Consider for• H Frames• Stamping• Part

Engagement

Available on H, LH, and A Series Cylinders

ISO 9001REGISTERED

Specials are Our Standard

Non-Rotating Specialty Cylinders

Perfect for applications where the rod end must maintain a specific orientation stroke after stroke

2

Non-Rotating Specialty Cylinders

SPLINE SHAFT

FEATURES:• All cylinder series

• Cushioned or non-cushioned cylinders

• All bore and rod combinations except ⅝" diameter rod

• Spline shaft and mating sleeve prevent natural rotation of piston rod during stroke

• Mounting styles 11, 21, 31, 35, 41, 42, 43, 71, 72, 73. Consult factory for other mounting styles

• Engineering dimensional drawing provided with each cylinder ordered

NOTE: Not available in double rod end cylinders or with stroke lengths over 45 inches. Rotational limits or torsional load information must be supplied to factory. Refer to standard brochures for cylinder features.

PROBLEM

GUIDE ROD

FEATURES:

• All cylinder series

• Cushioned or non-cushioned cylinders

• All mounting styles

• Double rod end cylinders

• All bore and rod combinations 8-inch bore and larger

• Guide rod design through piston prevents natural rotation of piston rod

• Engineering dimensional drawing provided with each cylinder ordered

NOTE: Rotational limits or torsional load information must be supplied to factory. Refer to standard brochures for dimensions and cylinder features.

SPLINE SHAFT SPLINE SLEEVE

GUIDE ROD

In standard cylinders, pistons and cylinder rods are not constrained from rotating around the rod axis. Consequently, the orientation of the rod end may change from one stroke to the next. For many applications, this may not be desirable.

3

Non-Rotating Specialty Cylinders

BORE DIAMETER ROD DIAMETER AVAILABILITY

1½⅝ N/A

1 N/A

2

⅝ N/A

1 N/A

1⅜ N/A

2½

⅝ Yes

1 N/A

1⅜ N/A

1¾ N/A

3¼

1 Yes

1⅜ N/A

1¾ N/A

2 N/A

4

1 Yes

1⅜ Yes

1¾ Yes

2 N/A

2½ N/A

5

1 Yes

1⅜ Yes

1¾ Yes

2 Yes

2½ Yes

3 N/A

3½ N/A

6

1⅜ Yes

1¾ Yes

2 Yes

2½ Yes

3 Yes

3½ Yes

4 N/A

7

3 Yes

3½ Yes

4 Yes

4½ Yes

5 N/A

SOLUTION

Milwaukee Cylinder offers Custom Non-Rotating Solutions for H, LH, and A Series cylinders. Ask your Milwaukee Cylinder representative about our Spline Shaft technology or Internal Guide Rod technology.

www.milwaukeecylinder.com • sales@milwaukeecylinder.comphone 414.769.9700 • fax 414.769.0157

Your Milwaukee Cylinder Distributor

5877 S Pennsylvania AvenueCudahy, Wisconsin 53110-2456 USA

Specials

are

Our

Standard

MILWAUKEE CYLINDER offers:

■ SpEcIALS / cuSTOM pRODucTS

■ HYDRAuLIc cYLInDERS

■ LOw pRESSuRE HYDRAuLIc cYLInDERS

■ pnEuMATIc cYLInDERS

■ ALuMInuM cYLInDERS

■ HYDRAuLIc pnEuMATIc DEVIcES

- pRESSuRE BOOSTERS

- AIR OIL TAnkS

- AccuMuLATORS

■ cYLInDER AccESSORIES

- LInEAR ALIgnMEnT TOOLS

- AMLOk® ROD cLAMp

- SpHERIcAL ROD AccESSORIES

■ InDuSTRIAL MAnIpuLATORS

■ pOwER unITS AnD VALVES

Contact Milwaukee Cylinder for your application needs.

ISO 9001REGISTERED

1010

_05-

0300

0401

8 ©

201

8 M

ilwau

kee

Cylin

der