Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
NORTEKSECURITY & CONTROLLINEAR SECURITY – WIRELESS
Master Index
HVAC Copper/Metal Theft Prevention
Copper Cop™ is an efficient, dependable and reliable security protection solution designed to combat theft of commercial air conditioning (HVAC) units. Copper Cop can be installed and activated in minutes by a security professional and, unlike other HVAC alarm products, does not require an HVAC, Plumber’s or Electrical Contractor’s License.
Thousands of commercial HVAC units are destroyed each year by thieves seeking to gain quick cash by stealing copper condenser lines and selling them at scrap yards. The cost of business disruption can be high, including replacement of the HVAC system, and inability to use the facility while the HVAC service is being restored. Additionally, repeated thefts increase a company’s insurance premiums, making copper theft one of the most vexing challenges businesses face today.
Linear, a leader in innovative and cost-effective security products and theft prevention systems, has developed Copper Cop for Security dealers and integrators whose customers want a quick, secure, and active deterrence solution.
The Solution Is HereLinear’s Copper Cop consists of a unique 30-foot cable harness with eight self-tapping screw-in clip assemblies, connected to a weatherproof alarm interconnect box. The system is ready to accept a wireless alarm transmitter or hard-wired connection to a security alarm panel. Once Copper Cop is installed on the exterior of the HVAC unit and activated, removal of the HVAC unit cover or tampering with the cable triggers an alarm.
Field-Proven, Simple and Effective Copper Theft Deterrence
Copper Cop tamper-resistant
alarm interconnect box
Copper Cop cable harness &
interconnect box
Linear LLC | 1950 Camino Vida Roble | Suite 150 | Carlsbad, CA 92008 | 800.421.1587 | www.linearcorp.com P/N 234762A
For more information, please visit www.linearcorp.com.Specifications subject to change without notice.
Features
• Reliable, simple non-intrusive solution to guard against HVAC unit copper or metal theft• Does not require Electrician’s, Plumber’s or HVAC Contractor’s license • Does not trigger a false alarm even if fluctuations in refrigerant pressure or electrical power
outages occur**Connected alarm system must have backup battery power to operate properly during a power outage
• Ready to accept hard-wired alarm system connection or wireless alarm transmitter• Optional secondary 30-foot harness can be added to cover larger commercial HVAC units
(60’ length total)• Bright yellow cable harness acts as a visual deterrent to would-be thieves
Target Markets
• Schools • Places of Worship • Single-Story Retail Buildings • Cellular Network Facilities / Towers• Remote Communication Centers • Substation Outbuildings
Accessories
Model # Description
DXS-31 Wireless RF Alarm Sensor Transmitter
DXR-702 2-Channel Wireless RF Alarm Sensor Receiver
CC3008XT Secondary 30-foot Extension Harness (for larger HVAC units)
CC3008WK1 Copper Cop Kit with Wireless Transmitter and Receiver
HVAC Copper/Metal Theft Prevention
Copper Cop Wireless and Hard-Wired System
Your HVAC is an open invitation for copper thieves!
Stop thieves in their tracks with…
Field-Proven, Simple and Effective Copper Theft Deterrence
Linear Copper Cop theft deterrent products are distributed by:
www.linearcorp.com235721A
Copper Cop Cable Harness & Interconnect Box
Copper Cop is Ideal for:
• Schools
• Places of Worship
• Single-Story Retail Buildings
• Cellular Network Facilities / Towers
• Remote Communication Centers
• Substation Outbuildings
Thieves want the recyclable copper and other metal parts of your HVAC units and exterior machinery…Copper Cop safeguards your HVAC units from theft and destruction!
Metal theft has increased by 81% since 2008, with copper being stolen more than any other metal, according to the National Insurance Crime Bureau.
Field-Proven, Effective Theft Deterrence
• Installs quickly on HVAC unit exterior by any Securitycontractor – no need to pay an electrician or plumber
• Bright yellow cable harness acts as a visual deterrent
to would-be thieves
• Connects to your existing security system or nearlyany independent alarm/siren apparatus
• Does not trigger a false alarm, even if fluctuations inrefrigerant pressure or electrical power outages occur
• Accepts hard-wired alarm system connection or wireless alarm transmitter
Cut Your Risk
Don’t risk higher insurance premiums due to theft, or, the loss of potential goods, business and equipment by the lack of A/C while a new system is ordered and installed.
Copper Cop guards against:
• Employees being inconvenienced by business closure
• Loss of perishable items (food products, anything thatcannot stand excessive heat/cold)
• Damage to sensitive computer equipment or systemsdue to excessive heat
Learn More
• Watch the Copper Cop Video at: www.linearcorp.com/coppercop
• Download the Copper Cop datasheet at: www.linearcorp.com/pdf/literature/Copper-Cop-Lit.pdf
• Contact your local Security sales rep or, call Linear at:800.421.1587 for a referral in your area.
Copper Cop Tamper-Resistant Alarm Interconnect Box
Scan QR code for more information:
A Simple, Practical Line of
Smart Home Connected Products
... Your Connected World
PRINTER’S INSTRUCTIONS:GOCONTROL BROCHURE - NORTEK P/N: 235610F - INK: 4/4: 4-COLOR PROCESS - SADDLE STITCHED BOOK - PAPER STOCK: PLUS COVER: ENDURANCE VELVET 80 lb. COVER - INSIDE PAGES: ENDURANCE VELVET 100 lb. TEXT - SIZE: 8.500” X 11.000” - SCALE: 1-1 - 12 PAGES
With GoControl-branded Smart home solutions, you get fully-compatible, easy-to-use and affordable smart products that satisfy your family’s home control needs and desires.
GoControl Smart products are so easy to install—and they work with nearly everything else that talks Z-Wave®. Mix and match GoControl Smart products to create your own personal mix of smart control. Even add other brand smart products to rev-up your smart home IQ!
Smart Products for Everyday Life
Easy-to-Use Compatible Affordable
LBR30Z-1
Flood Light Bulb Smart Dimmable LED Indoor Flood LightBy simply removing an existing flood light bulb and screwing in this GoControl Smart LED dimmable indoor flood light bulb, you’ll get beautiful, warm 65-watt equivalent lighting for only 7.5 watts of energy use. Using your Z-Wave hub, you’ll also get ’scene’ control for setting the right mood, or making this light turn on or off when other Z-Wave devices are activated whether you’re at home or away!
LB65R6Z-1
In-Ceiling Smart LED Recessed Retrofit Lighting KitThe GoControl Smart LED Recessed Retrofit Light Kit is designed to replace a conventional 5" or 6" recessed downlight. The kit comes with a new white trim ring providing a fresh, clean look. It is simple to install and setup and provides a long, 20+ years of life (3 hrs. /day). The light provides instant-on, bright and fully-dimmable illumination, equal to 65-watt incandescent bulbs, but uses only 8.5 watts of energy—far superior than either incandescent or fluorescent light bulbs.
LB60Z-1
Bulbz Smart Dimmable LED Standard Light BulbThe GoControl model LB60Z-1 instant-on Smart LED screw-in light bulb is fully-dimmable, and provides pleasant soft-white illumination equivalent to a 60-watt incandescent bulb, yet uses only 9 watts of energy. You get great value and Z-Wave remote control convenience with an estimated 22+ year lifespan.
Control your home’s mood remotelyUsing your Z-Wave hub, connect and control your GoControl light bulbs and lighting fixtures from the switch or wirelessly from your app to get the mood for comfortable living just right.
SMART ELECTRICAL
SMART ELECTRICAL
WA00Z-1
Smart Battery-Powered Wall Switch• Great for controlling GoControl (or
other brand) Z-Wave lightbulbs installed in fixtures that use a wall switch
• Easily controls ON/OFF or dimming of lighting
• One switch can be programmed to control up to 5 Z-Wave dimmers, switches and other Z-Wave automation devices
• Can be mounted over any standard or decorator-style switch, or on just about any surface (Simple self-adhesive mounting pads included; can also screw-mount over switch if desired)
• No need to do any wiring at all!
WS15Z5-1
Smart Switch
Automatically turn on or off any device, saving time and energy. From turning on the coffee maker in the morning so your fresh brew is waiting to the ceiling fan when it gets too hot, the Smart Switch is perfect for small appliances or lights.• Supports multi-tap scene control for up
to 8 programmed Scenes• Replaceable Decorator trim ring design –
available in black, brown and almond
WT00Z5-1
Smart 3-Way Switch/Dimmer
Control any device, light or lights from anywhere you have power, with no new wiring needed. The Smart 3-Way Switch can control up to 5 dimmers and 5 on/off switches, with no extra wires. No more traveler wires, no more limits. • Supports multi-tap scene control for up
to 8 programmed Scenes• Creates multi-switch “3-way” circuits
without the need for a traveler wire• Replaceable Decorator trim ring design –
available in black, brown and almond
WO15EMZ5-1
Smart EM Wall Outlet
Every outlet can now be smart and efficient. The EM Wall Outlet has one controlled and one standard outlet allowing for simultaneous normal and Energy Monitored automated operation.• Energy Monitoring reports energy usage• Tamper resistant per National Electrical
Code (2008)
WD500Z5-1
Smart Dimmer SwitchCreate the ideal lighting environment with the Smart Dimmer Switch. With 100 step dimming this switch can set the ideal lighting scene from romantic low light to full brightness for emergency situations
• Supports multi-tap scene control for up to 8 programmed Scenes
• Replaceable Decorator trim ring design – available in black, brown and almond
Smart Lighting Control Made Easy
GoControl Smart home solutions help make busy lives easier, giving you the smart remote control you want most.
With GoControl, just about anything in your home that you want to control, automate and monitor is just a click away. We give you affordable and intelligent solutions to set the right mood and help protect the people and places you hold dear. GoControl Smart products really rev-up your smart home’s IQ!
Part Number DescriptionZ-Wave Range(line of sight)
Operating Temp. Power/Battery Color Security Compatible Repeats Signal
WAPIRZ-1 Passive Infrared Motion Detector - Up to 100' 5° - 140° F 3 VDC/CR123A White -
WADWAZ-1 Door-Window Sensor - Up to 100' 5° - 140° F 3 VDC/CR123A White -
WA105DBZ-1 Siren/Strobe Warning Device - Up to 100' 5° - 140° FAC Powered with 6 VDC/NiMH (permanent cell)
White w/red lens GB00Z-2 Glass Break Sensor - Up to 100' 32° to 120° F 3 VDC/CR123A (2) White -
WF00Z-1 Water Leak Sensor Up to 130' 32° to 120° F 3 VDC/CR123A White -
Part Number DescriptionZ-Wave Range(line of sight)
Operating Temp. Power/Battery Color Security Compatible Repeats Signal
GD00Z-4Garage Door Opener Remote Controller Up to 130’ -4° to 122° F
Controller: 12 VDC from 120 VAC/60Hz power supply; Tilt Sensor: CR2032
Black
GC-TBZ48 Battery-powered Smart Thermostat - Up to 100' 32° to 120°F4 x ‘AA’; Can be powered by 24V HVAC “R” or “C” wire
Whitew/silver trim -
Part Number Description Brightness Light Appearance Energy Use Avg. Life Repeats Signal
LB60Z-1 Dimmable LED Standard Light Bulb (60-watt equivalent) 750 lumens 2700° K 9 watts 22.8 years (3 hrs./day) LBR30Z-1 Dimmable LED Flood Light Bulb (65-watt equivalent) 650 lumens 5000° K 7.5 watts 22.8 years (3 hrs./day) LB65R6Z-1 Retrofit Recessed LED Light Bulb Kit (65-watt equivalent) 650 lumens 2700° K 8.5 watts 22.8 years (3 hrs./day)
Part Number DescriptionIsolated Contacts/Resistive
Motor Incandescent Auto Sense Replaceable Trim Ring Repeats Signal
WD1000Z-1 In-Wall Dimmer Switch, 1000 W - n/a n/a1000W (installed lighting, no receptacles)
-
WD500Z5-1 In-Wall Dimmer Switch, 500 W n/a n/a500W (installed lighting, no receptacles)
-
WT00Z5-1 In-Wall Wireless “3-Way” switch None (does not control a load directly) - WS15Z5-1 In-Wall Switch 15 amps, 1800W max 1/2 H.P. maximum, 120 VAC 600W max, 120 VAC - WO15EMZ5-1 In-Wall Receptacle Outlet 15 amps, 1800W max 1/2 H.P. maximum, 120 VAC 600W max, 120 VAC - - PD300EMZ5-1 Smart EM Lamp Module n/a n/a 300W max, 120 VAC - PS15EMZ5-1 Smart EM Appliance Module 15 amps, 1800W max 15 amps, 1800W max 300W max, 120 VAC -
FS20Z-1 Fixture-Mounted Control Module -20 amps G.P. max, 277 VAC, 10 FLA, 60 LRA, 250 VAC
1 H.P. max, 120/240 VAC960 W max, 120 VAC, TV8 (Tungsten)
- -
WA00Z-1 Battery-powered Scene Controller None (does not control a load directly) - - -
GoControl Product Specification Chart
SMART ELECTRICAL
SMART SENSORS
SMART CONTROL
Part Number DescriptionZ-Wave Range(line of sight)
Operating Temp. Power/Battery Color Security Compatible Repeats Signal
WAPIRZ-1 Passive Infrared Motion Detector - Up to 100' 5° - 140° F 3 VDC/CR123A White -
WADWAZ-1 Door-Window Sensor - Up to 100' 5° - 140° F 3 VDC/CR123A White -
WA105DBZ-1 Siren/Strobe Warning Device - Up to 100' 5° - 140° FAC Powered with 6 VDC/NiMH (permanent cell)
White w/red lens GB00Z-2 Glass Break Sensor - Up to 100' 32° to 120° F 3 VDC/CR123A (2) White -
WF00Z-1 Water Leak Sensor Up to 130' 32° to 120° F 3 VDC/CR123A White -
Part Number DescriptionZ-Wave Range(line of sight)
Operating Temp. Power/Battery Color Security Compatible Repeats Signal
GD00Z-4Garage Door Opener Remote Controller Up to 130’ -4° to 122° F
Controller: 12 VDC from 120 VAC/60Hz power supply; Tilt Sensor: CR2032
Black
GC-TBZ48 Battery-powered Smart Thermostat - Up to 100' 32° to 120°F4 x ‘AA’; Can be powered by 24V HVAC “R” or “C” wire
Whitew/silver trim -
Part Number Description Brightness Light Appearance Energy Use Avg. Life Repeats Signal
LB60Z-1 Dimmable LED Standard Light Bulb (60-watt equivalent) 750 lumens 2700° K 9 watts 22.8 years (3 hrs./day) LBR30Z-1 Dimmable LED Flood Light Bulb (65-watt equivalent) 650 lumens 5000° K 7.5 watts 22.8 years (3 hrs./day) LB65R6Z-1 Retrofit Recessed LED Light Bulb Kit (65-watt equivalent) 650 lumens 2700° K 8.5 watts 22.8 years (3 hrs./day)
Part Number DescriptionIsolated Contacts/Resistive
Motor Incandescent Auto Sense Replaceable Trim Ring Repeats Signal
WD1000Z-1 In-Wall Dimmer Switch, 1000 W - n/a n/a1000W (installed lighting, no receptacles)
-
WD500Z5-1 In-Wall Dimmer Switch, 500 W n/a n/a500W (installed lighting, no receptacles)
-
WT00Z5-1 In-Wall Wireless “3-Way” switch None (does not control a load directly) - WS15Z5-1 In-Wall Switch 15 amps, 1800W max 1/2 H.P. maximum, 120 VAC 600W max, 120 VAC - WO15EMZ5-1 In-Wall Receptacle Outlet 15 amps, 1800W max 1/2 H.P. maximum, 120 VAC 600W max, 120 VAC - - PD300EMZ5-1 Smart EM Lamp Module n/a n/a 300W max, 120 VAC - PS15EMZ5-1 Smart EM Appliance Module 15 amps, 1800W max 15 amps, 1800W max 300W max, 120 VAC -
FS20Z-1 Fixture-Mounted Control Module -20 amps G.P. max, 277 VAC, 10 FLA, 60 LRA, 250 VAC
1 H.P. max, 120/240 VAC960 W max, 120 VAC, TV8 (Tungsten)
- -
WA00Z-1 Battery-powered Scene Controller None (does not control a load directly) - - -
SMART ELECTRICAL
PS15EMZ5-1
Smart EM Appliance Module
Remotely control devices with the EM Appliance Module. Plug in the tea kettle, light or small appliance and activate it on a schedule, from your phone or Smart Switch. And with Energy Monitoring capability, know how Green your appliances are performing. It will also light your path with an integrated LED night light.
• Energy Monitoring reports energy usage• Does not impede 2nd outlet• 15 Amp maximum capacity
FS20Z-1
Smart Fixture ModuleGoControl’s Isolated Contact Fixture Module can be mounted in a single- or multi-gang electrical box to operate loads or control relay-based devices. The relay can be isolated for dry contact applications or powered to switch live loads. This device can operate loads of up to 277v.
Possible Applications: Commercial Lighting, In-Ceiling Lighting/fans, Dry-Contact Relays, Pool Pumps, Water Heaters, Fireplaces.
PD300EMZ5-1
Smart EM Lamp Module
Quickly add dimmable control to a lamp with the EM Lamp Module. A simple plug-n-play device, lighting control has never been easier or Greener. It’s unique Energy Monitoring circuitry provides both a visual indication of the amount of energy being used, as well as reports it to the Z-Wave hub for reference. It will also light your path with an integrated LED night light.
• Energy Monitoring reports energy usage• Does not impede 2nd outlet
SMART SENSORS
WADWAZ-1
Smart Door/Window Sensor A two-piece sensor designed to be affixed to a door, window or other permanent fixture that opens and closes, such as a drawer, safe, or valuables storage cabinet. Once paired with a compatible Z-Wave hub, the sensor will report when the fixture has been opened or closed via wireless Z-Wave transmission.
Specifications• Maximum Sensor Gap: 0.75"• Supports External Contact: Yes• Long-life battery included• For non-life safety applications
WAPIRZ-1
Smart Motion DetectorOur Passive Infrared Motion Detector (PIR) is a wireless indoor security device that senses and reports motion activity and transmits alert signals via Z-Wave. The PIR conveniently delivers a low-battery alert signal when the battery needs replacement. The PIR also senses temperature changes and can trigger an alert based on specific changes to the room’s temperature.
Specifications• Motion Detection Range: 6' to 32'• Horizontal Coverage Angle:
120 Degrees• Temperature Change Alert: 2° F• Long-life battery included• For non-life safety applications
WA105DBZ-1
Smart Siren-Strobe AlarmOur combination Siren/Strobe Smart warning device alerts intruders of a security system presence. Once paired with a compatible Z-Wave hub, the sensor can be turned on or off remotely via the Z-Wave network. When on, the siren emits a very loud 105 dB alert tone and the integrated strobe flashes brightly.
The WA105DBZ-1 Siren/Strobe wall-mounts, and comes with a UL-approved AC plug-in power supply and offers an integrated battery backup, in case of AC power interruption.
Specifications• Siren Volume: 105 dB @ 1 Meter• Strobe Illumination: 4 white LED,
360 lumens• For non-life safety applications
Essential
Wireless Door-Window Sensors
Wireless Motion Detector
BOX INCLUDES:
• 2 QTY. DOOR-WINDOW SENSORS
• 1 MOTION DETECTOR
Home Security Suite
GC-DBC-1
Smart Doorbell Camera*
GB00Z-2
Smart Glass Break DetectorUsing your Z-Wave hub receive an alarm on your smart phone app if window breaking sounds are detected.
Features:• Always ready detection• Spatial detection of window shattering
sounds• Long-life battery included• Z-wave communications test button
With the GoControl Smart Doorbell Camera, you can see who is there, and answer your door on your smartphone app. Easy sale for professional installers.
WF00Z-1
Smart Water Leak SensorThe GoControl Smart Water Leak Sensor is great for multiple locations in your home— set one by your toilets, water heater, under sinks, and even near water-using appliances like washing machines and dishwashers.
Easy to install – battery powered: • Place sensor on the floor near potential
leak sources.• 10+ year battery life (battery included)• Great for second homes, while on
vacation, or when you’re away
SMART SENSORS
SMART CONTROL
• Fully weatherproof: Hermetically sealed, IP65 (Dust and water resistant)
• Wide-angle lens: 180 degrees, fisheye with fixed focal length, 6” to infinity
• Clearer audio: Two-way, built in speaker and microphone, active noise cancellation & echo reduction
GC-DBC-1 GoControl Doorbell Camera, WiFi Accessories:GC-DBC-C1 GoControl Wired Door Chime, WhiteGC-DBC-C2 GoControl WiFi Door Chime, WhiteGC-DBC-PS1 Plug-in Power Adapter, 120VAC, 16VAC OutputGC-DBC-PS2 Doorbell Transformer 16VAC, 30VAGC-DBC-FP GoControl Doorbell Camera Faceplate Kit: Bronze, Brass, White, CharcoalGC-DBC-T1 GoControl Doorbell Camera Test Tool
*Not supported directly by 2GIG Panel, uses stand-alone app.
SMART CONTROL
GC-TBZ48
Smart Battery-Powered Thermostat
GD00Z-4
Smart Garage Door ControllerOpens or closes garage door remotely through a Z-Wave hub/controller. Compatible with virtually any garage door opener/sectional door. Includes Tilt Sensor.
Specifications• Power: 120VAC, 50/60 Hz• Garage door position
sensor frequency: 345 MHz• Z-wave Frequency:
908.42 MHz
Features• Battery powered design
runs on 4 “AA” batteries• Extremely long 2 year
battery life• Can be powered by 24 VAC
“C” wire from HVAC system• Z-Wave compatible -
Ver. 4.5.5• Supports Z-Wave FLiRS
functionality
• Works on standard HVAC systems: 2 stage heat/ 2 stage cool
• Works on heat pump HVAC systems: 3 stage heat/ 2 stage cool
• Incredibly easy to install and program
• USB firmware upgrade ability• Wall mount or mounts on
single-gang junction box
Z-Wave Specifications• Range: Up to 130 feet
between the wireless controller and/or the closest Z-Wave receiver module
• Network wide inclusion• Security compatible• Scene: Command Class
Certifications• FCC, UL
Your family’s comfort, safety & security are all right at hand with GoControl.
Our sensors and control equipment help to protect and preserve the lifestyle you want to live, whether you’re relaxing at home, or away for a while. Live life richly and effortlessly with GoControl!
Copyright © 2017 Nortek Security & Control LLC. All rights reserved. GoControl is a registered trademark of Nortek Security & Control LLC. All other products or name brands are trademarks of their respective holders. Specifications and product availability subject to change without notice.
Nortek Security & Control
1950 Camino Vida Roble, Suite 150
Carlsbad, CA 92008
800.421.1587
nortekcontrol.com
235610F
Linear | NAPCO® Compatible Wireless Sensors
Compatible with all NAPCO® Receivers
Pet Immune Wireless PIR
Door / Window Wireless Sensor
• Vanishing Design• 5 Yr Lithium Battery• 7/8” Activation Gap
More Detailed Specs on Reverse Side
Glass BreakWireless Sensor
Recessed Door Sensor
• Compact Design• Rare Earth Magnet• 1.25” Activation Gap
WirelessPanic Remote
• Single Recessed Button• Neck/Wrist/Belt/Wall Clip Option• Breakaway Neck Lanyard
Wireless Key FOB
• Belt/Wall Clip Option• Resist Accidental Button Press• Tactile Button Feel
NAPPIRO1
NAPMDWO1
NAPGBO1
NAPRDWO1
NAPFOBO1
NAPPANO1
• Selectable 33/55Lb Pet Immunity• 30’ x 50’ Detection Area• Corner / Wall Mount Bracket
• 2-Stage Detector Circuit• 12ft/360 Degree Coverage• Built-in Glass Break and RF Test
Linear | NAPCO® Compatible Wireless Sensors
Linear LLC | 1950 Camino Vida Roble | Suite 150 | Carlsbad, CA 92008 | 800.421.1587 | www.linearcorp.com | 235140X5
Compatible with all NAPCO® Receivers
NAPFOB01 Wireless Key FOB
Battery Life: 3 years Battery: (2) CR2025 LithiumTX Range: Up to 300 feetSize: 2.5 x 1.2 x 0.375 in (H x W x D)Accessories: Visor Clip, Belt clipOrder No: NAPFOB01
NAPGB01 Glass Break Wireless Sensor
Battery Life: 3 years Battery: 2 x CR123ADetection Range: 12ftTX Range: Up to 500 feetSize: 4.625 x 1.875 in (D x H)Accessories: ScrewsOrder No: NAPGB01
NAPMDW01 Door / WindowWireless Sensor
Battery Life: 5 years Battery: CR2032Range: Up to 500 feetSize: 1.5 x 1.0 x .375 (H x W x D)7/8” Wide GapAccessories: Double Sided Tape, ScrewsOrder No: NAPMDW01
NAPRDW01 RecessedDoor Sensor
Battery Life: 5 yearsBattery: CR2Range: Up to 500 feetSize: 0.75 x 2.5 in (D x H)1.25” Wide GapAccessories: Mounting Screws, Screw Secured CoverOrder No: NAPRDW01
NAPPIR01 Pet Immune Wireless PIR
Battery Life: 5 years Battery: CR123A33Lb or 55Lb Pet Immune DetectionDetection Area: 30 ft x 50 ftTX Range: Up to 500 feetSize: 3.5 x 2.3 x 1.9 in (H x W x D)Accessories: Screws, Corner and Wall Mount BracketsOrder No: NAPPIR01
NAPPAN01 Wireless Panic Remote
Battery Life: 3-5 years Battery: CR2032Range: Up to 300 feetSize: 2.5 x 1.2 x .375 (H x W x D)Accessories: Breakaway Lanyard, Belt Clip, Wrist BandOrder No: NAPPAN01
NAPCO is a trademark of Napco Security Technologies, Inc
Linear | Interlogix® Compatible Wireless Sensors
Compatible with all Interlogix Receivers
Pet Immune Wireless PIR
Door / Window Wireless Sensor
Door / Window Wireless Sensor
Recessed Door Sensor
• Selectable 33/55Lb Pet Immunity
• 30’ x 50’ Detection Area• Corner/Wall Mount Bracket
Works with all Wireless Interlogix Alarm Panels
- Simon
- NX Series
- Concord Series
More Detailed Specs on Reverse Side
Glass BreakWireless Sensor
• 2 Stage Detector Circuit• 12ft/360 Degree Coverage• Built-in Glass Break and
RF Test
Wireless Key FOB
• Belt/Wall Clip Option• Resist Accidental
Button Press• Tactile Button Feel
ITIRDW01
ITIDWA01 Compatibility
ITIMDW01 ITIPIR01ITIFOB01
ITIGLB01
• Compact Design• Rare Earth Magnet• 1.25” Activation Gap
• Vanishing Design• 5 Yr Lithium Battery• 7/8” Activation Gap
• Slim Design• Aux Input• 7/8” Activation Gap
Linear LLC | 1950 Camino Vida Roble | Suite 150 | Carlsbad, CA 92008 | 800.421.1587 | www.linearcorp.com | P/N
Linear | Interlogix Compatible Wireless Sensors
Linear LLC | 1950 Camino Vida Roble | Suite 150 | Carlsbad, CA 92008 | 800.421.1587 | www.linearcorp.com | 235141X5
Compatible with all Interlogix Receivers
ITIFOB01 Wireless Key FOB
Battery Life: 3 years Battery: (2) CR2025 LithiumTX Range: Up to 300 feetSize: 2.5 x 1.2 x 0.375 in (H x W x D)Accessories: Visor Clip, Belt clipOrder No: ITIFOB01
ITIGLB01 Glass Break Wireless Sensor
Battery Life: 3 years Battery: 2 x CR123ADetection Range: 12ftTX Range: Up to 500 feetSize: 4.625 x 1.875 in (D x H)Accessories: ScrewsOrder No: ITIGLB01
ITIMDW01 Door/WindowWireless Sensor
Battery Life: 5 years Battery: CR2032Range: Up to 500 feetSize: 1.5 x 1.0 x .375 (H x W x D)7/8” Wide GapAccessories: Double Sided Tape, ScrewsOrder No: ITIMDW01
ITIDWA01 Door / WindowWireless Sensor
Battery Life: 5 years Battery: 2 x CR2032TX Range: Up to 500 feetAccessories: ScrewsOrder No: ITIDWA01
ITIRDW01 RecessedDoor Sensor
Battery Life: 5 yearsBattery: CR2Range: Up to 500 feetSize: 0.75 x 2.5 in (D x H)1.25” Wide GapAccessories: Mounting Screws, Screw Secured CoverOrder No: ITIRDW01
ITIPIR01 Pet Immune Wireless PIR
Battery Life: 5 years Battery: CR123A33Lb or 55Lb Pet Immune DetectionDetection Area: 30 ft x 50 ftTX Range: Up to 500 feetSize: 3.5 x 2.3 x 1.9 in (H x W x D)Accessories: Screws, Corner and Wall Mount BracketsOrder No: ITIPIR01
Common Specifications
Frequency: 319.5MhzOperating Temperature: -5° to 55° COperating Relative Humidity: 5 to 90%, non-condensing
Interlogix is a trademark of Interlogix,Inc., a United Technologies Corporation.
Dual diversity superheterodyne technology.
Up to 1,500 foot line-of-sight range.
4 and 8-channel models for North American andEuropean markets.
Compatibility with nearly 40 different Linear DX and DXS series transmitters.
DXSR 1500 SERIES SUPERVISED RECEIVERSThe ultimate receivers
for adding wireless security.
®
There are a lot of reasons to add wireless
functions to a hardwire security panel.With
Linear’s DXSR 1500 series receivers, there are
also plenty of incentives. Security installers
can offer many valuable enhancements to the
alarm systems of present customers.And they
can attract more new business by offering a
state-of-the-art hybrid product.
What makes
DXSR 1500
series
receivers so
advantageous
is dual
diversity
superhetero-
dyne technolo-
gy that makes
possible
a measured
line-of-sight
range of up
to 1,500 feet.
Detached
garages, poolhouses, and other outbuildings that
were previously hard or impossible to protect
are now easily tied in using Linear’s wireless
sensors. Remote controls and panic button
functions can be added via Linear personal
transmitters in any style. Collectively, our DX
and DXS series represents industry’s most
extensive line — there are 39 models to choose
from, including pendants, keyrings, handhelds,
wristbands, door/windows, PIRs, smokes, glass
breaks, and bill traps.With our 8-channel DXSR
1508 receivers, up to 32 transmitters can be
distributed between channels.
Configuring new wireless security loops is
simple, thanks to quick-learn programming, a
7-segment channel display, and the per-channel
flexibility of selectable supervision and custom
output options.The channel display lights a
flashing center dash in Power On and Standby
conditions, a channel ID during an Alarm condi-
tion, and a decimal point to signal RF activity.
Additional outputs include per-channel Alarm,
common Low Battery, and common Status, with
LED indicators
for each.The
DXSR 1500
series even
comes in a
choice of
capacities and
frequencies:
4-channel or
8-channel
models for the
United States
(315 MHz)
or Europe
(433.92 MHz).
Creating wireless/hardwirehybrids is easy (and rewarding)
with DXSR 1500 seriesreceivers.
Non-Supervised Portable Transmitters, 315 MHz
PRODUCTMODEL NUMBER DESCRIPTION
DXT-21 SNT00376 2-Button, 1-Channel HandheldDXT-23 SNT00377 3-Button, 4-Channel HandheldDXT-25 SNT00378 5-Button, 8-Channel HandheldDXT-41 SNT00381 1-Button, 1-Channel Mini/KeyringDXT-42 SNT00382 2-Button, 3-Channel Mini/KeyringDXT-61A SNT00380A 1-Button, 1-Channel Pendant
Non-Supervised Stationary Transmitters, 315 MHz
PRODUCTMODEL NUMBER DESCRIPTION
DXT-31 SBT00014 Door/Window TransmitterDXT-54 SBT00013 Passive Infrared Motion DetectorDXT-72 SNA00356 Photoelectric Smoke DetectorDXT-72/K SNA00364 Photoelectric Smoke Detector
(for Canada)DXT-81 SNT00383 Bill TrapDXT-91 SNA00363 Glass Break
Supervised Portable Transmitters,433.92 MHz (EC Versions)
PRODUCTMODEL NUMBER DESCRIPTION
DXS-62/EC SST00092 Supervised 1-Button, 1-Channel Waterproof
DXS-63/EC SST00093 Supervised 2-Button, 3-Channel Waterproof
Supervised Stationary Transmitters,433.92 MHz (EC Versions)
PRODUCTMODEL NUMBER DESCRIPTION
DXS-31/EC SST00085 Supervised Door/Window Transmitter
DXS-54/EC SST00086 Supervised Passive Infrared Motion Detector
DXS-72/EC SST00087 Supervised Photoelectric Smoke Detector
DXS-91/EC SSA00017 Supervised Glass Break
Non-Supervised Portable Transmitters,433.92 MHz (EC Versions)
PRODUCTMODEL NUMBER DESCRIPTION
DXT-21/EC SNT00389 2-Button, 1-Channel HandheldDXT-23/EC SNT00388 3-Button, 4-Channel HandheldDXT-41/EC SNT00365 1-Button, 1-Channel Mini/KeyringDXT-42 SNT00366 2-Button, 3-Channel Mini/KeyringDXT-61/EC SNT00391 1-Button, 1-Channel Pendant
PRODUCTMODEL NUMBER DESCRIPTION
DXSR-1504 SSR00070 4-Channel, 315 MHz, Supervised Receiver (for United States and Canada)
DXSR-1504/EC SSR00072 4-Channel, 433.92 MHz, SupervisedReceiver(for Europe)
DXSR-1508 SSR00071 8-Channel, 315 MHz, Supervised Receiver (for United States and Canada)
DXSR-1508/EC SSR00073 8-Channel, 433.92 MHz, Supervised
Receiver(for Europe)
Available Models
Compatible Transmitters
Supervised Portable Transmitters, 315 MHz
PRODUCTMODEL NUMBER DESCRIPTION
DXS-21 SST00094 Supervised 2-Button, 1-Channel Handheld
DXS-23 SST00095 Supervised 3-Button, 4-Channel Handheld
DXS-25 SST00096 Supervised 5-Button, 8-Channel Handheld
DXS-62 SST00090 Supervised 1-Button, 1-Channel Waterproof
DXS-63 SST00091 Supervised 2-Button, 3-Channel Waterproof
Supervised Stationary Transmitters, 315 MHz
PRODUCTMODEL NUMBER DESCRIPTION
DXS-31 SST00073 Supervised Door/Window Transmitter
DXS-54 SST00074 Supervised Passive Infrared Motion Detector
DXS-72 SST00076 Supervised Photoelectric Smoke Detector
DXS-72/K SST00077 Supervised Photoelectric Smoke Detector (for Canada)
DXS-81 SST00078 Supervised Bill Trap
DXS-91 SSA00015 Supervised Glass Break
Specifications
Number of Channels:DXSR-1504; DXSR-1504/EC: 4 channels, supervisedDXSR-1508; DXSR-1508/EC: 8 channels, supervised
Receiver Type: diversity, dual superheterodyne
Carrier Frequency:North American: 315 MHzEuropean: 433.92 MHz
Bandwidth: 200 KHz typical
Receiver Sensitivity: -102 dBm typical at each antenna
Data Formats: Linear DX
Modulation: type A1D, PPM (pulse position modulation)
Measured Range: 1,500 feet, typical, with most standard LinearDXT or DXS stationary transmitters
Transmitter Capacity: 32 total with any distribution betweenchannels (note: learning multiple transmitters into any channelwill defeat device supervision)
Receiver Outputs:DXSR-1504; DXSR-1504/EC: 4 channel Alarm outputs,1 common Low Battery output, and 1 common Status outputDXSR-1508; DXSR-1508/EC: 8 channel Alarm outputs, 1common Low Battery output and 1 common Status output
Output Type:Mode: factory set to normally open; can be globally selectedas normally closed by internal jumperCurrent Rating: 100 mA maximum per output point
Channel Output Options: 3 output options, field selectableby channelMomentary: 3/4-second momentary closure on alarmToggle: alternate alarm action; toggle on, toggle offLatch: requires manual reset at the receiver or operates as a follower with door/window transmitters; latches “on”with open (Alarm) condition; latches “off” with closed(Restore) condition
Display Output:Channel Display: 7-segment LED indicator; displays flashingcenter dash in Power On and Standby; displays channel IDduring Alarm condition, along with Alarm condition LED;automatically clears when Alarm output restores; displays “P”,channel ID, and number of learned transmitters in each channel during programming modeRF Activity: indicated by decimal point on 7-segment display; indicates radio receiver activity; flashes with received dataAlarm Condition: 3 LED indicators — Alarm, Low Battery,and Status
Operating Voltage: 10.2 to 14.4 Vdc or 12 to 16 Vac
Operating Current:Standby: 30 mAAlarm: up to 120 mA
Operating Temperature: 0 to 60°C (32 to 120°F)
2055 Corte Del Nogal, Carlsbad, CA 92009 (760) 438-7000 (800) 421-1587 Fax (800) 468-1340
www.linearcorp.com
Copyright 1999, Linear Corporation 98-226 P/N 216512A Printed in U.S.A.
Dimensions: 7.25 in W x 5.00 in H x 1.00 in D (185.00 x127.00 x 25.40 mm)
Space Required for Installation: 7.50 in W x 14.0 in H
Antennae: 2 - 9.50 in wire whip antennas (supplied)
Mounting Hardware: 4 - #6 1.25 in wood screws (supplied)
Receiver Operating Parameters:Status Supervision: monitored on each channel for hourlystatus transmissions; reports status exception if no transmis-sions received within last 8-hour time period; 1 commonStatus output provided for all channels; 7-segment displayindicates channel where violation occurred; exception set and cleared by channelEnable Options: Status supervision can be enabled on perchannel basis by cutting appropriate jumper per channel;factory default is disabled (note: with Status supervision monitoring, more than one transmitter should not be learnedper channel)Low Battery Supervision: monitors each transmitter forLow Battery alarm; reports if any learned transmitter LowBattery signal is received; one common Low Battery alarmoutput provided for all transmitters; 7-segment display indicates channel where Low Battery occurred; Low Batteryset and cleared by individual transmitters; transmitter that has sent Low Battery report must send Good Battery signal to clear Low Battery conditionProgram Mode: enabled by program jumper; remote toenter program modeTransmitter Learn: momentary press and release desiredChannel Learn button (activate transmitter within 5 secondsto learn it into desired channel)Memory Interrogation: hold appropriate channel’s Learnbutton for less than 5 seconds; 7-segment display will indicatenumber of devices learned into the selected channelMemory Erase: hold appropriate channel’s Learn button formore than 10 seconds and then release; transmitters learnedinto that channel will be erased from receiver memory
Specifications subject to change without notice.
TYPICAL 4-ZONECONTROL PANEL
CONNECTION
DXS-80
The DXS-80 is a UL listed†, single station, carbon monoxide alarm with a built-in supervised transmitter. It is compatible with Linear’s wireless DXS Format Security Systems, Personal Emergency Reporting Systems (PERS), and other stand-alone receivers. The DXS-80 provides a warning to alert against both the acute and chronic effects of carbon monoxide (CO) poisoning.
When carbon monoxide is detected, the alarm sounds a loud local alarm. The built-in transmitter sends a digitally coded wireless signal to its companion receiver every 20 seconds until the air has cleared and the detector is restored.
The local alarm can be silenced once by pressing the test/reset button. The transmitter will continue to send an alarm signal every 20 seconds. After 7 minutes, the alarm will sound again if there is still an unsafe carbon monoxide concentration level. The reset function can be used only once for each alarm occurrence.
No field coding is required because the DXS-80 is factory set to a unique code; one of over a million possible codes.
The DXS-80 is powered by one 3-volt lithium battery. The battery is supplied and can power the unit for up to the six year life of the detector. If the battery voltage drops below a preset level the alarm will sound a low battery chirp every 45 seconds and a low battery signal will be sent to the receiver.
At about 6 years, the carbon monoxide detector element will reach the end of its serviceable life. The self-supervising detector will signal a permanent trouble condition, indicating time for replacement.
SPECIFICATIONS
REGULATORY LISTINGS: UL2034
DETECTION METHODS: Electrochemical
TIME TO ALARM PER UL 2034:
Carbon Monoxide Concentration Level
Minimum Time to Alarm
Maximum Time to Alarm
50 ppm +/-5 ppm 30 days Indefinite
70 ppm +/-5 ppm 60 min 240 min
150 ppm +/-5 ppm 10 min 50 min
400 ppm +/-5 ppm 4 min 15 min
AUDIBLE OUTPUT: 85 dBA/10'
OPERATING TEMP. RANGE: 32º-100º F
POWER: 3-Volt battery (Lithium Type 123A) (UL tested for greater than 1 year service life)
CURRENT: 7 mA alarm average, 15 µA standby
FREQUENCY: 315 MHz
NUMBER OF CODES: One of 1,048,576 possible codes
DIMENSIONS: 5.3" diameter, 2.0"h
COMPATIBLE RECEIVERS†: PERS-3600 PERS-2400A DXSR-1504 DXSR-1508 DVS-1200 DXR-702 DUAL-824 DVS-2400
Model DXS-80(SST00116)
Carbon Monoxide Alarm
Wireless Carbon Monoxide Alarm
,
,
A
Model DXR-702(SNR00149)
2-Channel Receiver
Also available as a kit:DX-COKIT(SSA00020)
Kit contains one DXR-702 receiver with a DXS-80 already learned into
the receiverNOTE: The DX-COKIT is not for use
in UL Listed applications† The DXS-80 is currently UL Listed for use with the Linear PERS Consoles only. It has not been tested by UL with other compatible Linear receivers.
DXS-80
DXR-702
Security Alarm Panel
DX-COKIT
The DX-COKIT is an excellent way to add CO protection to new or existing security alarm panels
Security Alarm Panel Requirement:Available input(s) which can accept a dry N.C. or N.O. contact
DX-COKIT
• Includes one DXS-80 CO Detector and one Linear DXR-702 Receiver, with the DXS-80 already learned into the receiver
• Interconnects to any Security Alarm Panel that can accept a dry N.C. or N.O. contact for a zone input
• Perfect for installations that require one CO detector
For applications requiring more than one CO detector, Linear recommends and offers the following product solutions:
NOTE: When multiple CO detectors are required for an application, Linear recommends that each CO detector be assigned to its own receiver channel to assure proper device supervision and reporting.
Number ofCO Detectors
Linear Receiver
Notes
1 DXR-702 Use the Linear DX-COKIT
1 to 4 DXSR-1504 Purchase the required number of DXS-80 Detectors
1 to 8 DXSR-1508 Purchase the required number of DXS-80 Detectors
Copyright © 2008 Linear LLC Printed in China 228209 AX2
USA & Canada (800) 421-1587 & (800) 392-0123(760) 438-7000 - Toll Free FAX (800) 468-1340
www.linearcorp.com
NOTE: The DX-COKIT is not for use in UL Listed applications