Chandler St. • Omaha, NE 68138866-245-3630 • Fax 866-245-3631

[email protected] • www.westpointrack.com

For Excellent Service Contact

Reva Bily

• Quotes in 2 hours on most requests

• Delivery in 2-3 weeks on most orders

• Quality

• Dependability

• Satisfaction

Cantilever Structural PalletPortable Stacking

West Point Rack is one of the fastest growing companies in the industry. Our cus-tomers recognize quality products, dependability of service and competitive pricing.

Our Primary Goal is to support our dealers, satisfy their customers, earn trust and be the “Vendor of Choice” for rack products and racking systems.

We offer a full line of light duty, intermediate duty, heavy and extra heavy duty cantilever racks. We provide multiple configurations of a wide variety of stacking racks. Our structural pallet racks can be configured for a wide range of applica-tions.

West Point Rack has the products that generate solutions for your storage needs.

We also offer specialty products such as bar cradle trucks, drum racks, hand carts and other specialty transport and storage products. Give us a call at 866.245.3630. We may have what you need. Look forward to hearing from you.

Cantilever Racks • Structural Pallet RacksPortable Stacking Racks • Specialty Transport & Storage Products


A Clear Solution to a Common Problem™

ClearCap™ forklift coversMade of rigid, high impact, non-yellowing polycarbonate plasticReasonably priced protection from rain, snow, dust & sunMany sizes available to fit various trucks, in clear & tinted versions

Easy installation & removal! Keeps the seat dry!

Every lift should be equipped!ClearCap™ The domed cover with channels & gutters eliminates cascading water. This alternative to shrink-wrap, plywood & cardboard provides greater comfort & safety. OSHA standard 1917.43 (e) (1) (ii) clearly states, “Overhead guards shall not obstruct the operator’s view.”

Call us toll-freeWy’East Products1-888-401-5500www.clearcap.com

Our techs’ many years of experience with ring and pinions, planetaries, and pinion

gears make AIT a natural choice to supply the reman drive axle your customer needs.

WE KNOW TRANSMISSIONS... AND WE KNOW DIFFERENTIALS...

AND WE KNOW DRIVE AXLES!

American Industrial Transmission Inc.

20395 Hannan Pkwy. Walton Hills, OH

800-588-7515 • Fx 440-232-8142

[email protected]

www.aittransmission.com

DRIVE AXLESDRIVE AXLESREMANUFACTURED


What Are You Smoking?GM 4.3L Analyzed By: John Gelsimino Jr. of All Industrial Engine Service

Tech Talk

Have you ever had a customer with a dirty environment? Have you ever seen a forklift that uses the GM 4.3L engine? Only if you’re in the forklift business! You may also have had experience with dirt and debris dusting a customer’s engine. Some engines and accessories are more prone to air leaks which can be the killer of any new or remanufactured engine. When an engine is dusted it creates a serious liability for the party that installed the engine. Since topics regarding the GM 4.3L engine have been a huge success I thought I would outline several critical areas that are prone to ingesting dirt and how smoke testing an engine after installation can solve this problem.

What is DUSTED? It is the failure of an engine due to dirt ingestion. When an engine has an air leak on the intake side of the engine it can turn your engine into a vacuum cleaner. Any air leak after the air filter will allow dirt to enter the engine and rapidly wear out the engine’s core components.

What is SMOKE TESTING? It is a smoke diagnostic machine that fills the intake system with pressurized smoke. When performed with the engine off, it is as

simple as looking for smoke to find your leaks. Smoke diagnostic machines come in many different makes and models. Ask your local tool guy for a price and opinion as to which machine is best for you.

I know what you’re thinking – “If I need to find an air leak I’ll just spray 17 cans of carb clean, brake clean or ether around the intake areas and listen carefully. I don’t need some fancy machine” Just to remind everyone – the new tier 1,2,3,4,5,6,7,8,9,10 GM 4.3L engines are computer controlled with fancy mixers and throttle bodies that have more areas to seal and leak. The computer also compensates for so many different variables that you may never notice a small leak that could completely destroy your engine.

We have recently worked with a customer who has a large fleet of forklifts that run the GM 4.3L engines. They have several areas in their facility where there is a super fine abrasive powder constantly in the air. By using a smoke tester on several different units we have learned volumes as to where the GM 4.3L engines are capable of ingesting dirt and debris. The following is a list of our findings in no particular order:

• We have found leaks around the EGR valves across all tier level configurations.

• Trucks with the big fancy Cyclone Super-Duty - High Velocity – Extra Volume Pre-Cleaners mounted at the top of the overhead guard (OHG) can still have problems. We have found smoke coming out of the taillights, filter sealing surface to OHG and even tapped holes in the side of the OHG that are left open from the factory. Doesn’t it seem strange to have a $4 million dollar pre-cleaner and immediately after that have direct paths to the filter? Remember that most OHG’s are used to channel the air into the filter because this is the highest point away from the ground to intake air.

• We witnessed air cleaner hoses and PCV connections that were pressed on good and tight but would leak if they were not properly clamped.

• Here is a good one – a brand new mixer out of the box had loose internal bolts.

Continued on page 27

ROLLBACK INDUSTRIAL CARRIERHeavy Equipment

Lumber Body

Container/Storage

Units in Stock

Standard•20,000,30,000&40,000lb.capacity•20-28ft.length•96in.wide•28in.bulkhead•Outsidepocketswithrubrail•Hardwoodorsteelfloor•Ramseywormgearandplanetarywinches•2Doubleactionliftcylinders•Doubleactionrollbackcylinder•Heavydutysubframe•Rollers-greaselessbearingw/stainless pinsorwearpads

Options•102in.wide•Flooroptions•Pusheraxles•Hydraulicstabilizerbar•Chainracks•Siderails•Cabheightbulkhead•Hydraulicfoldingramp•Toolboxes•Remotecontrol•Lumberbodyw/hydrauliccontrolledrollers

Carlinville Truck Equipment, Inc.1900 N University P.O. Box 512

Carlinville, IL 62626

[email protected]


Continued from page 26

These are blind holes between the plates that hold the mixer together. It was obviously leaking and smoke came pouring out of the sealing area.

• The tier 2 o-ring and sleeve that seal the mixer base and throttle body have also been found to leak at the seam. Be sure to replace both the bushing and o-ring after disassembling these items. (See Photo Below)

• The tier 3 mixer doesn’t come with the fitting - only a plug on the air horn side. This customer’s techni-cian removed the plug and forgot to move the plug to the open hole on the other side. This completely destroyed a new engine in 24 hours. So remember to re-install the plug when you swap your fittings. (See Photo Below)

• This customer also believes that over changing the air filter in harsh environments is a bad idea. He runs an air flow gauge on all of his trucks and feels that some restric-tion of the filter is actually a good thing. Only when the air flow gauge indicates a restriction will they change the air filter. I cannot confirm this as a best practice but I thought it was interesting to at least mention and could be some-thing for everyone to consider.

Engine failures due to dirt ingestion are easy to diagnose. The cylinder walls will have a ridge or sometimes in severe cases one ridge for each piston ring. When looking at the lower portion of the cylinder bore you will see the exact area where the oil control ring stops. It will look like the cylinder wall has been glass beaded and below the line will be the perfect cross hatch. The other sure sign of dirt ingestion can be found on the valve stems. Swirl like patterns and or wear ridges could be seen on most all of the valve stems. Dirt does not discriminate – once it gets into the manifold it is distributed evenly in each cylinder depending on the manifold design.

Customers find it hard to believe that one simple air leak can completely wipe out a brand new or reman engine. For this reason we are strong advocates of smoke testing all engines after installa-tion. There is no better way to make sure that everything is air tight and that your profit on the job is protected from future dirt ingestion liability.

If you have a customer that is experi-encing dirt ingestion failures – consider the smoke tester – you’ll be shocked at what you find. The GM 4.3L engine will be around for many years to come and you are bound to eventually run in to these types of problems. Our job at All Industrial Engine isn’t to just sell reman engines but to assist customers in solving their engine related service problems. We are the specialists – specialist!

If you have any questions regarding this article or any other Tech Talk article please feel free to give me a call at any time – we are always here to help (877) 303-LIFT.

www.tvh.com | www.irmn.com | (800) 255-4109

Over 4500 new and remanufactured units

Includes a verifi ed test sheet

with each unit

100% factory tested

Manufactured in North America


FORKLIFT PRO

THEFORKLIFTPRO.COM

9801 Industrial Drive • Pineville, NC 28134Contact us by email:Bill Zemak - [email protected] • Alberto Saavedra - [email protected] Caldwell - [email protected] • Tim Smith - [email protected] Vince Strum - [email protected] • Terry Lee - [email protected] ¡ Se Habla Español!

VIEW THE FULL INVENTORY AVAILABLE ONLINE!

CALL THE PROS: 704.716.3636

IC CUSHIONS A/C ACC30LPS 3000 1978 80/185T LP Gd cond/AC/3Way/ForksCat GC18K 3500 1999 83/188T LP Gd cond/S-S/Forks/MitsiCat T40D 4000 1986 83/129S LP Gd cond/Cat/ForksClark C500-25 2500 1978 71/153T LP Gd cond/3-wayDaewoo GC30S-2 6000 1997 110/168S LP Gd cond/S-S/Forks/NIHyster S30FT 3000 2007 82/189T LP Ex cond/S-S/FE/42” Forks/CL/MonHyster S30FT 3000 2006 LP Gd cond/MZ/Lever/SL/No MastHyster S35FT 3500 2009 82/187T LP Ex cond/S-S/42” Forks/MZHyster S50FT 5000 2009 84/240Q LP Ex cond/S-S/42”Forks2- Hyster S50FT 5000 2009 82/189T LP Gd cond/S-S/Forks/MZ/LeverHyster S50FT 5000 2009 85/130F LP Ex cond/S-S/F2/SLHyster S50FT 5000 2008 83/126F LP Gd cond/S-S/Forks/MZ/LeverHyster S50FT 5000 2008 83/240Q LP Gd cond/3Way/Attach/F2/LeverHyster S50FT 5000 2008 82/189T LP Ex cond/3-way/MZ/ML/Mon/LPS2- Hyster S50FT 5000 2007 82/189T LP Ex cond/S-S/42” Forks/MZ/ML/LeverHyster S50FT 5000 2007 82/189T LP Gd cond/4Way/S-S F-P/Forks/Lever/CL/GM/Paint2- Hyster S50FT 5000 2007 83/129F LP Gd cond/Bad Engine/GM/3-way/ML/MonHyster S50FT 5000 2006 77/171T LP Gd cond/S-S/ForksHyster S50FT 5000 2006 83/130F LP Ex cond/4-way/MZ/ML/MonHyster S50FT 5000 2005 85/181T LP Gd cond/4Way/S-S/Forks/F2/SLHyster S60FT 6000 2006 88/187T LP Gd cond/4-way/F2/ML/Mono/No Forks2- Hyster S70FT 7000 2009 84/181T LP Ex cond/4-way/No AttachmentsHyster S70FT 7000 2008 84/181T LP Ex cond/S-S/42” Forks/GM/Lever/Small Chassis/SLHyster S70FT 7000 2007 88/187T LP Ex cond/S-S F-P/LBR/42” Forks/N-M Tires/ML/LeverTCM FGC15T8T 3000 1993 100/216T LP Gd cond/S-S/42” Forks/Lever/NissanToyota 7FGCU30 6000 2005 86/187T LP Gd cond/S-S/48” Forks/Toyota2- Toyota 8FGCU25 5000 2007 83/188T LP Ex cond/DEMO/S-S/42” ForksToyota 42-6FGCU25 5000 1999 110/168S LP Gd cond/S-S/Forks/ToyotaYale GLC030VX 3000 2007 LP Gd cond/FE/S-S/ML/No MastYale GLC030VX 3000 2006 82/126S LP Ex cond/S-S/FE/42” Forks/MLYale GLC040VX 4000 2007 82/189T LP Gd cond/S-S/Forks/F2/Lever/CLYale GLC040AF 4000 2003 82/189T LP Gd cond/S-S/Forks/F2/Lever/CLYale GLC050VX 5000 2005 100/288Q LP Ex cond/S-S/F2/42” Forks/ML2- Yale GLC050VX 5000 2005 83/240Q LP Ex cond/S-S/F2/42” Forks/ML2- Yale GLC050VX 5000 2004 82/189T LP Ex cond/S-S/F2/ML/Lever/42” ForksYale GLC050RG 5000 2001 82/189T LP Gd cond/S-S/F2/CL/Lever/Forks2- Yale GLC060VX 6000 2008 85/182T LP Gd cond/S-S/F2/Forks/Lever/CL3- Yale GLC060VX 6000 2007 92/200T LP Ex cond/S-S/Forks/F2/Lever/CL5- Yale GLC060VX 6000 2005 85/122F LP Ex cond/S-S/F2/CL2- Yale GLC070VX 7000 2008 86/124S LP Ex cond/F2/ML/3-way3- Yale GLC070VX 7000 2007 85/181T LP Ex cond/3rd Valve/Forks/GM/Lever/SL4- Yale GLC070VX 7000 2006 85/181T LP Ex cond/3rd Valve/ML/GM/Forks2- Yale GLC070VX 7000 2006 87/129S LP Ex cond/3-way/F-P/GM/Lever/CL/54” Forks

IC BIG CUSHIONS 10/15/13 10000 2007 99/206T LP Ex cond/S-S/GM/48” WP Forks/BCS2- Cat GC55KS-1 12000 2005 88/172T LP Ex cond/4Way/Mitsi/48” Forks/MonCat GC70K 15500 2000 86/148T LP Ex cond/3-way/Mitsu/72” ForksHyster S80FT 8000 2008 85/173T LP Ex cond/4-way/ML/Mon/LPS/Bent OHGHyster S80FT 8000 2007 85/173T LP Ex cond/4-way/ML/Mon/LPSHyster S100XM 1 0000 2005 99/136F LP Ex cond/GM/3Way/100D Rotator/48” Forks/LeverHyster S100XMBCS 10000 2005 99/136S LP Gd cond/S-S/48” Forks/GM6- Hyster S120FT 12000 2008 85/163T LP Ex cond/4-way/GM/Lever/CL/No AttachmentsHyster S120FT 12000 2008 92/185T LP Ex cond/4-wayMon/GM Vortec/S-SHyster S120FTS 12000 2008 108/220T LP Ex cond/4-way/GM Vortec/90F PRC 10-60Hyster S120FTS 12000 2008 83/110S LP Ex cond/3-way/NO S-S/SL/48” Forks/MonHyster S120FT PRS 12000 2007 100/208T LP Ex cond/4-way/Mono/ML/GM Vortec/90F-RCS2- Hyster S120FT PRS 12000 2007 83/163T LP Gd cond/5Way/Cas 90F PRC/ML/GM/MonHyster S120FT PRS 12000 2006 100/208T LP Ex cond/4-way/GM/Mon/MLHyster S120XM 12000 2005 82/112S D Gd cond/4Way/Perkins/MonHyster S135XL2 13500 2006 85/144T LP Ex cond/GM Vortec/Mon/S-SHyster S155FT 15500 2008 88/149T LP EGd cond/4Way/GM/Lever/CLHyster S155FT 15500 2007 87/94S LP x cond/3rd Valve/CL/Mon/53” Forks BENT OHGHyster S155XL2 15500 2006 105/199T L Ex cond/Lever/4-way/S-SHyster S155XL2 15500 2005 106/134S LP Ex cond/Cab/3-way/48” ForksTaylor THC300S 30000 2003 135/144S LP Ex cond/GM 5.7L/4-way/S-S FP/72” Forks2- Taylor THC300S 30000 2003 126/121S LP Ex cond/GM 5.7L/4-way/S-S FP/72” Forks/PAINTEDToyota 42-6FGCU15 3000 1998 82/189T LP Gd cond/S-S/Engine Issue2- Toyota 7FGCU35 BCS 8000 2009 87/124S LP Ex cond/S-S/ForksToyota 7FGCU35-BCS 8000 2007 88/132F LP Ex cond/3rd Lever/GM/42” Forks/BCS/Bad tiresToyota 7FGCU45 10000 2003 93/187T LP Gd cond/3-way/42” Forks/ToyotaYale GLC080VX 8000 2008 100/206T LP Ex cond/Wide S-S/42” Forks/GM/Lever2- Yale GLC100VX 10000 2007 98/202T LP Ex cond/GM/S-S/48” Forks/Lever/CLYale GLC100SVX 10000 2006 100/208T LP Ex cond/GM/S-S/Forks/BCSYale GLC120VX 12000 2010 86/114S LP Ex cond/4-way/GM Vortec/ML/Mono/Cas 90F PRC/10” to 60” RR2- Yale GLC120VX 12000 2009 84/111F LP Ex cond/4-way/ML/GM Vortec/CabYale GLC120VX 12000 2008 106/220T LP Ex cond/4-way/S-S F-P/GM Vortec/SL/Mon/Forks

IC PNEUMATICS Cat P5000 5000 2009 84/188T LP Ex cond/S-S/42” Forks/Mitsi/Bad Head GasketCat P6000 6000 2006 87/186T LP Ex cond/S-S/Forks/MitsiCat GP35K 8000 2003 94/189T LP Gd cond/3Way/Mitsu/42” ForksCat DP40K 8000 2005 100/131S D Gd cond/Duals/Mitsi/Wide S-SClark CMP50SD 10000 2006 85/177T D Ex cond/Duals/Wide S-S/72” Forks

Hyster H40FT 4000 2009 83/129F LP Ex cond/3-way Valve/Cab/SL/Mon7- Hyster H40FT 4000 2008 83/189T LP Ex cond/4Way/Mon/ML3- Hyster H50FT 5000 2009 84/189T LP Ex cond/Single Double/F2/LeverHyster H50FT 5000 2008 84/189T LP Ex cond/S-S/Forks/MZ/Lever/MLHyster H50FT 5000 2007 86/130F LP Exc cond/3Way/MZ/Forks2- Hyster H50FT 5000 2005 84/189T LP Ex cond/S-S/Forks/Mon/GM/SL2- Hyster H50FT 5000 2005 84/189T D Ex cond/S-S/Block Forks/Yanmar/Mon/14020 has Duals3- Hyster H50XM 5000 2004 95/150S D Gd cond/S-S/Block Forks/Duals/Perkins/MonHyster H50XM 5000 2003 82/189T LP Gd cond/3-way/No Attachments/CL/Lever/MS Small Parts2- Hyster H50XM 5000 2002 95/150S D Gd cond/S-S/Block Forks/Perkins/MonHyster H50XM 5000 2001 95/150S D Gd cond/S-S/Block Forks/Duals/Perkins/MonHyster H50XM 5000 1995 95/150S LP Gd cond/4-way3- Hyster H60FT 6000 2008 87/181T LP Ed cond/4-way/GM/CL/Mono/No AttachmentsHyster H60FT 6000 2008 91/190T LP Ex cond/4way/2.4L/CL/Lever/ForksHyster H60FT 6000 2007 84/181T LP Ex cond/S-S/2.4L/CL/LeverHyster H60FT 6000 2006 84/181T LP Ex cond/S-S/Forks/GM/Lever/MLHyster H60FT 6000 2006 84/181T LP Gd cond/F-P/F2/CL/Lever/ForksHyster H60FT 6000 2006 90/130F LP Gd cond/S-S/GM/SL/Lever/ForksHyster H60FT 6000 2006 85/181T LP Ex cond/GM/4-way/Lever/CLHyster H60FT 6000 2006 91/130F LP Ex cond/GM/Lever/Cab/F-P/48” ForksHyster H70FT 7000 2010 101/217T LP Ex cond/S-S/SL/GM/Mono2- Hyster H70FT 7000 2008 85/181T LP Gd cond/GM/Mon/ML/38” ForksHyster H70FT 7000 2008 93/193T D Ex cond/Yanmar/S-S/ForksHyster H70FT 7000 2008 85/181T D Ex cond/Yanmar/S-S/Forks2- Hyster H70FT 7000 2008 85/174T LP Ex cond/S-S/42” Forks/GMHyster H70FT 7000 2006 85/181T LP Ex cond/GM/S-S FP/48” ForksHyster H80FT 8000 2008 79/174T LP Ex cond/S-S/42” Forks/GMHyster H80FT 8000 2007 98/144F LP Ex cond/3Way/42” Forks/LBR/Solids/GM/CabHyster H80XM 8000 2005 85/122S LP Gd cond/S-S/Forks/GM/LeverHyster H100FT 10000 2010 111/157S D Ex cond/Duals/Forks/Good Rubber/CumminsHyster H100FT 10000 2007 96/183T D Ex cond/Cummins/Fork Clamp/47” ForksHyster H120XM 12000 2006 94/185T LP Ex cond/S-S/GM Vortec/WP ForksKomatsu FG15-14 3000 1986 77/118S LP Ex cond/2Way/Forks/NIKomatsu FG25C 5000 1990 78/116S GAS Gd cond/Nissan/Clutch/42” Forks/2nd Valve OnlyLinde H45D 9000 2006 92/184T D Ex cond/S-S/FP/Duals/Hydro/Cab/Volkswagon/48” Forks4- TCM FD30T-3 6000 2009 85/189T D Ex cond/S-S/42” Forks2- Toyota 8FGU15 3000 2007 84/187T LP Ex cond/3Way/4Y/ForksToyota 7FGU25 5000 2001 82/189T LP Gd cond/S-S/48” ForksToyota 42-6FGU25 5000 1997 82/189T LP Gd cond/Tilt Cylinder LeakToyota 7FGU30 6000 2000 84/130S GAS Gd cond/S-S/Toyota/48” Forks/Steer Axle IssueToyota 52-6FGU35 7000 1999 84/130S LP Gd cond/S-S/Toyota/42” Forks/Diff LeakToyota 02-3FG35 9000 1987 95/139S LP Gd cond/60” S-S/Toyota/48” Forks/LeaksToyota 05-5FG45 10000 1995 94/187T LP Gd cond/S-S/WP Drives5- Yale GLP030VX 3000 2007 84/189T LP Gd cond/S-S/FE/42” Forks/ML4- Yale GLP030AF 3000 2003 84/189T LP Ex cond/FE/S-S/48” ForksYale GLP040AF 4000 2005 84/189T LP Ex cond/FE/S-S/48” ForksYale GLP040AF 4000 2003 84/189T LP Ex cond/FE/S-S/48” ForksYale GLP050VX 5000 2010 84/189T LP Gd cond/MZ/S-S/42” Forks2- Yale GLP050VX 5000 2009 84/189T LP Ex cond/3rd Valve/36” Forks/ML2- Yale GLP050VX 5000 2008 84/189T LP Gd cond/F2/Rotator/42” Forks/Lever/CLYale GLP050VX 5000 2008 84/128S LP Ex cond/S-S/Forks//F22- Yale GLP050VX 5000 2007 86/194T LP Gd cond/S-S/Forks/DASHYale GP050TG 5000 2005 86/192T GAS Ex cond/3rd Valve/F2/42” Forks/”GS”/Cab2- Yale GP050TG 5000 2004 86/192T GAS Ex cond/3rd Valve/F2/42” Forks/”GS”/CabYale GLP050RG 5000 2003 86/131S LP Gd cond/S-S/Duals/FEYale GLP050RG 5000 2002 90/199T LP Ex cond/S-S/FE/ForksYale GDP060VX 6000 2010 87/186T D Ex cond/3Way/F-P/Yanmar 3.3L/Lever/CL/48” ForksYale GLP060VX 6000 2010 87/186T LP Ex cond/3Way/F-P/2.4L/Forks/CL3- Yale GLP060VX 5000 2009 89/126S LP Ex cond/3rd Valve/CL/Lever/F2/ForksYale GLP060VX 6000 2009 87/124F LP Ex cond/3rd Valve/CL/Lever/F2/ForksYale GLP060VX 6000 2006 87/187T LP Ex cond/3Way/F2/ForksYale GLP060VX 6000 2005 93/199T LP Ex cond/54” S-S/F2/WP Drives2- Yale GLP060TG 6000 2003 93/199T LP Gd cond/S-S/WP Drives/F2/Forks

IC BIG PNEUMATICSCat DP70 15500 1995 156/217S D Ex cond/S-S/96” Forks/Mast Off/Full Cab w/ DoorsCat DP80 17500 2004 149/197S D Ex cond/S-S/96” Forks/Mast OffHyster H155FT 15500 2009 108/133S D Ex cond/3Way Valve/ 72” Forks PIN/Cummins/SL2- Hyster H190HD 19000 2008 119/121S D Ex cond/FP/3-way/96” Forks/Cummins/LeverHyster H280HD 28000 2009 159/183S D Ex cond/S-S FP/44” Forks/Cummins/LeverHyster H360HD 36000 2008 162/183S D Ex cond/Lever/Cab A-C/Cummins/New Tires/S-S/96” ForksHyster H360HD 36000 2001 191/244S D Ex cond/3-way/Cab/Mon/Cummins 5.9LLinde H160D-1200@48 35000 2005 184/220S D Ex cond/4-way/S-S FP/25’ Boat ForksTaylor T330S 33000 2006 163/216S D Gd cond/S-S F-P/72” Forks/Perkins/Good Rubbert

WORLDWIDE WHOLESALER OFQUALITY LIFt TRUCKS

ROUGH TERRAIN MasterCraft C-06 6000 2005 119/168 D Ex cond/Cat Turbo/45 Fwd Tilt/S-S/48” Forks/4WD

TRUCK MOUNTED FORKLIFTS Moffett M5000 5000 1996 108/144S D Gd cond/Forks/S-S/Lister-Petter Diesel2- Moffett M5000 5000 1996 94/120S D tGd cond/Forks/S-S/Block Forks/L-P Diesel

IC TUGGER TToyota 7BT50 10000 2006 e Ex cond/24V Bat/13” BC/Tow Hitch/BDI/HM12- Toyota 7BT50 10000 2005 E Ex cond/24V Bat/13” BC/Tow Hitch/BDI/HMToyota TG10 10000 LP Gd cond/Manual Trans

VNA ARTICULATING/TURRET/4-WAY TRUCKS Aisle-master 44S 4400 2003 100/204T LP Ex cond/S-S/GM Vortec/42” Forks3- Landoll P40-SE90D 4000 2005 88/189T E Ex cond/48V Bat/48” Forks

WORK ASSIST VEHICLE Crown WAV50-84 5000 1999 E Gd cond/24V B&C Pack

Arial Lifts JLG 400S t500 2005 40’ LP/G Ex cond/36x96 Platform/Ford Dual Fuel/2WD

4 WHEEL SIT DOWN RIDER ELECTRICS Hyster E30Z 3000 2008 88/209T E Ex cond/S-S/36V/Forks/LeverHyster E30Z 3000 2008 82/189T E Ex cond/S-S/36V Bat/42” Forks/LeverHyster E40ZS 4000 2007 82/189T E Gd cond/S-S/36V/42” Forks/LBR/LeverHyster E40Z 4000 2006 88/138F E Gd cond/4-way/S-S/36V Bat/SL/Mono/48” ForksHyster E40XMS 4000 2002 83/189T E Ex cond/S-S/36V/42” Forks2- Hyster E45Z 4500 2006 82/189T E Gd cond/S-S/Forks/No Batt2- Hyster E45Z 4500 2005 82/189T E Gd cond/S-S/Forks/No BattHyster E50Z 5000 2008 82/189T E Ex cond/S-S/36V Bat/27” BC/Lever/Forks/PAINTED6- Hyster E50Z 5000 2007 82/189T E Ex cond/3Way/Mon/48V BatHyster E50Z 5000 2006 102/233T E Gd cond/4Way/S-S F-P/42” Forks/48VBat2- Hyster E50Z 5000 2005 82/189T E Gd cond/4-way/No Batt2- Hyster E65Z 6500 2009 82/182T E Ex cond/4Way/36V Bat/MonYale ERC040GH 4000 2006 84/189T E Gd cond/36V BatYale ERC050GH 5000 2008 82/189T E Ex cond/S-S/42” Forks/48V Bat2- Yale ERC050GH 5000 2008 84/192T E Gd cond/4Way/36V BatYale ERC050GH 5000 2006 103/242T E Gd cond/48V/33” BC/S-S/LBR/42” ForksYale ERC060GH 6000 2007 84/194T E Ex cond/S-S/36V bat/S-S/Mon/42” ForksYale ERC060GH 6000 2005 92/264Q E Gd cond/S-S/36V/33” BC/42” Forks/MonYale ERC065GH 6500 2006 84/187T E Ex cond/36V Bat/S-S/Forks/Lever BIG SIT DOWN RIDER ELECTRICS 2- Hyster E80Z 8000 2007 92/185T E Gd cond/4Way/48VHyster E80Z 8000 2005 84/122F E Ex cond/48V/EE/S-S/Lever/39”BCHyster E120Z 12000 2007 92/185T E Gd cond/4Way/48V

3 WHEEL SIT DOWN RIDER ELECTRICS Crown SC4020-30 3000 2001 83/190T E Gd cond/S-S/42” Forks/36V/No BattYale ERP035TH 3500 2006 82/189T E Ex cond/S-S/36V Bat/42” ForksYale ERP040TG 4000 2004 90/206T E Ex cond/S-S/36V Bat/42” Forks

RIDER REACH 3- Hyster N35ZR 3500 2007 131/302T E Ex cond/S-S/36V Bat/42” Forks/Laid Down3- Hyster N35ZR 3500 2007 119/272T E Ex cond/S-S/Forks/36V Bat/34”ID 45” ODHyster N45ZR 4500 2006 131/302T E Ex cond/S-S/42” Forks/36V BatHyster N45ZR 4500 2006 125/287T E Ex cond/S-S/42” Forks/36V BatHyster N45XMR2 4500 1999 107/251T E Gd cond/S-S/42” Forks/36V BatLinde-Baker BRT35 3500 105/215T E Gd cond/S-S/42” Forks/24V BatRaymond R40TT 4000 2001 87/186T E Gd cond/S-S/42” Forks/36V Bat2- Yale NDR030CB Double-Reach 3000 2006138/320T E Gd cond/S-S/42” Forks/36V Bat/Large BC2- Yale NR035AE 3500 2005 107/240T E Ex cond/S-S/24V Bat/42” Forks2- Yale NR035AE 3500 2004 107/240T E Ex cond/S-S/24V Bat/42” ForksYale NR035AE 3500 2003 95/212T E Ex cond/S-S/36V/42” Forks/Damaged2- Yale NR035AE 3500 2001 107/240T E Ex cond/S-S/24V Bat/42” Forks5- Yale NR040AE 4000 2004 91/203T E Ex cond/S-S/24V Bat/12” BC/ID 34” OD 42”/42” Forks7- Yale NR040AE 4000 2003 91/203T E Ex cond/S-S/24V Bat/12” BC/ID 34” OD 42”/42” Forks3- Yale NR040AE 4000 2002 91/203T E Ex cond/S-S/24V Bat/12” BC/ID 34” OD 42”/42” Forks2- Yale NR040AE 4000 2001 91/203T E Ex cond/S-S/24V Bat/12” BC/ID 34” OD 42”/42” ForksYale NR040AD 4000 2000 95/213T E Ex cond/24V Bat/S-S/Forks2- Yale NR045AE 4500 2006 95/212T E Ex cond/36V Bat/S-S/42” Forks/ID 34” OD 45”/16” BCYale NR045CB 4500 2005 146/341T E Ex cond/S-S/36V Bat/19” BC/ID 35” OD 46”/42” Forks

STOCKPICKERS 4- Hyster R30XMS 3000 2007 131/300T E Ex cond/48” Forks/36V BatteryHyster R30XMS 3000 2004 95/213T E Gd cond/24V/42” ForksYale OS030ECN 3000 2005 105/240T E Ex cond/24V Bat/42” Forks6- Yale OS030EC 3000 2003 89/195T E Ex cond/24V Bat/42” Forks11- Yale OS030EC 3000 2002 89/195T E Ex cond/24V Bat/42” Forks

NARROW AISLE Crown 30WRTT Walkie Reach 3000 200171/152T E Ex cond/24V Bat/13” BC/42” Forks2- Crown RC3020-30 3000 2005 83/188T E Gd cond/S-S/36V Bat/42” ForksCrown RC3020-30 3000 2005 83/188T E Gd cond/S-S/36V Bat/42” Forks/PaintedHyster E40HSD Rider Cwt-Bal 4000 200483/127S E Gd cond/S-S/42” Forks/LBR/36V Bat/21” BCYale MSW040LA Walkie Straddle 4000 199372/100S E Ex cond/24V/8” BC/ID 49” OD 57”/39” Forks ELECTRIC PALLET JACKS Raymond 111TM-F60L Walkie/Rider 6000 200327” x 85” E Ex cond/24V Bat/8” BC/24V ChargerRaymond 112TM-FRE60L Walkie/Rider 6000 200127” x 48” E Ex cond/24V Bat/8” BC/24V Charger6- Yale MPB040AE 4000 2010 27” x 48” E Ex cond/24V Bat/8” BC36- Yale MPB040AE 4000 2008 27” x 48” E Ex cond/24V B&C Pack/7” BC

4- Yale MPB040AE 4000 2007 27” x 48” E Ex cond/24V B&C Pack/7” BC2- Yale MPB040AE 4000 2006 27” x 48” E Ex cond/24V B&C Pack/7” BC2- Yale MPB040AE 4000 2005 27” x 48” E Ex cond/24V B&C Pack/7” BCYale MPB040AE 4000 2004 27” x 48” E E x cond/24V B&C Pack/7” BCYale MPE060LE 6000 2006 27” x 48” E Ex cond/24V Bat/13” BC6- Yale MPE060LE 6000 2003 27” x 48” E Ex cond/24V Bat/13” BC14- Yale MPE060LE 6000 2002 27” x 48” E Ex cond/24V Bat/13” BC NEW SINGLE PHASE BATTERY CHARGERS New Eagle Smart S36-240/1/100 36 volt battery charger with auto “start stop” controls - Amp hour capacity 610 - 970 - Line voltage 220/240 single phase - Charging time 610 A/H 8 hours - 850 A/H 10 hours - 970- A/H 12 hours New Eagle Smart S48-240/1/100 48 volt battery charger with auto “start stop” controls - Amp hour capacity 610 - 970 - Line voltage 220/240 single phase - Charging time 610 A/H 8 hours - 850 A/H 10 hours - 970- A/H 12 hours

ATTACHMENTS NEW Telescopic Adjustable Jib Boom 1- NEW Telescoping Boom Attachment with Lift Hook - 132” Max Extension - 62” Min Extension - 1,650 lbs Capacity @ 132” - 2860 lbs Capacity @ 62” - Weight 400 lbs - Fits Forks up to 2.75” thick and 7” wide Carpet Rams New Carpet Poles - 2.5” Diameter x 120” long - Class II - Weight 285 - Capacity 1500 @ 48” LC New Carpet Poles - 2.5” Diameter x 108” long - Class III - Weight 295 - Capacity 1500 @ 48” LC New Carpet Poles - 3” Diameter x 120” long - Class III - Weight 360 - Capacity 2200 @ 48” LC Carriages 78” Wide Class IV Carriage for Hyster H155XL/Yale GDP155 - Triple Mast ONLY fork clamps Cascade 35D-CF-08A Non Side-Shifting Fork Clamp - Class II - 1.5 x 5 x 42” Forks - 3,500 lbs. @ 24” Capacity - 17” to 61” Range - Good Blocks - Good Cond - On Pallet Load Pushers Cascade 35E-PLB-180 Push-Pull - Class II - 1.5 x 4 x 48” Class II Forks - 3,200 lbs. @ 24” Capacity - Good Blocks - Good Cond - On Pallet 2- Cascade 45E-PLS-411 Class II Load Pusher - Ready for Class II Forks - 950 lbs. - On PALLET Cascade 35E-PLS-234 Side-Shifting Load Push - Class II - 1.75 x 5 x 48” Class II Forks - 859 lbs. 3,500 lbs. Capacity - Good Blocks - Good Cond. - On PALLET Paper Roll Clamps MANY AVAILABLE---MANY SIZES---CALL FOR DETAILS Cascade 77F-RCS-196 360⁰ Rotating Swing Frame Paper Roll Clamp - Class IV - 10” to 60” Roll Range - Weight 2,850 lbs - Capacity 7,700 lbs @ 60” Roll - Good Blocks - Good Cond - On PALLET Cascade 90F-RCS-173 - 360 Rotating Swing Frame Paper Roll Clamp - Class IV - 10-60” Roll Range - 9,000 lbs @ 30” Capacity - 2,850 lbs. - Good Blocks - Good Condition Cascade 90F-RCP-283 360⁰ Rotating Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 3,000 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond. Cascade 90F-RCP-01CR2 360⁰ Rotating Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 2,850 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond. Cascade 90F-RCP-01CR2 360⁰ Rotating Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 2,850 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond. Cascade R90F-RCP-01C 360⁰ Rotating Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 2,850 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond Cascade 90F-RCP-01C 360⁰ Rotating Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 2,850 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond - On PALLET Cascade R90F-RCP-01C 360⁰ Rotating Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 2,850 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond Cascade R90F-RCP-609C2 360⁰ Rotating Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 2,850 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond - On PALLET Cascade 90F-RCS-173 360⁰ Rotating Swing Frame Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 2,850 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond. Cascade 90F-RCS-166 360⁰ Rotating Swing Frame Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 2,850 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond. Cascade 90F-RCS-21CR1 360⁰ Rotating Swing Frame Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 3,050 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond - On Pallet Cascade 100F-RCS-21CR1 360⁰ Rotating Swing Frame Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 3,500 lbs - Capacity 10,000 lbs @ 60” Roll - Good Blocks - Good Cond - On Pallet Cascade R100E-RCP-01C 360⁰ Rotating Swing Frame Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 3,010 lbs - Capacity 10,000 lbs @ 60” Roll - Good Blocks - Good Cond - On PALLET Push Pulls 7- Loran 11097 Push-Pull - Class II - 11” x 42” Platens - Weight 1,175 lbs - 3,500 Lbs Capacity - On PALLET Cascade 35E-PPS-A001R4 Side-Shifting Push-Pull- Class II - 18 x 48” Platens - 1105 lbs. 3,500 lbs. Capacity - Good Blocks - Good Cond. - On PALLET Cascade 35E-PPS-A003 Side-Shifting Push-Pull - Class II - 15 x 48” Platens - 3,500 lbs Cap. - 1,055 lbs. - Good Blocks - Good Cond. Cascade 45E-PXB-199 Extended Range Push-Pull - Class II - 26 x 47” Platens - 3,600 lbs. @ 36” Capacity - Good Blocks - Good Condition. Cascade 45E-PXB-199 Extended Range Push-Pull - Class II - 26 x 47” Platens - 3,600 lbs. @ 36” Capacity - Good Blocks - Good Condition.


IC CUSHIONS A/C ACC30LPS 3000 1978 80/185T LP Gd cond/AC/3Way/ForksCat GC18K 3500 1999 83/188T LP Gd cond/S-S/Forks/MitsiCat T40D 4000 1986 83/129S LP Gd cond/Cat/ForksClark C500-25 2500 1978 71/153T LP Gd cond/3-wayDaewoo GC30S-2 6000 1997 110/168S LP Gd cond/S-S/Forks/NIHyster S30FT 3000 2007 82/189T LP Ex cond/S-S/FE/42” Forks/CL/MonHyster S30FT 3000 2006 LP Gd cond/MZ/Lever/SL/No MastHyster S35FT 3500 2009 82/187T LP Ex cond/S-S/42” Forks/MZHyster S50FT 5000 2009 84/240Q LP Ex cond/S-S/42”Forks2- Hyster S50FT 5000 2009 82/189T LP Gd cond/S-S/Forks/MZ/LeverHyster S50FT 5000 2009 85/130F LP Ex cond/S-S/F2/SLHyster S50FT 5000 2008 83/126F LP Gd cond/S-S/Forks/MZ/LeverHyster S50FT 5000 2008 83/240Q LP Gd cond/3Way/Attach/F2/LeverHyster S50FT 5000 2008 82/189T LP Ex cond/3-way/MZ/ML/Mon/LPS2- Hyster S50FT 5000 2007 82/189T LP Ex cond/S-S/42” Forks/MZ/ML/LeverHyster S50FT 5000 2007 82/189T LP Gd cond/4Way/S-S F-P/Forks/Lever/CL/GM/Paint2- Hyster S50FT 5000 2007 83/129F LP Gd cond/Bad Engine/GM/3-way/ML/MonHyster S50FT 5000 2006 77/171T LP Gd cond/S-S/ForksHyster S50FT 5000 2006 83/130F LP Ex cond/4-way/MZ/ML/MonHyster S50FT 5000 2005 85/181T LP Gd cond/4Way/S-S/Forks/F2/SLHyster S60FT 6000 2006 88/187T LP Gd cond/4-way/F2/ML/Mono/No Forks2- Hyster S70FT 7000 2009 84/181T LP Ex cond/4-way/No AttachmentsHyster S70FT 7000 2008 84/181T LP Ex cond/S-S/42” Forks/GM/Lever/Small Chassis/SLHyster S70FT 7000 2007 88/187T LP Ex cond/S-S F-P/LBR/42” Forks/N-M Tires/ML/LeverTCM FGC15T8T 3000 1993 100/216T LP Gd cond/S-S/42” Forks/Lever/NissanToyota 7FGCU30 6000 2005 86/187T LP Gd cond/S-S/48” Forks/Toyota2- Toyota 8FGCU25 5000 2007 83/188T LP Ex cond/DEMO/S-S/42” ForksToyota 42-6FGCU25 5000 1999 110/168S LP Gd cond/S-S/Forks/ToyotaYale GLC030VX 3000 2007 LP Gd cond/FE/S-S/ML/No MastYale GLC030VX 3000 2006 82/126S LP Ex cond/S-S/FE/42” Forks/MLYale GLC040VX 4000 2007 82/189T LP Gd cond/S-S/Forks/F2/Lever/CLYale GLC040AF 4000 2003 82/189T LP Gd cond/S-S/Forks/F2/Lever/CLYale GLC050VX 5000 2005 100/288Q LP Ex cond/S-S/F2/42” Forks/ML2- Yale GLC050VX 5000 2005 83/240Q LP Ex cond/S-S/F2/42” Forks/ML2- Yale GLC050VX 5000 2004 82/189T LP Ex cond/S-S/F2/ML/Lever/42” ForksYale GLC050RG 5000 2001 82/189T LP Gd cond/S-S/F2/CL/Lever/Forks2- Yale GLC060VX 6000 2008 85/182T LP Gd cond/S-S/F2/Forks/Lever/CL3- Yale GLC060VX 6000 2007 92/200T LP Ex cond/S-S/Forks/F2/Lever/CL5- Yale GLC060VX 6000 2005 85/122F LP Ex cond/S-S/F2/CL2- Yale GLC070VX 7000 2008 86/124S LP Ex cond/F2/ML/3-way3- Yale GLC070VX 7000 2007 85/181T LP Ex cond/3rd Valve/Forks/GM/Lever/SL4- Yale GLC070VX 7000 2006 85/181T LP Ex cond/3rd Valve/ML/GM/Forks2- Yale GLC070VX 7000 2006 87/129S LP Ex cond/3-way/F-P/GM/Lever/CL/54” Forks

IC BIG CUSHIONS 10/15/13 10000 2007 99/206T LP Ex cond/S-S/GM/48” WP Forks/BCS2- Cat GC55KS-1 12000 2005 88/172T LP Ex cond/4Way/Mitsi/48” Forks/MonCat GC70K 15500 2000 86/148T LP Ex cond/3-way/Mitsu/72” ForksHyster S80FT 8000 2008 85/173T LP Ex cond/4-way/ML/Mon/LPS/Bent OHGHyster S80FT 8000 2007 85/173T LP Ex cond/4-way/ML/Mon/LPSHyster S100XM 1 0000 2005 99/136F LP Ex cond/GM/3Way/100D Rotator/48” Forks/LeverHyster S100XMBCS 10000 2005 99/136S LP Gd cond/S-S/48” Forks/GM6- Hyster S120FT 12000 2008 85/163T LP Ex cond/4-way/GM/Lever/CL/No AttachmentsHyster S120FT 12000 2008 92/185T LP Ex cond/4-wayMon/GM Vortec/S-SHyster S120FTS 12000 2008 108/220T LP Ex cond/4-way/GM Vortec/90F PRC 10-60Hyster S120FTS 12000 2008 83/110S LP Ex cond/3-way/NO S-S/SL/48” Forks/MonHyster S120FT PRS 12000 2007 100/208T LP Ex cond/4-way/Mono/ML/GM Vortec/90F-RCS2- Hyster S120FT PRS 12000 2007 83/163T LP Gd cond/5Way/Cas 90F PRC/ML/GM/MonHyster S120FT PRS 12000 2006 100/208T LP Ex cond/4-way/GM/Mon/MLHyster S120XM 12000 2005 82/112S D Gd cond/4Way/Perkins/MonHyster S135XL2 13500 2006 85/144T LP Ex cond/GM Vortec/Mon/S-SHyster S155FT 15500 2008 88/149T LP EGd cond/4Way/GM/Lever/CLHyster S155FT 15500 2007 87/94S LP x cond/3rd Valve/CL/Mon/53” Forks BENT OHGHyster S155XL2 15500 2006 105/199T L Ex cond/Lever/4-way/S-SHyster S155XL2 15500 2005 106/134S LP Ex cond/Cab/3-way/48” ForksTaylor THC300S 30000 2003 135/144S LP Ex cond/GM 5.7L/4-way/S-S FP/72” Forks2- Taylor THC300S 30000 2003 126/121S LP Ex cond/GM 5.7L/4-way/S-S FP/72” Forks/PAINTEDToyota 42-6FGCU15 3000 1998 82/189T LP Gd cond/S-S/Engine Issue2- Toyota 7FGCU35 BCS 8000 2009 87/124S LP Ex cond/S-S/ForksToyota 7FGCU35-BCS 8000 2007 88/132F LP Ex cond/3rd Lever/GM/42” Forks/BCS/Bad tiresToyota 7FGCU45 10000 2003 93/187T LP Gd cond/3-way/42” Forks/ToyotaYale GLC080VX 8000 2008 100/206T LP Ex cond/Wide S-S/42” Forks/GM/Lever2- Yale GLC100VX 10000 2007 98/202T LP Ex cond/GM/S-S/48” Forks/Lever/CLYale GLC100SVX 10000 2006 100/208T LP Ex cond/GM/S-S/Forks/BCSYale GLC120VX 12000 2010 86/114S LP Ex cond/4-way/GM Vortec/ML/Mono/Cas 90F PRC/10” to 60” RR2- Yale GLC120VX 12000 2009 84/111F LP Ex cond/4-way/ML/GM Vortec/CabYale GLC120VX 12000 2008 106/220T LP Ex cond/4-way/S-S F-P/GM Vortec/SL/Mon/Forks

IC PNEUMATICS Cat P5000 5000 2009 84/188T LP Ex cond/S-S/42” Forks/Mitsi/Bad Head GasketCat P6000 6000 2006 87/186T LP Ex cond/S-S/Forks/MitsiCat GP35K 8000 2003 94/189T LP Gd cond/3Way/Mitsu/42” ForksCat DP40K 8000 2005 100/131S D Gd cond/Duals/Mitsi/Wide S-SClark CMP50SD 10000 2006 85/177T D Ex cond/Duals/Wide S-S/72” Forks

Hyster H40FT 4000 2009 83/129F LP Ex cond/3-way Valve/Cab/SL/Mon7- Hyster H40FT 4000 2008 83/189T LP Ex cond/4Way/Mon/ML3- Hyster H50FT 5000 2009 84/189T LP Ex cond/Single Double/F2/LeverHyster H50FT 5000 2008 84/189T LP Ex cond/S-S/Forks/MZ/Lever/MLHyster H50FT 5000 2007 86/130F LP Exc cond/3Way/MZ/Forks2- Hyster H50FT 5000 2005 84/189T LP Ex cond/S-S/Forks/Mon/GM/SL2- Hyster H50FT 5000 2005 84/189T D Ex cond/S-S/Block Forks/Yanmar/Mon/14020 has Duals3- Hyster H50XM 5000 2004 95/150S D Gd cond/S-S/Block Forks/Duals/Perkins/MonHyster H50XM 5000 2003 82/189T LP Gd cond/3-way/No Attachments/CL/Lever/MS Small Parts2- Hyster H50XM 5000 2002 95/150S D Gd cond/S-S/Block Forks/Perkins/MonHyster H50XM 5000 2001 95/150S D Gd cond/S-S/Block Forks/Duals/Perkins/MonHyster H50XM 5000 1995 95/150S LP Gd cond/4-way3- Hyster H60FT 6000 2008 87/181T LP Ed cond/4-way/GM/CL/Mono/No AttachmentsHyster H60FT 6000 2008 91/190T LP Ex cond/4way/2.4L/CL/Lever/ForksHyster H60FT 6000 2007 84/181T LP Ex cond/S-S/2.4L/CL/LeverHyster H60FT 6000 2006 84/181T LP Ex cond/S-S/Forks/GM/Lever/MLHyster H60FT 6000 2006 84/181T LP Gd cond/F-P/F2/CL/Lever/ForksHyster H60FT 6000 2006 90/130F LP Gd cond/S-S/GM/SL/Lever/ForksHyster H60FT 6000 2006 85/181T LP Ex cond/GM/4-way/Lever/CLHyster H60FT 6000 2006 91/130F LP Ex cond/GM/Lever/Cab/F-P/48” ForksHyster H70FT 7000 2010 101/217T LP Ex cond/S-S/SL/GM/Mono2- Hyster H70FT 7000 2008 85/181T LP Gd cond/GM/Mon/ML/38” ForksHyster H70FT 7000 2008 93/193T D Ex cond/Yanmar/S-S/ForksHyster H70FT 7000 2008 85/181T D Ex cond/Yanmar/S-S/Forks2- Hyster H70FT 7000 2008 85/174T LP Ex cond/S-S/42” Forks/GMHyster H70FT 7000 2006 85/181T LP Ex cond/GM/S-S FP/48” ForksHyster H80FT 8000 2008 79/174T LP Ex cond/S-S/42” Forks/GMHyster H80FT 8000 2007 98/144F LP Ex cond/3Way/42” Forks/LBR/Solids/GM/CabHyster H80XM 8000 2005 85/122S LP Gd cond/S-S/Forks/GM/LeverHyster H100FT 10000 2010 111/157S D Ex cond/Duals/Forks/Good Rubber/CumminsHyster H100FT 10000 2007 96/183T D Ex cond/Cummins/Fork Clamp/47” ForksHyster H120XM 12000 2006 94/185T LP Ex cond/S-S/GM Vortec/WP ForksKomatsu FG15-14 3000 1986 77/118S LP Ex cond/2Way/Forks/NIKomatsu FG25C 5000 1990 78/116S GAS Gd cond/Nissan/Clutch/42” Forks/2nd Valve OnlyLinde H45D 9000 2006 92/184T D Ex cond/S-S/FP/Duals/Hydro/Cab/Volkswagon/48” Forks4- TCM FD30T-3 6000 2009 85/189T D Ex cond/S-S/42” Forks2- Toyota 8FGU15 3000 2007 84/187T LP Ex cond/3Way/4Y/ForksToyota 7FGU25 5000 2001 82/189T LP Gd cond/S-S/48” ForksToyota 42-6FGU25 5000 1997 82/189T LP Gd cond/Tilt Cylinder LeakToyota 7FGU30 6000 2000 84/130S GAS Gd cond/S-S/Toyota/48” Forks/Steer Axle IssueToyota 52-6FGU35 7000 1999 84/130S LP Gd cond/S-S/Toyota/42” Forks/Diff LeakToyota 02-3FG35 9000 1987 95/139S LP Gd cond/60” S-S/Toyota/48” Forks/LeaksToyota 05-5FG45 10000 1995 94/187T LP Gd cond/S-S/WP Drives5- Yale GLP030VX 3000 2007 84/189T LP Gd cond/S-S/FE/42” Forks/ML4- Yale GLP030AF 3000 2003 84/189T LP Ex cond/FE/S-S/48” ForksYale GLP040AF 4000 2005 84/189T LP Ex cond/FE/S-S/48” ForksYale GLP040AF 4000 2003 84/189T LP Ex cond/FE/S-S/48” ForksYale GLP050VX 5000 2010 84/189T LP Gd cond/MZ/S-S/42” Forks2- Yale GLP050VX 5000 2009 84/189T LP Ex cond/3rd Valve/36” Forks/ML2- Yale GLP050VX 5000 2008 84/189T LP Gd cond/F2/Rotator/42” Forks/Lever/CLYale GLP050VX 5000 2008 84/128S LP Ex cond/S-S/Forks//F22- Yale GLP050VX 5000 2007 86/194T LP Gd cond/S-S/Forks/DASHYale GP050TG 5000 2005 86/192T GAS Ex cond/3rd Valve/F2/42” Forks/”GS”/Cab2- Yale GP050TG 5000 2004 86/192T GAS Ex cond/3rd Valve/F2/42” Forks/”GS”/CabYale GLP050RG 5000 2003 86/131S LP Gd cond/S-S/Duals/FEYale GLP050RG 5000 2002 90/199T LP Ex cond/S-S/FE/ForksYale GDP060VX 6000 2010 87/186T D Ex cond/3Way/F-P/Yanmar 3.3L/Lever/CL/48” ForksYale GLP060VX 6000 2010 87/186T LP Ex cond/3Way/F-P/2.4L/Forks/CL3- Yale GLP060VX 5000 2009 89/126S LP Ex cond/3rd Valve/CL/Lever/F2/ForksYale GLP060VX 6000 2009 87/124F LP Ex cond/3rd Valve/CL/Lever/F2/ForksYale GLP060VX 6000 2006 87/187T LP Ex cond/3Way/F2/ForksYale GLP060VX 6000 2005 93/199T LP Ex cond/54” S-S/F2/WP Drives2- Yale GLP060TG 6000 2003 93/199T LP Gd cond/S-S/WP Drives/F2/Forks

IC BIG PNEUMATICSCat DP70 15500 1995 156/217S D Ex cond/S-S/96” Forks/Mast Off/Full Cab w/ DoorsCat DP80 17500 2004 149/197S D Ex cond/S-S/96” Forks/Mast OffHyster H155FT 15500 2009 108/133S D Ex cond/3Way Valve/ 72” Forks PIN/Cummins/SL2- Hyster H190HD 19000 2008 119/121S D Ex cond/FP/3-way/96” Forks/Cummins/LeverHyster H280HD 28000 2009 159/183S D Ex cond/S-S FP/44” Forks/Cummins/LeverHyster H360HD 36000 2008 162/183S D Ex cond/Lever/Cab A-C/Cummins/New Tires/S-S/96” ForksHyster H360HD 36000 2001 191/244S D Ex cond/3-way/Cab/Mon/Cummins 5.9LLinde H160D-1200@48 35000 2005 184/220S D Ex cond/4-way/S-S FP/25’ Boat ForksTaylor T330S 33000 2006 163/216S D Gd cond/S-S F-P/72” Forks/Perkins/Good Rubbert

35,000 lbs @ 48” LC retail ready

D I E S E L

2 0 0 6 h ys t e r s 1 5 5 x l 2 2 0 0 8 ya l e g l p 0 3 0 v x

2 0 0 6 C AT D p 7 0 TAY L O R T H C 3 0 0 S

H YS T E R H 5 0 F T

2008 yale mpb040ae 2 0 0 4 C AT D P 8 0

H YS T E R H 4 0 F T S H Y S T E R H 3 6 0 H D

2 0 0 6 C AT G C 7 0 K

H YS T E R S 3 0 F T2 0 0 6 Ya l e G L C 1 5 5 C a 2 0 0 6 L i n d e H 4 5 0

H YS T E R H 9 0 F T

Ya l e M S W 0 4 0 L A t oyo ta 8 f g u 1 5

YA L E G L C 0 5 0 V X

2005 linde h160d-1200

CALL THE PROS: 704.716.3636AND TALK TO ONE OF OUR

TEAM MEMBERS DIRECTLY!

ROUGH TERRAIN MasterCraft C-06 6000 2005 119/168 D Ex cond/Cat Turbo/45 Fwd Tilt/S-S/48” Forks/4WD

TRUCK MOUNTED FORKLIFTS Moffett M5000 5000 1996 108/144S D Gd cond/Forks/S-S/Lister-Petter Diesel2- Moffett M5000 5000 1996 94/120S D tGd cond/Forks/S-S/Block Forks/L-P Diesel

IC TUGGER TToyota 7BT50 10000 2006 e Ex cond/24V Bat/13” BC/Tow Hitch/BDI/HM12- Toyota 7BT50 10000 2005 E Ex cond/24V Bat/13” BC/Tow Hitch/BDI/HMToyota TG10 10000 LP Gd cond/Manual Trans

VNA ARTICULATING/TURRET/4-WAY TRUCKS Aisle-master 44S 4400 2003 100/204T LP Ex cond/S-S/GM Vortec/42” Forks3- Landoll P40-SE90D 4000 2005 88/189T E Ex cond/48V Bat/48” Forks

WORK ASSIST VEHICLE Crown WAV50-84 5000 1999 E Gd cond/24V B&C Pack

Arial Lifts JLG 400S t500 2005 40’ LP/G Ex cond/36x96 Platform/Ford Dual Fuel/2WD

4 WHEEL SIT DOWN RIDER ELECTRICS Hyster E30Z 3000 2008 88/209T E Ex cond/S-S/36V/Forks/LeverHyster E30Z 3000 2008 82/189T E Ex cond/S-S/36V Bat/42” Forks/LeverHyster E40ZS 4000 2007 82/189T E Gd cond/S-S/36V/42” Forks/LBR/LeverHyster E40Z 4000 2006 88/138F E Gd cond/4-way/S-S/36V Bat/SL/Mono/48” ForksHyster E40XMS 4000 2002 83/189T E Ex cond/S-S/36V/42” Forks2- Hyster E45Z 4500 2006 82/189T E Gd cond/S-S/Forks/No Batt2- Hyster E45Z 4500 2005 82/189T E Gd cond/S-S/Forks/No BattHyster E50Z 5000 2008 82/189T E Ex cond/S-S/36V Bat/27” BC/Lever/Forks/PAINTED6- Hyster E50Z 5000 2007 82/189T E Ex cond/3Way/Mon/48V BatHyster E50Z 5000 2006 102/233T E Gd cond/4Way/S-S F-P/42” Forks/48VBat2- Hyster E50Z 5000 2005 82/189T E Gd cond/4-way/No Batt2- Hyster E65Z 6500 2009 82/182T E Ex cond/4Way/36V Bat/MonYale ERC040GH 4000 2006 84/189T E Gd cond/36V BatYale ERC050GH 5000 2008 82/189T E Ex cond/S-S/42” Forks/48V Bat2- Yale ERC050GH 5000 2008 84/192T E Gd cond/4Way/36V BatYale ERC050GH 5000 2006 103/242T E Gd cond/48V/33” BC/S-S/LBR/42” ForksYale ERC060GH 6000 2007 84/194T E Ex cond/S-S/36V bat/S-S/Mon/42” ForksYale ERC060GH 6000 2005 92/264Q E Gd cond/S-S/36V/33” BC/42” Forks/MonYale ERC065GH 6500 2006 84/187T E Ex cond/36V Bat/S-S/Forks/Lever BIG SIT DOWN RIDER ELECTRICS 2- Hyster E80Z 8000 2007 92/185T E Gd cond/4Way/48VHyster E80Z 8000 2005 84/122F E Ex cond/48V/EE/S-S/Lever/39”BCHyster E120Z 12000 2007 92/185T E Gd cond/4Way/48V

3 WHEEL SIT DOWN RIDER ELECTRICS Crown SC4020-30 3000 2001 83/190T E Gd cond/S-S/42” Forks/36V/No BattYale ERP035TH 3500 2006 82/189T E Ex cond/S-S/36V Bat/42” ForksYale ERP040TG 4000 2004 90/206T E Ex cond/S-S/36V Bat/42” Forks

RIDER REACH 3- Hyster N35ZR 3500 2007 131/302T E Ex cond/S-S/36V Bat/42” Forks/Laid Down3- Hyster N35ZR 3500 2007 119/272T E Ex cond/S-S/Forks/36V Bat/34”ID 45” ODHyster N45ZR 4500 2006 131/302T E Ex cond/S-S/42” Forks/36V BatHyster N45ZR 4500 2006 125/287T E Ex cond/S-S/42” Forks/36V BatHyster N45XMR2 4500 1999 107/251T E Gd cond/S-S/42” Forks/36V BatLinde-Baker BRT35 3500 105/215T E Gd cond/S-S/42” Forks/24V BatRaymond R40TT 4000 2001 87/186T E Gd cond/S-S/42” Forks/36V Bat2- Yale NDR030CB Double-Reach 3000 2006138/320T E Gd cond/S-S/42” Forks/36V Bat/Large BC2- Yale NR035AE 3500 2005 107/240T E Ex cond/S-S/24V Bat/42” Forks2- Yale NR035AE 3500 2004 107/240T E Ex cond/S-S/24V Bat/42” ForksYale NR035AE 3500 2003 95/212T E Ex cond/S-S/36V/42” Forks/Damaged2- Yale NR035AE 3500 2001 107/240T E Ex cond/S-S/24V Bat/42” Forks5- Yale NR040AE 4000 2004 91/203T E Ex cond/S-S/24V Bat/12” BC/ID 34” OD 42”/42” Forks7- Yale NR040AE 4000 2003 91/203T E Ex cond/S-S/24V Bat/12” BC/ID 34” OD 42”/42” Forks3- Yale NR040AE 4000 2002 91/203T E Ex cond/S-S/24V Bat/12” BC/ID 34” OD 42”/42” Forks2- Yale NR040AE 4000 2001 91/203T E Ex cond/S-S/24V Bat/12” BC/ID 34” OD 42”/42” ForksYale NR040AD 4000 2000 95/213T E Ex cond/24V Bat/S-S/Forks2- Yale NR045AE 4500 2006 95/212T E Ex cond/36V Bat/S-S/42” Forks/ID 34” OD 45”/16” BCYale NR045CB 4500 2005 146/341T E Ex cond/S-S/36V Bat/19” BC/ID 35” OD 46”/42” Forks

STOCKPICKERS 4- Hyster R30XMS 3000 2007 131/300T E Ex cond/48” Forks/36V BatteryHyster R30XMS 3000 2004 95/213T E Gd cond/24V/42” ForksYale OS030ECN 3000 2005 105/240T E Ex cond/24V Bat/42” Forks6- Yale OS030EC 3000 2003 89/195T E Ex cond/24V Bat/42” Forks11- Yale OS030EC 3000 2002 89/195T E Ex cond/24V Bat/42” Forks

NARROW AISLE Crown 30WRTT Walkie Reach 3000 200171/152T E Ex cond/24V Bat/13” BC/42” Forks2- Crown RC3020-30 3000 2005 83/188T E Gd cond/S-S/36V Bat/42” ForksCrown RC3020-30 3000 2005 83/188T E Gd cond/S-S/36V Bat/42” Forks/PaintedHyster E40HSD Rider Cwt-Bal 4000 200483/127S E Gd cond/S-S/42” Forks/LBR/36V Bat/21” BCYale MSW040LA Walkie Straddle 4000 199372/100S E Ex cond/24V/8” BC/ID 49” OD 57”/39” Forks ELECTRIC PALLET JACKS Raymond 111TM-F60L Walkie/Rider 6000 200327” x 85” E Ex cond/24V Bat/8” BC/24V ChargerRaymond 112TM-FRE60L Walkie/Rider 6000 200127” x 48” E Ex cond/24V Bat/8” BC/24V Charger6- Yale MPB040AE 4000 2010 27” x 48” E Ex cond/24V Bat/8” BC36- Yale MPB040AE 4000 2008 27” x 48” E Ex cond/24V B&C Pack/7” BC

4- Yale MPB040AE 4000 2007 27” x 48” E Ex cond/24V B&C Pack/7” BC2- Yale MPB040AE 4000 2006 27” x 48” E Ex cond/24V B&C Pack/7” BC2- Yale MPB040AE 4000 2005 27” x 48” E Ex cond/24V B&C Pack/7” BCYale MPB040AE 4000 2004 27” x 48” E E x cond/24V B&C Pack/7” BCYale MPE060LE 6000 2006 27” x 48” E Ex cond/24V Bat/13” BC6- Yale MPE060LE 6000 2003 27” x 48” E Ex cond/24V Bat/13” BC14- Yale MPE060LE 6000 2002 27” x 48” E Ex cond/24V Bat/13” BC NEW SINGLE PHASE BATTERY CHARGERS New Eagle Smart S36-240/1/100 36 volt battery charger with auto “start stop” controls - Amp hour capacity 610 - 970 - Line voltage 220/240 single phase - Charging time 610 A/H 8 hours - 850 A/H 10 hours - 970- A/H 12 hours New Eagle Smart S48-240/1/100 48 volt battery charger with auto “start stop” controls - Amp hour capacity 610 - 970 - Line voltage 220/240 single phase - Charging time 610 A/H 8 hours - 850 A/H 10 hours - 970- A/H 12 hours

ATTACHMENTS NEW Telescopic Adjustable Jib Boom 1- NEW Telescoping Boom Attachment with Lift Hook - 132” Max Extension - 62” Min Extension - 1,650 lbs Capacity @ 132” - 2860 lbs Capacity @ 62” - Weight 400 lbs - Fits Forks up to 2.75” thick and 7” wide Carpet Rams New Carpet Poles - 2.5” Diameter x 120” long - Class II - Weight 285 - Capacity 1500 @ 48” LC New Carpet Poles - 2.5” Diameter x 108” long - Class III - Weight 295 - Capacity 1500 @ 48” LC New Carpet Poles - 3” Diameter x 120” long - Class III - Weight 360 - Capacity 2200 @ 48” LC Carriages 78” Wide Class IV Carriage for Hyster H155XL/Yale GDP155 - Triple Mast ONLY fork clamps Cascade 35D-CF-08A Non Side-Shifting Fork Clamp - Class II - 1.5 x 5 x 42” Forks - 3,500 lbs. @ 24” Capacity - 17” to 61” Range - Good Blocks - Good Cond - On Pallet Load Pushers Cascade 35E-PLB-180 Push-Pull - Class II - 1.5 x 4 x 48” Class II Forks - 3,200 lbs. @ 24” Capacity - Good Blocks - Good Cond - On Pallet 2- Cascade 45E-PLS-411 Class II Load Pusher - Ready for Class II Forks - 950 lbs. - On PALLET Cascade 35E-PLS-234 Side-Shifting Load Push - Class II - 1.75 x 5 x 48” Class II Forks - 859 lbs. 3,500 lbs. Capacity - Good Blocks - Good Cond. - On PALLET Paper Roll Clamps MANY AVAILABLE---MANY SIZES---CALL FOR DETAILS Cascade 77F-RCS-196 360⁰ Rotating Swing Frame Paper Roll Clamp - Class IV - 10” to 60” Roll Range - Weight 2,850 lbs - Capacity 7,700 lbs @ 60” Roll - Good Blocks - Good Cond - On PALLET Cascade 90F-RCS-173 - 360 Rotating Swing Frame Paper Roll Clamp - Class IV - 10-60” Roll Range - 9,000 lbs @ 30” Capacity - 2,850 lbs. - Good Blocks - Good Condition Cascade 90F-RCP-283 360⁰ Rotating Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 3,000 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond. Cascade 90F-RCP-01CR2 360⁰ Rotating Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 2,850 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond. Cascade 90F-RCP-01CR2 360⁰ Rotating Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 2,850 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond. Cascade R90F-RCP-01C 360⁰ Rotating Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 2,850 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond Cascade 90F-RCP-01C 360⁰ Rotating Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 2,850 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond - On PALLET Cascade R90F-RCP-01C 360⁰ Rotating Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 2,850 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond Cascade R90F-RCP-609C2 360⁰ Rotating Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 2,850 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond - On PALLET Cascade 90F-RCS-173 360⁰ Rotating Swing Frame Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 2,850 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond. Cascade 90F-RCS-166 360⁰ Rotating Swing Frame Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 2,850 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond. Cascade 90F-RCS-21CR1 360⁰ Rotating Swing Frame Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 3,050 lbs - Capacity 9,000 lbs @ 60” Roll - Good Blocks - Good Cond - On Pallet Cascade 100F-RCS-21CR1 360⁰ Rotating Swing Frame Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 3,500 lbs - Capacity 10,000 lbs @ 60” Roll - Good Blocks - Good Cond - On Pallet Cascade R100E-RCP-01C 360⁰ Rotating Swing Frame Paper Roll Clamp w/ Positioned Short Arm - Class IV - 10” to 60” Roll Range - Weight 3,010 lbs - Capacity 10,000 lbs @ 60” Roll - Good Blocks - Good Cond - On PALLET Push Pulls 7- Loran 11097 Push-Pull - Class II - 11” x 42” Platens - Weight 1,175 lbs - 3,500 Lbs Capacity - On PALLET Cascade 35E-PPS-A001R4 Side-Shifting Push-Pull- Class II - 18 x 48” Platens - 1105 lbs. 3,500 lbs. Capacity - Good Blocks - Good Cond. - On PALLET Cascade 35E-PPS-A003 Side-Shifting Push-Pull - Class II - 15 x 48” Platens - 3,500 lbs Cap. - 1,055 lbs. - Good Blocks - Good Cond. Cascade 45E-PXB-199 Extended Range Push-Pull - Class II - 26 x 47” Platens - 3,600 lbs. @ 36” Capacity - Good Blocks - Good Condition. Cascade 45E-PXB-199 Extended Range Push-Pull - Class II - 26 x 47” Platens - 3,600 lbs. @ 36” Capacity - Good Blocks - Good Condition.


Precision Remanufactured HydraulicINCORPORATION

CylindersPower

SteeringPumps

ValvesQuality & Value

for Over50 yearsNew and Remanufactured Exchange

HADER Incorporated

P.O. Box 510260 • New Berlin, WI 53151-0260Shipping: 15600 W. Lincon Ave. • New Berlin, WI 53151

Visit us on the web at www.haderind.com

Toll Free: (877) 388-2102Phone: (262) 641-8000

Toll Free Fax: (877) 384-1654Fax: (262) 641-8010


Pre-Owned SaleMalin Pre-Owned Lift TrucksThe Malin Used OUTLET provides easy access to thousands of lift trucks. Our CustomerSupport Team is focused on providing what you need at very economical price points.We take pride in providing exceptional value and in the fact that “our lift trucks per-form as expected.” Remember, we have other brands available(up to 30,000-lb capacity).

Our goal is to make acquiring pre-owned lift trucks as easy as picking up yourphone and contacting The Malin Used OUTLET. Our pre-owned program providesquality lift truck solutions at an affordable price. The only difference is that the lift truck is pre-owned!

Choose from a wide selection of models, brands and options. If we do not have exactly what you need in stock, give us a little time and we will locate it for you. Our pre-owned program has the resources to satisfy your needs.

DISCOUNT PRICINGHUGE INVENTORY

WARRANTY

Reach Trucks

Reach-Fork® Trucks

Deep-Reach® Trucks

4-Directional Reach Trucks

Swing-Reach® Trucks

Orderpickers

5000 Series

EASi® Orderpickers

Counterbalanced Trucks

Sit-Down Counterbalanced Trucks

Stand-Up Counterbalanced Trucks

Pallet Trucks / Walkies

End Rider Pallet Trucks

Contact Judy [email protected]

(800) 926-2546 MalinUSA.com


Become the Exception

Sometimes “Stuff” HappensBy: Mike Marchev

Dallas was hosting Denver one Sunday and the experts were expecting a real shoot-out.

Little did they know that the score would be knotted at 48 going into the final moments.

Two quarterbacks were playing their trade while it appeared that two defen-sive units were playing “Marco Polo” on grass. My message today involves the “losing” quarterback. He was good. But not when it counted.

This guy did everything right for most of the game. Allow me to remind you that most does not translate to 100%. He was putting on an exhibition of how to be a top-rated QB in the NFL for 95% of the game. He goes by the name Tony Romo. But … even with over 500 yards passing (a Dallas Cowboy club record) and 48 points on the board, one ill-timed interception was all it took to ruin a nice day’s work. In fact, Mr. Romo ended up on the losing side of the score card thanks to that errant flip of the wrist. He was good. But he was not quite good enough. One single mistake at the end of the game was all he needed to end his joy ride.

And so it is with you my friends. You must be good and you must continue to be good if you want to win at this thing called business. Your competitors are also trying to win. They also are playing hard. And the last thing you want to do is sabotage your chances for success by shooting yourself in the foot for any reason. You must maintain your composure at all times and select your movements judiciously.

You too are playing a contact sport. You too will get knocked down on occasion. You too will have some questionable calls go against you. But the secret is to get into a position where you can win in the end, and not run out of time, and not elect to do something foolish.

Football or no football, the Denver Broncos and Dallas Cowboys served as a great reminder to all of us who enjoy eating regularly as a result of our conducting a successful travel business.

#1: It ain’t over til its over.

#2: It is sometimes wise to take a small loss rather than risk a huge gain. Especially when time is not on your side and the opposing QB goes by the name of Peyton Manning.

#3: Don’t ever bet against Peyton Manning.

Contact Mike at [email protected] or visit www.mikemarchev.com

Hi-GEAR® offers a complete line of replacement parts for industrial/commerical SWEEPERS and SCRUBBERS.

PROMPTSERVICE

TECHSUPPORT

®

Quality Floor Machine Parts is our Speciality, not our Sideline!

Phone: 859-291-0160 Fax: 859-291-0197 Email: [email protected]

QUALITYPARTS

Advance | American Lincoln | Castex | Clarke | Eagle | Factory Cat

Kent | Minuteman Hako | Nobles | Power Boss® | Star | Tennant

• Air Filters

• Battery Chargers

• Bearings

• Body

• Brooms

• Brushes

• Casters

• Discharge Hoses

• Drain Hoses

• Drain Plugs

• Drive Axle

• Electric Drive

• Engine Parts

• Flaps

• Frame

• Fuel Filters• Gaskets

• Hydraulic Drive

• Knobs

• Latches

• Lights

• LP Gas

• Oil Filters

• Panel Filters

• Seals

• Seats

• Skirts

• Squeegees

• Steering Axle

• Suction Hoses

• Switches

• Vaccum Motors

• Vacuum Hoses

800.346.2319Call Who the Experts Call!

facebook.com/mhnetwork

Find us onFacebook


We Will Solve Your Mobility Problems

OPP 9/10

Material Handling Solutions

NUTTINGOrder Picking Platforms

are used in conjunction with electric order pickers to increase productivity and safety.

All models include safety features: forkguides with stirrups,hardwood clamp block and flush interface between platform and

electric order picker.

Models built to suit specific applications. Available in any sizeor capacity. Choose from steel, aluminum or wood deck.

Contact NUTTING today for a creativesolution to your unique material

handling needs.

www.acconutting.com

800-533-0337450 Pheasant Ridge Drive

Watertown, SD 57201

FOR UNTRAINED LIFT TRUCK OPERATORS

CONFIDENTIAL DISTRIBUTOR PRICING English Kit OR Spanish Kit $149.00* ($299.00 retail) English / Spanish Combo Kit $249.00* ($399.00 retail) Additional Operator Handbooks, Authorization Cards, Certificates $49.00/pkg ($49.00 retail) (25 per package) English - Spanish - OR English/Spanish Combo

*Distributor Pricing Applies To Qualified Forklift Dealers and Large Quantity Discounts

These COMPLETE 2-Hour OSHA Compliant Training Kits Include:• Instructors Training Manual• Video-Interactive (DVD format)• Operator Handbooks (25)• Authorization Cards (25)• Certificates (25)

• Reproducible Forms: Written and Driving Test Class Roster 31 Day Inspection Form• Posters (2) “10 Forklift Safety Rules”

REDUCED DISTRIBUTOR PRICINGRRRRRREEEEEEDDDDDDUUUUUUCCCCCCEEEEEEDDDDDD

Plus Shipping & Handling

• Decal (1) “10 Forklift Safety Rules”• OSHA Regulation 29CFR1910.178• Safe Fuel / Battery Handling• Forklift Safety NEWS® Publication

The Nation’s Leader in Forklift Operator Training

(800) 494-3225

NOW THERE ARE

WWW.FORKLIFTSAFETY.COM

We Offer Over 6,000 Part Numbers To Keep You

Competitive.New Controls • Remanufactured Controls • Battery Chargers & More

FSIP Flight Systems Industrial Products 800-333-1194 • www.fsip.biz • 1015 Harrisburg Pike Carlisle, PA 17013


Toll Free: 888-288-9078 • Fax: 314-381-5908www.gatewayrack.com • Email: [email protected]

CORPORATION

GATEWAY RACK®

MATERIAL HANDLING

INDUSTRYOF AMERICA

M E M B E R C O M P A N Y

DEALER’S CHOICEMove more material, cut handling time• Knock down or nest when empty• Utilize air space, save floor space• Custom designs available• Prevent product damage• Powder coat paint


NEW SBCONNECTORS

NEW SHROUDS

NEW RESISTANT PAINT

NEW VENT CAPS

NEW CABLES

Make the Environmental Choice and Save Money!

Celebrating a decade as the Global Leader in Reconditioned

Industrial Batteries and Regenerative Technology.

YEARWARRANTY1

The cost of these batteries is less than 40% of the cost of new and they come standard with a one year warranty.

Each Regen battery has undergone the 18-stage reconditioning process and has a minimum rated capacity of 85%. All batteries are cleaned, neutralized, sanded and repainted prior to shipping. They also come with new vent caps, shrouds and cables.

Regen Batteries are the perfect solution in applications requiring 5 hours orless of daily usage. These include small business operations, back-up batteries, rental units, and used truck sales.

1.877.422.9797 www.xtrapowerbatteries.com

WE KNOW TRANSMISSIONS...

AND WE KNOW STEER AXLES!


20395 Hannan Pkwy. Walton Hills, OH

800-588-7515 • Fx 440-232-8142

[email protected] • www.aittransmission.com

STEER AXLESSTEER AXLESREMANUFACTURED

Over the past 35 years, AIT has equipped their shop with specialty tools and equipment. This machine shop capability makes it possible to reman steer axles for you.

We subcontract the chroming of the cylinders, but the rest of the process is done in-house by AIT.


powRparts.com THE MOTIVE POWER ONLINE STORE

Register online for wholesale pricing!!!• Set-up a user account online at www.powRparts.com • Once registered, send an email to [email protected] giving us your user name and your request for a wholesale account.• Upon receipt, we will set your account to wholesale status. This will entitle you to discounts of 15% or more off of our online prices whenever you log in.

• Watering guns• Deionizers• Single Point Watering• Charger repair parts• Battery Cables• Vent Caps• Watering Carts• Battery Connectors

• Battery room supplies• Spill products• AC & DC fuses• Tools for battery repair• Safety items• Battery cleaning supplies• Charger cables & lugs• Replacement cells

Flip Top Vent Cap

powRparts.com 888-547-2115

Only $.85 ea!

Only $64.00

PARTS & ENGINE EXPERTSCALL TOLL FREE

888.331.5769

- In Stock NOW! - 2 Year Warranty- No Core Charge - Save on Freight

www.psiengines.com

NEW4.3L

NEW3.0L

NEW2.4L


Hook Up with Network

Advertise your equipment with Network. We make it easy!

[email protected]

For more information, view the crash impact video

at www.steelking.com/steelguardor call 800-826-0203 for a FREE brochure

Ask for the

RealSTEEL GUARD®

• Engineered for safety and damage control against industrial truck collisions.

• Absorb and deflect impact with 11-gauge corrugated steel railings and ¼” structural steel columns

• Keep personnel safe with folded metal rail edges

• 48-hour shipping available on most sizes

The original – Still the best!

When only one thing stands between YOU and DISASTER...

For more information on Drexel Swingmast, EX Rated Trucks & the Combilift Please contact John Gowland at

1-800-651-5850 or e-mail [email protected] Lift Truck

Drexel Dealer

Since 1972 in

North America

“DREXEL SWINGMAST & EXPLOSION PROOF (EX) COMBILIFT 4-DIRECTIONAL SIDELOADER

FORKLIFT EQUIPMENT”

Provide Safe, Secure, Material Handling Solutions

• One Truck That Does It All!• Lift Heights up to 360”• Operates in 4 1/2 ft. VNA Aisle • Long Load Handling

3-WheelSLT 22 & 30

Late models in stock1984-2006

ReconditionedIncludes Warranty

1999/2001 3,000 lb. -Elec. - 250”Lift Hours vary - Wire Guided

Rental or Retail ReadyNewly Painted, Includes Warranty

FL40EX & FL60EXExplosion Proof

Ex RatedLimit your exposure to

potential hazards.ANSI/UL583 Standards

Combilift 4-Directional Sideloader

C5,000 to C50,000C6,000GT / C10,000GT

SALES RENTALS PARTSSPECIAL OF THE MONTH

SLT30


ASSOCIATIONS

ENGINES

Your direct connection to the Material Handling Industry’s hottest trends, newest products, best management training workshops & represents a wealth of resources

for all material handling businesses.

www.mheda.org — 847.680.3500

DECALS

LOOKING FOR DECALS? NNWe’ve Got ‘Em!

Decal Kits for Forklifts and Industrial Equipment

Now Open9am - 7pm Est. Time

M - F for our West CoastCustomers

[email protected]

Controllers �Handsets �Chargers

BOHlinger Inc.Energy & TransporationInnovations with Electricity

600 East Elm StreetConshohocken PA 19428Tel: 610.825.0440800.237.4818Fax: 610.825.2730email: [email protected]

Ask about our many other in-stock and custom products.Immediate delivery on many items (full line Curtis distributor)

Bumpy Rides?

L O G I S T E R R A , I N C.6190-K Fairmount Ave San Diego CA 92120

[email protected] • www.logisterra.com619-280-9992

®with a LOGISTERRAtruck-mount Holder

Secure Your Terminaland Holster Your

Side Arm...

• Proven products• Years in service• Deployed worldwide• Made in USA

...or a slinger,right or left

ERGONOMIC HOLSTERS

Stay Informed.

FollowNetwork!

www.twitter.com/mhnetwork

FLEET MAINTENANCE

Offering the COMPLETE range of industrial tires!

•IndustrialPneumatics: RadialandCross–Ply•SolidTires: SuperElasticResilient andPress–OnBands•Multi–Purpose(MPT)

877-235-0102 • www.continental-industrial.com

FORKLIFTS

www.forkliftnetwork.ca

Don’t be a stranger

Remanufactured Engines

“Quality Assured WorkmanshipFrom People Who

Know The Business!”

www.all-industrial.comALL INDUSTRIAL ENGINE SERVICE

Enignes In-Stock For Same Day ShipmentToll Free 877-303-LIFT • 440-943-9546 • FAX 440-943-9547

FORKLIFT TIRES

Flight Systems Industrial Products

1-800-333-1194 • www.fsip.biz 1015 Harrisburg Pike Carlisle, PA 17013

$ave Money with OEM Certified

Remanufactured Controls

FSIPFlight Systems Industrial Products

1-800-333-1194 • www.fsip.biz 1015 Harrisburg Pike Carlisle, PA 17013

Also Remanufacturing Joysticks, Dash Displays,

Battery Chargers & More

CONTROLS

West Coast: Tailift USA909-930-9801 www.tailift-usa.com

East Coast: Worldwide Wholesale Forklifts954-768-9875 www.worldwideforklifts.com

EVEN the moon can make it shine...

West Coast: Tailift USA909-930-9801 www.tailift-usa.com

East Coast: Worldwide Wholesale Forklifts954-768-9875 www.worldwideforklifts.com

EVEN the moon can make it shine...

USED FORKLIFTS!

Cell: 201-519-3552 Office: 201-768-8044

48 Bi-State Plaza, #230, Old Tappan, NJ 07675

Fx: 201-784-2470 Email: [email protected]

GUARD RAILS

For more information, view the crash impact video

at www.steelking.com/steelguard or call 800-826-0203 for a FREE brochure

When only one thing stands between YOU and DISASTER...

Ask for the

RealSTEEL GUARD®


SWEEPERS/SCRUBBERS

Shift to

• Advance• American Lincoln• Clarke Floor Scrubber• Factory Cat• Hako/Minuteman• Power Boss• Tennant• Tornado

www.hi-gear.com • [email protected] Local: 859-291-0160 Fax: 859-291-0197

Buy Now & Save 50-60% Off List Price

TIRES & WHEELS

TRANSPORTATION

Forklifts and Machinery a Specialty.www.rldtrans.com

ph 508.991.6660 fx [email protected] | [email protected] | [email protected]

SALES AND MARKETING

Send for Mike’s FREE Special Report: How To Immediately Grab A

Prospect’s Attention.Email Mike at [email protected]

Write the word “grab” in the subject line.

with Mike Marchev“Become the Exception”

Mike is the author of our Become the Exception Column on Page ____32

PERSONNEL CARRIERS

SOMERVILLE EQUIPMENT 1080 Fewster Drive, Mississauga, Ontario, CANADA, L4W 2T2 Toll-Free: 1-877-773-6599 Fax: 905-625-5881 E-mail: [email protected]

BURDEN/PERSONNEL CARRIERS • TOW TRACTORS • AIRLINE EQUIPMENT • LIFT TRUCKS

PARTSSALES SERVICE

Call: 800.414.2095 E-Mail: [email protected] www.maxiforce.com

Specializing in parts for Perkins® EnginesExtensive Coverage

Technical Support

Parts In Stock

Same Day Shipping

• LOAD WHEELS, CASTER WHEELS, DRIVE TIRES, ALL OEM SIZES • REMOLDING AVAILABLE FOR OBSOLETE WHEELS OR WHEELS TOO EXPENSIVE TO BUY NEW.• CUSTOM SIZES PER YOUR SPECIFICATIONS.• CONVEYOR ROLLS

WILL MODIFY OEM SIZES TO FIT YOUR SPECS.

VARIETY OF COMPOUNDS AVAILABLE

J&L INDUSTRIAL TIRE CO.CORSICANA, TEXAS

903-874-5796 903-874-5801 FAXwww.jandlindustrialtireco.com

[email protected]

PROPANE PARTS

Fueling the Future, Today...We warehouse a large volume of stock to accommodate our customers needs.Specializing in:• Alternative Fuel Systems• Conversion Kits (NG/LP) for:

• Forklifts• Generators

• Small Engines• Automotive

www.centuryfuelproducts.comE-mail: [email protected]

Phone: 734-728-0300 / Fax: 734-728-0303

PARTS

Make a Clean Sweep of Your Workplace!

Quality Magnetic Sweepers.Discount Pricing.

www.magsweepers.com 602-842-1930

Puzzled about advertising?Let Network help you!

Andra or Nancy will help you decide on an advertising campaign that fits your budget.

309-699-4431 • 800-447-6901

[email protected]

[email protected]


Creamer’s Corner

The Clarke American SC 7740 Sweeper/ScrubberBy: Micheal Creamer

The American Lincoln SC7740 is one of those machines that are just perfect for building up to approximately 200,000 square feet. It sweeps

and/or scrubs independently of one another, which is a feature I would always recommend.

So, when I received this e-mail saying they had purchased a used machine. I was very excited for them. As I responded to this e-mail, I stated “If you would ever want a good candidate to purchase used, this is on my list....

There are all kinds of summations I can make, but in a nut shell, here they are...1. It is a sweeper/scrubber.

2. It is equipped with not one, but two models of Kubota engines. One is a three cylinder with plenty of power. The other a four cylinder with even more. Either one is perfect for the machine.

3. The small size makes this machine very maneuver-able in any factory setting. Don’t be fooled by this either; just 47” (about 4’) wide by 89” (about 7-1/2”) long makes this machine a real work horse by size.

Later in this e-mail, he stated that no manuals were provided with the machine and he needed help with parts look-up. So, I told him to e-mail pictures of the machine and also include the engine compartment. I

wanted to know what engine it had. I also requested pictures of the main broom area. You can do this by opening the broom doors on both sides of this machine After reviewing the pictures and his general input on how the engine ran, I responded as follows: “With 800 hours on it as you indicated and no maintenance records, I always assume the worse and would recommend the following action be taken...1. Replace the main broom and side broom. Being a

large warehouse you can replace them with Polyurethane. The three scrub brushes can also use poly. See how you like them for the first time and we can look at the next time they need to be ordered.

2. Replace all the skirts. This would include the main broom chamber and all the hopper skirts.

3. Replace all the side (both left and right) squeegees. Just the standard gum rubber should suffice.

4. Replace the rear squeegees, both inner and outer. I like Urethane over gum, however, the price is about three times more. Urethane wears like iron and holds up to any chemical. However, if you want first to get it in working order, use gum rubber, for now.

5. Replace the hopper filter. I would replace it with first the standard paper filter.

Next I would tell you to follow the general maintenance in the manual that I would provide. Listed below are the important ones...1. Empty the dirty water tank and spray out the tank

with a pressure washer if you have one, if not use a garden hose. Make sure you open the clean-out door to allow the liquid and debris to leave the tank.

2. Change the motor oil whether it looks good or not. Remember you do not know when it was last changed. After this the oil should be changed every 200 hours.

3. Change the spark plugs, engine air filter and fuel filter. Gas or LPG will have this fuel filter. If it has water cooled engine you will need to change the anti-freeze as well.

4. Clean the hydraulic reservoir and replace the fluid. From this point every 400 hours should be the normal routine. You should be able to just clean the intake strainer, however, you will want to replace the hydraulic filters.

5. Lastly, with a grease gun, make sure to grease all the zirk fittings. They will be listed in your manual.

For those buying used sweeper/scrubbers, let me know if I can help you.

As always, thanks for reading. You can e-mail me a [email protected]

1995 CAT DP70 217” STD, S/S, 96” FKS, DUALS

2004 CAT DP80 197” STD, S/S, 96” FKS

2005 CAT DP90 140” STD, S/S, 96” FKS, CAB

2006 CAT DP70 177” STD, S/S, CAB

2006 HYSTER H80XM 146” STD, S/S, 48” FKS

2008 HYSTER H190HD 121” STD, FP, 96” FKS

2008 HYSTER H360HD 183” STD, CAB

2009 HYSTER H280HD 183” STD, 44” FKS, S/S, FP

2005 MASTERCRAFT C-06 168” STD, S/S, 4WD

(6) 2008 YALE MPB040 48” X 27” OAW, BATT

2004 YALE GLP100 159” STD, DUALS, 48” FKS

(4) 2006 YALE GLC070 181” TSU, LPG, 4 WAY, S/S

765/497-6477 • [email protected] • 3645 Chesterfield Way, W. Lafayette, IN 47906

Cell: 910/256-1836 Fax: 765/497-6433

CALL AL RALPHAT 765/497-6477

Hyster H280HD


PA Industrial Equipment, Inc.215 S. Washington St. Boyertown, PA 19512

610/369-9778CONTACT ROY BRAMM

www.PAIndustrial.com

QTY YR. MAKE MODEL DESCRIPTION PRICE1 2007 CAT C6000 83/186 TSU, S/S, LP, 10,000 HRS $6,9001 2010 CROWN RD5725-30 131/300 TSU, S/S, 36V, DEEP REACH $14,7001 2008 DOOSAN D33S-5 85/186 TSU, S/S, DSL, CAB, 6400 HRS $13,3001 2001 HYSTER H155XL 129/170 WV, S/S, LP $19,5001 2006 HYSTER E50Z 83/189 TSU, 4 WAY, 36V, NO BATT $3,5001 2007 HYSTER E50Z 83/240 QUAD, 4 WAY, 36 VOLT BATT $7,9001 2005 HYUNDAI HLF25C-5 84/185 TSU, S/S, LP, 4900 HRS $6,9001 2007 KOMATSU FG40ZT-8 113/170 WV, S/S, LP, 3600 HRS $13,9001 2007 KOMATSU FG40ZT-8 93/131 WV, S/S, LP, 5600 HRS $14,9001 2006 MITSU FGC25 83/188 TSU, S/S, LP $7,9001 2006 MITSU FBC45N 92/183 TSU, S/S, 48V, $11,5002 2007 TOYOTA 7FGCU25 83/188 TSU, S/S, LP, 3900 & 4300 HRS $8,900 EA1 2007 TOYOTA 8FGCU25 96/276 QUAD, S/S, HIGH HRS $8,9001 2007 TUSK 500CG-16 83/188 TSU, S/S, LP, 8900 HRS $7,2001 2008 TUSK 400CGH 79/167 TSU, S/S, LP $7,4001 2005 YALE GLC050VX 83/240 QUAD, 4 WAY, LP $6,4001 2006 YALE GLC100 100/209 TSU, S/S, LP, 2400 HRS $9,9001 2006 YALE GLC100MJ 92/185 TSU, 4 WAY, 4500 HRS $14,9001 2008 YALE GLP050VX 84/189 TSU, S/S, LP, AUTO $9,900

Promote your company’s products and services in Networks’ January 2014

DIRECTORY of Material Handling

RESERVE YOUR SPACE NOW!

Deadline for the JANUARY 2014

DIRECTORY is NOVEMBER 15th

CALL TODAY! 800.447.6901

Andra - [email protected] - [email protected]

New Solid Rubber Tire for Passenger Boarding Bridges

Press and Wheel Company SOUTHEAST

We accept Visa and MasterCard.

• WHEEL & RIMS FOR FORKLIFT & MATERIAL HANDLING EQUIPMENT

To Order or get Quotes OnlineCheck out www.southeastwheel.com

•FULLRANGEOFSIZES•SINGLEORDUALSPACING

•ALSOSPECIALIZING INBOBCATWHEELS

SERVICE IS OUR GOAL

353-BOldAirportRoad•Bristol,VA24201

Phone: 276/669-1222•Fax:276/669-1120email: [email protected]

•MoldedwithACtreadforimproved tractionandperformance

•Nomoreflattirechanges

•Noneedfornitrogenservicing

•Eliminatesthedangersand maintenancesafetyhazardsof PBBpneumatictirechanges

•MountedonyourexistingPBBwheel rims:Usingyourpartsandcomponents formountingtoPBBdrivesystem

•Tireis:Re-capable•Tirecanbe:re-groovedwithsiping•Tirecanbe:cutdown&re-grooved withtread

Call: 888-669-1222


Efficient and Effective By: Curtis Clark, Western Regional Sales Manager at Superior Tire & Rubber Corp.

Managing your service department is probably the most dynamic piece in the dealership. There are many moving parts and communica-

tion with other departments is key. It’s important to take some time to develop and work toward servicing your customers efficiently and effectively. This can be accomplished by changes to your dispatching or even how you stock parts on vans. However, it still comes back to communication to make sure things are happening the way you need them to. Dispatching How you dispatch calls is critical to how you take care of customers and how quickly you can get equipment back up and running. The first thing to look at is what technology you already have that can allow you to dispatch more effectively. Do you run GPS on service vans or on phones provided to technicians? If so, is there a way you can use that GPS data to help in dispatching? There may be simple easy ways of using the data you already get with GPS and use it as a tool to help in dispatching. How often have you sent someone who was an hour away from a job instead of sending the technician 15 minutes away? Utilizing the technology you’re already spending money on can help maximize not only response time but also help cut costs in wear and tear on vans and on your fuel bill. If you don’t have GPS technology at hand, consider dedicating technicians to zones. Those zones can be near where

they live to easily make calls first thing in the morning or in areas where it may be the outlying part of your territory. Having the techs in zones and looking at where you’re making calls can help make the same difference in response time and cost reduction. Van Inventories Van inventories are a tricky piece of the puzzle, there are certain key items that most, if not all, vans should have. Making sure that you’re looking at them and modifying the inventories is important. Van inventories and communication between departments is crucial. You need Parts to get the inventory and allocate it to the van. If you get new customers on PM, it’s especially important for Sales to get that information not only to Service to set the PM schedule but also to Parts to make sure you have adequate stock for normal PM items. What about large accounts? Do you have a fleet of trucks that is handled by a certain technician or two? It’s important that the van is tied to that account inventory wise. If you make a change in technician at that account then a van swap should be done to ensure that any inventory set up for that account remains with that account. Revisiting the zones topic, there might be zones that are dominated by more of a certain class of truck. Wouldn’t it be effective to make sure that the van inventories are set up to support that type of equipment rather than a one size fits all inventory? When working with van inventories, it’s important to remember that you

have limited space so it’s what you do with that space that makes a difference in how you service a customer. If you have a technician that works on class 2 and 3 equipment 80% of the time, should he really have 12 oil filters on his van? The same can be said for a techni-cian that works mostly on class 4 and 5 equipment, should he have parts for electric equipment on his van? Maximizing the space by making sure the vans are tied to customers or zones can help in making sure you have the right parts for the job on the van. There are always more ways to pick up efficiencies; there are also times when much of this is going to go out the window due to customer requests or the need for a certain technician to take care of something. Managing those exceptions are important but building a steady procedure on how you dispatch and how you manage van inventories can go a long way to making sure that you’re not only maximizing uptime for your customer but also maximizing your labor, parts, and recovery cost dollar. Customers are concerned about price but they are also concerned with keeping their investment in equipment up and running.

Contact Curtis Clark of Superior Tire & Rubber Corp. at 800/289-1456 Ext. 100 or [email protected].

Service Dept. Expectations


The Dealers’

Source For

Portable RacksTM

Stock Program Available

on Some Sizes / Designs

Toll-Free: 800/939-3962

Phone: 636/527-1868 Fax: 636/256-8963

www.dyna-rack.com [email protected]

Pallet Frames

StackRacks

NestableRacks

Fire Protection • Product Friendly • Uniform Strength

No Waterfall Edge • Hi-Tech Look • Ergonomically Designed

Rack Deck / Dacs

800.909.4937

www.rackdeck.com

Punch Up Your Storage Solutions!


www.mhnetwork.com Ph 800.447.6901 Fx 800.230.6218 [email protected]

Atte

ntio

n Po

stm

aste

r:

PLAT

TEVI

LLE,

WI

PAID

2407

Was

hingt

on R

d.

Was

hingt

on, I

L 61

571

Chan

ge S

ervic

e Re

ques

ted

A Di

visio

n of

Woo

dwar

d Co

mm

unica

tions

, Inc

.

PRSR

T ST

D

U.S.

Pos

tage

Perm

it No

. 126

This

is da

ted

mat

eria

l.

PLEA

SE R

USH

Net

work

MATE

RIA

LH

AN

DLIN

G

“Save”ty Yellow Products Celebrates 10 Years!

“Save”ty Yellow Products Celebrates 10 Years!

Yellow Products“Save”ty

®

877-728-3891 www.save-ty.com

View Network

Magazine Online:

Tired of Sharing Your Copy of Material Handling Network?Receive Your Own Copy for FREE!

Prefer the Digital Edition?Use the quick sign-up at:

www.mhnetwork.com/material-handling-network-digital-subscription

Start getting your complimentary copy of Network magazine at:

www.mhnetwork.com/material-handling-magazine-subscriptions



2300 David Drive, Bristol, PA 19007

800-443-1500Fax 215-788-8045 • E-mail: [email protected]

45 years manufacturing experience

Short lead times

Financing available through our 10/11 program

Now you can enjoy all the advantages of flat plate battery construction along with higher amp hour capacities. Our 12-110-13 Max-Haul is the same size as a standard 12-85-13 pallet jack battery while providing over 25% more available power. The 155 amp hour

Max-Haul is the same cell size as a standard 125 amp hour cell.

www.northeastbatteries.com

Northeast Industrial Batteries Inc. is proud to announce “Max-Haul” batteries

have been added to our rental fleet.

Looking for more power?

Please call for details on this product or any other battery

or charger rental needs.


Classified SectionACCESSORIES

1-800-504-37501-800-504-3750WWW.REGENCYMETALSONL INE .COMBEN@REGENCYMETALSONL INE .COM

* INSTANT PAYMENT & PICK-UP ** 40 YEARS OF TRUSTED SERVICE *

WE PAY YOU TOP DOLLAR FOR TRUCKLOADS OF SCRAP BATTERIES.

$$$ FOR BATTERIES $$$ FOR BATTERIES

BATTERIES

MorrisonE q u i p m e n t

[email protected]

Phone: 856/243-5108

03 DOSSAN D30S6000#, 100/STD, DSL, AUTO, S/S, CAB, AIR COND,

CLEAN$7,850

00 HYSTER H135XL 13500#, 127/173, DSL, AUTO, CUBE

HANDLER, CHECKING$13,500

92 CROWN 30SCTT3000#, 83/190, 36V,

SCR, BATT, S/S, EXTRA CLEAN, LOW HOURS

$3,250

New Address:JW Morrison Equipment

800 Cenco BlvdClayton, NJ 08312

FORKLIFTS

OHIO RACK INC.BUYING & SELLING - NEW & USED

PORTABLE RACKS NATIONWIDEOhio Rack has been manufacturing new, all steel, portable stack racks and reusable shipping containers to help our customers utilize their air space to gain more density in

their warehouses and/or distribution centers.

800-344-4164Fx: 330-823-8136 [email protected]

EQUIPMENT WANTED

2409 Guenette, St. Laurent, QC. H4R 2E9, Canada

Looking to $$ Purchase $$ ForkliftsFax your Wholesale

List Today!!

Tel: 514-339-2828

Fax: 514-339-1352

email: [email protected]

FORKLIFTS

MorrisonE q u i p m e n t LOOKING

FOR

DIECAST MODELS

BUY!SELL!

TRADE!856-968-0123

856/[email protected]

KEYTROLLERCREATING A CULTURE OF SAFETY

Phone: (813) 877-4500Fax: (813) 871-6250Email: [email protected]: www.keytroller.com

• Color LCD Display • Built in WiFi • RFID Card Reader • Daily Checklist • Event Logging • Impact Sensing • Speed Sensing • Maintenance Scheduling

KEYTROLLER LCDVehicle Access & Monitoring

Impact Issues?Speeding Issues?

Unauthorized Access?FREED E M O

EXHAUST ANALYZERS

When the doors go down,CO tune-ups = easy money!

Visit our website to learn more about reducing carbon monoxide (CO), saving fuel and operating equipment at peak performance.

...The Exhaust Experts

Phone: 847-487-2780 • www.blankeindustries.com

Promote your company’s products & services in

Networks’ JANUARY 2014 Directory of

Material Handling

DEADLINE: November 15

Contact: ANDRA OR NANCY

800.447.6901 [email protected]


Advance American-Lincoln Tennant Power Boss Clarke Kent Cushman Taylor-DunnHako-MinutemanNo Minimum Quality PartsLow Prices Get Mor-Value!Same Day Shipping Late 5:00 (ET) Cut Off

www.mor-value.com

800-870-0687 • Fax: 616-406-3125

INCREASE PROFITSReplacement Parts for

SWEEPERS / SCRUBBERS and PERSONNEL VEHICLES

PARTS

REPLACEMENT PARTS FOR:

800-346-2319 Fax: 859-291-0197www.hi-gear.com

Email: [email protected]

SWEEPERS • SCRUBBERS

• American Lincoln • Hako • Tennant • Advance

• Power Boss• Clarke • Kent • Nobles

SHELVING & RACKS

WE BUY & SELL USED RACKING, SHELVING,FORKLIFTS, MATERIAL HANDLING EQUIPMENT

AND OFFICE FURNITUREWWW.WELTERSTORAGE.COM

1-800-657-4347STORAGE EQUIPMENT CO., INC.

TRANSMISSION REBUILD KITS

NEED A TRANSMISSION REBUILD KIT?

AIT CARRIES KITS FOR MOST

TRANSMISSION STYLES.

OUR KITS ARE DESIGNED

FOR TECHS, BY TECHS!

AMERICAN INDUSTRIAL TRANSMISSION, INC.

800.588.7515www.aittransmission.com

FORKLIFTS

PARTS

713-460-8197 • 800-687-3884FAX 713-460-5941

FORKLIFT & TIRES CO.LARGE INVENTORY - SAME DAY SHIPPING

SCRUBBERS/SWEEPERS

Stay Informed with Network

SAFETY

KEYTROLLERCREATING A CULTURE OF SAFETY

Phone: (813) 877-4500Fax: (813) 871-6250Email: [email protected]: www.keytroller.com

• Retro-fit to any throttle based gas, LP or diesel engine • Works with both Fly-by-Wire & Conventional Cable • When vehicle is below “idle speed” -- engine has FULL RPM • Make the workplace much safer by controlling unsafe speeds

Top Speed ControllerNO Effect on Low Speed Engine RPM!

S P E E D S A V E RTop Speed Control

MorrisonE q u i p m e n t LOOKING

FOR

DIECAST MODELS

BUY!SELL!

TRADE!856-968-0123

856/[email protected]

Call: 800-447-6901to place your classified ad in Material Handling Network.


Conductive Hose Designed for Safer Dust Control

A line of static conductive hose that is designed for use with commercial and industrial vacuum equipment to help enhance safety and prevent floors from being marked is available from Flexaust of Warsaw, Indiana. Flexaust®-TUEC StatPath® Plus Conductive Hose helps prevent static buildup to reduce the explosion hazard involved with dust removal and features a non-marking polyethylene outer coating which prevents floors from being marked. Available with cuffs and a full range of wands and tool attachmetns.

P Series LED Downlights

Acuity Brands, Inc. (NYSE: AYI) has extended its line of P Series LED Downlighting Modules from Lithonia Lighting®. The family now features 4-inch, 5-inch and 6-inch LED modules that deliver an expected service life of 46 years* for a wide range of applications. Designed to fit almost any manufac-turer’s recessed can-style housings (4-inch, 5-inch and 6-inch) for no-hassle retrofitting, the new P Series LED downlights offer more flexibility with the most popular downlight sizes for residential and light commercial applications. Additionally, the new 4-inch P Series LED downlight offers the same light output as a 65-watt incandescent lamp, to deliver more illumination from a smaller fixture size.

New EDGE® 3-Pt. Rotary Brush Cutters

CEAttachments, Inc., a global supplier of attachments and accessories for compact equipment, announces the addition of all new EDGE 3-Pt. Rotary Brush Cutter attachments for compact utility tractors. The new EDGE 3-Pt. Rotary Brush Cutters are designed to make short work of your land maintenance needs. These cutters feature a beavertail style rear deck panel constructed of heavy duty 11-gauge steel that deflects cut material downward as it cuts. Two heavy-duty ½” thick by 4” wide blades cut brush and grass efficiently, and are mounted to a tough stump jumper pan. The rear wheel assembly features three height adjustment settings.

X-Treme DuraStripe

DuraStripe X-treme, also known as the heavy-duty DuraStripe, is made for critical environments where pivoting with forklifts / tow motors can occur frequently. DuraStripe X-Treme has a special coated surface that facilitates easy cleaning (shiny surface).The X-Treme comes with beveled edges to limit damages from dragging or pulling of pallets and is available in 2”, 3”, 4” (5, 7.5 & 10cm) and a wide variety of 5S shapes and icons (corners, T, strips, Pux…)! Please refer to our price list for pricing (same all X-treme standard colors).

Ergomat Inc. 877/374-6628 www.ergomat.com

Food Scale: Rugged, Smart, Easy To Use

A new portable, all stainless steel food service scale that is ideally suited for both commercial and educational applications is being introduced by Alliance Scale, Inc. of Canton, MA. The Alliance/OHAUS Valor 3000™ XTREME Portable Scale is an all stainless steel food scale designed for tough environments where frequent washdown is required and capacity is exceeded frequently. Suitable for recipe weighing and teaching applications, this food service scale calculates in lb., oz., lb:oz., g., kg., or fluid oz. of water units and includes specific gravity determination and percent weighing software.

Product Preview

New IRON HORSE Lift Truck Polyurethane Press Ons

Having manufactured polyurethane tires since 1985 for companies like Toyota Lift Trucks and Bishamon Material Handling Equipment, DuraStar Caster and Wheel is now proud to bring the IRONHORSE brand of polyurethane press on tires for AC driven lift trucks direct to the North American market.Available in many sizes in both 85A and 93A durometers, these tires are engineered for greater load capacities and extended service life over rubber tires in the most severe applications.

For complete information on the above Product Previews go to www.mhnetwork.com and click on Product Previews under Product News.

DursStar Casters 866/532-1698 www.durastarcasters.comAlliance Scale 800/343-6802 www.alliancescale.com

Flexaust 800/343-0428 www.flexaust.comAcuity Brands 404/853-1400 www.acuitybrands.com CEAttachments, Inc. 866-232-8224 www.ceattachments.com

tGard Access Control System

The new tGard range from Fortress Interlocks is a novel approach to controlling access to hazardous machinery and equipment. The compact, metal-bodied safety system enables the custom configuration of multiple safety products including electrical safety gate switches, mechanical trapped key interlocks and electrical operator controls, for optimum safety. tGard systems can either be configured as separate devices or integrated into one device and are wholly customized to the needs of the end user. The range of tGard components includes safety switches, personnel keys, emergency release, push buttons, estops, indicator lamps and a choice of operating handles.

Fortress Interlocks 859/578-2390 www.fortressinterlocks.com

Narrow Cart Air Lift for Ergonomic Positioning

EnKon Systems, Herkules Equip-ment Corporation’s brand name of lift systems designed and built a narrow profile Cart Scissor Lift for improving manufacturing plant safety when positioning materials. The lift’s platform design includes guides that direct the cart onto the lift for proper and efficient loading. The integrated cart present switch prevents the lift from operating unless the cart is properly in place. EnKon’s model #LSA20, one of EnKon’s narrowest air lift tables, was used as a base module for customizing this Cart Lift System to the exact specifications needed for interfacing with the customer’s existing cart.

Platinum Series Master Control Panel

When the Blue Genius™ Gold Series Touch Control Panelappeared on the market in 2009, it revolutionized dock equipment operation. Now Blue Giant has launched a premium-level Blue Genius™ that incorporates all of the powerful features of the Gold Series, but with expanded equipment functionality. “The Blue Genius™ Platinum Series Master Control Panel operates an entire loading dock system from one convenient location,” says Jeff Miller, Blue Giant’s Vice-President of Sales and Marketing. “By integrating the controls for all standard dock equipment, it improves efficiency, safety, and productivity...”

Blue Giant 800/872-2583 www.BlueGiant.com EnKon Systems 800/444-4351 www.enkon.pro


New Magnetic Tool Holders

As a leading manufac-turer of industrial workbenches and accessories, Sovella continually seeks to improve and perfect our wide range of products, and provide solutions that best meet the needs of our users. With those needs in mind, Sovella has introduced a new line of magnetic tool holders, including versions for storing sockets, wrenches, screwdrivers, pliers, ratchets, and most any steel hand tools. These new tool holders are designed to touch on all 5 of the 5S philosophies: Sort, Set in Order, Shine, Standardize, and Sustain. Sovella magnetic tool holders come in 14 styles, holding various tool sizes available for both metric and imperial tools. These holders contain a strong magnetic backing strip.

Stak System® Storage and Handling System

Lista International Corporation announces the availability of the STAK System® pallet-based storage and handling system. Based on a system of dynami-cally adjustable pallets (rather than fixed shelves) and a captive lifting and handling device, the STAK System helps maximize storage density by minimizing the vertical space requirements of each stored pallet and its contents.Ergonomically designed, the STAK system is loaded with features to save space and maximize productivity. It is fully modular, with add on bays that allow the system to grow as your capacity needs do.

Movex Conveyor Chains, Belts, Components and Bearing Supports

SLIDEWAYS, manufacturer of custom and standard plastic components and extrusions, now offers the MOVEX standard line of Conveyor Chains, Components and Bearing Supports. With this introduction SLIDEWAYS offers a readily available line of plastic chains, chain sprockets, chain idler wheels, guides, components, bearing supports and leveling pads, providing rapid response for a wide range of conveyor systems and packaging machinery applications.

Quantum Storage Systems Partners with Breast Cancer Awareness Foundation

Quantum Storage Systems is very excited to announce its new Susan G. Komen program. “We’ve decided to partner with this Breast Cancer Awareness Foundation and will be selling eight sizes of our plastic bins in PINK to do so,” explained Ed Granger, Director of Sales. “With each sale of our ‘pink’ bins, Quantum has committed to donate 15% of these sales back to this foundation. It is our goal to not only make a substantial contribu-tion to this cause, but to establish good will and additional brand recognition through this venture.”

Quantum Storage Systems 800/685-4665 www.quantumstorage.com

New Portable LED Light Tower

Leading industrial lighting manufacturer Larson Electronics has announced the release of a new portable LED light tower designed to provide the performance of LED lighting technology in a HAZLOC compliant design. The EPLC2-QP-1X150LED-100 Explosion Proof LED Light Tower from Larson Electronics is rated Class 2 Division 1 Groups C and D and produces 12,000 lumens with 12 feet of possible elevation. The EPLC2-QP-1X150LED-100 explosion proof LED light tower provides high quality light output in a hazardous location compliant design and the ability to elevate the lamp assembly up to 12 feet of height for maximum coverage.

Product Preview

15 Tons Dies Transporter for the German Automotive Industry

PTB Special Equipment supplied a custom built heavy duty electric truck for the handling of injection molds. This machine will be used for the transport of Mer-cedes Benz injection molds in Germany. In coopera-tion with the consultants and engineers of PTB, this heavy pallet truck has been developed. The custom built machine has a lifting height of 400 mm and is very ergonomic to operate by the application of an electronic steering device. This machine is also, compared to a standard forklift, very compact and highly manoeuvrable.

For complete information on the above Product Previews go to www.mhnetwork.com and click on Product Previews under Product News.

PTB Special Products 011-31-50-5422844 www.ptbspecial.comLarson Electronics 800/369-6671 www.LarsonElectronics.com

Sovella USA 770/424-0004 www.sovella.usLista International Corp 800/722-3020 www.listaintl.com Slideways 800/298-7543 www.slideways.com

New Version of Word’s First Hydraulic “Green” Mobile Column Lift, EARTHLIFT™

Stertil-Koni, the leader in heavy duty vehicle lifts, notably bus lifts, truck lifts and U.S. Military vehicle lifts, announced that it has introduced a new generation of its best-selling, “green” hydraulic mobile column lift, EARTHLIFT™, now with a lifting capacity of 18,500 lbs. per column. EARTHLIFT has been recognized as the industry’s first hydraulic “green” mobile column lift and is designed with both perfor-mance and the environment in mind. Its columns are made with components that are 98% recyclable.

Stertil-Koni 800/336-6637 www.stertil-koni.com

Floor-Cleaning Machine Floor Pads Offering

TVH in the Americas (TVH) is now stocking floor-cleaning machine floor pads. Choose from a variety of 8 colors and a large selection of sizes in either round or rectangular pads. Get the right fit for your floor- cleaning machine and the right pads for your floor care needs. Available in Natural - Polish, Spray Buff, Burnish, Red - Light Clean, Spray Buff, Tan - Dry Buffing, White - Dry Polishing, Green - Wet Scrubbing, Blue - Spray Cleaning, Black - Wet Stripping, and Brown - Dry Stripping.

Anti-Shock Technology Increases Safety and Control

Magnetek, Inc., a leading supplier of digital power and motion control systems for the material handling industry, today announced the addition of an Anti-Shock feature to its IMPULSE®•VG+ Series 4 crane controls. Magnetek’s state-of-the-art Anti-Shock technology automatically stabilizes loads by detecting and minimizing rapid increases in motor torque, thus reducing the potential for crane damage caused by operator induced “load shock.” This proactive approach not only protects the crane and building from excessive stress conditions, thereby reducing maintenance costs.

Magnetek Material Handling 800/288-8178 www.magnetekmh.com TVH 800/255-4109 www.tvh.com



November 13

The advertisers’ index is an extra service to the advertisers. The publisher does not assume liability for errors.

Locate equipment, products, services, and click on web links to get further resources.

Go to www.mhnetwork.com and begin receiving Network Digital Today!

Material Handling Network (ISSN #2155-1685) is published monthly serving the material handling industry. Editorial opinion expressed herein are the authors and do not necessarily reflect the opinion of Material Handling Network.

Material Handling Network assumes no responsibility for inaccuracies, errors or advertising content and reserves the right to reject or cancel any advertising for any reason, at any time.

Table of ContentsBecome the Exception ............. 32 Sometimes “Stuff” Happens

Classifieds ............................. 43Creamer’s Corner .................. 40 The Clarke American SC7740 Sweeper/Scrubber

Industry Link ........................... 38Product Preview ..................... 47Safety Corner ......................... 16 “Train the Trainer” Certification or Confusion

Service Dept. Expectations ........42 Efficient and Effective

Tech Talk ............................... 26 What Are You Smoking? GM 4.3L Analyzed

All Industrial Engine Service ........................B3

www.all-industrial.com

All States Eqpt ..............................................D2

www.all-states.com

All Terrain Truck & Equipment, Inc. .............D3

www.att-e.net

American Industrial Transmission, Inc. .. 25, 35

www.aittransmission.com

Bay Equipment Co ....................................... 14

www.bayequipmentco.com

Bristol Manufacturing .................................... 18

www.bristolmanufacturing.com

Carlinville Truck Equipment .......................... 26

www.ctemi.com

CharNor Inc. ................................................. 20

www.charnor.com

ClearCap ...................................................... 25

www.clearcap.com

Connell Finance Co. Inc. .............................. 23

www.usedforktrucks.com

Custom Mobile Equipment Inc .....................C4

www.versa-lift.com

Davis Material Handling ............................... 14

www.decoequipment.com

Design Storage and Handling ......................B2

www.designstorage.com

Durastar-Everest Casters & Wheels ............C2

www.durastarcaster.com

Dyna Rack ....................................................A1

www.dyna-rack.com

Flight Systems Industrial Products (FSIP) ... 33

www.fsip.biz

Fork-Co USA Sales, LLC .............................C1

www.fork-co.com

Forklift Pro .............................................. 28, 29

www.theforkliftpro.com

Forklift Safety Training Services .................. 33

www.forkliftsafety.com

Gateway Rack Corp. .................................... 34

www.GatewayRack.com

Hader Industries Inc ..................................... 30

www.haderind.com

Hi-Gear Company, Inc. ................................. 32

www.hi-gear.com

Hubs and Wheels of Emory Inc. ..................A1

www.hubsandwheelsofemory.com

Industrial Decals & Marketing Corp. ............. 16

www.industrialdecals.com

Industrial Power Products, Inc. .................... 36

www.industrialpowerproducts.com

Intermodal Equipment Exchange Inc. .......... 15

www.ieeforklift.com

Jay-Bee Lift Truck Service Corp .................. 14

www.jaybeelift.com

JH Thomas Industries LTD .......................... 37

www.jhthomas.com

Joseph Industries, Inc. ................................. 23

www.joseph.com

JW Morrison Equipment Co Inc ................... 17

www.morrisonlifts.com

L.A. Lift Attachments Inc. ............................ 12

www.lalift.ca

Malin Integrated Handling Solutions ............ 31

www.MalinUSA.com

Melmor Associates Inc ................................. 14

www.melmor.com

Midwest Lift Truck Sales, Inc. ...................... 21

[email protected]

Millennium Industrial Tire .............................A2

www.millenniumtire.com

Mor-Value Parts Company ........................... 11

www.mor-value.com

Nashville Wire Products ...............................A1

www.nashvillewire.com

National Lift Truck Inc .................................. 21

www.nlt.com

Northeast Industrial Batteries, Inc. ............... 43

www.northeastbatteries.com

Nutting .......................................................... 33

www.acconutting.com

PA Industrial Equipment ............................... 41

www.paindustrial.com

Power Solutions Inc ...................................... 36

www.psiengines.com

R & R Equipment Co .................................... 40

[email protected]

Rack Deck .................................................... 10

www.rackdeck.com

Rack Deck .................................................... 23

www.rackdeck.com

Rhino Rubber, LLC .......................................B4

www.rhinorubber.net

RLD Transportation, Inc. .............................. 10

www.rldtrans.com

Roadrunner Rubber Corp. ............................ 16

www.roadrunnertires.com

S.L.O.W. Corp .............................................. 16

www.slowcorporation.com

Shoppa’s Material Handling .........................D4

www.shoppasmaterialhandling.com

Southeast Press & Wheel Company ............ 41

www.southeastwheel.com

Steel King Industries Inc .............................. 37

www.steelking.com

Stellana U.S. ................................................ 22

www.stellana.us

Superior Engineering .................................... 13

www.superioreng.com

Superior Tire & Rubber Corp. ...................... 19

www.superiortire.com

Tailift USA CO. Inc ......................................... 9

www.tailift.com

Thombert, Inc. ..............................................D1

www.thombert.com

TransAmerican Equipment Corp. ................. 10

www.Trans-American.com

TVH ........................................................27, A4

www.tvh.com

UNIRAK Storage Systems ...........................C3

www.unirak.com

West Point Rack, Inc. ................................... 24

www.westpointrack.com

White Blaze Equipment ................................A3

www.whiteblazeinc.com

Wireway Husky .............................................B1

www.wirewayhusky.com

Xtra Power Batteries .................................... 35

www.xtrapowerbatteries.com

• TRANSMISSIONS• REBUILD KITS• DIFFERENTIALS• DRIVE AXLES• STEER AXLES• TORQUE CONVERTERS

TRANSMISSIONSTRANSMISSIONSWE KNOW


[email protected] www.aittransmission.com

maximalNor th Amer ica

World class design featuring advanced technologies & superior componentry as produced by competitive vendors the world over.

HIGH QUALITY • RELIABLE • TOUGH • AGILE

ATT&E, Inc.Contact John or Gerry:

855-444-2793907-344-2793

[email protected]

[email protected]@gci.net

T E R R I T O R I E SAVA I L A B L E

D E A L E R SW A N T E D

MAXIMALMAXIMAL

A6000

COMFORT PRO

A6000COMFORT PRO

MAXIMALMAXIMAL

A6000

COMFORT PRO

A6000COMFORT PRO

FD25T-CWE3: 5500 LBS capacity & FD35T-CWE3: 7700 LBS capacity

RT5500

• Wide view Simplex or Triplex masts

• Excellent forward view

• Side shift carriage

• Yanmar diesel engines

• Power shift transmission

• Differential lock

• High ground clearance

• Superior floating overhead guard

• Optional enclosed cab w/heat or AC

• Standard equipped with LED lights, back up alarm & amber strobe light

• COMPETITIVELY PRICED

Introducing the New Maximal Rough TerrainFinally...A New, Small RT with a Sensible & Affordable Price.

• ELECTRIC • PROPANE • DIESEL

Introducing the New A Model Series

2,000 to 70,000 LBS CAPACITY AVAILABLE

800.447.6901 www.mhnetwork.com Material Handling Network November13 D3

Prin

ted

in th

e U.

S.A

. ©20

13, T

he O

usse

t Age

ncy,

Inc.

wo#

3976

SHOPPA’S HEADQUARTERS 15217 Grand River Rd • Fort Worth, TX, 76155 • P: 817.359.1100 • F: 817.359.1110

1.866.506.2200 • [email protected]

LARGEST USED INVENTORY IN THE SOUTH

2009 TOYOTA 7FGCU55

LP, 189”FSV Mast, Hours: 7,760

$8,500

1984 TOYOTA 3FD70

132”FSV Mast,

$13,500

2000 TOYOTA 5FD70

148”V Mast, Hours: 12,100

$12,900

2008 NISSAN FG-PL01M15W

118”V Mast, Hours: 4,000-6,500

$8,900

2009 TOYOTA 7FDU35

187”FSV Mast, Hours: 8,400, Diesel

$21,500

2011 TOYOTA 8FDU25

147”V Mast,Hours: 5,600-6000

$9,500

FORKLIFTS & NARROW AISLE EQUIPMENT AERIAL EQUIPMENT

1997 Clark CGC20, 4,000 lb Capacity, LP Fuel, 187”FSV Mast 2008 JLG 2646ES, 500 lb Capacity, 24V, 26’ Mast

1998 Yale GLC060LCNSBO083BCS, 5,000 lb Capacity, LP Fuel,187”FSV Mast 2011 Aichi SV2632C, 500 lb Capacity, 24V, 26’ Mast

2006 Toyota 7FGCU25, 5,000 lb Capacity, LP Fuel, 187”FSV Mast, S/S 1999 Genie Z60/34, 500 lb Capacity, LP Fuel, 60’ Mast, 4X4

2008 Toyota 8FGCU25, 5,000 lb Capacity, LP Fuel, 218”FSV Mast, S/S 2008 JLG G12-55A, 12,000 lb Capacity, DSL, 55’ Mast

2004 Toyota 7FGCU35, 8,000 lb Capacity, LP Fuel, 187”FSV Mast, S/S SPOTTER TRUCKS

2000 Toyota 52-6FGCU45, 10,000 lb Capacity, DF Fuel, 187”FSV Mast, S/S 2000 Capacity TJ5000, DSL Fuel, DOT

1984 Toyota 3FD70, 15,500 lb Capacity, DSL Fuel, 132”V Mast, S/S 2007 Capacity TJ5000, DSL Fuel, Off Hwy

2006 Toyota 6BPU15, 3,000 lb Capacity, 24V, 240”FSV Mast 2010 Capacity TJ5000, DSL Fuel, Off Hwy

2004 Drexel SLT30, 3,000 lb Capacity, 36V, 205” Mast, S/S 2007 Capacity TJ5000, DSL Fuel, Off Hwy

2007 Bendi B4048E180, 4,000 lb Capacity, 48V, 258”QD Mast, S/S 2003 Capacity TJ5000, DSL Fuel, DOT

2002 Combi C8000, 8,000 lb Capacity, LPG Fuel 2008 Capacity TJ5000, DSL Fuel, DOT

Available Used Equipment – More in Stock, Call Omar For Listing

3 UNITS IN STOCK 4 UNITS IN STOCK

D4 November13 Material Handling Network www.mhnetwork.com 800.447.6901

Dealers, has your vendor made you look great lately?

Trust UNIRAK for quality Pallet Racking, Push Back, Pallet Flow, Carton Flow, Galvanized Rack

We provide competitive pricing and ON TIME shipments

800.348.7225Call for a quote from stock or racking made to spec.

www.unirak.comView our latest video online (go to www.youtube.com, search 2500 feet of carton flow)

Current Quick Ship Release 37, 11/1/2013. Get added to our automatic e-mail updates – [email protected]

800.447.6901 www.mhnetwork.com Material Handling Network November13 C3

Riggers Favorite ToyNow Comes inELECTRIC!

Versa-Lift 25/35 E,The New Standard For Lifting!!!

CUSTOM MOBILE EQUIPMENT INC.

Features:• Extendable Counterweight• Removable Boom• Hydrostatic Transmission• Planetary Drives• Compact size & Turning Radius

Options:• E-Series• Remote Control• Dual Fuel• Side Shift• Fork Positioner• Extended Forks• Winch• … And More

25/35 E Series and more now available at www.versa-lift.com439 E. High St. Baldwin City, KS 66006 TEL: 785-594-7474 FAX: 785-594-7475

C4 November13 Material Handling Network www.mhnetwork.com 800.447.6901

• Reman & New Engines

• Crankshaft Kits

• Engine Parts

• Techincal Assistance

We Have The Inventory You Are Looking For!We Have The Inventory You Are Looking For!

Over a Dozen Mitsubishi S6S Cores in Circulation

Engines In-Stock For Same Day Shipment!

To Place An Order:

877-303-LIFT 440-943-9546 440-943-9547 Fax

www.all-industrial.com

NOW STOCKING NISSAN K21 & K25 ENGINES

800.447.6901 www.mhnetwork.com Material Handling Network November13 B3

We have the tires for forklifts, lifts, trailers, carts, riggers and more.

Rhino Rubber, LLC is a global distribution company that provides quality industrial tire products and services. We are looking for dealers and distributors to be a part of the Rhino team that represents “Excellence in Service” with a commitment to the principles of continuous improvement, quality and competitive products. Our team will take the “pain” out of the supply chain process.

Join the Rhino Team. Contact us today to become a Rhino dealer or distributor. Move it exclusively…Move it on Rhino.

Easy to Find...Tough to Beat.

Warehouse: 234-678-7863 • Toll Free: 877-744-6603Fax: 888-480-8611 • www.rhinorubber.net

Rhino Rubber Warehouse • 1075 Jenkins Blvd • Akron, OH 44306

B4 November13 Material Handling Network www.mhnetwork.com 800.447.6901

Call Toll Free (877) 621-5438 | www.whiteblazeinc.com

Check Our Website Often for Constantly Changing Inventory

www.whiteblazeinc.com

WHITE BLAZE EQUIPMENT

New Hydraulic and Mechanical Rigger Booms in Stock and Ready to Ship for Trucks from 6 – 15,500 lb. Capacity with Class III and IV Carriages

Class III & IV Rigger Booms

2000 Riger Lift R80- 13,500 lbs @ 24” LC- 2 Stage Chain Mast- 124” Lwr with 173” Lift- 72” Fork Positioning Forks- LPG Ford 6 Cylinder- 2 Speed Power Shift- 82” OAW

1996 Clark GPH 160

NEW 2013 Brute LiftBT140-24HD

- 140,000 lbs @ 24” Load Center- 118” Lowered with 120” Direct Lift- Cummins Diesel Tier III Engine- Clark Power-Shift Transmission- Forks & Optional Riggers Boom- Super Single Drive Tires- Removable Counterweights

- 80,000 lbs @ 24” LC- 4 X 10 X 96” Long Forks- Hydraulic Riggers Boom- GM V8 350 cu in Dual Fuel- Allison Power Shift Trans- 3 Removable Counterweights- Base Weight 43,100 lbs

Wholesale Priced at $185,000 US Funds

1986 Gradall 552-3S- 20,000 lbs @ 24” LC- 3 Section Boom- 30” of Lift- QD Carriage w/ 60” Forks- Hook Block- Detroit 4-53 Diesel- 25,500 lbs



800.447.6901 www.mhnetwork.com Material Handling Network November13 A3

We cover 85% of the industrial truck population in1 day ground service with more than 6 million parts.

Get Parts Fast.

www.tvh.com | www.irmn.com

Follow us and check out our exclusive deals today.

A4 November13 Material Handling Network www.mhnetwork.com 800.447.6901

Documents

November 2013