Embed Size (px)
Citation preview
107
13.5
G52SH
7.6
*All specifications are subject to change without notice
Ningbo Yunsheng High-tech
Magnetics Co., Ltd.
DEMAGNETIZATION CURVES/MAGNETIC CHARACTERISTICS
DEMAGNETIZATION CURVE
MAGNETIC CHARACTERISTICS PHYSICAL PROPERTIES
Remanent flux density
Br
[T] 1.42~1.47 Density
ρ g/cm3
(kG) 14.2~14.7
Coercivity
HcB
[kA/m] ≥ 4 Curie Temperature
Tc ℃ 310
(kOe) ≥
Intrinsic Coercivity
HcJ
[kA/m] ≥1592 Bending Strength MPa 150~380
(kOe) ≥20 Compressive Strength MPa 600~1200
Maximum energy product
(BH)max
[kJ/m3] 390～422 Electrical Resistivity Ω·mm²/m 1.25~1.55
(MGOe) 49~53 Vickers Hardness Hv 460~660
Temperature Coefficient
(RT - 100°C)
αBr [%/°C] -0.115 Thermal Expansion
Coefficient (100℃)
∥(×10-6
/K) 6
αHcj [%/°C] -0.62 ⊥(×10-6
/K) -1
Temperature Coefficient
(RT - 150°C)
αBr [%/°C] -0.125
αHcj [%/°C] -0.57
Maximum operating temp. ★ °C 150
Relative recoil permeability μrec 1.05
*[ ]：in the unit of SI
( )：in the unit of CGS
★：The specification of the test sample is φ 10×7 column
13.7~14.2
1.37~1.427.6
G48UH
*All specifications are subject to change without notice
Ningbo Yunsheng High-tech
Magnetics Co., Ltd.
DEMAGNETIZATION CURVES/MAGNETIC CHARACTERISTICS
DEMAGNETIZATION CURVE
MAGNETIC CHARACTERISTICS PHYSICAL PROPERTIES
Remanent flux density
Br
[T] Density
ρ g/cm3
(kG)
Coercivity
HcB
[kA/m] ≥1035 Curie Temperature
Tc ℃ 330
(kOe) ≥13
Intrinsic Coercivity
HcJ
[kA/m] ≥1990 Bending Strength MPa 150~380
(kOe) ≥25 Compressive Strength MPa 600~1200
Maximum energy product
(BH)max
[kJ/m3] 358~390 Electrical Resistivity Ω·mm²/m 1.25~1.55
(MGOe) 45~49 Vickers Hardness Hv 460~660
Temperature Coefficient
(RT - 100°C)
αBr [%/°C] -0.10 Thermal Expansion
Coefficient (100℃)
∥(×10-6
/K) 6
αHcj [%/°C] -0.58 ⊥(×10-6
/K) -1
Temperature Coefficient
(RT - 180°C)
αBr [%/°C] -0.12
αHcj [%/°C] -0.52
Maximum operating temp. ★ °C 180
Relative recoil permeability μrec 1.05
*[ ]：in the unit of SI
( )：in the unit of CGS
★：The specification of the test sample is φ 10×7 column
1050
13.2
0.48
0.135
56
15
7.6
G50UH
*All specifications are subject to change without notice
Ningbo Yunsheng High-tech
Magnetics Co., Ltd.
DEMAGNETIZATION CURVES/MAGNETIC CHARACTERISTICS
DEMAGNETIZATION CURVE
MAGNETIC CHARACTERISTICS PHYSICAL PROPERTIES
Remanent flux density
Br
[T] 1.39~1.44 Density
ρ g/cm3
(kG) 13.9~14.4
Coercivity
HcB
[kA/m] ≥ Curie Temperature
Tc ℃ 330
(kOe) ≥
Intrinsic Coercivity
HcJ
[kA/m] ≥1990 Bending Strength MPa 150~380
(kOe) ≥25 Compressive Strength MPa 600~1200
Maximum energy product
(BH)max
[kJ/m3] 374～406 Electrical Resistivity Ω·mm²/m 1.25~1.55
(MGOe) 47~51 Vickers Hardness Hv 460~660
Temperature Coefficient
(RT - 100°C)
αBr [%/°C] -0.1 Thermal Expansion
Coefficient (100℃)
∥(×10-6
/K) 6
αHcj [%/°C] -0. ⊥(×10-6
/K) -1
Temperature Coefficient
(RT - 180°C)
αBr [%/°C] -
αHcj [%/°C] -
Maximum operating temp. ★ °C 180
Relative recoil permeability μrec 1.05
*[ ]：in the unit of SI
( )：in the unit of CGS
★：The specification of the test sample is φ 10×7 column
7.6
0.46
50.13
0.11
G45EH
*All specifications are subject to change without notice
Ningbo Yunsheng High-tech
Magnetics Co., Ltd.
DEMAGNETIZATION CURVES/MAGNETIC CHARACTERISTICS
DEMAGNETIZATION CURVE
MAGNETIC CHARACTERISTICS PHYSICAL PROPERTIES
Remanent flux density
Br
[T] 1.32~1.36 Density
ρ g/cm3
(kG) 13.2~13.6
Coercivity
HcB
[kA/m] ≥1003 Curie Temperature
Tc ℃ 330
(kOe) ≥12.6
Intrinsic Coercivity
HcJ
[kA/m] ≥2388 Bending Strength MPa 150~380
(kOe) ≥30 Compressive Strength MPa 600~1200
Maximum energy product
(BH)max
[kJ/m3] 342～366 Electrical Resistivity Ω·mm²/m 1.25~1.55
(MGOe) 43~46 Vickers Hardness Hv 600~800
Temperature Coefficient
(RT - 100°C)
αBr [%/°C] - Thermal Expansion
Coefficient (100℃)
∥(×10-6
/K) 6
αHcj [%/°C] -0.55 ⊥(×10-6
/K) -1
Temperature Coefficient
(RT - 200°C)
αBr [%/°C] -
αHcj [%/°C] -
Maximum operating temp. ★ °C 200
Relative recoil permeability μrec 1.05
*[ ]：in the unit of SI
( )：in the unit of CGS
★：The specification of the test sample is φ 10×7 column
737~
G48EH
*All specifications are subject to change without notice
Ningbo Yunsheng High-techMagnetics Co., Ltd.
DEMAGNETIZATION CURVES/MAGNETIC CHARACTERISTICS
DEMAGNETIZATION CURVE
MAGNETIC CHARACTERISTICS PHYSICAL PROPERTIESRemanent flux densityBr
[T] 1. ~1.42 Densityρ
g/cm3 7.6(kG) 13. 14.2
CoercivityHcB
[kA/m] ≥1035 Curie TemperatureTc
℃ 330(kOe) ≥13
Intrinsic CoercivityHcJ
[kA/m] ≥2388 Bending Strength MPa 150~380(kOe) ≥30 Compressive Strength MPa 600~1200
Maximum energy product(BH)max
[kJ/m3] 358~390 Electrical Resistivity Ω·mm²/m 1.25~1.55
(MGOe) 45~49 Vickers Hardness Hv 460~660
Temperature Coefficient(RT - 100°C)
αBr [%/°C] -0.109 Thermal ExpansionCoefficient (100℃)
∥(×10-6/K) 6αHcj [%/°C] -0.5 ⊥(×10-6/K) -1
Temperature Coefficient(RT - 180°C)
αBr [%/°C] -0.125αHcj [%/°C] -0.44
Maximum operating temp. ★ °C 200Relative recoil permeability μrec 1.05*[ ]：in the unit of SI
( )：in the unit of CGS★：The specification of the test sample isφ10×7 column
0.125
7.6
971
12.2
2786
35
G42AH
*All specifications are subject to change without notice
Ningbo Yunsheng High-tech
Magnetics Co., Ltd.
DEMAGNETIZATION CURVES/MAGNETIC CHARACTERISTICS
DEMAGNETIZATION CURVE
MAGNETIC CHARACTERISTICS PHYSICAL PROPERTIES
Remanent flux density
Br
[T] 1.28~1.32 Density
ρ g/cm3
(kG) 12.8~13.2
Coercivity
HcB
[kA/m] ≥ Curie Temperature
Tc ℃ 330
(kOe) ≥
Intrinsic Coercivity
HcJ
[kA/m] ≥ Bending Strength MPa 150~380
(kOe) ≥ Compressive Strength MPa 600~1200
Maximum energy product
(BH)max
[kJ/m3] 310～342 Electrical Resistivity Ω·mm²/m 1.25~1.55
(MGOe) 39~43 Vickers Hardness Hv 600~800
Temperature Coefficient
(RT - 100°C)
α Br [%/°C] -0.10 Thermal Expansion
Coefficient (100℃)
∥(×10-6
/K) 6
α Hcj [%/°C] -0.51 ⊥(×10-6
/K) -1
Temperature Coefficient
(RT - 200°C)
α Br [%/°C] -
α Hcj [%/°C] -0.43
Maximum operating temp. ★ °C 240
Relative recoil permeability μ rec 1.05
*[ ]：in the unit of SI
( )：in the unit of CGS
★：The specification of the test sample is φ 10×7 column
