Upload
djamil-sakhri
View
152
Download
3
Embed Size (px)
Citation preview
Niagara Conservation Corporation
is a prime global source for energy
and water conservation products
and programs worldwide. Unlike
our competitors we are a vertical
manufacturer and have grown our
company and facilities to provide
you the highest quality products at
the best possible prices.
Riyadh, Saudi Arabia
Cedar Knolls, New JerseyFort Worth, Texas Xiamen, China
Products That Save Water Without Sacrificing Performance
2
PLUMBING & water effIcIeNt ProdUcts
Western Water Closets, Eastern Water Closets and Ceramics
Plumbing Accessories
Mixers
Showerheads
4
20
22
29
3
Aerators
Retail Products
Accessories
Certifications
46
59
61
68
PLUMBING & water effIcIeNt ProdUcts
Innovative Toilets
The Niagara patented toilet line features revolutionary Stealth Technology and Tip-Bucket Technology, creating a high-performance flush at 3.0, 3.8, 4.8 or 6 LPF. This means water and utility bill savings without sacrificing performance and satisfaction.
Among our toilets’ superior features are a minimal maintenance flush system, eliminating the need to replace flappers, chains and levers. No double-flushing is required. All technologies have fixed flush rates so the products ensure a true 3.0, 3.8, 4.8 or 6 liter flush everytime.
A Niagara toilet is not only the perfect choice for new construction, but its large footprint and oversized structure makes it ideal for retrofitting, too – there is no need to replace floor tiles or boards, as the Flapperless will cover the pre-existing footprint. All Niagara toilets are guaranteed for 10 years any manufacturing related defects, parts and porcelain.
Patented...leak-free...superior flush performance
WESTERN WATER CLoSETS
4
5
Unsurpassed SavingsNiagara Conservation has the world’s most efficient toilet at 3 LPF (0.8 GPF) and, it will save an additional 37% more water when compared to an HET rated toilet.
CERAMICS
Service InstallationNiagara Conservation has a team of trained plumbers that are available to install any of our plumbing products. These plumbers are available to install during new construction as well as Retro-Fitting programs. This added service eases the minds of our clients and allows for all the coordination of delivery and installation by the trusted Niagara plumbing team.
6
UHET Stealth® 3.0 LPF (0.8 GPF)
The Stealth® is the world’s only 3.0 LPF (0.8 GPF) Ultra High-Efficiency Toilet that goes a step beyond the standard water-saving toilets available on the market. With its low-profile body, breakthrough patented hydraulic technology, and the quietest flush on the planet, Stealth’s unique design has revolutionized the toilet industry.
As water fills the tank, energy is harnessed and a patented air-transfer system exerts pressure in the bowl’s trapway. Activated by simply pressing the flush button, all the waste in the bowl is cleared with a single, powerful and quiet flush.
Item Number Description
N7714-TME Tank
N7716-TME Round Bowl "S" Trap
N7717-TME Elongated Bowl "S" Trap
N7718-TME Round Bowl "P" Trap
N7799-TME Elongated Bowl "P" Trap
STEALTH FLUSH TECHNOLOGY
•Tank with patented Stealth® vacuum-assist flush technology
•MaP Score: 600 g
•More than 67,000 liters of annual water savings
•Polished chrome top-mount flush actuator
•10-year warranty against any manufacturing related defects, spare parts & porcelain
•SASo certified
Water exiting the tank cleans the bowl and flushes waste down the trapway.
Inside the inner chamber, the exiting water creates a vacuum effect that depressurizes the trapway.
The trapway is completely filled producing an extremely efficient flush.
As the trapway depressurizes, a suction force is created that pulls the wastewater into the trapway.
Filling
air water
Water fills the tank and inner chamber, forcing air to the top of the chamber and down the transfer tube.
Positive pressure is exerted on the water in the bowl by the air being forced through the transfer tube into the trapway.
A larger water surface area is created in the bowl due to the pressurized trapway.
Flushing
Back outlet
air water
7 7
Stealth® 3.0 LPF (0.8 GPF)
AssEmblED DImENsIoNsN7718-TME: 711 mm (28") x 476 mm (18.8") x 762 mm (30")N7799-TME: 765 mm(30") x 476 mm (18-3/4") x 790 mm (31")
RoUgH-INN7718-TME: 102 mm (4") High OutletN7799-TME: 102 mm (4")
PAckAgINgClose-Coupled, Two-Piece Toilet (Bowl Model: N7718 or N7799; Tank Model: N7714)
mATERIAlsVitreous China – White Finish
PRoDUcT sPEcIfIcATIoNs
•Ultra high-efficiency 3.0 liters (0.8 gallons) of water per flush
•N7718-TmE: 406 mm (16") High Bowl
•N7799-TmE: 435 mm (17") High Bowl
•Fully glazed trapway, 51 mm (2")
•Large water area, 203 mm x 152 mm (8"x6")
•N7718-TmE: Large foot print, 585 mm x 260 mm (23" x 10.25")
•N7799-TmE:Large foot print, 625 mm x 260 mm (24.625” x 10.25”)
•Polished chrome top-mount flush actuator
cERTIfIcATIoNMeets or exceeds the following: ASME A112.19.2 / CSA B45.1
AssEmblED DImENsIoNsN7716-TmE: 685 mm (27") x 476 mm (18.75") x 762 mm (30")
N7717-TmE: 732 mm (28.875") x 476 mm (18.75") x 788 mm (31")
RoUgH-IN305 mm (12")
PAckAgINgClose-Coupled, Two-Piece Toilet (Bowl Model: N7716 or 7717; Tank Model: N7714)
mATERIAlsVitreous China – White Finish
PRoDUcT sPEcIfIcATIoNs•Ultra high-efficiency 3 liters (0.8 gallons) of water per flush
•Round, 406 mm (16") high bowl
•Elongated, 432 mm (17") high bowl (meets ADA chair height requirements)
•Floor mounted, floor outlet
•Fully glazed trapway, 51 mm (2")
•Large water area, 203 mm x 152 mm (8" x6")
•Large foot print, 520 mm x 260 mm (20.5" x 10.25")
cERTIfIcATIoN(s)Meets or exceeds the following: ASME A112.19.2 / CSA B45.1, WaterSense Certified
N7716-TME/N7717-TME
N7718-TME/N7799-TME
N7717-TME
N7716-TME685 mm (27")
232 mm (9.125")
420 mm (16.5")
762 mm (30")
305 mm (12")
406 mm (16")
476 mm (18.75")
260 mm(10.25")
520 mm (20.5")
C/L of Outlet
732 mm (28.875")
232 mm (9.125")
470 mm (18.5")
788 mm (31")
305 mm (12")
432 mm (17")
476 mm (18.75")
260 mm (10.25")
520 mm (20.5")
C/L of Outlet
711 mm (28")
232 mm(9.1")
762
mm
(30"
) 420 mm(16.5")
406 mm(16")
102 mm(4")
314 mm (12.4") (10.25")260 mm
476 mm(18.8")
260 mm(10.25")
585 mm(23")
N7718-TME
N7799-TME
435 mm(17")
240 mm(9.5")
102 mm(4")
260 mm(10.25")
800 mm(31.5")
355 mm(14")
470 mm(18.5")
625 mm24.6"
260 mm(10.25")
8
AssEmblED DImENsIoNsN2225E: 762 mm (30") x 451 mm (17.75") x 787 mm (31")
N2225R: 711 mm (28") x 451 mm (17.75") x 724 mm (28.5")
RoUgH-INAdjustable 254-305 mm (10-12")
PAckAgINgClose-Coupled, Two-Piece Toilet (Bowl Model: N2225EB/RB; Tank Model: N2225T)
mATERIAlsVitreous China – White Finish
PRoDUcT sPEcIfIcATIoNs
•Fully glazed trapway, 51 mm (2")
•Floor mounted, floor outlet
•Elongated, 419 mm (16.5") high bowl
•Round, 387 mm (15.25") high bowl
cERTIfIcATIoN(s)Meets or exceeds the following: ASME A112.19.2 / CSA B45.1, WaterSense Certified
EcoLogic® Flapperless® Toilet
The EcoLogic® Niagara Flapperless® toilet features revolutionary tip-bucket technology, creating a high-performance flush at only 4.8 liters per flush (1.28 GPF) providing water and utility bill savings without sacrificing performance.
•4.8 liters per flush (1.28 GPF)
•Gravity with Flapperless® Tip-Bucket Technology
•MaP Score: 1,000 g (round) 800 g (elongated)
•Sweat-free tank
•oversized tank and footprint to cover unsightly wall or floor exposure
•Adjustable rough-in
•opposable handle positioning
• Elongated model meets ADA standard, 432 mm (17") height with seat
•Maintenance-free, leak-free, no double-flushing
•5-year warranty against any manufacturing related defects
•Seat included; gentle-close seat available by special order
Item Number Description
N2225T Tank
N2225EB Elongated Bowl
N2225RB Round Bowl
N2225EB
PATENTED FLAPPERLESS® TECHNOLOGY
N2225RB
Leak-Free Tip-Bucket Technology
Fluidmaster® Fill Valve
267 mm-305 mm
(10.5 -12")
711 mm (28")248 mm (9.75")
419 mm (16.5")
419 mm (16.5")
788
mm
(31"
)
521 mm (20.5")
451mm (17.75")
260 mm (10.25")
521 mm (20.5")
762 mm (30")
470 mm (18.5")
419 mm (16.5")788
mm
(31"
)
521 mm (20.5")
451 mm (17.75")
260 mm (10.25")
521 mm (20.5")
248 mm (9.75")
267 mm-305 mm(10.5 -12")
9
AssEmblED DImENsIoNsN2226: 800 mm (31.5") x 508 mm (20") x 762 mm (30")
N2216b: 724 mm (28.5") x 508 mm (20") x 724 mm (28.5")
RoUgH-INAdjustable 254–305 mm (10–12")
PAckAgINgClose-Coupled, Two-Piece Toilet (Bowl Model: N2226, N2216B; Tank Model: N2216T)
mATERIAlsVitreous China – White Finish
PRoDUcT sPEcIfIcATIoNs
•Fully glazed trapway, 51 mm (2")
•Floor mounted, floor outlet
•Elongated, 419 mm (16.5") high bowl
•Round, 387 mm (15.25") high bowl
cERTIfIcATIoN(s)Meets or exceeds the following: ASME A112.19.2 / CSA B45.1, WaterSense Certified
Niagara Flapperless® Toilet
The Niagara Flapperless® toilet features a revolutionary tip-bucket technology, creating a high-performance flush using 6.0 liters per flush (1.6 GPF).
•6.0 liters per flush (1.6 GPF)
•Liter Per Flush Tip-Bucket Technology
•MaP Score: 725 g (Round) 400 g (elongated)
•Sweat-Free Tank
•oversized Tank and Footprint to cover unsightly wall or floor exposure opposable handle positioning
•Adjustable Rough-In
• Elongated model meets ADA standard, 432 mm (17") height with seat
•Maintenance-Free, Leak-Free, no double flushing
•5-year warranty against any manufacturing related defects
•Seat included or upgrade to gentle-close seat
Item Number Description
N2216T Tank
N2226 Elongated Bowl
N2216B Round Bowl
N2216B
N2226
254 mm - 305 mm(10-12")
800 mm (31.5")248 mm (9.75")
475 mm (18.5")
419 mm (16.5")
762
mm
(30"
)
546 mm (21.5")
521 mm (20.5")
260 mm (10.25")
546 mm (21.5")
724 mm (28.5")
419 mm (16.5")
387 mm (15.25")724
mm
(28.
5")
521 mm (20.5")
254 mm (10")
508 mm (20")
248 mm (9.75")
254 mm - 305 mm(10-12")
508 mm (20")
PATENTED FLAPPERLESS® TECHNOLOGY
Leak-Free Tip-Bucket Technology
Fluidmaster® Fill Valve
10
450 mm (17.1")
380 mm (15")
125 mm (4.9")
340 mm (13.5")
340 mm - 635 mm (13.5-25")
45mm (1.75")
40 mm (1.5")
34 mm (13.5")
45 mm (1.75")
ADDITIONAL PIPE
500
mm
(19.
7")
260 mm (10.2")
180 mm (7.1")
50 mm (1.9")
290 mm (11.4")
565 mm (22.4")
195 mm (7.7")
200
mm
(7
.9")
150 mm (5.9")
75 mm(2.9")
11 mm (0.4")
55 mm (2.2")
27 mm (1.1")
102 mm (4")
55 mm (2.2")
490 mm (19.3")
SECTION X-X
AssEmblED DImENsIoNs
450 mm (17.1") x 380 mm (15") x 125 mm (4.9")
PAckAgINg
Individually Packed
mATERIAls
Tank: Heat-Resistance durable Polypropylene
closet: Vitreous China - White Finish
Wall Hung Dual Flush Toilet 4.8/3.0 LPF (1.28/0.8 GPF)
The Niagara Wall Hung Dual Flush Tank has the industries lowest dual flush ratings for a wall hung dual flush tank. At 4.8/3.0 liters per flush (1.28/0.8 GPF) we allow for quicker refill times and the ability to retrofit your current tank with ease as every tank comes with our adjustable pipe.
•Wall hung tank
•Dual flush 4.8/3.0 LPF (1.28/0.8 GPF)
•Additional 34 cm (13.5") pipe length for two wall settings
•Polypropylene–durable, heat-resistant
Item Number Description
N2373 Tank
N2373-C Closet
TWO POWERFUL FLUSH OPTiONS 4.8 LPF / 3.0 LPF
ADDiTiONAL PiPE iNCLUDED FOR TWO DiFFERENT
WALL SETTiNGS
•5-year warranty against any manufacturing defects
•SASo certified
N2373-C
N2373
N2373-C
N2373
11
194 mm (7.625")
210
mm
(8.2
5")
380 mm (14.9")
368 mm (14.5")
559
mm
(22"
)
400
mm
(15.
75")
73 mm(2.875")
•Elongated front rim design
• Drilled for fixture mounted bidet faucet with horizontal rim spray and wall-mounted vacuum breaker
• Integral overflow
•Mounting hardware included
•Mixer fitting not included
• "P" trap fitting not included
•5-year warranty against any manufacturing related defects
Item Number Description
N2370E Elongated, White
AssEmblED DImENsIoNs559 mm (22") x 380 mm (15") x 368 mm (14.5")
PlUmbINg DImENsIoNsDrain hole: 45 mm (1.75") diameter
configuration: Faucet hole
spray hole: 10 mm (.375") diameter
fAUcET coNfIgURATIoNconfiguration: Faucet deck
faucet hole: 35 mm (1.375") diameter
mATERIAlsVitreous China – White Finish
cERTIfIcATIoN(s)Meets or exceeds the following: ASME A112.19.2 / CSA B45.1
Elongated Front Bidet Fixture
12
•Elongated front rim design
• Drilled for fixture mounted bidet faucet with horizontal rim spray and wall-mounted vacuum breaker
• Integral overflow
•Mounting hardware included
•Mixer fitting not included
• "P" trap fitting not included
•5-year warranty against any manufacturing related defects
Item Number Description
B1040 Elongated, White
AssEmblED DImENsIoNs595 mm (22") x 380 mm (15") x 360 mm (14.5")
PlUmbINg DImENsIoNsDrain hole: 45 mm (1.75") diameter
configuration: Faucet hole
spray hole: 10 mm (.375") diameter
fAUcET coNfIgURATIoNconfiguration: Faucet deck
faucet hole: 35 mm (1.375") diameter
mATERIAlsVitreous China – White Finish
cERTIfIcATIoN(s)Meets or exceeds the following: ASME A112.19.2 / CSA B45.1
Large Elongated Front Bidet Fixture
360 mm (14.2")
595 mm (23.4")
130 mm (5.1")
230 mm (9.1")
360 mm (14.2")
360 mm (14.2")
380 mm (15")
FIXING CENTERS
13
Super Shattaf ® Bidet Sprayer 5.7 LPM (1.5 GPM)
• 5.7 LPM (1.5 GPM) maximum flow at pressure of 410 kPa (60 psi)
•Fully Tamperproof option
• Sprayer maintains pressure of 690 kPa (100 psi)
•Functions at maximum working pressure of 860 kPa (125 psi)
• Handle has two settings: manual and full flow
• PoM screen design is a reinforced cone shape, 6 mm height, able to maintain pressure of 690 kPa (100 psi) and provide improved debris dispersal
•4-o rings prevent from leakage.
•SASo certified
•5-year warranty against any manufacturing related defects
Item Number Description
N2317 White 5.7 LPM (1.5 GPM)
N2317-TP White 5.7 LPM (1.5 GPM) Tamperproof
N2317-VB Vacuum Breaker
AssEmblY DETAIlsConsists of spray body, standard body aerator, hose w/bracket and all internal parts necessary for operation
mATERIAlssprayer body: ABS plastic — White color
Handle Threaded Inlet, Plunger, Aerator body: High polished chrome plated (8H CASS) brass
Internal parts: Brass, stainless steel, spring steel and high heat rubber o-rings and gasket
Hose: 120 cm (47") stainless steel wrapped PVC hose with high polished chrome plated (8H CASS) brass end connectors
bracket: Chrome plated (8H CASS), durable ABS plastic with mounting screws and anchors
Aerator Internal parts: Acetal (POM), high heat rubber gaskets & flow compensator
PAckAgINgIndividually packed bidet sprayer assemblies, packed 1 unit per carton
THREADssprayer Inlet: G1/2-2A NPSM male thread Outlet: 15/16-27 female thread
Aerator Inlet: 15/16-27 male thread, Hose Connections: G1/2-2B female thread
PRoDUcT sPEcIfIcATIoNs• Needle spray pattern consists of (18) holes each 1 mm diameter
•Aerator design unit functions within rated supply temperature from 5 to 71ºC (40 to 160ºF)
•Vacuum Breaker preventing from water back-flow.
cERTIfIcATIoN(s)Meets or exceeds: ASME A112.18.1 / CSA B125.1; Chrome plated parts meet performance requirements for corrosion testing per standard ASTM B368
TAMPERPROOF OPTiON
AVAiLABLE
79 mm(3.1")
89 mm (3.5")
G1/2-2ATHREAD
32 mm(1.25")
122 mm(4.4")
704.0
4.5
5.0
5.5
6.0
140 210 275 345 410 480 550
Flo
w (
LP
M)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
14
AssEmblED DImENsIoNsN2360: 590 mm (23.25") x 440 mm (17.375") x 815 mm (32")
N2361: 500 mm (19.685") x 405 mm (17.375") x 788 mm (32")
PlUmbINg DImENsIoNsDrain hole: 47 mm (1.875") diameter
fAUcET coNfIgURATIoNconfiguration: Faucet hole
faucet hole: 35 mm (1.375") diameter
mATERIAlsVitreous China – White Finish
cERTIfIcATIoN(s)Meets or exceeds the following: ASME A112.19.2 / CSA B45.1
Pedestal Lavatory
Niagara’s Pedestal Lavatory has been created in order the match our line of toilets. These pedestals look great and give a suite feel to any bathroom.
•one-hole center faucet design
•Rear overflow
•Mounting hardware included
•Mixer and trap connections not included
•SASo certified
•5-year warranty against any manufacturing related defects
Item Number Description
N2360L White Lavatory
N2360P White Pedestal
N2361L White Lavatory
N2361P White Pedestal
35 mm (1.375")47 mm (1.875")
441 mm (17.375")
540 mm (21.25")
823
mm
(32.
40")
760
mm
(29.
92")
690
mm
(27.
16")
170 mm (6.7")
285 mm (11.22") 30 x 20 mm (1.2 x 0.8")
200 mm (7.9")
190 mm (7.5")
35 mm (1.375")47 mm (1.875")
441 mm (17.375")
540 mm (21.25")
823
mm
(32.
40")
760
mm
(29.
92")
690
mm
(27.
16")
170 mm (6.7")
285 mm (11.22") 30 x 20 mm (1.2 x 0.8")
200 mm (7.9")
190 mm (7.5")
500 mm (19.7")35 mm (1.7")
115 mm
(4.5")
160
mm
(6.3
")
393
mm
(15.
5")
748
mm
(29.
5") 650 m
m (25.6")
235 mm (9.25")
825 mm
(32.5")
165 mm(6.50")
120 mm (4.75")21.3 mm (0.9")
49 mm (1.9")
500 mm (19.7")35 mm (1.7")
115 mm
(4.5")
160
mm
(6.3
")
393
mm
(15.
5")
748
mm
(29.
5") 650 m
m (25.6")
235 mm (9.25")
825 mm
(32.5")
165 mm(6.50")
120 mm (4.75")21.3 mm (0.9")
49 mm (1.9")
N2361L/P
35 mm (1.375")47 mm (1.875")
441 mm (17.375")
540 mm (21.25")
823
mm
(32.
40")
760
mm
(29.
92")
690
mm
(27.
16")
170 mm (6.7")
285 mm (11.22") 30 x 20 mm (1.2 x 0.8")
200 mm (7.9")
190 mm (7.5")
500 mm (19.7")35 mm (1.7")
115 mm
(4.5")
160
mm
(6.3
")
393
mm
(15.
5")
748
mm
(29.
5") 650 m
m (25.6")
235 mm (9.25")
825 mm
(32.5")
165 mm(6.50")
120 mm (4.75")21.3 mm (0.9")
49 mm (1.9")
N2360 L/P
15
AssEmblED DImENsIoNs610 mm (24.01") x 460 mm (18.10") x 600 mm (23.75")
PlUmbINg DImENsIoNsDrain hole: 47 mm (1.875") diameter
fAUcET coNfIgURATIoNconfiguration: Faucet deck
faucet hole: 35 mm (1.375") diameter
mATERIAlsVitreous China – White Finish
cERTIfIcATIoN(s)Meets or exceeds the following: ASME A112.19.2 / CSA B45.1
Wall Hung Lavatory (Half Pedestal)
With the sleek curves and pristine white glaze the Niagara Wall Hung Lavatory allows this unit to blend in with any bathroom.
•one-hole center faucet design
•Half Pedestal Design
•Front overflow
•Mounting Hardware included
•Mixer and Trap connections not included
•SASo certified
•5-year warranty against any manufacturing related defects
Item Number Description
N2362L White Lavatory
N2362P White Pedestal
35 mm (1.375")
115
mm
(4.5
")
47 mm(1.88")
484 mm (19.05")610 mm (24.01")
290
mm
(11.
40")
460
mm
(18.
10")
580
mm
(22.
8")
530
mm
(20.
9")
625 mm
(24.6")
850 mm
(33.5")
200 mm(7.9")
285 mm(11.22")
80 mm(3.2")
195 mm(7.7")
63 mm(2.6")
195 mm(7.7")
62 mm (2.44")
160
mm
(6.3
")
Under-mount Lavatory
over Counter Drop-In Lavatory
47 mm (1.9")
36
0 m
m (1
4.2
")4
20
mm
(1
6.5
")
500 mm (9.5")
560 mm (22")
420 mm (16.5")
200 mm(7.9")
145 mm(5.7")
36 mm (1.4")
75mm (3")
125 mm (4.9")
47 mm (1.9")
447
mm
(17.
6")
515 mm (20.27")
200
mm
(7.8
")
50 mm (2")
180 mm (7.1")
Niagara’s Under-mount Lavatory features an oval basin that can be paired with any wall mount mixer to enhance any bathroom. This under-mount unit has an elegant but simple look which is great for any bath or powder room.
•oval under-mount sink
•Front overflow
•Unglazed rim for under counter mounting
•Supplied with mounting hardware and template
•Drain hole: 47 mm (1.875") diameter
•Vitreous china – White finish
• Meets or exceeds the following: ASME A112.19.2 / CSA B45.1
•Mixer and trap connections not included
•SASo certified
•5-year warranty against any manufacturing related defects
Niagara’s over Counter Drop in Lavatory features an oval basin that will mount with any lavatory Mixer. This durable simple but elegant lavatory is great for any bath or power room.
•oval drop-in sink
• one-hole center faucet design
• Front overflow
•Mounting hardware included
•Configuration: Faucet deck
•Faucet hole: 35 mm (1.375") diameter
•Vitreous china – White finish
• Meets or exceeds the following: ASME A112.19.2 / CSA B45.1
•Mixer and trap connections not included
•SASo certified
•5-year warranty against any manufacturing related defects
Item Number color
N2364 White
Item Number color
N2365 White
16
Acrylic & Fiber-Glass Bath Tubs
Niagara’s acrylic & fiber-glass bath tubs are simple but elegant. These acrylic bath tubs are easy to conceal in any home and allows for the end user to have a generous 183 cm (6 ft) of space to enjoy there bathing experience.
•Acrylic reinforced bathtub (Available as Fiber-Glass)
•Drop-in installation
•Textured bottom surface
• Integral drainage hole
•Product meets or exceeds the following: ANSI Z124.1.2 / ASME A112.19.7 / ASTM E162 / ASTM E662
•5-year warranty against any manufacturing related defects
Item Number Description
N2375-TUB 170 x 70 x 38 TUB
N2377-TUB 170 x 80 x 35 TUB
N2378-TUB 170 x 70 x 40 TUB
17
N2378-TUB
N2375-TUB
N2377-TUB
AssEmblED DImENsIoNs170 cm (66.92") x 70 cm (27.56") x 38 cm (13")
mATERIAlsGlass fiber reinforced plastic (acrylic) – white finish
PAckAgINgIndividually Packed
cERTIfIcATIoN(s)Meets or exceeds the following: ANSI Z124.1.2 / ASME A112.19.7 / ASTM E162 / ASTM E662
AssEmblED DImENsIoNs170 cm (66.92") x 80 cm (31.50") x 35 cm (13.78")
mATERIAlsGlass fiber reinforced plastic (acrylic) – white finish
PAckAgINgIndividually Packed
cERTIfIcATIoN(s)Meets or exceeds the following: ANSI Z124.1.2 / ASME A112.19.7 / ASTM E162 / ASTM E662
40 cm(15.75")
44cm(17.375”)
170 cm (66.9")
170 cm (66.9")
70 c
m (2
7.4"
)
70 cm (27.4")
AssEmblED DImENsIoNs170 cm (66.92") x 70 cm (27.56") x 40 cm (15.75")
mATERIAlsGlass fiber reinforced plastic (acrylic) – white finish
PAckAgINgIndividually Packed
cERTIfIcATIoN(s)Meets or exceeds the following: ANSI Z124.1.2 / ASME A112.19.7 / ASTM E162 / ASTM E662
170 cm (66.9")
70 cm (27.4")
70 c
m (2
7.4"
)
38 cm(13")
170 cm (66.9")
35 cm(13.8")
170 cm (66.9")
170 cm (66.9")
80 cm
(31.
50")
80 cm (31.50")
18
N2375-TUB
N2377-TUB
N2378-TUB
Acrylic & Fiber-Glass Bath Tubs
19
Square Shower Tray
Quadrant Shower Tray
Shower Drain
Item Number Description
N2372-S Square Shower Tray
Item Number Description
N2376-S Quadrant Shower Tray
Item Number Description
N2372-DR Shower Drain
Acrylic & Fiber-Glass Shower Trays
•Spring loaded opening for drain
•213 mm (8.375") x 80 mm (3.125")
•5-year warranty against any manufacturing related defects
213 mm (8.375")123 mm (4.9")
112 mm (4.4")
50 mm
(2")
40 mm
(1.6")
50 mm (2")
80 mm(3.125")
795 mm
(31.3")
695 mm
(27.4")
90 mm
(3.5")110 m
m (4.3")
795 mm (31.3")
695 mm (27.4")
140 mm
(5.5")
•800 mm (31.5") x 800 mm (31.5")
•Glass fiber reinforced plastic (Acrylic) – White Finish
•Non-slip grid pattern
•Fixture meets or exceeds the following: ANSI Z124.1.2
•5-year warranty against any manufacturing related defects
•795 mm (31.5") x 795 mm (31.5") x 110 mm (4.3"), Weight 8.6 kg (19 lbs)
•Glass fiber reinforced plastic (Acrylic) – White Finish (Available as Fiber-Glass)
•Non-slip grid pattern
•Fixture meets or exceeds the following: ANSI Z124.1.2
•5-year warranty against any manufacturing related defects
NEED NEW SPECDRAWiNG
C
800 mm (31.5")
800
mm
(31.
5")
60 mm (2.4")
60 m
m (2
.4")
R60 mm
(21.6")
20
Plumbing Accessories
Mixer Angle Valve
26-36 mm (1-1.5")
G 1/2G 1/2
54 mm (1.125")
• Intel shut-off stop
•Solid brass construction
•95 mm (3.75") x 56 mm (2.125"), Weight 0.2 kg (0.5 lbs)
•Threads: 13 mm (0.5") x 9.5 mm (.375")
•Flange escutcheon diameter: 56 mm (2.125")
•Meets or exceeds the following: ASME A112.18.1 / CSA B125.1 Chrome plating meets or exceeds the following: B368 (CASS)
•5-year warranty against any manufacturing related defects
Toilet & Shattaf Angle Valve• Intel shut-off stop
•Solid brass construction
•95 mm (3.75") x 56 mm (2.125"), Weight 0.2 kg (0.5 lbs)
•Threads: 13 mm (0.5") x 13 mm (0.5”)
•Flange escutcheon diameter: 54 mm (2.125")
• Inlet & outlet connections: G1/2 female threads
•Maximum operating pressure: 860 kPa (125 psi)
•Rated temperature: 5 to 71°C (40 to 160°F)
•Meets or exceeds the following: ASME A112.18.1 / CSA B125.1 Chrome plating meets or exceeds the following: B368 (CASS)
•SASo Certified
•5-year warranty against any manufacturing related defects
32 mm (1.25") P-Trap•Trap length 250 mm (9.875"), Weight 0.9 kg (2 lbs)
•Flange escutcheon diameter: 65 mm (2.5")
•outlet diameter: 32 mm (1.25")
•Solid brass construction (chrome plated)
•G1-1/4 female thread for inlet
•Maximum operating pressure: 860 kPa (125 psi)
•Rated temperature: 5 to 71°C (40 to 160°F)
•30-55 mm (1.9" - 1.2") adjustable inlet pipe
•Meets or exceeds the following: ASME A112.18.1 / CSA B125.1 Chrome plating meets or exceeds the following: B368 (CASS)
•SASo Certified
•5-year warranty against any manufacturing related defects
G 1/4
30-55 mm (1.125- 2.2")
65 mm (2.5")
250 mm (9.875")
35 mm(1.25")
70 mm Max.(2.75")
Item Number color
N2385 Chrome
Item Number color
N2384 Chrome
Item Number color
N2387 Chrome
10 mm (0.375")
56 mm
(2.25")
95 mm (3.75")
13 mm
(0.5")
21
Plumbing Accessories
Chrome Plated Copper Supply Tube
Item Number size
N2388-400 400 mm (15.75")
Special Order
N2389-300: 300 mm (11.75")
N2388-500 500 mm (19.75")
N2388-800 800 mm (31.5")
Bottle Trap
Item Number color
N2386 Chrome
•Trap length 250 mm (9.875"), weight 0.9 kg (2 lbs)
•Flange escutcheon diameter: 65 mm (2.5")
•outlet diameter: 32 mm (1.25")
•Solid brass construction (chrome plated)
•G1-1/4 female thread for inlet
•Maximum operating pressure: 860 kPa (125 psi)
•Rated temperature: 5 to 71°C (40 to 160°F)
•30-55 mm (1.25” to 2.2”) adjustable inlet pipe
•Meets or exceeds the following: ASME A112.18.1 / CSA B125.1 Chrome plating meets or exceeds the following: B368 (CASS)
•5-year warranty against any manufacturing related defects
Stainless Steel Flexible Hose
•Copper tube maintains flexibility to bend slightly for adjustments
•Tube length 400 mm (15.75"); Tube diameter: 10 mm (0.375")
•Threading: 13 mm (0.5")
•Also available by special order: 300 mm (11.75") Weight 0.1 kg (.25 lbs), 500 mm (19.75"), and 800 mm (31.5")
•Withstands burst pressure of 2000 kPa (290 psi)
•Meets or exceeds the following: ASME A112.18.1 / CSA B125.1 Chrome plating meets or exceeds the following: B368 (CASS)
•5-year warranty against any manufacturing related defects
•High quality EPDM inner tube with stainless steel braided cover
•Tube length 400 mm (15.75") Tube diameter: 13 mm (0.5")
•Threading: 13 mm (0.5")
•Also available by special order: 300 mm (11.75"), 500 mm (19.75"), and 800 mm (31.5")
•Withstands burst pressure of 2000 kPa (290 psi)
•Meets or exceeds the following: ASME A112.18.1 / CSA B125.1 Chrome plating meets or exceeds the following: B368 (CASS)
•5-year warranty against any manufacturing related defects
Item Number size
N2389-400 400 mm (15.75")
Special Order
N2389-300: 300 mm (11.75")
N2389-500 500 mm (19.75")
N2389-800 800 mm (31.5")
400 mm (15.75") 18 mm
(0.5")
10 mm
(0.4")
G 1/4
30-90mm (1.125- 3.5")
225-245mm (8.875 - 9.625")
15mm (0.5")
65mm(2.5")
35mm(1.25")
400 mm (15.75") 18 mm
(0.5")
10 mm
(0.4")
22
PLUMBING & water effIcIeNt ProdUcts
Designer Quality
Niagara Conservation combines the finest materials with unique designs in order to fulfill our customers’ Mixer demands. All faucets are coupled with our unique pressure compensated technology to enhance our sleek designs.
MIXERS
23
Shower Thermostatic Mixing Valve
Allow for the perfect water temperature by installing Niagara Conservation’s thermostatic mixing valve. This valve allows for the perfect water temperature while maintaining a safe shower environment for all users.
•Dual inlet design
• Valve is supplied with a diverter for shower or tub spout use
•Stainless steel mesh aerator outlet
•Quick response shut-off of hot supply when cold supply is lost
•Reliable wax-filled thermostat
•Temperature variation does not exceed ±2.0°C (±3.6°F)
• Shower mixing valve incorporates backflow prevention device
• Brass thermostatic cartridge and cap with replaceable corrosion resistant components
•Rated temperature: 5 to 71°C (40 to 160°F)
•5-year warranty against any manufacturing related defect
Item Number Description
N2383 Mixing Valve
N2383-TS Tub Spout
457mm (18")
216 mm (8.5")
19 mm (0.75") NPT 102 mm (4")
184 mm (7.25")
140mm(5.5")
44mm(0.75")
146mm(5.75")
OUTLETS 13mm (0.5")NPT
238 mm (9.375")REF
143 mm (5.625")REF
1931mm (74")REF
41-83 mm (1.625-3.25")
13 mm (0.5")NPT
1829 mm-2185 mm(72-84")
38mm (1.5")
51mm (2")
19mm (.75") NPT
*13mm (0.5") THREAD ENGAGEMENT
AssEmblED DImENsIoNsmixing Valve: 184 mm (7.25") x 184 mm (7.25")Tub spout: 216 mm (8.5") x 19 mm (0.75")
PlUmbINg DImENsIoNsG1/2 female inlet & outlet threads
mATERIAlsChrome plated escutcheon, handle & other exposed parts
sPEcIfIcATIoNsWithstands hydrostatic pressure if 3450 kPa (500 psi)
Rated temperature: 5 to 71°C (40 to 160°F)
cERTIfIcATIoN(s)Meets or exceeds the following: ASME A112.18.1 / CSA B125.1
Chrome plating meets or exceeds the following: B368 (CASS)
24
Bidet Faucet Mixer
This bidet mixer gives an elongated and crisp look to any bidet. With Niagara Conservation’s pressure compensated aerator this bidet mixer out-performs the competition under any pressure.
• Fitted with a Niagara Conservation 7.6 LPM (2.0 GPM) bubble spray pressure compensated aerator
•Faucet outlet has swivel action
•Single handle design
• Chrome-plated brass
• Incorporates backflow prevention device
• Supplied with a horizontal remote brass pop-up drain assembly with 55 mm (2.15625") brass pipe extension and linkage
• Includes (2) 350 mm (13.75") flexible stainless steel supply hoses
•SASo Certified
•5-year warranty against any manufacturing related defect
Item Number Description
N2380 Bidet Faucet Mixer
150 mm (5.9")32 mm(1.25")
62 mm(2.4")
110 mm(4.3")
140 mm(5.5")
45 mm(0.75")
5.3
6.0
6.8
7.6
8.3
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
70 140 210 275 345 410 480
7.6 LPM (2.0 GPM) Bubble Spray Aerator
AssEmblED DImENsIoNs100 mm (3.3125") x 140 mm (5.5") x 815 mm (32"); Base diameter 45 mm (1.75")
PlUmbINg DImENsIoNsDrain hole: 45 mm (1.75") diameter
Drain inlet flange: 62 mm (2.4") diameter
mATERIAlsbody: Solid brass construction (chrome plated)
Handle: Chrome plated zinc
sPEcIfIcATIoNsMaximum operating pressure: 860 kPa (125 psi)
Rated temperature: 5 to 71° C (40 to 160° F)
Withstands hydrostatic pressure of 3450 kPa (500 psi)
cERTIfIcATIoN(s)Meets or exceeds the following: ASME A112.18.1 / CSA B125.1
Chrome plating meets or exceeds the following: B368 (CASS)
25
Lavatory Faucet Mixer
• Fitted with Niagara Conservation 5.7 LPM (1.5 GPM) Needle Spray Pressure Compensated Aerator
•Single handle design
• Chrome-plated brass
• Incorporates backflow prevention device
• Supplied with a horizontal remote brass pop-up drain assembly with 95 mm (3.75") brass pipe extension and linkage
•Single hole
• Includes (2) 350 mm (13.75") flexible stainless steel supply hoses
•SASo Certified
•5-year warranty against any manufacturing related defect
Item Number Description
N2381 Lavatory Faucet Mixer
5.7 LPM (1.5 GPM) Needle Spray Aerator
704.0
4.5
5.0
5.5
6.0
140 210 275 345 410 480 550
Flo
w (
LP
M)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
Niagara Conservation’s new lavatory mixer brings a sophisticated and fashionable look to any basin. Made with the finest materials this mixer is one you can’t go wrong with.
NS
45 mm (1.75")
107 mm (4.2")
56 mm (2.2")
31 mm (1.2") MAX. 400 mm (15.75") FLEX HOSE
G 1/2
AssEmblED DImENsIoNs
130 mm (5.125") x 142 mm (5.5"); Base diameter 45 mm (1.75")
PlUmbINg DImENsIoNsDrain hole: 45 mm (1.75") diameter
Drain inlet flange diameter: 62 mm (2.4") diameter
mATERIAlsbody: Solid brass construction (chrome plated)
Handle: Chrome plated zinc
sPEcIfIcATIoNsMaximum operating pressure: 860 kPa (125 psi)
Rated temperature: 5 to 71° C (40 to 160° F)
Withstands hydrostatic pressure of 3450 kPa (500 psi)
cERTIfIcATIoN(s)Meets or exceeds the following: ASME A112.18.1 / CSA B125.1 / NSF-61
Chrome plated meets or exceeds the following: B368 (CASS)
26
Shower Faucet Mixer with Diverter
Niagara Conservation’s shower mixer finishes our bathroom mixer line with adding a sleek and modern feel. This shower mixer is great for any bathroom install.
• Fitted with Niagara Conservation 7.6 LPM (2.0 GPM) Bubble Spray Pressure Compensated Aerator
•Single handle design
• Dual inlet design
• Incorporates backflow prevention device
•Works well with any Niagara handheld showerhead
•SASo Certified
•5-year warranty against any manufacturing related defect
180
mm
(7")
13 m
m (0
.5")
17 mm(0.625")
28 mm(1.125")
138 mm(5.375")
Item Number Description
N2382 Shower Faucet Mixer
5.3
6.0
6.8
7.6
8.3
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
70 140 210 275 345 410 480
AssEmblED DImENsIoNs180 mm (7") x 166 mm (6.5"); Inlet diameter 13 mm (.5")
PlUmbINg DImENsIoNsInlet threads: G1/2 male threads (1/2" BSP)
mATERIAlsbody: Solid brass construction (chrome plated)
Handle: Chrome plated zinc
sPEcIfIcATIoNsMaximum operating pressure: 860 kPa (125 psi)
Rated temperature: 5 to 71° C (40 to 160° F)
Withstands hydrostatic pressure of 3450 kPa (500 psi)
cERTIfIcATIoN(s)Meets or exceeds the following: ASME A112.18.1 / CSA B125.1
Chrome plating meets or exceeds the following: B368 (CASS)
27
Wall Mounted Kitchen Mixer
Niagara’s New Wall Mount Mixer Unit brings a simplistic but fashionable look to all applications. Made with the finest materials and Niagara’s Pressure Compensator, this mixer combines performance and style.
• Fitted with Niagara Conservation 5.7 LPM (1.5 GPM) Dual-Spray Kitchen Aerator with pause valve
•Single handle design
•Chrome-plated brass
•5-year warranty against any manufacturing related defect
Item Number Description
N2391 Wall Mounted Kitchen Mixer
704.0
4.5
5.0
5.5
6.0
140 210 275 345 410 480 550
Flo
w (
LP
M)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
G 1/2
40mm(1.57") 210 mm
(8.27")
100 mm(3.94")
150 mm(5.90")
270 mm(10.63")
AssEmblED DImENsIoNs
130 mm (5.125") x 142 mm (5.5"); Base diameter 45 mm (1.75")
PlUmbINg DImENsIoNsDrain hole: 45 mm (1.75") diameter
Drain inlet flange diameter: 62 mm (2.4375") diameter
mATERIAlsbody: Solid brass construction (chrome plated)
Handle: Chrome plated zinc
sPEcIfIcATIoNsMaximum operating pressure: 860 kPa (125 psi)
Rated temperature: 5 to 71° C (40 to 160° F)
Withstands hydrostatic pressure of 3450 kPa (500 psi)
cERTIfIcATIoN(s)Fixture meets or exceeds the following: ASME A112.18.1 / CSA B125.1 / NSF-61
Chrome plated meets or exceeds the following: B368 (CASS)
28
Counter-Set Kitchen Mixer
Niagara’s new Counter-Set mixer brings a sophisticated and fashionable look to any basin.
• Fitted with Niagara Conservation 5.7 LPM (1.5 GPM) Dual-Spray Kitchen Aerator with pause valve
•Single handle design
•Chrome-plated brass
•Single hole
• Includes flexible supply hoses
•5-year warranty against any manufacturing related defect
Item Number Description
N2390 Counter-Set Kitchen Mixer
704.0
4.5
5.0
5.5
6.0
140 210 275 345 410 480 550
Flo
w (
LP
M)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
225 mm(8.9")
G 3/8
200 mm(7.9")
AssEmblED DImENsIoNs
130 mm (5.125") x 142 mm (5.5"); Base diameter 45 mm (1.75")
PlUmbINg DImENsIoNsDrain hole: 45 mm (1.75") diameter
Drain inlet flange diameter: 62 mm (2.4375") diameter
mATERIAlsbody: Solid brass construction (chrome plated)
Handle: Chrome plated zinc
sPEcIfIcATIoNsMaximum operating pressure: 860 kPa (125 psi)
Rated temperature: 5 to 71° C (40 to 160° F)
Withstands hydrostatic pressure of 3450 kPa (500 psi)
cERTIfIcATIoN(s)Meets or exceeds the following: ASME A112.18.1 / CSA B125.1 / NSF-61
Chrome plated meets or exceeds the following: B368 (CASS)
PLUMBING & water effIcIeNt ProdUcts
Savings Without Sacrificing PerformanceNiagara showerheads are the ultimate high-efficient showerhead and aerators. Unique designs coupled with pressure compensator technology allows for a more enjoyable shower. Enjoy a shower longer without the guilt of wasting as much water as a traditional showerhead.
SHoWERHEADS
At low pressure, water is allowed to flow through the (3) holes in the center of the compensator along with around the scallop cutout.
As the water pressure increases, the force begins to press down on the compensator, causing it to flex. As it flexes the scallop cuts on the edge are sealed off, allowing water only to flow through the center holes. As the compensator flexes further, due to the increased pressure, the shape of the holes begins to distort, reducing the size of the openings. This further controls the amount of water that can flow through them. The shape of the part and the hardness of the rubber help maintain the level flow rate as the pressure increases.
Pressure Compensating DesignNiagara’s patented pressure compensator is built into each of our showerheads and aerators to maintains a constant flow regardless of water pressure by regulating the amount of water that flow at higher pressures.
LOW WATER PRESSURE
HiGH WATER PRESSURE
29
APPlIcATIoNPotable Water
AssEmblY DETAIlsoverall dimension: 105 mm (4.125") x 68 mm (2.7") Consists of showerhead body and all internal parts necessary for operation
mATERIAlsbody: Chrome plated ABS plastic or white color durable ABS plastic
Internal Parts: Chrome plated brass ball joint, ABS plastic & high heat rubber gaskets and pressure compensator
PAckAgINgPacked 50 parts per carton
THREADsInlet size: ½-14 NPSM female straight pipe thread
cERTIfIcATIoN(s)
Meets or exceeds: ASME A112.18.1 / CSA B125.1
Chrome plated parts meet performance requirements for corrosion testing per standard ASTM B368
WaterSense certified
68 mm (2.7")105 mm (4.125")
1/2 NPSM
68 mm (2.7")105 mm (4.125")
1/2 NPSM
30
Earth® Fixed Mount Showerheads
Item Number color / flow Rate
N2912 White 4.7 LPM (1.25 GPM)N2912CH Chrome 4.7 LPM (1.25 GPM)N2915N White 5.7 LPM (1.5 GPM)N2915CH Chrome 5.7 LPM (1.5 GPM)N2915-V White 5.7 LPM (1.5 GPM)
with Soap & Soak® valveN2917 White 6.6 LPM (1.75 GPM)N2917CH Chrome 6.6 LPM (1.75 GPM)N2920 White 7.6 LPM (2.0 GPM)N2920CH Chrome 7.6 LPM (2.0 GPM)N2920CH-TP Chrome Tamperproof
7.6 LPM (2.0 GPM)N2920-V White 7.6 LPM (2.0 GPM)
with Soap & Soak® valve
While the Earth® Showerhead ensures drastic water usage reductions, our patented pressure compensating technology still guarantees a powerful, consistent shower regardless of available water pressure. The showerhead features a 9-jet adjustable turbo massage that easily rotates from a gentle needle spray to a forceful jet. As the stream of water is non-aerated, the showerhead experiences less temperature loss — translating to maximum energy savings. offered in white or chrome plated finish, the corrosion-resistant, high-impact ABS thermoplastic body meets or exceeds ANSI specifications and is guaranteed for 5-years.
•Niagara’s patented non-removable pressure compensator provides a constant output of water regardless of pressure
•Three spray settings: 9-jet power spray, shower and combination
•Symmetrical conical pattern water flow with large spray diameter
•Non-aerated spray means less temperature loss with maximum energy saving
•Large PoM swivel adjustment
•Easy installation without tools
•Corrosion-resistant, high-impact ABS thermoplastic body is maintenance-free
•SASo certified
•5-year warranty against manufacturing defects
3 SPRAY SETTiNGS
31
APPlIcATIoNPotable Water
AssEmblY DETAIlsoverall dimension: 105 mm (4.125") x 220 mm (8.7")
Consists of showerhead body and all internal parts necessary for operation
mATERIAlsbody: Chrome plated ABS plastic or white color durable ABS plastic
bracket ball Joint: White color durable ABS plastic or chrome plated ABS thermoplastic
Internal Parts: Chrome plated brass, ABS and POM plastics & high heat rubber gaskets and pressure compensator
Hose: 183.9 cm (72") nylon reinforced PVC hose with durable chrome-plated or white color BS connectors
PAckAgINgIndividually bagged showerhead assemblies, packed 12 parts per carton
cERTIfIcATIoN(s)Meets or exceeds: ASME A112.18.1 / CSA B125.1
WaterSense certified
Earth® Handheld Showerhead
Item Number color / flow Rate
N2935-ME White 7.6 LPM (2.0 GPM)
N2935CH-ME Chrome 7.6 LPM (2.0 GPM)
N2945CH-ME Chrome 5.7 LPM (1.5 GPM)
1/2 NPSM
68 mm (2.7")84 mm (3.3")
220 mm (8.6")
54 mm (2.125")
64 mm (2.5")
38 mm (1.5")
•Niagara’s patented non-removable pressure compensator provides a constant output of water regardless of pressure
•Three spray settings: 9-jet power spray, shower and combination
• Includes 183.9 cm (72 inch) tangle-free, high-quality stainless steel hose and mounting bracket
•Symmetrical conical pattern water flow with large spray diameter
•Corrosion-resistant, high-impact ABS thermoplastic body is maintenance-free
• A non-aerated spray means less temperature loss with maximum energy savings
•SASo certified
•5-year warranty against any manufacturing defects
3 SPRAY SETTiNGS
While the Earth® Showerhead ensures drastic water usage reductions, our patented pressure compensating technology still guarantees a powerful, consistent shower regardless of available water pressure. The showerhead features a 9-jet adjustable turbo massage that easily rotates from a gentle needle spray to a forceful jet. As the stream of water is non-aerated, the showerhead experiences less temperature loss — translating to maximum energy savings. offered in white or chrome plated finish, the corrosion-resistant, high-impact ABS thermoplastic body meets or exceeds ANSI specifications and is guaranteed for 5-years.
32
APPlIcATIoNPotable Water
AssEmblY DETAIlsoverall dimensions: 113 x 80 mm (4.4" x 3.1") Consists of showerhead body and all internal parts necessary for operation
mATERIAlsbody: Chrome plated ABS plastic or white color durable ABS plastic
Internal Parts: Chrome plated brass ball joint, ABS plastic & high heat rubber gaskets and pressure compensator
PAckAgINgIndividually bagged showerhead assemblies, packed 50 parts per carton
cERTIfIcATIoN(s)Meets or exceeds: ASME A112.18.1 / CSA B125.1
WaterSense certified
Sava Spa Showerhead
The look of luxury and performance with the benefits of saving. The Sava Spa showerhead has an oversized spray head for extra wide coverage and the patented pressure compensator ensures a consistent flow for the duration of your shower.
• Available in 5.7 LPM (1.5 GPM) and 6.6 LPM (1.75 GPM)
• Niagara patented non-removable pressure compensator provides a constant output of water regardless of pressure
• Extra large spray head, 113 mm (4.4") diameter
• Rubber spray nozzles for easy cleaning
• 360° ball joint swivel for adjustment
• Corrosion resistant high-impact ABS thermoplastic body
•SASo certified
•5-year warranty against manufacturing defects
Item Number color / flow Rate
N2515 White 5.7 LPM (1.5 GPM)
N2515CH Chrome 5.7 LPM (1.5 GPM)
N2517 White 6.6 LPM (1.75 GPM)
N2517CH Chrome 6.6 LPM (1.75 GPM)
13 mm(1/2"-14) NPSM
80 mm (3.1")113 mm (4.4")
13 mm(1/2"-14) NPSM
80 mm (3.1")113 mm (4.4")
360° SWiVELOVERSiZED SPRAY HEAD
33
APPlIcATIoNPotable Water
AssEmblY DETAIlsoverall dimensions: 54 x 97 mm (2.125" x 3.75" diameter) Consists of showerhead body and all internal parts necessary for operation
mATERIAlsbody: Chrome plated zinc with chrome plated brass ball joint Internal Parts: ABS and POM plastic & high heat rubber gaskets
PAckAgINgIndividually bagged showerhead assemblies, packed 100 parts per carton
THREADsInlet size: ½-14 NPSM female straight pipe thread
cERTIfIcATIoN(s)Meets or exceeds: ASME A112.18.1 / CSA B125.1
Chrome plated parts meet performance requirements for corrosion testing per standard ASTM B368
WaterSense certified
Luxury Spa Showerhead
The look of luxury with the benefits of saving. This 100% chrome plated zinc body will stand up to any tough location. The patented pressure compensating technology guarantees a feeling of great force while using less water!
•Niagara’s patented pressure compensator provides a constant output of water regardless of pressure
• Single spray function
•Wide spray coverage
• Adjustable angle
•Available with tamper-proof option
•SASo certified
•5-year warranty against manufacturing defects
Item Number color / flow Rate
N2150 Chrome 5.7 LPM (1.5 GPM)
N2150-TP Chrome 5.7 LPM (1.5 GPM) Tamperproof
57 mm (2.125")
97 mm (3.75")
13 mm (0.5") NPSM
ADJUSTABLE ANGLE
WiDE SPRAY COVERAGE
34
Bi-Max Showerhead
Conservation with a twist! Bi-Max is a unique, two-flow rate showerhead, allowing you to match your flow rate to your shower task while saving more while you shower.
• Two pressure compensated flow rate options: 3.8 and 5.7 LPM (1.0 and 1.5 GPM)
• Niagara’s patented non-removable pressure compensator provides a constant output of water regardless of pressure
• Easy grip turn-dial for selecting flow rate
• Even, needle spray with a large spray diameter
• Compact, modern design
•Large PoM swivel adjustment, virtually lead free
• 5-year warranty against any manufacturing related defects
Item Number color / flow Rate
N2610 White 3.8/5.7 LPM (1.0/1.5 GPM)
N2610CH Chrome 3.8/5.7 LPM (1.0/1.5 GPM)
APPlIcATIoNPotable Water
AssEmblY DETAIlsoverall dimensions: 54 x 97mm (2.125" x 3.75" diameter) Consists of showerhead body and all internal parts necessary for operation
mATERIAlsbody: Chrome plated ABS plastic or white color durable ABS plastic
Internal Parts: ABS and POM plastic & high heat rubber gaskets
PAckAgINgPacked 100 parts per carton
THREADsInlet size: ½-14 NPSM female straight pipe thread
cERTIfIcATIoN(s)Meets or exceeds: ASME A112.18.1 / CSA B125.1
WaterSense certified
54 mm (2.125")
97 mm (3.8")
13 mm (1/2") NPSM
TWO FLOW RATES
LARGE POM SWiVEL ADJUSTMENT
35
Tri-Max™ Showerhead
Conservation with a twist! Tri-Max™ is a unique, three-flow rate showerhead, allowing you to match your flow rate to your task and save more while you shower.
• Three pressure compensated flow rate options 1.8, 3.8 and 5.7 LPM (0.5, 1.0 and 1.5 GPM)
• Niagara’s patented non-removable pressure compensator provides a constant output of water regardless of pressure
• Easy grip turn-dial for selecting flow rate
•Even, vacillating motion with a large spray diameter
• Compact, modern design
• Corrosion resistant high-impact ABS thermoplastic body
•Large PoM swivel adjustment, virtually lead free
• Water flow from showerhead is a pulsating, oscillation motion with large spray diameter
•Large swivel adjustment/rotation for head
•SASo certified
•5-year warranty against manufacturing defects
Item Number color / flow Rate
N2615 White 1.8/3.8/5.7 LPM (0.5/1.0/1.5 GPM)
N2615CH Chrome 1.8/3.8/5.7 LPM (0.5/1.0/1.5 GPM)
APPlIcATIoNPotable Water
AssEmblY DETAIlsoverall dimensions: 54 x 97 mm (2.125" x 3.75" diameter) Consists of showerhead body and all internal parts necessary for operation
mATERIAlsbody: Chrome plated ABS plastic or white color durable ABS plastic
Internal Parts: ABS and POM plastic & high heat rubber gaskets
PAckAgINgPacked 100 parts per carton
THREADsInlet size: ½-14 NPSM female straight pipe thread
cERTIfIcATIoN(s)Meets or exceeds: ASME A112.18.1 / CSA B125.1
Chrome plated parts meet performance requirements for corrosion testing per standard ASTM B368
WaterSense certified
97 mm (3.8")54 mm (2.125")
13 mm (1/2") NPSM
97 mm (3.8")54 mm (2.125")
13 mm (1/2") NPSM
THREE FLOW RATES
LARGE POM SWiVEL ADJUSTMENT
36
Vara Spa™ 5-Function Fixed Mount Showerhead
•5 Spray Patterns:
Full
Pulse
Center
Full+Pulse
Full+Center
• Niagara’s patented non-removable pressure compensator provides a constant output of water regardless of pressure
•Rubberized easy-clean nozzles
•Turns freely when connected
•5-year warranty against manufacturing defects
Item Number color / flow Rate
N9620CH Chrome 7.6 LPM (2.0 GPM)
APPlIcATIoNPotable Water
AssEmblED DImENsIoNsshowerhead: 103 mm (4") x 98 mm (3.9") diameter
PlUmbINg DImENsIoNsInlet threads – G1/2 threads
mATERIAlsbody: Chrome plated durable ABS plastic construction
Internal Parts: Chrome plated brass ball joint, ABS plastic & high heat rubber gaskets and pressure compensator
PAckAgINgPacked 40 parts per carton
cERTIfIcATIoN(s)Meets or exceeds: ASME A112.18.1 / CSA B125.1 Chrome plating meets or exceeds the following standard: B368 (CASS)
The luxury and performance of 5 unique spray settings with the benefits of saving water and reduced utility bills. Water savings of 20% adds up to 5,500 gallons of water saved per year. The Vara Spa™ has a consistent water flow and a lifetime warranty. You get savings without sacrificing performance.
98 mm (3.9")
103 mm (4")
98 mm (3.9")
5 SPRAY PATTERNS
37
Vara Spa™ 5-Function Handheld Showerhead
•5 Spray Patterns:
Full
Pulse
Center
Full+Pulse
Full+Center
• Niagara’s patented non-removable pressure compensator provides a constant output of water regardless of pressure
• Rubberized easy-clean nozzles
• Wall-mounted bracket included
•152 cm (60") length, clear PVC tube, stainless steel wrapped
•Chrome plated brass connectors
•Turns freely when connected
•5-year warranty against manufacturing defects
Item Number color / flow Rate
N9620CH-HH Chrome 7.6 LPM (2.0 GPM)
APPlIcATIoNPotable Water
AssEmblED DImENsIoNsShowerhead: 265 mm (10.4") x 98 mm (3.9") diameter Hose: 152 cm (60")
PlUmbINg DImENsIoNsInlet threads – G1/2 threads
mATERIAlsbody: Chrome plated durable ABS plastic construction Hose: Stainless steel wrapped PVC and connectors are G1/2 male thread connectors: Chrome plated brass
PAckAgINgIndividually bagged showerhead assemblies, packed 12 parts per carton
cERTIfIcATIoN(s)
Meets or exceeds: ASME A112.18.1 / CSA B125.1 Chrome plating meets or exceeds the following standard: B368 (CASS)
The luxury and performance of 5 unique spray settings with the benefits of saving water and reduced utility bills. Water savings of 20% adds up to 5,500 gallons of water saved per year. The Vara Spa™ has a consistent water flow and a lifetime warranty. You get savings without sacrificing performance. The Vara Spa™ Handheld comes with a 152 cm (60") hose and support brackets.
98 mm (3.9")
265 mm (10.4")
5 SPRAY PATTERNS
38
Niagara understands that multiple users take showers. This is why we combined our newest five function showerhead and gave you both the fixed mount and handheld all in one. This patented device make sure you have the best experience at all times. The luxury and performance of 5 unique spray settings with the benefits of saving water and reduced utility bills. Water savings of 20% adds up to 5,500 gallons of water saved per year. Savings without sacrificing performance.
•5 Spray Patterns:
Full
Pulse
Center
Full+Pulse
Full+Center
• Rubberized easy-clean nozzles
• Wall-mounted bracket included
•152 cm (60") length, clear PVC tube, stainless steel wrapped
•Chrome plated brass connectors
•Turns freely when connected
•Easily changes from handheld to fixed mount or use both
•5-year warranty against manufacturing defects
Item Number color / flow Rate
N9720CH-HH Chrome 7.6 LPM (2.0 GPM)
APPlIcATIoN
Potable Water
AssEmblED DImENsIoNs
showerhead: 265 mm (10.4") x 98 mm (8.6") Hose: 152 cm (60")
PlUmbINg DImENsIoNsInlet threads – G1/2 threads
mATERIAls
body & Diverter: Chrome plated durable ABS plastic construction Hose: Stainless steel wrapped PVC
PAckAgINgIndividually bagged showerhead assemblies, packed 12 parts per carton
cERTIfIcATIoN(s)Meets or exceeds: ASME A112.18.1 / CSA B125.1 Chrome plating meets or exceeds the following standard: B368 (CASS)
Vara Spa™ 5-Function Handheld & Fixed Mount Combo Showerhead
98 mm (3.9")
103 mm (4")
98 mm (3.9")
98 mm (3.9")
103 mm (4")
98 mm (3.9")
98 mm (3.9")
265 mm (10.4")
5 SPRAY PATTERNS
39
Euro-Style 5-Function Handheld Showerhead
• Rainfall style five (5)-function hand-held shower functions include: Rain Massage (Focus) Mist Rain/Focus Combo Rain/Mist Combo
• Niagara’s patented non-removable pressure compensator provides a constant output of water regardless of pressure
• Flat/slim-line body & face. Head flows into the handle, with little protrusion
•183.9 cm (72") length, clear PVC tube, stainless steel wrapped
• Rubberized easy-clean nozzles
• Wall-mounted bracket included
•Wide spray pattern
•Turns freely when connected
APPlIcATIoNPotable Water
AssEmblED DImENsIoNsshowerhead: 235 mm (9.25") x 102 mm (4") Hose: 182.9 cm (72")
PlUmbINg DImENsIoNsInlet threads – G1/2 threads
mATERIAlsbody: Chrome plated durable ABS plastic construction
Hose: Stainless steel wrapped PVC
Chrome plated brass connectors
Hose connectors are G1/2 male thread
PAckAgINgIndividually bagged showerhead assemblies, packed 12 parts per carton
cERTIfIcATIoN(s)Meets or exceeds: ASME A112.18.1 / CSA B125 / BS EN 1112 / BS EN 1113 / WRAS
Chrome plating meets or exceeds the following standard: B368 (CASS)
183.9 cm (72")
13 mm (0.5")
235
mm
(9.2
5")
102 mm (4")
54 mm (2.125")
64 mm (2.5")
38 mm(1.5")
5 SPRAY PATTERNS
Item Number color / flow Rate
N2570CH Chrome 7.6 LPM (2.0 GPM)
This rainfall style showerhead with five unique settings, offers a luxurious experience while still reducing water usage by 20%. An efficient water flow reduces energy consumption needed to heat the water, so hot water lasts longer.
24mm (0.9") 13mm 1/2"-14 NPSMFemale Thread
24mm (0.9")13mm 1/2"-14 NPSMMale Thread
24mm (0.9") 13mm 1/2"-14 NPSMFemale Thread
24mm (0.9")13mm 1/2"-14 NPSMMale Thread
40
Showerhead Accessories
Showerhead Flow Control• Intel shut-off stop
•Solid brass construction
•95 mm (3.75") x 56 mm (2.125"), Weight 0.2 kg (0.5 lbs)
•Threads: 13 mm (0.5") x 13 mm (0.5")
•Flange escutcheon diameter: 56 mm (2.2")
•Meets or exceeds the following: ASME A112.18.1 / CSA B125.1
•Chrome plating meets or exceeds the following: B368 (CASS)
•SASo certified
•5-year warranty against any manufacturing related defect
Soap & Soak® Showerhead Flow Control on/off Valve
•Compatible with conventional showerheads
•Patented Soap & Soak® valve reduces flow to approximately 3.8 LPM (1.0 GPM) for maximum water savings
• Inlet size: 1/2 -14 NPSM female straight pipe thread
•5-year warranty against any manufacturing related defect
Shower Arm with Escutcheon Plate
Item Number flow Rate
N3110 3.8 LPM (1.0 GPM)
Item Number flow Rate
N3320 7.6 LPM (2.0 GPM)
N3322 8.5 LPM (2.2 GPM)
N3325 9.5 LPM (2.5 GPM
Item Number color
N3162 Chrome
•overall Length: 152 mm (6")
•Solid Brass construction with chrome plating
•1/2-14 NPT male thread for inlet and outlet
•57 mm (2.25") minimum diameter sliding escutcheon plate with 4 inner tabs for fit against shower arm
•Maximum operating pressure: 860 kPa (125 psi)
•Rated temperature: 5 to 71°C (40 to 160°F)
•Meets or exceeds the following: ASME A112.18.1 / CSA B125.1
•Chrome plating meets or exceeds the following: B368 (CASS)
152 mm (6")
13 mm 1/2"-14 NPT
57 mm (2.25")
Earth® Fixed Mount Showerhead Series
FINISHES
White Chrome Tamperproof Soak and Soap®
FLOW RATESN2912 White
N2912CH Chrome
4.7 LPM/ 1.25 GPM
• 4.7 LPM (1.25 GPM) maximum flow at pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 3.8 LPM (1.0 GPM) at 70 kPa (10psi) and maintains constant flow of 4.7 LPM (1.25 GPM) from 210 to 550 kPa (30 to 80 psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
N2915 White
N2915CH Chrome
N2915-V White
5.7 LPM/ 1.5 GPM
• 5.7 LPM (1.5 GPM) maximum flow at pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 4.2 LPM (1.0 GPM) at 70 kPa (10psi) and maintains constant flow of 5.7 LPM (1.5 GPM) from 210 to 550 kPa (30 to 80 psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
N2917 White
N2917CH Chrome
6.6 LPM/ 1.75 GPM
• 6.6 LPM (1.75 GPM) maximum flow of pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 4.2 LPM (1.1 GPM) at 70 kPa (10psi) and maintains constant flow of 6.6 LPM (1.75 GPM) from 210 to 550 kPa (30 to 80 psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
7.6 LPM/ 2.0 GPM
N2920 White
N2920CH Chrome
N2920CH-TP Chrome
N2920-V White
• 7.6 LPM (2.0 GPM) maximum flow at pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 4.5 LPM (1.2 GPM) at 70 kPa (10psi) and maintains constant flow of 7.6 LPM (2.0 GPM) from 210 to 550 kPa (30 to 80 psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
0.0
1.5
3.0
4.5
6.0
6.8
70 140 210 275 345 410 480 550
Flow
(LP
M)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
5.3
6.0
6.8
7.6
8.3
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
70 140 210 275 345 410 480
700.0
1.5
3.0
4.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
Showerhead Flow Rates & Finishes
704.0
4.5
5.0
5.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
41
5.3
6.0
6.8
7.6
8.3
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
70 140 210 275 345 410 480
Luxury Spa Showerhead
FINISHES
Chrome Tamperproof
FLOW RATES
N2150 Chrome
N2150-TP Chrome
5.7 LPM/ 1.5 GPM
• 5.7 LPM (1.5 GPM) maximum flow at pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 4.2 LPM (1.1 GPM) at 70 kPa (10psi) and maintains constant flow of 5.7 LPM (1.5 GPM) from 210 to 550 kPa (30 to 80 psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
Showerhead Flow Rates & Finishes
704.0
4.5
5.0
5.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
704.0
4.5
5.0
5.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
Earth® Handheld Showerhead Series
FINISHES
White Chrome
FLOW RATES
N2945CH-ME Chrome
5.7 LPM/ 1.5 GPM
• 5.7 LPM (1.5 GPM) maximum flow at pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 4.2 LPM (1.1 GPM) at 70 kPa (10psi) and maintains constant flow of 5.7 LPM (1.5 GPM) from 210 to 550 kPa (30 to 80 psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
N2935-ME White
N2935CH-ME Chrome
7.6 LPM/ 2.0 GPM
• 7.6 LPM (2.0 GPM) maximum flow at pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 4.5 LPM (1.2 GPM) at 70 kPa (10psi) and maintains constant flow of 7.6 LPM (2.0 GPM) from 210 to 550 kPa (30 to 80 psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
42
Sava Spa Showerhead
FINISHES
White Chrome
FLOW RATESN2515 White
N2515CH Chrome
5.7 LPM/ 1.5 GPM
• 5.7 LPM (1.5 GPM) maximum flow at pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 4.2 LPM (1.1 GPM) at 70 kPa (10 psi) and maintains constant flow of 5.7 LPM (1.5 GPM) from 210 to 550 kPa (30 to 80psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
N2517 White
N2517CH Chrome
6.6 LPM/ 1.75 GPM
• 6.6 LPM (1.75 GPM) maximum flow of pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 4.2 LPM (1.1 GPM) at 70 kPa (10 psi) and maintains constant flow of 6.6 LPM (1.75 GPM) from 210 to 550 kPa (30 to 80 psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
Bi-Max Showerhead
FINISHES
White Chrome
FLOW RATESN2610 White
N2610CH Chrome
3.8 LPM/ 1.0 GPM;
5.7 LPM/ 1.5 GPM
• 5.7 LPM (1.5 GPM) maximum flow at pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 4.2 LPM (1.1 GPM) at 70 kPa (10 psi) and maintains constant flow of 5.7 LPM (1.5 GPM) from 210 to 550 kPa (30 to 80 psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
702.3
3.0
3.8
4.5
5.3
6.1
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
5.7 Pressure Compensated Spray
Non-PressureCompensated Spray
3.8 Pressure Compensated Spray
0.0
1.5
3.0
4.5
6.0
6.8
70 140 210 275 345 410 480 550
Flo
w (
LP
M)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
Showerhead Flow Rates & Finishes
704.0
4.5
5.0
5.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
43
Tri-Max™ Showerhead
FINISHES
White Chrome
FLOW RATES
N2615 White
N2615CH Chrome
1.9 LPM/ 1.0 GPM
3.8 LPM/ 1.0 GPM;
5.7 LPM/ 1.5 GPM
• 0.5 setting delivers a minimum flow of 1.1 LPM (0.3 GPM) at 70 kPa (10 psi) and maintains constant flow of 1.9 LPM (0.5 GPM) from 210 to 550 kPa (30 to 80 psi)
• 1.0 setting delivers a minimum flow of 2.7 LPM (0.7 GPM) at 70 kPa (10 psi) and maintains constant flow of 3.8 LPM (1.0 GPM) from 210 to 550 kPa (30 to 80 psi)
• 1.5 setting delivers a minimum flow of 3.4 LPM (0.9 GPM) at 70 kPa (10 psi) and maintains constant flow of 5.7 LPM (1.5 GPM) from 210 to 550 kPa (30 to 80 psi)
5-Function Showerheads
FINISHES
Euro-StyleVara Spa™
Fixed MountVara Spa™ Handheld
Vara Spa™ Combo
FLOW RATES
N2570CH Chrome
N9620CH Chrome
N9620CH-HH Chrome
N9670CH-HH Chrome
7.6 LPM/ 2.0 GPM
• 7.6 LPM (2.0 GPM) maximum flow at pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 4.5 LPM (1.2 GPM) at 70 kPa (10 psi) and maintains constant flow of 7.6 LPM (2.0 GPM) from 210 to 550 kPa (30 to 80 psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
0.0
0.8
1.5
2.3
3.0
3.8
4.5
5.3
6.0
70 140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
5.7 Pressure Compensated Spray
Non-PressureCompensated Spray
3.8 Pressure Compensated Spray
1.9 Pressure Compensated Spray
5.3
6.0
6.8
7.6
8.3
Flow
(LP
M)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
70 140 210 275 345 410 480
44
Showerhead Flow Rates & Finishes
Flow Control Valves
FINISHES
ChromeSoap & Soak®
Chrome
FLOW RATESN3110 Chrome
3.8 LPM/ 1.0 GPM
N3320 Chrome
7.6 LPM/ 2.0 GPM
• 7.6 LPM (2.0 GPM) maximum flow at pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 4.5 LPM (1.2 GPM) at 70 kPa (10 psi) and maintains constant flow of 7.6 LPM (2.0 GPM) from 210 to 550 kPa (30 to 80 psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
N3322Chrome
8.5 LPM/ 2.2 GPM
• 5.7 LPM (1.5 GPM) maximum flow at pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 4.2 LPM (1.0 GPM) at 70 kPa (10 psi) and maintains constant flow of 5.7 LPM (1.5 GPM) from 210 to 550 kPa (30 to 80 psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
N3325 Chrome
9.5 LPM/ 2.5 GPM
• 7.6 LPM (2.0 GPM) maximum flow at pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 4.5 LPM (1.2 GPM) at 70 kPa (10 psi) and maintains constant flow of 7.6 LPM (2.0 GPM) from 210 to 550 kPa (30 to 80 psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
5.3
6.0
6.8
7.6
8.3
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
70 140 210 275 345 410 480
4.0
5.0
6.0
7.0
9.0
10.0
8.0
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
70 140 210 275 345 410 480
4.0
5.0
6.0
7.0
9.0
8.0
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
70 140 210 275 345 410 480
• 3.8 LPM (1.0 GPM) maximum flow at pressure of 366 kPa (54 psi)
• Pressure compensator delivers a minimum flow 2.8 LPM (0.66 GPM) at 46 kPa (6.6 psi) and maintains constant flow of 3.8 LPM (1.0 GPM) from 140 to 366 kPa (60 to 160 psi)
• Maintains rated supply pressure of 460 kPa (66 psi)
700.0
1.5
3.0
4.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
45
Showerhead Flow Rates & Finishes
PLUMBING & water effIcIeNt ProdUcts
Aerators Cut Consumption, Not PerformanceKitchen and bathroom aerators represent a significant portion of your home’s water consumption. A simple device, Niagara’s efficient aerators cut water usage and reduce your water and energy bills. Niagara’s patented pressure compensating technology revolutionizes the flow of water and saves thousands of gallons of water a year without sacrificing pressure or performance.
Niagara’s High-Efficiency aerators introduce groundbreaking design allowing up to 3 flow rates and adjustable spray functions. Innovative pressure-compensating technology provides constant water output regardless of water pressure.
AERAToRS
46
47
Bathroom Sink Aerator
• Aerator provides a splash-free, aerated stream
• Niagara’s patented non-removable pressure compensator provides a constant output of water regardless of pressure
• Conical shape compensator helps to filter debris and mineral build-up
• Dual-thread brass connection, Male: 15/16-27 Female: 55/64-27
• Housing constructed of solid. low-lead brass with high-polished chrome finish
• Needle spray has (18) individual streams with the perfect amount of pressure
• Bubble spray model is air-inducted providing a full stream of water while using less
•SASo certified
•5-year warranty against any manufacturing related defect
Item Number flow Rate / Description
N3205N-PC 1.9 LPM (0.5 GPM) Needle
N3210N-PC 3.8 LPM (1.0 GPM) Needle
N3210B-PC 3.8 LPM (1.0 GPM) Bubble
N3215N-PC 5.7 LPM (1.5 GPM) Needle
N3104-PC 5.7 LPM (1.5 GPM) Bubble
APPlIcATIoNPotable Water
AssEmblY DETAIlsConsists of showerhead body and all internal parts necessary for operation
mATERIAlsbody: High polished chrome plated brass Internal Parts: Acetal (POM), high heat rubber gaskets & flow compensator
PAckAgINgPacked 500 parts per carton
THREADsInlet Dual Thread Design 15/16"-27 male thread / 55/64"-27 female thread
cERTIfIcATIoN(s)Meets or exceeds: ASME A112.18.1 / B125.1, ANSI/NSF 61
Chrome plated parts meet performance requirements for corrosion testing per standard ASTM B368
WaterSense certified
20 mm (0.8")24 mm (0.9")
25 mm (1") 20 mm (0.8")
NEEDLE SPRAY MODEL
BUBBLE SPRAY MODEL
48
28 mm (1.1")28 mm (1.1")
15 mm (0.6")
28mm (1.1")
28mm (1.1") 17mm (0.7")
Male & Female Tamperproof Aerators
•Tamperproof body to be only accessible with special key
• Niagara’s patented non-removable pressure compensator provides a constant output of water regardless of pressure
• Conical shape compensator helps to filter debris and mineral build-up
• Needle spray has (18) individual streams with the perfect amount of pressure
• Bubble spray model is air-inducted providing a full stream of water while using less
•Water flow is a symmetrical, conical pattern
•SASo certified
•5-year warranty against any manufacturing related defect
male Item Number flow Rate / Description
N3205NMTP-PC-T 1.9 LPM (0.5 GPM) Needle
N3210NMTP-PC-T 3.8 LPM (1.0 GPM) Needle
N3210BMTP-PC-T 3.8 LPM (1.0 GPM) Bubble
N3215NMTP-PC-T 5.7 LPM (1.5 GPM) Needle
N3215BMTP-PC-T 5.7 LPM (1.5 GPM) Bubble
female Item Number flow Rate / Description
N3205NFTP-PC-T 1.9 LPM (0.5 GPM) Needle
N3210NFTP-PC-T 3.8 LPM (1.0 GPM) Needle
N3210BFTP-PC-T 3.8 LPM (1.0 GPM) Bubble
N3215NFTP-PC-T 5.7 LPM (1.5 GPM) Needle
N3215BFTP-PC-T 5.7 LPM (1.5 GPM) Bubble
APPlIcATIoNPotable Water
AssEmblY DETAIlsConsists of aerator body and all internal parts necessary for operation, tamperproof key for installation
mATERIAlsbody: High polished chrome plated brass Internal Parts: Acetal (POM), high heat rubber gaskets & flow compensator
PAckAgINgAerator assemblies, packed 6 parts per tube, packed 504 parts per carton, 5 tamperproof keys per carton
THREADsInlet size: 15/16"-27 male thread
Inlet size: 55/64”-27 female thread
cERTIfIcATIoN(s)Meets or exceeds: ASME A112.18.1 / B125.1, ANSI/NSF 61
Chrome plated parts meet performance requirements for corrosion testing per standard ASTM B368
WaterSense certified
TAMPERPROOF KEY iNCLUDED
NEEDLE SPRAYBUBBLE SPRAY MODEL
MALE THREAD FEMALE THREAD
MALE THREAD
FEMALE THREAD
49
Lead-Free Aerator
The lead-free aerator brings a new and affordable way to further the safety of your tap water. Constructed entirely of ABS polyethylene, there is no brass material used in the construction—including the threading. This aerator is an ideal LEAD FREE solution for the safety of the household.
• Aerator provides a splash-free, aerated stream
•Niagara’s patented non-removable pressure compensator provides a constant output of water regardless of pressure
•Modern design fits most faucets
• Aerator body is constructed entirely of ABS poly, completely lead-free for safe drinking water
• Patent-pending dual-threaded connection (Male: 15/16-27 Female: 55/65-27) has no visible threads. The non-stripping PoM threading component comes with special install key
• Needle spray has (18) individual streams with the perfect amount of pressure
• Bubble spray model is air-inducted providing a full stream of water while using less
•5-year warranty against any manufacturing related defect
Item Number flow Rate / Description
N3601N 3.8 LPM (1.0 GPM) Needle
N3601B 3.8 LPM (1.0 GPM) Bubble
N3602N 5.7 LPM (1.5 GPM) Needle
N3602B 5.7 LPM (1.5 GPM) Bubble
APPlIcATIoNPotable Water
AssEmblY DETAIlsConsists of aerator body and all internal parts necessary for operation
mATERIAlsbody: ABS polyethylene Internal Parts: Acetal (POM), high heat rubber gaskets & flow compensator
PAckAgINgIndividually wrapped aerator assemblies, packed 500 parts per carton
THREADsInlet Dual Thread Design 15/16"-27 male thread / 55/64"-27 female thread
cERTIfIcATIoN(s)Meets or exceeds: ASME A112.18.1 / B125.1, ANSI/NSF 61
Chrome plated parts meet performance requirements for corrosion testing per standard ASTM B368
WaterSense certified
SPECiAL iNSTALL KEY FOR DUAL-THREAD CONNECTiON
27 mm (1.1")
27 mm (1.1")
24 mm (0.9")
50
Dual-Spray Kitchen Aerator
Modern and sleek, the Dual-Spray Kitchen Aerator delivers a great spray at any water pressure. Switch from an aerated bubble spray to needle spray with a twist of the body. Soft rubber water jet-ways allow for easy cleaning.
• 5.7 LPM (1.5 GPM) flow rate
• Niagara’s patented non-removable pressure compensator provides a constant output of water regardless of pressure
• (2) spray functions: Air inducted soft bubble steam and forceful needle spray pattern of 20 individual streams
• PoM ball joint with 360° swivel, virtually lead-free aerator
• Soft rubber nozzles for easy cleaning and decalcification
•Sleek, modern housing
• Dual-thread brass connection, Male: 15/16-27 Female: 55/64-27
•5-year warranty against any manufacturing related defect
Item Number color / flow Rate
N3126P White/Chrome 5.7 LPM (1.0 GPM)
N3126P-C Chrome 5.7 LPM (1.0 GPM)
APPlIcATIoNPotable Water
AssEmblY DETAIlsConsists of aerator body and all internal parts necessary for operation
mATERIAlsbody: Chrome plated durable ABS plastic, white color durable ABS plastic
Internal Parts: ABS & Acetal (POM) plastics, high heat rubber gaskets & flow compensator
PAckAgINgIndividually bagged aerator assemblies, packed 300 parts per carton
THREADsInlet Dual Thread Design 15/16"-27 male thread / 55/64"-27 female thread
cERTIfIcATIoN(s)Meets or exceeds: ASME A112.18.1 / B125.1, ANSI/NSF 61
Chrome plated parts meet performance requirements for corrosion testing per standard ASTM B368
WaterSense certified
56 mm (2.2")
33 mm (1.3")
15/16-27 – 55/64-27DUAL THREAD
TWiST TO CHANGE
SPRAY SETTiNG
360° SWiVEL
DUAL SPRAY
51
Dual-Spray Kitchen Aerator with Pause Valve
The Dual-Spray Kitchen Aerator with pause valve offers all of the great features of the Dual-Spray Kitchen Aerator, but this version has our exclusive on/off valve allowing for additional convenience and savings.
•Sleek, modern housing
• 5.7 liter per minute flow rate (1.5 gallon per minute)
• Niagara’s patented non-removable pressure compensator provides a constant output of water regardless of pressure
• (2) spray functions: Soft bubble steam and needle spray pattern of 20 individual streams
• Tip-touch control valve allows trickle “on” without resetting water flow or temperature
•PoM ball joint with 360° swivel, virtually lead-free aerator
• Soft rubber nozzles for easy cleaning and decalcification
• Dual-thread brass connection, Male: 15/16-27 Female: 55/64-27
•SASo certified
•5-year warranty against any manufacturing related defect
Item Number color / flow Rate
N3126VP White w/pause valve 5.7 LPM (1.5 GPM)
N3126VP-C Chrome w/pause valve 5.7 LPM (1.5 GPM)
APPlIcATIoNPotable Water
AssEmblY DETAIlsConsists of aerator body and all internal parts necessary for operation
mATERIAlsbody: Chrome plated durable ABS plastic, white color durable ABS plastic
Internal Parts: ABS & Acetal (POM) plastics, high heat rubber gaskets & flow compensator
PAckAgINgIndividually bagged aerator assemblies, packed 300 parts per carton
THREADsInlet Dual Thread Design 15/16"-27 male thread / 55/64"-27 female thread
cERTIfIcATIoN(s)Meets or exceeds: ASME A112.18.1 / B125.1, ANSI/NSF 61
Chrome plated parts meet performance requirements for corrosion testing per standard ASTM B368
WaterSense certified
15/16-27 – 55/64-27DUAL THREAD
65 mm (2.5")
33 mm (1.3")
PAUSE ACTiONLEVER
TWiST TO CHANGE
SPRAY SETTiNG
360° SWiVEL
52
Dual-Spray Kitchen Aerator with Pause Valve
Niagara’s Dual-Spray Kitchen Aerator provides a powerful and efficient 5.7 LPM (1.5 GPM) flow. Easily switch from a wide and forceful needle spray to a splash-free solid stream with a quick flip of the finger. Features a 360° swivel action for directional spray and convenience. With a Niagara patented flow compensator, the dual-spray kitchen swivel aerator delivers a consistent flow regardless of available water pressure. For extra water and monetary savings, make use of the pause valve that reduces water to a trickle while maintaining an even temperature.
• Niagara’s patented non-removable pressure compensator provides a constant output of water regardless of pressure
•PoM ball joint with 360° swivel
• Pause action reduces flow to a trickle while keeping temperature consistent
• Control from soft spray to solid stream, with up-and-down action to change spray settings
•Rubberized grip for easy adjustment
• Saves 30% more water and energy than a standard aerator
•Dual threads for easy installation
•5-year warranty against any manufacturing related defect
Item Number flow Rate
N3115VP-FC 5.7 LPM (1.5 GPM)
APPlIcATIoNPotable Water
AssEmblY DETAIlsConsists of aerator body and all internal parts necessary for operation
mATERIAlsbody: Chrome plated durable ABS plastic,
Internal Parts: ABS & Acetal (POM) plastics, high heat rubber gaskets & flow compensator
PAckAgINgIndividually bagged aerator assemblies, packed 300 parts per carton
THREADsInlet Dual Thread Design 15/16"-27 male thread / 55/64"-27 female thread
cERTIfIcATIoN(s)Meets or exceeds: ASME A112.18.1 / B125.1, ANSI/NSF 61
Chrome plated parts meet performance requirements for corrosion testing per standard ASTM B368
WaterSense certified
PAUSE ACTiONLEVER
360° SWiVEL
GRiP AND PULL DOWN TO CHANGE
SPRAY SETTiNG
35 mm(1.375")
60-64 mm(2.375-2.5")
53
Tri-Max™ Aerators
Conservation with a twist! Tri-Max™ is a unique, three flow rate aerator, allowing you to match your flow rate to your task and save more.
• Three pressure compensated flow rate options 1.8, 3.8 and 5.7 LPM (0.5, 1.0 and 1.5 GPM)
• Patented Flex-Flow™ technology, a unique 3-way pressure compensating device. Non-removable and provides a constant output of water regardless of pressure at the selected flow rate
• Turn-dial for selecting flow rate
•SASo Certified
•5-year warranty against any manufacturing related defect
for N3610cH
• Stylish, modern housing constructed from ABS—a precision engineered thermoplastic
•Dual-thread connection (Male 15/16-27 Female: 55/65-27) has no visible threads. The non-stripping PoM threading component comes with a special install key
for N3615cH
•Easy grip turn-dial
• Dual-thread connection (Male 15/16-27 Female: 55/65-27)
Item Number color / flow Rate / Description
N3610CH Chrome 1.8 / 3.8 / 5.7 LPM (0.5 / 1.0 / 1.5 GPM) Needle
N3615CH Chrome/Black 1.8 / 3.8 / 5.7 LPM (0.5 / 1.0 / 1.5 GPM) Needle
APPlIcATIoNPotable Water
AssEmblY DETAIlsConsists of aerator body and all internal parts necessary for operation
mATERIAlsN3610cH: ABS polyethylene (body) N3615cH: High polished chrome plated brass (body) Internal Parts: Chrome plated brass, ABS and POM plastics & high heat rubber gaskets and pressure compensator
PAckAgINgIndividually bagged aerator assemblies, packed 100 parts per carton
THREADsDual-thread connection, Male: 15/16-27 Female: 55/64-27
cERTIfIcATIoN(s)Meets or exceeds: ASME A112.18.1 / B125.1, ANSI/NSF 61
WaterSense certified
22 mm (0.875")
25 mm (1.375")
(N3610CH)DUAL THREAD
CONNECTiON iNSTALL KEY
3 FLOW RATESNEEDLE SPRAY
25 mm (1")
29 mm (1.125")
N3610CH
N3615CH
N3610CH
N3615CH
Bathroom Sink Aerators
FINISHES
FLOW RATESN3205N-PC
1.9 LPM/ 0.5 GPM
• 1.9 LPM (0.5 GPM) maximum flow at pressure of 183 kPa (27 psi)
• Pressure compensator delivers a minimum flow 1.4 LPM (0.33 GPM) at 23 kPa (3.3 psi) and maintains constant flow of 1.9 LPM (0.5 GPM) from 70 to 183 kPa (30 to 80 psi)
• Maintains rated supply pressure of 230 kPa (33 psi)
N3210N-PC N3210B-PC
3.8 LPM/ 1.0 GPM
• 3.8 LPM (1.0 GPM) maximum flow at pressure of 366 kPa (54 psi)
• Pressure compensator delivers a minimum flow 2.8 LPM (0.66 GPM) at 46 kPa (6.6 psi) and maintains constant flow of 3.8 LPM (1.0 GPM) from 140 to 366 kPa (60 to 160 psi)
• Showerhead maintains rated supply pressure of 460 kPa (66 psi)
N3215N-PC N3215B-PC
5.7 LPM/ 1.5 GPM
• 5.7 LPM (1.5 GPM) maximum flow at pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 4.2 LPM (1.1 GPM) at 70 kPa (10 psi) and maintains constant flow of 5.7 LPM (1.5 GPM) from 210 to 550 kPa (30 to 80 psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
700.0
1.5
3.0
4.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
Aerator Flow Rates & Finishes
Male Tamperproof Aerators
FINISHES
FLOW RATES
N3205NMTP-PC-T
1.9 LPM/ 0.5 GPM
• 1.9 LPM (0.5 GPM) maximum flow at pressure of 183 kPa (27 psi)
• Pressure compensator delivers a minimum flow 1.4 LPM (0.33 GPM) at 23 kPa (3.3 psi) and maintains constant flow of 1.9 LPM (0.5 GPM) from 70 to 183 kPa (30 to 80 psi)
• Maintains rated supply pressure of 230 kPa (33 psi)
Needle Bubble
Needle Bubble
704.0
4.5
5.0
5.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
54
700.0
1.5
3.0
4.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
700.0
1.5
3.0
4.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
Male Tamperproof Aerators...continued
FINISHES
FLOW RATESN3210NMTP-PC-T N3210BMTP-PC-T
3.8 LPM/ 1.0 GPM
• 3.8 LPM (1.0 GPM) maximum flow at pressure of 366 kPa (54 psi)
• Pressure compensator delivers a minimum flow 2.8 LPM (0.66 GPM) at 46 kPa (6.6 psi) and maintains constant flow of 3.8 LPM (1.0 GPM) from 140 to 366 kPa (60 to 160 psi)
• Maintains rated supply pressure of 460 kPa (66 psi)
N3215NMTP-PC-T N3215BMTP-PC-T
5.7 LPM/ 1.5 GPM
• 5.7 LPM (1.5 GPM) maximum flow at pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 4.2 LPM (1.1 GPM) at 70 kPa (10 psi) and maintains constant flow of 5.7 LPM (1.5 GPM) from 210 to 550 kPa (30 to 80 psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
700.0
1.5
3.0
4.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
Female Tamperproof Aerators
FINISHES
FLOW RATES
N3205NFTP-PC-T
1.9 LPM/ 0.5 GPM
• 1.9 LPM (0.5 GPM) maximum flow at pressure of 183 kPa (27 psi)
• Pressure compensator delivers a minimum flow 1.4 LPM (0.33 GPM) at 23 kPa (3.3 psi) and maintains constant flow of 1.9 LPM (0.5 GPM) from 70 to 183 kPa (30 to 80 psi)
• Maintains rated supply pressure of 230 kPa (33 psi)
N3210NFTP-PC-T N3210BFTP-PC-T
3.8 LPM/ 1.0 GPM
• 3.8 LPM (1.0 GPM) maximum flow at pressure of 366 kPa (54 psi)
• Pressure compensator delivers a minimum flow 2.8 LPM (0.66 GPM) at 46 kPa (6.6 psi) and maintains constant flow of 3.8 LPM (1.0 GPM) from 140 to 366 kPa (60 to 160 psi)
• Maintains rated supply pressure of 460 kPa (66 psi)
700.0
1.5
3.0
4.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
Aerator Flow Rates & Finishes
700.0
1.5
3.0
4.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
704.0
4.5
5.0
5.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
55
Needle Bubble
Needle Bubble
Female Tamperproof Aerators...continued
FINISHES
FLOW RATES
N3215NFTP-PC-T N3215BFTP-PC-T
5.7 LPM/ 1.5 GPM
• 5.7 LPM (1.5 GPM) maximum flow at pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 4.2 LPM (1.1 GPM) at 70 kPa (10 psi) and maintains constant flow of 5.7 LPM (1.5 GPM) from 210 to 550 kPa (30 to 80 psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
Lead-Free Aerators
FINISHES
FLOW RATES
3.8 LPM/ 1.0 GPM
N3601N N3601B
• 3.8 LPM (1.0 GPM) maximum flow at pressure of 366 kPa (54 psi)
• Pressure compensator delivers a minimum flow 2.8 LPM (0.66 GPM) at 46 kPa (6.6 psi) and maintains constant flow of 3.8 LPM (1.0 GPM) from 140 to 366 kPa (60 to 160 psi)
• Maintains rated supply pressure of 460 kPa (66 psi)
5.7 LPM/ 1.5 GPM
N3602N N3601B
• 5.7 LPM (1.5 GPM) maximum flow at pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 4.2 LPM (1.1 GPM) at 70 kPa (10 psi) and maintains constant flow of 5.7 LPM (1.5 GPM) from 210 to 550 kPa (30 to 80 psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
700.0
1.5
3.0
4.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
Aerator Flow Rates & Finishes
704.0
4.5
5.0
5.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
704.0
4.5
5.0
5.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
56
Needle Bubble
Needle Bubble
Dual-Spray Kitchen Aerators
Chrome White/ Chrome Chrome w. Pause White/ Chrome w. Pause
FLOW RATES
5.7 LPM/ 1.5 GPM
N3126P-C N3126P N3126VP-C N3126VP
• 5.7 LPM (1.5 GPM) maximum flow at pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 4.2 LPM (1.1 GPM) at 70 kPa (10 psi) and maintains constant flow of 5.7 LPM (1.5 GPM) from 210 to 550 kPa (30 to 80 psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
Dual-Spray Kitchen Aerator w/Pause Valve
FINISHES
FLOW RATES
N3115VP-FC
5.7 LPM/ 1.5 GPM
• 5.7 LPM (1.5 GPM) maximum flow at pressure of 550 kPa (80 psi)
• Pressure compensator delivers a minimum flow 4.2 LPM (1.1 GPM) at 70 kPa (10 psi) and maintains constant flow of 5.7 LPM (1.5 GPM) from 210 to 550 kPa (30 to 80 psi)
• Maintains rated supply pressure of 690 kPa (100 psi)
Aerator Flow Rates & Finishes
704.0
4.5
5.0
5.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
704.0
4.5
5.0
5.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
57
White/Black
Tri-Max™ Aerators
FINISHES
Chrome Chrome/Black
FLOW RATES
N3610CH N3615CH
1.8 LPM/ 0.5 GPM;
3.8 LPM/ 1.20 GPM;
5.7 LPM/ 1.5 GPM
• 0.5 setting delivers a minimum flow of 1.1 LPM (0.3 GPM) at 70 kPa (10 psi) and maintains constant flow of 1.9 LPM (0.5 GPM) from 210 to 550 kPa (30 to 80 psi)
• 1.0 setting delivers a minimum flow of 2.7 LPM (0.7 GPM) at 70 kPa (10 psi) and maintains constant flow of 3.8 LPM (1.0 GPM) from 210 to 550 kPa (30 to 80 psi)
• 1.5 setting delivers a minimum flow of 3.4 LPM (0.9 GPM) at 70 kPa (10 psi) and maintains constant flow of 5.7 LPM (1.5 GPM) from 210 to 550 kPa (30 to 80 psi)
0.0
0.8
1.5
2.3
3.0
3.8
4.5
5.3
6.0
70 140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
5.7 Pressure Compensated Spray
Non-PressureCompensated Spray
3.8 Pressure Compensated Spray
1.9 Pressure Compensated Spray
Aerator Flow Rates & Finishes
58
59
PLUMBING & water effIcIeNt ProdUcts
Savings, Style and PerformanceNiagara’s retail offerings include many popular water-efficient products, including a complete line of ultra-high efficiency showerheads and aerators. These products are all stylish with innovative function and the most advanced water-efficient technology available today.
RETAIL
Retail Showerheads
Retail Aerators
60
Earth® 9 Jet Turbo Massage Showerhead
Tri-Max™ Aerator
Rainfall Spa Showerhead
Bi-Max Showerhead
Luxury Heavy Duty Showerhead
1.0 GPM Dual Thread Aerator (Bubble or Needle)
Tri-Max™ Showerhead
Vara Spa™
Fixed Mount Showerhead
Tri-Max™ Aerator Chrome/Black
1.5 GPM Dual Thread Aerator (Bubble or Needle)
1.5 GPM Lead Free Aerator(Bubble or Needle)
1.0 GPM Lead Free Aerator(Bubble or Needle)
Sava Spa Showerhead
Vara Spa™
Handheld Showerhead
Vara Spa™
Handheld & Fixed Mount Combo Showerhead
61
PLUMBING & water effIcIeNt ProdUcts
Unsurpassed Savingsour water-saving devices can be used throughout the home and even outdoors to provide maximum performance and financial savings while protecting the environment. These conservation tools will save on water and utility bills without sacrificing performance.
ACCESSoRIES
Water Miser Garden Hose Nozzle (Commercial Grade)
Water Miser Garden Hose Nozzle (Thermoplastic)
•Non-slip comfort handle grip, rust-resistant
•Stainless steel latch
• Instant on/off control
•Spray adjustment knob
• 114 mm (4.5") long handle grip area for added comfort and ease of use
•Brass adjuster rod and nut
• Metal handle
•6 precision spray patterns
• Consists of spray valve body and all internal parts necessary for operation, plastic adjustable face plate
• Aluminum body with rubber non-slip insulating grip, steel handle, ABS plastic adjustment knob with rubber grip, brass adjuster rod & nut.
•5-year warranty against any manufacturing related defect
•Non-slip comfort handle grip, rust-resistant
•Stainless steel latch
• Instant on/off control
•Spray adjustment knob
•114 mm (4.5") long handle grip area for added comfort and ease of use
•Plastic adjuster rod and nut
• Plastic handle
•6 precision spray patterns
• Consists of spray valve body and all internal parts necessary for operation, plastic adjustable face plate
• Durable ABS plastic body with rubber non-slip insulating grip, plastic handle, ABS plastic adjustment knob with rubberized grip
•5-year warranty against any manufacturing related defect
Item Number Description
N2157A Aluminum Commercial Grade
2157A-ADPT15MM 15 mm Hose Adapter
Item Number Description
N2158 Thermoplastic
2157A-ADPT15MM 15 mm Hose Adapter
15 MM HOSE ADAPTER
15 MM HOSE ADAPTER
62
63
Item Number Description
N3137 Tank Bank
Toilet Tank Bank
Niagara’s Toilet Tank Bank™ is an easy-to-use, quick-to-install water saving device. Simply fill it with water and clip onto the inside of the tank wall. With a patented air lock and fill valve, the Tank Bank™ eliminates water evaporation and odors and will never require maintenance.
• Easy to use – fill top, snap to close, and hang in toilet tank (instructions printed on the bag)
•Will not interfere with mechanics
• Tank bank is chlorine/chloramine resistant and constructed of a bio-proof material with 10-year life in toilet tank environment
• Mildew & bacteria resistant tested per standard ASTM G21
•Tear resistant per standard ASTM D1004
• Plastic handle supports up to 6.5 kilogram without breaking
•5-year warranty against any manufacturing related defect
APPlIcATIoNWater displacement in toilet tank
AssEmblY DETAIlsBlue vinyl heat-sealed bag with plastic hang handle & red vinyl cap (heat-sealed into bag opening)
mATERIAlsbag: Blue vinyl (PVC) – thickness = 0.25 mm ± 0.025 (10 mil ± 1) 197 mm (7.75") side-to-side x 305mm (12") top seam-to-bottom seam Handle: ABS plastic – Grey color Length: 71.6mm (2.8"), Internal width: Ref 17 mm (0.8") cap: Red vinyl (PVC) Inner diameter: 25.4 mm (1")
cERTIfIcATIoN(s)Meets: ANSI/ASME specifications
305 mm (12")
197 mm (7.75")
EASY TO USE
64
78 mm(3.1")
27 mm(1.1")
112 mm (4.4")
G 1/2THREADMTP
AERATOR
58 mm(2.3")
Part# C3202
Item Number flow Rate
N3421-NCC 5.7 LPM (1.5 GPM)
Super Faucet
•Single operating valve control for use with one hand
• Needle spray pattern consists of (18) holes each 0.9–1.0 mm diameter
•Niagara’s patented non-removable pressure compensator provides a constant output of water regardless of pressure
•Water flow is a symmetrical, conical pattern
• Tamperproof aerator body is only accessible with special key (Also Available with standard Dual Threads Aerator)
• Meets or exceeds the following: ASME A112.18.1 / CSA B125.1 / ANSE/NSF 61
•5-year warranty against any manufacturing related defect
APPlIcATIoNPotable Water
AssEmblY DETAIlsConsists of faucet body, tamperproof handle and all internal parts necessary for operation & tamperproof aerator
mATERIAlsfaucet body: High polished chrome plated brass. Handle: High-polished chrome plated zinc die casting faucet Internal Parts: Brass, stainless steel, and high heat rubber o-rings & plastic gaskets Aerator body: High polished chrome plated brass Aerator Internal Parts: Acetal (POM), high heat rubber gaskets & flow compensator
THREADsfaucet: Inlet size: G1/2 male thread, Outlet size: 15/16-27 female thread Aerator: Inlet size: 15/16-27 male thread
cERTIfIcATIoN(s)Faucet meets or exceeds the following standard(s): ASME A112.18.1 / CSA B125.1, ANSI/NSF 61 Chrome plated parts meet performance requirements for corrosion testing per standard ASTM B368
Niagara’s Super Faucet is completely tamperproof and is commercial grade meaning it can stand up to all usages. Niagara’s patented pressure compensating aerator revolutionizes the flow of water. A simple device that saves thousands of gallons a year without sacrificing the pressure or performance.
704.0
4.5
5.0
5.5
6.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
65
Item Number Description
N2180 Pre-Rinse Spray Valve
N2180-AUS Adapter
Pre-Rinse Spray Valve
Niagara’s Power Rinser Pre-Rinse Spray Valve produces a vigorous spray pattern that increases performance and water-saving efficiency over older models. Niagara’s Power Rinser uses only 4.8 LPM (1.28 GPM) and is certified by the Food Services Technology Center.
• 4.8 LPM (1.28 GPM) maximum flow at pressure of 410 kPa (60 psi)
•Solid brass fitting means no leaks
• Interchangeable with all brands
•Standard, protective, full surrounding dish guard bumper
• High power fan spray, width measures 76 mm (3") wide minimum at a distance of 229 mm (9") from spray nozzle
•PRSV maintains rated supply pressure of 690 kPa (100 psi)
• Functions at maximum working pressure of 860 kPa (125 psi)
• Functions within rated supply temperature from 5 to 71°C (40 to 160°F)
•Adapter sold separately
•5-year warranty against any manufacturing related defect
APPlIcATIoNPotable Water
AssEmblY DETAIlsConsists of spray valve body and all internal parts necessary for operation
mATERIAlsbody: High polished chrome plated brass Internal Parts: Stainless steel, brass, POM plastic & EDPM rubber gaskets
PAckAgINgIndividually bagged & packed in white chipboard box, packed 20 parts per carton
THREADsInlet size: 3/4-14 UNS male thread
cERTIfIcATIoN(s)Spray valve meets or exceeds the following standard(s): ASME A112.18.1 / CSA B125.1, ANSI/NSF 61, AS/NZS 3718 (Australia), AS/NZS 6400 (Australia), Watermark/WELS Certified (Australia) Chrome plated parts meet performance requirements for corrosion testing per standard ASTM B368
51 mm(2")
73 mm(2.9")
192 mm(7.5")
102 mm(4")
3/4-14UNS THREAD
HANDLE CLIP
51 mm(2")
73 mm(2.9")
192 mm(7.5")
102 mm(4")
3/4-14UNS THREAD
HANDLE CLIP
701.0
2.0
3.0
4.0
5.0
140 210 275 345 410 480 550
Flo
w (L
PM
)
Pressure (kPa)
PressureCompensated Spray
Non-PressureCompensated Spray
ADAPTER (N2180-AUS)SOLD SEPARATELY
Large capacity, UV-resistant, one-piece rain gauge
• Increments in both English and Metric units of measurements up to 50 mm (2")
• Measure rainfall and adjust lawn sprinkling accordingly
•No assembly required
As water conservation becomes increasingly essential, this great water-saving device will train you to save water while showering. The Shower Coach™ shower timer times exactly 5 minutes, showing you when it’s time to turn the shower off.
•Large suction cup for great holding power
• High-impact ABS white plastic sand timer helps change shower habits from long to short showers
• Safe, durable, ultra break-resistant
•Custom imprinting available (large orders only)
A great tool to teach water conservation practices! This water wheel is designed for easy imprinting of your company’s name and special message. Perfect for water conservation events, school programs, open house visits, and new customer kits.
Detects leaks in large or small toilets. Darker color for easy detection.
• Tablets contain only FDA-certified, non-toxic, non-carcinogenic pigments – not harmful if swallowed
• Easy to follow instructions, printed in both English and Spanish
• Packaged in moisture-resistant packs
Rain Gauge
Shower Coach™ Shower TimercUsTomIZAblE!
Water Conservation WheelcUsTomIZAblE!
Leak Detection Dye Tablets
Item Number Description
N3179 Blue
Item Number Description
N9116G Conservation Wheel-English
Item Number Description
N3140 2 per pkg
N3141 4 per pkg + leak detection tablets on leak check card
Item Number Description
N2146 Blue
Water Accessories
66
Item Number color
N3164 Blue
Item Number flow Rate
N4101 1.3 x 152.5 cm (0.5 x 60")
Inexpensively saves up to 50% of the fill cycle water – up to 6.8 liters per flush (1.8 GPF)
•Prevents leaks during fill cycle
• Make your toilet more efficient with this simple device
•No adjustments required
•Easy installation
• Individually packaged with instructions printed on the envelope
•No tools needed
Extra heavy-duty plumber’s tape makes quick work of sealing and lubricating male pipe threads of all sizes.
•1.3 x 152.5 cm roll (0.5 x 60")
More accurate with metric readings
• Place the small cylindrical cup under a drip, then calculate how many liters/gallons of water are wasted daily and/or weekly.
• Measurements and instructions for calculations are printed on the gauge
Niagara’s Shower Meter Displacement Bag helps determine the flow rate of your showerhead. Replacing an inefficient model with a low flow showerhead can drastically reduce your water usage and expenditures.
• Place Shower Meter Water Displacement Bag under your showerhead to observe flow rate
•operating instructions are printed on the bag
Toilet Fill Cycle Diverter
Plumber’s Tape
Drip Gauge
Shower Flow Meter Water Displacement Bag
Item Number Description
N3132-M Drip Gauge
Item Number Description
S2064 Displacement Bag
Water Accessories
67
68
PLUMBING & water effIcIeNt ProdUcts
Exceeding Standards in Savings, Quality and PerformanceNiagara Conservation is committed to providing our customers with water-saving products of the highest quality that offer outstanding performance and maximum savings results. Consequently, we strive to meet and exceed the latest industry conservation standards.
our products are tested for performance and efficiency by independent third parties, including IAPMo R&T and CSA International, the U.S. Environmental Protection Agency (EPA). Niagara is a partner in EPA’s WaterSense program, which seeks to help save water for future generations by promoting water efficiency and WaterSense-labeled products. Products with the WaterSense label are those that have been evaluated and proven to be 20 percent more water efficient than average products in their category, while performing as well or better than their less-efficient counterparts. Most of Niagara’s products carry or are eligible to carry the WaterSense label. Niagara has been named a WaterSense Excellence Award winner by the EPA in the manufacturer category.
Through the company’s extensive and efficient product line, Niagara consistently reaffirms its commitment to deliver innovative products that save water while maintaining optimal performance.
TEST REPoRTS & CERTIFICATES
Test Reports & Certificates
69
Test Reports & Certificates
70
Test Reports & Certificates
71
Test Reports & Certificates
72
Test Reports & Certificates
73
Test Reports & Certificates
74
Test Reports & Certificates
75
Test Reports & Certificates
76
Middle East Regional OfficeNational Water Company H.Q. | King Fahad Road
Riyadh 11375 | Kingdom of Saudi Arabia 966-1-440-7852 | Fax 966-1-440-7851
Contact: Walid Daniel - Director, Middle East Operations & [email protected]
MEWC41013 REV 4/10/13