Carborundum Stair Nosing Infill (for Aluminium Retro-fit Stair Nosing) NIW

CODE ITEM BOX QTY CAT PAGE FINISH €/mNIW252 25MM/1.3M CARBORUNDUM INFILL FOR NOSING NRA452 10 18 11, 16, 20, 120 5,12NIW256 25MM/3.2M CARBORUNDUM INFILL FOR NOSING NRA456 10 18 11, 16, 20, 120 5,12NIW257 25MM/2.6M CARBORUNDUM INFILL FOR NOSING NRA455 10 18 11, 16, 20, 120 5,12

P.V.C. Scoured Stair Nosing Infill NIS

CODE ITEM BOX QTY CAT PAGE FINISH €/mNIS362 37MM/1.3M NOSE INSERT 10 20,23 01,16,20,25,28,30,43,46,47,48,109 4,04NIS365 37MM/2.6M NOSE INSERT 10 20,23 01,16,20,25,28,30,43,46,47,48,109 4,04NIS366 37MM/3.2M NOSE INSERT 10 20,23 01,16,20,25,28,30,43,46,47,48,109 4,04NIS451 45MM/1.2M NOSE INSERT 10 18,20,23 01,16,20,25,28,30,43,46,47,48,109 4,26NIS452 45MM/1.3M NOSE INSERT 10 18,20,23 01,16,20,25,28,30,43,46,47,48,109 4,26NIS454 45MM/2.44M NOSE INSERT 10 18,20,23 01,16,20,25,28,30,43,46,47,48,109 4,26NIS455 45MM/2.6M NOSE INSERT 10 18,20,23 01,16,20,25,28,30,43,46,47,48,109 4,26NIS456 45MM/3.2M NOSE INSERT 10 18,20,23 01,16,20,25,28,30,43,46,47,48,109 4,26

Nos

ings

16Black

20Brown

35Dark Grey

80Mill Aluminium

81Matt Silver

83Matt Brass

84Stainless Steel

85Pewter

01White

11Grey

16Black

20Brown

25Beige

28Green

30Red

43Dolphin Grey

46Midnight Grey

47Yellow

48Cobalt Blue

52Dark Green

109Sky Blue

120Hazzard

Profile Finishes

Infill Finishes

Carborundum Infill - Self adhesive to suit aluminium carrier NRA45.

Scoured Stair Nosing Infill - Hard wearing scoured infill. When installed the section should protrude above the base carrier. This is for extra wear. This profile will accept heavy commercial foot traffic.

87Brass

91Polished Silver

101Chrome

102Brushed Stainless

Steel

4

Nosing Finishes

Colour reproduction is as close as the printing process will allow.

Non-Slip Safety Strip NIW

CODE ITEM BOX QTY CAT PAGE FINISH €/mNIW250 25MM/18.3M SAFETY STRIP 10 17 11, 16, 20, 120 1,32NIW255 25MM / 5M SAFETY STRIP BLISTER PACKED 10 17 11, 16, 20, 30, 47, 48, 52, 120 1,68NIW500 50MM/18.3M SAFETY STRIP 10 17 11, 16, 20, 120 2,62NIW505 50MM / 5M SAFETY STRIP BLISTER PACKED 10 17 11, 16, 20, 30, 47, 48, 52, 120 3,28

Available in two widths (25mm and 50mm) and two roll lengths (5m and 18.3m). PVC base sheet with aluminium oxide silicon carbide grain (GRIT No. 60). Good resistance to water, working temperature range of 5ºC to 50ºC. Manufactured to international standard ISO9001, quality assurance system CNS12682.

11 - Grey 16 - Black

20 - Brown 30 - Red

47 - Yellow 48 - Cobalt Blue

52 - Green 120 - Hazard

Nosings

5

Nosings

NRA25 NRA44

Retro fit aluminium profile supplied with an PVC coloured infill. This base should be laid with both contact adhesive and screw fixing. The profile is ideal for use where there is damage to an existing step or grip is required.

Aluminium Retro-fit Stair Nosing (includes infill) NRA

CODE ITEM BOX QTY CAT PAGE FINISH €/mNRA602 60MM/1.3M ALUMINIUM RETRO NOSING INCLUDES NIS452 10 18 80 12,00NRA605 60MM/2.6M ALUMINIUM RETRO NOSING INCLUDES NIS455 10 18 80 12,00NRA606 60MM/3.2M ALUMINIUM RETRO NOSING INCLUDES NIS456 10 18 80 12,00

Nos

ings

Retro fit aluminium profile supplied mill finish with the appropriate infill. This base should be laid with both contact adhesive and screw fixing. The profile is ideal for use where there is damage to an existing step or grip is required.

Aluminium Retro-fit Stair Nosing (includes infill) NRA

CODE ITEM BOX QTY CAT PAGE FINISH €/mNRA452 45MM ALUMINIUM RETRO - 25MM CARB 1.3M INCLUDES NIW252 10 18 80 9,34NRA455 45MM ALUMINIUM RETRO - 25MM CARB 2.6M INCLUDES NIW257 10 18 80 9,34NRA456 45MM ALUMINIUM RETRO - 25MM CARB 3.2M INCLUDES NIW256 10 18 80 9,34

A low cost robust stair nosing ideal for use where a sure grip is required. These profiles should be laid with both contact adhesive and screw fixing. They are ideal for use where there is damage to an existing step or grip is required.

Aluminium Retro-fit Stair Nosing NRA

CODE ITEM BOX QTY CAT PAGE FINISH €/mNRA255 25MM ALUMINIUM RETRO FIT 1.85M 10 19 81, 83, 85 5,60NRA258 25MM ALUMINIUM RETRO FIT 2.8M 10 19 81, 83, 85 5,24NRA259 25MM ALUMINIUM RETRO FIT 0.92M 10 19 81, 83, 85 6,54NRA442 44MM/1.3M ALUMINIUM RETRO FIT 10 19 80 8,54NRA445 44MM/2.6M ALUMINIUM RETRO FIT 10 19 80 8,54NRA446 44MM/3.2M ALUMINIUM RETRO FIT 10 19 80 8,54

Nosings

6

Nosings

A decorative and functional profile designed to protect step edges.

Aluminium Tile-In NAT

CODE ITEM BOX QTY CAT PAGE FINISH €/mNAT105 10MM TILE-IN NOSING ALUMINIUM BULLNOSE 2.6M 10 22 81 6,96NAT105 10MM TILE-IN NOSING ALUMINIUM BULLNOSE 2.6M 10 22 91 9,32NAT125 12.5MM TILE-IN NOSING ALUMINIUM BULLNOSE 2.6M 10 22 81 7,66NAT125 12.5MM TILE-IN NOSING ALUMINIUM BULLNOSE 2.6M 10 22 91 10,00

Aluminium Tile-In Stair Nosing NLM

CODE ITEM BOX QTY CAT PAGE FINISH €/mNLM105 10MM TILE-IN NOSING ALUMINIUM 1.85M 10 22 81, 83 10,92NLM108 10MM TILE-IN NOSING ALUMINIUM 2.8M 10 22 81, 83 10,92NLM109 10MM TILE-IN NOSING ALUMINIUM 0.92M 10 22 81, 83 10,92NLM125 12MM TILE-IN NOSING ALUMINIUM 1.85M 10 22 81, 83 12,98NLM128 12MM TILE-IN NOSING ALUMINIUM 2.8M 10 22 81, 83 12,98NLM129 12MM TILE-IN NOSING ALUMINIUM 0.92M 10 22 81, 83 12,98

Provides durable protection to tiles or wood coverings with grooved visible area to aid slip resistance.

System designed for a sure grip on external reveals such as steps. PVC Tile-in will protect the tile edges whilst offering a truly finished look.Made of rigid PVC with a soft non-slip PVC wear surface in 2.6m lengths and in 3 finishes.

PVC Tile-in Narrow Tread NPP

CODE ITEM BOX QTY CAT PAGE FINISH €/mNPP126 PVC TILE-IN NARROW TREAD 2.6M 28 24 16, 20, 35 6,92

PVC Tile-in Wide Tread NPP

CODE ITEM BOX QTY CAT PAGE FINISH €/mNPP146 PVC TILE-IN WIDE TREAD 2.6M 20 24 16, 20, 35 11,78

System designed for a sure grip on external reveals such as steps. PVC Tile-in will protect the tile edges whilst offering a truly finished look.Made of rigid PVC with a soft non-slip PVC wear surface in 2.6m lengths and in 3 finishes.

The NIB is an aluminium base section with a co-extruded slip resistant PVC top. The PVC top is available in 2 finishes of black and grey. Suitable for external use.

Aluminium Stair Grip Base with PVC Top NIB

CODE ITEM BOX QTY CAT PAGE FINISH €/mNIB106 10MM ALUMINIUM STAIR GRIP 2.6M 10 24 16, 35 16,50NIB126 12MM ALUMINIUM STAIR GRIP 2.6M 10 24 16, 35 24,30NUC102 UNIVERSAL CAP FOR NIB10/NIB12 2 PER PACK 5 24 16, 35 17,42/box

7

Nosings

Nos

ings

Aluminium Universal Stair Nosing System (includes infill) NSA/NSF/NSG

CODE ITEM BOX QTY CAT PAGE FINISH €/mNSA501 1.2M ALUMINIUM UNI NOSING STRAIGHT SINGLE INCLUDES NIS451 10 23 80 11,32NSA504 2.44M ALUMINIUM UNI NOSING STRAIGHT SINGLE INCLUDES NIS452 10 23 80 11,32NSA506 3.2M ALUMINIUM UNI NOSING STRAIGHT SINGLE INCLUDES NIS452 10 23 80 11,32NSA552 1.3M ALUMINIUM UNI NOSING LARGE STRAIGHT SINGLE INCLUDES NIS452 10 23 80 20,80NSA555 2.6M ALUMINIUM UNI NOSING LARGE STRAIGHT SINGLE INCLUDES NIS453 10 23 80 20,80NSA556 3.2M ALUMINIUM UNI NOSING LARGE STRAIGHT SINGLE INCLUDES NIS454 10 23 80 20,80NSF501 1.2M ALUMINIUM UNI NOSING RAKE SINGLE INCLUDES NIS451 10 23 80 11,32NSF504 2.44M ALUMINIUM UNI NOSING RAKE SINGLE INCLUDES NIS452 10 23 80 11,32NSF506 3.2M ALUMINIUM UNI NOSING RAKE SINGLE INCLUDES NIS452 10 23 80 11,32NSG502 1.3M ALUMINIUM UNI NOSING BULL SINGLE INCLUDES NIS452 10 23 80 11,34NSG505 2.6M ALUMINIUM UNI NOSING BULL SINGLE INCLUDES NIS453 10 23 80 11,34NSG506 3.2M ALUMINIUM UNI NOSING BULL SINGLE INCLUDES NIS454 10 23 80 11,34

An aluminium stair nosing in single and double infill format that can be adapted to suit many types of installations in conjunction with a variety of adjoining materials.

NSA50

NSA55 NSF50

NSG50

Stainless Steel Tile Nosing NSD

CODE ITEM BOX QTY CAT PAGE FINISH €/mNSD084 8MM STAINLESS STEEL TILE-IN NOSING 2.5M 10 25 102 59,64NSD104 10MM STAINLESS STEEL TILE-IN NOSING 2.5M 10 25 102 61,24NSD124 12MM STAINLESS STEEL TILE-IN NOSING 2.5M 10 25 102 64,20

Offers a modern finish to step edges, with protrusions to encourage slip resistance.

Stainless Steel Tile-In Chevron NSC

CODE ITEM BOX QTY CAT PAGE FINISH €/mNSC084 8MM STAINLESS STEEL TILE-IN CHEVRON NOSING 2.5M 5 25 84 66,86NSC104 10MM STAINLESS STEEL TILE-IN CHEVRON NOSING 2.5M 5 25 84 75,24NSC124 12MM STAINLESS STEEL TILE-IN CHEVRON NOSING 2.5M 5 25 84 83,60

This stainless steel chevron nosing is resistant to commonly used chemicals and cleaning agents, ideal for kitchens and bathrooms.

Nosings

8

NMI57 NMG55

NMI88 NMF88

Nosings

An aluminium stair nosing in single and double infill format that can be adapted to suit many types of installations in conjunction with a variety of adjoining materials.

Aluminium Universal Stair Nosing System Twin Infill (includes infill) NSA/NSF

CODE ITEM BOX QTY CAT PAGE FINISH €/mNSA902 1.3M ALUMINIUM UNI NOSING STRAIGHT TWIN INCLUDES NIS362 10 23 80 20,38NSA905 2.6M ALUMINIUM UNI NOSING STRAIGHT TWIN INCLUDES NIS365 10 23 80 20,38NSA906 3.2M ALUMINIUM UNI NOSING STRAIGHT TWIN INCLUDES NIS366 10 23 80 20,38NSF902 1.3M ALUMINIUM UNI NOSING RAKE TWIN INCLUDES NIS362 10 23 80 20,38NSF905 2.6M ALUMINIUM UNI NOSING RAKE TWIN INCLUDES NIS365 10 23 80 20,38NSF906 3.2M ALUMINIUM UNI NOSING RAKE TWIN INCLUDES NIS366 10 23 80 20,38

NSA90 NSF90

Aluminium Heavy Duty Stair Nosing (includes infill) NMI / NMG / NMF

CODE ITEM BOX QTY CAT PAGE FINISH €/mNMI572 57MM/1.3M ALUMINIUM STR H/D STAIR NOSING INCLUDES NIS452 10 20 80 16,04NMI575 57MM/2.6M ALUMINIUM STR H/D STAIR NOSING INCLUDES NIS455 10 20 80 16,04NMI576 57MM/3.2M ALUMINIUM STR H/D STAIR NOSING INCLUDES NIS456 10 20 80 16,04NMG552 57MM/1.3M ALUMINIUM BULL H/D STAIR NOSING INCLUDES NIS452 10 20 80 16,04NMG555 57MM/2.6M ALUMINIUM BULL H/D STAIR NOSING INCLUDES NIS455 10 20 80 16,04NMG556 57MM/3.2M ALUMINIUM BULL H/D STAIR NOSING INCLUDES NIS456 10 20 80 16,04NMF572 57MM/1.3M ALUMINIUM RAKE H/D STAIR NOSING INCLUDES NIS452 10 20 80 16,04NMF575 57MM/2.6M ALUMINIUM RAKE H/D STAIR NOSING INCLUDES NIS455 10 20 80 16,04NMF576 57MM/3.2M ALUMINIUM RAKE H/D STAIR NOSING INCLUDES NIS456 10 20 80 16,04

Aluminium Twin Channel Heavy Duty Stair Nosing (includes infills) NMI / NMF

CODE ITEM BOX QTY CAT PAGE FINISH €/mNMI882 88MM/1.3M ALUMINIUM STRAIGHT H/D TWIN STAIR NOSING INC NIS362 5 20 80 22,86NMI885 88MM/2.6M ALUMINIUM STRAIGHT H/D TWIN STAIR NOSING INC NIS365 5 20 80 22,86NMI886 88MM/3.2M ALUMINIUM STRAIGHT H/D TWIN STAIR NOSING INC NIS366 5 20 80 22,86NMF882 57MM/1.3M ALUMINIUM RAKE H/D TWIN STAIR NOSING INCLUDES NIS362 5 20 80 22,86NMF885 57MM/2.6M ALUMINIUM RAKE H/D TWIN STAIR NOSING INCLUDES NIS365 5 20 80 22,86NMF886 57MM/3.2M ALUMINIUM RAKE H/D TWIN STAIR NOSING INCLUDES NIS366 5 20 80 22,86

A robust single infill heavy duty section in solid aluminium. Such sections would be used in areas of high commercial foot traffic.

A robust single and double infill heavy duty section in solid aluminium. Such sections would be used in areas of high commercial foot traffic.

NMF57

9

Nosings

An aluminium retro fit stair nosing with a self adhesive strip that allows for ease of fixing without the need for mechanical fixings. The varying depths provide an easy solution of choice whether using with vinyl, ceramic or laminate wood flooring.

NAS15 NAS25NAS90

Nos

ings

Aluminium Self Adhesive Retro-fit Stair Nosing NAS

CODE ITEM BOX QTY CAT PAGE FINISH €/mNAS907 9MM RETRO FIT 2.7M SELF ADHESIVE NOSING 10 21 81, 83 6,32NAS909 9MM RETRO FIT 0.9M SELF ADHESIVE NOSING 10 21 81, 83 7,76NAS157 15MM RETRO FIT 2.7M SELF ADHESIVE NOSING 10 21 81, 83 6,74NAS159 15MM RETRO FIT 0.9M SELF ADHESIVE NOSING 10 21 81, 83 8,18NAS257 25MM RETRO FIT 2.7M SELF ADHESIVE NOSING 10 21 81, 83, 85 6,74NAS259 25MM RETRO FIT 0.9M SELF ADHESIVE NOSING 10 21 81, 83, 85 8,18

An aluminium trim that offers protection and contrast with the ceramic tile on a step. The formable punch design in the flange allows a radius to be formed by pressure of hand on site.The profile has a unique reversible option offering two height options.

Aluminium Formable NFA

CODE ITEM BOX QTY CAT PAGE FINISH €/mNFA125 ALUMINIUM FORMABLE 2 IN 1 NOSE 2.6M 10 21 81 9,20NFA125 ALUMINIUM FORMABLE 2 IN 1 NOSE 2.6M 10 21 91 14,18

Nosings

10