Nice Ball Bearings - AHR International · bearing manufacturers. Starting with unground ball bearing types and progressing into fully ground types, NICE today produces a complete

Nice Ball Bearings

®

In 1902, William Nice foundedone of the first “anti-friction”bearing manufacturers. Startingwith unground ball bearing typesand progressing into fully groundtypes, NICE today produces acomplete line of precision ground,semi-ground and, ungroundbearings and bearing assemblies.NICE is a leading manufacturer ofhigh quality inch series andspecialty ball bearings for theautomotive, agricultural, lawnequipment, semiconductor,medical and material handlingindustries.

NICE Precision GroundProduct

NICE Ball Bearings produces acomplete line of high quality,competitively priced precisionground and semi-ground ballbearings. The standard bearingsare manufactured in easy to useinch dimensions and arerecommended for medium loads

and speeds up to 5000 rpm. They are available with nylon retainersas standard. Steel and stainlesssteel retainers for many sizes canbe supplied as an option. Theprecision ground products are alsoavailable in a variety of seal orshield combinations. Specialneeds—including non-standard ormetric dimensions and bearingsmade of various specialty steels—can also be supplied.

NICE UngroundIndustrial Product

NICE Ball Bearings produces acomplete line of unground radial,thrust and combination radial andthrust ball bearings for applicationswhere the speeds are low and theprecision of a ground bearing isneither required nor cost effective.These products are full ballcomplement designs featuringunitized assembly for ease ofinstallation.

The NICE Advantage

U. S. Made - Manufactured in theUnited States, NICE productsconsistently offer high quality, fastdelivery and low freight costs.

Technical Support - A full staff ofapplication and design engineersoffers fast, efficient response totechnical questions and solutionsbased new or special productdesigns.

High Quality - NICEmanufacturing facilities operateunder a total quality systemutilizing statistical process control,resulting in the consistent supplyof high quality products.

Superior Availability & FillRates - Utilization of a “make toforecast” planning process anddomestic manufacture results inshort lead times, high reliabilityand low freight costs.

Sales Support - Sold exclusivelyby SKF/MRC, with sales officeslocated nationwide.

3

TABLE of Contents

4

5

6-7

8-9

10-11

12-13

14-15

16-17

18-19

20-21

22-23

24-27

28-31

SELECTIONGUIDE

PRODUCTFEATURES

1600SERIES

3000SERIES

6900SERIES

7500SERIES

7600SERIES

400SERIES

5000SERIES

500SERIES

600SERIES

ENG.DATA

SPECIALS& APPS

Product Selection Guide

Product Features

1600 SeriesPrecision Ground Radial Bearings

3000 SeriesSemi-Ground Radial Bearings

600 SeriesUnground Thrust Bearings

Specials and Applications

Engineering Data

500 SeriesSingle Row Unground Combination Radial and Thrust Bearings

5000 SeriesSingle Row Unground Flanged Radial Bearings

400 SeriesSingle Row Unground Radial Bearings

6900 SeriesSemi-Ground Radial Bearings, Extended Inner with Flanged Housing

7500 SeriesHeavy Duty Precision Ground Radial Bearings

7600 SeriesHeavy Duty Precision Ground Radial Bearings with Extended Inner Ring

4

Thrust bearings carry loads appliedparallel to the axis of the bearingbore. They are not designed to ac-commodate radial loads.

Combination radial and thrust bearings aredesigned for simultaneously applied thrustand radial loads. Combination assemblieswill also carry pure thrust loading; however,they are not recommended for straightradial loads unless provisions are made tokeep the inner rings and outer rings in propercontact with the balls.

Radial bearings are designed prima-rily to carry loads perpendicular tothe axis of the bearing bore. Theywill also accommodate limited thrustloading or a combination radial andthrust load.

PRODUCT Selection Guide

7500

7600

6900

3/16"-1 5/16"

1/2"-1 1/4"

Ground SurfacesNICE Ball Bearings, Inc. produces a full

line of ground, semi-ground, and ungroundbearing assemblies. To choose the exact bearingyou need, start with the Nice line of standardinch-dimension, radial, angular contact and thrustball bearings. Standard series bearings can becustomized to include many features that cansatisfy the demands of many special applications.They are available with special bores, modifiedouter ring shapes, extended inner rings, lockingdevices, and flanged housings. Standards can beordered sealed, shielded, or open, and are offeredin ground and semi-ground grades to deliver themost cost effective solution for your application.

If you are now designing with only ABEC-1level or higher bearings, chances are there maybe a more economical solution to your applica-tion. A Nice application engineer can help youdetermine the exact precision your designrequires, and show you how to take advantageof the savings, selection and special featuresavailable in our standard series. Even when astandard isn't the answer, our engineers candeliver an economical, modified standarddesign that is "fit for purpose."

Nice Standard Product Line

Raceways

Bore, O.D.,Faces

Ground

Series TypeClass Bore Range

RadialExtended

Inner

Radial

(Retainer)Radial

1600

(FullComplement)

Radial

400

Radial/Thrust500

600 Thrust

ModifiedStandards

andSpecials

All Radial

Retainerand FullTypes

ThrustRadial/Thrust

AnyCombination

3/16"-2"

1/4"-2 1/4"

1/4"-1 1/2"

3/16"-2"

1.1.1.1.1. 2.2.2.2.2. 3.3.3.3.3.

Three basic ball bearing types are illustrated to assist inproper design selection

DESIGNDESIGNDESIGNDESIGNDESIGN

Many sizes and types of the three basic designs illustrated are available for selection from this catalog.However, if you have an unusual application problem, NICE field and factory engineers will be gladto give you the benefit of their specialized training and broad practical experience.

Semi-Ground

RadialFlanged

ExtendedInner

Raceways,O.D., Faces

3/8"-1"

Unground

(Retainer) Radial

3000 OuterRaceways,O.D., Faces

3/16"-1"

5

PRODUCT Features

Modified Standards

Modified standard bearings feature a standardcage and ball complement or a full ball complement,with custom engineered modifications to the otherbearing components. The exact inner and outer ringdimensions and designs can be combined with a widerange of seals, shields, special greases, special materialsand special finishes.

Modification instead of full customizing gives the userthe benefits of a fully custom bearing with lower costsand faster delivery times. Prototype lots are readilyaffordable and available for testing and evaluation.

Modified standard bearings offer the greatest valuefor your bearing dollar by offering custom bearingsat standard prices. Here are some of the many wayswe can modify standard ball bearings to fit anyapplication.

Outer Rings

Outer rings can be custom engineered to include milledslots, snap rings, track grooves, or even a variety ofplastic tires. Add to this flanges or pulley units and avariety of custom solutions are readily available.

Inner Rings

A variety of bore shapes and sizes can be customengineered to simplify mounting procedures, reduceassembly costs, and allow misalignment.

Splined Bore D-Shaped Bore

Hex Bore Solid Inner Ring

Milled Slots Sphered

Materials and Finishes

Nice has extensive experience with a variety ofspecial materials and finishes developed to stand upto various contaminants or to take unusually hardwear. Nice bearings are made from steels of variouschemical compositions. Carburizing grades are casehardened to desired depths and hardness values forwear and breakdown resistance. High carbonchrome alloy steels are through hardened for highwear and fatigue resistance. Stainless steels areavailable for corrosion resistance and food serviceapplications. Special platings and finishes such aszinc, black oxide, and thin dense chrome are avail-able for special applications. Nice application engi-neers can assist in bearing selection for special mate-rial applications.

Track Groove Polyurethane Tire

6

Width for sealed versions = 0.3125Width for sealed versions = 0.3438

Weights given are for greased and sealed versions

Multi-part sealsO.D. Tolerance +.0000/-.0006

1600 Series Precision Ground Radial Bearings

BOREd

(in)+.0000/- .0005

O.D.D

(in)+.0000/- .0005

PRINCIPAL DIMENSIONS

1602DC1603DC1604DC1605DC1606DC1607DC1614DC1615DC1616DC1620DC1621DC1623DC1628DC1630DC1633DC1635DC1638DC1640DC1641DC1652DC1654DC1657DC

BEARING NUMBER

1602DS1603DS

1604DS

1605DS1606DS

1607DS

1614DS1615DS

1616DS

1620DS1621DS

1623DS

1628DS1630DS

1633DS

1635DS1638DS

1640DS

1641DS1652DS

1654DS

1657DS

1602SC

1603SC

1604SC1605SC

1606SC

1607SC1614SC

1615SC

1616SC1620SC

1621SC

1623SC1628SC

1630SC

1633SC1635SC

1638SC

1640SC1641SC

1652SC

1654SC1657SC

0.6875

0.8750

0.87500.9063

0.9063

0.90631.1250

1.1250

1.12501.3750

1.3750

1.37501.6250

1.6250

1.75001.7500

2.0000

2.00002.0000

2.5000

2.50002.5625

1602SS

1603SS

1604SS1605SS

1606SS

1607SS1614SS

1615SS

1616SS1620SS

1621SS

1623SS1628SS

1630SS

1633SS1635SS

1638SS

1640SS1641SS

1652SS

1654SS1657SS

1602NS

1603NS

1604NS1605NS

1606NS

1607NS1614NS

1615NS

1616NS1620NS

1621NS

1623NS1628NS

1630NS

1633NS1635NS

1638NS

1640NS1641NS

1652NS

1654NS1657NS

0.2500

0.3125

0.37500.3125

0.3750

0.43750.3750

0.4375

0.50000.4375

0.5000

0.62500.6250

0.7500

0.62500.7500

0.7500

0.87501.0000

1.1250

1.25001.2500

1

32

4

1

2

3

4

• PRECISION GROUND ON ALL CONTACTSURFACES

• EASY TO USE INCH DIMENSIONS

• MEDIUM LOADS

• MAX SPEED RANGE - 5000 - 6000 RPM

• THROUGH HARDENED BEARING STEEL

• NYLON RETAINER STANDARD

• GREASED, DOUBLE SEALED OR DOUBLESHIELDED STANDARD

• AVAILABLE SINGLE SEALED OR SINGLESHIELDED, OPEN, AND WITH OR WITHOUTGREASE

DOUBLE SEAL SINGLE SEAL DOUBLE SHIELD SINGLE SHIELD OPEN

5

4

5

5

5

5

5

5

4

4

4

7

1600 Series Precision Ground Radial BearingsPrecision ground 1600 series bearings are specially

designed to provide a line of low cost yet high qualitybearings for adaptation to a majority of precision bearingapplications. They are made in easy to use inch dimen-sions and are recommended for medium loads and formaximum speeds in the range of 5000 rpm.

The 1600 series bearings are precision ground on allsurfaces with exceptional care given to the ball grooves.Careful heat treatment provides a uniform and exactdegree of hardness for maximum life. A ball retainer, orseparator, is used to increase the range of allowable speedsby reducing ball-to-ball contact friction. The 1600 seriesradial bearings are available open, single or doubledshielded, or single or double sealed. Double sealed anddouble shielded bearings are supplied grease packed asstandard. Open and single closure bearings can besupplied greased on request.

B

Dd

TO CLEAR r

C(lb)

WIDTHB

(in)+.0000/-.005

DYNAMIC STATICCO

(lb)

BASIC LOADRATINGS

511

644

644698

698

6981200

1200

12001878

1878

18782600

2600

26002600

2967

29672967

3864

38645360

WEIGHT ABUTMENT AND FILLET DIMENSIONS

170

255

255300

300

300475

475

475850

850

8501010

1010

10251025

1350

13501350

2120

21202620

0.330

0.474

0.4740.503

0.517

0.5170.595

0.622

0.6220.658

0.720

0.7530.845

0.965

0.8450.965

0.988

1.1131.197

1.375

1.5001.500

0.02

0.030.03

0.04

0.040.03

0.06

0.060.06

0.12

0.110.10

0.18

0.160.22

0.20

0.320.26

0.38

0.460.51

0.57

0.614

0.778

0.7780.778

0.778

0.7781.014

1.014

1.0141.203

1.203

1.2031.446

1.446

1.5301.530

1.760

1.7601.760

2.244

2.2442.314

0.012

0.012

0.0150.012

0.015

0.0150.025

0.025

0.0250.025

0.025

0.0250.025

0.025

0.0250.025

0.035

0.0350.035

0.035

0.0350.035

0.2500

0.2813

0.28130.3125

0.3125

0.31250.3750

0.3750

0.37500.4375

0.4375

0.43750.5000

0.5000

0.50000.5000

0.5625

0.56250.5625

0.6250

0.62500.6875

1

2

2

W(lb)

3 da min(in)

Da max(in)

r max(in)

8

3000 Series Semi-Ground Radial Bearings

• PRECISION GROUND ON ALL CONTACTSURFACES EXCEPT BORE


• ECONOMICAL BEARING FOR LIGHTERLOADS THAN THE 1600 SERIES


• HARDENED BEARING STEEL


• GREASED, DOUBLE SEALED OR DOUBLESHIELDED STANDARD

• AVAILABLE SINGLE SEALED OR SINGLESHIELDED, OPEN, AND WITH OR WITHOUTGREASE


BOREd

(in)+.005/-.000

BEARING NUMBER

O.D.D

(in)+.0000/-.0005

DOUBLE SEAL SINGLE SEAL DOUBLE SHIELD SINGLE SHIELD OPEN

1

32

Width for sealed versions = 0.3125

Width for sealed versions = 0.3438

Weights given are for greased and sealed versionsMulti-part seal

O.D. Tolerance +.0000/-.00064

1

2

3

4

3002DC

3003DC

3004DC3005DC

3006DC

3007DC3014DC

3015DC

3016DC3020DC

3021DC

3023DC3028DC

3030DC

3033DC3035DC

3038DC

3040DC3041DC

3002SC

3003SC

3004SC3005SC

3006SC

3007SC3014SC

3015SC

3016SC3020SC

3021SC

3023SC3028SC

3030SC

3033SC3035SC

3038SC

3040SC3041SC

3002SS

3003SS

3004SS3005SS

3006SS

3007SS3014SS

3015SS

3016SS3020SS

3021SS

3023SS3028SS

3030SS

3033SS3035SS

3038SS

3040SS3041SS

3002NS

3003NS

3004NS3005NS

3006NS

3007NS3014NS

3015NS

3016NS3020NS

3021NS

3023NS3028NS

3030NS

3033NS3035NS

3038NS

3040NS3041NS

0.2500

0.3125

0.37500.3125

0.3750

0.43750.3750

0.4375

0.50000.4375

0.5000

0.62500.6250

0.7500

0.62500.7500

0.7500

0.87501.0000

0.6875

0.8750

0.87500.9063

0.9063

0.90631.1250

1.1250

1.12501.3750

1.3750

1.37501.6250

1.6250

1.75001.7500

2.0000

2.00002.0000

3002DS3003DS

3004DS

3005DS3006DS

3007DS

3014DS3015DS

3016DS

3020DS3021DS

3023DS

3028DS3030DS

3033DS

3035DS3038DS

3040DS

3041DS

4

5

5

5

5

5

5

9

3000 Series Semi-Ground Radial BearingsSemi-ground 3000 series bearings are specially

designed to provide a line of economical bearings forlighter loads than the 1600 series and speeds to approxi-mately 2500 rpm. The 3000 series bearings are dimension-ally the same as the 1600 series bearings, except for theprecision of the inner ring (as machined tolerances).Careful heat treatment provides a uniform and exactdegree of hardness for maximum life.

The 3000 series bearings are precision ground to thesame close tolerances on the O.D. as the 1600 series withexceptional care given to the ball grooves. A ball retainer,or separator, is employed to increase the range of allow-able speeds by reducing ball contact friction. The 3000series radial bearing is available open, single or doubledshielded, or single or double sealed. The double shieldedand double sealed versions are grease packed as standard.Open and single closure bearings can be furnished with orwithout grease as desired.

B

Dd

TO CLEAR r

BASIC LOADRATINGS

WEIGHT ABUTMENT AND FILLET DIMENSIONS

C(lb)

r max(in)

da min(in)

Da max(in)

WIDTHB

(in)+.0000/-.005

DYNAMIC STATICCO

(lb)W(lb)

3

255325

325

350350

350

600600

600

940940

940

13001300

1300

13001480

1480

1480

0.020.03

0.03

0.040.04

0.03

0.060.06

0.06

0.120.11

0.10

0.180.16

0.22

0.220.32

0.29

0.26

170255

255

300300

300

475475

475

850850

850

10101010

1025

10251350

1350

1350

0.6140.778

0.778

0.7780.778

0.778

1.0141.014

1.014

1.2031.203

1.203

1.4461.446

1.530

1.5301.760

1.760

1.760

0.3300.474

0.474

0.5030.517

0.517

0.5950.622

0.622

0.6580.720

0.753

0.8450.965

0.845

0.9650.988

1.113

1.197

0.0120.012

0.015

0.0120.015

0.015

0.0250.025

0.025

0.0250.025

0.025

0.0250.025

0.025

0.0250.035

0.035

0.035

0.25000.2813

0.2813

0.31250.3125

0.3125

0.37500.3750

0.3750

0.43750.4375

0.4375

0.50000.5000

0.5000

0.50000.5625

0.5625

0.5625

2

2

1

10

6900 Series Semi-Ground Radial Bearings, Extended Inner with Flanged Housing

PRINCIPAL DIMENSIONSASSEMBLYNUMBER

69066908691069126916

C(in)

E(in)

F(in)

G(in)Bolt

Centers

H(in)

0.3750.5000.6250.7501.000

0.90631.62501.62502.00002.0000

0.31250.50000.50000.56250.5625

0.68751.00001.00001.06251.0625

0.5550.9950.9951.2931.293

0.3750.5000.5000.5000.500

1.8752.8752.8753.2503.250

2.5003.7503.7504.1254.125


• MEDIUM LOADS


• THROUGH HARDENED

• RETAINER DESIGN


• DOUBLE SEALED STANDARD

• EXTENDED INNER RING WITH TWO SETSCREWS

• BEARINGS ARE AVAILABLE WITH ORWITHOUT FLANGE

1

2

O.D.Tolerance for 6912 and larger is +.0000/-.0006Weights given are for flanged versions.

1

d(in)

Bore+.005/-.000

B(in)

+.000/-.005

D(in)

O.D.+.0000/-.0005

FLANGEDUNIT

BEARINGONLY

6906 - B6908 - B6910 - B6912 - B6916 - B

1

1 1

11

W(lb)

WEIGHTBASIC LOAD

RATINGS

DYNAMICC

(lb)

STATICCO(lb)

6900 Series Semi-Ground Radial Bearings, Extended Inner with Flanged Housing

J(in)

OverallWidth

K(in)

L(in)

M(in)

N(in)

O

2-SetScrews

P(in)

HoleDia.

S(in)


1.1251.8751.8752.2502.250

0.34380.68750.68750.68750.6875

0.34380.43750.43750.43750.4375

0.68751.00001.00001.12501.1250

0.0350.0620.0620.0620.062

8-321/4-281/4-281/4-2810-32

0.31250.43750.43750.43750.4375

00.010.01

0.0620.062

0.070.350.320.550.33

The 6900 series consists of a double sealed, groundbearing with an extended inner ring. It is provided withtwo set screws and a flanged housing designed for flushmounting. Bearings are supplied assembled in thehousing. Flanged and non-flanged units are availablefrom stock.

The pressed steel flanged housing provides asecure yet inexpensive means for holding the bearingin place. Although these units are not of the self-aligning type, they will accommodate a limitedamount of angular misalignment.

For less exacting applications involving light loadsand speeds up to 2500 rpm, semi-ground type bearingsmay be specified in lieu of a precision ground bearing ata cost savings. These assemblies are generally producedto order and may or may not be in stock. Contact yourNice sales representative or customer service for moreinformation.

2

FLANGED UNIT

BEARING ONLY

5801610161018701870

3001000100013501350

C

D

BF

Ed

M

LK

J

O

S

N

GH

P

12

7500 Series Heavy Duty Precision Ground Radial Bearings


7508751075127514751675187520

• PRECISION GROUND ON ALL CONTACTSURFACES, SIMILAR TO THE 1600 SERIES


• MEDIUM LOADS


• THROUGH HARDENED BEARING STEEL

• RETAINER DESIGN



• HIGHLY EFFECTIVE SINGLE LIP CONTACTSEAL WITH TRASH GUARD

• AVAILABLE SINGLE SEALED OR OPEN

• ALL BEARINGS HAVE A SNAP RING GROOVE(SNAP RING ASSEMBLED AS AN OPTION)

• RECOMMENDED FOR APPLICATIONS WHEREACCURATE, QUIET PERFORMANCE ANDSUPERIOR SEALING ARE REQUIRED

BASICBEARINGNUMBER

F(in)

1.0091.0091.0091.3061.3061.6721.672

INNER WIDTHC

(in)+.000/-.005

0.7500.7500.7500.7500.7500.8750.875

A(in)

0.06250.06250.06250.06250.06250.06250.0625

OUTER WIDTHB

(in)+.000/-.005

0.6250.6250.6250.6250.6250.7500.750

O.D.D

(in)+.0000/-.0005

1.75001.75001.75002.00002.00002.56252.5625

BOREd

(in)+.0000/-.0005

0.5000.6250.7500.8751.0001.1251.250

O.D.Tolerance for 7514 and larger is +.0000/-.0006

Radius R indicates the maximum fillet radius in housing or shaft which bearing will clearWeights given are for greased and sealed versions

1

2

3

11

11

13

R(in)

Radius

7500 Series Heavy Duty Precision Ground Radial Bearings


1.5001.5001.5001.7501.7502.3122.312

0.7500.8751.0001.1251.2501.3751.500

W(lb)

0.3300.2900.3100.3600.3300.7950.565

0.0350.0350.0350.0350.0350.0350.035

J(in)

1.92191.92191.92192.15632.15632.76562.7656

H(in)

G(in)

+.000- .005

0.1360.1360.1360.1360.1360.1900.190

WEIGHTABUTMENT AND FILLET

DIMENSIONS

r max(in)

Da max(in)

da min(in)

0.0420.0420.0420.0420.0420.0650.065

0.0350.0350.0350.0350.0350.0350.035

The Nice 7500 series bearings are single rowretainer type radial bearings, similar in construction tothe 1600 series. They incorporate a highly effectivesingle lip contact seal, with metal guard. The inner andouter rings are turned from chrome steel and aftercareful heat treatment the through hardened rings areaccurately ground to close tolerances.

The 7500 series bearings are recommended for appli-cations requiring the accuracy of rotation and quietperformance of close tolerance precision grade bearings,and where a superior seal is required to retain lubricantand keep the bearing free from dust and dirt.

Normally double sealed (type DL), the 7500 seriesbearings can be produced to order with seals on one sideonly (type SL) or without seals (type NL). Double sealedbearings are grease packed as standard; however, all typescan be furnished with or without grease packing asdesired. All types are provided with a snap ring groove,with the snap ring assembled on the bearing as an option.

2 3

d

A A

F D

BC

H

J

G

BASIC LOADRATINGS

DYNAMICC

(lb)

STATICCO(lb)

2595259525952970297053605360

1010101010101350135026202620

14

7600 Series Heavy Duty Precision Ground Radial Bearings with Extended Inner Ring


760876097610761176127613761476157616761776187620

• PRECISION GROUND ON ALL CONTACTSURFACES, SIMILAR TO THE 1600 SERIES


• MEDIUM LOADS


• THROUGH HARDENED

• CAGED DESIGN

• NYLON CAGE STANDARD


• HIGHLY EFFICIENT SINGLE LIP CONTACTSEAL

• AVAILABLE SINGLE SEALED OR OPEN

• EXTENDED INNER RING WITH SET SCREWS

• ALL BEARINGS HAVE A SNAP RINGGROOVE, SNAP RING ASSEMBLED AS ANOPTION

• RECOMMENDED FOR APPLICATIONS WHEREACCURATE, QUIET PERFORMANCE ANDSUPERIOR SEALING ARE REQUIRED

BASICBEARINGNUMBER

0.1360.1360.1360.1360.1360.1360.1360.1360.1360.1900.1900.190

1.0091.0091.0091.0091.0091.3061.3061.3061.3061.6721.6721.672

A(in)

0.06250.06250.06250.06250.06250.06250.06250.06250.06250.06250.06250.0625

OUTER WIDTHB

(in)+.000/-.005

0.6250.6250.6250.6250.6250.6250.6250.6250.6250.7500.7500.750

O.D.D

(in)+.0000/-.0005

1.75001.75001.75001.75001.75002.00002.00002.00002.00002.56252.56252.5625

BOREd

(in)+.0008/-.0000

G(in)

+.005/-.005

F(in)

.5000

.5625

.6250

.6875

.7500

.8125

.8750

.93751.00001.06251.12501.2500

1

2

3

O.D. Tolerance for 7613 and larger is +.0000/-.0006

Radius R indicates the maximum fillet radius in housing or shaft which bearing will clearWeights given are for greased and sealed versions

1

1

1

1

1

1

1

15

W(lb)

WEIGHT

7600 Series Heavy Duty Precision Ground Radial Bearings with Extended Inner Ring


0.0350.0350.0350.0350.0350.0350.0350.0350.0350.0350.0350.035

10-3210-3210-3210-3210-321/4-281/4-281/4-2810-321/4-281/4-281/4-28

0.2330.2330.2330.2330.2330.2610.2610.2610.2610.2610.2610.261

0.4050.4050.4050.4050.4050.4920.4920.4920.4920.6050.6050.605

0.0420.0420.0420.0420.0420.0420.0420.0420.0420.0650.0650.065

1.92191.92191.92191.92191.92192.15632.15632.15632.15632.76562.76562.7656

0.360.340.320.300.280.450.430.400.360.840.800.71

H(in)

J(in)

INNER WIDTHK

(in)+.000/-.005

R(in)

Radius

L(in)

M(in)

N

2 setscrews

1.0921.0921.0921.0921.0921.1791.1791.1791.1791.4171.4171.417

The Nice 7600 series bearings are single row retainertype radial bearings similar in construction to the 1600series. They incorporate a highly efficient single lip contactseal with metal guard. The inner and outer rings areturned from chrome steel and after careful heat treatmentthe through hardened rings are accurately ground to closetolerances. The inner ring is extended and contains setscrews whereas the 7500 series bearing does not.

The 7600 series bearings are recommended for appli-cations requiring the accuracy of rotation and quietperformance of close limit precision grade bearings, andwhere a superior seal is required to retain lubricant andkeep the bearing free from dust and dirt.

Normally double sealed (type DL), the 7600 seriesbearings can be produced to order with seals on one sideonly (type SL) or without seals (type NL). Double sealedbearings are grease packed as standard; however, all typescan be furnished with or without grease packing asdesired. All types are provided with a snap ring groove,with the snap ring assembled on the bearing as an option.

2 3

D

A

K

L

d

N

B

H

J

G

F

BASIC LOADRATINGS

DYNAMICC

(lb)

STATICCO(lb)

259525952595259525952970297029702970536053605360

101010101010101010101350135013501350262026202620

M

16

400 Series Single Row Unground Radial Bearings

BEARING DIMENSIONAL DATABASIC

BEARINGNUMBER

Size

1/81/81/81/81/81/81/81/81/81/85/325/325/325/323/163/163/163/163/161/41/41/45/1611/320.375

BALLS

No.

10141414151616161818151616161616171718141723202121

0.2500.2500.2500.2500.3120.2500.2500.3750.3750.3750.4060.3120.3120.3120.5000.5000.5000.5000.5000.3750.6250.6870.7500.8750.937

0.2500.2500.2500.2500.3120.2500.2500.3750.3750.3750.3700.3120.3120.3120.4700.4700.4370.4370.3750.5620.5720.6870.7500.8750.937

0.6870.8750.8750.8750.9371.0621.0621.0621.1251.1251.1251.2811.2811.2811.3751.3751.5001.5001.6251.7502.0002.6252.7503.0933.375

0.2500.2500.3120.3750.3750.2500.3750.3750.3750.4370.5000.3120.3750.3750.5000.6250.5000.6250.7500.7501.0001.2501.5001.7502.000

BOREd

(in)+0.005/-0.000

O.D.D

(in)+0.005/-0.000

WIDTHA(in)

+0.010/-0.010

WIDTHB

(in)Reference

NOTESBALLS - Carbon Steel Grade 200

RINGS - Carbon Steel, Case HardenedBANDS - 1010 Carbon Steel, Soft

Bearings supplied prelubricated with grease

• RADIAL UNGROUND BEARING• EASY TO USE INCH DIMENSIONS• MODERATE LOADS• MAX SPEED RANGE - 1000 - 1200 RPM• HARDENED RINGS• FULL COMPLEMENT OF BALLS• FULLY UNITIZED ASSEMBLY

• BEARING SUPPLIED PRE-GREASED STANDARD

402-2V400-4V400-5V400-6V400-12V400-14V404-16V400-18V400-20V400-21V407-22V400-23V400-24V400-26V408-28V410-30V400-31V400-33V412-35V400-36V416-41V400-47V424-51V400-55V400-59V

17

400 Series Single Row Unground Radial Bearings

The Nice 400 series of unground radial ball bearingsare designed for moderate loads and speeds whererunning accuracy and noise level requirements do notwarrant the more expensive precision ground bearings.This series of bearings feature a full ball complementwithout a retainer and a soft steel band on the outer ring.This permits the bearing to be pressed into a housingwithout the necessity of close housing tolerances. Thebearings are designed for use in applications with speedsnot exceeding 1200 rpm.

0.020.030.030.030.040.050.040.070.080.070.650.090.090.090.120.100.160.140.140.220.300.750.801.101.35

110156156156167178178178200200200275275275375375400400450625757

1020139017702100

77108108108116124124124139139139193193193261261279279313430525710967

12251458

5375757580858585969696

133133133180180192192216300362490670847

1010

4360606065696969787878

107107107145145155155174240293395540683817

3042424245484848545454757575

101101108108121168204275376477567

21303030323434343838385252527171767685

117142193264332396

WEIGHTW(lb)

REVOLUTIONS PER MINUTE

120010050 200 600300

RADIAL CAPACITY (LBS)

D d

A

B

18

5000 Series Single Row Unground Flanged Radial Bearings

BEARING DIMENSIONAL DATABASIC

BEARINGNUMBER

5561-V5543-V5507-V5368-V5491-V5881-V5273-V5327-V5281-V5891-V5875-V5418-V

BOREA

(in)+0.005/-0.000

O.D.B

(in)+0.005/-0.000

OUTER WIDTHC(in)

+0.010/-0.010

D(in)

E(in)

F(in)

INNER WIDTHG

(in)±.010

0.2500.3750.3120.3750.5000.5000.6250.5000.5000.7500.7501.000

0.6870.9061.1251.1251.1251.3751.3751.5001.5781.7502.0002.000

0.2500.3050.3850.3850.3850.4630.4630.4470.5150.5950.5720.572

0.0470.0400.0620.0620.0620.0620.0620.0620.1400.0930.0930.093

0.7501.0001.2501.2501.2501.5001.5001.6561.6871.8752.1252.125

0.0500.0880.1250.1250.1250.1250.1250.1250.2340.1560.2180.218

0.2500.3500.4370.4370.4370.5460.5460.5310.6090.6870.7180.718

• RADIAL UNGROUND BEARING


• MODERATE LOADS


• HARDENED RINGS

• FULL COMPLEMENT OF BALLS

• FULLY UNITIZED ASSEMBLY

• FLANGE ON O.D. LOCATES BEARING IN TUBE OR HOUSING

• BEARING SUPPLIED PRE-GREASED STANDARD


RINGS - Carbon Steel, Case Hardened

BANDS - 1010 Carbon Steel, SoftBearings supplied prelubricated with grease

19

5000 Series Single Row Unground Flanged Radial Bearings

The 5000 series of bearings is similar in constructionto the 400 series except it has a flange on the outer ring tolocate the bearing when pressed into a tube or housing,thus eliminating the need for an external mounting device.The bearings are designed for moderate loads and speedswhere running accuracy and noise level requirements donot warrant the more expensive precision ground bearings.This series of bearings feature a full ball complementwithout a retainer. The rings are case hardened and the softsteel band on the outer ring of the unitized assembly allowsthe bearing to be pressed into a housing without the neces-sity of close housing tolerances. The bearings are suppliedpre-greased as a standard. The bearings are designed foruse in applications with speeds not exceeding 1200 rpm.



BALLS

NO. SIZE 120060030020010050

W(lb)

0.020.040.080.070.070.120.100.160.230.280.320.30

101515151516161712151717

1/81/85/325/325/323/163/163/161/41/41/41/4

110167200200200375375492535625757757

77116139139139261261342367430525525

5380969696

180180236258300362362

4365787878

145145190206240293293

3045545454

101101132144168204204

2132383838717192

100117142142

B A E

D

C

F

G

WEIGHT

20

500 Series Single Row Unground Combination Radial and Thrust Bearings

BEARING DIMENSIONAL DATA

BASICBEARINGNUMBER

O.D.B

(in)+0.005/-0.000

WIDTHC

(in)+0.010/-0.010

D(in)

+0.015/-0.015

1

E(in)

RADIUSR

(in)

No. Size

COMBINED RADIAL

10


0.2500.3750.4370.4370.4370.5000.6250.7500.8751.000 T81.125 T101.250 T101.312 T10

0.6881.0620.8120.9061.0471.1251.3591.5941.6872.0471.8122.3075 T102.3075 T10

0.2500.4060.2190.2810.3590.3440.4220.5000.4690.6090.4220.5940.609

0.2190.3440.1870.2500.3120.3120.3750.4220.4220.5470.3440.5470.531

0.5000.7190.6250.6880.7500.8751.0471.2501.2811.6251.4381.8441.844

0.0940.1720.0780.0940.1720.1410.1720.2030.1880.2190.1410.2500.234

0.010.060.010.040.040.060.080.140.080.250.100.280.30

501503504505507508511512513515516517518

11112016111316141514241719

• ANGULAR CONTACT UNGROUND BEARING


• MODERATE LOADS


• HARDENED RINGS

• FULL COMPLEMENT OF BALLS

• FULLY UNITIZED ASSEMBLY

1

BALLS 50

BOREA

(in)+0.005/-0.000

1WEIGHT

W(lb)

TRTR

1/83/163/321/8

3/163/163/161/41/4

5/163/165/169/32

72162

73105177190235366393573354696630

48108

4970

118127157244262382236464420

50115

5273

125136167260273400250490442

337735498391

111173182267167327295

Maximum fillet radius on shaft which the bearing will clear

T8 = +.008/-.000

T10 = +.010/-.000

2

2

2

2

2




21

500 Series Single Row Unground Combination Radial and Thrust Bearings


500 1000250100

THRUST CAPACITY IN POUNDS


10 50 100 250 500 1000

AND THRUST CAPACITY IN POUNDS

TRTRTRTR

153415223740497681

11873

144130

184018264448599198

14288

173156

25562536616681

126135197122239217

43964462

105113140217233339209412373

58130

5984

142154189294315459284558505

71161

73104176190234364390569351691625

717

711182125394060387366

1025101627313758609057

10999

1123111527283555578553

10493

163516224042528285

12779

156139

153415223740507783

12174

147133

23512333566174

116124181112220199

23531735596578

121131189118230208

358025528898

117182196284177345312

B A

R

D

C

E

The Nice 500 series of unground combination radialand thrust bearings are designed for applications where apure radial bearing or a pure thrust bearing would beunsuitable. The Nice 500 Series is an angular contactbearing designed for applications where thrust and/orradial load carrying capability is required.

22

BEARING DIMENSIONAL DATA

600 Series Unground Thrust Bearings

BOREA

(in)+.000/-.010

BOREA1(in)

+/- .010

HEIGHTC

(in)+/- .010 SizeNo.

1014

15

1012

16

1215

17

1218

16

1819

23

2325

BALLS WEIGHTW

(lbs)

601-V602-V602 3/4-V603-V603 1/4-V605-V606-V607-V608-V609-V610-V610-1/4V611-V613-V616-V619-V621-V

.250

.375

.453

.500

.500

.625

.625

.750

.875

1.000

1.0001.016

1.063

1.1251.250

1.437

1.500

.275

.400

.478

.525

.525

.656

.656

.775

.900

1.075

1.0311.031

1.094

1.1501.275

1.462

1.525

1 27/32

1 3/641 55/64

1 17/64

11 1/8

1 27/64

1 21/321 57/64

2

1 31/321 3/4

1 31/32

2 3/322 11/32

2 15/32

2 19/32

.333

.359

.281

.437

.344

.344

.453

.545

.594

.630

.625

.625

.625

.625

.625

.625

.625

0.03

0.060.03

0.09

0.040.04

0.12

0.190.28

0.30

0.290.21

0.26

0.310.40

0.43

0.45

5/32

5/321/8

1/4

3/165/32

1/4

1/41/4

3/8

1/41/4

1/4

1/41/4

1/4

1/4

BASICBEARINGNUMBER

O.D.B

(in)Max. ±.010

• UNGROUND THRUST BEARING

• EASY TO USE INCH DIMENSIONS• MODERATE LOADS• MAX SPEED RANGE - 1000 - 1200 RPM

• HARDENED RINGS• FULL COMPLEMENT OF BALLS• SOFT STEEL BAND OFFERS EASE OF INSTAL-

LATION• UPPER RING IS FREE TO ROTATE AND HAS

CLOSE FIT FOR SHAFTS

• LOWER RING IS FIXED AND HAS SHAFT CLEAR-ANCE IN THE BORE




23

600 Series Unground Thrust Bearings

The Nice 600 series is designed for moderate speeds andmedium thrust loads. These bearings utilize a full ballcomplement. Rings are cold forged from hardenable stripsteel and are carefully heat treated. These bearings may beplated or manufactured from stainless steel upon request.

The entire assembly is housed in a soft steel band whichlends itself to an easy press fit into a housing. The band alsoserves as a dust shield and helps retain the bearing lubricant.The upper ring is free to rotate in the band and has a close fitin the bore for the shaft. The lower ring is fixed in the bandand has a shaft clearance in the bore.

10 100050025010050



5304

426

292780

526

858936

1170

13261706

1404

12481404

1482

17941794

1950

246

344

236630

425

693750

945

10711378

1134

10081134

1197

14491449

1575

182

254

174465

314

511558

698

7911017

837

744837

883

10691069

1162

71

100

68182

123

200218

273

309398

328

291328

346

419419

455

51

71

48129

87

143155

194

220284

233

207233

246

298298

324

98

138

94252

170

277302

378

428551

454

403454

479

579579

630

24

The methods, equations, and technical datapresented in this section allow the user to select thecorrect bearings and estimate their performance for awide range of applications. These calculations applyto Nice's selection of ground and semi-groundproduct lines, namely the 1600, 3000, 6900, 7500, and7600 series. For applications with unusual operatingconditions, Nice can provide engineering assistanceand recommend the most suitable bearing design.

Where standard bearings cannot be used, Nice canmeet the application requirements with a specialbearing design specifically tailored for optimumperformance. Contact your RBC Sales Engineer forspecial sizes, materials, application requirements,dimensions, and tolerances.

Capacity and Fatigue Lifeof Ball Bearings

The BASIC DYNAMIC LOAD RATING, C, or"dynamic capacity," for a ball bearing is that calcu-lated, constant radial load at which a group ofapparently identical bearings with a stationary outerring can statistically endure one million revolutionsof the inner ring.

The BASIC STATIC LOAD RATING, Co, or "staticcapacity," is that uniformly distributed load, whichproduces a maximum theoretical contact stress onthe most heavily loaded ball of 609,000 psi. At thiscontact stress, a permanent deformation of ball andraceway occurs. This deformation is approximately0.01% of the ball diameter in inches.

The RATING LIFE L10, is a statistical measure of thelife which 90% of a group of apparently identicalball bearings will achieve or exceed. For a singlebearing L10 also refers to the life associated with 90%reliability. Median Life, L50, is the life which 50% ofthe group of ball bearings will achieve or exceed.Median life is usually not greater than five timesthe rating life.

The relationship between rating life, load rating andload is:

L10 = (C/P)3

with L10 = rating life (103 rev)C = basic load rating (lb)P = equivalent radial load (lb)

To obtain the rating life in hours, use:

L10 hrs = 16667/N * (C/P)3

with N= speed (rpm)

The Equivalent Radial Load is defined as:

P = XFr + YFa

with Fr = radial load (lb) Fa= axial load (lb) X = see table below Y = see table below

For radial contact ball bearings calculate P withX = 1.0 and Y=1.0. Then recalculate P with X = 0.56and Y from the chart below. Use the larger value ofP to determine L10 life.

BEARING Engineering Data

Fand2 Y

2550

100150200300500750

1000

2.301.991.711.551.451.311.151.041.00

with n = number of balls d = diameter of balls

25


Operating Temperature

Maximum recommended operating tempera-tures for Nice ball bearings is a function of thebearing cage, seal, and grease materials used inthe final assembly. For Nice's standard precisionproduct series (600, 3000, 7500, 7600, and 6900) themaximum recommended operating temperature is250°F. Operation at temperatures as high as 300°Fcan be tolerated intermittently. When oper-ating atthe extremes of allowable temperatures, grease maypurge out between the seal lip and the bearing innerring. If this is unacceptable for a particular applica-tion, other design arrangements might be necessary.

Nice's full complement unground series (400, 5000,500, and 600) can operate at higher temperaturesthan above, and will be limited only by choice oflubricant. However, Nice Engineering should beconsulted for application verification.

Limiting Speeds

Limiting operating speed is dependent upon thematerials used in construction and the internaldesign and finishing of the bearing. For Nice'sstandard selection of ball bearings the recommendedspeed limits are as follows:

Retainers/Cages

Nice precision ground ball bearings of standardproduction are fitted with snap-in ball riding retain-ing cages made from heat stabilized polyamide 6/6.For special applications or design requirements cagesmade of special materials can be supplied. Theseinclude pressed steel or stainless steel, glass rein-forced polyamide 6/6, and brass. Availability ofbearings fitted with non-standard cages should bechecked before ordering.

Axial Load Capacity

Deep groove ball bearings by nature of their design cancarry axial loads either alone or in combination withradial loads. Axial load capacity of standard bearings is0.5 times the Basic Static Load Rating, CO of that bearing.Smaller bearings should not be subject to a load greaterthan 0.25 times CO. Excessive axial loads can lead toserious reduction of bearing service life.

BearingSeries16003000750076006900400

5000500600

LimitingSpeed (rpm)

500025005000500050001200120010001000

Lubrication

All Nice double sealed and double shielded precisionground bearings (1600, 3000, 7500, 7600, and 6900series) are supplied pre-greased 33% full with ShellAlvania #2 grease.

Shell Alvania #2 is a general purpose lithium soapgrease with a useful temperature range of -40°F to+280°F. Single closure and open bearings are suppliedslushed with a rust preservative. Nice can supplybearings with a wide variety of greases by specialorder, some of which are listed below. Contact NiceEngineering for details.

Manufacturer Product Trade Name Temperature Range (°F)

GREASES

Amoco Amolith#2 -40 to +250

Chevron Ultra Duty#1 -20 to +350 Chevron SRI-2 -22 to +347

Dupont Krytox 240 AC -30 to +550

Exxon Unirex #2 -40 to +400 Exxon Andok C +14 to +250

Mobil Mobilgrease 28 -65 to +250

Shell Alvania #2 -40 to +284 Shell Alvania #3 -40 to +284

Shell Dolium R -40 to +320

Shell Darina AX -40 to +320

26


Misalignment

Radial deep groove ball bearings do have theability to accomodate a limited amount of angularmisalignment. The amount of angular misalign-ment that can be tolerated before adverselyeffecting bearing performance is a function of avariety of parameters. Internal radial clearance,internal design, applied loads, and the size of thebearing all play a role in determining thebearing's misalignment capability. Because ofthis, exact values for allowable misalignment arenot provided. Under normal operating condi-tions, a safe estimate of permissable angularmisalignment is usually between .0005 in/in and.003 in/in. Noise levels may increase when thebearing is operating misaligned.

Finish and Accuracy

Nice ball bearings are available in several differentfinish and accuracy grades that may be selected tosuit the functionality of a particular application.

Nice fully ground precision bearings are availablein single row radial configurations. Boundary di-mensions and internal fit-up are held to exactingtolerances by precision grinding of all external sur-faces and both ball grooves. These bearings are rec-ommended for applications requiring quiet run-ning, higher speeds, and applied loads. Normal tol-erances for series 1600, 7500, and 7600 bearings rangefrom 0.0005" to 0.001". See product tables for exacttolerances.

Nice functional precision and unground bearingsare designed for those applications where speedsand loads are moderate, and running accuracyand noise requirements do not warrant a fullyground precision bearing. Single row radial,single row angular contact, and thrust ball bear-ings can be supplied in semi-ground or ungroundaccuracy. Series 3000, 6900, 400, 5000, 500, and600 bearings are available with functional toler-ances that range from 0.005" to 0.010". See prod-uct tables for exact tolerances.

DC Seal RS1P Seal DS Shield

DL Seal Old ShieldsSuper-Ag Seal

Seals and Shields

Contact seals are used on bearings to prevent solidcontaminants and moisture from entering the bear-ing while retaining the lubricant in the bearing. Nicedesign and field experience has resulted in a varietyof heavy duty and effective sealing designs.

The Nice RS1P seal, which is standard on the 1600,3000, and 6900 series bearings, is made of oil andwear resistant synthetic rubber with a steel rein-forcement. The sealing action is accomplished viainterference (deflection) of the seal lip against arecess in the inner ring shoulder. The outside diam-eter of the seal is retained in a recess groove cut intothe outer ring. The DC seal is an old style multi-partassembly consisting of a nylon seal insert held inplace with a metal shield. It is a cost effective sealused only on a few sizes and specials. The Nice DLand Super Ag seals are special high efficiency con-tact seals for heavy duty applications. They areconstructed of synthetic rubber molded to the backof a metal shroud or guard. The seal lip rides in alabyrinth groove for reduced seal drag and lowertorque against the inner ring land surface.

Bearings fitted with non-contacting metal shields areprimarily intended for applications where the innerring rotates and low drag torque is a requirement.They retain the grease at normal operating speedsand temperatures while protecting the bearing fromcontamination. Metal shields are also utilized inapplications wherecontaminants maypose a threat to theseal materials.

27


Recommended Shaft and Housing Fits

Proper mounting fits of ball bearings to shafts and in housings are critical to their performance. Exces-sively tight or excessively loose fits can result in premature bearing failures. Recommended fit values havebeen established which will facilitate optimum bearing performance.

The shaft and housing fits listed below apply to the Nice 1600 and 7500 series bearings. They may also beused for the housing fits only on the 3000, 7600, and 6900 series bearings.

SHAFT FITS

0.00100.00100.0010

0.00100.00100.0010

0.00100.00100.0010

0.00100.00100.0010

0.00100.00100.0010

0.00050.00000.0000

0.00000.00000.0000

0.00000.00000.0000

0.00000.00000.0000

0.00000.00000.0000

0.18700.24950.3120

0.37450.43700.4995

0.56200.62450.7495

0.87450.99951.1245

1.24951.31201.3740

0.00100.00050.0005

0.00050.00050.0005

0.00000.00050.0005

0.00030.00030.0003

0.00030.00030.0003

0.00050.00050.0005

0.00050.00050.0005

0.00050.00050.0005

0.00070.00070.0007

0.00070.00070.0007

0.18650.24950.3120

0.37450.43700.4995

0.56200.62450.7495

0.87470.99971.1247

1.24971.31221.3747

0.18700.25000.3125

0.37500.43750.5000

0.56250.62500.7500

0.87521.00021.1252

1.25021.31271.3752

0.18050.24950.3120

0.37450.43750.4995

0.56200.62450.7495

0.87450.99951.1245

1.24051.31201.3745

BEARINGBORE

DIAMETERMIN

SHAFT ROTATING SHAFT STATIONARYShaftDia

TheoreticalFit

MAX

TheoreticalFit

ShaftDia

SHAFT FITS

MAX MIN

0.18750.25000.3125

0.37500.43750.5000

0.56250.62500.7500

0.87501.00001.1250

1.25001.31251.3750

TIGHT TIGHTLOOSE LOOSEMAX MAX

0.62520.68870.7502

0.87520.90651.1252

1.37521.62521.7502

1.87522.00022.1252

2.25022.50022.5627

0.62500.68750.7500

0.87500.90631.1250

1.37501.62501.7500

1.87502.00002.1250

2.25002.50002.5625

0.62450.68700.7495

0.87450.90581.1245

1.37451.62451.7495

1.87451.99942.1244

2.24942.49942.5619

TIGHT LOOSE LOOSETIGHT MIN

BEARINGOUTSIDE

DIAMETERMIN

HOUSING ROTATING HOUSING STATIONARYHousing Inside

DiaTheoretical

FitMAX

TheoreticalFit

Housing InsideDia

HOUSING FITS

MAX

0.62450.68700.7495

0.87450.90581.1242

1.37421.62421.7492

1.87421.99902.1240

2.24902.49902.5615

MAX MIN

0.18650.24900.3115

0.37400.43650.4990

0.56150.62400.7490

0.87400.99901.1240

1.24901.31151.3740

Radial Internal Clearance

All Nice single row deep groove ball bearings are designed and produced with radial internal clearance toprovide for optimum performance. Nice ball bearings are supplied with "normal" radial clearance as standard, butcan be ordered with radial clearance tighter than normal or looser than normal as a special item. The values listedin the table below apply to bearings before mounting and under no load and are supplied as a design guide. Con-sult Nice engineering when ordering other than normal radial clearance.

RADIAL INTERNAL CLEARANCE (.0001) INCH

EXTRA LOOSEMIN.-MAX.

10 - 2510 - 7010 - 2510 - 2510 - 25

------

LOOSEMIN.-MAX.

7 - 2210 - 607 - 227 - 22

10 - 40------

TIGHTMIN.-MAX.

2 - 610 - 40

2 - 62 - 6

10 - 20------

NORMALMIN.-MAX.

2 - 1210 - 502 - 122 - 12

10 - 3010 - 7010 - 70

PRECISION LEVELSERIES / TYPE

1600/GROUND3000/SEMI-GROUND7500/GROUND7600/GROUND6900/SEMI-GROUND400/UNGROUND500/UNGROUND

0.00050.00050.0005

0.00050.00050.0008

0.00080.00080.0008

0.00080.00100.0010

0.00100.00100.0010

0.00070.00070.0007

0.00070.00070.0007

0.00070.00070.0007

0.00080.00080.0008

0.00080.00080.0008

0.62550.68800.7505

0.87550.90681.1255

1.37551.62581.7508

1.87582.00102.1260

2.25102.50102.5635

0.62500.68750.7500

0.87500.96031.1250

1.37502.00002.2125

1.87502.00002.1250

2.25002.50002.5625

0.00000.00000.0000

0.00000.00000.0000

0.00000.00000.0000

0.00000.00000.0000

0.00000.00000.0000

0.00100.00100.0010

0.00100.00100.0010

0.00100.00130.0013

0.00130.00160.0016

0.00160.00160.0016

28

AGRICULTURE Applications

The 8403-1V is another radial ballbearing cam follower. It is used toguide hay rake tine bars on agriculturalequipment. It features a spherical O.D.to accommodate any angular misalign-ment. It has two seals on one side and afully enclosed dust shield on the otherto keep dirt and hay debris out of thebearing.

The Nice 7227-4V stud mountedcam follower bearing is utilized in haytine rake applications. It employsspecially designed heavy duty seals towithstand the harsh working environ-ment. It features an internal hex socketfor ease of installation.

The Nice 8212-1TN radial ballbearing features special land ridingseals and an extended inner ring. It isdimensionally unique and is used inhay baler rakes to support the tine barshafts. It is designed to withstand theharsh environment and heavy loadsthat it encounters.

www.rbcbearings.com

29

SPECIALS and Applications

WOODWORKINGMACHINERY

The Nice 8224-TN is a fully groundradial ball bearing featuring a trackwheel configuration on the O.D. of thebearing. In addition, there is a four-point contact in the ball grooves tominimize the radial and axial play. Thisbearing is used to guide a radial armsaw along a linear track. Accuracy andrepeatability are paramount in thisapplication.

URETHANETIRE

PUMPS AND METERS

The 7473-J1 radial bearing featuresall stainless steel construction includingthe ball retainer. This precision groundbearing is used in a gas meter pumpwhere it is immersed in gasoline. Ittherefore is not lubricated. This applica-tion requires a high degree of corrosionresistance, accuracy, and reliability.

CANNING ANDBOTTLING MACHINERY

The 8317-TN is a fully groundradial ball bearing featuring a moldedurethane tire on the O.D. of the bearing.It is used in a bottle making machine toguide the bottles. The soft urethane tireminimizes handling damage due tocontact with the bearing.

COMMERCIALMOWERS

The Nice 7488-8 TNN RLD radialball bearing is unique due to itsground inch dimension bore and theground metric O.D. It is used in avariety of applications including lawnmower decks and conveyors. Itfeatures low torque seals for easierstart up and a special radial play rangefor pre-loading. The seals also have anoutboard dust shield for protectionfrom debris.

LOW TORQUESEALS

30

MATERIAL

The Nice 7868-5TN radial ballbearing features special low torqueland riding seals. The seals also havean outboard dust shield for protectionfrom debris. One application for thisdesign is an idler sprocket in chaindrives. It has an inch dimensionunground bore to facilitate mountingon standard fasteners. The bearinginternal geometry and outer ring O.D.are ground to precision tolerances forsmoother operation. It also featuresan extended inner ring on both sidesto accommodate mounting clearances.

The CONV3Y4-TN is a fullyground conveyor bearing for higherload ratings and ease of installation.It is used in material handling applica-tions. It features a milled slot on theO.D. for ease of installation as well asa heavy-duty seal for protection fromcoal dust, dirt, etc. The fully encloseddust shield, in addition to the solidwasher in the bore, effectively elimi-nates lubricant leakage thus allowingfor a “sealed-for-life” bearing.

The CB504-TN heavy duty radialball bearing is designed for long anddependable life in idler roller applica-tions for bulk handling belt conveyors.The specially designed hexagonal boreaccepts hexagonal shaped stub shafts ina ball and socket arrangement. Thisallows for a wide range of conveyortrough angles.

DUST SHIELD

HEX BORE

SEAL

www.rbcbearings.com

Handling

STEERING Column and Strut Bearings

The Nice 8408-1V is a full comple-ment, angular contact ball bearingused in steering column applications.It incorporates precise yet economicalsolid races, and features a groundO.D. for close-tolerance housing fits.

The 8493-V is a thrust ball bearingin which one of the rings is partiallyencapsulated in plastic. It is used infront strut mount applications of frontwheel drive automobiles. It has theadvantage of combining low mount-ing height, low weight, and reducedoperational noise.

The Nice NB543-1DCTN radialbearing is a fully ground doublesealed thin section bearing. It is usedin the headset of high-end bicycles.Because of shock loads, severe envi-ronmental conditions and the neces-sity of smooth feel for the rider, thisbearing requires a high degree ofaccuracy and reliability. Unique metalbacked nitrile seals are utilized toretain a special water-resistant greasefor a greased for life bearing.

www.rbcbearings.com31

STEERING

Nice Speciality Bearings

1510 Gehman RoadKulpsville, PA 19443

SKF USA Inc.1-888-753-3477

MRC Bearing Services1-800-MRC-7000

SKF USA Inc. is the authorized distributor for Nice Ball Bearings, Inc.® SKF is a registered trademark of SKF USA Inc.Although care has been taken to assure the accuracy of the data compiled in this publication, SKF does not assume liability for errorsor omissions.© 2000 SKF USA Inc. Publication 990-700 (10M/FG 6/2000) version 6/2000 Printed in U.S.A.

Documents

Nice Ball Bearings - AHR International · bearing manufacturers. Starting with unground ball bearing types and progressing into fully ground types, NICE today produces a complete