Nortel IP phone 1230_user_guide_.pdf

7/30/2019 Nortel IP phone 1230_user_guide_.pdf

1/166

Nortel Communication Server 1000

Nortel IP Phone 1230User Guide

Title page


2/166


3/166

Revision history

3

Revision history

April 2008Standard 01.09. This document is up-issued to support NortelCommunication Server 1000 Release 5.5.

April 2008

Standard 01.08. This document is up-issued to support NortelCommunication Server 1000 Release 5.5.

March 2008

Standard 01.07. This document is up-issued to support NortelCommunication Server 1000 Release 5.5 and to contain updates to thelinks in the document.

February 2008

Standard 01.06. This document is up-issued to support Nortel

Communication Server 1000 Release 5.5 and to contain updates to theimages.

January 2008

Standard 01.05. This document is up-issued to support NortelCommunication Server 1000 Release 5.5 and to contain updates to thedocument.

December 2007Standard 01.04. This document is up-issued to support NortelCommunication Server 1000 Release 5.5 and to contain updates to thedocument.

December 2007

Standard 01.03. This document is up-issued to support NortelCommunication Server 1000 Release 5.5 and to contain description of

the Copy key.


4/166

Revision history

4

December 2007

Standard 01.02. This document is up-issued to support NortelCommunication Server 1000 Release 5.5 and to reflect changes to the

images.

December 2007

Standard 01.01. This document is issued to support NortelCommunication Server 1000 Release 5.5.


5/166

Contents

5

Contents

Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Feature overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Regulatory and safety information . . . . . . . . . . . . . . . . . . . 13

DenAn regulatory notice for Japan . . . . . . . . . . . . . . . . . . . . 20

How to get help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Using your IP Phone 1230 . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

IP Phone 1230 controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

IP Phone 1230 display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Call features and Flexible Feature Codes . . . . . . . . . . . . . . . 32

Installing your IP Phone 1230 . . . . . . . . . . . . . . . . . . . . . . . 33

Attaching the foot stand (optional) . . . . . . . . . . . . . . . . . . . . . 35

Connecting the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Connecting the headset (optional) . . . . . . . . . . . . . . . . . . . . . 35

Connecting the power (optional) . . . . . . . . . . . . . . . . . . . . . . . 36Connecting the LAN Ethernet cable . . . . . . . . . . . . . . . . . . . . 37

Connecting the PC Ethernet cable . . . . . . . . . . . . . . . . . . . . . 37

Wall-mounting the IP Phone (optional) . . . . . . . . . . . . . . . . . . 38

Customizing your IP Phone 1230basic features . . . . . . 39

Telephone Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Adjusting volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Adjusting the display screen contrast . . . . . . . . . . . . . . . . . . . 43

Selecting a language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44


6/166

Contents

6

Selecting date and time format . . . . . . . . . . . . . . . . . . . . . . . . 45

Accessing display diagnostics . . . . . . . . . . . . . . . . . . . . . . . . 45

Selecting a local dialpad tone . . . . . . . . . . . . . . . . . . . . . . . . . 46

Viewing IP Phone information . . . . . . . . . . . . . . . . . . . . . . . . 47

Performing diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Configuring Call Log Options . . . . . . . . . . . . . . . . . . . . . . . . . 49

Selecting a ring type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Enabling or disabling Call Timer . . . . . . . . . . . . . . . . . . . . . . . 56

Enabling OnHook Default Path . . . . . . . . . . . . . . . . . . . . . . . . 57

Changing feature key labels . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Configuring the name display format . . . . . . . . . . . . . . . . . . . 59

Configuring Live Dialpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Customizing your IP Phone 1230advanced features . . . 62

Managing your Station Control Password . . . . . . . . . . . . . . . 63

Configuring an Electronic Lock on your IP Phone . . . . . . . . . 65

Customizing the Personal Directory . . . . . . . . . . . . . . . . . . . . 67

Configuring the Local Tools menu . . . . . . . . . . . . . . . . . . . . . 72

Using Virtual Office . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Operating your IP Phone 1230 . . . . . . . . . . . . . . . . . . . . . . 82

Entering and editing text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Managing calls while not on a call . . . . . . . . . . . . . . . . . . . . 102

Managing calls during a call . . . . . . . . . . . . . . . . . . . . . . . . . 105

Managing calls while away from your desk . . . . . . . . . . . . . 114

Managing multiparty calls . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

Managing calls while busy at work . . . . . . . . . . . . . . . . . . . . 124


7/166

Contents

7

Hotel applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

Paging Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

Call Override features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

Using Centrex services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Miscellaneous call features . . . . . . . . . . . . . . . . . . . . . . . . . 141

Troubleshooting your IP Phone 1230 . . . . . . . . . . . . . . . . 148

Virtual Office . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148

Flexible Feature Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

IP Phone 1200 LCD Expansion Module . . . . . . . . . . . . . . 154

Basic features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154

Keys and descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155

Terms you should know . . . . . . . . . . . . . . . . . . . . . . . . . . 157

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161


8/166

Contents

8


9/166

Welcome

9

Welcome

Your IP Phone 1230 brings voice and data to your desktop. The IP Phone1230 can directly connect to a Local Area Network (LAN) through anEthernet connection.

This guide contains the following topics:

Using your IP Phone 1230 on page 25

Installing your IP Phone 1230 on page 33

Customizing your IP Phone 1230basic features on page 39 Customizing your IP Phone 1230advanced features on page 62

Operating your IP Phone 1230 on page 82

Troubleshooting your IP Phone 1230 on page 148

IP Phone 1200 LCD Expansion Module on page 154

In this guide, self-labeled line or programmable feature key labels are

displayed beside the keys, and context-sensitive soft key labels aredisplayed directly above the keys.

Figure 1 on page 9 shows the key labels.

Figure 1: Programmable feature keys and context-sensitivesoft keys


10/166

Welcome

10

Feature overview

Your IP Phone 1230 supports the following features:

four context-sensitive soft keys (self-labeled)

Note: Context-sensitive soft keys are Nortel Communication Serverdependent. Some IP Phones are not configured to support context-sensitive soft key functionality. Contact your system administrator forfurther details.

six specialized fixed keys

- Quit

- Directory

- Message (Inbox)

- Redial

- Services

- Conference

six fixed call-processing keys- Mute

- Handsfree

- Goodbye

- Applications

- Headset

- Hold

wall-mountable

LCD display screen

high-quality speaker phone

volume control keys to adjust the ringer, speaker, handset, andheadset volume

hearing aid compatibility

Second Page Functionality to access a second page of features using

the left and right keys

20 programmable feature keys:

- ten keys for user-defined feature key labels


11/166

Welcome

11

- ten lines/features you can access through Second PageFunctionality

headset jack

handset jack 10/100 Ethernet ports

- one Ethernet port for LAN connection

- one Ethernet port for optional PC connection

Power over Ethernet (PoE) or power through a supported AC adapter

support to Network Diagnostic Utility

Accessory Expansion Module (AEM) port to connect the Expansion

Module

Figure 1 on page 9 shows the IP Phone 1230.


12/166

Welcome

12

Figure 2: IP Phone 1230


13/166

Regulatory and safety information

13

Regulatory and safetyinformation

This equipment has been tested and complies with the limits for a Class Bdigital device, pursuant to part 15 of the FCC Rules. These limits providereasonable protection against harmful interference in a residentialinstallation.

This equipment generates, uses, and can radiate radio frequency energyand, if not installed and used according to the instructions, can causeharmful interference to radio communications. However, there is noguarantee that interference cannot occur in a particular installation. If thisequipment causes harmful interference to radio or television reception,which you can determine by turning the equipment off and on, you areencouraged to try to correct the interference by performing one or more ofthe following measures:

Reorient or relocate the receiving antenna.

Increase the distance between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.

Consult the dealer or an experienced technician for help.

This Class B digital apparatus complies with Canadian ICES-003. Cetappareil numrique de la classe B est conforme la norme NMB-003 du

Canada.

Warnings

This is a Class B product. In a domestic environment this product cancause radio interference; in which case, you must take adequatemeasures.

Operation is subject to the following two conditions: (1) this devicecannot cause interference, and (2) this device must accept

interference, including interference that can cause undesiredoperation of the device.


14/166


14

Other Safety Approvals: IEC 60950-1: ITE equipment - Safety - Part 1: General

requirements

Table 1 on page 14 shows the EMC compliance for various jurisdictions

Jurisdiction Standard Description

United States UL 60950-1 ITE equipment - Safety - Part 1:General requirements

Canada CSA 60950-1-03 ITE equipment - Safety - Part 1:General requirements

EuropeanCommunity

EN 60950-1+A11

ITE equipment - Safety - Part 1:General requirements

Australia/NewZealand

AS/NZS60950.1:2003

Safety of InformationTechnology Equipment

Table 1: EMC compliance for various jurisdictions (Part 1 of 2)

Jurisdict ion Standard Description

UnitedStates

FCC CFR 47Part 15

Class B Emissions: FCC Rules forRadio Frequency Devices

Canada ICES-003 Class B Emissions: Interference-Causing Equipment Standard:Digital Apparatus

Australia/New Zealand

CISPR 22 Class B Emissions: Informationtechnology equipment - Radiodisturbance


15/166


15

Table 2 on page 15 shows the Safety compliance for various jurisdictions.

EuropeanCommunity

EN 55022 Class B Emissions: Informationtechnology equipment - Radiodisturbance

EN 55024 Information technology equipment- Immunity characteristics

Limits and methods ofmeasurement

EN 61000-3-2 Limits for harmonic currentemissions (equipment inputcurrent


16/166


16

Other Safety Approvals: IEC 60950-1: ITE equipment - Safety - Part 1:General requirements.

Other

US/Canada: Hearing Aid Compatibility (HAC) as per FCC Part 68

This equipment complies with the CE Marking requirements.

Australia: AS/ACIF S004:Voice Frequency Performance Requirementsfor Customer Equipment

EU Countries: This device complies with the essential requirements andother relevant provisions of Directive 1999/5/EC. You can obtain a copyof the Declaration from www.nortel.com/corporate/community/environment/life_cycle/declarations.html or Nortel Networks GmbHaddress: Ingolstaedter Strasse 14-18, 80807 Munich Germany.

Table 3 on page 16 lists EMC compliance for various jurisdictions

Canada CSA 60950-1-03 Safety of Information TechnologyEquipment

EuropeanCommunity

EN 60950-1 ITE equipment - Safety - Part 1:General requirements

Australia/New Zealand

AS/NZS60950.1:2003

Safety of Information TechnologyEquipment

Table 3: EMC compliance (Part 1 of 2)


United States FCC CFR 47Part 15

Class A Emissions: FCC Rules forRadio Frequency Devices (seeNotes 1 and 2)

Table 2: Safety compliance for various jurisdictions(Part 2 of 2)

http://www.nortel.com/corporate/community/environment/life_cycle/declarations.htmlhttp://www.nortel.com/corporate/community/environment/life_cycle/declarations.htmlhttp://www.nortel.com/corporate/community/environment/life_cycle/declarations.htmlhttp://www.nortel.com/corporate/community/environment/life_cycle/declarations.html


17/166


17

Note 1: This equipment has been tested and found to comply with thelimits for a Class A digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protectionagainst harmful interference when the equipment is operated in acommercial environment. This equipment generates, uses, and canradiate radio frequency energy and, if not installed and used inaccordance with the instruction manual, may cause harmfulinterference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which case

Canada ICES-003 Class A Emissions: Interference-Causing Equipment Standard:Digital Apparatus


AS/NZS 3548CISPR 22

Class A Emissions: Informationtechnology equipment - Radiodisturbance

EuropeanCommunity

EN 55022 Class A Emissions: Informationtechnology equipment - Radiodisturbance

EN 55024 Information technology equipment -Immunity characteristicsLimits and methods ofmeasurement

EN 61000-3-2 Limits for harmonic currentemissions (equipment input current


18/166


18

the user will be required to correct the interference at his ownexpense.

The user should not make changes or modifications not expresslyapproved by Nortel Networks. Any such changes could void theusers authority to operate the equipment

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.

Consult the dealer or an experienced radio/ TV technician for help.Note 2: The user should not make changes or modifications notexpressly approved by Nortel Networks. Any such changes couldvoid the users authority to operate the equipment

This Class A digital apparatus complies with Canadian ICES-003. Cetappareil numrique de la classe A est conforme la norme NMB-003 duCanada

Warnings:

This is a Class A product. In a domestic environment this product cancause radio interference in which case the user must take adequatemeasures.

Operation is subject to the following two conditions: (1) this devicemay not cause interference, and (2) this device must accept any

interference, including interference that may cause undesiredoperation of the device.

Privacy of communications may not be ensured when using thistelephone.

Use the following procedure to prevent radio interference to thelicensed service, this device must be operated indoors only andshould be kept away from windows to provide maximum shielding.

Table 4: Safety standards


United States UL 60950-1 ITE equipment - Safety - Part 1:General requirements


19/166


19

Other

US/Canada: Hearing Aid Compatibility (HAC) as per FCC Part 68This equipment complies with the CE Marking requirements.

EU Countries: This device complies with the essential requirements andother relevant provisions of Directive 1999/5/EC. A copy of theDeclaration may be obtained from Nortel Networks GmbH address:Ingolstaedter Strasse 14-18, 80807 Munich Germany

Canada CSA 60950-1-03 ITE equipment - Safety - Part 1:General requirements

EuropeanCommunity

EN 60950-1 +A11 ITE equipment - Safety - Part 1:General requirements


AS/NZS60950.1:2003

Safety of Information TechnologyEquipment

Table 4: Safety standards



20/166


20

DenAn regulatory notice for Japan

Connecting Power

Use only Nortel-approved Limited Power Source 48 VDC 520 mA (FSPGroup Inc. Model: FSP025-1AD207A) with the IP Phone.

Connecting to the Local Area Network

Severe damage to your IP Phone can occur if you plug the phone into anISDN connection. Consult your system administrator to ensure you plugyour IP Phone 1230 into a 10/100 BaseT Ethernet jack.

Operation

The earpiece and mouthpiece of the handset can attract and retain smallobjects.


21/166


21

Location

Nortel recommends that you install your IP Phone 1230 away from directsunlight.


22/166

How to get help

22

How to get help

This section explains how to get help for Nortel products and services.

Getting Help from the Nortel Web site

The best way to get technical support for Nortel products is from theNortel Technical Support Web site:

www.nortel.com/support

This site provides quick access to software, documentation, bulletins, andtools to address issues with Nortel products. From this site, you can:

download software, documentation, and product bulletins

search the Technical Support Web site and the Nortel KnowledgeBase for answers to technical issues

sign up for automatic notification of new software and documentationfor Nortel equipment

open and manage technical support cases

Getting Help over thephone from a Nortel SolutionsCenter

If you do not find the required information on the Nortel Technical SupportWeb site, and you have a Nortel support contract, you can obtain helpover the telephone from a Nortel Solutions Center.

In North America, call 1-800-4NORTEL (1-800-466-7835).

Outside North America, go to the following web site to obtain thetelephone number for your region:

www.nortel.com/callus

Getting Help from a specialist by using an Express Routing

CodeTo access some Nortel Technical Solutions Centers, you can use anExpress Routing Code (ERC) to quickly route your call to a specialist inyour Nortel product or service. To locate the ERC for your product orservice, go to
http://www.nortel.com/supporthttp://www.nortel.com/callushttp://www.nortel.com/supporthttp://www.nortel.com/callus


23/166

How to get help

23

www.nortel.com/erc

Getting Help through a Nortel distributor or reseller

If you purchased a service contract for your Nortel product from adistributor or an authorized reseller, contact the technical support staff ofthe distributor or reseller.
http://www.nortel.com/erchttp://www.nortel.com/erc


24/166

How to get help

24


25/166

Using your IP Phone 1230

25


After you familiarize yourself with the IP Phone 1230 features, you canstart to use the IP Phone. This section describes how to use the IP Phone1230.

Getting started

The following section introduces the important details of the IP Phone

1230. Carefully read every section before you operate the new IP Phone1230.

Before you begin on page 25

IP Phone 1230 controls on page 26

IP Phone 1230 display on page 31

Installing your IP Phone 1230 on page 33

Before you begin

Take the appropriate precautionary measures before you connect the IPPhone 1230.

CAUTION

Consult your system administrator to

ensure that you plug your IP Phone into a10/100BaseT Ethernet jack. To avoidsevere damage to your IP Phone, do notplug your IP Phone 1230 into a regularphone jack.

CAUTION

Use your IP Phone 1230 only in an indoorenvironment.


26/166


26

IP Phone 1230 controls

This section describes the controls on the IP Phone 1230. Depending on

your geographic region, the IP Phone 1230 includes key caps withEnglish text labels. In this document, text in parentheses indicates thelabels that appear on the key caps; for example, (Services).

Context-sensitive soft keys are below theLCD. The soft key label is dynamic anddepends on the active feature. The label

length is a maximum of six characters.

A triangle before a soft key label, indicatesthe feature is active.

Press the More key to access the next layerof context-sensitive soft keys (self-labeled).

The ten keys on either side of the LCD areself-labeled line orprogrammable featurekeys, with labels on the LCD. These keysalso function as line (DN) keys. Press theLeft orRight arrow keys to access thesecond page of feature keys. This feature iscalled Second Page Functionality.

A steadily lit icon beside a line (DN) keyindicates the line is active. A flashing iconindicates the line is on hold. When a callarrives on a DN key which is not on thecurrently displayed page of keys, the IPPhone automatically displays the page withthe active key.

Fwd..

Fwd

ore..


27/166


27

A steadily lit icon beside a feature keyindicates the feature is active. A flashing iconindicates the feature is being programmed.When a call arrives on a feature key that isnot on the currently displayed page of keys,the IP Phone automatically displays the pagewith the active key.

Use the Volume control buttons to adjustthe volume of the ringer, handset, headset,

speaker, and Handsfree features. Press theupper button to increase the volume, andpress the lower button to decrease thevolume.

Press the Mutekey to listen to the callingparty without transmitting voice from your IP

Phone. Press the Mute key again to return toa two-way conversation. Mute keyfunctionality applies to handsfree, handset,and headset modes.

The Mute indicator LED, embedded in theMute key, flashes to indicate that you havemuted the sound.

Press the Handsfree key to activatehandsfree mode.

Note: The Handsfree LED indicator, on theHandsfree key, lights to indicate thatHandsfree is in use.

(Volume +)

(Volume -)

(Mute)

(Handsfree)


28/166


28

Use the Navigation keys to scroll throughmenus and lists that appear on the LCDscreen. The outer part of this key cluster isused for up, down, left, and rightmovements.

Use the Up and Down keys to scroll up anddown the menu, and the Left and Right keysto position the cursor. In some dialog boxesthat appear on your IP Phone, you can alsouse the Left and Right keys to select

editable fields. Press the Right key to selectthe field below the current selection, or theLeft key to select the field above the currentselection.

Press the Enterkey, at the center of thenavigation key cluster, to confirm menuselections.

In most menus, you can use the Enterkeyinstead of the Select orOK soft key.

Press the Hold key to place an active call onhold. Press the Hold key again or press theflashing line(DN) key to return to the calleron hold.

Press theApplications key to accessexternal server applications.

(Hold)

(Applications)


29/166


29

Press the Headset key to answer a callusing the headset or to switch a call from thehandset or handsfree to the headset.

The Headset LED indicator, embedded inthe Headset key, lights to indicate that theheadset is in use.

Press the Goodbye key to end an activecall.

When a message is waiting, or there is anincoming call, the red MessageWaiting\Incoming Call IndicatorLED atthe top center of the IP Phone flashes. Theflash cadence for each alert is different.

Press the Conference key to initiateconference.

Press the Quit key to exit an active menu ordialog box. The status of the active callremains unaffected if you press the Quit key.

Press the Redial key to access the rediallist.

Press theMessage key to access your voicemailbox when the message waiting indicator

flashes.

(Headset)

(Goodbye)

(Quit)


30/166


30

Press the Directory keyto access directoryservices.

Press the Services key and use thenavigation keys to access the followingitems:

Telephone Options

Volume adjustment

Contrast adjustment

Language

Date/Time

Display diagnostics

Local dialpad tone

Telephone Information

Diagnostics

Call Log Options

Ring type

Call Timer

On-hook default path

Change Feature Key Label

Name Display Format

Live Dialpad

Password Admin

Station Control Password

(Directory)

(Services)


31/166


31

IP Phone 1230 display

Your IP Phone 1230 display is divided into three sections:

Ten user-defined feature key labels appear on the upper section.

Single-line information for items such as Date and Time, Calling Party

Information, Feature Status Information, Options Information, andDirectory Information appear in the middle section.

The lower display area provides labels for the four context-sensitivesoft keys.

Note: The Password Admin menu isnot available on all IP Phone 1230phones. Consult your systemadministrator.

Display Network Diagnostics Utilities

Only your system administratoror service provider can use DisplayNetwork Diagnostics Utilities to performInternet diagnostics.

Virtual Office Login and Virtual Office

Logout (if Virtual Office is configured)

Press the Services key twice to access theLocal Tools menu, and use the Navigation keys to access the following items:

Preferences

Local Diagnostics

Network Configuration

Lock Menu

If you attempt to access the Local Toolsmenu and a dialog box appears that promptsyou for a password, contact your systemadministrator.

(Services)(continued)


32/166


32

Figure 3 on page 32 shows the IP Phone 1230 LCD screen

Figure 3: IP Phone 1230 LCD screen

Call features and Flexible Feature Codes

Some features are not available on all telephones. Call features andFlexible Feature Codes (FFCs) must be assigned to your telephone andsupported by system software. Contact your system administrator toconfigure these features and codes on your telephone.

Use Table 11 on page 151 to record the FFCs that your systemadministrator assigns to your phone.


33/166

Installing your IP Phone 1230

33


This section details the steps and precautionary measures to performduring IP Phone installation. The standard IP Phone 1230 packageincludes the following accessories:

foot stand

handset

handset cord

2.1 m (7 ft.) CAT5 Ethernet cable

number plate and lens

Figure 4 on page 34 displays the connections on an IP Phone 1230.

CAUTION

Ensure that the protective rubber cap onthe Accessory Expansion Module (AEM)port is in place when the port is not in use.

An improper connector can damage the IP

Phone. Consult your system administratorfor additional details.


34/166


34

Figure 4: Connections on the IP Phone 1230

Perform the following steps to connect the components of the phone and

to install the phone.

Attaching the foot stand (optional) on page 35

Connecting the handset on page 35

Connecting the headset (optional) on page 35

Connecting the power (optional) on page 36

Connecting the LAN Ethernet cable on page 37

Connecting the PC Ethernet cable on page 37 Wall-mounting the IP Phone (optional) on page 38


35/166


35

Attaching the foot stand (optional)

Attach the foot stand in the appropriate slots, depending on the desired

angle for your IP Phone. If you insert the foot stand into the upper slots,your IP Phone sits at a 25-degree angle. If you insert the foot stand intothe lower slots, your IP Phone sits at a 55-degree angle.

If you install your IP Phone on a wall, do not attach the foot stand.

1. Align the bottom tabs on the foot stand with the position 1 slots or theposition 2 slots on the back of your IP Phone.

In position 1 the IP Phone sits at a 25-degree angle.In position 2 the IP Phone sits at a 55-degree angle.

Figure 4 on page 34 shows the slots on the back of the IP Phone.

2. Press the foot stand into the slots until it snaps into place.

Connecting the handset

Use the following procedure to connect the handset to the IP Phone 1230.

1. Plug the end of the handset cord with the short straight section intothe handset.

2. Plug the other end of the handset cord with the long straight sectioninto the handset jack marked with the + symbol on the back of the IP

Phone.3. (Optional) Thread the cord through the channel in the foot stand (if

installed) so that it exits on the side of the foot stand.

Figure 4 on page 34 shows the connections on the back of theIP Phone 1230.

Connecting the headset (optional)

If you have a headset, you can connect the headset to theIP Phone 1230. For information on how to use your headset with your IPPhone, refer to Using a headset on page 91.


36/166


36

1. Plug the headset cord into the headset jack on the back of theIP Phone 1230 marked with the) symbol.

Figure 4 on page 34 shows the connections on the back of the

IP Phone 1230.

2. Thread the cord through the channel in the side of the foot stand.

3. Set up the headset according to the headset instructions.

Connecting the power (optional)

Your IP Phone 1230 supports AC power and Power over Ethernet (PoE).For AC power, use only the Nortel-approved Global Power Supply(N0146475) and the country-specific IEC cable that you can orderseparately. To use PoE, your connected LAN must support PoE.

Note: Your IP Phone 1230 supports AC power and PoE options,including IEEE 802.3 standard power. To use local AC power, you canorder the optional AC adapter separately. To use PoE, where power isdelivered over the CAT5 cable, the LAN must support PoE, and youdo not need an AC adapter.

1. Connect the DC barrel connector to the power jack on the back of theIP Phone 1230.

2. Thread the cable through the channel in the foot stand to secure thecable.

3. Plug the country-specific IEC cable into the Global Power Supply,and then plug the Global Power Supply into the nearest AC poweroutlet.

Figure 4 on page 34 shows the connections on the back of theIP Phone 1230.

CAUTION

Use your IP Phone 1230 with theapproved Nortel AC Adapter (model

#N0089601).


37/166


37

Connecting the LAN Ethernet cable

Note: Your IP Phone 1230 supports both AC power and PoE options,

including IEEE 802.3 standard power. To use local AC power, you canorder the optional AC adapter separately. To use PoE, where power isdelivered over the CAT5 cable, the LAN must support PoE, and youdo not need an AC adapter.

Connect your IP Phone to your LAN using a CAT5e Ethernet cable toenable full functionality of your IP Phone. If your Ethernet port is equippedwith Power over Ethernet (PoE), your IP Phone can be powered through

the LAN port. Do not extend the LAN Ethernet cable outside the building.

1. Plug one end of the supplied LAN Ethernet cable into the LANEthernet port on the back of your IP Phone marked with the%symbol.

2. Thread the cable through the channel in the foot stand.

3. Connect the other end of the cable to your LAN Ethernet connection.

The LAN LED on the back of the IP Phone lights when a LANconnection is established.

4. Connect the other end of the cable to your LAN Ethernet connection.The LAN LED on the back of the IP Phone lights when a LANconnection is established.

Figure 4 on page 34 shows the connections on the back of the IPPhone.

Connecting the PC Ethernet cable

Connect the CAT5e PC Ethernet cable between your IP Phone and yourcomputer to enable your computer to access the LAN.

1. Plug one end of the PC Ethernet cable (not supplied) into the PCEthernet port on the back of your IP Phone marked with the(

symbol.

2. Thread the cable through the channel in the foot stand.

3. Connect the other end of the cable to the LAN port on your computer.


38/166


38

Wall-mounting the IP Phone (optional)

You can install your IP Phone 1230 on a wall. Wall-mount the IP Phone

using the two keyholes on the back of the IP Phone. You do not need thefoot stand for wall-mounted applications.

1. Remove the foot stand.

2. Ensure all cables are properly routed and the IP Phone 1230 isfunctioning.

3. Make small marks on the wall where you want to align each keyhole

slot.

4. Insert the screws (not provided) so that they protrude slightly from thewall.

5. Align the keyholes on the back of the IP Phone 1230 with the screwsin the wall.

6. Slide the IP Phone onto the screws to secure the IP Phone 1230 inposition.


39/166

Customizing your IP Phone 1230basic features

39

Customizing yourIP Phone 1230basic features

This section explains how to customize the features on yourIP Phone 1230 to meet your requirements.

Note: Call features and Flexible Feature Codes (FFC) must beassigned to your IP Phone 1230 and supported by system software.Contact your system administrator to configure these features andcodes on your IP Phone 1230.

Your IP Phone 1230 has both server-based telephone features and local(telephone-based) tools. Server-based telephone features are accessedthrough the Telephone Options menu item on the Services menu. Pressthe Services key once to access the Services menu, which has thefollowing menu items:

Telephone Options

You or your system administrator can use the Telephone Optionsmenu to configure telephone preferences. For more information, seeTelephone Options on page 40.

Password Admin

You or your system administrator can use the Password Admin menuto assign or modify the Station Control Password. For moreinformation, see Managing your Station Control Password onpage 63

Virtual Office Login

TheVirtual Office Loginmenu is available on the IP Phone 1230. Youmust configure the Class of Service for Virtual Office.

Note: The Password Admin, Virtual Office Login, and Test LocalMode menus are not available on every IP Phone 1230. Consult yoursystem administrator.


40/166


40

Telephone Options

The Telephone Options menu item provides you with access to the

following features on your IP Phone 1230:

Adjusting volume on page 42

Adjusting the display screen contrast on page 43

Selecting a language on page 44

Selecting date and time format on page 45

Accessing display diagnostics on page 45

Selecting a local dialpad tone on page 46

Viewing IP Phone information on page 47

Performing diagnostics on page 48

Configuring Call Log Options on page 49

Selecting a ring type on page 55

Enabling or disabling Call Timer on page 56

Enabling OnHook Default Path on page 57

Changing feature key labels on page 57

Configuring the name display format on page 59

Configuring Live Dialpad on page 60

Figure 5: Telephone Options menu.

Contrast adjustmentVolume adjustment

Language

Date/Time On hook default path

Local Dialpad Tone Name Display Format

Set Info

Display diagnostics Change Feature Key label

Live Dial Pad

Diagnostics

Call Log Options

Ring type

Call Timer


41/166


41

Note: If a menu includes a submenu, an ellipsis (...) appears after thecommand.

To use the Telephone Options menu, perform the following steps:

1. Press the Services key.

2. Press the Up orDown keys to scroll andselect Telephone Options.

3. Press the Enterkey.

4. Press the Up orDown keys to scroll,and select an option (for example,Language).

5. Press the Enterkey. The displayprovides information required to adjustyour selection.

6. Press the Selectsoft key to save

changes and return to the TelephoneOptions menu.

or

Press the Cancelsoft key to cancel themodifications.

(Services)

or

CancelSelect


42/166


42

Adjusting volume

To adjust the volume:

1. Press the Services key, selectTelephone Options, and select Volumeadjustment

2. Press the Up orDown keys to scroll and

select one of the following: Ringer

Handset listen

Handsfree l isten

Headset l isten

Buzzer


or

4. To increase or decrease the volume,perform one of the following actions:

Press the Up orDown soft keys.

Press the Up orDown navigationkeys.

or

DownUp


43/166


43

Adjusting the display screen contrast

You can adjust the contrast using the Local Tools menu; however, Nortelrecommends that you use the Telephone Options menu.

Note: If an Expansion Module is attached to your IP Phone 1230,changes that you make to the LCD screen contrast of theIP Phone 1230 also apply to the display screen contrast configurationof the Expansion Module.

Use the following procedure to adjust the display screen contrast.

5. Press the Selectsoft key to save the

volume level and return to theTelephone Options menu.

or


1. Press the Services key, selectTelephone Options, and selectContrast adjustment.

or

2. To increase or decrease the displaycontrast level, press the Left orRightkeys.



or

Press the Cancel soft key to cancel themodifications.

or

CancelSelect

or

CancelSelect


44/166


44

Selecting a language

Information that appears on the display is available in multiple languages.

This language setting controls the language only for IP Phone 1230features.

Use the following procedure to configure the language.

1. Press the Services key, selectTelephone Options, and select

Language.

2. Press the Up orDown keys to scroll,and select the desired language (forexample, German [Deutsche]).

Note: You cannot install somelanguages on your IP Phone. Contact

your system administrator for additionalinformation about available languages.


desired language and return to theTelephone Options menu.

or


(Services)

or

CancelSelect


45/166


45

Selecting date and time format

Several date and time formats are available. Formats are based on the

12-hour and 24-hour clocks.

Use the following procedure to select a date and time format.

Accessing display diagnostics

The Display diagnostics command tests the IP Phone 1230 displayscreen and indicator lights.

Use the following procedure to use Display diagnostics.

1. Press the Services key, selectTelephone Options, and select Date/Time.

2. Press the Up orDown keys to scroll,and select the desired date/time format.Sample date/time formats appear on theupper-right side of the display area.


format and return to theTelephone Options menu.

or


1. Press the Services key, selectTelephone Options, and select DisplayDiagnostics.

(Services)

or

CancelSelect

(Services)


46/166


46

Selecting a local dialpad toneWhen you press a key, the response can be a Dual-Tone Multi-Frequency (DTMF) sound, a single tone, or no sound. This is known asthe Local Dialpad Tone.

Use the following procedure to choose a local dialpad tone.

2. Press the Up orDown keys to scrollthrough the list to view displaycapabilities.

3. Press the Cancelsoft key to return tothe Telephone Options menu.

1. Press the Services key, selectTelephone Options, and select LocalDialPad Tone.

2. Press the Up orDown keys to scroll andselect one of the following dialpad tones:

None to disable all tones.

Short Click to enable a single tonefor all keys.

DTMF to turn on a different DTMFtone for each key.

Cancel

(Services)


47/166


47

Viewing IP Phone information

The Local Set Info option displays the following IP Phone-specificinformation.

General Info

Set IP Info

Ethernet Info

Server Info

Encryption Info

Location Info

Use the following procedure to view IP Phone information.


tone selection and return to theTelephone Options menu.

or


1. Press the Services key, selectTelephone Options, and select Local

Set Info.

2. Press the Up orDown keys to scrollthrough the list and view IP Phoneinformation.

3. Press the Cancelsoft key to cancel themodifications.

or

CancelSelect

(Services)

Cancel


48/166


48

Performing diagnostics

The Diagnostics command displays the following IP Phone-specific

information.

Diag Tools (Ping, do Route Traces)

EtherStats (Speed, Auto Neg, CRC Errors, Collision)

IP Stats (Packet Info)

RUDP Stats (Message receive or transmit)

QoS Stats

Use the following procedure to view diagnostic information.

1. Press the Services key, selectTelephone Options, and select LocalDiagnostics.

2. Press the Up orDown keys to scrollthrough the list of diagnostic information.

3. Press the Cancel soft key to return tothe Telephone Options menu.

(Services)

Cancel


49/166


49

Configuring Call Log Options

Use the call log option to configure the following preferences:

Configuring the Callers List log on page 49

Configuring New Call Indication on page 50

Configuring Preferred Name Match on page 51

Configuring the area codes on page 52

Configuring the Callers List log

You can configure the Callers List to log all incoming calls or to log onlyunanswered calls. The default configuration is to log all calls.

Use the following procedure to configure the Callers List.

1. Press the Services key, selectTelephone Options, and select Call

Log Options.

2. Press the UporDown keys to scroll andselect theIncoming Calls option.


select the Log Mode option.


5. Press the Up orDown keys to scroll andselect Log Unanswered Calls.

(Services)


50/166


50

Configuring New Call Indication

You can configure your IP Phone 1230 to display a message that

indicates a new call. By default, this option is On.

Use the following procedure to configure New Call Indication.

6. Press the Select soft key to save theconfiguration.

or

Press the Cancel soft key to keepexisting configurations.

1. Press the Services key, selectTelephone Options, and select CallLog Options.

2. Press the UporDown keys to scroll andselect theIncoming Calls option.

3. Press the Up orDown keys to scroll andselect the New Call Indication option.



select one of the following:

New call indication: Off

New call indication: On

or

CancelSelect

(Services)


51/166


51

Configuring Preferred Name Match

You can configure your IP Phone 1230 to display the name of the caller

as defined in your Personal Directory. By default, the option is Off.

Use the following procedure to configure Preferred Name Match.

6. Press the Select soft key to save the

configuration.

or



2. Press the Up orDown keys to scroll andselect Preferred Name Match.


4. Press the Up orDown keys to scroll andselect one of the following:

Preferred name match: On

Preferred name match: Off

or

CancelSelect

(Services)


52/166


52

Configuring the area codes

Use theArea Code Setup menu to save up to three area codes. When a

call arrives with an area code that matches one of the saved area codes,the calling number is reordered to display the telephone number followedby the area code (as opposed to the area code followed by the telephonenumber).

This reordering applies when you scroll through your Callers List.

Use the following procedure to configure default area codes (maximum of

three).


configuration.

or



2. Press the Up orDown keys to scroll andselectArea Code Setup.


or

CancelSelect

(Services)


53/166


53

Use the following procedure to edit area code display.


1st Code

2nd Code

3rd Code


6. Use the dialpad to enter the number atthe prompt.

7. Press the Select soft key to save theconfiguration.

or



2. Press the Up orDownkeys to scroll andselectArea Code Setup.

or

CancelSelect

(Services)


54/166


54



1st Code

2nd Code

3rd Code


6. Use the dialpad to edit the number.


configuration.

or


or

CancelSelect


55/166


55

Selecting a ring type

Use the Ring type option to configure the IP Phone ring tone.

Use the following procedure to select a ring type.

1. Press the Services key, selectTelephone Options, and select Ringtype.

2. Press the Up orDown keys to scroll andselect one of the ring types.

3. Press the Play soft key to sample thering tone.

4. Press the Selectsoft key to save thering type and return to the TelephoneOptions menu.

or

Press the Stop soft key and use the

Up orDown keys to select a differentring type.

or


(Services)

Play

Select

Cancel

Stop


56/166


56

Enabling or disabling Call Timer

The call timer measures the call duration.

Use the following procedure to enable or disable Call Timer.

1. Press the Services key, selectTelephone Options, and select Calltimer.

2. Press the Up or Down keys to enable ordisable the Call Timer.


configuration and return to theTelephone Options menu.

or


(Services)

or

CancelSelect


57/166


57

Enabling OnHook Default Path

Use the OnHook Default Pathoption to enable Headset or Handsfree for

your IP Phone 1230.

Use the following procedure to enable OnHook Default Path.

Changing feature key labels

Use the Change Feature Key label option to rename the label thatcorresponds to the feature key. You can define labels with a maximum ofnine characters. You can also restore the default labels (collectively orindividually).

Note: If a feature key is configured as an autodial key, the label doesnot change if the autodial key configuration changes.

1. Press the Services key, selectTelephone Options, and select OnHook default path.

2. Press the Up orDown keys to selectone of the following:

HandsfreeEnabled

HeadsetEnabled


default path and return to the TelephoneOptions menu.

or


(Services)

or

CancelSelect


58/166


58

Use the following procedure to rename the labels.

Use the following procedure to restore the default labels.

1. Press the Services key, selectTelephone Options, and select ChangeFeature Key label.


3. Press the featurekey to change thelabel.

If you press a prime DN key, an errormessage appears.

4. Enter the new information for the feature

key label. To enter special characters,press the Up key. For information aboutentering text, see Using the telephonedialpad on page 82.



or


1. Press the Services key, selectTelephone Options, and select ChangeFeature Key label.

(Services)

2493

or

CancelSelect

(Services)


59/166


59

Configuring the name display format

You can configure your IP Phone 1230 to display the name of the calling

party in one of the following formats: first name, last name

last name, first name

Use the following procedure to configure name display format.


3. Use the Up orDown keys to scroll, andselect one of the following:

a. To restore all key labels, press theYes soft key.

b. To restore one key label:

Press the Select soft key.

Press the feature key.

Press the Yes soft key to change theselected feature key label to thedefault value.

Note: If you change the labels to default

values, you cannot undo the change.You must redefine the custom labels.

1. Press the Services key, select

Telephone Options, and select NameDisplay Format.(Services)


60/166


60

Configuring Live Dialpad

The Live Dialpad option activates the Primary DN key when you make a

call by dialing a directory number on the dialpad without picking up thehandset or pressing the Handsfree key.

Use the following procedure to configure Live Dialpad.


first name, last name

last name, f irst name


configuration.

or


1. Press the Services key, selectTelephone Options, and select LiveDial Pad.


On

Off (default)

or

CancelSelect

(Services)


61/166


61


configuration.

or

Press the Cancel to cancel themodifications.

or

CancelSelect


62/166

Customizing your IP Phone 1230advanced features

62

Customizing yourIP Phone 1230advanced

features

You can customize features on your IP Phone 1230 to meet yourrequirements. This section describes how to customize the advancedfeatures.

You and the system administrator can customize the following advancedfeatures:

Password Admin

Use thePassword Admin menu to assign or modify the StationControl Password. See Managing your Station Control Password onpage 63.

Electronic Lock

Assign a lock on your IP Phone to secure your IP Phone and avoidmisuse. See Configuring an Electronic Lock on your IP Phone on

page 65. Personal Directory

Customize the Personal Directory to store your choice of names. SeeCustomizing the Personal Directory on page 67.

Local Tools menu

Use the Local Toolsmenu to configure personal preferences. SeeConfiguring the Local Tools menu on page 72.

Virtual Office Login

TheVirtual Office Loginmenu can be configured on IP Phone 1230.Class of Service must be configured for Virtual Office. See UsingVirtual Office on page 77.

CAUTION

Many of the options discussed in thissection are for the system administratoronly. Do not make changes unless you aretold to do so by an administrator.


63/166


63

Note: The Password Admin and Virtual Office Login menus arenot available on every IP Phone 1230. Consult your systemadministrator.

Managing your Station Control Password

You can assign a Station Control Password (SCPW) to:

lock your IP Phone and prevent the misuse of your IP Phone

use password-protected features such as customizing the PersonalDirectory, using the Redial List, and using the Callers List

Note: Your system administrator defines your initial SCPW. Contactyour system administrator for detailed information.

Assigning an SCPW

Use the following procedure to assign an SCPW.


2. Press the Up orDown keys to scroll andselect Password Admin.


4. Press the Up orDown keys to scroll andselect New Password.

(Services)


64/166


64

Turning Password Protection on or offUse the following procedure to turn Password Protection on or off.


6. Enter your new password using thedialpad. To enter special characters,press the Up key. For information aboutentering text, see Using the telephonedialpad on page 82.

7. Press the Select soft key to accept thenew password.

Note: If you are locked out of your IPPhone 1230, or if you forget your SCPW,contact your system administrator.

1. Press the Directory key.

2. Press the Up or Down keys to scroll andselect Change Protection Mode.

3. Enter your new password using thedialpad (if Password Protection isenabled).To enter special characters, press theUp key. For information about enteringtext, see Using the telephone dialpadon page 82.

Select

(Directory)


65/166


65

Note: The default configuration for Password Protection is off.

Configuring an Electronic Lock on your IPPhone

Use the Electronic Lock feature to prevent others from making calls fromyour IP Phone 1230. Your SCPW controls the Electronic Lock feature. Tochange your Station Control Password, see Managing your StationControl Password on page 63.

Locking your IP Phone 1230

Use the following procedure to lock your IP Phone 1230.

4. Press the Entersoft key.

5. Press the Up or Down keys to scroll andselect one of the following:

Enable Password Protection

Disable Password Protection

6. Choose Yes to accept the selection

or

Choose No to return to the Directorymenu

7. Press the Done soft key.

1. Lift thehandset.

Enter

or

NoYes

Done


66/166


66

Unlocking your IP Phone 1230

Use the following procedure to unlock your IP Phone 1230.

2. Dialthe Electronic Lock Activate FFC.

3. Dial your Station Control Password.

or

4. If you dial locally, press the Goodbyekey.

or

If you dial the FCC remotely, dialyourDN.

1. Lift the handset.

2. Dialthe Electronic Lock DeactivateFFC.

(Goodbye)


67/166


67

Customizing the Personal Directory

Use the Personal Directory feature to create and store up to 100 contactsof your choice. A Personal Directory entry can contain

last name (up to 24 characters)

first name (up to 24 characters)

telephone numbers (up to 31 characters)

To use the Personal Directory, press the Directory key and select

Personal Directory.

Adding an entry

Use the following procedure to add an entry to the Personal Directory.

3. DialyourStation Control Password.

or

4. If you dial locally, press the Goodbyekey.

or

If you dial the FCC remotely, dialyourDN.

1. Press the Directory key and select

Personal Directory.

(Goodbye)


68/166


68

Editing an entry

Use the following procedure to edit an entry in the Personal Directory.

2. Press theAdd soft key.

If the message Directory is full

appears, delete one or more entries toaccommodate a new entry.

3. Use the dialpad to enter the name.To enter special characters, press theUp navigation key. For information aboutentering text, see Using the telephone

dialpad on page 82.

4. Press the Next soft key.

5. Use the dialpad to enter the telephone

number.

6. Press the Done soft key to save the newentry.

orPress the Cancel soft key to return tothe Add screen without saving the newentry.

1. Press the Directory key and selectPersonal Directory.

Add

Next

or

CancelDone


69/166


69

Deleting an entryUse the following procedure to delete an entry in the Personal Directory.

2. Press the Up orDown keys to scroll andselect the desired entry.

3. Press the Edit soft key and make thenecessary changes.

4. Press the Done soft key to save the

changes.

or

Press the Cancel soft key to return tothe Personal Directory without savingyour changes.


2. Press the Up orDown keys to scroll andselect the desired entry.

3. Press the Del soft key.

Edit

or

CancelDone

Del


70/166


70

Copying an entry

Use the following procedure to copy an entry in the Personal Directory.

4. Press the Yes soft key to delete theentry.

or

Press the No soft key to return to thePersonal Directory without deleting theentry.


2. Press the Up orDown keys to scroll,

and select the desired entry.

3. Press the More soft key.

4. Press the Copy soft key to configure thenew entry.

5. Use the dialpad to enter the name.To enter special characters, press theUp navigation key. For information about

entering text, see Using the telephonedialpad on page 82.

or

CancelConfirm

More

Copy


71/166


71

Searching for an entry

Use the following procedure to search for an entry in the PersonalDirectory.

6. Press the Done soft key to save thechanges.

or

Press the Cancel soft key to return tothe Personal Directory without savingyour changes.

1. Press the Up or Down keys to scroll andselect the desired entry.

2. Press the Dial soft key to call thenumber.

or

Press the Directory soft key to exitwithout calling.

or

CancelDone

or

DirectoryDial


72/166


72

Configuring the Local Tools menu

Your IP Phone 1230 has both local and server-based telephone tools and

features. This section discusses the various tools and features availablelocally on your IP Phone 1230.

Note: Your system administrator can establish a password for theLocal Tools menu. When the password is enabled, a passwordprompt dialog box appears when you attempt to access this menu. Ifthis happens, contact your system administrator.

Local tools and features are accessed through the Local Tools menu.Press the Services key twice to access this menu. Your system

administrator can establish a password for the Local Tools menu. Whenthe password is enabled, a password prompt appears when you attemptto access this menu. If this happens, contact your system administrator.

The Local Tools menu has the following menu options:

1. Preferences on page 74

2. Local Diagnostics on page 76

3. Network Configuration on page 77

4. Lock Menu on page 77

If a menu command has a number in front of it, you can select thecommand by pressing the associated key on the dialpad. For example, inthe Local Tools menu, access Local Diagnostics by pressing 2 on thedialpad.

CAUTION

Many of the options discussed in thissection are for administrator use only. Donot make changes unless you areinstructed by an administrator.


73/166


73

The function of some keys on the IP Phone 1230 differs based on thesituation. Table 5 on page 73 describes the function of each key fornavigating and using menus.

Table 6 on page 73 describes the key functions in dialog boxes.

Table 5: Navigation key functions in menus

Key Function

Down arrow key Select the next menu item.

Up arrow key Select the previous menu item.

Right arrow key Select the current menu item.

Left arrow key Close the menu.

Enterkey Select the current menu item.

Enter digits on thedialpad

Select the associated menu item.

Stop soft key Close the menu.

Cancel soft key Close the menu.

Select soft key Select the current menu item.

Table 6: Navigation key functions in dialog boxes

Key Function

Down arrow key Scroll down in the window.

Up arrow key Scroll up in the window.

Right arrow key Go to the next Edit item.

Left arrow key Go to the previous Edit item.

Enterkey Turn Edit mode on or off.Select or clear a check box.


74/166


74

When you work in Edit mode, the first field of the item is selected and ablinking cursor appears to the right of the current edit position. Table 7 onpage 74 describes the navigation key functions in Edit mode.

Note: Special characters are accessed by pressing 1. By repeatedly

pressing 1, the characters circle in the following sequence: 1, _, -, ., !,@, $, %, &, +, :, /, \.

1. Preferences

Use the 1.Preferences menu to alter the following local preferences:

1. Contrast

2. Language

1. Contrast

Use the Contrast tool to alter the physical settings of the display.

Table 7: Navigation key functions in Edit mode

Key Function

Down arrow key Open the list.Select the next menu item.

Up arrow key Select the previous menu item.

Right arrow key Select the current list item.Move the cursor to the right.

Left arrow key Delete the prior character in the edit field.Moves cursor to the left.

Enterkey Select the current menu item.Save modifications to the menu item.Exit edit mode box.

Enter charactersor digits on thedialpad

Insert characters or digits at the current cursorposition.

Note: Press the star (*) key to insert aperiod (.).


75/166


75

Note: Changes made to the display Contrast using this method arelost if you reset the IP Phone. To avoid this situation, Nortelrecommends that you use the Contrast Adjustment control in theTelephone Options menu for contrast adjustment.

Use the following procedure to adjust the Contrast setting.

2. Language

Information that appears on the IP Phone display is available in multiplelanguages.

Use the following procedure to select a language

1. Press the Services key twice to openthe Local Tools menu, press the 1 keyon the dialpad to select Preferences,and press the 1 key to select Contrast.

2. Press the right or left arrow keys toincrease or decrease the contrast value.

3. Press the Enterkey to save thechanges.

1. Press the Services key twice to openthe Local Tools menu, press the 1 keyon the dialpad to select 1. Preferences,and press the 2 key to select2. Language.

2. Press theup or downkeys to scroll andselect the desired language (forexample, German [Deutsche]).

(Services)

(Services)


76/166


76

Note: This language setting only controls the language used in the

local menus on your IP Phone. To select the language for features onyour IP Phone, press the Services key, select Telephone Options,and select Language

2. Local Diagnostics

The 2. Local Diagnostics submenu offers the following choices:

IP Set and DHCP Information - View reports about IP Phone 1230

and DHCP operation.

Network Diagnostic Tools - Diagnose network problems using pingand trace route tools.

Ethernet Statistics tool - View reports about Ethernet operation.

IP Network Statistics - View reports about network operation.

Press the Return soft key at any time to return to the previous LocalDiagnostics submenu if you customize the IP Phone using the Local

Diagnostics submenu. You can gather information and run tests withoutexiting and re-entering the Local Tools menu. For example, you cancheck the Ethernet Statistics, and then press Return to enter the NetworkDiagnostics Tools to ping an IP address.

3. Press the Enterkey to save thechanges.

4. Press the Cancel key to exit thePreferences menu without saving thechanges.

CAUTION

Local Diagnostics, Network Configuration,and the Lock Menu items are for systemadministrator use only.

Cancel


77/166


77

3. Network Configuration

The Network Configuration tool displays information that was configuredwhen you installed the IP Phone 1230. This tool is for administrator use

only.

4. Lock Menu

Your system administrator can use the Lock Menu tool to protect theLocal Tools menu items from accidental or unwanted changes. This toolis for administrator use only.

Using Virtual Office

Use the Virtual Office feature to transfer calls and your office IP Phonesettings to a remote IP Phone. You can use the remote IP Phone as if itwere your office IP Phone. You can use another IP Phone (the remotephone) to log on to your Office IP Phone. After you log on, you canaccess the DNs and autodial numbers, and you have the same key

layout, feature keys, and voice mail features that are configured on youroffice IP Phone.

To use Virtual Office, you need your DN and a preconfigured SCPW. Youmust activate Virtual Office on your office IP Phone before you canconnect to it from a remote IP Phone. See Logging on to Virtual Officeon page 78.

Consult your system administrator to confirm the availability of the VirtualOffice feature on your IP Phone.

The IP Phone used as a remote phone to connect to your IP Phone 1230does not have to be another IP Phone 1230. Table 8 on page 77 showsthe IP Phones on which you can use Virtual Office to connect to your IPPhone 1230.

Table 8: Virtual Office connection availability (Part 1 of 2)

IP Phone Can I log on to IP Phone 1230?

IP Phone 1110 Yes, with extra key restrictions


78/166


78

Logging on to Virtual Office

Use the following procedure to activate Virtual Office on your office IPPhone 1230 from your remote IP Phone.

IP Phone 1120E Yes, with extra key restrictions

IP Phone 1140E Yes, with extra key restrictions

IP Phone 1150E No





IP Audio ConferencePhone 2033

Yes, with extra key restrictions

IP SoftPhone 2050 Yes, with extra key restrictions







Table 8: Virtual Office connection availability (Part 2 of 2)

IP Phone Can I log on to IP Phone 1230?

(Services)


79/166


79

A successful logon transfers all the features, time, date, and tones of your

office IP Phone 1230 to your remote IP Phone. Your Virtual Office sessionexpires after a fixed period of time which your system administratordetermines.

2. Press the Up or Down keys to scroll andselect Virtual Office Login.


4. At the prompt, enter your user ID.


6. At the prompt, enter the home StationControl Password (SCPW).

If the user ID is not found locally, themessageLocating Remote Serverappears.

Note:After three failed logon attempts,

you must wait for an hour before you tryto log on again. Alternatively, contactyour system administrator to reset yourpassword. For more information, seeAssigning an SCPW on page 63.


80/166


80

Using Virtual Office on your remote IP Phone

The display characteristics, including size of the display area, differ withIP Phone models. Your Virtual Office display depends on the remote

IP Phone that you use to log on to your Virtual Office. All features are thesame as they appear on your office IP Phone 1230.

An IP Phone 1120E that is logged on remotely to an IP Phone 1230provides less information than the IP Phone 1230 because it has fewerdisplay lines.

When an IP Softphone 2050 logs on remotely to an IP Phone 1230, the

information display is arranged differently, but all the information is visibleat one time.

Regardless of the IP Phone model that you use as a remote IP Phone, auser information line appears that lists the number of your officeIP Phone.

Using Virtual Office on your office IP Phone

When activated for Virtual Office by a remote IP Phone, your office IPPhone logs off and is no longer operational. When you return to the office,disconnect the remote logon to regain control of your office phone. If youdo not explicitly disconnect the remote logon, your Virtual Office sessionexpires after a fixed period of time, which your system administratordetermines.


81/166


81

Disconnecting your office IP Phone from a remote IPPhone

Use the following procedure to disconnect your office IP Phone from a

remote IP Phone.

Logging off Virtual Office

Use the following procedure to log off from Virtual Office when working ona remote IP Phone.

or

To disconnect your office IP Phone fromthe remote IP Phone

a. Press the Home key.

b. Enter your User ID and password(this logs on the office IP Phone toyour office network).

or

Press the Virtual soft key to log on toanother IP Phone, and your IP Phonebecomes a remote IP Phone.


2. Press the Up or Down keys to scroll andselect Virtual Office Logout.


Home

Virtual

(Services)


82/166

Operating your IP Phone 1230

82


This section describes how to operate your IP Phone 1230. It describesoperations such as entering text, making a call, using the Corporatedirectory, and using the Redial List.

Entering and editing text

You can enter and edit text on your IP Phone 1230 using the following

methods: Using the telephone dialpad on page 82

Using the soft keys on page 82

Using the telephone dialpad

You can use the dialpad to enter text when you use features such asPersonal Directory, Redial List, and Callers List.

For example, to enter the letter A, press the 2 key once. To enter theletterC, press the 2 key three times.

Note: No letters are associated with the 1 or the 0 keys.

Using the soft keys

You can use soft keys to edit text when you use features such asPersonal Directory, Redial List and Callers List.

Use the following procedure to edit an entry in your Personal Directory.

1. Press the Directory key.

2. Select the desired entry from Personal Directory.

3. Press the Edit soft key.

4. Press the Left orRight keys to move through the text.

5. Select the appropriate editing soft key for the operation you want toperform.


83/166


83

6. If the key you want is not visible, press the More soft key to accessthe next layer of soft keys.

7. Press the Up key to access the symbols.

8. Press the Left orRight keys to move to a specific symbol.

9. Press the Choose soft key to select a symbol.

10. Press the Next soft key to submit your changes.

Table 9 on page 83 describes the soft key editing functions on the IPPhone 1230.

Making a call

This section describes the various ways you can make a call from yourIP Phone 1230

Using the Callers List on page 84

Using the Redial List on page 86

Using Off-hook dialing on page 88

Using On-hook dialing on page 89

Using Handsfree dialing on page 90

Using the Corporate Directory on page 92

Table 9: Editing soft key description

Soft key Description

Cancel Cancel action.

Choose Select a symbol.

Clear Clear the input field.

Case Switch the next character to either uppercaseor lowercase.

Delete Backspace one character.

Done/Select/Enter Application-dependent.

More Access additional soft keys.


84/166


84

Using the Personal Directory on page 93

Using Predial on page 94

Using AutoDial on page 95

Using Ring Again on page 97

Using Last Number Redial on page 98

Using Speed Call on page 99

Using System Speed Call on page 100

Using HotLine on page 100

Using Intercom Calling on page 101

Using the Callers List

The Callers List logs all incoming calls. The Callers List can store up to100 entries. When the list is full, the oldest entry is overwritten. Use theCallers List to review missed calls and make a call, if desired. The CallersList contains the following components:

the callers last and first name (if available)

the DN of the caller the time and date of the call

the number of times the caller called

Callers List entries are sorted by call arrival time.

The format of names in the Callers List depends on the configuration ofPreferred Name Match. The Calling Party Name Display (CPND) appears

according to the configuration settings on your IP Phone if PreferredName Match is active on your IP Phone. If Preferred Name Match is off,the CPND appears as determined by the system configuration.

To access the Callers List, press the Directory key, and select CallersList. If password control is enabled, you must enter your SCPW at theprompt.


85/166


85

Dialing an entry

Use the following procedure to dial an entry in the Callers List.

Deleting an entry

Use the following procedure to delete an entry in the Callers List.


2. Press the Dial soft key.



3. Press the Yes soft key to confirm theentry deletion.

or

Press the No soft key to return to theCallers List without deleting the entry.

Dial

Del

or

NoYes


86/166


86

Deleting the entire Callers List

Use the following procedure to delete the entire Callers List.

Using the Redial List

The Redial List logs a maximum of 20 outgoing calls. When the list is full,

the system overwrites the oldest entry. Use the Redial List feature toreview calls made and to redial numbers. The Redial List contains

the last and first names of the dialed party (if available)

the DN of the dialed party

the time and date of the last occurrence of the call

Entries in the Redial List are sorted based on the time of the call.

The format of names in the Redial List depends on the configuration ofPreferred Name Match. The Calling Party Name Display (CPND) appearsaccording to the configuration settings on your IP Phone if PreferredName Match is active on your IP Phone. If Preferred Name Match is off,the CPND appears as determined by the system configuration.

To access the Redial List, press the Directory key and select Redial

List. Alternatively, press the Outbox (Redial) key. If password control isenabled, you must enter your SCPW at the prompt.


2. Choose Yes to delete the entire CallersList

or

Choose No to return to the previousscreen

Del

or

NoYes


87/166


87

Dialing an entry

Use the following procedure to dial an entry in the Redial List

Deleting an entry

Use the following procedure to delete an entry in the Redial List.


2. Press the Dial soft key.



3. Choose Yes to confirm the entrydeletion.

or

Choose No to return to the previousscreen without entry deletion.

Dial

Del

or

NoYes


88/166


88

Deleting the entire Redial List

Use the following procedure to delete the entire Redial List.

Using Off-hook dialing

Perform the following steps to make a call by using the handset.


2. Choose Yes to confirm the deletion ofthe entire Redial List.

or

Choose No to return to the previousscreen without deletion.

1. Lift the handset.

2. Dial the number.

or

3. To end the call, return the handset to thecradle

or

Press the Goodbye key.

Del

or

NoYes

(Goodbye)


89/166


89

Using On-hook dialing

Perform the following steps to make a call without lifting th

Documents

Nortel IP phone 1230_user_guide_.pdf