www.norglass.com.au (02) 9708 2200 (07) 3841 0977Telephones: Facsimile: (02) 9796 3069

SPECIALTY FINISHES

PROTECTION FOR: • HOME • CARS • CARAVANS • BOATS • TRAILERS • FLOORS

NORGLASSNORGLASSSURFACE COATINGS

CATALOGUE 2014

Visit us Online

The aircraft is a Royal Aircraft Factory BE2a circa 1912. The Australian Army operated two of this type of aircraft from 1914-18 at their Central Flying School at Point Cook. This is now at RAAF Williams Point Cook and is the oldest continuously operating military airfield in the world.

Every wooden part of this construction (except the propeller) has been preserved using Norglass Norseal Wood Treatment System and the exhibit is expected to last for about 30 years without major restoration work, with the wood parts preserved indefinitely.

Norglass thanks the RAAF Museum and Andrew Willox for use of this photo.

This aircraft was constructed by Andrew Willox of Victoria, and was given as a gift to the Royal Australian Air Force to be on display at the RAAF Museum, on the occasion of the centenary of Australia’s first military flight. Exhibited at Point Cook, March 2014”.

This customer of Paint Place Centenary (Brisbane) coated their driveway and paths with Norglass Slip-Resistant Paving Paint - Terracotta.

Australian Made Australian OwnedPAINT MANUFACTURERS

IntroductionAUSTRALIAN MADE

Norglass manufacturing over the past 4 decades have developed a comprehensive range of paints and surface treatment

products that are simply... “the best of the best”. Each raw material is selected for its performance characteristics, not the price. The management philosophies decree that quality is the path to success - not quantity.

AUSTRALIAN OWNED

Norglass is a family owned business that is committed to keeping our money in Australia and preserving Aussie jobs.

TECHNICAL ASSISTANCE

Norglass products are produced to cope with extreme circumstances. The research explores all of the difficult problem areas of

maintenance and sets out to formulate solutions. The result: A composite range of products to deal with these situations. Our website www.norglass.com.au is packed with advisory information on most surfaces in easy to understand language. Product Fact Sheets - Material Safety Data Sheets - “How To Do It” Guides on various surfaces. FOR PRODUCT AVAILABILITY (via our website) www.norglass.com.au Insert your post code for your nearest stockist or contact Norglass direct as shown on the back page.

NORGLASSNORGLASS SPECIALTY FINISHES

Australian Made – Australian Owned

NORGLASSNORGLASSNORGLASSNORGLASS

PRODUCT SELECTION GUIDE

NORSE

AL

PRi-C

OAT

SHIPSH

APE

WEA

THER

FAST ENA

MEL

DEC

K PAINT

SHIPSHAPE

METAL ETC

H CLEANER

SLIP RES

IST. PAVING

PAINT

SLIP RES

IST. PAVING

PAINT

NORSH

IELD

NoR

UST

SHIPSH

APE

WEA

THER

FAST ENA

MEL

DEC

K PAINT

METAL ETC

H CLEANER

SHIPSH

APE

NoR

UST

PRi-C

OAT

WEA

THER

FAST ENA

MEL

SHIPSH

APE

WEA

THER

FAST ENA

MEL

DEC

K PAINT

PREM

IUM TIMBER

OIL

NORSE

AL

POLY CLEAR GLO

SS

POLY CLEAR SATIN

WEATHE

RFAS

T MAR

INE V

ARNISH

SLIP RES

IST. PAVING

PAINT

NORTH

ANE GLO

SS

NORTH

ANE GLO

SS

NORTH

ANE GLO

SS

NORTH

ANE GLO

SS

NORT

HANE

CLEAR

GLO

SS

TIMBER - PLYWOOD - MDF - CHIPBOARD STEEL ALLOYS FIBREGLASS CLEARSCONCRETE

FLOORSDRIVEWAYS

HOW TO USETHIS CHART

UNTREATED UNTREATED

PREVIOUSLY COATED PREVIOUSLY COATEDPRIMERS PRIMERS

UNDERCOATS UNDERCOATS

FINISHING COATS FINISHING COATS

Note: As an approximate guide to coverage, estimate 10 square metres per litre, per coat, for most products.

All Norglass paint finishes are shown on the can lids, illustrating actual colours, textures and gloss levels.

1. Select your surface from these panels

2. Select untreated, or previously coated and pick desired primer.

3. Choose the undercoat.4. Choose the finish coating.

2

NOTE: The ticks within a white circle above, denote high perfomance 2 pack products which are suitable for areas including those of continuous immersion.

YOUR NEXT MAINTENANCE PROJECTRead thoroughly, all directions and manufacturers statements on the products to be used. Research any technical material on the makers website, because most items only have limited space on the labels and packaging.Follow all directions carefully and do not mix brands or substitute other solvents. Use only those specified by the manufacturer.Finally, get professional advice only from a reputable supplier and cross reference these statements with those of the manufacturer, as sometimes the given advice can be incorrect.

IGNORE BACKYARD ENDORSEMENTS.

Visit us Online

Fillers / Glues / Resins

3

NORGLASSNORGLASSSPECIALTY FINISHES

Australian Made – Australian Owned

STAYBOND EPOXY GLUE Easy to use 2 pack glue. Solventless and non staining with exceptional strength. Bonds to most prepared surfaces. Timber, metals, fibreglass, concrete, fibro, ceramics and glass. It is totally waterproof when cured.

Excellent gap filling and non sagging characteristics.COLOUR: Cream when mixed.SIZES: 38kg, 7.6kg, 3.8kg, 1.9kg, 950g, 470g and 200g packs.MIXING RATIO: 1:1 by volume.

LIQUID GLASS EPOXY RESINSolventless, water-clear pour-on gloss finish for bar and table tops. Gives a “clear liquid coating” that can be used for découpage applications.Other uses are for laminating

fibreglass, Dynel and other reinforcing composites. Excellent adhesion, flexibility and abrasion resistance. COLOUR: Water-clear when mixed.SIZES: 30L, 15L, 6L, 3L, 1.5L and 750ml packs.MIXING RATIO: 2:1 by volume.APPLY: Brush - Roller - Pour-on.

POLYESTER RESIN General purpose waxed fibreglassing resin. Ideal for waterproofing shower bases, roof guttering, boat and caravan repairs. Requires Norglass Polyester Catalyst for curing (see below).

COLOUR: Blue, but cures to hazy amber colour.SIZES: 20L, 4L, 2L, 1L, 500ml and 250ml.MIXING RATIO: 1-4% by volume of Catalyst.APPLY: Brush - Roller.

POLYESTER RESIN CATALYST Reactive agent used to promote the setting (curing) of Norglass Polyester based products. Mixing ratio is 1-4 percent of the resin volume.

SIZES: 500ml, 80ml, 40ml and 20ml.

NEWPRODUCT

This plank was embedded with 2 fishing lures then filled with Liquid Glass, for decoration.

Area Forumla: 1 mixed litre = 1,000 cubic cmTherefore: 1 sq. metre @ 1mm thick = 1 litre

NORFILL EPOXY FILLER A paste-like white, waterproof filler that can be sanded and left as a finish, or painted over. It has excellent non-sagging properties so that even large cracks or holes can be filled in one application. Norfill is solventless and does not shrink, making it the perfect filler where strength and adhesion is important.

May be applied to all prepared surfaces and will not react with other coatings or treatments. The finished product can be drilled and tapped where desired.COLOUR: White.SIZES: 4kg, 2kg, 1kg, 500g and 250g packs. MIXING RATIO: 2:1 by volume.

NORFLEX EPOXY FILLER A lighter more flexible version of Norfill for large areas of cosmetic filling where movement and flexing are important. Offers a 25% weight saving by mass over Norfill.

Superb gap filling and sanding qualities.COLOUR: Cream when mixed.SIZES: 3kg and 750g packs. MIXING RATIO: 2:1 by volume.

NORSYSTEM BOAT EPOXY RESIN

A clear waterproofing epoxy resin for the boatbuilding and surfboard industries.Solventless and non shrinking. Can be extended with Norglass Microtalc, or where weight saving is important, Norcells blended extender.Norsystem resin can also be used as a flexible sealer where a clear finish is desired. Ideal as a reinforcing resin for fibreglass, Dynel and other composites.Base and hardeners are supplied in colour coded packs to avoid confusion. There are options for slow or fast hardeners to cater for local temperature conditions.COLOUR: Clear.SIZES: 24 litre packs, 6 litre packs, 3 litre packs, 1 litre packs.MIXING RATIO: 3:1 by volume.

NORSYSTEM RESINS ARE CERTIFIED BY LLOYDS OF GERMANY

This plank was embedded with 2 fishing lures then filled

Sealers / Primers / Undercoats

NORGLASSNORGLASS SPECIALTY FINISHES

Australian Made – Australian Owned

WEATHERFAST PRI-COAT Primes as it undercoats.A heavy-bodied low odour primer and undercoat combined. For use on timbers, wall cladding, concrete and many other surfaces.It is fine textured for easy sanding and

provides a dense off white colour for fast finishing.Not suitable for areas of constant immersion.COLOUR: Off White.SIZES: 10L, 4L, 2L, 1L, 500ml, 250ml & 100ml. APPLY: Brush - Roller - Spray.

NORSHIELD ANTI-CORROSIVE PRIMER Red oxide primer for ferrous metals. Bound into a high strength 2 pack epoxy resin coating for maximum durability. Ideal for all steel surfaces from high rise to underwater use.Excellent film build characteristics.

COLOUR: Red oxide.SIZES: 4L, 1L, and 500ml packs.APPLY: Brush - Roller - Spray. MIXING RATIO: 3:1 by volume.

SHIPSHAPE PRIMER-UNDERCOAT The ultimate high-build performance coating to obliterate background irregularities and provide filling properties prior to coating with single or 2 pack finishes. Suitable for areas of continuous immersion and osmosis repairs. Commonly used as a primer-undercoat for non ferrous metals and as a topcoat in the bilge areas of boats because of its

satin gloss finish.COLOUR: White & Grey.SIZES: 4L, 2L, 1L and 500ml packs.MIXING RATIO: 3:1 by volume.APPLY: Brush - Roller - Spray.

WEATHERFAST PREMIUM TIMBER OIL Modified low odour synthetic resin coating for feeding the timber where a natural grain appearance is desired.Contains U/V inhibitors for additional protection. Fast drying and does not leave a greasy film. Excellent penetration into open grained woods. For use on decks, floors, and furniture.

COLOUR: Pale Amber.SIZES: 20L, 4L, 1L and 500ml.APPLY: Brush - Cloth pad - Roller.

Red oxide primer for ferrous metals. Bound into a high strength 2 pack epoxy resin coating for maximum durability. Ideal for all steel surfaces from high rise to underwater use.Excellent film build characteristics.

C Red oxide.

NORSEAL WOOD TREATMENT Low viscosity epoxy solution designed to penetrate, seal and waterproof particle boards and timbers. Recommended to be overcoated with a primer such as Shipshape within

4 weeks of application. In permanently shaded areas Norseal can alternatively be coated with a clear finish.COLOUR: Clear when mixed.SIZES: 40L, 8L, 4L, 2L, 1L and 500ml packs.MIXING RATIO: 1:1 by volume.APPLY: Brush - Roller.

ALL SURFACE PRIMER (NORUST)Very fast drying stain sealing primer, with excellent corrosion inhibiting pigments for ferrous and non-ferrous metals. Because of its outstanding adhesion to almost every surface NoRUST is the preferred multi-purpose

coating for most paint systems. 20 minute drying - rapid recoating. Not suitable for areas of continuous immersion.COLOURS: Red, White and Grey.SIZES: 10L, 4L, 2L, 1L, 500ml, 250ml, 100ml (white).APPLY: Brush - Roller - Spray.

METAL-ETCH PREP-CLEANERA specifically designed metal conditioner for pre-treating bare aluminium, galvanised iron and other non ferrous alloys such as brass, copper and bronze. Easy to use. Brush on and wash off.Thixotropic gel is designed to hold the

product on vertical surfaces. Stirring or shaking the contents converts METAL-ETCH into a liquid for hard to reach areas. This product is also an excellent rust remover on steel.COLOUR: Green Gel.SIZES: 4L, 1L and 500ml.APPLY: Brush - Roller - Sponge.

NORTHANE TESTIMONIALReceived December 24th 2013.

“To the chief technical man, who over several years, has given excellent advice when I call, (even against your own interests). A couple of years ago you advised me to use Northane inside my boat fridge. Unlike the previous epoxy advised by and used from another manufacturer it was bubble free, absolutely odour free, and first rate in every way.In the kitchen area of our factory we have a bench. It gets very hard wear, boiling water, hot pans, knives, spills, burnt toast etc, and the melamine had worn through in several spots. As I had some left over mix I gave the bench a wash (degrease) and a 5 minute rough sand, then brushed on a coat on top of the melamine. I kept the rest of the mix overnight in the fridge and gave it a second coat in the morning. It’s a pretty rough finish, but smooth and glossy enough. That was 2 years ago… apart from a couple of almost invisible stains from tea mugs its still glossy, hasn’t lifted or peeled anywhere, and is far tougher

than the melamine. Well done and all the best for the years to come.P.S. One of my friends was so impressed that he repainted the whole top sides of his S and S 34 with it and is delighted with the result”.Brian Smith

Finish Coats

Australian Made – Australian Owned

SPECIALTY FINISHES NORGLASSNORGLASS

NORTHANE ULTRA HIGH GLOSSThe premium finish two-pack polyurethane for durability and fade resistance. Excellent chemical, waterproofing and weathering properties. Ideal for refurbishing most surfaces. Home, leisure, commercial industrial and automotive. Unlimited range of factory colours upon request (extra fee applies). COLOURS: 17 standard plus Black and White. SIZES: 10L, 4L, 2L*, 1L, and 500ml packs.

MIXING RATIO: 2:1 by volume.APPLY: Spray - Brush - Roller.*2L size only available in White.

WEATHERFAST PREMIUM GLOSSModified polyurethane low odour paint to produce the highest quality marine grade gloss enamel. For use on prepared steel, aluminium, concrete, timber and other surfaces where performance and durability is paramount. Not suitable for areas of continuous immersion.

COLOURS: 17 standard plus Black and White. *(colours not available in 10L, 2L).SIZES: 10L, 4L, 2L, 1L, 500ml and 250ml.APPLY: Brush - Roller - Spray.Also in 100ml size, White - Black - F. Red - A. Blue, M. Yellow - Orange - B. Blue - V. Green.

WEATHERFAST SATIN WHITEDurable interior - exterior modified low odour polyurethane. Ideal for surfaces where less reflected light is desirable. Has a classic finish look.Not suitable for areas of continuous immersion.COLOURS: White only.SIZE: 10L, 4L, 2L, 1L, 500ml & 250ml.APPLY: Brush - Roller - Spray.

WEATHERFAST MARINE DECK PAINTUnique slip resistant coating incorporating plastic granules to provide a uniform paint film for traction when wet. The profile also facilitates easy cleaning. For use on fibreglass, steel, concrete, timber and aluminium decks.

COLOURS: 7, Arctic White, Shoreline Cream, Horizon Blue, Squall Grey, Misty Grey, Cream, Seashell.SIZES: 4L, 1L and 500ml.APPLY: Brush - Roller - Spray.

PAVING PAINT (SMOOTH)COLOURS: Terracotta - Sand - Saltbush Green - Slate - Pewter - Ivory - Russet - Clay - Bronze Earth - Lincoln Green and Ironbark. SIZES: 10L and 4L.APPLY: Roller - Brush - Spray.

Presented to Ms Evelyn Pearce following her original rendition of Peter Dodds-McCormick’s “Advance Australia Fair”(in pencil draft) in the 1890’s.Handed down through generations to the Norglass Directors and lovingly maintained in Weatherfast Premium Enamel Port Wine.

5

THE “ADVANCE AUSTRALIA FAIR” SEAT

PAVING PAINT (TEXTURED FINISH)Fast drying low sheen finish that provides traction, cushioning and durability. Plastic granules produces a uniform texture to reduce overall wear. Easily recoated and accepts light domestic traffic after 8 hours. Commercial usage after 48 hours.

COLOURS: Terracotta - Sand - Saltbush Green - Slate - Pewter - Ivory - Russet - Clay - Bronze Earth - Lincoln Green and Ironbark. SIZES: 20L, 10L, 4L and 1L.APPLY: Roller - Brush - Spray.

NORTHANE TESTIMONIALReceived 18th October 2012

“Several weeks ago I began what I now realise was quite a big project in my home which involved removing, sanding and painting my vinyl wrapped kitchen and bathroom cupboards and drawers.Shipshape primer and Northane was recommended for the job but as a complete novice I needed quite a bit of advice. I phoned your factory and spoke to Brett several times (in fact, probably at least half a dozen times!) to ask for assistance and advice on how best to use your products.I would like to sincerely thank him for his courtesy, knowledge and patience. Never once did he show any sign of annoyance at my rather constant calls over the few days and was extremely knowledgable on the preparation and use of the paints I was using. Even your receptionist, Mel, was pleasant each time I phoned and never once made me feel like a nuisance.I hope this can be passed on to management so that the company is aware of the great job done by those who are the public face of the company. Based on the service I received I would recommend your products to others.I sincerely thank Brett for his help - I’m still putting the cupboards back on but the finish looks great and I am really pleased with the outcome.” Ms. H. Martin

Clears / Thinners

6

Australian Made – Australian Owned

SPECIALTY FINISHESNORGLASSNORGLASS

WEATHERFAST MARINE VARNISHSuper high gloss finish with maximum levels of U/V inhibitors and stabilisers for areas of extreme exposure. Ideal for panelling, doors, hand rails and general varnish work. Not suitable for floors or traffic surfaces.

COLOUR: Amber.SIZES: 4L, 2L, 1L, 500ml and 250ml.APPLY: Brush - Roller - Spray.

WEATHERFAST POLY CLEAR GLOSSTough abrasion resistant gloss coating with high levels of U.V. inhibitors for interior and exterior use. Ideal for floors, furniture and marine applications. Fast drying, low odour properties an advantage for interior use.

COLOUR: Pale Amber.SIZES: 10L, 4L, 2L, 1L, 500ml and 250ml.APPLY: Brush - Roller - Spray.

WEATHERFAST POLY CLEAR SATINTough low odour satin lustre for furniture, walls, panelling, floors, cork and parquetry.COLOUR: Pale Amber.SIZES: 10L, 4L, 2L, 1L, 500ml and 250ml.APPLY: Brush - Roller - Spray.

PAVING PAINT SLIP RESISTANT (TIMBER CLEAR)Fast drying low sheen finish that provides traction, cushioning and durability. For timber decking, stair treads, ramps and paths. Can be applied over most other clear finishes. Plastic granules produces a uniform texture to reduce overall wear. Easily

recoated and accepts light domestic traffic after 8 hours. Commercial usage after 48 hours.COLOURS: Clear. SIZES: 10L, 4L and 1L. APPLY: Roller Brush, or Spray.

NORTHANE CLEAR GLOSSTwo-pack, non-yellowing polyurethane with outstanding chemical and abrasion resistance. Non toxic cured film. Ideal for waterproofing fish ponds and fountains. May be used in continuously immersed conditions. Excellent heat resistance and durability makes this a premium clear coating. Ideal on surfaces where graffiti is a potential problem.

Graffiti can easily be removed with solvents without damage to the Northane Clear. For use on floors, furniture and exterior applications. A satin finish may be achieved by using Norglass Flattening Agent (interior use only).

COLOUR: Water Clear.SIZES: 10L, 4L, 2L, 1L and 500ml packs.MIXING RATIO: 2:1 by volume.APPLY: Brush - Roller - Spray.

NORCLEAN - PLUSA 100% pure cleaning solvent that leaves the surface “squeaky clean” with no residue.Economical to use.Clean is Green.SIZES: 4L and 1L.

WEATHERFAST SPRAYING THINNERSBlended thinner formulated for use with all Weatherfast products. NoRust Primer, PriCoat, Premium Gloss, Deck Paint, NoRust High Gloss, Satin White, Marine Varnish, Poly Clears and Paving Paints.SIZES: 20L, 4L, 1L and 500ml.

WEATHERFAST BRUSHING THINNERSRetarder-thinner for Weatherfast products to slow the drying rate and to improve brushability. Also used as a clean up solvent for Weatherfast products.SIZES: 4L, 1L and 500ml.

ACETONEFast-evaporating, economical cleaning solvent for many surfaces. Also a clean up solvent for Norglass Polyester Resin.SIZES: 20L, 4L, 1L and 500ml.

EPOXY THINNER Slow-evaporating solvent for thinning and cleaning up after using Norglass epoxy products.SIZES: 20L, 4L, 1L, and 500ml.

NORTHANE SPRAYING THINNERSFormulated blend of solvents specifically designed for use with Norglass Northane, Norshield Primer and Shipshape Primer-Undercoat.Can also be used as a clean-upsolvent for these products.SIZES: 20L, 4L, 1L and 500ml.

NORTHANE BRUSHING THINNERSRetarder-thinner for Northane, to slow the drying rate and improve brushability.SIZES: 4L, 1L and 500ml.

Retarder-thinner for Weatherfast products to slow the drying rate and to improve brushability. Also used as a clean up solvent for Weatherfast products.S

NEWPRODUCT

Fibreglass / Extenders / Sundries

MagnifiedWeaveTexture

7

Australian Made – Australian Owned

SPECIALTY FINISHES NORGLASSNORGLASS

TOPFLIGHT ANTI-FOULINGThe Premium longlife copper coating designed to prevent the attachment of marine growth. Provides maximum results for moored vessels as well as those exceeding 10 knots. Can be repeatedly scrubbed or wet sanded for a racing finish. May be left out

of the water for up to 4 weeks without impairing performance.COLOURS: Red, Black and Blue.SIZE: 4L.APPLY: Brush - Roller.NOTE: Contains copper. Must not be used on aluminium or its alloys as severe corrosion will result.

FIBREGLASS REPAIR KITA comprehensive DIY pack including 250ml Polyester Resin with Chopped Strand Matt (150mmx1m), catalyst, mixing sticks, mixing vessels, brush and talc for on-the-spot repairs. Full instructions included. For a variety of household, marine and general repair work.

MICROTALC EXTENDERFine-textured powder for extending Norglass resins to a trowelable slurry. Economical to use. Produces excellent fairing properties with easy sanding.COLOUR: White powder.SIZES: 5kg, 1kg and 500g.

NORCELL EXTENDERBlended lightweight product for extending Norglass resins to provide the maximum profile for producing the ultimate finish.COLOUR: White.SIZES: 2.5kg, 1kg, 500g and 250g.

FLATTENING AGENT Fine porous powder designed to absorb the gloss of Norglass paint films converting them into a satin finish. Addition rate of 100g for 4 litres of paint, 25g for 1 litre. More or less can be added to achieve the desired gloss level.COLOUR: White powder.SIZES: 250g, 100g and 25g.

CHOPPED STRAND MATT A fibreglass matrix of loosely-fixed 50mm long glass strands bedded into a one metre wide roll for use with either Norglass Norsystem epoxy or Polyester resins. Dry weight is 450g per square metre. Designed for single or multiple layer lamination work where rigidity or stiffening is required.

SIZES: 1 metre wide roll (approx. 70-80 metres in length). Also available in convenient 1 sq.m and.5 sq.m packs.

FIBREGLASS CLOTH AND TAPES

Scrim-weave, glass fabric for reinforcing Norglass Liquid Glass, Norsystem or Polyester resins. Used for general repair work as well as strengthening timber, fibreglass and other surfaces. SIZES: Available in convenient 1 sq.m and .5 sq.m packs. Tapes of 100mm, 75mm and 50mm are in roll lengths of 50 metres.

ANTI-SLIP AGENTPlastic, non-settling granules that can be incorporated in most types of paint finishes (except high-gloss paints) to increase slip resistance. Uniform particle size gives a professional finish to all coatings. Can also be used in clear satin varnishes at reduced levels of addition.

COLOUR: White powder.SIZES: 200g for 4L of paint, 50g for 1L of paint.

This Algester home’s driveway is enhanced with Slip Restistant “Pewter” Paving Paint.

www.norglass.com.au

Norglass Laboratories Pty. Ltd.ABN 92 001 807 245 P.O. Box 312, Neutral Bay, NSW 2089 Australia

Factory: 59 Moxon Road, Punchbowl NSW Telephones: (02) 9708 2200 (07) 3841 0977Facsimile: (02) 9796 3069 Email: norglass@bigpond.net.au

NORGLASSNORGLASS NORGLASSNORGLASS

Australian Made Australian Owned

SPECIALTY FINISHES

PAINT MANUFACTURERS

Rosman Ferries (acquired by the Noakes Group in 2008) have been industry leaders for 100 years.These impeccably well maintained charter vessels are the most recog-nised and colourful craft on Sydney Harbour. Here, three of the fleet of five heritage ferries, display their distinctive red and cream NORGLASS PAINT colours.These vessels cruise the harbour seven days a week on charter work, wedding functions and transport.

Northane Reef Blue and White transform this caravan

Visit us Online