EMPLOYEES’ STATE INSURANCE CORPORATION DENTAL COLLEGE & HOSPITAL Sector-15, Rohini, New Delhi – 110089.

Telefax: 011-27553099 Website: www.esic.nic.in

Notice inviting Tender (Retender) for Dental & Medical Equipments

and Instruments.

Sealed tenders under “Two Bid System”are invited by Medical Superintendent ESI Hospital Sector-15, Rohini, New Delhi -110089 for the supply of following equipments and instruments

required for ESIC Dental College & Hospital, Sector-15, Rohini, New Delhi– 110089.Following items are retendered. S.No. Name of Equipment Required

Quantity

Earnest Money Deposit (EMD)in (Rs.)

1. Needle burner with Syringe Cutter 07 Nos. 1750/-

2. Plaster dispenser 01 No. 2250/-

3. Pressure Molding machine

(for Pedodontics Deptt.)

01 No. 1750/-

4. Steam Cleaner 01 No. 6250/-

5. Extraction Forceps: Sets a)Lower Premolar Forceps b)Coup Land Straight shank elevator

04 No.

[Qty.05 Sets :

Grooved(5)+Non

Grooved(5)]

1000/-

6. Dewaxing Unit 01 No. 2250/-

7. Microsurveyor 01 No. 2000/-

8. Lab micromotor with heavy duty hand piece. 01 No. 2500/-

9. Spindle Grinder 01 No. 6000/-

10. Burnout Furnace 01 No. 11250/-

11. Sandblasting Machine 01 No. 7000/-

12. Pindex System 01 No. 6250/-

13. Circular Saw 01 No. 8500/-

14. Vacuum Mixer 01 No. 6500/-

15. Pneumatic Chisel 01 No. 3000/-

16. Gear Reduction Handpieces 03 No. 8250/-

17. Piezo Surgery Unit 01 No. 24250/-

18. Hand instruments (required for setting up Satellite Dental Clinic at ESI Dispensary, Narela ,Delhi )

As per details in the

specifications .

3550/-

Interested firms are requested to download the tender form with terms & conditions from Website- www.esic.nic.in . Separate bid has to be submitted for each item. Tender form is to be

submitted complete in all respects along with prescribed EMD in favour of “ESIC FUND ACCOUNT No.1” New Delhi in form of Demand Draft or Banker cheque only.

Tender complete in all respects must be deposited in tender box kept in the chamber of

Medical Officer In charge Room No.319, 3rd Floor, ESIC Dental College & Hospital, ESI Hospital Complex,Sector-15,Rohini, New Delhi-110089 up to 1.00 pm on 06-12-2013. Tender received late will not be entertained.

Tender will be opened on 06-12-2013 at 2.00 pm in the chamber of Medical Officer In charge Room No.319, 3rd Floor, ESIC Dental College & Hospital, ESI Hospital Complex, Sector-15,Rohini, New Delhi-110089 in the presence of bidders or their authorized representatives. If

due date of opening is declared holiday, tender will be opened on next working day at same time and place.

Medical Superintendent reserves the right to reject any tender or all without assigning any reason(s) thereof.

Medical Superintendent

EMPLOYEES’ STATE INSURANCE CORPORATION DENTAL COLLEGE & HOSPITAL Sector-15, Rohini, New Delhi – 110089.

Telefax: 011-27553099 Website: www.esic.nic.in

No.115/U/16/30/DC/Final Year/Phantom Heads and Final Year Equipments Dated: 05/11/13

Notice inviting Tender (Retender) for Dental & Medical Equipments

and Instruments.

Sealed tenders under “Two Bid system” are invited by Medical Superintendent ESI Hospital Sector-15, Rohini, New Delhi -110089 for the supply of following equipments and instruments required for ESIC

Dental College & Hospital, Sector-15, Rohini, New Delhi – 110089. Following items are retendered.

S.No. Name of Equipment Required

Quantity

Earnest Money Deposit (EMD)in (Rs.)

1. Needle burner with Syringe Cutter 07 Nos. 1750/-

2. Plaster dispenser 01 No. 2250/-

3. Pressure Molding machine

(for Pedodontics Deptt.)

01 No. 1750/-

4. Steam Cleaner 01 No. 6250/-

5. Extraction Forceps: Sets a)Lower Premolar Forceps b)Coup Land Straight shank elevator

04 No.

[Qty.05 Sets :

Grooved(5)+Non

Grooved(5)]

1000/-

6. Dewaxing Unit 01 No. 2250/-

7. Microsurveyor 01 No. 2000/-

8. Lab micromotor with heavy duty hand piece. 01 No. 2500/-

9. Spindle Grinder 01 No. 6000/-

10. Burnout Furnace 01 No. 11250/-

11. Sandblasting Machine 01 No. 7000/-

12. Pindex System 01 No. 6250/-

13. Circular Saw 01 No. 8500/-

14. Vacuum Mixer 01 No. 6500/-

15. Pneumatic Chisel 01 No. 3000/-

16. Gear Reduction Handpieces 03 No. 8250/-

17. Piezo Surgery Unit 01 No. 24250/-

18. Hand instruments (required for setting up Satellite Dental Clinic at ESI Dispensary, Narela ,Delhi )

As per details in the

specifications .

3550/-

Tenders complete in all respect, must be deposited in the office of the Medical Officer In charge Room

No.319, 3rd Floor, ESIC Dental College & Hospital, ESI Hospital Complex, Sector-15,Rohini, New Delhi-

110089 on or before from the date of opening up to 1.00 P.M. on 06-12-2013.

The tenders will be opened on the same day in the chamber of Medical Officer In charge Room

No.319, 3rd Floor, ESIC Dental College & Hospital, ESI Hospital Complex, Sector-15,Rohini, New Delhi-

110089 at 2.00 P.M. in the presence of tenderers or their representatives who may like to be present

on that day. In case date of opening of tender is declared as holiday tenders shall be received and

opened on next working day as per the above mentioned schedule.

The tender/s should be submitted in sealed envelope addressed to the Medical Superintendent, ESI Hospital, Rohini, sector 15, Delhi-110089, The envelope should be super-scribed as “Tender for

Equipment/Instrument (Serial Number & Name of equipment/instrument)” due on 06-12-2013, Medical Superintendent, ESI Hospital, sector 15, Rohini,Delhi-110089.

Tenderers are to submit two bids Viz. Techno-commercial Bid and Price Bid separately super-scribing

as “Tender for Equipment/Instrument (Name of equipment/Instrument) due on 06-12-2013 on first envelope and “Price Bid” for “Tender for Equipment/Instrument (Name of equipment/Instrument)

due on 06-12-2013 on the second envelope. Both the envelopes should have name of the company quoting the tender, Each and every page of the quotation should be separately numbered and duly signed. Both the envelopes are again to be sealed and put in a single envelope Super-scribing name of equipment/Instrument and name of company last date of submission of tender addressed to the Medical Superintendent, ESI Hospital, Rohini, sector 15, Delhi-110089.

The contents of Techno Commercial Bid should include following items:

1 Covering letter indicating the list of enclosures. 2 EMD in accordance with instructions as above. 3 Name and detailed specifications of the quoted Equipment/Instrument with price Blanked 4 Name and detailed specifications of essential accessories if any with price Blanked 5 Name and detailed specifications of optional accessories if any with price Blanked 6 Name and detailed specifications of the alternative Equipment with price Blanked 7 Warranty Offered…..Year/s (Minimum for Two Years) 8 Rates of AMC and CAMC minimum for 5 years after expiry of warranty. 9 Statement of deviation parameter wise from tendered commercial conditions, /specifications if

any. 10 Copy of latest PAN/TAN 11 Statement of deviation parameter wise from tendered conditions, if any. 12 Authority letter from manufacturer/ authorize distributor/ stockiest. 13 Users List. 14 Name and address of nearest authorized service center. 15 Catalogue of the equipment showing the make/model no and specifications. 16 Declaration/ undertaking on stamp paper as per the Performa enclosed.

The contents of Price Bid should include following items:

1. The information given at Techno commercial bid should be reproduced in price bid with prices indicated.

2. Rates should preferably be typed in words as well as in figures, free from erasing, cutting and over-writing.

3.Price quoted should match with the items quoted in technical bid.

4.Each and every page of the quotation be separately numbered and duly signed.

5.Only Techno-commercial bid (Un-Priced bid) will be opened first and shall be referred for the Technical Evaluation. The price bid of only those tenderers whose technical bid is found acceptable by the competent authority will be opened for further action.

6.In case the price quoted cannot be matched with the item/s quoted in technical bid the bid shall be liable to be rejected.

7.Rates and S.T./ VAT must be quoted separately .The price should be all inclusive lump sum price offered for each item including cost of the equipment, freight, insurance, transit insurance, packing forwarding etc. and including charges for installation and commissioning with all the men and material required for the same and included charges for the quoted warranty period.

8.The price should be on F.O.R. ESI Hospital, Rohini, Sector-15, Delhi-110089. No other charges in addition will be payable on any account over and above the lump sum price quoted in the price bid. The rates quoted in ambiguous terms such as “Freight on actual basis” or “Taxes as applicable extra” or “Packing forwarding extra” will render the bid liable to rejection.

9.The price should be quoted in I.N.R.

TERMS AND CONDITIONS GOVERNING CONTRACT FOR EQUIPMENTS:

1. The Tenderer must enclose a draft/banker Cheque for rupees mentioned against each items as earnest money drawn in the favor of “ESI Fund A/C No.1.”

2. EMD Deposited with earlier tender if any or in any other form as given, will not be adjusted/accepted against this tender. Tender without EMD will not be accepted in any case.

3. Tenderer will have to demonstrate the quoted item if required to Technical Evaluation Committee within the stipulated time frame as and when asked for or as has been mentioned in the tender. The tender shall be liable to be cancelled on non-compliance of this clause.

4. EMD will be released after finalization of tender to unsuccessful bidder/s. 5. Successful bidder has to deposit 10% of the total cost of equipment as performance security with

the Medical Superintendent in the form of Demand Draft/ Banker’s Cheque/ Bank guarantee else 10% of the payment due (Rounded-up) shall be with-held which will be released on satisfactory performance of the equipment after expiry of warranty.

6. The firm should undertake that the rates quoted are not the higher than quoted for any other govt. Institution / hospital in India.

7. The company will get only one chance for demo. In case the company fails to arrange the demo the tender shall liable to be cancelled.

8. The date for demonstration shall be fixed with mutual consent on telephone the same shall be confirmed in writing and by fax. In any case not more than two weeks time shall be given to arrange for demo.

9. In case demo of the equipment is required the same has to be arranged at Delhi or NCR. 10. Only the item/s of manufacturers or their authorized distributor/stockiest would be considered. 11. Tenderer must provide the telephone and fax no with tender for all correspondence. 12. The equipment should be guaranteed /warranted for a minimum period of two years or as

mentioned in specifications the date of satisfactory installation and inspection. 13. Delivery schedule: - Within 4 weeks after placement of supply order. 14. Firm should undertake to enter into Annual Maintenance Contract (AMC/CAMC) for equipment as

well as for accessories attached, for minimum period of five years after completion of warranty period and accordingly quote the rates of AMC for five years. The rates quoted should be both for Comprehensive AMC (CMC) as well Non Comprehensive AMC (AMC) for five years. Firm should undertake to keep the equipment in running order throughout the year and in case of equipment going out of order the fault will be attended within 24 hours of lodging the complaint.

15. Payment of equipment will be made within two weeks after the successful installation, training to user deptt. and satisfactory inspection of the equipment.

16. For the equipment where reagents, cartridge, consumables, etc. are required. The price bid must include: A) Rate list indicating the prices and packing prevalent on date of tendering, B) List indicating cost and life of consumables.

17. Photocopy of latest PAN Should be enclosed with the completed tender. 18. Tenderer if not a manufacturer, has to submit manufacturer’s authorization certificate . 19. No of installations, installations in local area, feed-back from them, proximity of service center,

quality of equipment, Duration of Warranty offered, rates of AMC/CAMC, modern technology, shall also be a criteria in making the decision.

20. Higher end model/additional feature may get preference. 21. In case the firm wants to visit the user dept. they can visit on working days during working hours

i.e. from 10:00 A.M. to 3:00 P.M.in order to find the suitability of place, availability of electronic points, water supply and to assess any other condition required for the equipment.

22. If any accessories like voltage stabilizer, water filtration/ purifier/ soften plant etc. are required with the equipment must be quoted with the equipment.

23. The Medical Superintendent has the right to accept or reject any or all the tenders without assigning any reason(s) thereof.

24. The Tenderer is required to submit undertakings as per the Performa enclosed on a non-judicial stamp paper of Rs.10/-

25. In a tender , either the Indian agent on behalf of the Principal/OEM or Principal / OEM itself can bid but both can not bid simultaneously for the same item/product in the same tender.

26. If an agent submits bid on behalf of the principal / OEM, the same agent shall not submit a bid on behalf of another Principal/OEM in the same tender for the same item/product.

Medical Superintendent

UNDERTAKING: (To be submitted in non judicial stamp paper of Rs. 10/=)

1 I,……(Name of authorized Signatory) the undersigned hereby declare and affirm that I have gone through the terms and conditions governing the tender and undertake to comply with all terms and conditions.

2 That the rates quoted by me are valid and binding upon me for the period validity of tender. 3 The rates quoted are not the higher than quoted for any other govt. Institution / hospital in

India. 4 That the earnest money of Rs._____________deposited by me vide Banker Cheque/Demand

Draft no.___________ Dt.___________drawn on…………..(Name of the Bank) is attached herewith.

5 That I/We authorize Medical superintendent to forfeit the earnest money deposited by me/us if any delay or failure to supply the article within the stipulated time and the items of desired/quoted quality.

6 That I will be in the position to provide Annual Maintenance Contract/Comprehensive Maintenance Contract (AMC/CMC), spare parts, accessories attached and its consumables for 5 years from the date of satisfactory installation of the equipment till the AMC/CMC period is over.

7 That there is no vigilance/CBI case or court case pending against the firm, debarring my firm to supply of items quoted.

8 That I hereby undertake to supply the items as per directions given in supply order within stipulated period.

9 That I undertake to maintain the equipment to the satisfaction of user during the period of warranty and guarantee.

10 I have been informed that the Medical Superintendent has the right to accept or reject any or all the tenders without assigning any reason thereof.

11 We (Name of firm) undertake that we will provide 3 (Three) preventive service on quarterly basis during the warranty and AMC/CMC period as offered in our tender and any no. of break down calls shall also be attended within 24 hrs. I also agree that the payment of AMC/CMC shall be made to me on quarterly basis after satisfactory preventive service.

Signature and address of the Tenderer

Performa Quotation

S.No. Particulars

1 Name of manufacturer and model quoted 2 Whether the equipment quoted meets all specifications

or not

3 Any deviation from tendered specifications 4 Additional features if any

5 Authority letter from manufacturer/ authorize distributor/ stockiest.

6 Nearest place for availability of after sales service

7 List of the installations provided or not 8 Relevant catalogues enclosed or not

9 Any deviation from terms and conditions of tender

10 Validity of tender (Minimum one year) 11 Declaration/ undertaking on stamp paper as per the

performa enclosed

12 Copy of latest PAN/TAN 13 Total cost of equipment including essential accessories Prices to be

blanked in techno commercial bid

Prices to be indicated only in price bid

14 Rates of Sales Tax/ VAT etc. chargeable on 10 above F.O.R.

DO DO

15 Warranty offered (minimum 24 months after successful installation and satisfactory inspection)

16 Rate of AMC year wise minimum for five years after expiry of warranty.

DO DO

17 Rate of CMC year wise minimum for five years after expiry of warranty.

DO DO

TENDER SPECIFICATIONS OF EQUIPMENTS AND INSTRUMENTS. Specifications of (Item No.1) Needle burner with Syringe Cutter.

Two in one electrical and manual Powder coated moulded body device

To be used both for syringes and needles Portable

Needle destruction above 900 °C Dual movable electrodes.

Container for Safe disposal of needles and syringes.

Sharp stainless steel scissors.

Safe and shock proof. Maitainance free

Provision for removable collection tray or box for refused needle and syringe barrel nozzles

Safety fuse

Power supply 220 V

Make: Indigenous/ Imported

Specifications of (Item No.2) Plaster Dispenser.

Should have a capacity of 20-30 kgs

Should be wall mounted

Should have a stainless steel body

Should have inside rubber container to prevent dispersion of dust in the environment

Plaster should be protected from humidity and other polluting elements

Should dispense plaster in dusty powder form

Digital electronic timer preferred

Source: Indigenous / Imported.

Specifications of (Item No.3) Pressure Moulding Machine

It should be equipped with heat insulating material and devices

It should have a timer to prevent overheating of heater

It should have fuse to prevent overload

It should have noise filter.

Power Supply: 110 or 220 V, 50/60 Hz

Heater Output: 550 W

Motor Output: 1250 W

It should have a CE certification.

It should be supplied with 100 sheets for fabrication of appliance

It should be able to fabricate Splint / ortho retainer, Surgical / implant stent, Temporary crown

& bridge form, Bleaching / fluoride tray and Night / mouth guard.

Source: Indigenous / Imported.

Specification of (Item No.4) Steam Cleaner

It should have all stainless steel/ Teflon coated tank with stainless steel fittings.

It should have external sight glass and protective cover, with ball check valves.

It should have stainless steel heating element for reduced sediment in vessel.

It should have water intake valve with back-up flow protection.

It should have insulated nozzle assembly.

It should have automatic shut-off - with low water light indicator.

It should have convenient foot pedal control for steam release.

It should be easy to plumb.

It should be with steam gun.

It should be easy to clean.

It should be able to remove Wax and plaster .

Warranty-It should have one year warranty. Source: Indigenous / Imported.

Specifications of (Item No.5) Extraction Forceps: Sets

(a)Lower Premolar Forceps (Qty.:4 Nos.)

-High Quality ,Non corrosive stainless steel.

-British Pattern.

Source: Indigenous / Imported.

(b)Coup Land Straight shank elevator [Qty.05 Sets : Grooved(5)+Non Grooved(5)]

-High Quality ,Non corrosive stainless steel.

-Grooved and non grooved blades.

Source: Indigenous / Imported.

Specifications of (Item No.6) Dewaxing Unit -Double walled, outer and inner wall made up of stainless steel 304 grade.

-The gap between the walls is filled with glass wool to minimize loss of temperature.

-Temperature is controlled by hydraulic thermostat from 5 degree Celsius above ambient to

100 degree Celsius with a sensitivity of +/-5 degree Celsius bath consists Mechanical timer can

be set ½ hour to 2 hour. Inner working size 260x230x330mm to 330x280x380mm.

-To work on 220/230 volts AC

-corrosion resistant.

-Make: Indigenous/Imported

Specifications of (Item No.7) Microsurveyor

Dimensions : Length 100m.m. X width 80m.m. X Height 200 m.m. to Length 120m.m. X width

110m.m. X Height 250 m.m.

Weight: 350 gms. To 500 gms.

-should have compact design and portability.

-should be useful for patient consultation and explanation of treatment.

-Should have freely adjustable points and easily readable scale lines.

-should come with all the attachments.

Make: Indigenous/imported

Specifications of (Item No.8) Lab micromotor with heavy duty hand piece

Should be powerful and have stable torque.

Hand piece should be easy to handle, lightweight and precise in function.

Should have dust free mechanism for high durability.

Noise should be minimal and vibrations least.

Should not get heated after long hours of working.

Should not have any play in the hand piece.

Should have increased chuck strength for working on various materials.

Speed 1000-50,000 rpm/min, variable speed control.

Should have sufficient length.

Should have a straight hand piece.

CONTROL UNIT

Speed 1000- 50,000/min.

Should have Hand as well as Foot Control.

Easy to operate display panel and user friendly design.

Audible function check.

Digital speed display.

Error code display function.

Voltage 220V to 240V.

HANDPIECE

Should have high torque.

Should be Heavy Duty.

Weight should not be more than 300 g.

Minimum one year warranty on hand piece from original manufacturer.

Make: Indigenous/imported

Specifications of (Item No.09) Spindle Grinder.

(Spindle grinder with dust collector)

High speed alloy grinder

Adjustable spindle working height with automatic spindle- 220 V, 50-60 Hz

Approximate measurements:

o Width= 10.25 inch ( 260 mm)

o Length= 11.75 inch ( 298 mm)

o Height= 11.00 inch ( 279 mm)

o Weight= 29- 31 lb

Grinder variable speed control – 24,000-27,000 rpm

Heavy duty ¼ HP capacitor start motor in totally enclosed housing

Power output connection for automatic on/off dust collector with vacuum suction

Suction port for connection to dust collector

Should be provided with a compatible dust collector:

o Should be quiet (59 dB noise level), compact and portable

o One HP motor, approx 112 cubic feet per minute suction power

o Filter to retain large and fine dust particles ensuring long life of the motor

Make: Indigenous/imported

Specifications of (Item No.10) Burnout Furnace

Maximum temperature provided should be approx 1200 degree Celsius and working

temp of 1150 degrees Celsius.

Should have multi stage programmable feature, an electronic microswitch, digital

display cum controller

Temperature control with electronic microprocessor which allows

o setting of temperature,

o maintenance time,

o speed at which temperature rises.

High protection against corrosion

Internal chamber size : Approx 550 cubic inches

Fork/forceps for placement and removal of ring

Make: Indigenous/imported

Specifications of (Item No.11) Sandblasting Machine

Should have twin pen sandblaster with different nozzle sizes and minimum two tanks of

approx 0.5 L-1 L each to be used for alumina from 50-250 microns.

Highly durable long lasting blasting tips of 2 sizes

Should have atleast two carbide tips for micro sandblasting

Sand recycling system

Adjustable pressure with pressure regulator

Should have atleast two airpressure controllers

Should have excellent visibility and lighting inside the chamber with protective shield

It can be attached with vacuum

Should have pneumatic foot control

Prefitted for connection to suction system/ extractor

Should have airgun

Should be supplied with compatible suction system for sand blaster

o Compact

o Reasonable suction volume

Should be provided with compatible compressor

o 100 % continuous operation possible

o Low noise levels between 50-60 dB (A)

o Moisture draining facility

o Compressor should have facility of automatic switch on and off according to

demand

o 20 L tank capacity with air output 60-70L/min

o Small size and should have wheels for easy movement

Make: Indigenous/imported Specifications of (Item No.12) Pindex System

Laser beam indicator for accurate pin hole location

Should have precision pinhole drilling unit. Drill should automatically penetrate to exact

depth.

Adjustable working position

Design should be ergonomic for both sitting and standing operators

Comprise of high speed motor for use of pindex drill bur

Make: Indigenous/imported

Specifications of (Item No.13) Circular Saw

Unit for cutting of dies

Machine that causes the disk to spin with adjustable model holder

Circular saw comprising of metal disc or blade with saw teeth on edge

Approximate dimension of saw = 75mm x .25mm

Saw blade of stainless steel

Approximate rotational speed range = 3500-5000 rpm

Internal suction system

Inbuilt electromagnet

Dual security

Dust filter

Make: Indigenous/imported

Specifications of (Item No.14) Vacuum Mixer

It should provide in vacuum paddle mixing of coatings, investments, plasters and

alginates for dental use.

Digital electonic control with microprocessor and LCD alpha numeric display

Programmable with respect to

Spatulation time

Spatulation speed between 100-500 rpm

Pre insertion vacuum

interval time allowing spatulation direction rotation change

Should have in built oil free vacuum pump.

Electronic vacuum control. Maximum vacuum should be approx 740 mmHg

Standard cup capacity of 500 cc

Should have air filter

Weight should not exceed 11 kgs.

Power supply : 230 V 50/60 Hz

Accessories: Additional size/ sizes of cups for mixing

Make: Indigenous/imported

Specifications of (Item No.15) Pneumatic Chisel

(Pneumatic chisel with compressor)

Stainless steel body with automatic oil feeder and provision of controlling incision

power by handpiece.

Air pressure maximum upto 5/6 bar

Air consumption 40-50 lt/min.

Noise level should not exceed 78 dB (A).

Should be provided with a compatible compressor having following features:

o 100 % continuous operation possible

o Low noise levels between 50-60 dB (A)

o Moisture draining facility

o Compressor should have facility of automatic switch on and off according to

demand

o 20 L tank capacity with air output 60-70L/min

o Compact and should have wheels for easy movement

Source: Indigenous / Imported.

SPECIFICATIONS OF (ITEM NO.16) GEAR REDUCTION HANDPIECES

1) Should have standard E Type attachment compatible to any type of pneumatic and

electrical motors.

2) Should be 1:128 reducing handpiece.

3) Should have a microhead offering maximum visibility and accessibility in the posterior

regions.

4) Should have an adjustment ring to allow precise torque control preferably provide four

torque levels.

5) Should have a push button head and be applicable to standard rotary Ni Ti file systems.

6) Should be light weight and autoclavable.

7) Should provide automated declutching to avoid breakage of file.

Specifications of (Item No.17) Piezo Surgery Unit. Piezo surgery unit comprising of:

Piezo surgery hand piece with LED light,

Bone surgery tips-5

Extra sinus surgery tips-5

Non invasive sinus tips with hydraulic pressure-5

Touch screen function,

Extraction tip (fibrotomy)

Peristaltic pumps-2

Multifunctional foot switch

Autoclavable tubings for irrigation

Source- indigenous/ imported

Accessories: Five Autoclavable Tubes for irrigation.

Specifications of (Item No.18) Hand instruments

INSTRUMENT SPECIFICATION No. of

Units

Mouth mirror Light weight, high quality stainless steel,rust proof 10

Straight probe Light weight, high quality stainless steel, rust proof 10

Tweezer Light weight, high quality stainless steel, rust proof 10

Bur box Metallic for placement of minimum of 10 air rotor burs 2

Spoon excavator

(small)

Small size, Light weight, high quality stainless steel, rust

proof,double ended

2

Spoon excavator

(large)

Large size, Light weight, high quality stainless steel, rust

proof,double ended

2

Condensers (small) Small size, Light weight, high quality stainless steel, rust

proof, double ended

2

Condensers (large) Large size, Light weight, high quality stainless steel, rust

proof, double ended

2

Diamond carver For amalgam, Light weight, high quality stainless steel, rust

proof, with durable steel tip and thin blade

2 units

each

Hollenback Light weight, high quality stainless steel, rust proof, sharp

blade

Cement carrier Light weight, high quality stainless steel, rust proof

Ball burnisher (small) Small size, Round shape, Light weight, high quality stainless

steel, rust proof

Ball burnisher (large) Large size, Round shape, Light weight, high quality stainless

steel, rust proof

Mixing spatula Plastic, thin blade

Mixing spatula Light weight, high quality stainless steel, rust proof, double

ended for mixing cement

Plastic filling

instruments

Thin and narrow blade instrument, Light weight, high quality

stainless steel, rust proof

Composite filling

instruments (set of 6)

Teflon coated, light weight

Ivory no. 1 Retainer Adult size,High quality stainless steel, rust proof, with matrix

bands

Ivory no. 1 Retainer Pediatric size High quality stainless steel, rust proof, with

matrix bands

Ivory no. 8 Retainers High quality rust proof Stainless steel

Tofflemeir retainer High quality stainless steel, rust proof

Extraction Forceps

(Adult ).

Set of 14 forceps with two straight elevators ,Light weight

with durable steel tip

2 sets

Extraction Forceps

(Pediatric).

Set of 07 forceps with one straight elevator, Light weight

with durable steel tip.

2 sets

Elevators

1) Warwick James

2) Straight

elevator

light weight, Rust resistant, Made of German Stainless steel

2

2

Bone Rongeurs 5 mm tip, Light weight, high quality stainless steel, rust

proof

2

Bone file

Double ended, Light weight, high quality stainless steel, rust

proof

2

Suture cutting scissor Size medium, Sharp edges, with fine tip, Light weight, high

quality stainless steel, rust proof

2

Sickle scaler Double ended, high quality stainless steel, rust proof,

medium size, sharp blade

2

Posterior sickle Double ended, high quality stainless steel, rust proof, small

sized blade

2

Universal scaler High quality stainless steel, rust proof, sharp blade 2

Williams Probe Single ended, Stainless steel, Graduated with 1-10 marking

with 4 and 6 missing

2

Probe-Graduated –

CPITN/ WHO single ended , Clinical type- with markings till 11.5mm 10

Needle Holders Size - 6”, Good quality rust proof steel, with locking system

and small & thin beaks

2

Surgical Kidney

instruments tray

(Shallow type)

Size 8” 4

Surgical Kidney

instruments tray

(Shallow type)

Size – 10” 2

All items should be Autoclavable and rust proof.

Source : Imported / indigenous