Upload
melissa-campbell
View
230
Download
8
Tags:
Embed Size (px)
DESCRIPTION
Features key information regarding OLED, LCD and VFD technology, helpful design tools, development tools, full product listing and specification for products carried by Newhaven Display International, LLC. This catalog is ideal for Project Managers, Design Engineers, CMs and OEMs.
Citation preview
OLED, LCD and VFD Technologies
2011 PRODUCT CATALOGFeaturing
WWW.NEWHAVENDISPLAY.COM
Company ProfileNewhaven Display provides the North American marketplace with cost effective high quality OLED, LCD, and VFD display devices.In addition to our vast standard part offerings, we develop custom designs for all industries. We pride ourselves on first-rate customer support and development assistance.
We have two office locations, USA and China. All products are stocked at our Elgin, Illinois USA warehouse. Marketing is done through a nationwide network of independent sales representatives and stocking distributors. All displays are manufactured at our partner factories located in Mainland China and Taiwan. These are state-of-the-art facilities with over 17 years of experience with QS-9000, ISO-9001, ISO-14001 and TS-16949 certifications.
Your Advantages
Newhaven Display customers enjoy a 7-point advantage by using our products:
1) PRODUCT KNOWLEDGE: Our staff consists of industry experts with a clear focus on current display technologies being developed for the North American marketplace.
2) GLOBAL DISPLAY TECHNOLOGY SOLUTIONS: Utilizing our global partner/supplier relationships, our customers enjoy the most basic display solutions to highly complex turnkey solutions. We offer one of the largest supplies of standard displays in the industry.
3) COST EFFECTIVE PRODUCTS: Our high quality products are manufactured in state-of-the-art ISO certified factories located throughout Mainland China and Taiwan.
4) TIME TO MARKET: Our expedited lead times allow customers to go from product idea to actual production faster than anyone else in the market. We maintain this speed by offering JIT/MRP programs.
5) TECHNICAL SUPPORT: Our Engineering Department provides high quality hardware and software design support.
6) US ENVIRONMENTAL TESTING: Our US facility in Elgin, Illinois offers state-of-the-art temperature, humidity and vibration testing.
7) VALUE-ADD SERVICES: In addition to modifying displays, we offer custom plastic injection molding, metal stamping and complete assembly productions.
“Global Sourcing, Expert Design, Quality Displays”
We strive to be the best so that your product can top the competition.
WWW.NEWHAVENDISPLAY.COM
ContentsLiquid Crystal Display (LCD) ................... 2-1
LCD Display Modes ................................... 2-2 LCD Light Modes........................................2-3 LCD Backlights ...........................................2-4 LCD Connectors ........................................2-6 LCD Character Font Tables ........................ 2-7 LCD Product Tables ................................... 2-8
Organic Light Emitting Diode (OLED) ...1-1
OLED Technology ...................................... 1-2 OLED Character Font Tables ...................... 1-3 OLED Product Tables ................................. 1-4
Development Tools .....................................3-1
NHDev Development Board ......................3-1LCD Controller Boards .............................3-2
Vacuum Fluorescent Display (VFD) ........4-1
VFD Classifications ................................... 4-2VFD Terminology .......................................4-3VFD Product Tables ...................................4-4
Specs and Mechanical Drawings ..............5-1
OLED Specs .............................................5-2 LCD Specs ...............................................5-11 VFD Specs ................................................5-130
OLEDDisplays
WWW.NEWHAVENDISPLAY.COM 1-1
OLED DISPLAY - Technology
OLEDTechnology
Organic Light Emitting Diode (OLED) Displays are brighter, higher contrast displays, have faster response times, wider viewing angles and use less power than the conventional VFD, LED or LCD displays. OLED Displays are self-illuminating and require no backlight for maximum visibility in all environments. This allows OLEDs to be significantly thinner than standard VFD, LED or LCD displays.
OLED Displays are made up of a layer of organic material placed between two conductors (see Fig.1). These two conductors (an anode and a cathode) are then positioned between a glass top plate (seal) and a glass bottom plate (substrate). When an electric current is applied to the two conductors, the organic material produces a bright, electroluminescent light. When energy passes from the negatively charged layer (cathode) to the other (anode) layer, it stimulates the organic material between the two, which in turn, emits light that’s visible through the outermost layer of glass.
How it works
In order for OLED displays to produce color, an electric current is needed to stimulate the relevant pixels on the OLED display. The pixels are created by the perpendicular arrangement of the cathodes and anodes (see Fig. 2). Light is emitted where these intersect. The electric current applied to the selected strips of anodes and cathodes determine which pixels get turned on and which pixels remain off. The brightness of each pixel is proportional to the amount of applied current.
How color is produced
Cathode
Emissive Layer (Organic Molecules or Polymers)
Conductive Layer(Organic Molecules or Polymers)
Anode
Substrate
Structure of OLED Display
1-2
Figure 1
Figure 2
WWW.NEWHAVENDISPLAY.COM
OLED DISPLAY - Character Font Tables
English / Japanese Character Font Table English / Russian Character Font Table
Western European Character Font Table 1 Western European Character Font Table 2
Upper 4-bitLower
4-bit
LLLL
LLLL
LLHL
LLHH
LHLL
LHLH
LHHL
LHHH
HLLL
HLLH
HLHH
HLHL
HHLL
HHLH
HHHL
HHHH
CGRAM(1)
CGRAM(2)
CGRAM(3)
CGRAM(4)
CGRAM(5)
CGRAM(6)
CGRAM(7)
CGRAM(8)
CGRAM(9)
CGRAM(10)
CGRAM(11)
CGRAM(12)
CGRAM(13)
CGRAM(14)
CGRAM(15)
CGRAM(16)
LLLL LLLH LLHL LLHH LHLL LHLH LHHL LHHH HLLL HLLH HLHL HLHH HHLL HHLH HHHL HHHHUpper 4-bitLower
4-bit
LLLL
LLLL
LLHL
LLHH
LHLL
LHLH
LHHL
LHHH
HLLL
HLLH
HLHH
HLHL
HHLL
HHLH
HHHL
HHHH
CGRAM(1)
CGRAM(2)
CGRAM(3)
CGRAM(4)
CGRAM(5)
CGRAM(6)
CGRAM(7)
CGRAM(8)
CGRAM(9)
CGRAM(10)
CGRAM(11)
CGRAM(12)
CGRAM(13)
CGRAM(14)
CGRAM(15)
CGRAM(16)
LLLL LLLH LLHL LLHH LHLL LHLH LHHL LHHH HLLL HLLH HLHL HLHH HHLL HHLH HHHL HHHH
Upper 4-bitLower
4-bit
LLLL
LLLL
LLHL
LLHH
LHLL
LHLH
LHHL
LHHH
HLLL
HLLH
HLHH
HLHL
HHLL
HHLH
HHHL
HHHH
CGRAM(1)
CGRAM(2)
CGRAM(3)
CGRAM(4)
CGRAM(5)
CGRAM(6)
CGRAM(7)
CGRAM(8)
CGRAM(9)
CGRAM(10)
CGRAM(11)
CGRAM(12)
CGRAM(13)
CGRAM(14)
CGRAM(15)
CGRAM(16)
LLLL LLLH LLHL LLHH LHLL LHLH LHHL LHHH HLLL HLLH HLHL HLHH HHLL HHLH HHHL HHHHUpper 4-bitLower
4-bit
LLLL
LLLL
LLHL
LLHH
LHLL
LHLH
LHHL
LHHH
HLLL
HLLH
HLHH
HLHL
HHLL
HHLH
HHHL
HHHH
CGRAM(1)
CGRAM(2)
CGRAM(3)
CGRAM(4)
CGRAM(5)
CGRAM(6)
CGRAM(7)
CGRAM(8)
CGRAM(9)
CGRAM(10)
CGRAM(11)
CGRAM(12)
CGRAM(13)
CGRAM(14)
CGRAM(15)
CGRAM(16)
LLLL LLLH LLHL LLHH LHLL LHLH LHHL LHHH HLLL HLLH HLHL HLHH HHLL HHLH HHHL HHHH
OLEDFont Tables
1-3
OLED Character Displays
OLED PRODUCT TABLES
SpecPage
Lines x Characters
Newhaven Part Number
Display Mode/Color Options
(ending prefixes)
Module Size
(W x H)mm
Interface Brightness cd/m2
Life to 1/2 Brightness
(hrs)
Operating Temperature
5-3 2 x 16 NHD-216KZW-A Y5 (Yellow)
G5 (Green)
B5 (Blue)
80 x 36 Parallel/ 3-wire SPI
125 50K -40oC - +80oC
5-4 2 x 16 NHD-0216SZW-B Y5 (Yellow)
G5 (Green)
122 x 40 Parallel/ 3-wire SPI
90 50K -40oC - +80oC
5-5 2 x 20 NHD-0220DZW-A Y5 (Yellow)
G5 (Green)
116 x 37 Parallel/ 3-wire SPI
125 50K -40oC - +80oC
5-6 4 x 20 NHD-0420DZW-A Y5 (Yellow)
G5 (Green)
98 x 60 Parallel/ 3-wire SPI
90 50K -40oC - +80oC
Key Features:
- Fast response time: 10 µs-Wide viewing angle: up to 160°- Thin designs- Self-illuminated; no backlight necessary- Low power consumption- High brightness- High contrast ratio: 200:1- Wide operation temperature: -40°C to +80°C- Serial or parallel MPU interface- Character Module OLEDs include 4 built-in font tables.- RoHS Compliant
The Character OLEDs can be used as compatible replacement displays for some of our Character LCD displays and VFD displays. To the right is a chart indicating which LCD Character and VFD modules the Character OLEDs can replace.
Compatible Displays
Character OLED Models Character LCD Models VFD Module Models
NHD-0216KZWNHD-0216SZWNHD-0220DZWNHD-0420DZW
NHD-0216K1ZNHD-0216SZNHD-0220DZNHD-0420DZ
M0216SD-162SDAR2-1M0216MD-162MDBR2-JM0220SD-202SDAR1M0420SD-204SDAR1-3
1-4
WWW.NEWHAVENDISPLAY.COM
OLED Graphic Displays
Spec Page
Diagonal Size
(inches)
Newhaven Part Number
Display Mode/Color Options(ending prefixes)
Module Size
(W x H)mm
Interface Brightness cd/m2
Life to 1/2 Brightness
(hrs)
Operating Temperature
5-7 2.23 NHD-2.23-12832UC Y3 (Yellow)
B3 (Blue)
63 x 43 8-bit Parallel/I2C/ SPI
120 40K10K (Blue)
-40oC - +85oC
5-8 2.7 NHD-2.7-12864UC Y3 (Yellow) 82 x 47 8-bit Parallel/SPI
100 40K -40oC - +85oC
5-9 2.8 NHD-2.8-25664UC Y2 (Yellow)
B2 (Blue)
85 x 39 8-bit Parallel/ 3-wire SPI or 4-wire SPI
80 40K10K (Blue)
-40oC - +85oC
5-10 3.12 NHD-3.12-25664UC Y2 (Yellow)
B2 (Blue)
89 x 44 8-bit Parallel/3-wire SPI or 4-wire SPI
80 40K10K (Blue)
-40oC - +85oC
OLED PRODUCT TABLES
Key Features:
- Fast response time: 10 µs-Wide viewing angle: up to 160°- Thin designs- Self-illuminated; no backlight necessary- Low power consumption- High brightness- High contrast ratio: 200:1- Wide operation temperature: -40°C to +80°C- Serial or parallel MPU interface- Graphic module OLEDs include required external logic and voltages- RoHS Compliant
Newhaven Display’s Graphic OLED modules are easy to use, all-in-one designs. Most Graphic OLED displays require multiple high-voltage power supplies and external logic components. Newhaven Display’s custom designed module boards for each Graphic OLED allow the user to have just one interface supply. The Graphic OLED module board has all the required external logic components, making it fast and easy to start using the displays.
1-5
01000 000 11010 1010 110100 00
01000 000 11010 1010 110100 00
LCDDisplays
WWW.NEWHAVENDISPLAY.COM 2-1
LCD DISPLAY - Display Modes
Negative type displays provide an image with light pixels on a dark background. The backlight must be used for this type of display and is capable of multiple pixel colors.
Negative Type
Helpful Hint
When starting your next project take into consideration how your application is going to be used. This will help to determine what type of display mode would be ideal for your final, overall look and readability.Display
Modes
LCD Displays can come in different display modes: positive and negative. The type of application in which the display will be used will impact which mode should be selected.
Here is a look at the differences between the two modes.
Positive type displays provide an image with dark pixels on a light background. Ambient light or a backlight can be used for this type of display and is capable of multiple background colors.
Positive Type
2-2
WWW.NEWHAVENDISPLAY.COM
LCD DISPLAY - Light Modes
LCD LightModes
Transflective
Transmissive LCDs always require a backlight and provide the highest brightness display. They are best suited for applications where direct sunlight viewing is not involved.
Backlighting is necessary.
Transflective polarizers have both reflecting and transmitting properties and offer the most versatile viewing characteristics. They can be viewed in direct sunlight and when combined with a backlight in low light conditions.
Ambient light or backlighting can be used for this type of display.
Reflective polarizers are used in high ambient light environments or whenever sufficient power is not available to drive the backlight.
Ambient light is necessary to use this type of display.
B
A
Light GuideReflector
Transmissive
Reflective
Reflector
TransflectorLight Guide
Front PolarizerLCDRear PolarizerReflector
Example of Transmissive Light Mode
Example of Transflective Light Mode
Example of Reflective Light Mode
2-3
Orange LED Backlight “On” White LED Backlight “On”
Blue LED Backlight “On” Yellow-Green LED Backlight “On”
Red LED Backlight “On”
White LED Backlight “On”
Yellow-Green LED Backlight “On” Pure-Green LED Backlight “On”
LCD DISPLAY - Backlights
LCD BacklightColor Options
There are many decisions to make when backlighting an LCD since the color of the display can impact the overall look, feel and functionality of your application. The type of display will also effect the overall look of the display whether it’s STN vs. FSTN, or Positive vs. Negative display modes. Below are examples of the wide variety of backlight colors there are to choose from.
- STN (+) Gray Background - BLUE TEXT- Backlight “Off”
- STN (+) Yellow-Green Background- BLUE TEXT - Backlight “Off”
- STN (-) Blue Background - WHITE TEXT- Backlight “Off”
Display Type: STN(+) Gray Backlight Color Examples
STN Display Types
Display Type: STN(+) Yellow-Green Backlight Color Examples
Display Type: STN(-) Blue Backlight Color Examples
2-4
WWW.NEWHAVENDISPLAY.COM
LCD DISPLAY - Backlights
Red LED Backlight “On” Amber LED Backlight “On”
Orange LED Backlight “On” Blue LED Backlight “On”
White LED Backlight “On” Pure-Green LED Backlight “On”
Red LED Backlight “On” Amber LED Backlight “On”
Orange LED Backlight “On” Blue LED Backlight “On”
White LED Backlight “On” Pure-Green LED Backlight “On”
- FSTN (+) Gray Background- BLACK TEXT- Backlight “Off”
- FSTN (-) Black Background- GRAY TEXT- Backlight “Off”
Helpful Hint
If you are looking for an LCD display that will offer a high contrast ratio and a wider viewing angle, then the FSTN is the perfect polarizer for your project.
Display Type: FSTN(+) Backlight Color Examples
Display Type: FSTN(-) Backlight Color Examples
FSTN Display Types
2-5
LCD DISPLAY - LCD Connectors
The following diagrams are the recommended methods for connecting the LCD panel to the drive circuit.
Connection Method: Mechanical ForcePitch: Minimum 0.4 mmFeatures: -Easy to assemble -Long life -Wide range of applications
Connection Method: SolderPitch: 1mm. ~ 2.45mm.Features: -Stable -Suitable for small production runs
Polarizer
Polarizer
LCD
Pins
PCB
Polarizer
Spacer(in case of separate polarizer)
Bezel (plastic, metal)
Conductive rubber (zebra)
PCB
Polarizer (transflective or reflective)
Rubber Connector
Pin Connector
LCDConnectors
LCD
Solder
Helpful Hint
We use the rubber connector method on our standard displays since it is the most economical and reliable connection method.
2-6
WWW.NEWHAVENDISPLAY.COM
English / Hebrew Character Font Table English / Russian / European Character Font Table
English / Japanese Character Font Table English / European Character Font Table
LCD DISPLAY - LCD Character Font Tables
b7- b4
b3-b0
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1011
1010
1100
1101
1110
1111
CGRAM(1)
CGRAM(2)
CGRAM(3)
CGRAM(4)
CGRAM(5)
CGRAM(6)
CGRAM(7)
CGRAM(8)
CGRAM(1)
CGRAM(2)
CGRAM(3)
CGRAM(4)
CGRAM(5)
CGRAM(6)
CGRAM(7)
CGRAM(8)
0000 0001 0010 0011 0100 0101 0110 0111 1000 1001 1010 1011 1100 1101 1110 1111
2-7
b7- b4
b3-b0
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1011
1010
1100
1101
1110
1111
CGRAM(1)
CGRAM(2)
CGRAM(3)
CGRAM(4)
CGRAM(5)
CGRAM(6)
CGRAM(7)
CGRAM(8)
CGRAM(1)
CGRAM(2)
CGRAM(3)
CGRAM(4)
CGRAM(5)
CGRAM(6)
CGRAM(7)
CGRAM(8)
0000 0001 0010 0011 0100 0101 0110 0111 1000 1001 1010 1011 1100 1101 1110 1111
b7- b4
b3-b0
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1011
1010
1100
1101
1110
1111
CGRAM(1)
CGRAM(2)
CGRAM(3)
CGRAM(4)
CGRAM(5)
CGRAM(6)
CGRAM(7)
CGRAM(8)
CGRAM(1)
CGRAM(2)
CGRAM(3)
CGRAM(4)
CGRAM(5)
CGRAM(6)
CGRAM(7)
CGRAM(8)
0000 0001 0010 0011 0100 0101 0110 0111 1000 1001 1010 1011 1100 1101 1110 1111b7- b4
b3-b0
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1011
1010
1100
1101
1110
1111
CGRAM(1)
CGRAM(2)
CGRAM(3)
CGRAM(4)
CGRAM(5)
CGRAM(6)
CGRAM(7)
CGRAM(8)
CGRAM(1)
CGRAM(2)
CGRAM(3)
CGRAM(4)
CGRAM(5)
CGRAM(6)
CGRAM(7)
CGRAM(8)
0000 0001 0010 0011 0100 0101 0110 0111 1000 1001 1010 1011 1100 1101 1110 1111
LCD TFT Displays
SpecPage
Diagonal Size
(inches)
Newhaven Part Number Touch Panel
Brightness (cd/m2)
Module Size (W x H x T) mm
Interface Operating Temperature
5-13 1.8 NHD-1.8-128160ZF-CTXL# - 120 47 x 34 x 2.6 8-bit Parallel -20oC - +70oC
5-14 2.4 NHD-2.4-240320SF-CTXI#-1 - 350 60.2 x 42.7 x 3.9 8-bit or 16-bit Parallel -20oC - +70oC
5-15 2.4 NHD-2.4-240320SF-CTX#-T1 √ 350 60.2 x 42.7 x 3.9 8-bit or 16-bit Parallel -20oC - +70oC
5-16 2.4 NHD-2.4-240320SF-CTXI#-F1 - 350 60.2 x 42.7 x 3.9 8-bit or 16-bit Parallel -20oC - +70oC
5-17 2.4 NHD-2.4-240320SF-CTX#-FT1 √ 350 60.2 x 42.7 x 3.9 8-bit or 16-bit Parallel -20oC - +70oC
5-18 3.5 NHD-3.5-320240MF-ATXL#-1 - 300 76.9 x 63.8 x 3.3 24-bit RGB -20oC - +70oC
5-19 3.5 NHD-3.5-320240MF-ATXL#-T-1 √ 300 76.9 x 63.8 x 3.3 24-bit RGB -20oC - +70oC
5-20 4.3 NHD-4.3-480272MF-ATXI#-1 - 380 105.5 x 62.7 x 5.4 24-bit RGB -20oC - +70oC
5-21 4.3 NHD-4.3-480272MF-ATXI#-T-1 √ 380 105.5 x 62.7 x 5.4 24-bit RGB -20oC - +70oC
5-22 5.7 NHD-5.7-320240WFB-CTXI#-1 - 250 149.0 x 109.0 x 11.5 8-bit Parallel -20oC - +70oC
5-23 5.7 NHD-5.7-320240WFB-CTXI#-T-1 √ 250 149.0 x 109.0 x 11.5 8-bit Parallel -20oC - +70oC
5-24 5.7 NHD-5.7-320240WFB-ETXI#-1 - 350 149.0 x 109.0 x 11.5 16-bit Parallel -20oC - +70oC
5-25 5.7 NHD-5.7-320240WFB-ETXI#-T-1 √ 350 149.0 x 109.0 x 11.5 16-bit Parallel -20oC - +70oC
5-26 5.7 NHD-5.7-640480WF-CTXL# - 300 125.0 x 98.8 x 8.3 8-bit or 16-bit Parallel -20oC - +70oC
5-27 5.7 NHD-5.7-640480WF-CTXL#-T √ 300 125.0 x 98.8 x 8.3 8-bit or 16-bit Parallel -20oC - +70oC
5-28 7.0 NHD-7.0-800480WF-CTXI# - 350 165.0 x 104.4 x 7.1 8-bit Parallel -20oC - +70oC
5-29 7.0 NHD-7.0-800480WF-CTXI#-T √ 350 165.0 x 104.4 x 7.1 8-bit Parallel -20oC - +70oC
LCD PRODUCT TABLES
Note: See page 3-2 for optional controller boards
Key Features:
- High brightness and contrast- Fast response time- Bright LED backlights- Wide viewing angles- Wide operating temperature- QVGA and VGA- RoHS compliant
2-8
WWW.NEWHAVENDISPLAY.COM
LCD Character Displays
SpecPage
Lines x Characters
Newhaven Part Number
Display Mode/Backlight Options(ending prefixes)
Module Size
(W x H)mm
Character Size
(W x H)mm
Connector Type
Operating Temperature
5-30 1 x 8 NHD-0108BZ RN-YBW (STN+ YG, No BL)
RN-YBW-3V (STN+ YG, No BL, 3Vdd)
RN-GBW (STN+ Gray, No BL)
FSY-YBW-3V (STN+ YG, YG BL, 3V, 3Vdd)
53 x 25 3.4 x 7.1 2x7 Back -20oC - +70oC
5-31 1 x 8 NHD-0108CZ RN-GBW (STN+ Gray, No BL)
RN-GBW-3V (STN+ Gray, No BL, 3Vdd)
FL-GBW (STN+ Gray, YG BL)
FSW-GBW-3V3 (STN+ Gray, White BL, 3V,
69 x 27 4.2 x 7.7 1x10 Left -20oC - +70oC
5-32 1 x 8 NHD-0108HZ FSW-GBW (STN+ Gray, White BL) 60.7 x 33.8 5.0 x 7.0 1x10 Left -20oC - +70oC
5-33 1 x 8 NHD-0108FZ RN-YBW (STN+ YG, No BL)
FL-YBW-3V3 (STN+ YG, YG BL, 3V, 3Vdd)
84 x 44 6.4 x 10.7 1x16 Bottom
-20oC - +70oC
5-34 2 x 8 NHD-0208AZ RN-YBW-3V (STN+ YG, No BL, 3Vdd)
RN-YBW (STN+ YG, No BL)
RN-GBW (STN+ Gray, No BL)
FL-YBW (STN+ YG, YG BL) FL-GBW (STN+ Gray, YG BL)
FSW-GBW-3V3 (STN+ Gray, White BL, 3V,
40 x 35.4 2.9 x 4.7 2 x 8 Top -20oC - +70oC
5-35 2 x 8 NHD-0208BZ RN-YBW (STN+ YG, No BL)
RN-YBW-3V (STN+ YG, No BL, 3Vdd)
RN-GBW (STN+ Gray, No BL)
FL-YBW (STN+ YG, YG BL)
FL-GBW (STN+ Gray, YG BL)
FSW-GBW-3V3 (STN+ Gray, White BL, 3V,
58 x 32 2.9 x 5.5 2 x 7 Left -20oC - +70oC
5-36 1 x 12 NHD-0112BZ FL-YBW (STN+ YG, YG BL) 69 x 27 2.6 x 5.5 1 x 10 Left -20oC - +70oC
5-37 2 x 12 NHD-0212WH-A YYH-JT# (STN+ YG, YG BL)
YGH-JT# (STN+ Gray, YG BL)
TGH-JT# (STN+ Gray, White BL)
TMI-JT# (STN- Blue, White BL)
55.7 x 32 2.7 x 6.3 1 x 15 Bottom
-20oC - +70oC
5-38 1 x 16 NHD-0116AZ RN-GBW (STN+ Gray, No BL)
FL-YBW (STN+ YG, YG BL)
FL-GBW (STN+ Gray, YG BL)
80 x 36 3.0 x 6.5 1 x 16 Top -20oC - +70oC
5-39 1 x 16 NHD-0116DZ FL-YBW (STN+ YG, YG BL)
FL-YBW-3V (STN+ YG, YG BL, 3V, 3Vdd)
FL-GBW (STN+ Gray, YG BL)
NSW-BBW (STN- Blue, White BL)
122 x 33 4.8 x 9.6 1 x 16 Top -20oC - +70oC
LCD PRODUCT TABLES
Key Features:
- 8 different backlight color options- Low power backlight- Various font tables available- Positive and negative image options
- Industry standard sizes- Wide operating temperature- RoHS compliant
2-9
3Vdd)
3Vdd)
3Vdd)
SpecPage
Lines x Characters
Newhaven Part Number
Display Mode/Backlight Options(ending prefixes)
Module Size
(W x H)mm
Character Size
(W x H)mm
Connector Type
Operating Temperature
5-40 1 x 16 NHD-0116GZ FL-YBW (STN+ YG, YG BL)
FL-GBW (STN+ Gray, YG BL)
FSB-GBW (STN+ Gray, Blue BL)
FSW-GBW (STN+ Gray, White BL)
NSW-BBW (STN- Blue, White BL)
FSPG-FBW (FSTN+ PureGreen BL)
FSB-FBW (FSTN+ Blue BL)
FSO-FBW (FSTN+ Orange BL)
FSA-FBW (FSTN+ Amber BL)
FSR-FBW (FSTN+ Red BL)
FSW-FBW (FSTN+ White BL)
151 x 40 6.0 x 14.5 2 x 8 Left -20oC - +70oC
5-41 2 x 16 NHD-02161Z FSY-YBW-C (STN+ YG, YG BL, w/ Flex Cable) 53 x 20 1.8 x 3.2 1 x 16 Bottom FFC
-20oC - +70oC
5-42 2 x 16 NHD-0216HZ FL-YBW-C (STN+ YG, YG BL, Temp Comp)
FSW-FBW-3V3C (FSTN+ White BL, 3V, 3Vdd, Temp Comp)
65.5 x 36.7 2.5 x 4.9 1 x 16 Bottom -20oC - +70oC
5-43 2 x 16 NHD-0216CZ FL-YBW (STN+ YG, YG BL) 66.7 x 23.3 2.9 x 5.5 Flex Cable -20oC - +70oC
5-44 2 x 16 NHD-0216T2Z FSY-YBW-P (STN+ YG, YG BL, w/ Pin Header) 74.5 x 30.7 2.9 x 5.2 1 x 16 Bottom -20oC - +70oC
5-45 2 x 16 NHD-0216PZ FL-YBW (STN+ YG, YG BL)
FL-YBW-PC (STN+ YG, YG BL, reversed
80 x 36 2.9 x 4.3 1 x 16 Bottom -20oC - +70oC
5-46 2 x 16 NHD-0216XZ FSW-GBW (STN+ Gray, White BL) 80 x 36 3.0 x 5.2 1 x 16 Top -20oC - +70oC
5-475-48
2 x 16 NHD-0216K1Z FL-YBW (STN+ YG, YG BL)
FL-GBW (STN+ Gray, YG BL)
FSPG-GBW-L (STN+ Gray, PureGreen BL,
FSB-GBW-L (STN+ Gray, Blue BL, 20mA)
FSO-GBW-L (STN+ Gray, Orange BL, 20mA)
FSA-GBW-L (STN+ Gray, Amber BL, 20mA)
FSR-GBW-L (STN+ Gray, Red BL, 20mA)
FSW-GBW-L (STN+ Gray, White BL, 20mA)
NSW-BBW-L (STN- Blue, White BL, 20mA)
FSPG-FBW-L (FSTN+ PureGreen BL, 20mA)
FSB-FBW-L (FSTN+ Blue BL, 20mA)
FSO-FBW-L (FSTN+ Orange BL, 20mA)
FSA-FBW-L (FSTN+ Amber BL, 20mA)
FSR-FBW-L (FSTN+ Red BL, 20mA)
FSW-FBW-L (FSTN+ White BL, 20mA)
FSW-FTW-FBI (FSTN+ White BL, 20mA,
Fixed Contrast, 12:00 View)
NSPG-FBW-L (FSTN- Pure Green BL, 20mA)
NSB-FBW-L (FSTN- Blue BL, 20mA)
NSO-FBW-L (FSTN- Orange BL, 20mA)
NSA-FBW-L (FSTN- Amber BL, 20mA)
NSR-FBW-L (FSTN- Red BL, 20mA)
NSW-FBW-L (FSTN- White BL, 20mA)
FS(RGB)-FBW-Rev1 (FSTN+ RGB BL)
NS(RGB)-FBW-Rev1 (FSTN- RGB BL)
80 x 36 3.0 x 5.2 1 x 16 Top/Bottom
-20oC - +70oC
pins,ESD)
20mA)
LCD Character Displays (Continued)
LCD PRODUCT TABLES
2-10
WWW.NEWHAVENDISPLAY.COM
SpecPage
Lines x Characters
Newhaven Part Number
Display Mode/Backlight Options(ending prefixes)
Module Size
(W x H)mm
Character Size
(W x H)mm
Connector Type
Operating Temperature
5-49 2 x 16 NHD-0216BZ RN-YBW (STN+ YG, No BL)
RN-GBW (STN+ Gray, No BL)
FL-YBW (STN+ YG, YG BL)
84 x 44 3.0 x 5.2 1 x 16
Bottom-20oC - +70oC
5-50 2 x 16 NHD-0216EZ FL-YBW (STN+ YG, YG BL)
FL-GBW (STN+ Gray, YG BL)
85 x 5.2 3.0 x 5.3 2 x 8 Left -20oC - +70oC
5-51 2 x 16 NHD-0216SZ FL-YBW (STN+ YG, YG BL)
FL-GBW (STN+ Gray, YG BL)
FSW-GBW (STN+ Gray, White BL)
NSW-BBW (STN- Blue, White BL)
NSW-BBW-3V3 (STN- Blue,White BL, 3V,
FSW-FBW (FSTN+ White BL)
122 x 44 5.2 x 9.5 1 x 16
Bottom-20oC - +70oC
5-52 4 x 16 NHD-0416BZ FL-YBW (STN+ YG, YG BL)
FL-GBW (STN+ Gray, YG BL)
NSW-BBW (STN- Blue, White BL)
87 x 60 2.9 x 4.7 1 x 16 Top -20oC - +70oC
5-53 4 x 16 NHD-0416B1Z FSPG-YBW-L-3V (STN+ YG, PureGreen BL, 20mA, 3V, 3Vdd)
87 x 60 2.9 x 4.7 1 x 16 Top -20oC - +70oC
5-54 2 x 20 NHD-0220FZ FSW-GBW-3V3 (STN+ Gray, White BL,
FSW-GBW-P (STN+ Gray, White BL, w/ Pin
65 x 20 1.8 x 3.2 2 x 8 Left -20oC - +70oC
5-55 2 x 20 NHD-0220GZ FL-YBW (STN+ YG, YG BL)
FL-GBW (STN+ Gray, YG BL)
FSW-GBW-L (STN+ Gray, White BL, 20mA)
FSW-GBW-LE-E (STN+ Gray, White BL, 20mA, Euro font)
80 x 36 2.4 x 4.6 1 x 16 Top -20oC - +70oC
5-56 2 x 20 NHD-0220DZ FL-YBW (STN+ YG, YG BL)
FL-GBW (STN+ Gray, YG BL)
FSW-GBW (STN+ Gray, White BL)
NSW-BBW (STN- Blue, White BL)
FSW-FBW (FSTN+ White BL)
116 x 37 3.2 x 5.5 1 x 16 Top -20oC - +70oC
5-57 2 x 20 NHD-0220AZ FL-YBW (STN+ YG, YG BL) 146 x 43 4.8 x 9.2 1 x 16 Top -20oC - +70oC
5-58 2 x 20 NHD-0220WH-M YGH-JT# (STN+ Gray, YG BL)
TGH-JT# (STN+ Gray, White BL)
TFH-JT#E (FSTN+ White BL)
146 x 43 4.8 x 9.2 1 x 16 Top -20oC - +70oC
5-59 2 x 20 NHD-0220WH-L YYH-JT# (STN+ YG, YG BL)
TGH-JT# (STN+ Gray, White BL)
180 x 40 6.0 x 9.6 2 x 8 Left -20oC - +70oC
5-60 2 x 20 NHD-0220JZ FL-GBW (STN+ Gray, YG BL)
FSW-GBW (STN+ Gray, White BL)
FSW-FBW (FSTN+ White BL)
182 x 60 6.0 x 12.0 1 x 16 Left -20oC - +70oC
5-61 4 x 20 NHD-0420H1Z FL-GBW-3V3 (STN+ Gray, YG BL, 3V, 3Vdd)
FSW-GBW-3V3 (STN+ Gray, White BL,
FSW-GBW (STN+ Gray, White BL)
66 x 36 2.3 x 5.1 1 x 16 Back -20oC - +70oC
5-62 4 x 20 NHD-0420AZ FL-YBW-3V3 (STN+ YG, YG BL, 3V,3Vdd)
FL-GBW-3V3 (STN+ Gray, YG BL, 3V,3Vdd)
FSW-GBW-3V3 (STN+ Gray, White BL,
77 x 47 2.3 x 4.0 1 x 16 Top -20oC - +70oC
3Vdd)
3V,3Vdd)
3V,3Vdd)
3V,3Vdd)
LCD Character Displays (Continued)
LCD PRODUCT TABLES
Header)
2-11
Spec Page
Lines x Characters
Newhaven Part Number
Display Mode/Backlight Options(ending prefixes)
Module Size
(W x H)mm
Character Size
(W x H)mm
Connector Type
Operating Temperature
5-63 4 x 20 NHD-0420DZ FL-YBW (STN+ YG, YG BL)
FL-YBW-3V3 (STN+ YG, YG BL, 3V, 3Vdd)
NSW-BBW (STN- Blue, White BL)
FSW-FBW (FSTN+ White BL)
98 x 60 2.9 x 4.7 1 x 16 Top -20oC - +70oC
5-64 4 x 20 NHD-0420E2Z FL-YBW (STN+ YG, YG BL)
FL-GBW (STN+ Gray, YG BL)
FSW-GBW (STN+ Gray, White BL)
NSW-BBW (STN- Blue, White BL)
146 x 62 4.8 x 9.2 1 x 16 Top -20oC - +70oC
5-65 2 x 24 NHD-0224BZ FL-YBW (STN+ YG, YG BL)
FSW-GBW (STN+ Gray, White BL)
116 x 37 2.7 x 5.5 2 x 8 Left -20oC - +70oC
5-66 2 x 24 NHD-0224BZ1 FSW-FBW (FSTN+ White BL) 116 x 37 2.7 x 5.5 2 x 8 Left -20oC - +70oC
5-67 2 x 24 NHD-0224AZ FSW-GBW (STN+ Gray, White BL) 118 x 36 3.2 x 5.5 2 x 8 Left -20oC - +70oC
5-68 2 x 24 NHD-0224WH-A TDI-JT# (DFSTN- White BL) 118 x 36 3.2 x 5.5 2 x 8 Left -20oC - +70oC
5-69 2 x 40 NHD-0240AZ FL-GBW (STN+ Gray, YG BL) 182 x 33 3.2 x 5.5 2 x 8 Left -20oC - +70oC
5-70 4 x 40 NHD-0440AZ RN-FBW (FSTN+ No BL)
FL-YBW (STN+ YG, YG BL)
190 x 54 2.7 x 4.8 2 x 8 Left -20oC - +70oC
5-71 4 x 40 NHD-0440WH-A TMI-JT# (STN- Blue, White BL)
TFH-JT# (FSTN+ White BL)
190 x 54 2.7 x 4.8 2 x 8 Left -20oC - +70oC
LCD Character Displays (Continued)
LCD PRODUCT TABLES
2-12
WWW.NEWHAVENDISPLAY.COM
LCD Serial Displays
SpecPage
Lines x Characters
Newhaven Part Number
Display Mode/Backlight Options(ending prefixes)
Module Size (W x H) mm
Character Size
(W x H) mm
Interface Operating Temperature
5-72 2 x 16 NHD-0216K3Z FL-GBW (STN+ Gray, YG BL)
NSW-BBW (STN- Blue, White BL)
FS(RGB)-FBW (FSTN+ RGB BL)
NS(RGB)-FBW (FSTN- RGB BL)
80.0 x 36.0 3.0 x 5.23 I2C, RS232, SPI -20oC - +70oC
5-73 2 x 16 NHD-0216B3Z FL-GBW (STN+ Gray, YG BL) 84.4 x 44.0 3.0 x 5.23 I2C, RS232, SPI -20oC - +70oC
5-74 2 x 16 NHD-0216S3Z FL-GBW (STN+ Gray, YG BL) 122.0 x 44.0 5.2 x 9.55 I2C, RS232, SPI -20oC - +70oC
5-75 2 x 20 NHD-0220D3Z FL-GBW (STN+ Gray, YG BL)
NSW-BBW (STN- Blue, White BL)
116.0 x 37.0 3.2 x 5.55 I2C, RS232, SPI -20oC - +70oC
5-76 2 x 40 NHD-0240BZ NSW-BTW-P (STN- Blue, White BL, 5 Button 210.0 x 22.0 3.2 x 5.55 RS232 -20oC - +70oC
5-77 4 x 20 NHD-0420D3Z FL-GBW (STN+ Gray, YG BL)
NSW-BBW (STN- Blue, White BL)
98.0 x 60.0 2.95 x 4.75 I2C, RS232, SPI -20oC - +70oC
LCD PRODUCT TABLES
Key Features:
- I2C, SPI and RS232 serial interfaces- Save development time and I/O lines- Simple hardware interfacing- Software controlled contrast and backlight brightness
- Standard LCD commands and fonts- No extra boards or logic required- Standard LCD sizes- Custom development available- RoHS compliant
2-13
Keypad)
LCD COG Displays
Spec Page
Lines x Characters
Newhaven Part Number
Display Mode/Backlight Options(ending prefixes)
Module Size (W x H x T) mm
Interface Driver Operating Temperature
5-78 2 x 16 NHD-C0216CZ NSW-BBW-3V3 (STN- Blue, White BL, 3Vdd, 3V)
FSW-FBW-3V3 (FSTN+ White BL, 3Vdd, 3V)
41.4 x 24.3 x 4.0 SPI ST7032 -20oC - +70oC
5-79 2 x 16 NHD-C0216AZ FN-GBW (STN+Gray, No BL)
FSW-GBW (STN+Gray, White BL)
49.7 x 25.3 x 2.1 Parallel NT7605 -20oC - +70oC
5-80 2 x 16 NHD-C0216CU FN-GBW-3V (STN+Gray, No BL, 3Vdd)
FSW-GBW-3V3 (STN+Gray, White BL, 3Vdd,
49.7 x 25.3 x 2.056.0 x 25.3 x 5.5
Parallel ST7032 -20oC - +70oC
5-81 2 x 16 NHD-C0216CiZ FSW-FBW (FSTN+ White BL) 56.0 x 25.3 x 5.5 I2C ST7032i-OD -20oC - +70oC
5-82 2 x 20 NHD-C0220AA FSW-FTW (FSTN+ White BL, 3V, 12:00 view) 74.5 x 25.0 x 6.2 Parallel NT7605 -20oC - +70oC
5-83 2 x 20 NHD-C0220AZ FSW-FTW (FSTN+ White BL, 5V, 12:00 view) 74.5 x 25.0 x 6.2 Parallel NT7605 -20oC - +70oC
5-84 2 x 20 NHD-C0220BiZ FSW-FBW-3V3-M (FSTN+ White BL, 3Vdd, 3V,
w/ Mounting tabs)
FS(RGB)-FBW-3VM (FSTN+ RGB BL, 3Vdd,
w/ Mounting tabs)
75.7 x 25.0 x 6.2
75.7 x 39.1 x 6.2
I2C ST7036 -20oC - +70oC
5-85 128 x 32 NHD-C12832A1Z NSW-BBW-3V3 (STN- Blue, White BL, 3Vdd, 3V)
FSR-FBW-3V3 (FSTN+ Red BL, 3Vdd, 3V)
FSB-FBW-3V3 (FSTN+ Blue BL, 3Vdd, 3V)
FSW-FBW-3V3 (FSTN+ White BL, 3Vdd, 3V)
41.4 x 24.3 x 4.0 SPI ST7565R -20oC - +70oC
5-86 128 x 64 NHD-C12864HZ FN-FBW (FSTN+ No BL) 38.3 x 33.0 x 2.0 Parallel TL0324S -20oC - +70oC
5-87 128 x 64 NHD-C12864B2Z RN-FBW (FSTN+ No BL) 48.0 x 36.0 x 2.0 Parallel ST7565R -20oC - +70oC
5-88 128 x 64 NHD-C12864GG RN-GBW (STN+ Gray, No BL) 55.5 x 38.0 x 2.0 Serial/Parallel ST7565P -20oC - +70oC
5-89 128 x 64 NHD-C12864WC FSW-FBW-3V3 (FSTN+ White BL, 3Vdd, 3V)
FSW-FBW-3V3-M (FSTN+ White BL, 3Vdd, 3V
w/ Mounting tabs)
62.0 x 40.0 x 5.786.0 x 40.0 x 5.7
Serial/Parallel ST7565R -20oC - +70oC
5-90 128 x 64 NHD-C12864LZ FSW-FBW-3V3 (FSTN+ White BL, 3V, 3Vdd) 77.4 x 52.4 x 6.5 Serial/Parallel ST7565RG -20oC - +70oC
5-91 128 x 64 NHD-C12864M1Z FSW-FTW-3V6 (FSTN+ White BL, 6.4V, 3Vdd) 69.9 x 42.9 x 5.8 Serial/Parallel ST7565R -20oC - +70oC
5-92 128 x 64 NHD-C12864CR FSW-GBW (STN+Gray, White BL) 71.3 x 54.9 x 5.9 Serial/Parallel ST7565 -20oC - +70oC
5-93 128 x 64 NHD-C12864AZ FSY-YBW-HT (STN+YG, YG BL, w/ Heater) 80.0 x 54.0 x 10.2 Serial/Parallel ST7565V -40oC - +70oC
LCD PRODUCT TABLES
Key Features:
- Monochrome character or graphic icons- Low power consumption- Custom LED backlights available- Wide operating temperature- RoHS compliant
2-14
3.2V)
WWW.NEWHAVENDISPLAY.COM
LCD PRODUCT TABLES
Spec Page
Lines x Characters
Newhaven Part Number
Display Mode/Backlight Options(ending prefixes)
Module Size (W x H x T) mm
Interface Driver Operating Temperature
5-945-95
128 x 64 NHD-C12864A1Z FSW-FBW-HTT (FSTN+ White BL, w/ Heater)
FSR-FBW-HTT (FSTN+ Red BL, w/ Heater)
FSB-FBW-HTT (FSTN+ Blue BL, w/ Heater)
FS(RGB)-FBW-HTT (FSTN+ RGB BL, w/
80.0 x 54.0 x 10.2 SPI ST7565V -40oC - +70oC
5-96 128 x 64 NHD-C12864WO B1TMI#-M (STN- Blue, White BL, w/ mounting
B1TFH#-M (FSTN+ White BL, w/ mounting tabs)
B1TT1#-M (FSTN- White BL, w/ mounting tabs)
89.7 x 49.8 x 6.0 Serial/Parallel ST7565P-G -20oC - +70oC
5-97 128 x 65 NHD-C12865AZ FSW-GBW (STN+ Gray, White BL) 57.0 x 39.4 x 2.0 Serial/Parallel ST7565 -20oC - +70oC
5-98 128 x 65 NHD-C12865BZ FSW-GBW (STN+ Gray, White BL) 66.3 x 49.8 x 5.9 Serial/Parallel ST7565 -20oC - +70oC
5-99 128 x 128 NHD-C128128BZ FSW-GBW (STN+ Gray, White BL) 71.3 x 75.4 x 6.0 Serial/Parallel ST7528 -20oC - +70oC
5-100 160 x 100 NHD-C160100AZ RN-GBW (STN+ Gray, No BL) 41.5 x 36.0 x 2.1 Serial/Parallel ST7528 -20oC - +70oC
5-101 160 x 100 NHD-C160100CZ RN-FBW (FSTN+ No BL) 51.5 x 39.7 x 2.1 Serial/Parallel ST7528 -20oC - +70oC
5-102 160 x 100 NHD-C160100DiZ FSW-FBW (FSTN+ White BL) 50.0 x 45.0 x 4.0 I2C ST7528i -20oC - +70oC
5-103 240 x 64 NHD-C24064WO ATFH#-3V3 (FSTN+ White BL, 3.5V, 3Vdd) 142.5 x 51.7 x 14.9 Parallel ST7565S(2) -20oC - +70oC
LCD COG Displays (Continued)
2-15
Heater)
tabs)
LCD Graphic Displays
Spec Page
Lines x Characters
Newhaven Part Number
Display Mode/Backlight Options
(ending prefixes)
Module Size (W x H)
mm
Viewing Area
(W x H) mm
Controller Operating Temperature
5-104 100 x 32 NHD-10032AZ FSPG-YBW (STN+ YG, PureGreen
FSPG-GBW (STN+ Gray,
65.0 x 28.4 46.0 x 18.4 SED1520 -20oC - +70oC
5-105 120 x 32 NHD-12032B1Z FSW-GBW (STN+ Gray, White BL) 68.1 x 32.9 62.0 x 22.5 SED1520 -20oC - +70oC
5-106 122 x 32 NHD-12232KZ NSW-BBW-P (STN- Blue, White BL, w/ pin header)
83.5 x 27.5 60.5 x 18.5 SBN1661G_M02 -20oC - +70oC
5-107 122 x 32 NHD-12232AZ FL-YBW (STN+ YG, YG BL)
FSW-GBW (STN+ Gray, White BL)
84.0 x 44.0 64.0 x 17.9 SBN1661G_M02 -20oC - +70oC
5-108 128 x 64 NHD-12864WX-T1 TFH# (FSTN+ White BL) 38.0 x 24.2 29.6 x 17.9 NT7534H -20oC - +70oC
5-109 128 x 64 NHD-12864MZ FSW-GBW-L (STN+ Gray,White BL, 20mA)
63.2 x 52.2 54.0 x 36.0 KS0108 -20oC - +70oC
LCD PRODUCT TABLES
Key Features:
- 8 different backlight color options- Low power backlight- Optional touch panels available- Positive and negative image options- Industry standard sizes- Wide operating temperature- RoHS compliant
2-16
PureGreen BL)
BL)
WWW.NEWHAVENDISPLAY.COM
LCD Graphic Displays (Continued)
SpecPage
Lines x Characters
Newhaven Part Number
Display Mode/Backlight Options(ending prefixes)
Module Size (W x H)
mm
Viewing Area
(W x H) mm
Controller Operating Temperature
5-110 128 x 64 NHD-12864WG-B TGH-T#N (STN+ Gray, White BL w/ Temp
Comp)
TMI-V#N (STN- Blue, White BL)
TFH-V#N (FSTN+ White BL)
75.0 x 52.7 60.0 x 32.6 KS0108 -20oC - +70oC
5-111 128 x 64 NHD-12864WG-C TFH-V#N (FSTN+ White BL) 78.0 x 70.0 62.0 x 44.0 KS0108 -20oC - +70oC
5-112 128 x 64 NHD-12864WG-F TGH-VZ# (STN+ Gray, White BL)
TMI-VZ# (STN- Blue, White BL)
TTI-VZ#000 (FSTN- White BL)
TFH-VZ# (FSTN+ White BL)
87.0 x 70.0 72.0 x 40.0 RA6963 -20oC - +70oC
5-113 128 x 64 NHD-12864AZ FL-YBW (STN+ YG, YG BL)
FL-GBW (STN+ Gray, YG BL)
FSW-GBW-VZ (STN+ Gray, White BL,
FSW-FBW (FSTN+ White BL)
NSW-BBW-TR (STN- Blue, White BL, w/
93.0 x 70.0 72.0 x 40.0 KS0108 -20oC - +70oC
5-114 144 x 32 NHD-14432WG-A TFH-V#T (FSTN+ White BL) 85.0 x 36.0 66.0 x 16.0 ST7920 -20oC - +70oC
5-115 144 x 32 NHD-14432WG-B TFH-V#T (FSTN+ White BL) 80.0 x 36.0 66.0 x 16.0 ST7920 -20oC - +70oC
5-116 160 x 32 NHD-16032AZ FL-YBW (STN+ YG, YG BL) 114.0 x 44.0 99.0 x 22.0 ST7920-OB -20oC - +70oC
5-117 160 x 32 NHD-16032BZ FL-YBW (STN+ YG, YG BL)
FSW-GBW (STN+ Gray, White BL)
122.0 x 44.0 99.0 x 24.0 ST7920-OB -20oC - +70oC
5-118 160 x 128 NHD-160128WG-B TGH-VZ#-1 (STN+ Gray, White BL)
TMI-VZ#-1 (STN- Blue, White BL)
129.0 x 102.0 101.0 x 82.0 RA6963 -20oC - +70oC
5-119 192 x 32 NHD-19232WG-B GGH-V#T (STN+ Gray, Green BL)
TMI-V#T (STN- Blue, White BL)
116.0 x 37.0 84.0 x 18.6 ST7920 -20oC - +70oC
5-120 240 x 64 NHD-24064CZ FSW-GBW (STN+ Gray, White BL)
NSW-BBW (STN- Blue, White BL)
FSW-FBW (FSTN+ White BL)
118.0 x 45.0 96.0 x 30.0 RA6963 -20oC - +70oC
5-121 240 x 64 NHD-24064WG-A YYH-VZ# (STN+ YG, YG BL)
TGH-VZ# (STN+ Gray, White BL)
TMI-VZ# (STN- Blue, White BL)
TFH-VZ# (FSTN+ White BL)
180.0 x 65.0 133.0 x 39.0 RA6963 -20oC - +70oC
LCD PRODUCT TABLES
w/ Neg V)
Auto Contrast)
2-17
LCD Graphic Displays (Continued)
SpecPage
Lines x Characters
Newhaven Part Number
Display Mode/Backlight Options(ending prefixes)
Module Size (W x H) mm
Viewing Area
(W x H) mm
Controller Operating Temperature
5-122 240 x 128 NHD-240128BZ NSW-BTW (STN- Blue, White BL) 93.0 x 65.0 72.0 x 40.0 RA8835 -20oC - +70oC
5-123 240 x 128 NHD-240128WG-B TMI-VZ# (STN- Blue, White BL)
TML-VZ# (STN- Blue, White BL 12:00 View)
TFH-VZ# (FSTN+ White BL)
144.0 x 104.0 144.0 x 64.0 RA6963 -20oC - +70oC
5-124 240 x 128 NHD-240128WG-A FTI-VZ#C5 (FSTN- CCFL BL, 5-pin conn.)
TMI-VZ# (STN- Blue, White BL)
TFH-VZ# (FSTN+ White BL)
170.0 x 103.5 129.0 x 75.0 RA6963 -20oC - +70oC
5-125 320 x 240 NHD-320240WX-Co TFH-V#I040 (FSTN+ White BL)
TFH-V#I041 (FSTN+ White BL w/Mounting
Tabs)
94.7 x 83.3 81.4 x 51.0 RA8835 -20oC - +70oC
5-126 320 x 240 NHD-320240WG-Co TFH-VZ# (FSTN+ White BL) 154.7 x 120.0 120.1 x 92.1 RA8835 -20oC - +70oC
5-127 320 x 240 NHD-320240WG-A TMI-VZ# (STN- Blue, White BL) 165.0 x 109.0 122.0 x 92.0 None -20oC - +70oC
5-128 320 x 240 NHD-320240WG-Bx TGH-VZ#3VR (STN+ Gray, White,3V)
TFH-VZ# (FSTN+White BL)
166.8 x 109.0 122.0 x 92.0 RA8835 -20oC - +70oC
5-129 320 x 240 NHD-320240WG-Bo TML-VZ#030 (STN- Blue, White BL, 12:00
View)
TMI-VZ# (STN- Blue, White BL)
TFH-VZ# (FSTN+ White BL)
166.8 x 109.0 122.0 x 92.0 RA8835 -20oC - +70oC
LCD PRODUCT TABLES
2-18
WWW.NEWHAVENDISPLAY.COM
LCD DEVELOPMENT TOOLS
The NHDev Board is the ideal tool for prototyping and evaluating Newhaven Display’s OLEDs, COG, TFT, Character and Graphic LCD Displays. This STM32F based device comes preprogrammed to demonstrate each display with preloaded images and text files from the included SD card. These files can also be easily edited or replaced with user created images allowing you to see what your actual application will look like.
The NHDev Board’s easy-to-use functionality allows for quick time to market while keeping your development costs low. The design of the board has selection features making it easy for the user to plug in any display and with a push of a button have it up and running in minutes versus days. The NHDev Board now gives you the freedom to pick and choose several displays instead of just one when prototyping your product.
Features:
• One board to evaluate several displays• Sample codes and wiring diagrams provided• CPU: STM32F103RET6 ARM 32 bit Cortex-M3• PCB dimensions: 100 x 95mm• SD Card storage with preloaded images and text files• Variable resistor to adjust contrast• Jumper to select input to V0 potentiometer, either VSS or VEE (external voltage)
• 3 push button user interface• Backlight enable switch• MPU reset switch• JTAG connection with ARM2x10 pin layout for programming• 2.54mm (0.1”) pitch LCD development output pins and thru-holes• NHD-C0216CZ-FSW-FBW display.• 7VDC power supply, jumper to select +5V, 3.3V LCD power supply
Breakdown of the NHDev LCD Development Board
Supported Displays
OLED Characters NHD-0216KZW seriesNHD-0216SZW series
OLED Graphics NHD-2.23-12832UC seriesNHD-2.7-12864UC series
TFT Displays
* : requires controller board
NHD-1.8-128160ZF-CTXL#NHD-2.4-240320SF-CTXI#NHD-3.5-320240MF-ATXL#-1 *NHD-4.3-480272MF-ATXI#-1 *
Character Modules NHD-0108 modelsNHD-0112 modelsNHD-0116 modelsNHD-0208 modelsNHD-0212 modelsNHD-0216 models
Graphic Modules NHD-12232AZ seriesNHD-12232LZ seriesNHD-12864WX seriesNHD-12864MZ seriesNHD-12864AZ seriesNHD-14432WG seriesNHD-16032AZ seriesNHD-16032BZ series
Chip-on-Glass Displays NHD-C0220A seriesNHD-C12832A1Z seriesNHD-C12864HZ seriesNHD-C12864B2Z seriesNHD-C12864GG seriesNHD-C12864WM series
NHD-0220 modelsNHD-0224 modelsNHD-0240 modelsNHD-0416 modelsNHD-0420 modelsNHD-0440 models
NHD-160128WG seriesNHD-19232WG seriesNHD-24064CZ seriesNHD-24064WG seriesNHD-240128WG-B seriesNHD-240128WG-A seriesNHD-320240WG-B seriesNHD-320240WG-C series
NHD-5.7-320240WFB-CTXI#-1NHD-5.7-640480WF-CTXL#NHD-7.0-800480WF-CTXI#
NHD-C12864M seriesNHD-C12864CZ seriesNHD-C12864AZ seriesNHD-C12864EZ seriesNHD-C128128BZ seriesNHD-C160100AZ seriesNHD-C160100CZ series
NHD-0220DZW seriesNHD-0420DZW series
NHD-2.8-25664UC seriesNHD-3.12-25664UC series
3-1
LCD DEVELOPMENT TOOLS
LCDController Boards
The LCD Controller boards provide the user with the ability to use an 8-bit or 16-bit parallel processor input instead of the standard 24-bit RGB input. When the processor being used doesn’t have a built-in controller to run the driver on the TFT, these boards offer a simple solution that’s quick and easy to use. Listed below are the controller boards that can be used to connect to our 3.5”, 4.3”, 5.0” and 6.0” TFT displays.
Newhaven Part Number Description Module Size (W x H) mm
Controller Voltage
NHD-3.5-320240MF-VIDEO Video Input Board with OSD brightness control keypad 74 x 55 TW8817 +12V
NHD-3.5-320240MF-20 8-bit parallel input 78 x 65 SSD1963 +3.3V
NHD-3.5-320240MF-22 8-bit parallel input with touch panel input 78 x 65 SSD1963 +3.3V
NHD-3.5-320240MF-34 16-bit parallel input with touch panel input 78 x 65 SSD1963 +3.3V
NHD-4.3-480272MF-20 8-bit parallel input 105.5 x 40 SSD1963 +3.3V
NHD-4.3-480272MF-22 8-bit parallel input with touch panel input 105.5 x 40 SSD1963 +3.3V
NHD-4.3-480272MF-34 16-bit parallel input with touch panel input 105.5 x 40 SSD1963 +3.3V
NHD-5.0-800480MF-20 8-bit parallel input 105.5 x 40 SSD1963 +3.3V
NHD-5.0-800480MF-22 8-bit parallel input with touch panel input 105.5 x 40 SSD1963 +3.3V
NHD-5.0-800480MF-34 16-bit parallel input with touch panel input 105.5 x 40 SSD1963 +3.3V
NHD-6.0-800480MF-20 8-bit parallel input 105.5 x 40 SSD1963 +3.3V
NHD-6.0-800480MF-22 8-bit parallel input with touch panel input 105.5 x 40 SSD1963 +3.3V
NHD-6.0-800480MF-34 16-bit parallel input with touch panel input 105.5 x 40 SSD1963 +3.3V
3-2
VFD DISPLAY - VFD Classifications
7-Segmented GlassSeven segmented glass VFD displays are used primarily to display numerical information. Typical applications are clocks, industrial instrumentations, counters, scales, calculators and registers.
Custom VFD GlassNewhaven Display offers custom glass VFDs allowing you to make your product stand out from your competition. These are perfect for virtually any application.
Dot Matrix GlassDot matrix glass VFD displays are typically used to display upper and lower case text, numerical information and limited symbols. Typical applications are measurement, scales, medical, vending machines, point-of-sales registers and industrial instrumentations.
Alphanumeric GlassAlphanumeric glass VFD displays are used to display upper and lower case text and numerical instrumentation. Typical applications are scales, test and measurement, vending machines and gaming machines.
Character ModuleThe character module VFD is featured in alphanumeric and dot matrix and incorporates all the necessary hardware for easy connection. Typical applications are test and measurement, scales, medical and gaming machines.
VFD Filtering Capabilities
Color filters can be applied to any VFD to change the overall look of the display. These filters can alter the color of the VFD and increase the contrast ratio, as well as act as a protective shield.
Some colors available include: - Red - Rose - Blue - Violet - Green
VFD Color Filters
VFD Classifications
4-2
WWW.NEWHAVENDISPLAY.COM
FilamentThe Filament is the cathode of VFD. It consists of a very thin tungsten wire coated with barium, strontium and calcium oxides. Application of a specified voltage raises the temperature of the filament, which causes thermionic emission.
ITO Contact LeadThe ITO Contact Lead lets the inside transparent conductive layer of Front Glass connect to filament voltage to prevent ESP effect.
Anode ElectrodeThe Anode Electrode generally consists of graphic coated with phosphors. Both the graphic and phosphors are conductors.
Insulation LayerThe Insulation Layer electrically insulates the anode/grid electrode from wiring pattern.
Wiring PatternThe Wiring Pattern connects anode/grid electrode to the metal leads.
GridThe Grid controls the flow of the electrons by applying positive or negative voltage.
Glass SubstrateThe Glass Substrate is used to form the wiring pattern and other patterns.
Leads GetterThe Leads Getter is important in maintaining a high vacuum level in the inside of VFD after the exhausting process.
Exhaust TipThe Exhaust Tip is used to remove the gasses from inside of the VFD during the production process.
Front GlassThe Front Glass is used together with a glass substrate to form a vacuum sealed package.
Frit GlassThe Frit Glass will melt after heated to fix and seal the front glass and glass substrate together.
PhosphorsCollided by the electrons emitted by the filament, the phosphor is excited and emits light.
Through HoleThe Through Hole is formed on the insulating layer connecting the anode electrode to the wiring pattern.
Transparent Conductive LayerThe Transparent Conductive Layer is formed on the inside of the front glass. It protects the display from external electrostatic effects.
TerminologyBelow are key words to help identify with some of the commonly used terms within the VFD Industry.
VFD DISPLAY - VFD Terminology
VFD Structure
VFD Principle
Cathode- The Cathode (Filament) is the barium oxide coated tungsten wire which is heated by the external power source to approximately 600oC and emits free thermal electrons.
The Grid- The Grid is a metal mesh over the phosphor coated anodes and controls the electrons emitted from the cathode.
Electrons- In the case of non-light emission, electrons from the cathode pass through the grid mesh with the negative potential applied. When the anodes are supplied with positive potential, electrons that pass through the grid mesh hit the anodes. Phosphor, on the anode, excited by the electrons, emits luminous radiation.
4-3
VFD PRODUCT TABLES
VFD Glass Displays
7-Segmented
Spec Info
Lines x Characters
Glass Size (L x W x T) mm
Character Size(W x H) mm
Character Type Newhaven Part Number
Call 1 x 20 115.7 x 20.5 x 6.1 3.4 x 4.9 Dot Matrix D0120SD-20-2004F
Call 2 x 20 125.0 x 35.0 x 7.8 3.5 x 5.0 Dot Matrix D0220SD-35-4002FN
Call 2 x 20 175.0 x 48.3 x 10.5 5.5 x 10.5 Dot Matrix D0220MD-48-4001F
Call 2 x 20 225.0 x 48.3 x 11.5 6.1 x 11.2 Dot Matrix D0220LD-48-4002F
Call 2 x 20 120.0 x 42.0 x 9.0 3.0 x 5.0 Dot Matrix D0420SD-42-2001FN
Call 4 x 20 125.0 x 53.5 x 10.5 3.3 x 5.0 Dot Matrix D0420SD-53-4001F
Dot Matrix
Spec Info
Lines x Characters
Glass Size(L x H x T) mm
Character Size (W x H) mm
Character Type Newhaven Part Number
Call 1 x 16 110.2 x 20.5 x 6.1 3.0 x 5.0 Alpha D0116SY-20-1601FB
Call 1 x 20 134.0 x 20.5 x 6.5 3.0 x 6.5 Alpha D0120MY-A1H
Call 1 x 20 205.0 x 29.0 x 8.5 5.5 x 11.0 Alpha D0120MY-29-2001
Alphanumeric
Spec Info Lines x Characters
Glass Size(L x H x T) mm
Character Size (W x H) mm
Character Type Newhaven Part Number
Call 1 x 3 48.2 x 20.5 x 6.5 4.4 x 8.0 7-Seg D0103MT-20-0108
Call 1 x 6 98.0 x 33.0 x 8.0 6.8 x 12.4 7-Seg D0106LT-33-0604N
Call 1 x 7 98.0 x 33.0 x 8.0 6.0 x 12.4 7-Seg D0107LT-33-0701A
Call 1 x 9 112.0 x 25.0 x 6.8 9.7 x 4.4 7-Seg D0109MT-25-1101
Call 1 x 11 160.0 x 33.0 x 8.0 6.3 x 12.5 7-Seg D0111LT-33-1101
Call 1 x 13 129.0 x 25.0 x 7. 4.2 x 9.6 7-Seg D0113MT-25-1302
Call 1 x 19 205.0 x 29.0 x 8.0 4.9/5.6 x 1.0/13.0 7-Seg D0119LT-29-1901
4-4
WWW.NEWHAVENDISPLAY.COM
Spec Info
Lines x Characters
Glass Size(L x H x T) mm
Character Size (W x H) mm
Character Type Newhaven Part Number
Call 1 x 16 110.2 x 20.5 x 6.1 3.0 x 5.0 Alpha D0116SY-20-1601FB
Call 1 x 20 134.0 x 20.5 x 6.5 3.0 x 6.5 Alpha D0120MY-A1H
Call 1 x 20 205.0 x 29.0 x 8.5 5.5 x 11.0 Alpha D0120MY-29-2001
VFD PRODUCT TABLES
Spec Page
Dot Format
Outer Panel(L x H x T)
mm
Character Size (W x H) mm
Font Type Interface Serial/Parallel
Newhaven Part Number
5-133 1 x 16 80 x 36 x 11 2 x 5 Dot Matrix Serial/ Parallel M0116SD-161SDBR1-1
5-134 1 x 16 100 x 28 x 22 3 x 5 Dot Matrix Serial M0116SD-161SDBR1-S
5-135 2 x 16 80 x 36 x 18 2 x 5 Dot Matrix Serial/Parallel M0216SD-162SDAR2-1
5-136 2 x 16 85 x 36 x 19 2 x 4 Dot Matrix Serial/Parallel M0216SD-162SDAR1
5-137 2 x 16 84 x 44 x 16 2 x 4 Dot Matrix Serial/Parallel M0216SD-162SDAR8
5-138 2 x 16 122 x 44 x 20 4 x 9 Dot Matrix Serial/Parallel M0216MD-162MDBR2-J
5-139 2 x 20 116 x 37 x 17 2 x 5 Dot Matrix Serial/Parallel M0220SD-202SDAR1
5-140 2 x 20 116 x 37 x 17 2 x 5 Dot Matrix Serial/Parallel M0220SD-202SDAR1-1G
5-141 2 x 20 146 x 43 x 19 4 x 9 Dot Matrix Serial M0220MD-202MDAR1-1
5-142 2 x 20 146 x 43 x 19 4 x 9 Dot Matrix Parallel M0220MD-202MDAR1-3
5-143 2 x 24 118 x 36 x 16 2 x 5 Dot Matrix Serial/Parallel M0224SD-242MDBR1-1
5-144 2 x 40 182 x 33 x 17 2 x 5 Dot Matrix Serial/Parallel M0240SD-402MDAR1-3
5-145 4 x 20 100 x 60 x 20 3 x 5 Dot Matrix Parallel M0420SD-204SDAR1-3
Spec Page
Lines x Characters Glass Size (L x H x T) mm
Character Size (W x H) mm
Character Type Newhaven Part Number
5-131 1 x 16 125 x 35 x 18 3 x 5 Alphanumeric M0116SY-161MSAR1-S2
5-132 1 x 16 177 x 32 x 15 6 x 11 Alphanumeric M0116MY-161LSBR2-S2
VFD Module Displays
Alphanumeric
Dot Matrix
4-5
5-1
5-3
NHD-0216KZW-A
Pin Description: Parallel Interface(default) Pin Description: Serial InterfacePin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for OLED and logic
3 NC No Connect
4 RS Register select signal. RS=0: Command, RS=1:Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 NC No Connect
16 NC No Connect
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for OLED and logic
3-11 NC No Connect
12 SCL Serial Clock signal
13 SDO Serial Data output signal
14 SDI Serial Data input signal
15 NC No Connect
16 /CS Active LOW Chip Select signal
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -40 - +80 °C
Storage Temperature Range Tst Absolute Max -40 - +80 °C
Supply Voltage VDD 3.0 5.0 5.3 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 30 - mA
“H” Level Input VIH 0.9*VDD - VDD V
“L” Level Input VIL VSS - 0.1*VDD V
“H” Level Output VOH 0.8*VDD - VDD V
“L” Level Output VOL VSS - 0.2 VDD V
Electrical Characteristics
2.5
31.0
2.5 75.0
66.0(VA)
161
4.23
11.8
5(A
A)
40.55
80.0 0.5
36.0
0.5
5.7
10.3
18.3
4.957.55
8.0 P2.54*1 5=38 .11.8 16- 1.0PTH 2
4- 2.5 PTH4- 5.0 PAD
25.2
16.0
(VA
)
71.2
56.95(AA)
5.110.0Max
1.6
OLED Module Specification
Fron
t
5-4WWW.NEWHAVENDISPLAY.COM
NHD-0216SZW-B
Pin Description: Parallel Interface(default) Pin Description: Serial InterfacePin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for OLED and logic
3 NC No Connect
4 RS Register select signal. RS=0: Command, RS=1:Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 NC No Connect
16 NC No Connect
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for OLED and logic
3-11 NC No Connect
12 SCL Serial Clock signal
13 SDO Serial Data output signal
14 SDI Serial Data input signal
15 NC No Connect
16 /CS Active LOW Chip Select signal
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -40 - +80 °C
Storage Temperature Range Tst Absolute Max -40 - +80 °C
Supply Voltage VDD 3.0 5.0 5.3 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 43 - mA
“H” Level Input VIH 0.9*VDD - VDD V
“L” Level Input VIL VSS - 0.1*VDD V
“H” Level Output VOH 0.8*VDD - VDD V
“L” Level Output VOL VSS - 0.2 VDD V
Electrical Characteristics
10.0
13.58 91.14 (AA)11.5 99.0(VA)
8.0
24.0
(VA
)2.
934
.2
P2.54*15=38.110.984-O3.5 PTH 2.0
122.0 0.5
44.0
0.5
4-O6.5 PAD18-O1.0 PTH
2.5
115.03.5
3.5
37.0
18.9
8 (A
A)
105.68.24.7
10.0MAX
1.6
OLED Module SpecificationOLED Module Specification
Fron
t
5-5
NHD-0220DZW-A OLED Module Specification
Pin Description: Parallel Interface(default) Pin Description: Serial InterfacePin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for OLED and logic
3 NC No Connect
4 RS Register select signal. RS=0: Command, RS=1:Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 NC No Connect
16 NC No Connect
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for OLED and logic
3-11 NC No Connect
12 SCL Serial Clock signal
13 SDO Serial Data output signal
14 SDI Serial Data input signal
15 NC No Connect
16 /CS Active LOW Chip Select signal
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -40 - +80 °C
Storage Temperature Range Tst Absolute Max -40 - +80 °C
Supply Voltage VDD 3.0 5.0 5.3 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 35 - mA
“H” Level Input VIH 0.9*VDD - VDD V
“L” Level Input VIL VSS - 0.1*VDD V
“H” Level Output VOH 0.8*VDD - VDD V
“L” Level Output VOL VSS - 0.2 VDD V
Electrical Characteristics
9.20
11.8
5(A
A)
18.6
0(V
A)
20.0316.50
13.40
77.30(AA)85.00(VA)
91.2
59.04.0 108.0
12.5
7
5.90
25.2
037
.00.
5
116.0 0.5
4.0
29.0
12
1516
4- 3.5 PTH4- 5.5 PAD
1.6
4.99.8 MAX
PIN DETAIL
2.52.54
8.34
17.7
8(P
2.54
*7)
1
15
2
16
Fron
t
5-6WWW.NEWHAVENDISPLAY.COM
NHD-0420DZW-A
Pin Description: Parallel Interface(default) Pin Description: Serial InterfacePin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for OLED and logic
3 NC No Connect
4 RS Register select signal. RS=0: Command, RS=1:Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 NC No Connect
16 NC No Connect
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for OLED and logic
3-11 NC No Connect
12 SCL Serial Clock signal
13 SDO Serial Data output signal
14 SDI Serial Data input signal
15 /CS Active LOW Chip Select signal
16 NC No Connect
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -40 - +80 °C
Storage Temperature Range Tst Absolute Max -40 - +80 °C
Supply Voltage VDD 3.0 5.0 5.3 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 43 - mA
“H” Level Input VIH 0.9*VDD - VDD V
“L” Level Input VIL VSS - 0.1*VDD V
“H” Level Output VOH 0.8*VDD - VDD V
“L” Level Output VOL VSS - 0.2 VDD V
Electrical Characteristics
0.8
28.6
10.0 P2.54*15=38.10
13.63 70.16(AA)10.50 77.0(VA)
2.00 94.0
19.5
320
.95(
AA)
17.4
025
.20(
VA)
14.0
032
.060
.00.
5
2.0
2.50 93.0
2.50
55.0
2.50
16-O1.0 PTH
4-O2.5 PTH4-O5.0 PAD
98.0 0.5
1 16
49.0 1.60
4.710.00 MAX
OLED Module SpecificationOLED Module Specification
Fron
t
5-7
NHD-2.23-12832UC
Pin Description: Parallel Interface Pin Description: Serial Interface Pin Description: I2C InterfacePin No.
Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for OLED and logic
3 NC No Connect
4 D/C Register select signal. D/C=0: Command, D/C=1:Data
5 R/W or /WR
6800-interface: Read/Write select signal, R/W=1: Read R/W: =0: Write 8080-interface: Active LOW Write Signal
6 E or /RD
6800-interface: Operation enable signal. Falling edge triggered. 8080-interface: Active LOW Read Signal
7-14 DB0-DB7 8-bit Bi-directional data bus lines.
15 NC No Connect
16 /RES Active LOW Reset signal.
17 /CS Active LOW Chip select signal.
18 NC No Connect
19 BS2 MPU Interface Select signal
20 BS1 MPU Interface Select signal
Pin No.
Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for OLED and logic
3 NC No Connect
4 D/C Register select signal. D/C=0: Command, D/C=1:Data
5-6 VSS Ground
7 SCLK Serial Clock signal.
8 SDIN Serial Data Input signal.
9 NC No Connect
10-14 VSS Ground
15 NC No Connect
16 /RES Active LOW Reset signal.
17 /CS Active LOW Chip select signal.
18 NC No Connect
19 BS2 MPU Interface Select signal.
20 BS1 MPU Interface Select signal.
Pin No.
Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for OLED and logic
3 NC No Connect
4 SA0 Slave Address Selection signal.
5-6 VSS Ground
7 SCL Serial Clock signal.
8 SDA IN Serial Data input signal (pins 8 and 9 can be tied together).
9 SDA OUT Serial Data output signal (pin 9 can be No Connect).
10-14 VSS Ground
15 NC No Connect
16 /RES No Connect
17 VSS Ground
18 NC No Connect
19 BS2 MPU Interface Select signal
20 BS1 MPU Interface Select signal
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -40 - +85 °C
Storage Temperature Range Tst Absolute Max -40 - +90 °C
Supply Voltage VDD 2.4 2.8 3.5 V
Supply Current (logic) IDD Ta=25 °C, VDD=2.8V - 180 300 µA
Supply Current (display) ICCVDD=2.8V, 50% ON - 20 25 mA
VDD=2.8V, 100% ON - 28 35 mA
Sleep Mode Current IDD+ICC SLEEP - 3 15 µA
“H” Level Input VIH 0.8*VDD - VDD V
“L” Level Input VIL VSS - 0.2*VDD V
“H” Level Output VOH 0.9*VDD - VDD V
“L” Level Output VOL VSS - 0.1 VDD V
Electrical Characteristics
OLED Module Specification
Fron
t
5-8WWW.NEWHAVENDISPLAY.COM
NHD-2.7-12864UC
Pin Description: Parallel Interface Pin Description: Serial InterfacePin No.
Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for OLED and logic
3 NC No Connect
4 D/C Register select signal. D/C=0: Command, D/C=1:Data
5 R/W or /WR
6800-interface: Read/Write select signal, R/W=1: Read R/W: =0: Write 8080-interface: Active LOW Write Signal
6 E or /RD
6800-interface: Operation enable signal. Falling edge triggered. 8080-interface: Active LOW Read Signal
7-14 DB0-DB7 8-bit Bi-directional data bus lines.
15 NC No Connect
16 /RES Active LOW Reset signal.
17 /CS Active LOW Chip select signal.
18 NC No Connect
19 BS2 MPU Interface Select signal
20 BS1 MPU Interface Select signal
Pin No.
Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for OLED and logic
3 NC No Connect
4 D/C Register select signal. D/C=0: Command, D/C=1:Data
5-6 VSS Ground
7 SCLK Serial Clock signal.
8 SDIN Serial Data Input signal.
9 NC No Connect
10-14 VSS Ground
15 NC No Connect
16 /RES Active LOW Reset signal.
17 /CS Active LOW Chip select signal.
18 NC No Connect
19 BS2 MPU Interface Select signal.
20 BS1 MPU Interface Select signal.
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -40 - +85 °C
Storage Temperature Range Tst Absolute Max -40 - +90 °C
Supply Voltage VDD 2.4 2.8 3.5 V
Supply Current (logic) IDD Ta=25 °C, VDD=2.8V - 250 400 µA
Supply Current (display) ICCVDD=2.8V, 50% ON - 31 39 mA
VDD=2.8V, 100% ON - 53 66 mA
Sleep Mode Current IDD+ICC SLEEP - 2 10 µA
“H” Level Input VIH 0.8*VDD - VDD V
“L” Level Input VIL VSS - 0.2*VDD V
“H” Level Output VOH 0.9*VDD - VDD V
“L” Level Output VOL VSS - 0.1 VDD V
Electrical Characteristics
OLED Module SpecificationOLED Module Specification
5-9
NHD-2.8-25664UC
Pin Description: Parallel Interface Pin Description: Serial InterfacePin No.
Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for OLED and logic
3 NC No Connect
4 D/C Register select signal. D/C=0: Command, D/C=1:Data
5 R/W or /WR
6800-interface: Read/Write select signal, R/W=1: Read R/W: =0: Write 8080-interface: Active LOW Write Signal
6 E or /RD
6800-interface: Operation enable signal. Falling edge triggered. 8080-interface: Active LOW Read Signal
7-14 DB0-DB7 8-bit Bi-directional data bus lines.
15 NC No Connect
16 /RES Active LOW Reset signal.
17 /CS Active LOW Chip select signal.
18 NC No Connect
19 BS1 MPU Interface Select signal
20 BS0 MPU Interface Select signal
Pin No.
Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for OLED and logic
3 NC No Connect
4 D/C Register select signal. D/C=0: Command, D/C=1:Data
5-6 VSS Ground
7 SCLK Serial Clock signal.
8 SDIN Serial Data Input signal.
9 NC No Connect
10-14 VSS Ground
15 NC No Connect
16 /RES Active LOW Reset signal.
17 /CS Active LOW Chip select signal.
18 NC No Connect
19 BS1 MPU Interface Select signal.
20 BS0 MPU Interface Select signal.
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -40 - +85 °C
Storage Temperature Range Tst Absolute Max -40 - +90 °C
Supply Voltage VDD 2.4 2.5 2.6 V
Supply Current (logic) IDD Ta=25 °C, VDD=2.5V - 1.8 2.25 mA
Supply Current (display) ICCVDD=2.5V, 50% ON - 25.5 31.9 mA
VDD=2.5V, 100% ON - 40.1 51.1 mA
Sleep Mode Current IDD+ICC SLEEP - 2 10 µA
“H” Level Input VIH 0.8*VDD - VDD V
“L” Level Input VIL VSS - 0.2*VDD V
“H” Level Output VOH 0.9*VDD - VDD V
“L” Level Output VOL VSS - 0.1 VDD V
Electrical Characteristics
OLED Module Specification
Fron
t
5-10WWW.NEWHAVENDISPLAY.COM
NHD-3.12-25664UC
Pin Description: Parallel Interface Pin Description: Serial InterfacePin No.
Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for OLED and logic
3 NC No Connect
4 D/C Register select signal. D/C=0: Command, D/C=1:Data
5 R/W or /WR
6800-interface: Read/Write select signal, R/W=1: Read R/W: =0: Write 8080-interface: Active LOW Write Signal
6 E or /RD
6800-interface: Operation enable signal. Falling edge triggered. 8080-interface: Active LOW Read Signal
7-14 DB0-DB7 8-bit Bi-directional data bus lines.
15 NC No Connect
16 /RES Active LOW Reset signal.
17 /CS Active LOW Chip select signal.
18 NC No Connect
19 BS1 MPU Interface Select signal
20 BS0 MPU Interface Select signal
Pin No.
Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for OLED and logic
3 NC No Connect
4 D/C Register select signal. D/C=0: Command, D/C=1:Data
5-6 VSS Ground
7 SCLK Serial Clock signal.
8 SDIN Serial Data Input signal.
9 NC No Connect
10-14 VSS Ground
15 NC No Connect
16 /RES Active LOW Reset signal.
17 /CS Active LOW Chip select signal.
18 NC No Connect
19 BS1 MPU Interface Select signal.
20 BS0 MPU Interface Select signal.
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -40 - +85 °C
Storage Temperature Range Tst Absolute Max -40 - +90 °C
Supply Voltage VDD 2.4 2.5 2.6 V
Supply Current (logic) IDD Ta=25 °C, VDD=2.5V - 180 300 µA
Supply Current (display) ICCVDD=2.5V, 50% ON - 28.1 35.1 mA
VDD=2.5V, 100% ON - 47.7 59.7 mA
Sleep Mode Current IDD+ICC SLEEP - 22 110 µA
“H” Level Input VIH 0.8*VDD - VDD V
“L” Level Input VIL VSS - 0.2*VDD V
“H” Level Output VOH 0.9*VDD - VDD V
“L” Level Output VOL VSS - 0.1 VDD V
Electrical Characteristics
OLED Module SpecificationOLED Module Specification
Fron
t
5-11
5-13
NHD-1.8-128160ZF-CTXL # LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD - 2.8 - V
Supply Current IDD VDD=2.8V - 25.5 - mA
“H” Level input Vih 0.8VDD - VDD V
“L” Level Input Vil 0 - 0.2VDD V
“H” Level Output Voh 0.8VDD - VDD V
“L” Level Output Vol 0 - 0.2VDD V
Backlight Supply Voltage VLED 3.0 3.2 3.4 V
Backlight Supply Current ILED VLED=3.2V - 30 - mA
Brightness YL 100 120 180 cd/m2
Electrical Characteristics
Pin No. Symbol Function Description
1 GND Ground
2 NC No Connect
3 NC No Connect
4 NC No Connect
5 NC No Connect
6 GND Ground
7 VDD Power Supply for LCD and logic (+2.8V)
8 /CS Active LOW Chip Select signal
9 RS Register Select: 0= write command, 1= write data
RGB*160
O'CLOCK
BG R
TFT
CF
Pin No. Symbol Function Description
10 /WR Active LOW Write signal
11 /RD Active LOW Read signal
12-19 D0~D7 Bi-directional data bus lines
20 /RST Active LOW Reset signal
21 GND Ground
22 LED1- Backlight Cathode
23 LED2- Backlight Cathode
24 NC No Connect
25 LED+ Power Supply for backlight
Fron
t
5-14WWW.NEWHAVENDISPLAY.COM
NHD-2.4-240320SF-CTXI #-1 LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -10 25 +60 °C
Storage Temperature Range Tst Absolute Max -20 25 +70 °C
Supply Voltage VDD 2.5 2.8 3.3 V
Supply Current IDD VDD=2.8V - 7 9 mA
“H” Level input Vih 0.8VDD - VDD V
“L” Level Input Vil 0 - 0.2VDD V
“H” Level Output Voh 0.8VDD - VDD V
“L” Level Output Vol 0 - 0.2VDD V
Backlight Supply Voltage VLED - 3.2 - V
Backlight Supply Current ILED VLED=3.2V - 20 - mA
Brightness YL - 350 - cd/m2
Electrical Characteristics
Pin No. Symbol Function Description
1 GND Ground
2 Y- No Connect
3 X+ No Connect
4 Y+ No Connect
5 X- No Connect
6 LCD_ID LCD ID pin (No Connect)
7 VDD Power Supply for LCD (+2.8V)
8 IDD Logic Signal Supply IDD= 1.65~VDD
9 FMARK Used when writing RAM data in sync with frame (No Connect)
10 /CS Active LOW Chip select (can tie to ground)
11 RS Register Select: 0= write index register, 1= write data
12 /WR Active LOW Write strobe
13 /RD Active LOW Read strobe
Pin No. Symbol Function Description
14-29 DB0-DB15 Bi-directional data bus. 8-bit: use DB15-DB816-bit: use DB15-DB0
30 /RESET Active LOW Reset
31 IMO IMO=0 : 16-bit i80 IMO=1: 8-bit i80
32 NC No Connect
33 GND Ground
34 LED-1 LED Cathode (Ground)
35 LED-2 LED Cathode (Ground)
36 LED-3 LED Cathode (Ground)
37 LED-4 LED Cathode (Ground)
38 LED-A LED Anode (+3.2V)
39 GND Ground
LCD Module Specification
Fron
t
Fron
t
5-15
NHD-2.4-240320SF-CTXI #-T1 LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -10 25 +60 °C
Storage Temperature Range Tst Absolute Max -20 25 +70 °C
Supply Voltage VDD 2.5 2.8 3.3 V
Supply Current IDD VDD=2.8V - 7 9 mA
“H” Level input Vih 0.8VDD - VDD V
“L” Level Input Vil 0 - 0.2VDD V
“H” Level Output Voh 0.8VDD - VDD V
“L” Level Output Vol 0 - 0.2VDD V
Backlight Supply Voltage VLED - 3.2 - V
Backlight Supply Current ILED VLED=3.2V - 20 - mA
Brightness YL - 350 - cd/m2
Electrical Characteristics
Pin No. Symbol Function Description
1 GND Ground
2 Y- Touch Panel-DOWN
3 X+ Touch Panel-LEFT
4 Y+ Touch Panel-UP
5 X- Touch Panel-RIGHT
6 LCD_ID LCD ID pin (No Connect)
7 VDD Power Supply for LCD (+2.8V)
8 IDD Logic Signal Supply IDD= 1.65~VDD
9 FMARK Used when writing RAM data in sync with frame (No Connect)
10 /CS Active LOW Chip select (can tie to ground)
11 RS Register Select: 0= write index register, 1= write data
12 /WR Active LOW Write strobe
13 /RD Active LOW Read strobe
Pin No. Symbol Function Description
14-29 DB0~DB15 Bi-directional data bus. 8-bit: use DB15-DB816-bit: use DB15-DB0
30 /RESET Active LOW Reset
31 IMO IM0=0 : 16-bit i80 IM0=1: 8-bit i80
32 NC No Connect
33 GND Ground
34 LED-1 LED Cathode (Ground)
35 LED-2 LED Cathode (Ground)
36 LED-3 LED Cathode (Ground)
37 LED-4 LED Cathode (Ground)
38 LED-A LED Anode (+3.2V)
39 GND Ground
Fron
t
Fron
t
5-16WWW.NEWHAVENDISPLAY.COM
NHD-2.4-240320SF-CTXI #-F1 LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -10 25 +60 °C
Storage Temperature Range Tst Absolute Max -20 25 +70 °C
Supply Voltage VDD 2.5 2.8 3.3 V
Supply Current IDD VDD=2.8V - 7 9 mA
“H” Level input Vih 0.8VDD - VDD V
“L” Level Input Vil 0 - 0.2VDD V
“H” Level Output Voh 0.8VDD - VDD V
“L” Level Output Vol 0 - 0.2VDD V
Backlight Supply Voltage VLED - 3.2 - V
Backlight Supply Current ILED VLED=3.2V - 20 - mA
Brightness YL - 350 - cd/m2
Electrical Characteristics
Pin No. Symbol Function Description
1 GND Ground
2 Y- No Connect
3 X+ No Connect
4 Y+ No Connect
5 X- No Connect
6 LCD_ID LCD ID pin (No Connect)
7 VDD Power Supply for LCD (+2.8V)
8 IDD Logic Signal Supply IDD= 1.65~VDD
9 FMARK Used when writing RAM data in sync with frame (No Connect)
10 /CS Active LOW Chip select (can tie to ground)
11 RS Register Select: 0= write index register, 1= write data
12 /WR Active LOW Write strobe
13 /RD Active LOW Read strobe
Pin No. Symbol Function Description
14-29 DB0~DB15 Bi-directional data bus. 8-bit: use DB15-DB816-bit: use DB15-DB0
30 /RESET Active LOW Reset
31 IMO IM0=0 : 16-bit i80 IM0=1: 8-bit i80
32 NC No Connect
33 GND Ground
34 LED-1 LED Cathode (Ground)
35 LED-2 LED Cathode (Ground)
36 LED-3 LED Cathode (Ground)
37 LED-4 LED Cathode (Ground)
38 LED-A LED Anode (+3.2V)
39 GND Ground
40 NC No Connect
LCD Module Specification
Fron
t
5-17
NHD-2.4-240320SF-CTXI #-FT1 LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -10 25 +60 °C
Storage Temperature Range Tst Absolute Max -20 25 +70 °C
Supply Voltage VDD 2.5 2.8 3.3 V
Supply Current IDD VDD=2.8V - 7 9 mA
“H” Level input Vih 0.8VDD - VDD V
“L” Level Input Vil 0 - 0.2VDD V
“H” Level Output Voh 0.8VDD - VDD V
“L” Level Output Vol 0 - 0.2VDD V
Backlight Supply Voltage VLED - 3.2 - V
Backlight Supply Current ILED VLED=3.2V - 20 - mA
Brightness YL - 350 - cd/m2
Electrical Characteristics
Pin No. Symbol Function Description
1 GND Ground
2 Y- Touch Panel-DOWN
3 X+ Touch Panel-LEFT
4 Y+ Touch Panel-UP
5 X- Touch Panel-RIGHT
6 LCD_ID LCD ID pin (No Connect)
7 VDD Power Supply for LCD (+2.8V)
8 IDD Logic Signal Supply IDD= 1.65~VDD
9 FMARK Used when writing RAM data in sync with frame (No Connect)
10 /CS Active LOW Chip select (can tie to ground)
11 RS Register Select: 0= write index register, 1= write data
12 /WR Active LOW Write strobe
13 /RD Active LOW Read strobe
Pin No. Symbol Function Description
14-29 DB0~DB15 Bi-directional data bus. 8-bit: use DB15-DB816-bit: use DB15-DB0
30 /RESET Active LOW Reset
31 IMO IM0=0 : 16-bit i80 IM0=1: 8-bit i80
32 NC No Connect
33 GND Ground
34 LED-1 LED Cathode (Ground)
35 LED-2 LED Cathode (Ground)
36 LED-3 LED Cathode (Ground)
37 LED-4 LED Cathode (Ground)
38 LED-A LED Anode (+3.2V)
39 GND Ground
40 NC No Connect
Fron
t
5-18WWW.NEWHAVENDISPLAY.COM
NHD-3.5-320240MF-ATXL #-1
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 25 +70 °C
Storage Temperature Range Tst Absolute Max -30 25 +80 °C
Supply Voltage VDD 3.0 3.3 3.6 V
Supply Current IDD VDD=3.3V - 8.6 - mA
“H” Level input Vih 0.7VDD - VDD V
“L” Level Input Vil 0 - 0.3VDD V
“H” Level Output Voh 0.7VDD - VDD V
“L” Level Output Vol 0 - 0.3VDD V
Backlight Supply Voltage VLED 18.6 19.2 21 V
Backlight Supply Current ILED VLED=19.2V - 20 25 mA
Brightness YL 240 300 - cd/m2
Electrical Characteristics
Pin No. Symbol Function Description
1 LED- Cathode for LED backlight
2 LED- Cathode for LED backlight
3 LED+ Anode for LED backlight (+19.2V @ 20mA)
4 LED+ Anode for LED backlight (+19.2V @ 20mA)
5 NC No Connect
6 NC No Connect
7 NC No Connect
8 /RESET Reset- active LOW
9 CS Serial interface chip select
10 SCL Serial interface clock
11 SDI Serial interface data
12-19 DB0-DB7 Blue signal data bus
20-27 DB8-DB15 Green signal data bus
28-35 DB16-DB23 Red signal data bus
36 HSYNC Horizontal sync signal
37 VSYNC Vertical sync signal
38 DCLK Dot clock signal
Pin No. Symbol Function Description
39 NC No Connect
40 NC No Connect
41 VDD Power for LCD and logic (+3.3V)
42 VDD Power for LCD and logic (+3.3V)
43 NC No Connect
44 NC No Connect
45 ID No Connect
46 NC No Connect
47 NC No Connect
48 NC No Connect
49 NC No Connect
50 NC No Connect
51 NC No Connect
52 DE Data Enable signal
53 GND Ground
54 GND Ground
LCD Module Specification
Front
Back
LCD Module Specification
Fron
t
5-19
NHD-3.5-320240MF-ATXL #-T-1
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 25 +70 °C
Storage Temperature Range Tst Absolute Max -30 25 +80 °C
Supply Voltage VDD 3.0 3.3 3.6 V
Supply Current IDD VDD=3.3V - 8.6 - mA
“H” Level input Vih 0.7VDD - VDD V
“L” Level Input Vil 0 - 0.3VDD V
“H” Level Output Voh 0.7VDD - VDD V
“L” Level Output Vol 0 - 0.3VDD V
Backlight Supply Voltage VLED 18.6 19.2 21 V
Backlight Supply Current ILED VLED=19.2V - 20 25 mA
Brightness YL 240 300 - cd/m2
Electrical Characteristics
Pin No. Symbol Function Description
1 LED- Cathode for LED backlight
2 LED- Cathode for LED backlight
3 LED+ Anode for LED backlight (+19.2V @ 20mA)
4 LED+ Anode for LED backlight (+19.2V @ 20mA)
5 NC No Connect
6 NC No Connect
7 NC No Connect
8 /RESET Reset- active LOW
9 CS Serial interface chip select
10 SCL Serial interface clock
11 SDI Serial interface data
12-19 DB0-DB7 Blue signal data bus
20-27 DB8-DB15 Green signal data bus
28-35 DB16-DB23 Red signal data bus
36 HSYNC Horizontal sync signal
37 VSYNC Vertical sync signal
38 DCLK Dot clock signal
Pin No. Symbol Function Description
39 NC No Connect
40 NC No Connect
41 VDD Power for LCD and logic (+3.3V)
42 VDD Power for LCD and logic (+3.3V)
43 NC No Connect
44 NC No Connect
45 ID No Connect
46 NC No Connect
47 NC No Connect
48 NC No Connect
49 NC No Connect
50 NC No Connect
51 NC No Connect
52 DE Data Enable signal
53 GND Ground
54 GND Ground
LCD Module Specification
12 34
X2
Y2
X1
Y1
76.6±0.2(outline)71.82(V.A.)70.08(A.A.)
63.6±0.2(outline)
55.05(V.A.)
52.56(A.A.)
22.9±0.5
50±0.5
14.5
4.5±0.3
3±0.3
4.5±0.3
0.3±0.05
1.1±0.1mm
5
3
ITO Film
ITO Glass
2-0.754-0.5PITCH 1*3=35
3±0.3
1 4
14
3±0.3
76.6±0.2(outline)
63.6±0.2(outline)ITO Glass
2.3
3.52
2.363.36
76.2 (D.S.A)
73.02 (D.S.A)
58.15 (D.S.A)
63.2 (D.S.A)
0.2
1.620.2
1.5
3.55
T=0.1mm
** see above for 3.5” Touch Panel dimensions. (For 3.5” TFT display itself: see page 5-18).
Pin No. Symbol Function Description
1 Y1 LEFT
2 X1 DOWN
3 Y2 RIGHT
4 X2 UP
Touch Panel Pin Description
Fron
t
5-20WWW.NEWHAVENDISPLAY.COM
LCD Module Specification NHD-4.3-480272MF-ATXI #-1 LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 3.0 3.3 3.6 V
Power Dissipation (White screen) fV=60Hz - 80 95 mW
Power Dissipation (Black screen) fV=60Hz - 85 100 mW
VSYNC frequency fV - 60 70 Hz
HSYNC frequency fH - 17.26 - kHz
PCLK frequency fPCLK - 9.2 - MHz
Backlight Supply Voltage VLED 20 21 22 V
Backlight Supply Current ILED VLED=21.0V - 32 40 mA
Backlight Power Consumption PBL - 650 - mW
Brightness YL 380 - 480 cd/m2
Electrical Characteristics
Pin No. Symbol Function Description
1 LED- Ground for Backlight
2 LED+ Backlight Power Supply (32mA @ 20~22V)
3 GND Ground
4 VDD Power supply for LCD and logic (3.3V)
5-12 R0-R7 Red Data Signals
13-20 G0-G7 Green Data Signals
21-28 B0-B7 Blue Data Signals
29 GND Ground
30 PCLK Data sample Clock signal
31 DISP Display ON/OFF signal
Pin No. Symbol Function Description
32 HSYNC Line synchronization signal
33 VSYNC Frame synchronization signal
34 DE Data Enable signal
35 AVDD No Connect
36 GND Ground
37 XR No Connect
38 YD No Connect
39 XL No Connect
40 YU No Connect
DETAIL A
0.01
00.
188
0.19
8
R
R
R
R
G
G
B
B
0.198P=0.066W=0.056S=0.010
Fron
t
5-21
NHD-4.3-480272MF-ATXI #-T-1 LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 3.0 3.3 3.6 V
Power Dissipation (White screen) fV=60Hz - 80 95 mW
Power Dissipation (Black screen) fV=60Hz - 85 100 mW
VSYNC frequency fV - 60 70 Hz
HSYNC frequency fH - 17.26 - kHz
PCLK frequency fPCLK - 9.2 - MHz
Backlight Supply Voltage VLED 20 21 22 V
Backlight Supply Current ILED VLED=21.0V - 32 40 mA
Backlight Power Consumption PBL - 650 - mW
Brightness YL 380 - 480 cd/m2
Electrical Characteristics
Pin No. Symbol Function Description
1 LED- Ground for Backlight
2 LED+ Backlight Power Supply (32mA @ 20~22V)
3 GND Ground
4 VDD Power supply for LCD and logic (3.3V)
5-12 R0-R7 Red Data Signals
13-20 G0-G7 Green Data Signals
21-28 B0-B7 Blue Data Signals
29 GND Ground
30 PCLK Data sample Clock signal
31 DISP Display ON/OFF signal
Pin No. Symbol Function Description
32 HSYNC Line synchronization signal
33 VSYNC Frame synchronization signal
34 DE Data Enable signal
35 AVDD No Connect
36 GND Ground
37 XR Touch Panel RIGHT
38 YD Touch Panel DOWN
39 XL Touch Panel LEFT
40 YU Touch Panel UP
FRO
NT
Fron
t
5-22WWW.NEWHAVENDISPLAY.COM
LCD Module Specification LCD Module Specification
NHD-5.7-320240WFB-CTXI #-1
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 3.0 3.3 3.6 V
Supply Current IDD VDD=3.3V - 121 - mA
Backlight Supply Voltage VLED 9.9 10.2 10.5 V
Backlight Supply Current ILED VLED=10.2V - 140 210 mA
Electrical Characteristics
Pin No. Symbol Function Description
1 GND Ground
2 VDD Power supply for LCD and logic (3.3V)
3 NC No Connect
4 D/C# Register select signal: 1= Data, 0=Command
5 WR# Active LOW Write signal, 8080 MPU interface
6 RD# Active LOW Read signal, 8080 MPU interface
7-14 (DB0-DB7) Bi-directional data bus lines
15 CS# Active LOW Chip select signal
16 RES# Active LOW Reset signal
17 NC No Connect
18 R/L Scan direction 1: Right (Tied internally)
19 U/D Scan direction 0: Down (Tied internally)
20 NC No Connect
43.5
32.0
CON1
(320*3)*240 Dots
115.20±0.2(AA)15.3
118.28±0.2(VA)(Frame)13.76
138.7±0.57.0
86.4
0±0.
2(A
A)
88.6
±0.2
(VA
)(Fr
ame)
101.
0±0.
210
9.0±
0.5
7.3
6.24.
0
200.0±10.0
4- PTH 7.4
94.4
6.3
152.0±0.2149.0±0.5
4.0
1
3
9.43
(Down-Side)CN-FPC-20P/P1.0
Backlight is 7 Parallel groups of 3-Serial LEDs each.
Fron
t
CN-FPC-50P/P0.5(Up-Side)
CN-FPC-20P/P1.0(Down-Side)
55.7
48.6
(38.9)
(22.
4)
78.0(PCB)
70.0
(PC
B)
1.0
7.0±
0.5
11.5
Max
5-23
NHD-5.7-320240WFB-CTXI #-T-1 LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 3.0 3.3 3.6 V
Supply Current IDD VDD=3.3V - 121 - mA
Backlight Supply Voltage VLED 9.9 10.2 10.5 V
Backlight Supply Current ILED VLED=10.2V - 140 210 mA
Electrical Characteristics
Pin No. Symbol Function Description
1 GND Ground
2 VDD Power supply for LCD and logic (3.3V)
3 NC No Connect
4 D/C# Register select signal: 1= Data, 0=Command
5 WR# Active LOW Write signal, 8080 MPU interface
6 RD# Active LOW Read signal, 8080 MPU interface
7-14 (DB0-DB7) Bi-directional data bus lines
15 CS# Active LOW Chip select signal
16 RES# Active LOW Reset signal
17 NC No Connect
18 R/L Scan direction 1: Right (Tied internally)
19 U/D Scan direction 0: Down (Tied internally)
20 NC No Connect
Backlight is 7 Parallel groups of 3-Serial LEDs each.
Pin No. Symbol Function Description
1 Y1 RIGHT
2 X1 LEFT
3 Y2 BOTTOM
4 X2 TOP
Touch Panel Pin Description
A
** See above for 5.7” Touch Panel dimensions. (For 5.7” TFT display itself: see page 5-22).
5-24WWW.NEWHAVENDISPLAY.COM
LCD Module Specification
NHD-5.7-320240WFB-ETXI #-1
Pin Description
Electrical Characteristics
(320*3)*240 Dots
115.20±0.2(AA)15.3
118.28±0.2(VA)(Frame)13.76
138.7±0.57.0
86.4
0±0.
2(A
A)
88.6
±0.2
(VA
)(Fr
ame)
101.
0±0.
210
9.0±
0.5
7.3
6.24.
0
200.0±10.0
4- PTH 7.4
94.4
6.3
152.0±0.2149.0±0.5
4.0
1
3
9.43
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 3.0 3.3 3.6 V
Supply Current IDD VDD=3.3V - 121 - mA
Backlight Supply Voltage VLED 9.9 10.2 10.5 V
Backlight Supply Current ILED VLED=10.2V - 140 210 mA
Pin No. Symbol Function Description
1 GND Ground
2 VDD Power supply for LCD and logic (3.3V)
3 NC No Connect
4 D/C# Register select signal: 1= Data, 0=Command
5 WR# Active LOW Write signal, 8080 MPU interface
6 RD# Active LOW Read signal, 8080 MPU interface
7-22 (DB0-DB15) Bi-directional data bus lines
Backlight is 7 Parallel groups of 3-Serial LEDs each.
Pin No. Symbol Function Description
23 NC No Connect
24 NC No Connect
25 CS# Active LOW Chip select signal
26 RES# Active LOW Reset signal
27 R/L Scan direction 1: Right (Tied internally)
28 U/D Scan direction 0: Down (Tied internally)
29-32 NC No Connect
LCD Module Specification
1.0
7.0±0.511.5Max
Fron
t
Fron
t
5-25
LCD Module SpecificationNHD-5.7-320240WFB-ETXI #-T-1
Pin Description
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 3.0 3.3 3.6 V
Supply Current IDD VDD=3.3V - 121 - mA
Backlight Supply Voltage VLED 9.9 10.2 10.5 V
Backlight Supply Current ILED VLED=10.2V - 140 210 mA
Pin No. Symbol Function Description
1 GND Ground
2 VDD Power supply for LCD and logic (3.3V)
3 NC No Connect
4 D/C# Register select signal: 1= Data, 0=Command
5 WR# Active LOW Write signal, 8080 MPU interface
6 RD# Active LOW Read signal, 8080 MPU interface
7-22 (DB0-DB15) Bi-directional data bus lines
23 NC No Connect
24 NC No Connect
25 CS# Active LOW Chip select signal
26 RES# Active LOW Reset signal
27 R/L Scan direction 1: Right (Tied internally)
28 U/D Scan direction 0: Down (Tied internally)
29-32 NC No Connect
Backlight is 7 Parallel groups of 3-Serial LEDs each.
Pin No. Symbol Function Description
1 Y1 LEFT
2 X1 DOWN
3 Y2 RIGHT
4 X2 UP
Touch Panel Pin Description
A
** See above for 5.7” Touch Panel dimensions. (For 5.7” TFT display itself: see page 5-24).
5-26WWW.NEWHAVENDISPLAY.COM
LCD Module SpecificationNHD-5.7-640480WF-CTXL #
Pin Description
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 3.0 3.3 3.6 V
Supply Current IDD VDD=3.3V - 190 250 mA
Backlight Supply Voltage VLED - 23.1 24.5 V
Backlight Supply Current ILED VLED=23.1V - 60 - mA
Backlight is 3 Parallel groups of 7-Serial LEDs each.
Pin No. Symbol Function Description
1 GND Ground
2 VDD Power supply for LCD and logic (3.3V)
3 NC No Connect
4 D/C# Register select signal: 1= Data, 0=Command
5 WR# Active LOW Write signal, 8080 MPU interface
6 RD# Active LOW Read signal, 8080 MPU interface
7-14 (DB0-DB7) Bi-directional data bus lines
15 CS# Active LOW Chip select signal
16 U/D Scan direction 1: Up, 0: Down
17 R/L Scan direction 1: Right, 0: Left
18 RES# Active LOW Reset signal
19 NC No Connect
20 NC No Connect
LCD Module Specification
Fron
t
24.0579.7021.25
3.89 1.50
1.81 4.20
115.20(AA)3.00117.50(VA)1.85
125.00±0.3
86.4
0(A
A)
3.50
88.7
0(V
A)
2.35
98.8
0±0.
3
64.4060.60
46.7
052
.10
4-R0.8
21
12.05103.709.25 0.18
0.18
0.06Dots Size 30/1
BGR
BGR
0.8
8.30MAX5.955.70
31.9
540
.00
26.8
5
(Down-Side)
CO
N3
1
32
CO
N2
1
22
CON1
24.5 46.928.6 44.9
4- PTH
1 50
Parts Area24.0L*16.0W
12CN2
16.00
5011.00
1.00
25.30 79.60 20.10
38.7
0
CN1
501
3.00
0.30
p0.5*49=24.500.50
5-27
LCD Module SpecificationNHD-5.7-640480WF-CTXL #-T
Pin Description
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 3.0 3.3 3.6 V
Supply Current IDD VDD=3.3V - 190 250 mA
Backlight Supply Voltage VLED - 23.1 24.5 V
Backlight Supply Current ILED VLED=23.1V - 60 - mA
Backlight is 3 Parallel groups of 7-Serial LEDs each.
Pin No. Symbol Function Description
1 GND Ground
2 VDD Power supply for LCD and logic (3.3V)
3 NC No Connect
4 D/C# Register select signal: 1= Data, 0=Command
5 WR# Active LOW Write signal, 8080 MPU interface
6 RD# Active LOW Read signal, 8080 MPU interface
7-14 (DB0-DB7) Bi-directional data bus lines
15 CS# Active LOW Chip select signal
16 U/D Scan direction 1: Up, 0: Down
17 R/L Scan direction 1: Right, 0: Left
18 RES# Active LOW Reset signal
19 NC No Connect
20 NC No Connect
Pin No. Symbol Function Description
1 X1 DOWN
2 Y1 LEFT
3 X2 UP
4 Y2 RIGHT
Touch Panel Pin Description
Fron
t
127. 14
115 .2 0( AA )3. 00117 .5 0( VA )1. 85125 .0 0 0. 3
86.4
0(A
A)
3.50
88.7
0(V
A)
2.35
98.8
00.3
64 .4 060 .6 0
46.7
052
.10
4- R0 .8
103. 70
21
Pi n 4
X2X2
125. 48 TP3. 44 118. 60 TP3. 64 11 8. 20 (V A) TP
4. 64 115 .7 0( AA )T P
1. 66
100.
94TP
3.02
89.8
0TP
3.22
89.4
0(V
A)T
P
4.22
87.4
0(A
A)T
P
+
+
5-28WWW.NEWHAVENDISPLAY.COM
LCD Module SpecificationNHD-7.0-800480WF-CTXI#
Pin Description
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 3.0 3.3 3.5 V
Supply Current IDD VDD=3.3V - 200 260 mA
“H” Level input Vih 0.8VDD - VDD+0.5 V
“L” Level input Vil - - 0.2VDD V
Backlight Supply Voltage VLED - 9.9 - V
Backlight Supply Current ILED VLED=9.9V 140 160 180 mA
Brightness YL 300 350 - cd/m2
Pin No. Symbol Function Description
1 GND Ground
2 VDD Power supply for LCD and logic (3.3V)
3 NC No Connect
4 D/C# Register select signal: 1= Data, 0=Command
5 WR# Active LOW Write signal (8080 mode)Read/Write signal (6800 mode)
6 RD# Active LOW Read signal (8080 mode)Edge trigger Enable signal (6800 mode)
7-14 (DB0-DB7) 8-bit bi-directional data bus lines
15 CS# Active LOW Chip select signal
16 NC No Connect
17 NC No Connect
18 RST# Active LOW Reset signal
19 NC No Connect
20 NC No Connect
LCD Module Specification
Fron
t
5-29
LCD Module SpecificationNHD-7.0-800480WF-CTXI#-T165. 00 ±0 .3
7. 15155. 30 ±0 .3
1. 4515 2. 40(V A)
84 .8 0±0. 3
104.
44±0
.3
1.72
94.3
0±0.
3
1.43
91.4
4(V
A)
48.8
7±0.
3
60. 0±5.0
7. 30155.0 0( VA )T P
7. 8015 4. 00 (A A) TP
2.35
93.0
4(V
A)T
P
2.65
92.4
4(A
A)T
P
27 .3 0
59.7
TO P
BOTT OM
LEFT RI GH T
41
5. 20 ±0 .3
5. 70
0. 30±0. 05
6. 59
7. 09 M AX
140
20.0
43.3
0±0.
5
61.00±0.5
97.50
P0.5
*31=
15.5
00
CO
N3
1
32
CO
N2
1
22
CON1
19.5
23.6
140
94.00
41
CO
N2
(Up-Side)CN-FPC-20P/P1.0
P1.0
*19=
19.0
Pin Description
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 3.0 3.3 3.5 V
Supply Current IDD VDD=3.3V - 200 260 mA
“H” Level input Vih 0.8VDD - VDD+0.5 V
“L” Level input Vil - - 0.2VDD V
Backlight Supply Voltage VLED - 9.9 - V
Backlight Supply Current ILED VLED=9.9V 140 160 180 mA
Brightness YL 300 350 - cd/m2
Pin No. Symbol Function Description
1 GND Ground
2 VDD Power supply for LCD and logic (3.3V)
3 NC No Connect
4 D/C# Register select signal: 1= Data, 0=Command
5 WR# Active LOW Write signal (8080 mode)Read/Write signal (6800 mode)
6 RD# Active LOW Read signal (8080 mode)Edge trigger Enable signal (6800 mode)
7-14 (DB0-DB7) 8-bit bi-directional data bus lines
15 CS# Active LOW Chip select signal
16 NC No Connect
17 NC No Connect
18 RST# Active LOW Reset signal
19 NC No Connect
20 NC No Connect
Pin No. Function Description
1 RIGHT
2 BOTTOM
3 LEFT
4 TOP
Touch Panel Pin Description
Fron
t
(P0.5*39)
5-30WWW.NEWHAVENDISPLAY.COM
NHD-0108BZ LCD Module Specification
Pin DescriptionPin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (and backlight +3.0V)
3 V0 Power supply for contrast (approx. 0.6V, or 3.0V=0V)
4 RS Register select signal. RS=0: Command, RS=1:Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.4 - V
Supply Voltage (3V) VDD 2.7 3.0 3.3 V
Supply Current (3V) IDD Ta=25 °C, VDD=3.0V - 1.0 1.5 mA
Supply for LCD (contrast 3V) VDD-Vo Ta=25 °C - 3.0 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9** - - V
“L” Level Output VOL - - 0.4** V
Backlight Supply Voltage (Yellow/Green 3V) VLED - 3.0 - V
Backlight Supply Current (Yellow/Green 3V) ILED VLED=3.0V 30 45 60 mA
Electrical Characteristics
**For 3V display, level output voltage may vary.
LCD Module Specification
Fron
tWith and Without LED Backlight
5-31
NHD-0108CZ LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.4 - V
Supply Voltage (3V) VDD 2.7 3.0 3.3 V
Supply Current (3V) IDD Ta=25 °C, VDD=3.0V - 1.0 1.5 mA
Supply for LCD (contrast 3V) VDD-Vo Ta=25 °C - 3.0 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9** - - V
“L” Level Output VOL - - 0.4** V
Backlight Supply Voltage (White 3V) VLED 2.8 3.0 3.3 V
Backlight Supply Current (White 3V) ILED VLED=3.0V 20 30 40 mA
Backlight Supply Voltage (Yellow/Green) VLED - 4.2 4.6 V
Backlight Supply Current (Yellow/Green) ILED VLED=4.2V - 100 120 mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V or 3V=+3.0V)
3 V0 Power supply for contrast (approx. 0.6V or for 3V approx. 0V)
4 RS Register select signal. RS=0: Command, RS=1:Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB4-DB7 Four high order bi-directional three-state data bus lines.
11-14 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
A LED+ Power supply for LED backlight (+4.2V or 3V=+3.0V)
K LED- Ground for backlight
Pin Description
1
10
11
14
A
K
With LED Backlight Without LED Backlight
**For 3V display, level output voltage may vary.
Fron
t
Fron
t
5-32WWW.NEWHAVENDISPLAY.COM
NHD-0108HZ LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 3.1 3.3 3.5 V
Supply Current IDD Ta=25 °C, VDD=3.3V - 1.0 1.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 3.0 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 0.75 VDD - - V
“L” Level Output VOL - - 0.2 VDD V
Backlight Supply Voltage (White) VLED - 3.0 - V
Backlight Supply Current (White) ILED VLED=3.0V - 15 - mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+3.3V)
3 RS Register select signal. RS=0: Command, RS=1:Data
4 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
5 E Operation enable signal. Falling edge triggered.
6-9 DB4-DB7 Four high order bi-directional three-state data bus lines.
10 LED+ Power supply for LED backlight (+3.0V)
11 LED- Ground for backlight
Pin Description
SCALE=2.0:1
DOTS DETAIL
A A
LCD Module Specification
Fron
t
5-33
NHD-0108FZ LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD - 5.0 - V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.4 - V
Supply Voltage (3V) VDD 2.7 3.0 3.3 V
Supply Current (3V) IDD Ta=25 °C, VDD=3.0V - 1.0 1.5 mA
Supply for LCD (contrast 3V) VDD-Vo Ta=25 °C - 3.0 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9** - - V
“L” Level Output VOL - - 0.4** V
Backlight Supply Voltage (Yellow/Green 3V) VLED - 3.0 - V
Backlight Supply Current (Yellow/Green 3V) ILED VLED=3.0V - 120 140 mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V or +3.0V)
3 V0 Power supply for contrast (approx. 0.6V or for 3V approx. 0V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+3.0V)
16 LED- Ground for backlight
Pin Description
Without LED BacklightWith LED Backlight
**For 3V display, level output voltage may vary.
Fron
t
Fron
t
5-34WWW.NEWHAVENDISPLAY.COM
NHD-0208AZ LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.5 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.5 - V
Supply Voltage (3V) VDD 2.7 3.0 3.3 V
Supply Current (3V) IDD Ta=25 °C, VDD=3.0V - 1.0 1.5 mA
Supply for LCD (contrast 3V) VDD-Vo Ta=25 °C - 3.0 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9** - - V
“L” Level Output VOL - - 0.4** V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED=5.0V - 90 100 mA
Backlight Supply Voltage (White 3V) VLED - 3.0 - V
Backlight Supply Current (White 3V) ILED VLED=3.0V - 15 25 mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V or 3V= +3.0V)
3 V0 Power supply for contrast (approx. 0.5V or 3V approx. 0V or -0.1V )
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+5.0V via on-board resistor or 3V=+3.0V)
16 LED- Ground for backlight
Pin Description
21
1615
ARRAY BKL9.0
WITHOUT BKLSIDE BKL
3.7T1
13.5
8.0T2
mm
mm
UNIT
**For 3V display, level output voltage may vary.
LCD Module Specification
Fron
t
5-35
NHD-0208BZ LCD Module Specification
Electrical Characteristics
With LED BacklightWithout LED Backlight
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.0 1.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.4 - V
Supply Voltage (3V) VDD 2.7 3.0 3.3 V
Supply Current (3V) IDD Ta=25 °C, VDD=3.0V - 1.0 1.5 mA
Supply for LCD (contrast 3V) VDD-Vo Ta=25 °C - 3.0 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9** - - V
“L” Level Output VOL - - 0.4** V
Backlight Supply Voltage (Yellow/Green) VLED - 4.2 - V
Backlight Supply Current (Yellow/Green) ILED VLED=4.2V - 70 80 mA
Backlight Supply Voltage (White 3V) VLED - 3.0 - V
Backlight Supply Current (White 3V) ILED VLED=3.0V - 15 25 mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V or 3V= +3.0V)
3 V0 Power supply for contrast (approx. 0.6V or 3V= 0V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
A LED+ Power supply for LED backlight (+4.2V or 3V=+3.0V)
K LED- Ground for backlight
Pin Description
13.0
9.0
**For 3V display, level output voltage may vary.
Fron
t
Fron
t
5-36WWW.NEWHAVENDISPLAY.COM
NHD-0112BZ LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 0.8 1.0 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.4 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 4.2 - V
Backlight Supply Current (Yellow/Green) ILED VLED=4.2V - 70 80 mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.6V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB4-DB7 Four high order bi-directional three-state data bus lines.
11-14 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
15 NC No connect
A LED+ Power supply for LED backlight (4.2V)
K LED- Ground for backlight
Pin Description
1
10
11
15
A
K
LCD Module Specification
Fron
t
5-37
NHD-0212WH-A LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.5 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.2 - mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C 3.5 4.2 5.7 V
“H” Level input VIH 0.7VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED 4.0 4.2 4.4 V
Backlight Supply Current (Yellow/Green) ILED VLED=4.2V 32 40 60 mA
Backlight Supply Voltage (White) VLED 3.4 3.5 3.6 V
Backlight Supply Current (White) ILED VLED=3.5V 14.4 16 25 mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.8V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 A Power supply for LED backlight (+4.2V, or White=+3.5V)
Pin Description
A** Y/G Backlight=9.7 maxWhite Backlight=14.5 max
2.65
5.50
3.20
6.20
The non-specified tolerance of dimension is 0.3mm.
DOT SIZE
0.450.55
0.60
0.70
8.9310.15 37.85(AA)
46.0(VA)4.8546.74.551.32.2
55.7 0.511
.7(AA
)8.7
514
.5(VA
)17
.57.2
524
.73.6
532
.00.5
17.7818.96
12.25 31.2
9.011
.530
.01.0
1.5
3.0
1.5
(P1.27*14)
1 15
15- 0.7PTH15- 1.0PAD
1.0
4- 1.0PTH
4-R1.25
1.6
5.1
A**
Fron
t
5-38WWW.NEWHAVENDISPLAY.COM
NHD-0116AZ LCD Module Specification
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.5V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+5.0V via on-board resistor)
16 LED- Ground for backlight
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 0.8 1.0 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.5 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED=5.0V - 110 125 mA
Pin Description
* For no backlight version, pins 15 and 16 = NC (No Connect)
1 16
With LED Backlight Without LED Backlight
LCD Module Specification
Fron
t
Fron
t
5-39
NHD-0116DZ LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.5 - V
Supply Voltage (3V) VDD - 3.0 - V
Supply Current (3V) IDD Ta=25 °C, VDD=3.0V - 1.0 1.5 mA
Supply for LCD (contrast 3V) VDD-Vo Ta=25 °C - 3.0 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9** - - V
“L” Level Output VOL - - 0.4** V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED=5.0V - 110 125 mA
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED=5.0V - 15 20 mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V or 3V= +3.0V)
3 V0 Power supply for contrast (approx. 0.5V, or 3V= 0V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+5.0V via on-board resistor)
16 LED- Ground for Backlight
Pin Description
**For 3V display, level output voltage may vary.
Front
5-40WWW.NEWHAVENDISPLAY.COM
NHD-0116GZ LCD Module Specification
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C,VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.5 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED=5.0V - 150 175 mA
Backlight Supply Voltage (Pure Green) VLED - 5.0 - V
Backlight Supply Current (Pure Green) ILED VLED=5.0V - 30 - mA
Backlight Supply Voltage (Blue) VLED - 5.0 - V
Backlight Supply Current (Blue) ILED VLED=5.0V - 30 - mA
Backlight Supply Voltage (Orange) VLED - 5.0 - V
Backlight Supply Current (Orange) ILED VLED=5.0V - 30 - mA
Backlight Supply Voltage (Amber) VLED - 5.0 - V
Backlight Supply Current (Amber) ILED VLED=5.0V - 30 - mA
Backlight Supply Voltage (Red) VLED - 5.0 - V
Backlight Supply Current (Red) ILED VLED=5.0V - 30 - mA
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED=5.0V - 30 - mA
Electrical Characteristics
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.5V)
4 RS Register select signal. RS=0: Command, RS=1:Data
5 R/W Read/Write select signal, R/W=1: Read R/W:=0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED Backlight (+5.0V via on-board resistor)
16 LED- Ground for Backlight
Pin Description
LCD Module Specification
Front
5-41
NHD-02161Z LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.5 2.0 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.5 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 4.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED=4.0V - 30 - mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.5V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+4.0V)
16 LED- Ground for Backlight
Pin Description
Fron
t
5-42WWW.NEWHAVENDISPLAY.COM
NHD-0216HZ
LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.4 - V
Supply Voltage (3V) VDD 2.7 3.0 3.3 V
Supply Current (3V) IDD Ta=25 °C, VDD=3.0V - 1.5 2.5 mA
Supply for LCD (contrast 3V) VDD-Vo Ta=25 °C - 3.0 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9** - - V
“L” Level Output VOL - - 0.4** V
Backlight Supply Voltage (Yellow/Green) VLED - 4.2 4.6 V
Backlight Supply Current (Yellow/Green) ILED VLED=4.2V - 90 130 mA
Backlight Supply Voltage (White 3V) VLED - 3.0 - V
Backlight Supply Current (White 3V) ILED VLED=3.0V - 15 - mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V or 3V= +3.0V)
3 NC No Connect
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+4.2V or 3V= +3.0V)
16 LED- Ground for Backlight
Pin Description
**For 3V display, level output voltage may vary.
LCD Module Specification
Fron
t
5-43
NHD-0216CZ LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.5 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 4.2 - V
Backlight Supply Current (Yellow/Green) ILED VLED=4.2V - 120 160 mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.5V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
A LED+ Power supply for LED backlight (+4.2V)
K LED- Ground for Backlight
Pin Description
Fron
t
5-44WWW.NEWHAVENDISPLAY.COM
NHD-0216T2Z LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.5 2.0 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.5 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL -0.3 - 0.6 V
“H” Level Output VOH 3.9 - VDD V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED=5.0V - 15 - mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.5V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+5.0V via on-board resistor)
16 LED- Ground for Backlight
Pin Description
16 1 LED-
LED+R A
K
LCD Module Specification
Fron
t
5-45
NHD-0216PZ LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.4 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED=5.0V - 120 - mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.6V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+5.0V via on-board resistor)
16 LED- Ground for Backlight
Pin Description
Fron
t
5-46WWW.NEWHAVENDISPLAY.COM
NHD-0216XZ
LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.5 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED=5.0V - 20 - mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.5V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+5.0V via on-board resistor)
16 LED- Ground for Backlight
Pin Description
LCD Module Specification
Fron
t
5-47
NHD-0216K1Z
LCD Module Specification
Item Symbol Condition Min. Typ. Max. UnitOperating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.5 5.0 5.5 V
Supply Current IDD Ta=25 °C,VDD=5.0V 1.2 1.5 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C 3.7 4.5 4.6 V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED=5.0V - 120 130 mA
Backlight Supply Voltage (Pure Green) VLED - 5.0 - V
Backlight Supply Current (Pure Green) ILED VLED=5.0V - 20 - mA
Backlight Supply Voltage (Blue) VLED - 5.0 - V
Backlight Supply Current (Blue) ILED VLED=5.0V - 20 - mA
Backlight Supply Voltage (Orange) VLED - 5.0 - V
Backlight Supply Current (Orange) ILED VLED=5.0V - 20 - mA
Backlight Supply Voltage (Amber) VLED - 5.0 - V
Backlight Supply Current (Amber) ILED VLED=5.0V - 20 - mA
Backlight Supply Voltage (Red) VLED - 5.0 - V
Backlight Supply Current (Red) ILED VLED=5.0V - 20 - mA
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED=5.0V 16 20 - mA
Electrical Characteristics
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.5V)
4 RS Register select signal. RS=0: Command, RS=1:Data
5 R/W Read/Write select signal, R/W=1: Read R/W:=0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED Backlight (+5.0V via on-board resistor)
16 LED- Ground for Backlight
Pin Description
Display Pattern
SCALE: 4:1
Fron
t
5-48WWW.NEWHAVENDISPLAY.COM
NHD-0216K1Z (RGB) LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.5 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (RED) VLED - 2.2 - V
Backlight Supply Current (RED) ILED VLED=2.2V - 20 30 mA
Backlight Supply Voltage (GREEN) VLED - 3.3 - V
Backlight Supply Current (GREEN) ILED VLED=3.3V - 20 30 mA
Backlight Supply Voltage (BLUE) VLED - 3.3 - V
Backlight Supply Current (BLUE) ILED VLED=3.3V - 20 30 mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.5V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED- Ground for Backlight
16 LED+ RED Power supply for LED backlight (+2.2V)
17 LED+ GREEN Power supply for LED backlight (+3.3V)
18 LED+ BLUE Power supply for LED backlight (+3.3V)
Pin Description
LCD Module Specification
Fron
t
5-49
NHD-0216BZ LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C 4.4 4.5 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED=5.0V - 120 - mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.5V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+5.0V via on-board resistor)
16 LED- Ground for Backlight
Pin Description
With LED BacklightWithout LED Backlight
Fron
t
Fron
t
5-50WWW.NEWHAVENDISPLAY.COM
NHD-0216EZ LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.5 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED=5.0V - 120 - mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.5V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+5.0V via on-board resistor)
16 LED- Ground for Backlight
Pin Description
LCD Module Specification
Fron
t
5-51
NHD-0216SZ LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.6 - V
Supply Voltage (3V) VDD 2.7 3.0 3.3 V
Supply Current (3V) IDD Ta=25 °C, VDD=3.0V - 1.5 2.0 mA
Supply for LCD (contrast 3V) VDD-Vo Ta=25 °C - 3.0 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9** - - V
“L” Level Output VOL - - 0.4** V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED=5.0V - 120 - mA
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED=5.0V - 25 30 mA
Backlight Supply Voltage (White 3V) VLED - 3.0 - V
Backlight Supply Current (White 3V) ILED VLED=3.0V - 25 30 mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V or 3V= +3.0V)
3 V0 Power supply for contrast (approx. 0.4V or 3V= 0V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+5.0V or +3.0V via on-board resistor)
16 LED- Ground for Backlight
Pin Description
**For 3V display, level output voltage may vary.
Fron
t
5-52WWW.NEWHAVENDISPLAY.COM
NHD-0416BZ LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.6 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED=5.0V - 120 - mA
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED=5.0V - 20 - mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.4V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+5.0V via on-board resistor)
16 LED- Ground for Backlight
Pin Description
LCD Module Specification
Fron
t
5-53
NHD-0416B1Z LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 3.2 3.3 3.4 V
Supply Current IDD Ta=25 °C, VDD=3.3V - 1.5 3.0 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 3.3 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Pure Green) VLED - 5.0 - V
Backlight Supply Current (Pure Green) ILED VLED=5.0V - 20 - mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+3.3V)
3 V0 Power supply for contrast (approx. 0V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+5.0V via on-board resistor)
16 LED- Ground for Backlight
Pin Description
Fron
t
5-54WWW.NEWHAVENDISPLAY.COM
NHD-0220FZ LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 2.5 3.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 5.0 - V
Supply Voltage (3V) VDD 3.0 3.3 - V
Supply Current (3V) IDD Ta=25 °C, VDD=3.3V - 1.5 2.5 mA
Supply for LCD (contrast 3V) - 3.0 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9** - - V
“L” Level Output VOL - - 0.4** V
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED=5.0V - 20 - mA
Backlight Supply Voltage (White 3V) VLED - 3.3 - V
Backlight Supply Voltage (White 3V) ILED VLED=3.3V - 20 - mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V or 3V= +3.0V)
3 V0 Power supply for contrast (approx. 0V or 3V= 0.3V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+5.0V via on-board resistor or 3V= +3.3V)
16 LED- Ground for Backlight
Pin Description
4.0
8.0
**For 3V display, level output voltage may vary.
Fron
t
5-55
NHD-0220GZ LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.5 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 2.0 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.5 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED=5.0V - 120 - mA
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED=5.0V - 20 - mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. +0.5V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+5.0V via on-board resistor)
16 LED- Ground for Backlight
Pin Description
1 16
Fron
t
5-56WWW.NEWHAVENDISPLAY.COM
NHD-0220DZ LCD Module Specification
Electrical Characteristics
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.6 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED=5.0V - 150 - mA
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED=5.0V - 25 - mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.4V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+5.0V via on-board resistor)
16 LED- Ground for Backlight
Pin Description
LCD Module Specification
Fron
t
5-57
NHD-0220AZ
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.6 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED=5.0V - 150 300 mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.4V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+5.0V via on-board resistor)
16 LED- Ground for Backlight
Pin Description
LCD Module Specification
Fron
t
5-58WWW.NEWHAVENDISPLAY.COM
NHD-0220WH-M LCD Module Specification
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.5 5.0 5.5 V
Supply Current IDD Ta=25°C, VDD=5.0V 1.0 1.2 1.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C 3.8 4.5 5.5 V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL VSS - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - - 4.2 - V
Backlight Supply Current (Yellow/Green) ILED VLED=4.2V 240 300 450 mA
Backlight Supply Voltage (White) VLED 3.4 3.5 3.6 V
Backlight Supply Current (White) ILED VLED=3.5V 44 48 75 mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.5V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+3.5V or +4.2V)
16 LED- Ground for Backlight
Pin Description
146.0 0.53.5 139.0
18.0 P2.54*15=38.116- 1.0PTH16- 1.8PAD
118.84(AA)123.0(VA)
134.0
0.7
)A
A(79.81)
AV(0.328.33
1.5
8- 1.0
161
1.8 4- 3.5PTH
K
A0.630.345.0
0.91
0.310.11
6.55.3
5.2
13.5811.5
13.7Max9.1
1.6
DOT SIZESCALE 5/1
0.920.984.84
6.0
1.161.122.9
57.9
LCD Module Specification
Fron
t
5-59
NHD-0220WH-L
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD - 5.0 - V
Supply Current IDD Ta=25 °C, VDD=5.0V 1.2 1.6 2.0 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.5 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 4.2 4.6 V
Backlight Supply Current (Yellow/Green) ILED VLED=4.2V - 360 720 mA
Backlight Supply Voltage (White) VLED - 4.2 4.6 V
Backlight Supply Current (White) ILED VLED=4.2V - 50 75 mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.5V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+4.2V)
16 LED- Ground for Backlight
Pin Description
LCD Module Specification
91.04- 1.0
K
A
16 15
2 1
4- 3.5 PTH4- 6.5 PAD
4.9
32.0
4.0
13.0
13.5
5.0
11.7
172.04.0
180.0 0.5
40.0
0.5
36.4
1.8
23.0
(VA
)8.
520
.64(
AA
)9.
68161.410.3
149.0(VA)16.5142.8(AA)19.6
1.6
13.9 MAX9.3
16- 1.0 PTH16- 1.8 PAD
2.544.0
(P2.
54*8
)17
.78
9.84
PIN DETAIL
Fron
t
5-60WWW.NEWHAVENDISPLAY.COM
NHD-0220JZ
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.6 - V
“H” Level input VIH 0.7 VDD - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 3.9 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED=5.0V - 300 - mA
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED=5.0V - 60 - mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.4V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+5.0V via on-board resistor)
16 LED- Ground for Backlight
Pin Description
LCD Module SpecificationLCD Module Specification
Fron
t
5-61
NHD-0420H1Z LCD Module Specification
Pin No. Symbol Function Description
1 Vss Ground
2 VDD Supply Voltage for logic (+5.0V, 3V= +3.3V)
3 V0 Power supply for contrast (approx. 0.5V, 3V= 0.3V))
4 RS Register select signal. RS=0: Command. RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W:=0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED Backlight (+5.0V via on-board resistor. 3V= +3.3V)
16 LED- Ground for backlight
Pin Description
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD VDD=5.0V - 2.5 3.0 mA
Supply for LCD (contrast) VDD-V0 Ta=25oC - 4.5 - V
Supply Voltage (3V) VDD 3.0 3.3 3.5 V
Supply Current (3V) IDD VDD=3.3V - 4.0 5.0 mA
Supply for LCD (contrast 3V) VDD-V0 Ta=25oC - 3.0 - V
“H” Level input Vih 0.7 VDD - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 3.9 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (Yellow/Green 3V) VLED - 3.3 - V
Backlight Supply Current (Yellow/Green 3V) ILED VLED= 3.3V - 150 - mA
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED= 5.0V - 15 - mA
Backlight Supply Voltage (White 3V) VLED - 3.3 4.6 V
Backlight Supply Current (White 3V) ILED VLED= 3.3V - 12 - mA
Fron
t
SCALE=4.0:1
DOTS DETAIL
1
8
9
16
5-62WWW.NEWHAVENDISPLAY.COM
NHD-0420AZ LCD Module Specification
Electrical Characteristics
Pin DescriptionPin No. Symbol Function Description
1 Vss Ground
2 VDD Supply Voltage for logic (+3.0V)
3 V0 Power supply for contrast (approx. 0V)
4 RS Register select signal. RS=0: Command. RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W:=0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED Backlight (+3.0V)
16 LED- Ground for backlight
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 2.7 3.0 3.3 V
Supply Current IDD VDD=3.0V - 2.0 3.0 mA
Supply for LCD (contrast) VDD-V0 Ta=25oC - 3.0 - V
“H” Level input Vih 0.7 VDD - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 3.9 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 3.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED= 3.0V - 150 - mA
Backlight Supply Voltage (White) VLED - 3.0 - V
Backlight Supply Current (White) ILED VLED= 3.0V - 15 - mA
LCD Module Specification
Fron
t
5-63
NHD-0420DZ
LCD Module Specification
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.5 5.0 5.5 V
Supply Current IDD VDD=5.0V - 3.5 5.0 mA
Supply for LCD (contrast) VDD-V0 Ta=25oC - 4.5 - V
Supply Voltage (3V) VDD 3.0 3.3 3.5 V
Supply Current (3V) IDD VDD=3.3V - 2.0 3.0 mA
Supply for LCD (contrast 3V) VDD-V0 Ta=25oC 2.8 3.0 3.3 V
“H” Level input Vih 0.7 VDD - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 3.9** - - V
“L” Level Output Vol - - 0.4** V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED= 5.0V - 150 - mA
Backlight Supply Voltage (Yellow/Green 3V) VLED - 3.0 3.3 V
Backlight Supply Current (Yellow/Green 3V) ILED VLED= 3.0V - 240 - mA
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED= 5.0V - 20 30 mA
Pin No. Symbol Function Description
1 Vss Ground
2 VDD Supply Voltage for logic (+5.0V and 3V=+3.3V)
3 V0 Power supply for contrast (approx. 0.5V, 3V=+0.3V)
4 RS Register select signal. RS=0: Command. RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W:=0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED Backlight (+5.0V via on-board resistor, 3V=+3.0V )
16 LED- Ground for backlight
Pin Description
Electrical Characteristics
1 1614
9.3 0.5
2.5-
**For 3V display, level output voltage may vary.
Fron
t
5-64WWW.NEWHAVENDISPLAY.COM
NHD-0420E2Z LCD Module Specification
Electrical Characteristics
Pin DescriptionPin No. Symbol Function Description
1 Vss Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.5V)
4 RS Register select signal. RS=0: Command. RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W:=0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED Backlight (+5.0V via on-board resistor)
16 LED- Ground for backlight
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.5 5.0 5.5 V
Supply Current IDD VDD=5.0V 1.0 1.7 2.0 mA
Supply for LCD (contrast) VDD-V0 Ta=25oC 4.2 4.5 - V
“H” Level input Vih 0.7 VDD - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 3.9 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED= 5.0V - 240 - mA
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED= 5.0V - 65 - mA
mmUNIT:
PITCH
LCD Module Specification
Fron
t
5-65
NHD-0224BZ LCD Module Specification
Electrical Characteristics
Pin DescriptionPin No. Symbol Function Description
1 Vss Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.4V)
4 RS Register select signal. RS=0: Command. RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W:=0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED Backlight (+5.0V via on-board resistor)
16 LED- Ground for backlight
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-V0 Ta=25oC - 4.6 - V
“H” Level input Vih 0.7 VDD - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 3.9 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED= 5.0V - 120 - mA
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED= 5.0V - 20 - mA
Fron
t
5-66WWW.NEWHAVENDISPLAY.COM
NHD-0224BZ1 LCD Module Specification
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-V0 Ta=25oC - 4.5 - V
“H” Level input Vih 0.7 VDD - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 3.9 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED= 5.0V - 32 50 mA
Pin No. Symbol Function Description
1 Vss Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.5V)
4 RS Register select signal. RS=0: Command. RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W:=0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED Backlight (+5.0V via on-board resistor)
16 LED- Ground for backlight
Pin Description
Electrical Characteristics
LCD Module Specification
Fron
t
5-67
NHD-0224AZ
AK
LCD Module Specification
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-V0 Ta=25oC - 4.6 - V
“H” Level input Vih 0.7 VDD - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 3.9 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED= 5.0V - 20 - mA
Pin No. Symbol Function Description
1 Vss Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.4V)
4 RS Register select signal. RS=0: Command. RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W:=0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED Backlight (+5.0V via on-board resistor)
16 LED- Ground for backlight
Pin Description
Electrical Characteristics
Fron
t
5-68WWW.NEWHAVENDISPLAY.COM
NHD-0224WH-A LCD Module Specification
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.5 5.0 5.5 V
Supply Current IDD VDD=5.0V 1.0 1.2 1.5 mA
Supply for LCD (contrast) VDD-V0 Ta=25oC 3.8 4.5 5.5 V
“H” Level input Vih 0.7 VDD - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 3.9 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (White) VLED 3.4 3.5 3.6 V
Backlight Supply Current (White) ILED VLED= 3.5V 28.8 32 50 mA
Pin No. Symbol Function Description
1 Vss Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.5V)
4 RS Register select signal. RS=0: Command. RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W:=0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED Backlight (+3.5V)
16 LED- Ground for backlight
Pin Description
Electrical Characteristics
118.0 0.5
102.5
88.3(AA)
36.0
0.5
4-
PTH
4- 5.0 PAD
17.614.5 94.5(VA)
12.2
511
.5(A
A)
10.0
16.0
(VA
)3.
628
.8
31.0
2.5
10.5113.02.5
17.7
87.
84
16-1 .0 PTH16- 1.8 PAD
PIN DETAIL
2.54
2.5
(P2.
54*7
)
SCALE 1/ 1
13.6 MAX9.0
1.6
LCD Module Specification
Fron
t
2.5
5-69
NHD-0240AZ
LCD Module Specification
Electrical Characteristics
Pin DescriptionPin No. Symbol Function Description
1 VSS Ground
2 VDD Supply Voltage for logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.4V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write signal, R/W=1: Read R/W:=0: Write
6 E Operation enable signal. Falling edge triggered
7-10 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three-state data bus lines.
15 LED+ Power supply for LED backlight (+5.0V via on-board resistor)
16 LED- Ground for backlight
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-V0 Ta=25oC - 4.6 - V
“H” Level input Vih 0.7 VDD - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 3.9 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED= 5.0V - 120 - mA
Fron
t
5-70WWW.NEWHAVENDISPLAY.COM
NHD-0440AZ LCD Module Specification
Electrical Characteristics
Pin DescriptionPin No. Symbol Function Description
1-4 DB7-DB4 Four high order bi-directional three-state data bus lines.
5-8 DB3-DB0 Four low order bi-directional three-state bus lines. These four are not used during 4-bit operation.
9 E1 Operation enable signal. Falling edge triggered for top 2 lines.
10 R/W Read/Write select signal, R/W=1: Read R/W:=0: Write
11 RS Register select signal. RS=0: Command, RS=1: Data
12 V0 Power supply for contrast (approx. +0.5V)
13 Vss Ground
14 VDD Supply voltage for logic (+5.0V)
15 E2 Operation enable signal. Falling edge triggered for bottom 2 lines.
16 NC No Connect
17 LED+ Power supply for LED backlight (+5.0V with on-board resistor)
18 LED- Ground for backlight
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD VDD=5.0V - 3.5 4.0 mA
Supply for LCD (contrast) VDD-V0 Ta=25oC - 4.5 - V
“H” Level input Vih 0.7 VDD - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 3.9 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED= 5.0V - 360 480 mA
With LED BacklightWithout LED Backlight
LCD Module Specification
Fron
t
Fron
t
5-71
NHD-0440WH-A LCD Module Specification
Electrical Characteristics
Pin DescriptionPin No. Symbol Function Description
1-4 DB7-DB4 Four high order bi-directional three-state data bus lines.
5-8 DB3-DB0 Four low order bi-directional three-state bus lines. These four are not used during 4-bit operation.
9 E1 Operation enable signal. Falling edge triggered for top 2 lines.
10 R/W Read/Write select signal, R/W=1: Read R/W:=0: Write
11 RS Register select signal. RS=0: Command, RS=1: Data
12 V0 Power supply for contrast (approx. +0.5V)
13 Vss Ground
14 VDD Supply voltage for logic (+5.0V)
15 E2 Operation enable signal. Falling edge triggered for bottom 2 lines.
16 NC No Connect
17 LED+ Power supply for LED backlight (+3.5V)
18 LED- Ground for backlight
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.75 5.0 5.25 V
Supply Current IDD VDD=5.0V - 1.2 - mA
Supply for LCD (contrast) VDD-V0 Ta=25oC - 4.5 - V
“H” Level input Vih 0.7 VDD - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 3.9 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (White) VLED - 3.5 - V
Backlight Supply Current (White) ILED VLED= 3.5V 50 80 100 mA
183.0
190.0 0.5166.3
147.0(VA)
95.0
140.45(AA)
11.85
54.0
0.5
41.9
29.5
(VA
)23
.16(
AA
)
3.5
24.78
12.2
515
.42 21.5
6.05
3.52.5
21.0
16.5
7.0
23.5
4- 3.5 PTH4- 6.5 PAD
47.0
1.64- 1.0 PTH
9.013.6 MAX
PIN DETAIL
2.542.5
18.1
120
.32
18- 1.0 PTH18- 1.8 PAD
Fron
t
5-72WWW.NEWHAVENDISPLAY.COM
NHD-0216K3Z LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C,VDD=5.0V
- 125 - mA
Supply Current (RGB) IDD Ta=25 °C,VDD=5.0V
- 18 - mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - - - V
“H” Level input (Schmitt Trigger) Vih 0.8VDD - VDD V
“L” Level Input (Schmitt Trigger) Vil VSS - 0.2VDD V
“H” Level Output Voh - - - V
“L” Level Output Vol - - - V
Backlight Supply Current (White) ILED - 100 mA
Backlight Supply Current (Yellow-Green) ILED - 100 - mA
Backlight Supply Voltage (Red) VLED Ta=25 °C - 2.2 - V
Backlight Supply Current (Red) ILED VLED= 2.2V - 20 30 mA
Backlight Supply Voltage (Green) VLED Ta=25 °C - 3.3 - V
Backlight Supply Current (Green) ILED VLED= 3.3V - 20 30 mA
Backlight Supply Voltage (Blue) VLED Ta=25 °C - 3.3 - V
Backlight Supply Current (Blue) ILED VLED= 3.3V - 20 30 mA
Pin No. Symbol Function Description
1 RX RS232 Serial input port
2 VSS Ground
3 VDD Power supply for logic (+5.0V)
1 SPISS SPI Slave Select (NC in I2C mode)
2 SDO No Connect
3 SCK/SCL Serial Clock
4 SDI-SDA Serial Data in (SPI)) / Serial Data (I2C)
Electrical Characteristics
P1 P2 J3
Scale: 4:1
Pin No. Symbol Function Description
5 VSS Ground
6 VDD Power Supply for logic (+5.0V)
1 K Ground for LED backlights
2 A-RED Power supply for Red LED (+2.2V)
3 A-GREEN Power supply for Green LED (+3.3V)
4 A-BLUE Power supply for Blue LED (+3.3V)
* Please note that for non-RGB displays pins 1-5 are No Connect
LCD Module Specification
Fron
t
5-73
NHD-0216B3Z
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C,VDD=5.0V
- 125 - mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - - - V
“H” Level input (Schmitt Trigger) Vih 0.8VDD - VDD V
“L” Level Input (Schmitt Trigger) Vil VSS - 0.2VDD V
“H” Level Output Voh - - - V
“L” Level Output Vol - - - V
Backlight Supply Current (Yellow-Green) ILED - 100 mA
Pin No. Symbol Function Description
1 RX RS232 Serial input port
2 VSS Ground
3 VDD Power supply for logic (+5.0V)
1 SPISS SPI Slave Select (NC in I2C mode)
2 SDO No Connect
3 SCK/SCL Serial Clock
4 SDI-SDA Serial Data in (SPI)) / Serial Data (I2C)
5 VSS Ground
6 VDD Power Supply for logic (+5.0V)
1 VPP No Connect
2 VDD No Connect
3 VSS No Connect
4 PA0 No Connect
5 PA1 No Connect
Electrical Characteristics
LCD Module Specification
P1 P2 J3
Scale: 4:1
Fron
t
5-74WWW.NEWHAVENDISPLAY.COM
NHD-0216S3Z
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C,VDD=5.0V
- 245 - mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - - - V
“H” Level input (Schmitt Trigger) Vih 0.8VDD - VDD V
“L” Level Input (Schmitt Trigger) Vil VSS - 0.2VDD V
“H” Level Output Voh - - - V
“L” Level Output Vol - - - V
Backlight Supply Current (Yellow-Green) ILED - 120 mA
Pin No. Symbol Function Description
1 RX RS232 Serial input port
2 VSS Ground
3 VDD Power supply for logic (+5.0V)
1 SPISS SPI Slave Select (NC in I2C mode)
2 SDO No Connect
3 SCK/SCL Serial Clock
4 SDI-SDA Serial Data in (SPI)) / Serial Data (I2C)
5 VSS Ground
6 VDD Power Supply for logic (+5.0V)
1 VPP No Connect
2 VDD No Connect
3 VSS No Connect
4 PA0 No Connect
5 PA1 No Connect
Electrical Characteristics
LCD Module Specification
P1 P2 J3
Scale: 4:1
LCD Module Specification
Fron
t
5-75
NHD-0220D3Z LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current (Yellow-Green) IDD Ta=25 °C, VDD=5.0V - 245 - mA
Supply Current (White) IDD Ta=25 °C, VDD=5.0V - 38 - mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - - - V
“H” Level input (Schmitt Trigger) Vih 0.8VDD - VDD V
“L” Level Input (Schmitt Trigger) Vil VSS - 0.2VDD V
“H” Level Output Voh - - - V
“L” Level Output Vol - - - V
Backlight Supply Current (Yellow-Green) ILED - 120 mA
Backlight Supply Current (White) ILED - 20 - mA
Pin No. Symbol Function Description
1 RX RS232 Serial input port
2 VSS Ground
3 VDD Power supply for logic (+5.0V)
4 NC No Connect
5 SPISS SPI Slave Select (NC in I2C mode)
6 SDO No Connect
7 SCK/SCL Serial Clock
8 SDI-SDA Serial Data in (SPI)) / Serial Data (I2C)
9 VSS Ground
10 VDD Power Supply for logic (+5.0V)
11 NC No Connect
12 VPP No Connect
13 VDD No Connect
14 VSS No Connect
15 PA0 No Connect
16 PA1 No Connect
Electrical Characteristics
Fron
t
5-76WWW.NEWHAVENDISPLAY.COM
NHD-0240BZ LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD - 12.0 - V
Supply Current IDD Ta=25 °C, VDD=12.0V - 30 40 mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - 4.5 - V
Pin No. Symbol Function Description
1 VSS Ground (0V)
2 RXT Receive data
3 CTS No Connect
4 TXD Transfer data
5 RTS No Connect
6 VSS Ground (0V)
7 +12V Power Supply for logic (+12.0V)
8 VSS Ground (0V)
Electrical Characteristics
LCD Module Specification
Front
5-77
NHD-0420D3Z
P1 P2 J3
LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current (Yellow-Green) IDD Ta=25 °C, VDD=5.0V - 245 - mA
Supply Current (White) IDD Ta=25 °C, VDD=5.0V - 65 - mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - 4.5 - V
“H” Level input (Schmitt Trigger) Vih 0.8VDD - VDD V
“L” Level Input (Schmitt Trigger) Vil VSS - 0.2VDD V
“H” Level Output Voh - - - V
“L” Level Output Vol - - - V
Backlight Supply Current (Yellow-Green) ILED - 120 mA
Backlight Supply Current (White) ILED - 20 - mA
Electrical Characteristics
Pin No. Symbol Function Description
1 RX RS232 Serial input port
2 VSS Ground
3 VDD Power supply for logic (+5.0V)
1 SPISS SPI Slave Select (NC in I2C mode)
2 SDO No Connect
3 SCK/SCL Serial Clock
4 SDI-SDA Serial Data in (SPI)) / Serial Data (I2C)
5 VSS Ground
6 VDD Power Supply for logic (+5.0V)
1 VPP No Connect
2 VDD No Connect
3 VSS No Connect
4 PA0 No Connect
5 PA1 No Connect
Fron
t
5-78WWW.NEWHAVENDISPLAY.COM
110
A K
LCD Module SpecificationNHD-C0216CZ
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage (3V) VDD 2.7 3.0 3.3 V
Supply Current (3V) IDD - 0.3 0.5 mA
Supply for LCD (contrast 3V) VDD-Vo Ta=25 °C - 5.5 - V
“H” Level input VIH 2.2 - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 2.4 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (White 3V) VLED - 3.0 - V
Backlight Supply Current (White 3V) ILED VLED=3.0V - 30 45 mA
Electrical Characteristics
Pin No. Symbol Function Description
1 RST External reset PIN. Must be fixed to VDD low active.
2 RS Select registers. 0: instruction; 1: data register
3 CSB Chip select in serial interface low active
4 SCL Serial clock
5 SI Input data
6 VSS Ground
7 VDD Power supply for logic for LCM(3.0V).
8 VOUT DC/DC voltage converter. 1uF capacitor to Vdd or Vss
9 C1+ For voltage booster circuit. External capacitor about 0.47uF-2.2uF
10 C1-
A LED+ Power supply for backlight
K LED- Power supply for backlight (3.0V)
Pin Description
LCD Module Specification
Fron
t
5-79
18.1
0.7
1.2
5.0±0.2
3.0±
0.3
5.0±
0.3
5.0±
0.2
1.4±
0.2
3.0±
0.5
A
K
5.2±0.2
LCD Module SpecificationNHD-C0216AZ
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C,VDD=5.0V - 1.0 1.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 4.7 - V
“H” Level input VIH 2.2 - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 2.4 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (White) VLED - 3.0 - V
Backlight Supply Current (White) ILED VLED=3.0V - 15 20 mA
Electrical Characteristics
Pin No. Symbol Function Description
1 Vss Ground
2 Vo Power supply for contrast (approx. 0.3V)
3 VDD Supply voltage for logic (5.0V)
4 Rs Register select signal. RS=0: Command, RS=1:Data
5 R/W Read/Write select signal, R/W=1: Read R/W=0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0-DB3 Four low order bi-directional three state data bus lines. These four are not used during 4-bit operation.
11-14 DB4-DB7 Four high order bi-directional three state data bus lines.
15 A Power supply four LED Backlight (3.0V)
16 K Ground for Backlight
Pin Description
With LED Backlight
Without LED Backlight
With LED Backlight
Without LED Backlight
Fron
t
Fron
t
5-80WWW.NEWHAVENDISPLAY.COM
NHD-C0216CU
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage (3V) VDD 2.7 3.0 5.5 V
Supply Current (3V) IDD Ta=25 °C,VDD=3.0V - - 1.0 mA
Supply for LCD (contrast 3V) VDD-Vo Ta=25 °C 4.8 5.0 5.2 V
“H” Level input VIH 0.7VDD - VDD V
“L” Level Input VIL - - 0.2VDD V
Backlight Supply Voltage (White 3V) VLED 2.8 3.2 3.4 V
Backlight Supply Current (White 3V) ILED VLED=3.2V - 20 35 mA
Electrical Characteristics
Pin No. Symbol Function Description
1 XRESET Active LOW Reset Signal
2 RS Register Select signal. RS=0: instruction; RS=1: data
3 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
4 E Operation enable signal. Falling edge triggered.
5-12 DB0-DB7 8-bit bi-directional data bus lines
13 Vss Ground
14 VDD Power supply for logic for LCD (3.0V)
15 VOUT DC/DC voltage converter. Connect to 1uF capacitor to VDD
16 CAP1P Voltage booster circuit. Connect to 0.47uF-2.2uF cap to PIN17.
17 CAP1N Voltage booster circuit. Connect to 0.47uF-2.2uF cap to PIN16.
A LED+ Power supply for backlight (3.2V)
K LED- Backlight Ground
Pin Description
LCD Module Specification
Without LED BacklightWith LED Backlight
550.005.0 05.0-2
5.50
0.5
55.0 5+7.0
19.90+0.5
LCD Module Specification
Fron
t Fron
t
07.9425
.30 18
.30
14.3
0V.A
. MIN
11.3
2 A
.A.
M07.54 .A.VNI
.A.A68.243.
492.00
MA
X2.00MAX
24.3
1.0
0 +0.42=)1-71(*5.1P 3.0
58.21
00.65 )LB(3.0
18.0
00.
3(B
L)
EPAT
+
+
+
SILICONE
0 7. 0 70.0.0 70.007
M00.2 AX
.200.8 0
2307TS
0.30
0.0
5
5.5 5.0 05.3
+A-K
+
+
+
TAPE 15.2
0 0
.52.
50
5-81
LCD Module SpecificationNHD-C0216CiZ
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 2.7 3.0 3.3 V
Supply Current IDD Ta=25 °C,VDD=3.0V - 0.3 0.5 mA
Supply for LCD (contrast) VDD-Vo Ta=25 °C - 5.0 - V
“H” Level input VIH 2.2 - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 2.4 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (White) VLED - 3.0 - V
Backlight Supply Current (White) ILED VLED=3.0V - 15 20 mA
Electrical Characteristics
Pin No. Symbol Function Description
1 RST Active low Reset
2 SCL Serial clock
3 SDA Serial Data
4 Vss Ground
5 VDD Power supply for logic for LCD (3.0V)
6 VOUT Voltage booster circuit- connect to 1uF cap to Vss or VDD
7 C1+ Voltage booster circuit- Connect to 1uF cap to PIN8
8 C1- Voltage booster circuit- Connect to 1uF cap to PIN7
A LED+ Power supply for backlight (3.0V)
K LED- Backlight Ground
Pin Description
Without LED BacklightWith LED Backlight
Without LED Backlight
With LED Backlight
±
Fron
t
Fron
t
5-82WWW.NEWHAVENDISPLAY.COM
NHD-C0220AA LCD Module Specification
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 25 +70 °C
Storage Temperature Range Tst Absolute Max -30 25 +80 °C
Supply Voltage VDD 3.2 3.3 3.4 V
Supply Current IDD VDD=3.3V - - 1.0 mA
Supply for LCD (contrast) VLCD VLCD=VDD-V5 3.1 3.2 3.3 V
“H” Level input Vih 0.8VDD VDD V
“L” Level Input Vil 0 0.2VDD V
“H” Level Output Voh VDD-0.6 V
“L” Level Output Vol GND+0.6 V
Backlight Supply Voltage (White) VLED 3.0 3.1 3.2 V
Backlight Supply Current (White) ILED VLED=3.1V 30 40 60 mA
Electrical Characteristics
Pin No. Symbol Function Description
1 GND Ground
2 V5 Contrast voltage adjustment (~0.1V)
3 VDD VDD=3.3V
4 RS Register Select: 0= Instruction, 1=Data
5 R/W Read/Write select: 0=Write, 1=Read
6 E Read/Write start signal (Schmitt trigger input)
7-10 D80-D83 Low 4 tri-state bi-directional data bus lines. Not used in 4-bit mode.
11-14 D84-D87 High 4 tri-state bi-directional data bus lines.
Pin Description
LCD Module Specification
Fron
t
5-83
NHD-C0220AZ
)A,A(5.85
)A,V(0.16
596 2.0
11.6(
A,A
)
15.1(V
,A)
25.0
0.2
57.12 01
0.62=31*0.2HCTIP
2*1.1
8.2 XAM
0.7
141
01xaM
6.0-29.0
5.47 50
5.0
0.3
25
8.5
2-1.5
4.0
0.5
A
K
18.5
0.2
159
.25
18.5
Max.7.0
3V
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD Ta =25 °C 3.3 5.0 5.5 V
Supply Current IDD VDD=5.0V - 1.0 1.5 mA
Supply for LCD (contrast) VDD-V5Ta =0° - 4.5 -
VTa =25° - 4.4 -
Ta =60° - 4.3 -
“H” Level input Vih 2.2 - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 2.4 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (White) VLED - 3.0 - V
Backlight Supply Current (White) ILED VLED=3.0V - 30 45 mA
Electrical Characteristics
Pin No. Symbol Function Description
1 GND Ground
2 V5 Contrast voltage adjustment (~0.4V)
3 VDD Power Supply for LCD and logic
4 RS Register Select: 0= Instruction, 1=Data
5 R/W Read/Write select: 0=Write, 1=Read
6 E Read/Write start signal (Schmitt trigger input)
7-10 D80-D83 Low 4 tri-state bi-directional data bus lines. Not used in 4-bit mode.
11-14 D84-D87 High 4 tri-state bi-directional data bus lines.
Pin Description
LCD Module Specification
SILICONE
IC: 7605H-BDT010.30
(SE
CT
ION
0.3
0*0.
50)
Fron
t
5-84WWW.NEWHAVENDISPLAY.COM
LCD Module SpecificationNHD-C0220BiZ
RKGKBK
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage (3V) VDD 2.7 3.3 3.5 V
Supply Current (3V) IDD VDD=3.3V - 1.0 - mA
Supply for LCD (contrast 3V) VDD-V0 VLCD=VDD-V0 2.7 7.0 V
“H” Level input Vih 0.7VDD - VDD V
“L” Level Input Vil 0 - 0.8 V
“H” Level Output Voh 0.7VDD - VDD V
“L” Level Output Vol - - 0.8 V
Backlight Supply Voltage (White 3V) VLED 2.8 3.0 3.0 V
Backlight Supply Current (White 3V) ILED VLED= 3.0V - 30 45 mA
Backlight Supply Voltage (Red 3V) VLED - 1.9 - V
Backlight Supply Current (Red 3V) ILED VLED= 1.9V - 17 30 mA
Backlight Supply Voltage(Green 3V) VLED - 3.0 - V
Backlight Supply Current (Green 3V) ILED VLED= 3.0V - 17 30 mA
Backlight Supply Voltage (Blue 3V) VLED - 3.0 - V
Backlight Supply Current (Blue 3V) ILED VLED= 3.0V - 10 30 mA
Pin No. Symbol Function Description
1 RST Active LOW reset
2 SCL Serial clock (requires pull-up resistor)
3 SDA Serial data (requires pull-up resistor)
4 VSS Ground
5 VDD +3.3V
6 VOUT Voltage booster circuit-connect to 1uF cap to VSS or VDD
7 C1+ Connect to 1uF cap to Pin 8
8 C1- Connect to 1uF cap to Pin 7
Pin Description
Electrical Characteristics
8.5
1.5
K
With LED BacklightWith RGB LED Backlight
With RGB LED and LED Backlight
LCD Module Specification
Fron
t
Fron
t
5-85
NHD-C12832A1Z
171
A K
LCD Module Specification
Pin DescriptionPin No. Symbol Function Description
1 V0 0.4uF-2.2uF Cap to Vss
2 V1 0.4uF-2.2uF Cap to Vss
3 V2 0.4uF-2.2uF Cap to Vss
4 V3 0.4uF-2.2uF Cap to Vss
5 V4 0.4uF-2.2uF Cap to Vss
6 C2- Connect to 1uF Cap to C2+ (pin7)
7 C2+ Connect to 1uF Cap to C2- (pin6)
8 C1+ Connect to 1uf Cap to C1- (pin 9)
9 C1- Connect to 1uF Cap to C1+ (pin 8)
10 VOUT Connect to 1uF cap to Vss (pin 11)
11 VSS Ground
12 VDD Power supply for LCD and logic (+3V)
13 SDA (SI) Serial data
14 SCL Serial clock
15 A0 Select registers. 0: instruction, 1: data register
16 RST External reset PIN. Must be fixed to VDD low active.
17 CS1B Chip select in serial interface low active
A LED+ Power supply for LED Backlight (+3V)
K LED- Ground for Backlight
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage (3V) VDD 2.7 3.0 3.3 V
Supply Current (3V) IDD Ta=25 °CVDD=3.0V
- 0.25 0.45 mA
Supply for LCD (contrast 3V) VDD-V0 Ta=25 °C - 6.0 - V
“H” Level input Vih 2.2 - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 2.4 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (White, Blue, Red 3V) VLED - 3.0 - V
Backlight Supply Current (White, Blue, Red 3V) ILED VLED=3.0V 20 30 45 mA
Fron
t
5-86WWW.NEWHAVENDISPLAY.COM
NHD-C12864HZ LCD Module Specification
Pin DescriptionPin No. Symbol Function Description
1 VDD Power supply for logic (+3.0V)
2 C86 Select MPU interface pin. C86=H: 6800;C86=L: 8080
3 VSS Ground
4 V0 1.0uF-2.2uF cap to VSS
5 V4 1.0uF-2.2uF cap to VSS
6 V3 1.0uF-2.2uF cap to VSS
7 V2 1.0uF-2.2uF cap to VSS
8 V1 1.0uF-2.2uF cap to VSS
9 C2- Connect to 1uF cap to CAP2+ (PIN 10)
10 C2+ Connect to 1uF cap to CAP2- (PIN 9)
11 C1+ Connect to 1uF cap to CAP1- (PIN 12)
12 C1- Connect to 1uF cap to CAP1+ (PIN 11) and CAP3+ (PIN 13)
13 C3+ Connect to 1uF cap to CAP1- (PIN 12)
14 Vout Connect to 1uF cap to CAP1- (PIN 12)
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range TOP Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -10 - +60 °C
Supply Voltage VDD 2.9 3.0 - V
Supply Current IDD Ta=25°C VDD=3.0V - 0.42 0.62 mA
Supply for LCD (contrast) VDD-V0 - 8.8 9.1 V
“H” Level input Vih 0.2VDD - VDD V
“L” Level Input Vil Vss - 0.2VDD V
“H” Level Output Voh 0.2DD - VDD V
“L” Level Output Vol Vss - 0.2VDD V
Pin No. Symbol Function Description
15 VSS Ground
16-23 DB7-DB0 8 bi-directional three-state data bus lines.
24 E Operation enable signal. Falling edge triggered
25 RW Read/write select signal. R/W=1:Read R/W=0:Write
26 RS Register select signal. RS=0: Command, RS=1: Data
27 /RESET Active LOW Reset signal
28 /CS Active HIGH chip select
A Power supply for LED Backlight (+3.0V)
K Ground for Backlight
LCD Module Specification
Fron
t
5-87
NHD-C12864B2Z
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD - 3.3 - V
Supply Current IDD Ta=25 °C,VDD=3.3V
- 0.5 - mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - 8.9 - V
“H” Level input Vih 0.7VDD - VDD V
“L” Level Input Vil 0 - 0.8 V
“H” Level Output Voh 0.7VDD - VDD V
“L” Level Output Vol - - 0.8 V
Electrical Characteristics
Pin No. Symbol Function Description
1 V0 CAP to VSS (0.1~1Uf)
2 V1 CAP to Vss (0.1~1Uf)
3 V2 CAP to VSS (0.1~1Uf)
4 V3 CAP to VSS (0.1~1Uf)
5 V4 CAP to VSS (0.1~1Uf)
6 C4+ No Connect
7 C2- CAP to PIN8 (1~2.2uF)
8 C2+ CAP to PIN7 (1~2.2uF)
9 C1+ CAP to PIN10 (1~2.2uF)
10 C1- CAP to PIN9 (1~2.2uF)
Pin Description
LCD Module Specification
Pin No. Symbol Function Description
11 C3+ CAP to PIN10 (1~2.2uF)
12 Vout CAP to VSS (1~2.2uF)
13 VDD Power Supply for logic
14 Vss Ground
15~22 DB7~DB0 This is an 8-bit-directional data bus.
23 /RD Active low Read signal
24 /WR Active low Write signal
25 A0 Register Select. 0: instruction; 1:data register
26 RESTB Active low Reset signal. (May tie to VDD)
27 CS1B Active low Chip Select. (May tie to VSS)
(ST7565R)
Fron
t
5-88WWW.NEWHAVENDISPLAY.COM
NHD-C12864GG LCD Module Specification
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD - 3.0 3.3 V
Supply Current IDD Ta=25 °C, VDD=3.0V - 0.5 - mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - 8.9 - V
“H” Level input Vih 0.8VDD - VDD V
“L” Level Input Vil Vss - 0.2VDD V
“H” Level Output Voh Vss - V
“L” Level Output Vol - - 0.2VDD V
Electrical Characteristics
Pin No. Symbol Function Description
1 ESD-GND
2 /CS1 Active LOW chip select
3 /RES Active LOW reset signal
4 A0 Register Select: 0 :instruction; 1: data register
5 /WR Active LOW Write signal
6 /RD Active LOW Read signal
7-14 D0-D7 This is an 8-bit-directional data bus
15 VDD Power supply for logic (3.0V)
16 VSS Ground
17 VOUT 1.0uF-2.2uF cap to VSS
18 C3+ 1.0uF-2.2uF cap to C1- (Pin-19)
19 C1- 1.0uF-2.2uF cap to C3+ (Pin-18) and C1+ (Pin-20)
Pin DescriptionPin No. Symbol Function Description
20 C1+ 1.0uF-2.2uF cap to C1- (Pin-19)
21 C2+ 1.0uF-2.2uF cap to C2- (Pin-22)
22 C3- 1.0uF-2.2uF cap to C2+ (Pin-21) and C4+ (Pin-23)
23 C4+ 1.0uF-2.2uF cap to C2- (Pin-22)
24 V4 0.1uF-1.0uF cap to VSS
25 V3 0.1uF-1.0uF cap to VSS
26 V2 0.1uF-1.0uF cap to VSS
27 V1 0.1uF-1.0uF cap to VSS
28 V0 0.1uF-1.0uF cap to VSS
29 ESD-GND
30 NC No Connect
LCD Module Specification
Fron
t
1.0 MAX
10.0 MA
X
1.0(MIN)(UNBENDABLE AREA)
2.1 MAX
DOUBLE SIDE TAPE BETWEEN FPC AND PLZ
5-89
NHD-C12864WC LCD Module Specification
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range TOP Absolute Max -20 - +70 °C
Storage Temperature Range TST Absolute Max -30 - +80 °C
Supply Voltage (3V) VDD 2.7 3.0 3.3 V
Supply Current (3V) IDD VDD=3.0V - - 0.5 mA
Supply for LCD (contrast 3V) VDD-V0 - - 10.3 - V
“H” Level input Vih 0.8*VDD - VDD V
“L” Level Input Vil Vss - 0.2*VDD V
“H” Level Output 0.8*VDD - VDD -
“L” Level Output Vss - 0.2*VDD -
Backlight Supply Voltage (White 3V) VLED - 3.0 - V
Backlight Supply Current (White 3V) ILED VLED=3.0V - 36 - mA
Electrical Characteristics
Pin No. Symbol Function Description
1 CS1B Active LOW chip select
2 /RES Active LOW Reset signal
3 A0 Register select signal. RS=0: Command, RS=1 Data
4 RW-WR Read/Write select signal. R/W=1:Read R/W=0:Write
5 E-RD Operation enable signal. Falling edge triggered.
6 DB0Parallel InterfaceDB0-DB7: Bi-directional 8-bit data bus
Serial Interface:DB0-DB5:No connect in serial modeDB6= Serial clock (SCL)DB7= Serial data input (SI)
7 DB1
8 DB2
9 DB3
10 DB4
11 DB5
12 DB6(SCL)
13 DB7(SI)
14 VSS Ground (reference for voltage step-up circuit)
15 VOUT Connect to 1uF cap to VSS (PIN-14)
16 C3+ Connect to 1uF cap to C1- (PIN-17)
Pin DescriptionPin No. Symbol Function Description
17 C1- Connect to 1uF cap to C3+ (PIN16) and C1+(PIN18)
18 C1+ Connect to 1uF cap to C1- (PIN-17)
19 C2+ Connect to 1uF cap to C2- (PIN-20)
20 C2- Connect to 1uF cap to C2+ (PIN-19)
21 VSS Ground
22 VDD Power supply for LCD and logic (+3.0V)
23 V4 1.0uF-2.2uF cap to VDD or VSS
24 V3 1.0uF-2.2uF cap to VDD or VSS
25 V2 1.0uF-2.2uF cap to VDD or VSS
26 V1 1.0uF-2.2uF cap to VDD or VSS
27 V0 1.0uF-2.2uF cap to VDD or VSS
28 VR No Connect
29 C86 Select MPU interface pin. C86=H:6800; C86=L:8080
30 PS Parallel/Serial select. PS=H: Parallel; PS= L: Serial
A Power supply for LED Backlight (+3.0V)
K Ground for Backlight
130
K
Contact Contact
**Mounting Tabs are optional
With Mounting Tabs Without Mounting Tabs
Fron
t
Fron
t
5-90WWW.NEWHAVENDISPLAY.COM
NHD-C12864LZ LCD Module Specification
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range TOP Absolute Max -20 - +70 °C
Storage Temperature Range TST Absolute Max -30 - +80 °C
Supply Voltage (3V) VDD 2.4 3.0 3.3 V
Supply Current (3V) IDD VDD=3.0V - 0.25 0.45 mA
Supply for LCD (contrast 3V) VDD-V0 - - 9.0 - V
“H” Level input Vih 0.8*VDD - VDD V
“L” Level Input Vil VSS - 0.2*VDD V
“H” Level Output 0.8*VDD - VDD -
“L” Level Output VSS - 0.2*VSS -
Backlight Supply Voltage (White 3V) VLED - 3.2 - V
Backlight Supply Current (White 3V) ILED VLED=3.2V - 80 - mA
Electrical Characteristics
Pin No. Symbol Function Description
1 /CS1 Active LOW chip select
2 /RES Active LOW Reset signal
3 A0 Register select signal. 0: instruction 1: Data register
4 /WR Read/Write select signal. R/W=1:Read R/W=0:Write
5 /RD Operation enable signal. Falling edge triggered.
6 DB0Parallel InterfaceDB0-DB7: Bi-directional 8-bit data bus
Serial Interface:DB0-DB5:No connect in serial modeDB6= Serial clock (SCL)DB7= Serial data input (SI)
7 DB1
8 DB2
9 DB3
10 DB4
11 DB5
12 DB6
13 DB7
14 VDD Power supply for LCD and logic (+3.0V)
15 VSS Ground
Pin DescriptionPin No. Symbol Function Description
16 VOUT Connect to 1uF cap to VSS
17 C3+ Connect to 1uF cap to C1- (PIN 18)
18 C1- Connect to 1uF cap to C3+ (PIN 17) and C1+(PIN 19)
19 C1+ Connect to 1uF cap to C1- (PIN 18)
20 C2+ Connect to 1uF cap to C2- (PIN 21)
21 C2- Connect to 1uF cap to C2+ (PIN 20)
22 V4 1.0uF-2.2uF cap to VSS
23 V3 1.0uF-2.2uF cap to VSS
24 V2 1.0uF-2.2uF cap to VSS
25 V1 1.0uF-2.2uF cap to VSS
26 V0 1.0uF-2.2uF cap to VSS
27 C86 Select MPU interface pin. C86=H:6800; C86=L:8080
28 PS Parallel/Serial select. PS=H: Parallel; PS= L: Serial
LCD Module Specification
Fron
t
5-91
NHD-C12864M1Z LCD Module Specification
Pin No. Symbol Function Description
16 VOUT Voltage booster circuit - connect to 1uF cap to Vss to VDD
17 CAP3- Connect to 1uF cap to CAP1+ (PIN-18)
18 CAP1+ Connect to 1uF cap to CAP1- (PIN19) and CAP3- (PIN 17)
19 CAP1- Connect to 1uF cap to CAP1+ (PIN-18)
20 CAP2- Connect to 1uF cap to CAP2+ (PIN-21)
21 CAP2+ Connect to 1uF cap to CAP2- (PIN-20)
22 V1 1.0uF-2.2uF cap to VSS
23 V2 1.0uF-2.2uF cap to VSS
24 V3 1.0uF-2.2uF cap to VSS
25 V4 1.0uF-2.2uF cap to VSS
26 V5 1.0uF-2.2uF cap to VSS
27 VR No Connect
28 C86 Select MPU interface pin. C86=H: 6800; C86=L: 8080
29 PS Parallel/Serial select. PS=H: Parallel; PS=L: Serial
30 /IRS This terminal selects the resistors for the V5 voltage level adjustment
Pin No. Symbol Function Description
1 /CSI Active LOW chip signal.
2 /RES Active LOW reset signal.
3 A0 Register select signal. 0: instruction; 1: data register
4 /R/W;/WR
Read/Write select signal. R/W=1: Read R/W=0: Write
5 EP;/RD Operation enable signal. Falling edge triggered.
6 DB0Parallel interfaceDB0-DB7: Bi-directional 8-bit data bus.
Serial interface:DB0-DB5: No connect in serial modeDB6= Serial clock (CLK)DB7= Serial data input (SDA)
7 DB1
8 DB2
9 DB3
10 DB4
11 DB5
12 DB6;SCL
13 DB7;SI
14 VDD Power supply for LCD and logic (+3.3V)
15 VSS Ground
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range TOP Absolute Max -20 - +70 °C
Storage Temperature Range TST Absolute Max -30 - +80 °C
Supply Voltage (3V) VDD 3.0 3.3 3.5 V
Supply Current (3V) IDD Ta= 25 °C, VDD=3.3V - 0.35 0.45 mA
Supply for LCD (contrast 3V) VDD-V0 Ta= 25 °C - 9.5 - V
“H” Level input Vih 2.2 - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh LOH= -0.25mA 2.4 - - -
“L” Level Output Vol LOH= 1.6mA - - 0.4 -
Backlight Supply Voltage (White 6V) VLED - 6.0 - V
Backlight Supply Current (White 6V) ILED VLED=6.0V - 30 45 mA
Pin Description
Electrical Characteristics
Fron
t
1.1
1.1
1.1
K
A
A
K
com0
com63
COM & SEG LAYOUT
seg0 - - - seg127
- -
5-92WWW.NEWHAVENDISPLAY.COM
NHD-C12864CR LCD Module Specification
Pin Description
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range TOP Absolute Max -20 - +70 °C
Storage Temperature Range TST Absolute Max -30 - +80 °C
Supply Voltage VDD 2.7 3.0 3.3 V
Supply Current IDD Ta= 25 °C, VDD=3.0V - - 0.5 mA
Supply for LCD (contrast) VDD-V0 Ta= 25 °C - 9.5 - V
“H” Level input Vih 0.8*VDD - VDD V
“L” Level Input Vil VSS - 0.2*VDD V
“H” Level Output Voh 0.8*VDD - VDD V
“L” Level Output Vol VSS - 0.2*VDD V
Backlight Supply Voltage (White) VLED - 3.2 - V
Backlight Supply Current (White) ILED VLED=3.2V - 60 80 mA
Pin No. Symbol Function Description
1 /CS1 Active Low chip select
2 /RES Active Low reset signal.
3 A0 Register select signal. 0: instruction; 1:data
4 /WR Read/Write select signal. R/W=1: Read R/W=0: Write.
5 /RD Operation enable signal. Falling edge triggered.
6 DB0Parallel interfaceDB0-DB7: Bi-directional 8-bit data bus.
Serial interface:DB0-DB5: No connect in serial modeDB6= Serial clock (CLK)DB7= Serial data input (SDA)
7 DB1
8 DB2
9 DB3
10 DB4
11 DB5
12 DB6
13 DB7
14 VDD Power supply for LCD and logic (+3.3V)
15 VSS Ground
16 VOUT Connect to 1uF cap to VSS
17 CAP3- Connect to 1uF cap to CAP1+ (PIN 18)
Pin No. Symbol Function Description
18 CAP1+ Connect to 1uF cap to CAP3- (PIN17) and CAP1- (PIN 19)
19 CAP1- Connect to 1uF cap to CAP1+ (PIN 18)
20 CAP2- Connect to 1uF cap to CAP2+ (PIN-21)
21 CAP2+ Connect to 1uF cap to CAP2- (PIN 20)
22 V1 1.0uF-2.2uF cap to VSS
23 V2 1.0uF-2.2uF cap to VSS
24 V3 1.0uF-2.2uF cap to VSS
25 V4 1.0uF-2.2uF cap to VSS
26 V5 1.0uF-2.2uF cap to VSS
27 VR No Connect
28 C86 Select MPU interface pin. C86=H: 6800; C86=L: 8080
29 PS Parallel/Serial select. PS=H: Parallel; PS=L: Serial
30 /IRS Internal resistor select (high to use internal resistors)
A Power supply for LED Backlight (+3.0V)
K Ground for Backlight
NHD-C12864CR-FSW-GBW
LCD Module Specification
Fron
t
5-93
NHD-C12864AZ LCD Module Specification
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range TOP Absolute Max -20 - +70 °C
Storage Temperature Range TST Absolute Max -30 - +80 °C
Supply Voltage VDD 2.4 3.3 3.3 V
Supply Current IDD Ta =25 °C, VDD=5.0V - - 147 uA
Supply for LCD (contrast) VDD-V0 Ta =25 °C 8.3 8.7 9.3 V
“H” Level input Vih 2.2 - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 2.4 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 4.2 - V
Backlight Supply Current (Yellow/Green) ILED VLED=4.2V - 80 130 mA
Heater Panel Resistance RH+/- - 20 25 Ω
Heater Voltage Supply VH - 12V - V
Heater Current IH VH=12.0V - 1 - A
Electrical Characteristics
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Power supply for LCD and logic (+3.3V)
3 NC No Connect
4 /RES Operation Active LOW reset signal
5 /CS Active LOW chips select signal
6 A0 Register select. 0: instruction; 1:data
7-14 VDD Power supply for LCD and logic (+3.3V)
15 SCL Serial clock input
16 SI Serial data input
17 A Power supply for backlight (+5V with on-board 6.8ohm)
18 K Ground for backlight.
Pin Description
Fron
t
5-94WWW.NEWHAVENDISPLAY.COM
NHD-C12864A1Z LCD Module Specification
Pin DescriptionPin No. Symbol Function Description
1 SCL Serial clock input
2 SI Serial data input
3 VDD Power supply for LCD and logic (+3.3V)
4 A0 Register select. 0: instruction; 1: data
5 /RESET Operation Active LOW reset signal
6 /CS Active LOW chip select signal
Electrical Characteristics
Pin No. Symbol Function Description
7 Vss Ground
8 H- Ground for heater
9 H+ Power for heater (+12V)
10 LED- Ground for backlight
11 LED+ Power supply for LED backlight (+3.3V)
12 NC No Connect
128x64 DOTS
1 6 7 12
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range TOP Absolute Max -40 - +70 °C
Storage Temperature Range TST Absolute Max -30 - +80 °C
Supply Voltage VDD 2.4 3.3 3.3 V
Supply Current IDD Ta =25 °C, VDD=3.3V - 0.005 - mA
Supply for LCD (contrast) VDD-V0 Ta =25 °C 8.3 8.7 9.3 V
“H” Level input Vih 2.2 - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 2.4 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (RED) VLED - 3.3 - V
Backlight Supply Current (RED) ILED VLED=3.3V - 60 75 mA
Backlight Supply Voltage (BLUE) VLED - 3.3 - V
Backlight Supply Current (BLUE) ILED VLED=3.3V - 50 60 mA
Backlight Supply Voltage (White) VLED - 3.3 - V
Backlight Supply Current (White) ILED VLED=3.3V - 50 60 mA
Heater Panel Resistance RH+/- - 20 25 Ω
Heater Voltage Supply VH - 12V - V
Heater Current IH VH=12.0V - 1 - A
LCD Module Specification
Fron
t
5-95
NHD-C12864A1Z (RGB) LCD Module Specification
Pin DescriptionPin No. Symbol Function Description
1 H- Ground for Heater
2 SCL Serial clock input
3 SI Serial data input
4 VDD Power supply for LCD and logic (+3.3V)
5 A0 Register select. 0: instruction; 1: data
6 /RESET Operation Active LOW reset signal
7 /CS Active LOW chip select signal
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range TOP Absolute Max -40 - +70 °C
Storage Temperature Range TST Absolute Max -30 - +80 °C
Supply Voltage VDD 2.4 3.3 3.3 V
Supply Current IDD Ta =25 °C, VDD=3.3V - 0.005 - mA
Supply for LCD (contrast) VDD-V0 Ta =25 °C 8.3 8.7 9.3 V
“H” Level input Vih 2.2 - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 2.4 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (RED) VLED - 3.3 - V
Backlight Supply Current (RED) ILED VLED=3.3V 25 30 35 mA
Backlight Supply Voltage (GREEN) VLED - 3.3 - V
Backlight Supply Current (GREEN) ILED VLED=3.3V 20 25 30 mA
Backlight Supply Voltage (BLUE) VLED - 3.3 - V
Backlight Supply Current (BLUE) ILED VLED=3.3V 20 25 30 mA
Heater Panel Resistance RH+/- - 20 25 Ω
Heater Voltage Supply VH - 12V - V
Heater Current IH VH=12.0V - 1 - A
Electrical Characteristics
Pin No. Symbol Function Description
8 Vss Ground
9 NC No Connect
10 K-RED Cathode Red
11 K-GREEN Cathode Green
12 K-BLUE Cathode Blue
13 LED+ Common Anode for LEDs (+3.3V)
14 H+ Power for Heater (+12V)
Fron
t
5-96WWW.NEWHAVENDISPLAY.COM
NHD-C12864WO LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range TOP Absolute Max -20 - +70 °C
Storage Temperature Range TST Absolute Max -30 - +80 °C
Supply Voltage VDD 3.0 3.3 3.6 V
Supply Current IDD Ta =25 °C, VDD=3.3V - 0.6 2.0 mA
Supply for LCD (contrast) VDD-V0 Ta =25 °C 9.2 9.45 9.7 V
“H” Level input Vih 0.8 - VDD V
“L” Level Input Vil VSS - 0.2VDD V
“H” Level Output Voh 0.8 - VDD V
“L” Level Output Vol VSS - 0.2VDD V
Backlight Supply Voltage (White) VLED 3.4 3.5 3.6 V
Backlight Supply Current (White) ILED VLED=3.5V 61.2 72 100 mA
Electrical Characteristics
Pin No. Symbol Function Description
1 /CS1 B Active Low chip select
2 /RES Active Low reset signal
3 A0 Register select signal. 0: instruction; 1:data
4 /WR (R/W) Read/Write select signal. R/W=1: Read R/W=0: Write.
5 /RD (E) Operation enable signal. Falling edge triggered.
6-13 D0~D7 This is an 8-bit-directional data busIn serial mode D6= Serial data clock signal inputIn serial mode D7= Serial data input
14 VDD Power supply for LCD and logic (+3.3V)
15 VSS Ground
16 VOUT 2.2uF cap to VSS
17 C3+ 2.2uF cap to C1-(pin-18)
18 C1- 2.2uF cap to C3+ (pin-17) and C1+ (pin-19)
Pin No. Symbol Function Description
19 C1+ 2.2uF cap to C1- (pin-18)
20 C2+ 2.2uF cap to C2- (pin-21)
21 C2- 2.2uF cap to C2+ (pin-20)
22 V1 2.2uF cap to VDD
23 V2 2.2uF cap to VDD
24 V3 2.2uF cap to VDD
25 V4 2.2uF cap to VDD
26 V5 2.2uF cap to VDD
27 VR Wiper of 10kΩ pot
28 C86 Select MPU interface pin. C86= H:6800; C86= L:8080
29 P/S Parallel/Serial select. PS= H: Parallel; PS= L: Serial
30 NC No Connect
8. 35 73 .0 (L CD )
100.
0±0.
3
49.8
±0.5
1.15
8.15
47.5
(LC
D)
40.5
10.0
36.5
(VA
)
13.0
0531
.97(
AA
)
15 .5 ±0 .1 530 .1
301
89 .73. 5 82 .7
3. 355. 86 5
69 .0 (V A)63 .9 7( AA )
CN 2
1
9.6
30.6
130
100.
0±10
.0
4.8
40.2
3. 582 .74- O 3. 2 PT H
2 1
CN 2
6. 0± 0. 3
1. 9
0. 3± 0. 15
DO T SI ZESC AL E 10 /1
0. 47
0. 5
0.470.5
8.0
4.0
15 .5P0 .5 *2 9=14 .5
w= 0. 3Co nt ac t Si deSC AL E 2/ 1
LCD Module Specification
Fron
t
5-97
NHD-C12865AZ LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD - 5.0 - V
Supply Current IDD Ta =25 °C,VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-V0 Ta =25 °C - 9.5 10 V
“H” Level input Vih 2.2 - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 2.4 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (White) VLED - 3.2 - V
Backlight Supply Current (White) ILED VLED=3.2V - 45 60 mA
Electrical Characteristics
Pin No. Symbol Function Description
1 /CS1 Active LOW chip select
2 /RESET Active LOW reset signal
3 A0 Register select signal. A0=1: Data, A0=0: Command
4 /RW Read/Write select signal., R/W=1: Read R/W=0: Write
5 E Operation enable signal. Falling edge triggered.
6 DB0 Parallel interface
7 DB1 DB0-DB7: Bi-directional 8-bit data bus
8 DB2
9 DB3 Serial interface:
10 DB4 DB0-DB5: No connect in serial mode
11 DB5
12 DB6 DB6= Serial clock (CLK)
13 DB7 DB7= Serial data input (SDA)
14 VDD Power supply for LCD and logic (+3.3V)
15 Vss Ground
16 VOUT Voltage booster circuit - connect to 1uF cap to Vss or VDD
Pin No. Symbol Function Description
17 CAP3- Connect to 1uF cap to CAP1+ (PIN 18)
18 CAP1+ Connect to 1uF cap to CAP1- (PIN 19) and CAP3-(PIN17)
19 CAP1- Connect to 1uF cap to CAP1+ (PIN 18)
20 CAP2- Connect to 1uF cap to CAP2+ (PIN 21)
21 CAP2+ Connect to 1uF cap to CAP2- (PIN 20)
22 V1 1.0uF-2.2uF cap to VSS
23 V2 1.0uF-2.2uF cap to VSS
24 V3 1.0uF-2.2uF cap to VSS
25 V4 1.0uF-2.2uF cap to VSS
26 V5 1.0uF-2.2uF cap to VSS
27 VR No connect
28 C86 Select MPU interface pin. C86= H:6800; C86= L:8080
29 PS Parallel/Serial select. PS= H: Parallel; PS= L: Serial
30 IRS This terminal selects the resistors for the V5 voltage level adjustment.
Fron
t
5-98WWW.NEWHAVENDISPLAY.COM
NHD-C12865BZ
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.0 5.0 5.5 V
Supply Current IDD Ta =25 °C,VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-V0 Ta =25 °C - 9.5 - V
“H” Level input Vih 2.2 - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 2.4 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (White) VLED - 3.2 - V
Backlight Supply Current (White) ILED VLED=3.2V - 60 75 mA
Electrical Characteristics
Pin No. Symbol Function Description
1 /CS1 Active LOW chip select
2 /RESET Active LOW reset signal
3 A0 Register select signal. A0=1: Data, A0=0: Command
4 /RW Read/Write select signal., R/W=1: Read R/W=0: Write
5 E Operation enable signal. Falling edge triggered.
6 DB0 Parallel interface
7 DB1 DB0-DB7: Bi-directional 8-bit data bus
8 DB2
9 DB3 Serial interface:
10 DB4 DB0-DB5: No connect in serial mode
11 DB5
12 DB6 DB6= Serial clock (CLK)
13 DB7 DB7= Serial data input (SDA)
14 VDD Power supply for LCD and logic (+5.0V)
15 Vss Ground
16 VOUT Voltage booster circuit - connect to 1uF cap to Vss or VDD
Pin No. Symbol Function Description
17 CAP3- Connect to 1uF cap to CAP1+ (PIN 18)
18 CAP1+ Connect to 1uF cap to CAP1- (PIN 19) and CAP3-(PIN17)
19 CAP1- Connect to 1uF cap to CAP1+ (PIN 18)
20 CAP2- Connect to 1uF cap to CAP2+ (PIN 21)
21 CAP2+ Connect to 1uF cap to CAP2- (PIN 20)
22 V1 1.0uF-2.2uF cap to VSS
23 V2 1.0uF-2.2uF cap to VSS
24 V3 1.0uF-2.2uF cap to VSS
25 V4 1.0uF-2.2uF cap to VSS
26 V5 1.0uF-2.2uF cap to VSS
27 VR No connect
28 C86 Select MPU interface pin. C86= H:6800; C86= L:8080
29 PS Parallel/Serial select. PS= H: Parallel; PS= L: Serial
30 IRS This terminal selects the resistors for the V5 voltage level adjustment.
LCD Module SpecificationLCD Module Specification
Fron
t
5-99
LCD Module SpecificationNHD-C128128BZ
Pin No. Symbol Function Description
1 PS0 Parallel/serial data input select input (see Parallel/Serial Select table)2 PS1
3 PS2
4 CSB Active LOW Chip select
5 RST Active LOW Reset signal
6 A0 Register select signal. A0=1:Data, A0=0:Command
7 RW(WR) Read/Write select signal, R/W=1:Read R/W=0 Write
8 E(RD) Operation enable signal. Falling edge triggered
9-16 DB0-DB7 Bi-directional, three-state data bus lines
17,18 VDD Supply Voltage for logic (3.0V)
19,20 Vss Ground
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD - 3.0 - V
Supply Current IDD Ta=25 °C,VDD=3.0V
- 1.5 2.5 mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - 13.5 - V
“H” Level input Vih 2.2 - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 2.4 - - V
“L” Level Output Vol - - 0.4 V
Backlight supply voltage (White) VLED 3.0 - V
Backlight supply current (White) ILED VLED=3.0V - 60 75 mA
Pin DescriptionPin No. Symbol Function Description
21 VOUT Voltage booster circuit- connect to 1uF cap to Vss or VDD
22 VIN Tie to VOUT
23 V4 1.0uF-2.2uF cap to VSS
24 V3 1.0uF-2.2uF cap to VSS
25 V2 1.0uF-2.2uF cap to VSS
26 V1 1.0uF-2.2uF cap to VSS
27 V0 1.0uF-2.2uF cap to VSS
28 VR No Connect
29 INTRS Internal resistor select pin: VDD=Enabled
30 NC No Connect
Fron
t
5-100WWW.NEWHAVENDISPLAY.COM
NHD-C160100AZ LCD Module Specification
Pin No. Symbol Function Description
1 CSB Active LOW chip select
2 RST Active LOW reset signal
3 A0 Register select signal. A0=1: Data, A0=0: Command
4 /WR Active LOW write signal
5 /RD Active LOW read signal
6-13 DB0-DB7 Bi-directional 8-bit data bus.
14 VDD Power supply for LCD and logic (+3.0V)
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -10 - +60 °C
Storage Temperature Range Tst Absolute Max -20 - +70 °C
Supply Voltage VDD 2.8 3.0 3.3 V
Supply Current IDD Ta=25 °C,VDD=3.0V
- 1.5 2.5 mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - 11.5 - V
“H” Level input Vih 2.2 - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 2.4 - - V
“L” Level Output Vol - - 0.4 V
Pin DescriptionPin No. Symbol Function Description
15 Vss Ground
16 VOUT Connect to 1uF cap to VSS or VDD
17 V4 1.0uF-2.2uF cap to Vss
18 V3 1.0uF-2.2uF cap to Vss
19 V2 1.0uF-2.2uF cap to Vss
20 V1 1.0uF-2.2uF cap to Vss
LCD Module Specification
Fron
t
5-101
NHD-C160100CZ LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 2.8 3.0 3.3 V
Supply Current IDD Ta=25 °C,VDD=3.0V
- 1.5 2.5 mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - 11.5 - V
“H” Level input Vih 2.2 - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 2.4 - - V
“L” Level Output Vol - - 0.4 V
Pin No. Symbol Function Description
1 CSB Active LOW chip select
2 RST Active LOW reset signal
3 A0 Register select signal. A0=1: Data, A0=0: Command
4 /WR Active LOW write signal
5 /RD Active LOW read signal
6-13 DB0-DB7 Bi-directional 8-bit data bus.
14 VDD Power supply for LCD and logic (+3.0V)
15 Vss Ground
16 VOUT Connect to 1uF cap to VSS or VDD
17 V4 1.0uF-2.2uF cap to Vss
18 V3 1.0uF-2.2uF cap to Vss
19 V2 1.0uF-2.2uF cap to Vss
20 V1 1.0uF-2.2uF cap to Vss
Electrical Characteristics
Fron
t
5-102WWW.NEWHAVENDISPLAY.COM
NHD-C160100DiZ LCD Module Specification
Pin DescriptionPin No. Symbol Function Description
1 CSB Active LOW chip select
2 RST Active LOW reset signal
3 NC No connect
4 SCL Serial clock input (requires pull-up)
5 SDA Serial data input (requires pull-up)
6 VDD Power supply for LCD and logic (+3.0V)
7 Vss Ground
8 VOUT Connect to 1uF cap to VSS or VDD
9 V4 1.0uF-2.2uF cap to Vss
10 V3 1.0uF-2.2uF cap to Vss
11 V2 1.0uF-2.2uF cap to Vss
12 V1 1.0uF-2.2uF cap to Vss
13 NC No connect
14 NC No connect
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -40 - +80 °C
Supply Voltage VDD 2.4 3.0 3.3 V
Supply Current IDD Ta=25 °C,VDD=3.0V
- 500 - uA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - 11.5 - V
“H” Level input Vih 2.2 - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 2.4 - - V
“L” Level Output Vol - - 0.4 V
Backlight supply voltage (White) VLED 3.0 - V
Backlight supply current (White) ILED VLED=3.0V - 45 60 mA
14 1
0 -0.2
160x100D OTS
WHITE LED BACKLIGHT
CONDUCT SIDE
STIFFENER
A-A
A-AKA
160x100
C159
C50
C49
C0
C99
C50
C49
C0
951S0S
S159S0
LCD Module Specification
Fron
t
5-103
NHD-C24064WO LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 2.7 3.0 3.3 V
Supply Current IDD Ta =25 °C, VDD=3.3V 281 337 338 uA
Supply for LCD (contrast) VDD-V0 Ta =25 °C 9.3 10 10.7 V
“H” Level input Vih 0.8VDD - VDD V
“L” Level Input Vil Vss - 0.2VDD V
“H” Level Output Voh 0.8VDD - VDD V
“L” Level Output Vol Vss - 0.2VDD V
Backlight Supply Voltage (White) VLED 3.4 3.5 3.6 V
Backlight Supply Current (White) ILED VLED=3.5V 80 100 150 mA
Electrical Characteristics
Pin No. Symbol Function Description
1 NC No connect
2 FR Alternating current signal (tie both FR pins together)
3 CL Clock input terminal (tie both CL pins together)
4 /DOF Blanking control output (tie both /DOF pins together)
5 /CS1 Active LOW chip select signal
6 CS2 Active HIGH chip select signal (can tie HIGH)
7 /RES Active LOW reset signal
8 A0 Register Select: 0:instruction; 1:data
9 /WR Active LOW write signal
10 /RD Active LOW read signal
11 DB0 Parallel interfaceDB0-DB7: Bi-directional 8-bit data bus
Serial interface:DB0-DB5: No connect in serial mode
DB6= Serial clock (CLK)DB7= Serial data input (SDA)
12 DB1
13 DB2
14 DB3
15 DB4
16 DB5
17 DB6
18 DB7
Pin No. Symbol Function Description
19 VDD Supply voltage for Logic (3.0V)
20 Vss Ground
21 Vout 1.0uF Cap to GND
22 C3- 1.0uF-2.2uF cap to C1+ (Pin-23)
23 C1+ 1.0uF-2.2uF cap to C3- (Pin-22) and C1- (Pin-24)
24 C1- 1.0uF-2.2uF cap to C1+ (Pin-23)
25 C2- 1.0uF-2.2uF cap to C2+ (Pin-26)
26 C2+ 1.0uF-2.2uF cap to C2- (Pin-25)
27 V1 1.0uF-2.2uF cap to VDD
28 V2 1.0uF-2.2uF cap to VDD
29 V3 1.0uF-2.2uF cap to VDD
30 V4 1.0uF-2.2uF cap to VDD
31 V5 1.0uF-2.2uF cap to VDD
32 VR No connection
33 C86 Select MPU interface pin. C86= H:6800; C86= L:8080
34 P/S Parallel/Serial select. PS= H: Parallel; PS = L: Serial
35 NC No connection
36 NC No connection
4.0675
4.02953.0
127.065(AA)2.5130.2 (V.A)
7.15 7.15142.5±0.3
135.2
2.7
3.02.5
3.0124.2
14.9
1.5
9.8
20.95
3.4
3.544.7
200.0±1.0
5.5
51.7±0.3
67.6
4-R1.0
240*64 DOTS
33.841(AA
)37.6(V
.A)
18.5
63.6
4-R0.3
35.8
CN1CN3
100.0±0.5
CN2
1.75.1
49.7
2.01.0
5.5
Fron
t
5-104WWW.NEWHAVENDISPLAY.COM
NHD-10032AZ
Electrical Characteristics
Pin DescriptionPin No. Symbol Function Description
1 VSS Ground
2 VDD Power supply for logic (+5.0V)
3 V0 Power supply for contrast (approx. -0.5V)
4 A0 Register select signal. A0=0: Command, A0=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E1 Operation enable signal. Falling edge triggered, SEG (1~60)
7 E2 Operation enable signal. Falling edge triggered, SEG (61~120)
8 NC No Connect
9-12 DB0-DB3 Four low order bi-directional three-state data bus lines. These four are not used during 4-bit operation.
13-16 DB4-DB7 Four high order bi-directional three-state data bus lines.
17 LED+ Power supply for LED backlight (+5.0V via on-board resistor)
18 LED- Ground for backlight
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD - 5.0 - V
Supply Current IDD VDD=5.0V - 2.0 2.5 mA
Supply for LCD (contrast) VDD-V0 Ta=25oC - 5.5 - V
“H” Level input Vih 2.2 - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 2.4 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (Pure Green) VLED - 5.0 - V
Backlight Supply Current (Pure Green) ILED VLED= 5.0V - 30 - mA
LCD Module SpecificationLCD Module Specification
Fron
t
5-105
NHD-12032B1Z
Electrical Characteristics
Pin DescriptionPin No. Symbol Function Description
1 VSS Ground
2 VDD Power supply for logic (+5.0V)
3 V0 Power supply for contrast (approx. -0.5V)
4 A0 Register select signal. A0=0: Command, A0=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0: Write
6 E1 Operation enable signal. Falling edge triggered, SEG (1~60)
7 E2 Operation enable signal. Falling edge triggered, SEG (61~120)
8 /RES Active LOW Reset signal
9-16 DB0-DB7 This is an 8-bit-directional data bus.
17 LED+ Power supply for LED backlight (+5.0V via on-board resistor)
18 LED- Ground for backlight
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD VDD=5.0V - 2.0 3.0 mA
Supply for LCD (contrast) VDD-V0 Ta=25oC - 5.5 - V
“H” Level input Vih 2.2 - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 2.4 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED= 5.0V - 30 - mA
LCD Module Specification
Fron
t
5-106WWW.NEWHAVENDISPLAY.COM
NHD-12232KZ
Electrical Characteristics
Pin DescriptionPin No. Symbol Function Description
1 A0 Register Select. 0: instruction; 1: data
2 /CS2 Active LOW Chip Select Signal for LEFT half of LCD
3 /CS1 Active LOW Chip Select Signal for RIGHT half of LCD
4 CL Clock Signal; Requires 2KHz external clock.
5 E Operation enable signal. Falling edge triggered.
6 /RW Read/Write select signal. R/W = 1: Read R/W = 0: Write
7 VSS Ground
8-15 DB0-DB7 This is an 8-bit Bi-directional data bus
16 VDD Power supply for logic (+5.0V)
17 /RES Active LOW Reset signal
18 V0 Power Supply for contrast; Requires external negative voltage (approx. -1.5V)
19 LED+ Power supply for LED backlight (+5.0V with on-board resistor)
20 LED- Ground for backlight
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD VDD=5.0V - 2.0 3.0 mA
Supply for LCD (contrast) VDD-V0 Ta=25 oC - 6.5 - V
“H” Level input Vih 2.2 - VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 2.4 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED= 5.0V - 45 - mA
LCD Module SpecificationLCD Module Specification
Fron
t
5-107
NHD-12232AZ LCD Module Specification
Electrical Characteristics
With Yellow/Green LED Backlight With White LED Backlight
Pin DescriptionPin No. Symbol Function Description
1 VSS Ground
2 VDD Power Supply for logic (+5.0V)
3 V0 Power Supply for contrast (approx. -1.5V)
4 RST Active LOW Reset signal
5 E1 Operation enable signal. Falling edge triggered, SEG (1~60)
6 E2 Operation enable signal. Falling edge triggered, SEG (61~120)
7 R/W Read/Write select signal, R/W=1: Read R/W= 0: Write
8 A0 Register select signal. A0=0: Command, A0=1: Data
9-16 DB0-DB7 This is an 8-bit Bi-directional data bus
17 LED+ Power supply for LED backlight (+5.0V via on-board resistor)
18 LED- Ground for backlight
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD VDD=5.0V, Ta=25 oC - 2.0 3.0 mA
Supply for LCD (contrast) VDD-V0 Ta=25 oC - 6.5 - V
“H” Level input Vih 0.7*VDD 0.7*VDD VDD V
“L” Level Input Vil 0 - 0.6 V
“H” Level Output Voh 2.4 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED= 5.0V - 120 - mA
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED= 5.0V - 18 - mA
Fron
t
Fron
t
5-108WWW.NEWHAVENDISPLAY.COM
NHD-12864WX-T1
Electrical Characteristics
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 3.0 3.3 3.6 V
Supply Current IDD VDD= 3.0 V, Ta=25 oC - 0.18 - mA
Supply for LCD (contrast) VDD-V0 Ta=25 oC - 9.0 - V
“H” Level input Vih 2.0 - VDD V
“L” Level Input Vil 0 - 0.8 V
“H” Level Output Voh 2.4 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (White) VLED 3.4 3.5 3.6 V
Backlight Supply Current (White) ILED VLED= 3.5V 28.8 32 50 mA
LCD Module Specification
Pin No. Symbol Function Description
1 VDD Power Supply for logic (+3.3V)
2 VSS Ground
3 CS1B Active LOW Chip Select Signal for LEFT half of LCD
4 CS2 Active LOW Chip Select Signal for RIGHT half of LCD
5 RES Active LOW Reset signal
6 A0 Register select signal. A0=0: Command, A0=1: Data
7 R/W Read/Write select signal, R/W=1: Read R/W= 0: Write
8 E Operation enable signal. Falling edge triggered.
9-16 DB0-DB7 This is an 8-bit Bi-directional data bus
17 C86 Select MPU interface pin. C86 = H: 6800; C86 = L: 8080
18 P/S Parallel/Serial select. PS = H: Parallel; PS = L: Serial
A LED+ Power supply for LED backlight (+3.5V)
K LED- Ground for backlight
LCD Module Specification
Fron
t
67.1
8
24.0
1
22.3
6
34
66.0
8
7.35.4
3 2 .5
46.0
0 .5
15.0
0.2
9 .58 .5
1 1 8
3 8 .01 M a x 3 4 0 .2
2 9 .5 8 (V A )2 .2 14 .2 1 2 5 .5 8 (A A )
6.5
2.5
1.5
P 0 .6 * 4 8 = 2 8 .8
4.68
24.2
20.
2
1 .519.5
2.3
4 9
11.5
4 9
10M
ax
15.9
8(A
A)
21.7
20.
2
17.9
8(V
A)
26.4
0 .2
3.37
0 .3
2 -R 0 .7 5 1
9 .4 61
1 2 8 * 6 4 D o ts
+-
+ -
+ - + -
0. 3 0.05
9.3Max
0.5
0.5
0.55 0.11.6
0.55 0.1
0.5
0.5
1.0MAX
NT7534H-TABF1-040602
20.7
5.0
-
-- -
-
+
+
+ ++
5-109
NHD-12864MZ
Display Pattern
Electrical Characteristics
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD VDD= 5.0 V, Ta=25 oC - 0.41 - mA
Supply for LCD (contrast) VDD-V0 Ta=25 oC - 9.5 - V
“H” Level input Vih 2.2 - VDD V
“L” Level Input Vil 0 - 0.8 V
“H” Level Output Voh 2.4 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (White) VLED - 5.0 - V
Backlight Supply Current (White) ILED VLED= 5.0V - 30 - mA
Pin No. Symbol Function Description
1 VDD Power Supply for logic (+5.0V)
2 VSS Ground
3 V0 Power supply for contrast (approx. -4.5V)4-11 DB0-DB7 This is an 8-bit Bi-directional data bus
12 CS2 Active LOW Chip Select Signal for RIGHT half of LCD
13 CS1 Active LOW Chip Select Signal for LEFT half of LCD
14 RST Active LOW Reset signal
15 R/W Read/Write select signal, R/W=1: Read R/W= 0: Write
16 D/I Register select signal
17 E Operation enable signal. Falling edge triggered.
18 VSS Ground
19 LED+ Power supply for LED backlight (+5.0V via on-board resistor)
20 LED- Ground for backlight
LCD Module Specification
Fron
t
5-110WWW.NEWHAVENDISPLAY.COM
NHD-12864WG-B LCD Module Specification
Electrical Characteristics
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.75 5.0 5.25 V
Supply Current IDD VDD= 5.0 V, Ta=25 oC - 1.5 - mA
Supply for LCD (contrast) VDD-V0 Ta=25 oC - 8.5 - V
“H” Level input Vih 0.7VDD - VDD V
“L” Level Input Vil 0 - 0.3VDD V
“H” Level Output Voh 2.4 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (White) VLED - 3.5 3.7 V
Backlight Supply Current (White) ILED VLED= 3.5V - 80 120 mA
Pin No. Symbol Function Description
1 VDD Power Supply for logic (+5.0V)
2 VSS Ground
3 V0 Power supply for contrast (approx. -3.5V)4-11 DB0-DB7 This is an 8-bit Bi-directional data bus
12 CS1 Chip Selection: CS1=H, CS2=L : select IC1 (left side) CS1=L, CS2=H : select IC2 (right side)13 CS2
14 RST Active LOW Reset signal
15 R/W Read/Write select signal, R/W=1: Read R/W= 0: Write
16 D/I Register select signal
17 E Operation enable signal. Falling edge triggered.
18 VEE Negative voltage output (-10V)
19 LED+ Power supply for LED backlight (+3.5V)
20 LED- Ground for backlight
4.9
1.0
8.9Max
DOT SIZE
0.390.43
0.39
0.43
1 20
2.9
44.6
0 .5
4 9.7
52.7
0.5
10.0 55.0(AA)7.5 60.0(VA)
70.61.5
2.5 70.075.0 0.5
13.37 P2.54*19=48.26
20 1.0PTH20 1.8PAD
37.5
2.5
20.1
210
.16
2- 2.5 PTH2- 4.0 PAD
2-R1.25 PTH2-R2.0 PAD
2.2
128*64 Dots
25.3
5
31.2
6(V
A)
27.4
8(A
A)
9.05
1 1.5
9
K
A
--
The non-specified tolerance of dimension is +0.3mm
LCD Module Specification
Fron
t
5-111
NHD-12864WG-C LCD Module Specification
Electrical Characteristics
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.5 5.0 5.5 V
Supply Current IDD VDD= 5.0 V, Ta=25 oC 2.0 2.5 4.0 mA
Supply for LCD (contrast) VDD-V0 Ta=25 oC - 8.5 - V
“H” Level input Vih 2.0 - VDD V
“L” Level Input Vil 0 - 0.8 V
“H” Level Output Voh 2.4 - - V
“L” Level Output Vol - - 0.4 V
Backlight Supply Voltage (White) VLED 3.4 3.5 3.6 V
Backlight Supply Current (White) ILED VLED= 3.5V 57.6 64 100 mA
Pin No. Symbol Function Description
1 CS1 Chip Selection: CS1=H, CS2=L : select IC1(left side) CS1=L, CS2=H : select IC2(right side)2 CS2
3 VSS Ground
4 VDD Power supply for logic (+5.0V)
5 V0 Power supply for LCD contrast (approx. -3.5V)
6 D/I Register select: 1=Data, 0= Instruction
7 R/W Read/Write select signal. R/W=1: Read R/W=0: Write
8 E Operation enable signal. Falling edge triggered.
9-16 DB0-DB7 Bi-directional 8-bit data bus
17 RST Active low Reset signal
18 VEE Negative voltage output (-10.0V)
19 LED+ Power supply for LED backlight (+3.5V via on-board resistor)
20 LED- Ground for backlight
4- 2.5 PTH4- 5.0 PAD
1.6
14.3Max9.7
2.54
64.9
22.
54
5.0 68.0
78.0 0.5
70.0
0.5
55.2
7.4
44.0
(VA
)13
.038
.38(
AA
)15
.81
74.02.0
20- 1.0 PTH20- 2.0 PAD
1.8P2.54*19=48.2613.0
62.0(VA)8.056.3(AA)10.85
201
128X64 Dots
Fron
t
5-112WWW.NEWHAVENDISPLAY.COM
NHD-12864WG-F
2.5
2019
7.0
31.5
2
15.4
1.5
2.54
1
(P2.54*9)
A
K
4- 2 5 PT H4- 5.0 PA D
65.0
2.5
2.5
22.86
9.9
15.0
18.3
810.24 9.0
13.6 MAX4.0
7.566.52(AA)
80.087.0 0.5
72.0(VA)
1.620- 1.0 PTH20- 1.8 PAD
82.0
33.2
4(A
A)40
.0(V
A)
50.2
70.0
0.5
LCD Module Specification
Electrical Characteristics
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.75 5.0 5.25 V
Supply Current IDD VDD= 5.0 V, Ta=25 oC 12.0 16.0 20.0 mA
Supply for LCD (contrast) VDD-V0 Ta=25 oC - 8.0 - V
“H” Level input Vih VDD -2.2 - VDD V
“L” Level Input Vil 0 - 0.8 V
“H” Level Output Voh VDD -0.3 - VDD V
“L” Level Output Vol 0 - 0.3 V
Backlight Supply Voltage (White) VLED 3.4 3.5 3.6 V
Backlight Supply Current (White) ILED VLED= 3.5V 65 80 100 mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Power supply for logic (+5.0V)
3 V0 Power supply for LCD contrast (approx. -3.0V)
4 C/D Register select signal. C/D=0: DATA C/D =1: COMMAND
5 /RD Active LOW Read signal
6 /WR Active LOW Write signal
7-14 DB0-DB7 Bi-directional 8-bit data bus
15 /CE Active LOW chip enable
16 /RST Active LOW Reset signal
17 VEE Negative voltage output (-5.0V)
18 MD2 Column select; H:32 column; L: 40 column
19 FS1 Font Select: 1: 6x8 fonts, 0: 8x8 fonts
20 HLT Clock operating stop signal
A LED+ Power supply for LED backlight (+3.5V)
K LED- Ground for backlight
LCD Module Specification
Fron
t
5-113
NHD-12864AZ LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage ** VDD 4.7 5.0 5.5 V
Supply Current IDD VDD=5.0V - 3.5 5.5 mA
Supply for LCD (contrast) VDD-V0 - 8.7 - V
Supply for LCD (contrast -VZ) VDD-V0 - 13.8 - V
“H” Level input VIH 2.2 - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 2.4 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (white) VLED - 5.0 - V
Backlight Supply Current (white) lled VLED=5.0V, R=68Ω - 30 50 mA
Backlight Supply Voltage (yellow/green) VLED 5.0 V
Backlight Supply Current (yellow/green) lled VLED=5.0V - 120 - mA
Pin No. Symbol Function Description
1 VSS GND
2 VDD Power for Logic (+5.0V)
3 V0 Power supply for contrast (approx-3.7V) (VZ= approx. -8.8V)
4 D/I Register select:1=Data, 0=Instruction
5 R/W Read/Write signal, R/W=1: Read R/W: =0:Write
6 E Operation enable signal. Falling edge triggered.
7-14 DB0-DB7 This is an 8-bit Bi-directional data bus.
15 CS1 Chip Selection: CS1=H, CS2=L -> select IC 1(left side) CS1=L, CS2=H -> select IC 2(right side) 16 CS2
17 /RST Active LOW reset signal
18 VEE Negative voltage output (-5.0V) (VZ= -10.0V)
19 LED+ Power for LED backlight (+5.0V via on-board resistor)
20 LED- Ground for backlight.
Electrical Characteristics
**(NHD-12864AZ-FSW-GBW-VZ can operate at 3.3V)
Fron
t
5-114WWW.NEWHAVENDISPLAY.COM
NHD-14432WG-A LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.5 5.0 5.5 V
Supply Current IDD VDD=5.0V 1.6 2.2 3.5 mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - - - V
“H” Level input VIH 0.7VDD - VDD V
“L” Level Input VIL -0.3 - 0.6 V
“H” Level Output VOH 0.8VDD - VDD V
“L” Level Output VOL 0 - 0.4 V
Backlight Supply Voltage (White) VLED - - 3.5 3.9 V
Backlight Supply Current (White) ILED VLED=3.5V 40 80 mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Power supply for Logic (+5.0V)
3 V0 Power supply for contrast (approx. 0.2V)
4 RS Register select: 1=Data, 0= instruction
5 R/W Read/Write select signal, R/W=1: Read R/W:=0: Write
6 E Operation enable signal. Falling edge triggered
7-14 DB0~DB7 This is an 8-bit bi-directional data bus
15 LED+ Power for LED backlight (+3.5V)
16 LED- Ground for backlight
Electrical Characteristics
4- 2.5 PTH4- 5.0 PAD
14.78
66.0(VA)
45.080.0
71.285.0 0.5
134.(A
A)
160.
(VA
)
1 13.
100.
9.4
25.
310.
360.
05.
252.
54.
2.5
2 1
16
12.0
15
60.44(AA)
144*32 DOTS
2.0
(P2
5.4*
4)
101.6
5- 1.0K
129.2
A
H1MaxH2
1.6
LCD Module Specification
Fron
t
LED H/L B/L
H1H2
13.28.6
High12.17.5
Low
5-115
NHD-14432WG-B LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.5 5.0 5.5 V
Supply Current IDD VDD=5.0V 1.6 2.2 3.5 mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - - - V
“H” Level input VIH 0.7VDD - VDD V
“L” Level Input VIL -0.3 - 0.6 V
“H” Level Output VOH 0.8VDD - VDD V
“L” Level Output VOL 0 - 0.4 V
Backlight Supply Voltage (White) VLED - - 3.5 - V
Backlight Supply Current (White) ILED VLED=3.5V 28.8 32 50 mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Power supply for Logic (+5.0V)
3 V0 No connect
4 RS Register select: 1=Data, 0= instruction
5 R/W Read/Write select signal, R/W=1: Read R/W:=0: Write
6 E Operation enable signal. Falling edge triggered
7-14 DB0~DB7 This is an 8-bit bi-directional data bus
15 LED+ Power for LED backlight (+3.5V)
16 LED- Ground for backlight
Electrical Characteristics
1 3 .2 M a x8 .6
1 .6
7 5 .02 .5
7 1 .26 6 .0 (V A )
8 0 .0 0 .5
4 .9 5
4 - 2 .5 P T H4 - 5 .0 P A D
1 0 .3 37 .5 5
11.6
10.3
16.0
(VA
)
5.7
36.0
0.5
8 .0 P 2 .5 4 * 1 5 = 3 8 .11 .8 1 6 - 1 .0 P T H
4 0 .5 5
18.3
2.5
6 0 .4 4 (A A )
13.4
(AA
)
1 4 4 * 3 2 d o ts
10.1
613
.22
4 - 1 .0 P T H
25.2
31.0
2.5
7 5 .02 .5
Fron
t
5-116WWW.NEWHAVENDISPLAY.COM
NHD-16032AZ LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD - 5.0 - V
Supply Current IDD VDD=5.0V - 2.0 3.0 mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - - - V
“H” Level input VIH 2.2 - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 2.4 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (Yellow/Green) VLED - - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED=5.0V - 120 - mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Power supply for Logic (+5.0V)
3 NC No connect
4 RS Register select: 1=Data, 0= instruction
5 R/W Read/Write select signal, R/W=1: Read R/W:=0: Write
6 E Operation enable signal. Falling edge triggered
7-14 DB0~DB7 This is an 8-bit bi-directional data bus
15 LED+ Power supply for LED backlight (+5.0V via on-board resistor)
16 LED- Ground for backlight
Electrical Characteristics
K
A
LCD Module Specification
Fron
t
5-117
NHD-16032BZ LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD VDD=5.0V - 1.5 2.5 mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - 4.6 - V
“H” Level input VIH 2.2 - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 2.4 - - V
“L” Level Output VOL 0 - 0.4 V
Backlight Supply Voltage (White) VLED - - 5.0 - V
Backlight Supply Current (White) ILED VLED=5.0V - 20 - mA
Backlight Supply Voltage (Yellow/Green) VLED - - 5.0 - V
Backlight Supply Current (Yellow/Green) ILED VLED=5.0V - 120 - mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Power supply for Logic (+5.0V)
3 NC No Connect
4 RS Register select: 1=Data, 0= instruction
5 R/W Read/Write select signal, R/W=1: Read R/W:=0: Write
6 E Operation enable signal. Falling edge triggered
7-10 DB0~DB3 Four low order bi-directional three-state data bus lines.These four are not used during 4-bit operation.
11-14 DB4~DB7 Four high order bi-directional three-state data bus lines
15 LED+ Power for LED backlight (+5.0V via on-board resistor)
16 LED- Ground for backlight
Electrical Characteristics
Fron
t
5-118WWW.NEWHAVENDISPLAY.COM
NHD-160128WG-B LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.5 5.0 5.5 V
Supply Current IDD VDD=5.0V 30 42 50 mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C 18.8 19.2 19.6 V
“H” Level input VIH VDD-2.2 - VDD V
“L” Level Input VIL 0 - 0.8 V
“H” Level Output VOH VDD-0.3 - VDD V
“L” Level Output VOL 0 - 0.3 V
Backlight Supply Voltage (White) VLED - 3.4 3.5 3.6 V
Backlight Supply Current (White) ILED VLED=3.5V 115.2 128 200 mA
Pin No. Symbol Function Description
1 FG Frame Ground
2 VSS Ground
3 VDD Power supply for Logic (+5.0V)
4 V0 Power supply for contrast (approx. -14.2V)
5 VEE Negative voltage output (-16.0V)
6 /WR Active LOW write signal
7 /RD Active LOW read signal
8 /CE Active LOW chip select signal
9 C/D Register select signal. C/D=1: Command C/D=0: Data
10 /HALT Active LOW clock operating stop signal
11 /RESET Active LOW reset signal
12-19 DB0~DB7 This is an 8-bit Bi-directional data bus
20 NC No Connect
A LED+ Power for LED backlight (+3.5V)
K LED- Ground for backlight
Electrical Characteristics
57.0 4.0122.0
118.0129.0 0.5
88.0
95.0
102.
00.
596
.2
82.0
(VA
)76
.76(
AA
)
4- 3.5PTH57.5
3.5
12.6
210
.0
14.016.52
3.5101.0(VA)95.96(AA)
73.5
2.9 3 .5
20- 1.0 PTH20- 1.8 PAD
2.542.5
39.6
(P2.
54*9
)22
.86
1 .6
16.5m ax11.9
LCD Module Specification
Fron
t
5-119
NHD-19232WG-B LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.5 5.0 5.5 V
Supply Current IDD VDD=5.0V 1.5 2.0 2.8 mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - 4.5 - V
“H” Level input VIH 0.7VDD - VDD V
“L” Level Input VIL -0.3 - 0.6 V
“H” Level Output VOH 0.8VDD - VDD V
“L” Level Output VOL 0 - 0.4 V
Backlight Supply Voltage (White) VLED - 3.4 3.5 3.6 V
Backlight Supply Current (White) ILED VLED=3.5V 28.8 32 50 mA
Backlight Supply Voltage (Green) VLED - 4.0 4.2 4.4 V
Backlight Supply Current (Green) ILED VLED=4.2V 168 210 315 mA
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Power supply for logic (+5.0V)
3 V0 Power Supply for contrast (approx. 0.5V)
4 RS Register select signal. RS=0: Command, RS=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W: =0:Write
6 E Operation enable signal. Falling edge triggered
7-14 DB0~DB7 Bi-directional 8-bit data bus
15 Vout Positive voltage output (+5.0V)
16 NC No Connect
A LED+ Power supply for LED Backlight (White= +3.5V) (Yellow/green= +4.2V)
K LED- Ground for Backlight
Electrical Characteristics
15.9
6(A
A)
37.0
0.3
15.0
29.0
31.2
18.6
(VA
)
7.0
108.0
4- 3.5 PTH4- 5.5 PAD
59.0
4.0
192*32 DOTS
4- 1.0 PTH
K
80.6(AA)
116.0 0.3
91.285.0(VA)
2.9
9.2
13.4
16.5
18.7 4.0
2.5
11.0
15.0
A
1.6
13.9MAX
9.3
Fron
t
5-120WWW.NEWHAVENDISPLAY.COM
NHD-24064CZ LCD Module Specification
Pin Description
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.5 5.0 5.5 V
Supply Current IDD VDD=5.0V - 7.0 - mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - 13.5 - V
“H” Level input VIH 2.2 - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 2.4 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (White) VLED - - 5.0 - V
Backlight Supply Current (White) ILED VLED=5.0V - 40 - mA
Pin No. Symbol Function Description
1 FGND Frame Ground
2 Vss Ground
3 VDD Power supply for logic (+5.0V)
4 V0 Operating voltage for LCD (approx. -8.5V)
5 /WR Active LOW Write signal
6 /RD Active LOW Read signal
7 /CE Active LOW chip enable
8 C/D Register select signal C/D=0:DATA C/D=1:COMMAND
9 VEE Negative voltage output (-10V)
10 RES Active LOW reset signal
11-18 DB0~DB7 Bi-directional three-state data bus lines.
19 FS Font Select 1=6x8 fonts, 0=8x8 fonts
20 LED+ Power supply for (+5.0V via 6.8 ohm on-board resistor)
Electrical Characteristics
LCD Module Specification
Fron
t
5-121
NHD-24064WG-A LCD Module Specification
Pin DescriptionPin No.
Symbol Function Description
1 FGND Frame Ground
2 VSS Ground
3 VDD Power supply for logic (+5.0V)
4 V0 Power supply for contrast (approx. -7.0V)
5 /WR Active LOW write signal
6 /RD Active LOW read signal
7 /CE Active LOW chip enable
8 C/D Register select signal C/D=0: DATA C/D=1: COMMAND
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.75 5.0 5.25 V
Supply Current IDD Ta=25 °C,VDD=5.0V - 16 - mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - 12.0 - V
“H” Level input VIH 2.2 - VDD V
“L” Level Input VIL 0 - 0.8 V
“H” Level Output VOH 2.4 - VDD V
“L” Level Output VOL 0 - 0.4 V
Backlight Supply Voltage (White) VLED 3.4 3.5 3.6 V
Backlight Supply Current (White) ILED VLED=3.5V 80 100 125 mA
Backlight Supply Voltage (White CCFL) VLED 185 205 225 Vrms
Backlight Supply Current (White CCFL) ILED VLED=205Vrms 4.5 5.0 5.5 mArms
Backlight Supply Voltage (Yellow/Green) VLED - 4.2 4.5 V
Backlight Supply Current (Yellow/Green) ILED VLED=4.2V 500 660 800 mA
Electrical Characteristics
BL
(B/L-Cable Length)190.0±5.0
PIN 1
PIN 3
5D-SL001-03
K
A
20- 1.0 PTH20- 1.8 PAD
4.13
2.54
5.52.6
0.3165.51
452
68.220.31
5.0±0.56
)A
V(0.93)
AA(88.33
2.013.3
23.526.42
180.0 0.5176.0154.6
133.0(VA)127.16(AA)
4- 3.5 PTH4- 7.0PAD
0.456.25
±
12.3Max
7.7
1.6*NOTE: The Yellow/Green Backlight does not come with the cable.
Pin No.
Symbol Function Description
9 VEE Negative voltage output (-10V)
10 RESET Active LOW reset signal
11-18 DB0~DB7 8-bit Bi-directional data bus
19 FS Font select: 1=6x8 fonts, 0=8x8 fonts
20 NC No connect
A LED+ Power supply for LED Backlight (White= +3.5V) (Yellow/Green= +4.2V) (White CCFL= +205Vrms)
K LED- Ground for backlight
WHITE LINE
RED LINE
K
A
Component Side
A
K
Fron
t
5-122WWW.NEWHAVENDISPLAY.COM
NHD-240128BZ LCD Module Specification
Pin DescriptionPin No. Symbol Function Description
1 VSS Ground
2 VDD Power supply for logic (+5.0V) 3V= (+3.3V)
3 V0 Power supply for contrast (approx. +19.2V)
4 A0 Register Select signal. 0: instruction; 1: data
5 R/W Read/Write select signal, R/W=1: Read R/W=0: Write
6 E Operation enable signal. Falling edge triggered.
7-10 DB0~DB3 Four low order bi-directional three-data bus lines. These four are not used during 4-bit operation.
11-14 DB4~DB7 Four high order bi-directional three-state data bus lines.
15 /CS Active LOW chip select signal
16 68/80 Interface Select Pin. 0:8080 Family 1: 6800 Family
17 /RESET Active LOW reset signal
18 VEE Positive voltage supply output (+20V)
19 LED+ Power supply for LED Backlight (+3.0V)
20 LED- Ground for Backlight
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C,VDD=5.0V - 3.5 5.5 mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - -14.2 - V
Supply Voltage (3V) VDD 2.7 3.3 3.5 V
Supply Current (3V) IDD Ta=25 °C,VDD=3.3V - 3.5 5.5 mA
Supply for LCD (contrast 3V) VDD-V0 Ta=25 °C - -15.9 - V
“H” Level input VIH 2.2 - VDD V
“L” Level Input VIL 0 - 0.6 V
“H” Level Output VOH 2.4 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (White) VLED - 3.0 - V
Backlight Supply Current (White) ILED VLED=3.0V - 36 - mA
Electrical Characteristics
0 2 1
LCD Module Specification
Fron
t
5-123
NHD-240128WG-B LCD Module Specification
Pin DescriptionPin No. Symbol Function Description
1 VSS Ground
2 VDD Power supply for Logic (+5.0V)
3 V0 Power supply for contrast (LED= approx. -14.5V)
4 C/D Register select signal. C/D=1: Command C/D=0: Data
5 /RD Active LOW Read signal
6 /WR Active LOW Write signal
7-14 DB0-DB7 This is an 8-bit Bi-directional data bus
15 /CE Active LOW Chip Select signal
16 /RESET Active LOW Reset signal
17 VEE Negative voltage output (-16.0V)
18 MD2 Display size signal. H:32 columns; L: 40 columns
19 FS Font select signal. H: 6x8, L: 8x8
20 NC No Connect
A LED+ Power supply for LED backlight (+3.5V)
K LED- Ground for backlight
Electrical CharacteristicsItem Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 3.3 5.0 5.25 V
Supply Current IDD Ta=25 °C,VDD=5.0V 45 55 60 mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C - 19.5 - V
“H” Level input VIH VDD-2.2 - VDD V
“L” Level Input VIL 0 - 0.8 V
“H” Level Output VOH VDD-0.3 - VDD V
“L” Level Output VOL 0 - 0.3 V
Backlight Supply Voltage (White) VLED 3.4 3.5 3.6 V
Backlight Supply Current (White) ILED VLED=3.5V 160 180 225 mA
Fron
t
5-124WWW.NEWHAVENDISPLAY.COM
NHD-240128WG-A LCD Module Specification
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.75 5.0 5.25 V
Supply Current IDD Ta=25 °C,VDD=5.0V - 23.0 - mA
Supply for LCD (contrast) VDD-V0 Ta=25 °C 16.3 18.0 20.1 V
“H” Level input VIH VDD-2.2 - VDD V
“L” Level Input VIL 0 - 0.8 V
“H” Level Output VOH VDD-0.3 - VDD V
“L” Level Output VOL 0 - 0.3 V
Backlight Supply Voltage (White- LED) VLED 3.4 3.5 3.6 V
Backlight Supply Current (White- LED) ILED VLED=3.5V 128 160 200 mA
Backlight Supply Voltage (White- CCFL) VL - 328 348 Vrms
Backlight Supply Current (White- CCFL) IL - 5.0 5.5 mArms
Electrical Characteristics
Pin No. Symbol Function Description
1 FG Frame Ground
2 VSS Ground
3 VDD Power supply for logic (+5.0V)
4 V0 Power supply for contrast (approx. -13.0V)
5 WR Read/Write select signal, R/W=1: Read R/W: =0: Write
6 RD Active LOW read
7-14 CE Active LOW chip select signal
15 C/D Register select signal. CD=1: Command, CD=0: Data
Pin Description
With LED Backlight
With CCFL Backlight
130.0 10.0
7.8 1.614.0 MAX
21.02 119.97(AA)16.5 128.0(VA I)
5.0170.0 0.5
8.01
563
.97(
AA
)2.
575
.0(V
A I)
86.8
15.0 132.0(VA II)
2.0
76.0
(VA
II) 47
.022
.86
4.5
85.03.33
2.54
(P2.
54*9
)
103.
50.
5
4.0 162.0
4- 3.5 PTH4- 5.0 PAD
20-1 .0 PTH20-1 .8 PAD
152.0
VA I is effective area of LCD.VA II is window of bezel.
12
1920
4.0
93.0
0.5
18.1
17.0
5.0
Pin No. Symbol Function Description
16 VEE Negative voltage output (-22V)
17 RESET Active LOW reset signal
18 DB0~DB7 Bi-directional three-state data bus lines.
19 FS Font select signal. H:6x8, L:8x8
20 RV Display mode signal. RV=1: Reverse display, RV=0: normal
A LED+ Power supply for LED backlight (+3.5V)
K LED- Ground for backlight
LCD Module Specification
190.0±5.0
2.54
3.3
22.8
651
.5
6.0
5.0
20-1 .0 PTH20-1 .8 PAD
24.1
0.4
12.5
1563
.97(
AA
)
86.6
(Fra
me)
74.0
(VA
)(Fr
ame)
75.0
(VA
)(LC
D)
85.0
7.57.0
4.5
93.0
(PC
B)
93.4
±0.5
25.01 119.97(AA)
170.0 0.5
152.0(Frame)128.0(VA)21.0
9.0162.04.0
A
K
4- 1.0PTH
4- 3.5 PTH4- 5.0 PAD
Fron
t
Front
5-125
NHD-320240WX-Co
36.7
38.1
17.1
P1.0*213.75 21.0
CON2
36.7
47.05
8.6MAX
5.6
71.7
70.3
61.0
(VA
)
57.5
8(A
A)
94.793.8
81.4(VA)76.78(AA)
221
320*240 dots
1
A
(Down-Side)CN-FPC-22P/P1.0
14.3
LCD Module Specification
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 3.0 3.3 3.6 V
Supply Current IDD Ta=25 °C,VDD=3.3V 20.0 30.0 50.0 mA
Supply for LCD (contrast) VDD-VLCD Ta=25 °C 12.2 18.7 22.5 V
“H” Level input VIH 0.5VDD - VDD V
“L” Level Input VIL 0 - 0.2VDD V
“H” Level Output VOH 2.4 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (White) VLED 3.4 3.5 3.6 V
Backlight Supply Current (White) ILED VLED=3.5V 97.2 108 120 mA
Electrical Characteristics
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Power supply for logic (+3.3V)
3 V0 Power supply for contrast (approx. +18.7V)
4 A0 Register select signal. A0=0: Command, A0=1: Data
5 WR Read/Write select signal, R/W=1: Read R/W:=0: Write
6 RD Active LOW read
7-14 DB0-DB7 Bi-directional three-state data bus lines
15 CS Active LOW chip select
Pin Description
CN-FPC-22P/P1.0(Down-Side)14.3
A
320*240 dots
1 22
76.78(AA)81.4(VA)
93.894.7
57.5
8(A
A)
61.0
(VA
)70
.371
.7
6.5
83.3
47.05
36.7
CON2
21.03.75P1.0*21
17.1
Pin No. Symbol Function Description
16 RES Active LOW reset signal
17 VEE+ Positive voltage output (+28V)
18 SEL1 No Connect (selected by on-board jumper JSEL)
19 LED+ Power Supply for LED Backlight (+3.5V)
20 LED- Ground for Backlight
21 DISPOFF Active LOW display off signal
22 NC No Connect
Without Mounting Tabs
With Mounting Tabs
Fron
t
5-126WWW.NEWHAVENDISPLAY.COM
NHD-320240WG-Co
16.45 115.18(AA)
4.44 136.2
4.02 139.98
16.6
286
.38(
AA
)
7.11
105.
4
4.02
112.
2
120.
240.
5
21.06
148.02 0.5
20- 1.0PTH20- 1.8PAD
10.5
1.6
15.6M AX
92.1
4(V
A)
13.7
4 120.14(VA)13.97
320*240 Dots
5.0
20 219 1
22.862.54
(P2.54*9)
4- 3.5PTH4- 6.0PAD
XH-3P EQ
190.0±5.0
LCD Module Specification
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.5 5.0 5.5 V
Supply Current IDD Ta=25 °C,VDD=5.0V 95.0 100.0 110.0 mA
Supply for LCD (contrast) VDD-VLCD Ta=25 °C 23.0 23.8 25.0 V
“H” Level input VIH 0.5VDD - VDD V
“L” Level Input VIL 0 - 0.2VDD V
“H” Level Output VOH 2.4 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (White) VLED 3.4 3.5 3.6 V
Backlight Supply Current (White) ILED VLED=3.5V 115.2 128 200 mA
Electrical Characteristics
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Power supply for logic (+5.0V)
3 V0 Power supply for contrast (approx. -18.8V)
4 E Operation enable signal. Falling edge triggered.
5 R/W Read/Write select signal, R/W=1: Read R/W:=0: Write
6 A0 Register select signal. A0=0: Common, A0=1: Data
7-14 DB0-DB7 Bi-directional three-state data bus lines
15 /CS Active LOW chip select
16 /RST Active LOW reset signal
17 VEE Negative voltage output (-25V)
18 FG Frame Ground
19 NC No Connect
20 NC No Connect
A LED+ Power supply for LED Backlight (+5.0V)
K LED- Ground for Backlight
Pin Description
LCD Module Specification
Fron
t
5-127
NHD-320240WG-A LCD Module Specification
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.7 5.0 5.5 V
Supply Current IDD Ta=25 °C,VDD=5.0V 70.0 75.0 80.0 mA
Supply for LCD (contrast) VDD-VLCD Ta=25 °C 22.1 24.0 26.2 V
“H” Level input VIH 0.8VDD - VDD V
“L” Level Input VIL -0.3 - 0.2VDD V
“H” Level Output VOH VDD-0.4 - VDD V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (White) VLED 3.4 3.5 3.6 V
Backlight Supply Current (White) ILED VLED=3.5V 115.2 128 200 mA
Electrical Characteristics
Pin No. Symbol Function Description
1-4 DB0-DB3 Signal data bus
5 DISP OFF Display On/Off
6 FLM Scan Start-up signal
7 M No Connect
8 LP Data latch pulse
9 CP Data shift pulse
10 VDD Power Supply for logic (+5.0V)
11 VSS Ground
12 VEE Negative voltage output (-25V)
13 V0 Power supply for contrast (approx. -19.0V)
14 FGND No Connect
Pin Description
Fron
t
190.0±10.0
B/L
4- PAD
160.0±0.5
320*240 Dots
25.0 122.0(VA)
8.5
92.0
(VA
)
4- 3.5PTH
37.9
206.
03.
0
109.
00.
5
101.
04.
010
4.7
2.15
86.3
8(A
A)
11.3
1
152.04.0
141.011.0
115.18(AA)28.41
Max13.0
1.5210.0
0.30±0.05
(PCB)1.0
6.5
The non-specified tolerance of dimension is ±0.3 mm .
0.36
0.34
0.360.34
DOT SIZESCALE 10/1
5.01
.0
w=0.8p=1.25
P1.25*13=16.25
18.75
1.25
Contact SideSCALE 2/1
The stiffen tape of the FFC cable is in the same diraction as LCD panel side.and it's contact side as PCB component's side
5-128WWW.NEWHAVENDISPLAY.COM
NHD-320240WG-Bx
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.75 5.0 5.25 V
Supply Current IDD Ta=25 °C,VDD=5.0V 65.0 75.0 85.0 mA
Supply for LCD (contrast) VDD-VLCD Ta=25 °C 22.0 23.8 26.1 V
Supply Voltage (3V) VDD 3.0 3.3 3.5 V
Supply Current (3V) IDD Ta=25 °C, VDD=3.3V 65.0 75.0 85.0 mA
Supply for LCD (contrast 3V) VDD-VLCD Ta=25 °C 20.0 21.8 24.1 V
“H” Level input VIH 0.5VDD - VDD V
“L” Level Input VIL 0 - 0.2VDD V
“H” Level Output VOH -0.4VDD - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (White) VLED 3.4 3.5 3.6 V
Backlight Supply Current (White) ILED VLED=3.5V 120 160 180 mA
Electrical Characteristics
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Power supply for logic (+5.0V) (3VR= 3.3V)
3 V0 Power supply for contrast (approx. -18.8V)
4 A0 Register select signal. A0=0: Command, A0=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W:=0: Write
6 E Operation enable signal. Falling edge triggered
7-14 DB0-DB7 Bi-directional three-state data bus lines
15 /CS Active LOW chip select
16 /RST Active LOW reset signal
17 VEE Negative voltage output (-25V)
18 NC No Connect
19 NC No Connect
20 WAIT Check Busy
Pin Description
LCD Module Specification
190.0 5.0
(PCB)1.0
4- PAD4- 3.5PTH
320*240 Dots
25.0 122.0(VA)8.
592
.0(V
A)
13.0MAX
1.06.5
160.0 0.510
9.0
0.5
101.
04.
0
104.
72.
15
86.3
8(A
A)
11.3
1
152.04.0
115.18(AA)28.41
0.36
0.34
0.360.34
DOT SIZESCALE 10/1
KA
LCM
B/LR
LED B/L drive directly from A and K.
The non-specified tolerance of dimension is 0.3mm.
Fron
t
5-129
NHD-320240WG-Bo
Item Symbol Condition Min. Typ. Max. Unit
Operating Temperature Range Top Absolute Max -20 - +70 °C
Storage Temperature Range Tst Absolute Max -30 - +80 °C
Supply Voltage VDD 4.5 5.0 5.5 V
Supply Current IDD Ta=25 °C, VDD=5.0V
95.0 100.0 110.0 mA
Supply for LCD (contrast) VDD-VLCD Ta=25 °C 22.0 24.0 26.0 V
“H” Level input VIH 0.5VDD - VDD V
“L” Level Input VIL 0 - 0.2VDD V
“H” Level Output VOH 2.4 - - V
“L” Level Output VOL - - 0.4 V
Backlight Supply Voltage (White) VLED 3.4 3.5 3.6 V
Backlight Supply Current (White) ILED VLED=3.5V 120 160 180 mA
Electrical Characteristics
Pin No. Symbol Function Description
1 VSS Ground
2 VDD Power supply for logic (+5.0V)
3 V0 Power supply for contrast (approx. -19.0V)
4 A0 Register select signal. A0=0: Command, A0=1: Data
5 R/W Read/Write select signal, R/W=1: Read R/W:=0: Write
6 E Operation enable signal. Falling edge triggered
7-14 DB0-DB7 Bi-directional three-state data bus lines
15 /CS Active LOW chip select
16 /RST Active LOW reset signal
17 VEE Negative voltage output (-25V)
18 NC No Connect
19 NC No Connect
20 NC No Connect
Pin Description
LCD Module Specification
190. .0
(PCB)1.0
4- PAD4- 3.5PTH
The non-specified tolerance of dimension is 0.3mm.
320*240 Dots
25.0 122.0(VA)
8.5
92.0
(VA
)13.0MAX
1.06.5
160.0 0.5
109.
00.
510
1.0
4.0
104.
72.
15
86.3
8(A
A)
11.3
1152.04.0
115.18(AA)28.41
0.36
0.34
0.360.34
DOT SIZESCALE 10/1
0 5
Fron
t
5-130WWW.NEWHAVENDISPLAY.COM
VFDSpecifications
LCD Module Specification
5-131
M0116SY-161MSAR1-S2 VFD Module Specification
Electrical CharacteristicsItem Symbol Min. Typ. Max. Unit
Operating Temperature Range Top -40 - +85 °C
Storage Temperature Range Tst -50 - +95 °C
Supply Voltage VCC 4.5 5.0 5.5 V
Supply Current ICC - 150 200 mA
Item Value
Character Height x Width 5.0mm x 3.0mm
Interface Serial
Peak Wavelength Green (505nm)
Luminance 204 fL typ.
General Specifications
5-132WWW.NEWHAVENDISPLAY.COM
M0116MY-161LSBR2-S2 VFD Module Specification
Electrical CharacteristicsItem Symbol Min. Typ. Max. Unit
Operating Temperature Range Top -45 - +85 °C
Storage Temperature Range Tst -50 - +95 °C
Supply Voltage VCC 4.5 5.0 5.5 Vdc
Supply Current ICC - 350 500 mA
Item Value
Character Height x Width 10.0mm x 5.0mm
Interface Serial
Peak Wavelength Blue-Green (505nm)
Luminance 200 fL typ.
General Specifications
DISPLAY AREA
VFD Module Specification
5-133
M0116SD-161SDBR1-1 VFD Module Specification
Electrical CharacteristicsItem Symbol Min. Typ. Max. Unit
Operating Temperature Range Top -40 - +85 °C
Storage Temperature Range Tst -50 - +95 °C
Supply Voltage VCC 4.5 5.0 5.5 Vdc
Supply Current ICC - 90.5 108 mA
Item Value
Character Height x Width 5.29mm x 2.8mm
Interface Serial
Peak Wavelength Green (505nm)
Luminance 200 ft-L
General Specifications
COMPONENT AREANOTE: DIMENSIONS IN ( ) ARE REFERENCE ONLY.
5-134WWW.NEWHAVENDISPLAY.COM
M0116SD-161SDBR1-S VFD Module Specification
Electrical CharacteristicsItem Symbol Min. Typ. Max. Unit
Operating Temperature Range Top -40 - +85 °C
Storage Temperature Range Tst -50 - +95 °C
Supply Voltage VCC - 5.0 7.0 Vdc
Supply Current ICC - 90.5 108 mA
Item Value
Character Height x Width 5.1mm x 2.55mm
Interface Serial
Peak Wavelength Green (505nm)
Luminance 200 ft-L
General Specifications
VFD Module Specification
5-135
M0216SD-162SDAR2-1 VFD Module Specification
Electrical CharacteristicsItem Symbol Min. Typ. Max. Unit
Operating Temperature Range Top -40 - +85 °C
Storage Temperature Range Tst -50 - +95 °C
Supply Voltage VCC 4.5 5.0 5.5 V
Supply Current ICC - 170 220 mA
Item Value
Character Height x Width 5.34mm x 2.10mm
Interface Serial
Peak Wavelength Green (505nm)
Luminance 500/146 ft-L
General Specifications
COMPONENT AREANOTE: DIMENSIONS IN ( ) ARE REFERENCE ONLY.
+0.13
+0.13
+0.13
+0.13
+0.38
+0.38
+0.38
+0.38
+0.1
+0.7/ -0.5
+0.8/ -0.5
5-136WWW.NEWHAVENDISPLAY.COM
M0216SD-162SDAR1 VFD Module Specification
Electrical CharacteristicsItem Symbol Min. Typ. Max. Unit
Operating Temperature Range Top -40 - +85 °C
Storage Temperature Range Tst -50 - +95 °C
Supply Voltage VCC 4.5 5.0 5.5 V
Supply Current ICC - 130 200 mA
Item Value
Character Height x Width 4.34mm x 2.26mm
Interface Serial
Peak Wavelength Blue/Green (505nm)
Luminance 680/200 ft-L
General Specifications
VFD Module Specification
MOUNTING COMPONENT AREA
5-137
M0216SD-162SDAR8 VFD Module Specification
Electrical CharacteristicsItem Symbol Min. Typ. Max. Unit
Operating Temperature Range Top -40 - +85 °C
Storage Temperature Range Tst -50 - +95 °C
Supply Voltage VCC 4.5 5.0 5.5 V
Supply Current ICC - 120 170 mA
Item Value
Character Height x Width 5.34mm x 2.10mm
Interface Serial
Peak Wavelength Green (505nm)
Luminance 500/146 ft-L
General Specifications
5-138WWW.NEWHAVENDISPLAY.COM
M0216MD-162MDBR2-J VFD Module Specification
Electrical CharacteristicsItem Symbol Min. Typ. Max. Unit
Operating Temperature Range Top -40 - +85 °C
Storage Temperature Range Tst -50 - +95 °C
Supply Voltage VCC 4.5 5.0 5.5 Vdc
Supply Current ICC - 350 400 mA
Item Value
Character Height x Width 9.22mm x 3.85mm
Interface Serial/Parallel
Peak Wavelength Blue-Green (505nm)
Luminance 200 Ft-L typ.
General Specifications
VFD Module Specification
5-139
M0220SD-202SDAR1 VFD Module Specification
Electrical CharacteristicsItem Symbol Min. Typ. Max. Unit
Operating Temperature Range Top -40 - +85 °C
Storage Temperature Range Tst -50 - +95 °C
Supply Voltage VCC 4.5 5.0 5.5 Vdc
Supply Current ICC - 140 190 mA
Item Value
Character Height x Width 5.34mm x 2.35mm
Interface Serial/Parallel
Peak Wavelength Blue-Green (505nm)
Luminance 146 fL typ.
General Specifications
5-140WWW.NEWHAVENDISPLAY.COM
M0220SD-202SDAR1-1G VFD Module Specification
Electrical CharacteristicsItem Symbol Min. Typ. Max. Unit
Operating Temperature Range Top -40 - +85 °C
Storage Temperature Range Tst -50 - +95 °C
Supply Voltage VCC 4.5 5.0 5.5 Vdc
Supply Current ICC - 140 190 mA
Item Value
Character Height x Width 5.34mm x 2.35mm
Interface Serial/Parallel
Peak Wavelength Blue-Green (505nm)
Luminance 146 fL typ.
General Specifications
VFD Module Specification
5-141
M0220MD-202MDAR1-1 VFD Module Specification
Hole 1 and 18 not used
Electrical CharacteristicsItem Symbol Min. Typ. Max. Unit
Operating Temperature Range Top -40 - +85 °C
Storage Temperature Range Tst -50 - +95 °C
Supply Voltage VCC 4.5 5.0 5.5 Vdc
Supply Current ICC - 290 435 mA
Item Value
Character Height x Width 8.78mm x 3.68mm
Interface Serial/Parallel
Peak Wavelength Blue-Green (505nm)
Luminance 146 fL typ.
General Specifications
COMPONENT AREANOTE: DIMENSIONS IN ( ) ARE REFERENCE ONLY.
5-142WWW.NEWHAVENDISPLAY.COM
M0220MD-202MDAR1-3
Electrical CharacteristicsItem Symbol Min. Typ. Max. Unit
Operating Temperature Range Top -40 - +85 °C
Storage Temperature Range Tst -50 - +95 °C
Supply Voltage VCC 4.5 5.0 5.5 Vdc
Supply Current * ICC - 290 435 mA
Item Value
Character Height x Width 8.78mm x 3.68mm
Interface Parallel
Peak Wavelength Blue-Green (505nm)
Luminance 500 cd/m2 typ.
General Specifications
VFD Module Specification
*Note: In-rush current can be approx 10 times the specified supply current at power up.
VFD Module Specification
COMPONENT AREANOTE: DIMENSIONS IN ( ) ARE REFERENCE ONLY.
5-143
M0224SD-242MDBR1-1
±
VFD Module Specification
Electrical CharacteristicsItem Symbol Min. Typ. Max. Unit
Operating Temperature Range Top -40 - +85 °C
Storage Temperature Range Tst -50 - +95 °C
Supply Voltage VCC 4.5 5.0 5.5 Vdc
Supply Current * ICC - 150 165 mA
Item Value
Character Height x Width 5.29mm x 2.10mm
Interface Parallel/Serial
Peak Wavelength Blue-Green (505nm)
Luminance 200 Ft-1 typ.
General Specifications
5-144WWW.NEWHAVENDISPLAY.COM
M0240SD-402MDAR1-3 VFD Module Specification
Electrical CharacteristicsItem Symbol Min. Typ. Max. Unit
Operating Temperature Range Top -40 - +85 °C
Storage Temperature Range Tst -50 - +95 °C
Supply Voltage VCC 4.5 5.0 5.5 Vdc
Supply Current ICC - 350 450 mA
Item Value
Character Height x Width 5.34mm x 2.15mm
Interface Parallel/Serial
Peak Wavelength Blue-Green (505nm)
Luminance 200 Ft-1 typ.
General Specifications
VFD Module Specification
5-145
M0420SD-204SDAR1-3
1.2
Electrical CharacteristicsItem Symbol Min. Typ. Max. Unit
Operating Temperature Range Top -40 - +85 °C
Storage Temperature Range Tst -50 - +95 °C
Supply Voltage VCC 4.5 5.0 5.5 Vdc
Supply Current ICC - 310 440 mA
Item Value
Character Height x Width 4.84mm x 2.35mm
Interface Parallel/Serial
Peak Wavelength Blue-Green (505nm)
Luminance 146 fL typ.
General Specifications
VFD Module Specification
COMPONENT AREANOTE: DIMENSIONS IN ( ) ARE REFERENCE ONLY.
+0.2
+0.38
+0.2
+0.95-0.75
O 2.8
Newhaven Display International, Inc.
2511 Technology Drive Elgin, IL 60124, USAwww.newhavendisplay.com
Phone 847.844.8795 Fax 847.844.8796
Sales- [email protected] Support- [email protected]