Raytec ManufacturingBY:

• Less Maintenance• Design Reduces

Splash Over• Deter Bees, Wasps

and Other Pests• Requires No Holes in

or Under Shingles

• Low Profile - Looks Good

• Fits Directly on Top of Existing Gutters - No Screw or Nail in Shingles

• Helps Prevent Foundation Problems Due to Clogged Gutters

• Works with a Variety of Roof Lines

• Solution to Most Clogging Problems

• Manufactured in U.S.A.

Get : See what installers and homeowners are saying:

Dave in Wisconsin, “I installed the gutter cover in late summer looking toward the fall and flying leaves”, a huge problem in his area of the country. “To my great surprise, not one leaf was lodged in the cover or in the gutter itself. My customers are very pleased.”

Bryan in PA, “Had the gutter cover installed last year and it works great. I like the low profile and low maintenance.”

Rich in Arizona, “I live in an “extreme” area of Arizona. Ponderosa Pines are everywhere and the needles are a big problem when it comes to gutters. So far, the covers have worked flawlessly. No needles, no problems and the covers provide a nice appearance when installed. By far the best metal cover I’ve seen!”

Elvin in New Holland, PA, “looks good and deters pests.”

Installers see many types of gutter protection. When an installer compliments a gutter protection product then you know it must be good.

No exaggerated performance claims just good all-around

gutter protection to meet expectations

Available From:

Reverse bend helps eliminate splash over.

More holes per square inch than the others.

Easily notched and formed in the field for a tight custom fit to deter pests. allows for 4 ft.

coverage with overlap.

48 ½”

Raytec ManufacturingBY:

For use with Hangfast ® or similar hangers For use with Hangtite™ or similar hangers For use with Spikes & Ferrules

Aluminum available in mill finish, white, brown and black, 5 or 6 inch.

Also available in 12 oz. copper.

Your choice of three profiles