NK Cables Antenna Line Products · NK Cables NK Cables has been a recognised supplier of cables since 1912. We work under the Draka Comteq marketing label, combining communication

NK CablesAntenna LineProducts

version 2.1.

Contents

Feeder Cables with connectors, grounding kits and tools

Jumpers

Superflexible Cables with connectors, grounding kits and tools

Accessories

Drums

Codes

6–21

22–27

28–37

38–43

44–47

48–51

2

All information in this catalog is subjectto change without prior notice.

NK Cables’ radio frequency (RF) cableshave been designed to meet the highestquality and environmental standards.An essential part of our philosophy isto maintain continuous improvementand development of new productsand services to provide value to ourcustomers.

In response to market demand, wenow offer a more complete productrange – NK Cables Antenna LineProducts (ALP) – consisting of feedercables, jumpers, superflexible cables,connectors and other accessories.

Mobile Networks Worldwide

We are a proven antenna line provider,with OEM and operator experience.Our production facilities are locatedin Finland, China and Brazil, and ourdistribution centres are in Hamburg,Shanghai, Singapore, Dallas, MexicoCity, and Campinas near São Paulo.An extensive sales network servesour customers worldwide.

NK Cables

NK Cables has been a recognisedsupplier of cables since 1912.We work under the Draka Comteqmarketing label, combiningcommunication cables, fibers andsystems. Our product portfolio consistsof products and services for bothmobile and fixed networks.

Your partner in qualitycable solutions

3

Jumper cable

Feeder cable + connector

EMP Protector

4

This catalog presents NK CablesAntenna Line Products (ALP)consisting of feeder cables, jumpercables, superflexible cables,connectors, tools, grounding kits,EMP-protectors and other accessories.

With this one-stop shopping packagewe guarantee our customers thecompatibility of the different elements,and warrant the proper operation ofour cables and connectors providedthe installation is carried out properly.Furthermore, we offer technicalsupport and training to our ALPcustomers.

Hanger kits and other accessories notincluded in this catalogue are suppliedon request.

In addition to the products presentedin this catalogue, we supply coaxialantennas for tunnels and indoorsolutions.

NK CablesAntenna LineProducts

5

6

Feed

er c

able

s

Feeder cables are typically used formobile telecommunication applications,such as GSM, WCDMA (UMTS), TDMA,D-AMPS, PCN, CDMA and TETRA. Thefunction of the feeder cable is to transmitsignal power between the transmissionequipment and the antenna in allenvironmental conditions.

Low attenuation at high frequencies,uniform characteristic impedance andexcellent return loss as well as highmechanical strength and stability are themost important qualities of NK Cables’Ohmax® feeder cables.

The connectors supplied with our cablesprovide excellent electrical performanceand ensure waterproofness per IP 68.The corresponding tools are presentedon the following pages as well as in theAccessories section of this catalog.

with connectors,grounding kits, tools

7

SpecificationsCONSTRUCTION

Inner conductor Copper-clad aluminium wire Ø 3.1 mm Ø 0.12 inDielectric Cellular polyethylene Ø 8.0 mm Ø 0.32 inOuter conductor Corrugated copper tube Ø 9.5 mm Ø 0.37 inJacketing See table below Ø 11.2 mm Ø 0.44 inMarking hmax®, cable type, manufacture week,

year and meter mark

RF 3/8”-50

ELECTRICAL CHARACTERISTICS at +20°C

Characteristic impedance 50 ± 1Ω

Return Loss (VSWR)• Typical value 24 dB (1.13) for 100 m cable with NKC connector

Attenuation see tableVelocity factor 0.86Capacitance 78 pF/m 24 pF/ftCut-off frequency 14 000 MHzMax power rating see tablePeak RF voltage rating 1.2 kVPeak power rating 14 kWDC-resistance inner conductor 3.6 Ω/km 1.10 Ω/1000 ftDC-resistance outer conductor 3.1 Ω/km 0.94 Ω/1000 ft

MECHANICAL CHARACTERISTICS

Weight 126 kg/km 0.084 lb/ftMaximum pulling force 800 N 180 lbMinimum bending radius• single bending 50 mm 2 in• repeated bending 95 mm 4 inOperating temperature range -40...+70°C -40...+158°F

Feeder cable

10305010020030040045050060070080085090095010001200140016001800190020002200240030003400600013500

1.041.822.363.384.845.986.977.427.848.659.4010.110.410.811.111.412.613.714.815.816.316.817.718.621.122.731.752.4

7.03.93.02.11.51.21.01.00.900.820.760.700.680.660.640.630.570.520.490.460.440.430.410.390.340.320.230.15

0.3180.5550.7211.031.471.822.122.292.392.642.863.083.183.283.383.483.844.184.514.814.965.115.395.666.436.929.6715.9

yes

yes

yes

yes

Black polyethylene

Grey, halogen free fireretardant thermoplastic

Black, halogen free fireretardant thermoplastic

Black, halogen free fireretardant UL Riser RatedJacket

RF 3/8"-50

RF 3/8"-50 GHF

RF 3/8"-50 BHF

RF 3/8"-50 BHF(UL) CATVR E205016

no

yes

yes

yes

no

yes

yes

yes

yes

no

yes

yes

-40°C -40°F

-5°C +23°F

-5°C +23°F

-5°C +23°F

TYPE

JAC

KET

IEC

607

54 -

1/-2

hal

og

en f

ree,

no

n c

orr

osi

ve

IEC

610

34lo

w s

mo

keem

issi

on

IEC

603

32-3

Cfi

re r

etar

dan

t

UV

reta

rdan

cy

Min

. in

stal

lati

on

tem

per

atu

re

JACKETING OPTIONS

NKRF03800

NKRF03801

NKRF03802

NKRF03804

CO

DE

Freq

uen

cy

Att

enu

atio

nd

B/1

00 m

Pow

er r

atin

g k

W

Att

enu

atio

nd

B/1

00 f

t

Attenuation values at ambient temperature +20°C/68°F.Power rating ambient temperature +40°C/104°F, innerconductor +100°C/212°F.

8

GENERAL SPECIFICATION FOR 7-16 CONNECTORS

ELECTRICAL• Characteristic impedance 50Ω• Frequency range up to 8.3 GHz• Center contact resistance ≤ 0.1 m Ω• Insulation resistance ≥ 10 G Ω• Proof voltage at sea level 4.7 kV• Working voltage at sea level 2.7 kV• Screening effectiveness ≥ 128 dB

MECHANICAL• Coupling torque 25…30 Nm• Proof torque 55 Nm• Mechanical lifetime (operations) 10 000• Center contact captivation yes

MATERIALS AND SURFACE FINISH• Resilient contact members high strength copper alloy• Insulation PTFE/FEP/PE/cross-linked

polystyrene• Center and outer conductor parts silver plated• Other metal parts Cu alloy, bright nickel plated• Gaskets Silicone rubber

GENERAL SPECIFICATION FOR N CONNECTORS

ELECTRICAL• Characteristic impedance 50Ω• Frequency range up to 11 GHz• Center contact resistance ≤ 1 m Ω• Insulation resistance ≥ 5 G Ω• Proof voltage at sea level 2.5 kV• Working voltage at sea level 1.4 kV• Screening effectiveness ≥ 100 dB

MECHANICAL• Coupling torque 6 Nm• Proof torque 8 Nm• Mechanical lifetime (operations) 10 000• Center contact captivation yes

MATERIALS AND SURFACE FINISH• Resilient contact members high strength copper alloy,

silver plated (with MIL -types center conductor gold plated)• Insulation PTFE/FEP• Center and outer conductor parts silver plated (with MIL-types

center conductor gold plated)• Other metal parts Cu alloy, silver plated,

bright nickel plated• Gaskets Silicone rubber

RF 3/8”-50Connectors forRF 3/8”-50feeder cable

NKC1038100

N-maleN-female7-16 male7-16 female

NKC1038300NKC1038400NKC1038100NKC1038200

NKC1038200

*secondary shrink sleeve seal required.

NK CODEO-RING SEAL*

Grounding kit for RF 3/8” cable NKG103800

Grounding kitsTools

For Jumpers please see pages 22-27For other accessories, please see pages 38-43

GROUNDING KIT

Product Code

CODES FOR NKC CONNECTORS

9

CONNECTOR TYPE

TOOL FOR CONNECTORS

Cutting Tool for RF 3/8” cable NKA1000

Product

SPARE PART BLADE KIT

Replacement blade for NKA1000-NKA1003 NKA13000

Product

Code

Code


Inner conductor Copper wire Ø 4.8 mm Ø 0.19 inDielectric Cellular polyethylene Ø 12.1 mm Ø 0.48 inOuter conductor Corrugated copper tube Ø 13.6 mm Ø 0.54 inJacketing See table below Ø 16.0 mm Ø 0.63 inMarking hmax®, cable type, manufacture week,

year and meter mark

RF 1/2”-50




Attenuation see tableVelocity factor 0.88Capacitance 76 pF/m 23 pF/ftCut-off frequency 10 000 MHzMax power rating see tablePeak RF voltage rating 1.80 kVPeak power rating 25.9 kWDC-resistance inner conductor 0.95 Ω/km 0.29 Ω/1000 ftDC-resistance outer conductor 1.99 Ω/km 0.61 Ω/1000 ft



Feeder cable

Att

enu

atio

nd

B/1

00 m

Freq

uen

cy

Pow

er r

atin

g k

W

103050100200300400450500600700800850900950100012001400160018001900200022002400260028003000340060008800

0.6691.171.512.163.093.834.454.745.015.536.016.456.676.887.097.298.058.779.4410.110.410.711.311.912.412.913.514.520.225.5

126.95.33.72.62.11.81.71.61.41.31.21.21.21.11.10.990.900.840.790.760.740.700.660.630.610.580.540.390.31

Att

enu

atio

nd

B/1

00 f

t

0.2040.3570.4600.6580.9421.171.361.441.531.691.831.972.032.102.162.222.452.672.883.083.173.263.443.633.783.934.114.416.167.77

yes

yes

yes

yes

Black polyethylene




RF 1/2"-50

RF 1/2"-50 GHF

RF 1/2"-50 BHF


no

yes

yes

yes

no

yes

yes

yes

yes

no

yes

yes

-40°C -40°F

-5°C +23°F

-5°C +23°F

-5°C +23°F

TYPE

JAC

KET

IEC

607

54 -

1/-2

hal

og

en f

ree,

no

n c

orr

osi

ve

IEC

610

34lo

w s

mo

keem

issi

on

IEC

603

32-3

Cfi

re r

etar

dan

t

UV

reta

rdan

cy

Min

. in

stal

lati

on

tem

per

atu

re

JACKETING OPTIONS

NKRF01200

NKRF01201

NKRF01202

NKRF01204

CO

DE

Attenuation values are typical values at ambienttemperature +20°C/68°F. Power rating ambienttemperature +40°C/104°F, inner conductor+100°C/212°F.

10














RF 1/2”-50

Connectors for RF 1/2”-50feeder cable

Grounding kitsTools

NKC1012410

NKC1012610*secondary shrink sleeve seal recommended.


GROUNDING KIT

CONNECTOR TYPE

N-maleN-female7-16 male7-16 femaleN-male Right angle7-16 male Right angle

NK CODESEALING COMPOUND

NK CODEO-RING SEAL*

NKC1012310NKC1012410NKC1012110NKC1012210NKC1012610NKC1012510



Product Code

*secondary shrink sleeve seal recommended.


NK CODEO-RING SEAL*

11

TOOL FOR CONNECTORS

Cutting Tool for RF 1/2” cableDrill mounted cutting tool for RF 1/2" cable

NKA1001NKA12012

Product Code

TOOLS FOR CONNECTORS

Replacement blade for NKA1000-NKA1003Replacement blade for NKA12012

NKA13000NKA13012

Product Code

SPARE PART BLADE KITS

Att

enu

atio

nd

B/1

00 m

Freq

uen

cy

Pow

er r

atin

g k

W

Att

enu

atio

nd

B/1

00 f

t



Inner conductor Copper tube Ø 7.0 mm Ø 0.28 inDielectric Cellular polyethylene Ø 17.6 mm Ø 0.69 inOuter conductor Corrugated copper tube Ø 19.7 mm Ø 0.78 inJacketing See table below Ø 21.9 mm Ø 0.86 inMarking hmax®, cable type, manufacture week,

year and meter mark

RF 5/8”-50




Attenuation see tableVelocity factor 0.88Capacitance 76 pF/m 23 pF/ftCut-off frequency 6800 MHzMax power rating see tablePeak RF voltage rating 2.50 kVPeak power rating 58 kWDC-resistance inner conductor 1.23 Ω/km 0.37 Ω/1000 ftDC-resistance outer conductor 1.09 Ω/km 0.33 Ω/1000 ft



Feeder cable

103050100200300400450500600700800850900950100012001400160018001900200022002400260028003000340060006100

0.4600.8031.041.492.142.643.083.283.473.834.164.484.634.774.925.065.606.106.577.027.247.467.878.278.669.049.4110.114.214.4

19118.35.84.03.32.82.62.52.22.11.91.91.81.81.71.51.41.31.21.21.21.11.00.990.950.910.850.600.60

0.1400.2450.3170.4540.6520.8050.9391.001.061.171.271.371.411.451.501.541.711.862.002.142.212.272.402.522.642.762.873.094.334.38

yes

yes

yes

yes

Black polyethylene




RF 5/8"-50

RF 5/8"-50 GHF

RF 5/8"-50 BHF


no

yes

yes

yes

no

yes

yes

yes

yes

no

yes

yes

-40°C -40°F

-5°C +23°F

-5°C +23°F

-5°C +23°F

TYPE

JAC

KET

IEC

607

54 -

1/-2

hal

og

en f

ree,

no

n c

orr

osi

ve

IEC

610

34lo

w s

mo

keem

issi

on

IEC

603

32-3

Cfi

re r

etar

dan

t

UV

reta

rdan

cy

Min

. in

stal

lati

on

tem

per

atu

re

JACKETING OPTIONS

NKRF05800

NKRF05801

NKRF05802

NKRF05804

CO

DE

12














CONNECTOR TYPE


NKC1058310NKC1058410NKC1058110NKC1058210

NKC1058300NKC1058400NKC1058100NKC1058200

NKC1058410

NKC1058110


Grounding kitsTools


GROUNDING KIT

Product Code




NK CODEO-RING SEAL*

13

TOOL FOR CONNECTORS


NKA1002NKA12058

Product Code



NKA13000NKA13058

Product Code




year and meter mark

RF 7/8”-50







Feeder cable

103050100200300400450500600700800850900950100012001400160018001900200022002400260028003000340040005000

0.3600.6290.8171.171.672.072.422.572.723.003.263.513.633.743.863.974.394.785.155.515.685.856.186.496.807.097.387.958.7510.0

2615128.05.64.53.83.63.43.12.82.62.52.52.42.32.11.91.81.71.61.61.51.41.31.31.21.11.00.90

0.1100.1920.2490.3570.5090.6310.7380.7830.8290.9140.9941.071.111.141.181.211.341.461.571.681.731.781.881.982.072.162.252.422.673.05

yes

yes

yes

yes

Black polyethylene




RF 7/8"-50

RF 7/8"-50 GHF

RF 7/8"-50 BHF


no

yes

yes

yes

no

yes

yes

yes

yes

no

yes

yes

-40°C -40°F

-5°C +23°F

-5°C +23°F

-5°C +23°F

TYPE

JAC

KET

IEC

607

54 -

1/-2

hal

og

en f

ree,

no

n c

orr

osi

ve

IEC

610

34lo

w s

mo

keem

issi

on

IEC

603

32-3

Cfi

re r

etar

dan

t

UV

reta

rdan

cy

Min

. in

stal

lati

on

tem

per

atu

re

JACKETING OPTIONS

NKRF07800

NKRF07801

NKRF07802

NKRF07804

CO

DE

Att

enu

atio

nd

B/1

00 m

Freq

uen

cy

Pow

er r

atin

g k

W

Att

enu

atio

nd

B/1

00 f

t


Att

enu

atio

nd

B/1

00 m

Freq

uen

cy

Pow

er r

atin

g k

W

Att

enu

atio

nd

B/1

00 f

t

14














NKC1078510

CONNECTOR TYPE

N-maleN-female7-16 male7-16 female7-16 male Right angle

NKC1078310NKC1078410NKC1078110NKC1078210NKC1078510


NKC1078300


Grounding kitsTools


GROUNDING KIT

Product Code



NK CODEO-RING SEAL*


15

TOOL FOR CONNECTORS


NKA1003NKA12078

Product Code



NKA13000NKA13078

Product Code




year and meter mark

RF 1 1/4”-50







Feeder cable

1030501002003004004505006007008008509009501000120014001600180019002000220024002600280030003300

0.2500.4390.5710.8191.181.471.721.831.942.152.342.532.612.702.792.873.183.483.764.034.164.294.544.795.025.265.485.81

412318128.56.85.85.45.14.64.23.93.83.73.63.53.12.82.62.42.42.32.22.01.91.91.81.7

0.0760.1340.1740.2500.3600.4480.5240.5580.5910.6550.7130.7710.7960.8230.8500.8750.9691.061.151.231.271.311.381.461.531.601.671.77

yes

yes

yes

Black polyethylene



RF 1 1/4"-50

RF 1 1/4"-50 GHF

RF 1 1/4"-50 BHF

no

yes

yes

no

yes

yes

yes

no

yes

-20°C -4°F

-5°C +23°F

-5°C +23°F

TYPE

JAC

KET

IEC

607

54 -

1/-2

hal

og

en f

ree,

no

n c

orr

osi

ve

IEC

610

34lo

w s

mo

keem

issi

on

IEC

603

32-3

Cfi

re r

etar

dan

t

UV

reta

rdan

cy

Min

. in

stal

lati

on

tem

per

atu

re

JACKETING OPTIONS

NKRF11400

NKRF11401

NKRF11402

CO

DE

Att

enu

atio

nd

B/1

00 m

Freq

uen

cy

Pow

er r

atin

g k

W

Att

enu

atio

nd

B/1

00 f

t


16

NKC1114400













RF 1 1/4”-50Connectors forRF 1 1/4”-50feeder cable

CONNECTOR TYPE


NKC1114310NKC1114410NKC1114110NKC1114210

NKC1114300NKC1114400NKC1114100NKC1114200 NKC1114300



NK CODEO-RING SEAL*


Grounding kit for RF 1 1/4” cable NKG111400

Grounding kitsTools


GROUNDING KIT

Product Code

17

TOOL FOR CONNECTORS

Cutting Tool for RF 1 1/4” cableDrill mounted cutting tool for RF 1 1/4" cable

NKA1004NKA12114

Product Code


Replacement blade for NKA1004 and NKA1005Replacement blade for NKA12114

NKA13001NKA13114

Product Code



Inner conductor Corrugated copper tube Ø 17.5 mm Ø 0.69 inDielectric Cellular polyethylene Ø 42.0 mm Ø 1.65 inOuter conductor Corrugated copper tube Ø 46.5 mm Ø 1.83 inJacketing See table below Ø 50.0 mm Ø 1.97 inMarking hmax®, cable type, manufacture week,

year and meter mark

RF 1 5/8”-50







Feeder cable

1030501002003004004505006007008008509009501000120014001600180019002000220024002600

0.1970.3460.4520.6530.9501.191.401.491.591.761.932.082.162.232.302.382.652.913.163.403.513.633.854.074.28

57322517129.37.97.47.06.25.75.35.14.94.84.64.13.83.53.23.13.02.82.72.5

yes

yes

yes

Black polyethylene



RF 1 5/8"-50

RF 1 5/8"-50 GHF

RF 1 5/8"-50 BHF

no

yes

yes

no

yes

yes

yes

no

yes

-20°C -4°F

-5°C +23°F

-5°C +23°F

TYPE

JAC

KET

IEC

607

54 -

1/-2

hal

og

en f

ree,

no

n c

orr

osi

ve

IEC

610

34lo

w s

mo

keem

issi

on

IEC

603

32-3

Cfi

re r

etar

dan

t

UV

reta

rdan

cy

Min

. in

stal

lati

on

tem

per

atu

re

JACKETING OPTIONS

NKRF15800

NKRF15801

NKRF15802

CO

DE

0.0600.1050.1380.1990.2900.3630.4270.4540.4850.5360.5880.6340.6580.6800.7010.7250.8080.8870.9631.041.071.111.171.241.30

Att

enu

atio

nd

B/1

00 m

Freq

uen

cy

Pow

er r

atin

g k

W

Att

enu

atio

nd

B/1

00 f

t


18














NKC1158400

CONNECTOR TYPE


NKC1158310NKC1158410NKC1158110NKC1158210

NKC1158300NKC1158400NKC1158100NKC1158200

NKC1158110*secondary shrink sleeve seal recommended.


NK CODEO-RING SEAL*


Grounding kitsTools


GROUNDING KIT

Product Code


19

TOOL FOR CONNECTORS


NKA1005NKA12158

Product Code


Replacement blade for NKA1004 and NKA1005Replacement blade for NKA12158

NKA13001NKA13158

Product Code




year and meter mark

RF 2 1/4”-50







Feeder cable

10305010020030040045050060070080085090095010001200140016001800190020002200

0.1670.2950.3860.5600.8191.031.211.301.381.531.681.821.891.952.022.082.332.562.793.013.113.223.42

7241312115129.89.28.67.77.16.56.36.15.95.75.14.64.23.93.83.73.4

yes

yes

yes

Black polyethylene



RF 2 1/4"-50

RF 2 1/4"-50 GHF

RF 2 1/4"-50 BHF

no

yes

yes

no

yes

yes

yes

no

yes

-20°C -4°F

-5°C +23°F

-5°C +23°F

TYPE

JAC

KET

IEC

607

54 -

1/-2

hal

og

en f

ree,

no

n c

orr

osi

ve

IEC

610

34lo

w s

mo

keem

issi

on

IEC

603

32-3

Cfi

re r

etar

dan

t

UV

reta

rdan

cy

Min

. in

stal

lati

on

tem

per

atu

re

JACKETING OPTIONS

NKRF21400

NKRF21401

NKRF21402

CO

DE

0.0510.0900.1180.1710.2500.3140.3690.3960.4210.4660.5120.5550.5760.5940.6160.6340.7100.7800.8500.9170.9480.9811.04

Att

enu

atio

nd

B/1

00 m

Freq

uen

cy

Pow

er r

atin

g k

W

Att

enu

atio

nd

B/1

00 f

t


20














NKC1214110

NKC1214210

CONNECTOR TYPE


NKC1214310NKC1214410NKC1214110NKC1214210

NKC1214300NKC1214400NKC1214100NKC1214200



NK CODEO-RING SEAL*


Grounding kitsTools


GROUNDING KIT

Product Code


21

TOOL FOR CONNECTORS


NKA1006NKA12214

Product Code


22

JumpersJumpers are typically used to connectthe feeder cable to the transmissionequipment or to the antenna in mobiletelecommunication applications.

The design of the assembly ensures thewaterproofness of the jumper per IP 68.The soldered inner and outer conductorguarantee excellent return loss and lowintermodulation.

23



23



23

Jumpers

HIGHLIGHTS OF NK JUMPERS

• Excellent return loss values and lowand stable intermodulation

• Waterproof per IP68 water immersiontesting specifications

• Test report with return loss and intermodulation measurements attached to each jumper

Stable electrical performance is ensuredby high quality Ohmax® superflexiblecable and special connector head design.

The design is based on three mainprinciples ensuring compliance with IP68water immersion testing:• 7-16 head sealing with O-rings• induction soldering of the inner and

outer conductors providing 360 degreesof contact and sealing

• enclosing the connection at the rear of the connector with injection molded plastic providing the external waterproof seal.

Additional protection is maintainedduring storage and transport bywatertight protective cap on each end.

24

with Ohmax® super-flexible RFF 1/2” cable

Soldered joints

Molded body

Silicon O-ring

Solder joint

Jumpers

25

0.0

-10.0

-20.0

-30.0

-40.0

-50.030 500 1000 1500 2000 2700Return loss (dB)/Frequency (MHz)

For traceability, a weatherproof ID label is attachedto each jumper. All jumpers are provided withprotective caps.

NK jumper test report with return lossand intermodulation measurements.

26

RFF 1/2”cable length

Connectors500 mm 1000 mm 1500 mm 2000 mm 2500 mm 3000 mm

NKJ 11 NKJ 111 NKJ 112 NKJ 113 NKJ 114 NKJ 115 NKJ 116


Male 7/16 Male N

Male 7/16 Female 7/16



Male 7/16 Female N


Male 7/16 Male 7/16 90°



Female 7/16 Female 7/16


Female 7/16 Male N


Female 7/16 Female N


Female 7/16 Male 7/16 90°

Male 7/16 Male N 90°


Female 7/16 Male N 90°


Male N Male N


Male N Female N


Male N Male 7/16 90°


Male N Male N 90°


Female N Female N


Female N Male 7/16 90°


Female N Male N 90°

Male 7/16 Male 7/16

LENGTH UNIT: METRIC

Jumpers

Fire retardant jumpers for indoor applications also available,for instance NKJ112BHF and NKJ112GHF. Also other lengths are available.

Jumpers

27

RFF 1/2” cable length

Connectors3 ft 6 ft 8 ft 9 ft 10 ft 12 ft



















LENGTH UNIT: FEET

Male 7/16 Male N

Male 7/16 Female 7/16

Male 7/16 Female N

Male 7/16 Male 7/16 90°

Female 7/16 Female 7/16

Female 7/16 Male N

Female 7/16 Female N

Female 7/16 Male 7/16 90°

Male 7/16 Male N 90°

Female 7/16 Male N 90°

Male N Male N

Male N Female N

Male N Male 7/16 90°

Male N Male N 90°

Female N Female N

Female N Male 7/16 90°

Female N Male N 90°

Male 7/16 Male 7/16

Fire retardant jumpers for indoor applications also available,for instance NKJ112BHF and NKJ112GHF. Also other lengths are available.

28

Sup

erfl

exib

le c

able

s

The extraflexible RFE range can be usedfor indoor and rooftop applicationsthanks to the excellent bendingperformance. In some cases the RFErange can replace the use of jumpers.

The superflexible RFF cables are typicallyused as jumpers to connect the feedercable to the transmission equipment orto the antenna in mobiletelecommunication applications.

The connectors and corresponding toolsare presented on the following pages.

with connectors,grounding kits, tools

29



year and meter mark

RFE 7/8”-50




Attenuation see tableVelocity factor 0.88Capacitance 74.3 pF/m 22.7 pF/ftCut-off frequency 5400 MHzMax power rating see tablePeak RF voltage rating 2.8 kVPeak power rating 84 kWDC-resistance inner conductor 2.50 Ω/km 0.76 Ω/1000 ftDC-resistance outer conductor 1.05 Ω/km 0.32 Ω/1000 ft


Weight 434 kg/km 0.29 lb/ftMaximum pulling force 1500 N 337 lbMinimum bending radius• single bending 80 mm 3.2 in• repeated bending 110 mm 4.3 inOperating temperature range -40...+70°C -40...+158°F

Extraflexible cable

103050100200300400450500600700800850900950100012001400160018001900200022002400300034004900

0.3910.6840.8891.271.832.282.662.833.003.323.613.894.024.154.284.414.895.345.766.176.376.566.947.308.348.9911.3

2313107.05.04.03.43.23.12.82.52.42.32.22.22.11.91.71.61.51.51.41.31.31.11.00.83

0.1190.2080.2710.390.560.690.810.860.921.011.101.191.231.271.311.341.491.631.761.881.942.002.112.232.542.743.43

yes

yes

yes

Black polyethylene



RFE 7/8"-50

RFE 7/8"-50 GHF

RFE 7/8"-50 BHF

no

yes

yes

no

yes

yes

yes

no

yes

-40°C -40°F

-5°C +23°F

-5°C +23°F

TYPE

JAC

KET

IEC

607

54 -

1/-2

hal

og

en f

ree,

no

n c

orr

osi

ve

IEC

610

34lo

w s

mo

keem

issi

on

IEC

603

32-3

Cfi

re r

etar

dan

t

UV

reta

rdan

cy

Min

. in

stal

lati

on

tem

per

atu

re

JACKETING OPTIONS

NKRFE07800

NKRFE07801

NKRFE07802

CO

DE

Freq

uen

cy

Att

enu

atio

nd

B/1

00 m

Pow

er r

atin

g k

W

Att

enu

atio

nd

B/1

00 f

t


30













RFE 7/8”-50Connectors forRFE 7/8”-50extraflexible cable

CONNECTOR TYPE

N-maleN-female7-16 male7-16 female7-16 male Right angle




NK CODEO-RING SEAL*


Grounding kitsTools

Grounding kit for RFE 7/8” cable NKG107800

GROUNDING KIT

Product Code



31

NKC1078510

NKC1078300

TOOL FOR CONNECTORS

Cutting Tool for RFE 7/8” cable NKA1003

Product



Product

Code


Inner conductor Copper wire Ø 1.9 mm Ø 0.07 inDielectric Cellular polyethylene Ø 4.8 mm Ø 0.19 inOuter conductor Corrugated copper tube Ø 6.4 mm Ø 0.25 inJacketing See table below Ø 7.4 mm Ø 0.29 inMarking hmax®, cable type, manufacture week,

year and meter mark

RFF 1/4”-50




Attenuation see tableVelocity factor 0.83Capacitance 80 pF/m 25 pF/ftCut-off frequency 21000 MHzMax power rating see tablePeak RF voltage rating 0.74 kVPeak power rating 5.4 kWDC-resistance inner conductor 9.8 Ω/km 3.0 Ω/1000 ftDC-resistance outer conductor 7.7 Ω/km 2.3 Ω/1000 ft


Weight 74 kg/km 0.050 lb/ftMaximum pulling force 350 N 80 lbMinimum bending radius• single bending 12.5 mm 0.5 in• repeated bending 25 mm 1 inOperating temperature range -40...+70°C -40...+158°F

Superflexible cable

10305010020030040045050060070080085090095010001200140016001800190020002200240030003400600020400

1.813.154.095.828.3210.311.912.713.414.816.017.217.818.318.919.421.423.325.026.727.528.329.831.335.438.052.5110

3.42.01.51.10.750.610.530.490.470.430.390.370.350.340.330.320.290.270.250.240.230.220.210.200.180.170.120.06

0.5520.9601.251.772.543.143.633.874.084.514.885.245.435.585.765.916.527.107.628.148.388.639.089.5410.811.616.033.4

yes

yes

yes

Black polyethylene



RFF 1/4"-50

RFF 1/4"-50 BHF

RFF 1/4"-50 BHF(UL) CATVR E205016

no

yes

yes

no

yes

yes

yes

yes

yes

-40°C -40°F

-5°C +23°F

-5°C +23°F

TYPE

JAC

KET

IEC

607

54 -

1/-2

hal

og

en f

ree,

no

n c

orr

osi

ve

IEC

610

34lo

w s

mo

keem

issi

on

IEC

603

32-3

Cfi

re r

etar

dan

t

UV

reta

rdan

cy

Min

. in

stal

lati

on

tem

per

atu

re

JACKETING OPTIONS

NKRFF01400

NKRFF01402

NKRFF01404

CO

DE

Freq

uen

cy

Att

enu

atio

nd

B/1

00 m

Pow

er r

atin

g k

W

Att

enu

atio

nd

B/1

00 f

t


32









MATERIALS AND SURFACE FINISH• Resilient contac tmembers high strength copper alloy,




RFF 1/4”-50Connectors forRFF 1/4”-50superflexible cable

NKC2014620

CONNECTOR TYPE

N-maleN-female7-16 male7-16 femaleN-male Right angle

NK CODEHEAT SHRINK SLEEVE




Tools

33

TOOL FOR CONNECTORS

Cutting Tool for RFF 1/4” cable NKA1007

Product



Product

Code



year and meter mark

RFF 3/8”-50






Weight 130 kg/km 0.087 lb/ftMaximum pulling force 400 N 90 lbMinimum bending radius• single bending 13 mm 0.5 in• repeated bending 25 mm 1 inOperating temperature range -40...+70°C -40...+158°F

Superflexible cable

10305010020030040045050060070080085090095010001200140016001800190020002200240030003400600013400

1.322.313.004.296.167.648.919.4910.011.112.113.013.413.914.314.716.317.819.120.521.121.823.024.227.629.741.970.0

6.23.62.71.91.31.10.930.870.830.750.690.640.620.600.580.570.510.470.440.410.400.390.370.350.310.290.200.12

0.4020.7040.9141.311.882.332.722.893.053.383.693.964.084.244.364.484.975.435.826.256.436.647.017.388.419.0512.821.3

yes

yes

yes

Black polyethylene



RFF 3/8"-50

RFF 3/8"-50 BHF


no

yes

yes

no

yes

yes

yes

yes

yes

-40°C -40°F

-5°C +23°F

-5°C +23°F

TYPE

JAC

KET

IEC

607

54 -

1/-2

hal

og

en f

ree,

no

n c

orr

osi

ve

IEC

610

34lo

w s

mo

keem

issi

on

IEC

603

32-3

Cfi

re r

etar

dan

t

UV

reta

rdan

cy

Min

. in

stal

lati

on

tem

per

atu

re

JACKETING OPTIONS

NKRFF03800

NKRFF03802

NKRFF03804

CO

DE

Freq

uen

cy

Att

enu

atio

nd

B/1

00 m

Pow

er r

atin

g k

W

Att

enu

atio

nd

B/1

00 f

t


34














CONNECTOR TYPE

N-maleN-female7-16 male7-16 femaleN-male Right angle


CODES FOR NKC CONNECTORSNKC2038220


Tools


NKC2038620

35

TOOL FOR CONNECTORS

Cutting Tool for RFF 3/8” cable NKA1008

Product



Product

Code



year and meter mark

RFF 1/2”-50




Attenuation see tableVelocity factor 0.82Capacitance 82 pF/m 25 pF/ftCut-off frequency 12 500 MHzMax power rating see tablePeak RF voltage rating 1.39 kVPeak power rating 19.0 kWDC-resistance inner conductor 2.73 Ω/km 0.83 Ω/1000 ftDC-resistance outer conductor 4.11 Ω/km 1.25 Ω/1000 ft


Weight 190 kg/km 0.13 lb/ftMaximum pulling force 500 N 110 lbMinimum bending radius• single bending 15 mm 0.6 in• repeated bending 30 mm 1.2 inOperating temperature range -40...+70°C -40...+158°F

Superflexible cable

10305010020030040045050060070080085090095010001200140016001800190020002200240030003400600010200

0.991.742.263.244.665.796.767.217.648.449.199.9010.210.610.911.212.413.614.715.716.216.717.718.621.322.932.645.9

7.84.53.52.41.71.41.21.11.00.940.860.800.780.750.730.710.640.590.550.510.500.480.460.430.380.360.250.18

0.3020.5300.6890.9881.421.762.062.202.332.572.803.023.113.233.323.413.784.154.484.794.945.095.395.676.496.999.9414.0

yes

yes

yes

yes

Black polyethylene




RFF 1/2"-50

RFF 1/2"-50 GHF

RFF 1/2"-50 BHF


no

yes

yes

yes

no

yes

yes

yes

yes

no

yes

yes

-40°C -40°F

-5°C +23°F

-5°C +23°F

-5°C +23°F

TYPE

JAC

KET

IEC

607

54 -

1/-2

hal

og

en f

ree,

no

n c

orr

osi

ve

IEC

610

34lo

w s

mo

keem

issi

on

IEC

603

32-3

Cfi

re r

etar

dan

t

UV

reta

rdan

cy

Min

. in

stal

lati

on

tem

per

atu

re

JACKETING OPTIONS

NKRFF01200

NKRFF01201

NKRFF01202

NKRFF01204

CO

DE

Freq

uen

cy

Att

enu

atio

nd

B/1

00 m

Pow

er r

atin

g k

W

Att

enu

atio

nd

B/1

00 f

t


36














CONNECTOR TYPE

N-maleN-female7-16 male7-16 femaleN-male Right angle7-16 male Right angle


NKC2012520


Tools



37

NKC2012420

TOOL FOR CONNECTORS

Cutting Tool for RFF 1/2” cableDrill mounted cutting tool for RFF 1/2" cable

NKA1009NKA22012

Product Code



NKA13002NKA23012

Product Code


38

AccessoriesEasy to install, reliable and maintenancefree in any environmental conditions.On the following pages you will find asummary of grounding kits as well asinformation on EMP-protectors, toolsand the sealing compound for theconnectors.

For other accessories not included in thiscatalog please contact our salespersonnel.

39

40

Accessories

CONNECTORS

For feeder cables NK Cables offers lowintermodulation, “one-piece” connectors that feature two different solutions for providing primary weatherproofness: sealing compound and O-ring technology.• Sealing compound: Plast 2000 is

injected into the connector/cable junction during the connector installation to form a complete seal.

• O-ring: These connectors employ precision O-rings to provide the primary weatherproof sealing forthe cable/connector interface.(A secondary shrink sleeve is recommended.)

For superflexible RFF cables the sealingis done with a shrink sleeve. Theseconnectors utilize a heat activated shrinksleeve that has been coated with anadhesive on the inside, to provide theprimary weatherproof sealing for the connector. Technical details and part numbers are presented in the sectionsFeeder Cables and Superflexible Cables.

Following the instructions the cable/connector interface will meet IP 68.

Accessories

41

Filling quantity per connector:One tube of 20 cm3 fills the followingnumber of connectors

RF 1/2” –50 5 (4 cm3)RF 5/8” –50 3 (6 cm3)RF 7/8” –50 2 (7 cm3)RF 1 1/4” –50 1 (15 cm3)RF 1 5/8” –50 1 (20 cm3)RF 2 1/4” –50 - (28 cm3)

SEALING COMPOUND PLAST 2000

CHARACTERISTICS

• Guarantees optimum corrosion protection of the outer conductor contact point between cable and connector.

• Ensures perfect sealing between connector and cable.

• Features a special bonding system which protects the copper from corrosion attack of any kind.

• Relieves mechanical stress in the contact point of outer cable conductorand connector, which is most important for RF-technology. Any forces affecting the cable are distributed along the whole length of the inlet sleeve up to the contact point.

Plast 2000 is supplied in tubes of 20 cm3

or 70 cm3. The 20 cm3 tube can bescrewed into a threaded hole into thecable inlet. The required quantity ofPlast 2000 is indicated in the relevantconnector assembly instructions.

One tube of 70 cm3 fills the followingnumbers of connectors

RF 1/2” –50 17 (4 cm3)RF 5/8” –50 11 (6 cm3)RF 7/8” –50 10 (7 cm3)RF 1 1/4” –50 4 (15 cm3)RF 1 5/8” –50 3 (20 cm3)RF 2 1/4” –50 2 (28 cm3)

Product

Plast 2000 tube with 20 cm3 contentPlast 2000 tube with 70 cm3 contentInjection gun with thread M9

NK Code

NKA2000NKA2001NKA2002

42

Accessories

GROUNDING KITS

CHARACTERISTICS

• Easy and rapid installation• Waterproof per IP 68 (1 m of water for 24 hours)• Large contact surface• Reusable

EMP PROTECTORS

Broadband EMP-protector with /4 stub technologyFixed adaptor 7-16 male/female with /4 stub NKA3000

CHARACTERISTICS

• One-piece, easy and rapid installation• Silver plated• Waterproof per IP 67• No maintenance required

TECHNICAL DATA

Frequency range 800 ≤ f ≤ 2170 MHzVSWR ≤ 1.11Insertion Loss ≤ 0.1 dBSurge current 25 kA

Grounding kit for RF 3/8” cableGrounding kit for RF 1/2” cableGrounding kit for RF 5/8” cableGrounding kit for RF 7/8” and RFE 7/8 cableGrounding kit for RF 1 1/4” cableGrounding kit for RF 1 5/8” cableGrounding kit for RF 2 1/4” cable

GROUNDING KITS

Product NK Code

NKG103800NKG101200NKG105800NKG107800NKG111400NKG115800NKG121400

EMP-protector, 800-2170 MHz, 7-16 m/f NKA3000EMP-protector, 1710-1990 MHz, 7-16 m/f NKA3001

Product NK Code

Accessories

43

TOOLS


Factory designed cablepreparation tools provide anumber of assemblyadvantages. The requiredassembly time is reducedleading to a considerablereduction of the assembly costs.

The cutting tools guaranteeconstant assembly quality asthe fixed dimensions for cablepreparation eliminatedimensional deviations.

Cutting Tool for RF 3/8” cableCutting Tool for RF 1/2” cableCutting Tool for RF 5/8” cableCutting Tool for RF 7/8” andRFE 7/8 cableCutting Tool for RF 1 1/4” cableCutting Tool for RF 1 5/8” cableCutting Tool for RF 2 1/4” cableCutting Tool for RFF 1/4” cableCutting Tool for RFF 3/8” cableCutting Tool for RFF 1/2” cable


Product NK Code


Product NK Code

NKA1000NKA1001NKA1002

NKA1003NKA1004NKA1005NKA1006NKA1007NKA1008NKA1009

Replacement blade forNKA1000-NKA1003Replacement blade forNKA1004 and NKA1005Replacement blade forNKA1007-NKA1009

NKA13000

NKA13001

NKA13002

Drill mounted cutting tool for RF 1/2" cable *)Drill mounted cutting tool for RF 5/8" cable *)Drill mounted cutting tool for RF 7/8" cable *)Drill mounted cutting tool for RF 1 1/4" cableDrill mounted cutting tool for RF 1 5/8" cableDrill mounted cutting tool for RF 2 1/4" cableDrill mounted cutting tool for RFF 1/2" cable


Product NK CodeNKA12012NKA12058NKA12078NKA12114NKA12158NKA12214NKA22012

*)Can also be used manually with T-handles.

Replacement blade for NKA12012Replacement blade for NKA12058Replacement blade for NKA12078Replacement blade for NKA12114Replacement blade for NKA12158Replacement blade for NKA22012T-Handles


Product NK CodeNKA13012NKA13058NKA13078NKA13114NKA13158NKA23012NKA14000

44

Drums

45

The drums used for our cablesare made of wood.

On the following pages we presentthe drum types for different cablesas well as simplified instructionsfor the transportation.

46

DrumsWOODEN CABLE DRUMS

The drums are made of planed barklessboards. The standard drum sizes used fordifferent cable types are specified below.Special non-standard drums can besupplied on request. Also impregnationis available on request.

HANDLING AND TRANSPORT

Handling instructions are attached oneach drum. The reeling direction of thecable is indicated by an arrow. Fortransportation and storage the cable isprotected by using wooden (19 mm)lagging nailed on the outer rim of theflanges. Plastic cover is placed on the drumunder the cable and also over the outerlayer of the cable beneath the lagging.Cable ends are sealed with a shrinkableplastic tube.

For detailed instructions for the handling of drumsplease see our multi-lingual booklet “The right wayto transport and move drums” (in English, Spanish,Portuguese, French, Russian, Chinese, Arabic, andFinnish).

RF 7/8"RF 1 1/4"RF 1 1/4"RF 1 5/8"RF 1 5/8"

P22QP19QP22UP19QP22U

1000 - 2000 400 - 600 600 - 1200 200 - 400 600 - 1200

220194220194220

96130110130110

118106130106130

969912099120

8282828282

NKDP22QNKDP19QNKDP22UNKDP19QNKDP22U

3281 - 65621312 - 19681968 - 3937 656 - 13121968 - 3937

3851435143

4642514251

3839473947

SPECIAL DRUMS FOR RF-CABLES

8776877687

eD d

w

W

Cabletype

RFF 1/4"RFF 3/8"RF 3/8"RF 1/2"RFF 1/2"RF 5/8"RF 7/8"RF 7/8"RFE 7/8"RF 1 1/4"RF 1 5/8"RF 2 1/4"

STANDARD DRUMS FOR RF-CABLES

Standarddrumname

P5CP5CP6DP11DP11DP14GP14GP16GP14GP21GP21GP21Q

Standardlength

m

250 - 250250 - 250250 - 250400 - 600400 - 600400 - 600400 - 600900 - 1100400 - 600400 - 700200 - 400250 - 350

Outerdiam.(D)cm

545460114114144144164144214214214

Drumdiam(d)cm

252533707080808080130130150

Outerwidth(W)cm

5050515555747474747474112

Innerwidth(w)cm

4040434848616167616464105

Shafthole(e)mm

828282828282828282828282

Code

NKD5CNKD5CNKD6DNKDP11DNKDP11DNKDP14GNKDP14GNKDP16GNKDP14GNKDP21GNKDP21GNKDP21Q

Standardlength

ft

820 - 820 820 - 820 820 - 8201312 - 19681312 - 19681312 - 19681312 - 19682953 - 36091312 - 19681312 - 2297 656 - 1312 820 - 1148

Outerdiam.(D)in

212124454557576557848484

Drumdiam(d)in

101013282832323232515159

Outerwidth(W)in

202020222229292929292944

Innerwidth(w)in

161617191924242624252541

47

HANDLING INSTRUCTIONS FOR TRANSPORTION

Only lift with barthrough center.

Keep uppright,do not lay flat.

Drums

When handling with forklift;keep uppright.

Roll according toarrow.

220235250235250

0.5300.9400.9401.4501.450

750 - 1280 611 - 799 814 - 1378 525 - 8151120 - 1990

5.713.996.293.996.29

46262

9125125

0.3560.6320.6320.9750.975

1653 - 28221347 - 17611795 - 30381157 - 17972469 - 4387

485518551518551

3.23.23.23.23.2

201.69140.88222.20140.88222.20

Drumweight

kg

1212146565128128118128202202338

Cableweight

kg/m

0.0740.1300.1260.3500.1900.4100.5300.5300.4340.9401.4502.000

Totalweight

kg

31 - 31 45 - 45 46 - 46205 - 275141 - 179292 - 374340 - 446595 - 701302 - 388578 - 860492 - 782838 - 1038

Drumfreightvolumem3

0.150.150.180.710.711.531.531.991.533.393.395.13

Drumsto fit in

20´ container

14614680424212121012775

Drumsto fit in

40´ container

328328160848424242124161611

Totalweight

lb

67 - 67 98 - 98 100 - 100 453 - 607 312 - 395 644 - 825 750 - 9831311 - 1545 665 - 8561274 - 18961085 - 17241847 - 2288

Cableweight

lb/ft

0.0500.0870.0850.2350.1280.2760.3560.3560.2920.6320.9751.344

Drumweight

lb

262631144144282282259282445445745

Shafthole(e)in

3.23.23.23.23.23.23.23.23.23.23.23.2

Drumfreightvolumecu.ft

5.15 5.15 6.48 25.24 25.24 54.19 54.19 70.29 54.19119.68119.68181.13

Codes

NKA13114 Replacement blade for NKA12114



NKA14000 T-Handles

NKC1012100 Connector 7-16 male forRF 1/2", O-ring

NKC1012200 Connector 7-16 female forRF 1/2”, O-ring

NKC1012300 Connector N male forRF 1/2”, O-ring

NKC1012400 Connector N female forRF 1/2”, O-ring

NKC1012500 Connector 7-16 Right angle male for RF 1/2”, O-ring

NKC1012600 Connector N Right angle male for RF 1/2”, O-ring

NKC1038100 Connector 7-16 male forRF 3/8”, O-ring




NKC1058100 Connector 7-16 male forRF 5/8”, O-ring




NKC1078100 Connector 7-16 male forRF 7/8”/RFE 7/8", O-ring

NKC1078200 Connector 7-16 female forRF 7/8"/RFE 7/8", O-ring

NKC1078300 Connector N male forRF 7/8"/RFE 7/8", O-ring

NKC1078400 Connector N female forRF 7/8"/RFE 7/8", O-ring

NKC1078500 Connector 7-16 Right angle male for RF 7/8"/RFE 7/8",O-ring

NK code ProductNK code Product

NKA1000 Cutting Tool for RF 3/8” cableNKA1001 Cutting Tool for RF 1/2” cableNKA1002 Cutting Tool for RF 5/8” cableNKA1003 Cutting Tool for RF 7/8”

and RFE 7/8" cableNKA1004 Cutting Tool for RF 1 1/4” cableNKA1005 Cutting Tool for RF 1 5/8” cableNKA1006 Cutting Tool for RF 2 1/4” cableNKA1007 Cutting Tool for RFF 1/4” cableNKA1008 Cutting Tool for RFF 3/8” cableNKA1009 Cutting Tool for RFF 1/2” cableNKA2000 Plast 2000 tube with 20 cm3

contentNKA2001 Plast 2000 tube with 70 cm3

contentNKA2002 Injection gun with thread M9NKA3000 EMP-protector, 800-2170 MHz,

7-16 m/fNKA3001 EMP-protector, 1710-1990 MHz,

7-16 m/f

NKA12012 Drill mounted cutting tool for RF 1/2" cable



NKA12114 Drill mounted cutting tool for RF 1 1/4" cable



NKA22012 Drill mounted cutting tool for RFF 1/2" cable

NKA13000 Replacement blade forNKA1000-NKA1003

NKA13001 Replacement blade forNKA1004 and NKA1005

NKA13002 Replacement blade forNKA1007-NKA1009




48

Codes

NKC1114100 Connector 7-16 male forRF 1 1/4", O-ring

NKC1114200 Connector 7-16 female forRF 1 1/4”, O-ring

NKC1114300 Connector N male forRF 1 1/4”, O-ring

NKC1114400 Connector N female forRF 1 1/4”, O-ring


NKC1158200 Connector 7-16 female forRF 1 5/8", O-ring

NKC1158300 Connector N male forRF 1 5/8", O-ring

NKC1158400 Connector N female forRF 1 5/8", O-ring


NKC1214200 Connector 7-16 female forRF 2 1/4", O-ring

NKC1214300 Connector N male forRF 2 1/4", O-ring

NKC1214400 Connector N female forRF 2 1/4", O-ring

NKC1012110 Connector 7-16 male forRF 1/2", Plast 2000 seal

NKC1012210 Connector 7-16 female forRF 1/2”, Plast 2000 seal

NKC1012310 Connector N male forRF 1/2”, Plast 2000 seal

NKC1012410 Connector N female forRF 1/2”, Plast 2000 seal

NKC1012510 Connector 7-16 Right angle male for RF 1/2”, Plast 2000 seal

NKC1012610 Connector N Right angle male for RF 1/2”, Plast 2000 seal

NKC1058110 Connector 7-16 male forRF 5/8”, Plast 2000 seal

NKC1058210 Connector 7-16 female forRF 5/8”, Plast 2000 seal

NKC1058310 Connector N male forRF 5/8”, Plast 2000 seal

NKC1058410 Connector N female forRF 5/8”, Plast 2000 seal

NKC1078110 Connector 7-16 male forRF 7/8”/RFE 7/8", Plast 2000 seal

NKC1078210 Connector 7-16 female forRF 7/8"/RFE 7/8", Plast 2000 seal

NKC1078310 Connector N male forRF 7/8"/RFE 7/8", Plast 2000 seal

NKC1078410 Connector N female forRF 7/8"/RFE 7/8", Plast 2000 seal

NKC1078510 Connector 7-16 Right angle male for RF 7/8"/RFE 7/8",Plast 2000 seal

NKC1114110 Connector 7-16 male forRF 1 1/4", Plast 2000 seal

NKC1114210 Connector 7-16 female forRF 1 1/4”, Plast 2000 seal

NKC1114310 Connector N male forRF 1 1/4”, Plast 2000 seal

NKC1114410 Connector N female forRF 1 1/4”, Plast 2000 seal


NKC1158210 Connector 7-16 female forRF 1 5/8", Plast 2000 seal

NKC1158310 Connector N male forRF 1 5/8", Plast 2000 seal

NKC1158410 Connector N female forRF 1 5/8", Plast 2000 seal


NKC1214210 Connector 7-16 female forRF 2 1/4", Plast 2000 seal

NKC1214310 Connector N male forRF 2 1/4", Plast 2000 seal

NKC1214410 Connector N female forRF 2 1/4", Plast 2000 seal


49

Codes

NKD5C Drum P5CNKD6D Drum P6DNKDP11D Drum P11DNKDP14G Drum P14GNKDP16G Drum P16GNKDP19Q Drum P19QNKDP21G Drum P21GNKDP21Q Drum P21QNKDP22U Drum P22UNKDP22Q Drum P22Q

NKG101200 Grounding kit for RF 1/2” cableNKG103800 Grounding kit for RF 3/8” cableNKG105800 Grounding kit for RF 5/8” cableNKG107800 Grounding kit for RF 7/8” and

RFE 7/8" cableNKG111400 Grounding kit for RF 1 1/4” cableNKG115800 Grounding kit for RF 1 5/8” cableNKG121400 Grounding kit for RF 2 1/4” cable

NKC2012120 Connector 7-16 male forRFF 1/2”, heat shrink sleeve

NKC2012220 Connector 7-16 female forRFF 1/2”, heat shrink sleeve

NKC2012320 Connector N male for RFF 1/2”,heat shrink sleeve

NKC2012420 Connector N female forRFF 1/2”, heat shrink sleeve

NKC2012520 Connector 7-16 Right angle male for RFF 1/2”,heat shrink sleeve

NKC2012620 Connector N Right angle malefor RFF 1/2”, heat shrink sleeve












50

Codes


NKRFE07800 Extraflexible cable RFE 7/8”-50NKRFE07801 Extraflexible cable RFE 7/8”-50 GHFNKRFE07802 Extraflexible cable RFE 7/8”-50 BHFNKRFF01200 Superflexible cable RFF 1/2” -50NKRFF01201 Superflexible cable RFF 1/2” -50 GHFNKRFF01202 Superflexible cable RFF 1/2” -50 BHFNKRFF01204 Superflexible cable RFF 1/2” -50 BHF

(UL) CATVR E205016NKRFF01400 Superflexible cable RFF 1/4” -50NKRFF01402 Superflexible cable RFF 1/4” -50 BHFNKRFF01404 Superflexible cable RFF 1/4” -50 BHF

(UL) CATVR E205016NKRFF03800 Superflexible cable RFF 3/8” -50NKRFF03802 Superflexible cable RFF 3/8” -50 BHFNKRFF03804 Superflexible cable RFF 3/8” -50 BHF

(UL) CATVR E205016

NKRF01200 Feeder cable RF 1/2”-50NKRF01201 Feeder cable RF 1/2”-50 GHFNKRF01202 Feeder cable RF 1/2”-50 BHFNKRF01204 Feeder cable RF 1/2”-50 BHF

(UL) CATVR E205016NKRF03800 Feeder cable RF 3/8”-50NKRF03801 Feeder cable RF 3/8”-50 GHFNKRF03802 Feeder cable RF 3/8”-50 BHFNKRF03804 Feeder cable RF 3/8”-50 BHF



(UL) CATVR E205016NKRF11400 Feeder cable RF 1 1/4”-50NKRF11401 Feeder cable RF 1 1/4”-50 GHFNKRF11402 Feeder cable RF 1 1/4”-50 BHFNKRF15800 Feeder cable RF 1 5/8”-50NKRF15801 Feeder cable RF 1 5/8”-50 GHFNKRF15802 Feeder cable RF 1 5/8”-50 BHFNKRF21400 Feeder cable RF 2 1/4”-50NKRF21401 Feeder cable RF 2 1/4”-50 GHFNKRF21402 Feeder cable RF 2 1/4”-50 BHF

51

1/20

03

Your partner in quality cable solutions

www.drakacomteq.com

Draka NK Cables Ltd., Mobile NetworksP.O.Box 419, FIN-00101 Helsinki, FINLAND

Tel. +358 10 5661, Fax +358 9 529 841www.nkcables.fi

Documents

NK Cables Antenna Line Products · NK Cables NK Cables has been a recognised supplier of cables since 1912. We work under the Draka Comteq marketing label, combining communication