Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
Proudly Serving the North American Rubber Industry Since 1992
• FALL 2020 •
Rubber EquipmentWooster, Ohio USA
ALL ITEMS IN STOCK FOR IMMEDIATE OR PROMPT DELIVERIES
• NEW • USED • REBUILT •
-Page 1- Tel: 330-263-7845 • e-mail: [email protected] • www.gomaplast.com
• 4-post • Electric Platens • Adjustable Daylight • Double Acting Cylinder • Fully Guided Bolster
• Allen Bradley PLC & Color HMI. Automatic & Manual Modes. Digital Temperature & Pressure Gauges. Solid State Relays. Dual Palm Closing.
SEE THEM ALL IN OUR SHOWROOM TODAY
NEW LABORATORY PRESSES
1156
12"x12"30 Ton
(305x305)
650A
Optional: Light Curtain, Safety Guarding and Mold Shuttle Table
650C
18"x18"(457x457)
75 Ton
24"x24"(610x610)
185 Ton
17511157
30 Ton15"x15"(381x381)
PRESSES NEW & USED IN STOCK
20"x16" Wabash Vacuum, electric plat-ens w/cooling, 10 Ton, 16" stroke, 16" DL, Allen Bradley PLC, vacuum
unit, 220V/3PH.1463
16
24"x18" TMP, 4-post, 3 x 6” DLs, steam platens, hydraulics, controls, 460V/3PH
1533 17
24"x24" French Oil, 350 Ton, slab sides, 20"ø ram, 5” DL. 240V/3PH, controls, shuttle table, hydraulics, electric platens.
1813
18
24"x24" Erie, 190 Ton, 4-post, 24" DL, 14"Ø ram, 14"
stroke. Rebuilt.
205
19
1653
8”x8” TMP Vacuum, 5 Ton, 3” DL, 4”ø Ram, electric platens.
2
(2)12" x 12" WAND Presses, 50 Ton, mold shuttle, set for shoe insoles. 480V/3PH. Two available.
971/972
4
(2) 12”x12” Wabash Vacuum Transfer Presses, 50 Ton, 8” DL, 7”ø x 7” stroke, 10 hp hydraulics, electric platens, common control station.
896
5
(6) 12”x12” Wabash, 4”ø ram, 10” stroke, (4) 12”x12” electric platens, 2x4” DLs, Includes valv-ing & wiring. Missing Hydraulic unit.
1036
7
12”x12” PHI, 4-post, 50T, 6.5"-11.5" DL, elec-tric platens, 208V/3PH.
1817 6
8.25"x8.25" Morgan, Model # G-55TE, 4-post,
elec-tric plat-ens,
120V/ 3PH.
1609 318.5"x12.5" PHI, 50 Ton, 4-post, 6" DL, cored plat-ens, 240V/3PH.
1333 15
1735
(2) 18"x18" Presses, slab sides, 21" DL, 12"Ø ram, side cylinders.
1424"x24" French Oil, slab sides, 55" DL, 18"Ø ram, 32" stroke.
1114
21
(4) 24"x24" Eemco, 375 Ton, slab sides, 14" stroke, 16" DL,
electric plat-ens, side & shuttle cylin-ders, plc con-trols, hy-drau-lics.
201294 22
24"x24" Eemco, slab sides, 350 Ton, 20"Ø ram,
25" DL, 15" stroke. Rebuilt.
1294A
(2) 6"x6" Carver, elec-tric plat-ens, 20 Ton, adjust-able DL.Hand pump. 115V/1PH.
1
1319/1630
1306/1307
(2) 18"x18" PHI, 75 Ton, steam platens, 240V/3PH.
12
15"x15" Wabash, 50 Ton, 2 x 6" DLs, 240V/3PH.
1379 11
(2) 14"x15" French Oil, 250 Ton, slab sides, 16"ø ram, 14" stroke, 9.5/13" DL, Vacuum bell & side,
shut-tle cyl-in-ders.
160110
12.5" x12.5" Wabash, 20 Ton, 4" DL, 240V/1PH.
15488
12.5” x 12.5” PHI, 30 Ton, 5”ø ram, electric platens, 3.5” DL, hand
pump.
1821 9
18"x18" Wabash, 100 Ton, 7" stroke, 8" DL, 240V/3PH.
1550 13
26"x44" Adamson, 450 Ton, 22"Ø ram, 22" stroke, 78" DL.
232
24
24"x24" Farrel, 4-post, 20" DL, 16"Ø ram, side cyl-inders, hydrau-lics & controls.
21123 25
28"x28" Erie, 4-post, 6″Ø posts, 18"ø ram, 14" stroke, 36” DL. Rebuilt.
1553A
(2) 30"x24" Erie, slab sides, 20"Ø ram, 32"/48" stroke, 59"/76" DL. Rebuilt.
228A/B 26
30"x30" French Oil, 450 Ton, 22"Ø ram, 20" DL, 20" stroke.
Electric platens.
27
1284
(2) 30"x30" French Oil, slab sides, 22"Ø ram, 17" DL. Rebuilt. 1723
28
30"x45" Erie, 20"Ø ram, 4-Post, 6"Ø posts, 16" DL, 20" spacer (not shown). Rebuilt.
1553
29
Tel: 330-263-7845 • e-mail: [email protected] • www.gomaplast.com -Page 2-
40"x40" Adamson, 4-Post, 24"Ø ram, 22" stroke, 32" DL. Rebuilt.
1163
46
40"x40" Adamson, 4-Post, 30"Ø ram, 48" DL. Rebuilt.
1619
47
(2) 40"x20" French Oil, 4-post, 2x12”Ø ram, 18” DL, steam platens.
1089
45
40"x20" Eemco, 250 Ton, 4-Post, 2 x 12"Ø rams, 20" stroke, 18" DL, steam platens.
239
44(3) 42"x42" French Oil, slab sides, 25"Ø ram, 16" stroke, 24.5" DL. Rebuilt.
1527
48 1102 50
42"x42" Albert, 4-post, 24" Ø ram, 20" stroke, 34" DL.
Rebuilt.
49
42"x42" Erie, 750 Ton, 4-post, 28'Ø ram, 24" stroke, 40” DL. Rebuilt.
1133
36" x 36" Bolling, 4-Post, 5"Ø posts, 24"Ø ram, 22" Stroke, 37" DL.
1164
41
36"x36" Erie, 500 Ton, 4-post, 24"Ø ram, 15” stroke, 12” DL.
823
40
36"x168" Belt Press, 1000 Ton, 3 DLs, 7 x 13"Ø rams, 30" DL. Rebuilt.
1750 42
38"x30" French Oil, slab sides, 800 Ton, 30ӯ ram,
24” stroke, 30” DL, Rebuilt.
1287 4339
36"x36" Bolling, 550 Ton, slab sides, 24”Ø ram, 14”
stroke, 37” DL. Rebuilt.
1049
(3) 32"x36" French Oil, slab sides, 25"Ø ram, 13" stroke, 24" DL. Rebuilt. Three avail-able.
1526
37 38
36"x32" French Oil, 780 Ton, slab sides, 28" Ø ram, 42" DL, 28" stroke.
1162
32
32"x32" Adamson, 500 Ton, slab sides, 24"Ø ram, 24" DL, 24" stroke. Rebuilt.
1285
32"x32" Eemco, 500 Ton, slab sides, 24”Ø ram, 24” stroke, 54” DL. Rebuilt.
822B
31
(2) 32"x32" Eemco, 500 Ton, slab sides, 24”Ø ram, 26” stroke, 40”/50” DLs. Rebuilt.
822A
30 35
32"x32" Adamson 4-Post, 600 Ton, 32" Stroke, 45" DL. Rebuilt.
237
36
32"x32" Eemco, 4-post, 32" DL, 26"Ø ram, 24" stroke.
1283
33
32"x32" French Oil, 350/600 Ton, slab sides, 20"/24" Ø ram, 32"/24" stroke, 52"/49" DL. Rebuilt.
1559 34
32"x32" Erie, 550 Ton, 24"Ø ram, 30" DL, 20" stroke. Rebuilt.
504
PRESSES NEW & USED IN STOCKNEW PRODUCTION PRESSES
1644• 4 x 20”ø rams • 40” stroke • 40” daylight
64"x64"1750 Ton
(1625x1625)
1646
• 4 x 24”ø rams • 40” stroke• 52” daylight
80"x80"2500 Ton
(2000x2000)
179848"x48"1250 Ton
(1220x1220)• 36”ø ram • 30” stroke • 35” daylight
30"x30" 475 Ton
(762x762)
1633
• 22”ø ram • 22” stroke • 26” daylight
1776
24"x24"375 Ton
(610x610)• 20”ø ram • 22” stroke •24” daylight
36"x36"700 Ton
(915x915)1796
• 26”ø ram • 22” stroke • 26” daylight
1797
• 30”ø ram • 22” stroke • 27” daylight
42"x42"900 Ton
(1067x1067)
• 40”ø ram• 30” stroke • 30” daylight
60"x60"1560 Ton
(1525x1525)
1638
• Slab Sides • Beveled Corner Guided Bolster • Steam Or Electric Platens.
• Allen Bradley PLC • Color Hmi. Automatic & Manual Modes,
Digital Temperature & Pressure Controllers, Dual Palm Closing, Etc.
42"x36"950 Ton
(1067x915)• 32”ø ram • 22” stroke • 31” daylight 818
To retrofit your existing pressNEW STANDARDIZED HYDRAULIC UNITS & CONTROL PANELS
15 - 500 GAL reservoirs, 5.5 - 162 GPM, 3000 PSI, Vickers pumps & valves.
30"x30"x10" NEMA 4 enclosure, Allen Bradley PLC & Red Lion color HMI programmed for auto & manu-al modes, dual palm close, open, emergency, digital temp. controllers, fused power disconnect, motor starters, solid state relays, etc.
1057
-Page 3- Tel: 330-263-7845 • e-mail: [email protected] • www.gomaplast.com
NEW CUTTERS IN STOCKNEW GUILLOTINE CUTTERS
BLADE LENGTH (INCH) 32 48
MOTOR (HP) 10 20
STROKE (INCH) 24 30
CLOSING FORCE (TON) 15 30
CUTTING HEIGHT (INCH) 24 30
DOUBLE ACTING CYLINDER
URETHANE BLADE STRIKING PAD
SIDE SAFETY GUARDING FRONT & REAR
ROLLER FEED & LET-OUT CONVEYORS
OPTIONAL: FRONT & REAR LIGHT CURTAINS
CUSTOM
32” ELEVATED182332”
1141
32” 4-WAY
1812
48"
1757
PRESSES NEW & USED / HYDRAUILC UNITS / CONTROL PANELS IN STOCK42"x42" Baldwin, slab sides, 36"Ø ram, 14" stroke, 20" DL. Rebuilt.
1593
53
244
42"x42" Fjellman, 55" DL, 900 Ton, hydrau-lics & con-trols.
51
(2) 42"x42" Erie, 750/800 Ton, 4-post, 28"/30" Ø ram, 24"/28" stroke, 40”/48” DL.
1129/1132 5252″ x 52″ French Oil, 1250 Ton, slab sides, 36″Ø ram, 30” stroke, 60” DL. Rebuilt.
181962
48"x96" Eemco, 8-post, 2x32"Ø rams, 26" stroke, 29" DL. Reconditioned.
1152 60
54"x42" Press, 40"Ø ram, 24" stroke,
32" DL.
1208 64
52″ x 52″ French Oil, 1000 Ton, slab sides, 32″Ø ram, 30” stroke, steam platens, 30” DL.
1820 63
(2) 50"x26" French Oil, 550 Ton, 4-post,
24”Ø ram, 26" stroke, 36” DL.
611639/1640
48"x48" Birdsboro, 4-post, 18"Ø ram, 18" stroke, 42" DL. Rebuilt.
249
5958
48"x48" French Oil, 1500 Ton, slab sides, 40”Ø ram, 24" stroke, 36” DL, NEW side cylinders.
NEW hydrau-lics, NEW PLC con-trols. Rebuilt.
119084"x44” Empco Press, 24″Ø cylinder, slab sides, 16″ stroke, 3-zone electric platens, 21” DL, hydraulics & Allen Bradley PLC controls, light curtains.
69
1847
78"x40" French Oil, 1130 Ton, 4-post, 2 x 24”Ø ram, 26" stroke, 40” DL.
1641
68
104"x54" Columbia, 600 Ton, 4-post, 2 x 18ӯ rams, 36" stroke, 9 x 5"
DLs, (10) hot oil plat-ens.
1816
71
98½”x40½” Press, 180 Ton, 8 x 5″Ø cylinders, 24″ stroke, (6) hot oil platens, 4 x 4 ½” DLs, hydrau-
lics & con-trols, TCU.
1835 70
56"x60" Adamson, 4-post, 48"Ø ram, 55" DL.
1642
66
NEW 66"x12", 100 Ton, 3 x 6"Ø cylinders, 12" stroke, down acting, steam platens, 12" DL. Hydraulics & controls.
1331
67250
54"x46" Erie, 1250 Ton, slab sides, 38"Ø ram, 30" stroke, 36"
DL. NEW side cylin-ders, NEW hydraulics,
NEW PLC & HMI. Rebuilt.
65
57
46"x46" Erie, 1400 Ton, slab sides, 38"Ø
ram, 28" stroke, 36” DL. Rebuilt.
1008
56
46"x42" French Oil, 1250 Ton, slab sides, 36"Ø ram,
13" stroke, 20.5” DL. Rebuilt.
1432
(2) 44"x42" French Oil, 1250 Ton, slab sides, 36"Ø ram, 14" stroke, 19" DL Rebuilt. Two available.
1470
54 55
45"x42" Adamson, slab sides, 36"Ø ram, 32" stroke, 38" DL.
1136
Tel: 330-263-7845 • e-mail: [email protected] • www.gomaplast.com -Page 4-
PREFORMERS & EXTRUDERS IN STOCK
1" Royle Extruder/Pelletizer, cold feed, 16:1 L/D, 5 HP variable speed motor/drive, on rollers.
1736 90
2" Coextrusion Line, cold feed, 10 hp dc drive, double cross extrusion. Conveyor take-up, Roller Die, Multi-drum cooling unit, Budzar 3 zone TCU, etc. Complete line.
1667 91
2" NRM CoExtrusion Line, 12: 1 L/D, cold feed, 10 hp variable speed drive, TCU, dual cross heads, conveyor take-up, cool-ing drum & winding unit.
371 92
2" Royle, cold feed, 11:1 L/D, 7.5 HP variable speed, 460V/3PH, straight head. 1765
93
2" Royle, cold feed, 12:1 L/D, 7.5 HP variable speed, 440V/3PH, straight head, unitized.
1417
94
2 1/2" Remco, cold feed, 12:1 L/D, 30 HP DC motor, straight head, SCR drive, controls. 1570
95
2 1/2" Royle, cold feed, power roll feed, 15:1 L/D, 25 HP DC motor, straight head, unitized.
1446
98
3 1/4" Farrel, 12:1 L/D, cold feed, Reliance 20 hp dc motor/drive, electric heated barrel, straight head, controls, unitized.
1178
99
3 1/2" Royle, cold feed, 13:1 L/D, belt driven 60HP/460V/AC motor, controls w/ variable speed drive, quick swing head.
1836 100
3 1/2” NRM, cold feed, 17:1 L/D, vacuum vented, power roll feed, 75 hp ac motor, direct drive, rotary joint, variable speed, unitized on rollers.
1783
101
NEW PREFORMERS, ROTATING COOLING CONVEYORS & EXTRUDERS
• 12:1 L/D • direct drive
• power roll feed• 50 HP AC Motor
• variable speed• pressure transducer
3.5"EXTRUDER 1773
• +/- 1% Accuracy • 3000 PSI • Variable Speed (Servo) Cutter • Hard Chromed Barrel • Enclosed Vacuum
• PLC & Color Touch Screen • Weighing Scale w/ Close Loop Feedback
26 Lt & 60 Lt PREFORMERS1756
1648A
1648B
INJECTION PRESSES IN STOCK
2 1/2" AMF, cold feed, 12:1 L/D, 30 HP DC motor, variable speed, controls, 480V/3PH.
1531 96
2.5" NRM, cold feed, 12:1 L/D, straight head, 40 HP DC motor.
971828
170 Ton Desma, D968.160-ZO, vertical, 220 cc, 18"x20" platens. 460V/3PH. Fully automated.
1288 77
Predator/MTI, 4-sta-tion, vertical,8" x 8" platens, 480V/3PH.
1524
76
(3) 180 Ton Desma, D968.160F, 220 cc, 15"x15" platens, 460V, 3PH. Fully automated for rubber/metal. Three available.
1321B/C/D
75
40 Ton Battenfeld, sili-cone LSR, 60cc, horizon-tal, 19.25"x12.5" electric platens. 230V/3PH.
1728
74
5 Ton Toshiba LSR, horizontal, 9"x9" plat-ens, 0.21oz shot.
1615 73
1Lt/180T LWB Steinl, VRE 1600/1000, 1000 cc, 180 Ton, vertical injec-tion, 20″ x 20″ electric platens, 480V/3PH, Used for exhibition & demo.
1840
72
(3) Gluco 20”x18”, vertical injectors, 20″ x 18″ electric platens, hydrau-lics, 3 available.
1792/1793/1794 88
100 Ton REP, horizontal, 500cc, 14"x14" electric platens, 480V/3PH.
1778 87
350 Ton Rutil, vertical, 4 Lt. 25"x33" electric platens, 480V/3PH.
1774
86
(4) 150 Ton Maplan, M1H-750-150, horizontal, 25"x20" platens, 750 cc. Four available.
1536-1539
84 85
270 Ton Desma, 968.250 ZO B750, vertical, 750 cc, 26.25"x30.75" plat-ens, 480V/3PH.
1843
(2) 700 Ton Rutil, vertical, electric platens, hydraulics & controls, 480V/3PH.
1523A/C
89
250 Ton Desma, D968.250T, vertical, 1000 cc, 26.5"x32" platens, 460V/3PH. 1761
80
80 Ton Engel, ES240/240/8020, horizontal, double shot (3.8/5.2 oz), electric platens. 440V/3PH. Laboratory use.
1246
81
150 Ton MIR, horizontal. 440V/3PH. Includes TCU.
1291
82 1119
48 Ton Rutil Silicone, 400 cm3, vertical, 480V/3PH.
83
(2) LWB Steinl: 100 cc/160 cc, vertical, 12" x 12" platens, 480V/3PH.
1405/1585 79
180 Ton Desma, D968.160F, vertical, 220 cc, 15"x15" platens, 460V/3PH. Four available.
1321A78
-Page 5- Tel: 330-263-7845 • e-mail: [email protected] • www.gomaplast.com
CALENDERS IN STOCK
PREFORMERS & EXTRUDERS IN STOCK
4 1/2" Royle, 8:1 L/D, power roll feed, 100 hp dc motor, belt driven, #4 reducer, unitized.
1139 113
4 1/2” Erie, cold feed, 15:1 L/D, convention-al feed, straight head, unitized. No motor/electricals.
1485
112
4 1/2" Royle, cold feed, 15:1 L/D, power roll feed, 100 hp dc motor, quick clamp straight head.
1416
111
4 1/2" Royle, cold feed, 15:1 L/D, power roll feed, 100 hp dc motor, SCR drive. quick clamp straight head. Reconditioned.
1116 110
3 1/2" Cold Feed Extruder, 17:1 L/D, vacuum vented, straight swing head, TCU.
1402
106
3 1/2" Royle, cold feed, 20:1 L/D, power roll, quick clamp head w/heating, variable speed motor/drive.
806
105
3 1/2” NRM, cold feed, 16:1 L/D, power roll, 150 hp ac motor, direct driven, straight head, variable speed drive, unit-ized.
1764
104
Barwell Preformer, HT2000, variable speed conveyor, multiple speed cutter, front & rear load-ing, Spare parts.
1540
125
20” x 46” Farrel Roller Die, 20” x 24” extruder, 900 hp dc motor & Lufkin Reducer, 20”x46” 2-roll calender w/motorized rolls, hydraulics & controls. 460V/3PH.
998
122
Barwell Midi Preformer, 8” Ø ram, 20 Lt capacity, 5 hp hydrau-lics, 4-speed cutter, vac-uum, front loading.
1748
123
Crowe Preformer, model # ACFP 4/S, 75 Kg/Hr, 480 cuts/min, 460V/3Ph.
967
124
4 1/2" Royle, cold feed, 12:1 L/D, power roll feed, 50 HP motor, NEW AC inverter drive, NEW operator station. Unitized, Rebuilt.
1666 114
4 1/2" Royle, cold feed, 15:1 L/D, power roll feed, 60HP DC motor & drive, controls w/ Allen Bradley touch screen, variable speed, quick swing clamp head.
1837107
Barwell Preformer, 10" Ø ram, 60 Lt capacity, 2500 PSI, multiple speed cut-ter, front loading.
1738
126
10” Black & Clawson, cold feed, 10:1 L/D, 13” x13” feed opening, 200HP/460V motor. Unitized.
925 120
1766
4 1/2" Royle, 5:1 L/D, 75 hp dc motor, belt driven, unitized.
109
4 1/2” NRM, cold feed, 17:1 L/D, power roll feed, straight, swing clamp head, controls. Missing motor & drive.
1829108
3 1/2" Krupp, 20:1 L/D, power roll feed, vacuum vented, straight swing head, TCUs, unitized. Motor & con-trols not included.
1227
103
3 1/2” NRM, cold feed, 17:1 L/D, vacuum vented, power roll feed, 75 hp ac motor, direct drive, vari-able speed, unitized on rollers.
1784
102
12" Farrel, 5:1 L/D, 16" x 21" feed opening, 300 HP dc motor, direct drive, 70" sheeter head, unitized. Reconditioned.
1175
121
4 1/2" Royle, cold feed, vent-ed, 16:1 L/D, power roll feed, straight swing clamp head, 150 HP motor, variable speed drive, on rollers. Rebuilt.
1831 115
6" Davis Standard, silicone extruder, 10:1 L/D, cold feed, power roll, straight head, 60 hp dc motor, belt drive.
1199
116
6" Davis Standard, 12:1 L/D, cold feed, power roll feed, straight quick clamp head, spare screw, Unitized. Mint Condition.
1830
117
6" NRM Silicone, 12:1 L/D, cold feed, 12”x12” feed throat, swing straight head. 100HP dc motor & drive.
895
118
8" Erie, 5:1 L/D, 9”x12” feed throat, swing straight head. 200HP dc motor. pel-letizing head w/ 3/4 hp motor/drive
1845
119
(4) 32" Ø X 88" Drilled Calender Rolls, peripherally drilled for cool-ing or heating, chrome or tungsten carbide finish, 18.5"/21.5" Ø jour-nals. Bearing housings available.
754
137
24"x 68" Farrel, reducer, bull gear & pinion, SCR drive, controls, motorized roll, 100 HP DC motor.1206
135
18" x 52" Farrel, 3-roll ver-tical, Right Angle reducer, 50 HP motor, unitized.
712
133
24" x 66" Farrel, 3-roll, Motorized Roll Adjustment, Falk Reducer, 150 HP dc motor, wind/take-up rolls.
399
134
20" x 50" Farrel, 2-roll vertical, cored rolls, direct driven, 125 hp DC motor, central lube, Alten reducer.
1781
132
16"x42" Farrel, 4-Roll, verti-cal, direct connected, Lufkin reducer, 100 hp dc motor, SCR drive, unitized.
1176
131
16"x28" Uniroyal, 2-Roll, chromed rolls, vertical, roller bearings, direct drive, 40HP motor, motorized nip, unit-ized, safeties, controls.
1834
130
8" x 16" Farrel, 3-roll, vertical, 10 hp dc motor, SCR drive, central lube, untized.
793 129
8"x16" Farrel, 4-roll, inverted-L, 15 HP DC variable speed motor/drive, unitized.
1391
128
6" x 13" Farrel, 3-roll, vertical, chromed rolls, 5 HP variable speed motor, unitized on rollers.
1447
127(15) 28" Ø X 74" Drilled Calender Rolls, peripherally drilled for cooling or heating, chrome or tung-sten carbide finish, 18.5"/19" Ø journals. Rolls are new or rebuilt. Bearing housings available.
136
753
Tel: 330-263-7845 • e-mail: [email protected] • www.gomaplast.com -Page 6-
MILLS IN STOCK
AUTOCLAVES IN STOCK48" Ø x 240" L East Fabricators, 150 PSI, NB # 744, Quick open door.
1368
174
48" Ø x 204" L WSF, 85 PSI, NB # 9475, quick open door. 1481
173
48" Ø x 168" L WSF, 125 PSI, NB # 15735, quick open door.
1106
172
36" Ø x 55" L United-McGill, 110 PSI, NB # 184, Quick open door, boiler, unitized.
1549
171
12″ø x 32″ Autoclave, 12″ø x 36″ L, NB # 1064, 100PSI/350F, horizontal, steam heated, quick opening door, hydraulic cylinder & valving. 1839
167
48" Ø x 125" L Canal Boiler Works, 100 PSI, NB # 688, manual door locking bolts, rails & sliding cart.
1740
170
16836" Ø x 120" L WSF, 125 PSI, NB # 14139, quick locking/opening door.
1105
18" Ø x 32" L Horizontal, quick
locking door.
1207
169
6”x13” Bolling, dual variable speed drives, flip guides, overhead & knee safeties.
792
148
6"x13" Thropp, 5 HP motor/drive, safeties.
1453 147
6"x13" Reliable, knee safeties, con-trols, 5 HP motor.
647 146
6”x12” Reliable, 7.5 HP motor, rotary joints, adjustable/split stock guides.
1411
145
6”x12” Eemco, adjust-able/ split guides, over-head safeties, variable speed.
716
143
6"x12" Farrel, variable speed drive, split guides, knee safe-ties.
717
144
(2) 6"x13" Eemco, chromed rolls, con-trols, knee safeties.
648 1498" x 16" Farrel, dual variable speed drives, safeties.
1578
153
6″x13″ Farrel, 7.5 HP motor, stock guides.
1768
150
6”x13” Farrel, chromed rolls, con-trols, knee safeties, etc.
646
151
6″ x13″ Farrel, chromed rolls, dual variable speed drives, motor starter, etc.
1749
152
8" x 16" Bolling, rotary joints, chain driven.
1754
154
8" x 16" Farrel, heavy duty, chromed rolls, chain driven.
1810
155
8″x18″ Reliable, chromed rolls, knee & overhead safeties, dual 10 HP DC motors, variable speed. 460V/3PH. 1838
156
26"x84" Bolling, direct drive, 84.2:1 reducer, two piece base, 250 hp motor & starter.
1112
166
26"x80" Farrel, direct connect-ed, 51.58:1 reducer, 150 hp motor, two piece base, motorized rolls, controls, safeties.
1197
165
16"x42" Kobe, 60HP/460V motor, direct drive,1.27:1 Fric-tion, double reduction reducer, unitized. 1737
162
16"x42" Kobe, chromed rolls, 50HP/460V motor, direct drive, double reduc-tion reducer, unitized.
1752
163
22"x20"x60" Farrel, 6.9:1 Falk reducer, unitized base, top cap design, 150HP/220V motor, grease lubricator, mo-tor/starter.
1844
164
3"x8" Reliable, chromed rolls, knee & overhead safeties, 1 1/2 hp variable speed drive. 1375
139
3" x 8" Reliable, self-con-tained, overhead & knee safeties. 1.5 hp motor/drive.
1786
138
3"x8" Reliable, chromed rolls, safeties, dual vari-able speed drives, controls, 460V 3PH.
1357 141
3" x 7" Farrel, chromed rolls, two 1 1/2 HP motors/drives, variable speed, etc.
1445
142
NEW 16”x40” MILL1729
• Variable Speed • 65HP/AC Motor
• Motorized Roll Gap Adjustment• 75HP Inverter Drive • Roller Bearings
3"x8" Thropp, knee & over-head safeties.
140
1376
16"x42" Farrel, chromed rolls, 50HP/460V motor, 56:1 reducer, unitized.
1803
161
14" x 30" Farrel, two piece base, stock guides, 75 HP motor, 460V/3PH.
1769
158
(3) 20"x24"x32" Farrel Cracker, direct drive, 28.6:1 reducer, two piece base, Motor, starter, safeties not included. 1437
159
12" x 30" Farrel, chromed rolls, bull gear & pinion, 40 HP motor, unitized. 157
1802 20"x24"x36" & 20"x24"x40" Bolling Cracker, direct connected, 2 piece base. Motor, starter, safeties not included.
1439/1448
160
INTERNAL MIXERS & MIXING ROOM IN STOCK
-Page 7- Tel: 330-263-7845 • e-mail: [email protected] • www.gomaplast.com
LABORATORY IN STOCK
MISCELLANEOUS IN STOCK
Alpha T2000 Tensile Tester, load cell, grips, exten-someter, etc.
1592
202
Monsanto Rheometer
1187
198
Monsanto Rhe-ometer R100
1742
197
TechPro Rheo-tech Rheometer
1547 196
Monsanto/Alpha ODR 2000 Rheometer
1822
195
Alpha MDR 2000 Rheometer1780
194
Monsanto Mooney Viscometer
1188 199
Lloyd L500 Tensile Tester, 2500 N load cell, 1000 mm travel, grips, printer, manual.
1377
200
Lloyd T5003 Tensile Tester, 500 N load cell, 1000 mm travel, chart recorder.
2011562
Precision Oven #22MM-10, Max 70° C, 120V, 1PH.
1512
210
(2) Precision Ovens, Max 270° C 120V, 1PH.
1510/1511209
Precision Oven, # 19, 120V, 3PH, 60W, 5A, Max 500°F.
1565 208
Blue M Oven, OV-712A, 120V/1PH, 975W, 100-500° F.
1101 207
(5) Hot Pack Blue M Ovens, 208V, 20A.
1490-1495
205
Precision Convection Oven, air flow control timer. 24" l-r x 24" f-b x 24" H. 240V/1PH.
1262
206
(6) Fisher/Precision Sci-entific Vaccum Ovens, 285/5851, 120V/1PH, 1000watts.
1583
204
(3) Monsanto T-10 Tensile Testers, load cell, exten-someter. grips, manual, etc.
2031440/1589/1591
Bridgeport Textron Mill, 2 hp motor, 3-axis CNC controls, dc servo motor.
1273 218
Thermal Fluid Heat Transfer System, 750°F, centrifugal pump, PID controller. expansion tank, SCR control.
1758 217
(10) 12" x 96" Dorner Belt Conveyors, Series 2100 & 2200, rubber belt, 1/4 HP drive. 440V/3PH.
1298
216
(2) Despatch 16000 Ovens, LFD1-42-2/16507, 230V/1PH, -20-350° F.
1486/1507212
Blue M Oven, AGC-136-MP, 208V/3PH, 0-350°F.
1497
211
Prodicon Slitter, Conveyor & Wig-Wag, Slitting w/ variable speed drive, 2 wig-wag units, etc.
1722
213
Versa 50 High Speed Flywheel Cutter, Model # 5021, max. 2" size, 12,000 cuts/min, 1 hp servo motor/drive.
1801
214 461
Wardwell Braider, double deck, 24 spindles/ deck, 2 variable speed drives, winding unit.
215
1753
270 Lt Farrel Banbury® F270-T, unidrive, hopper, body, spare rotors, etc.
191
70 Lt Guix-745 Banbury®,drop door, 250/125 HP motor, direct drive, reducer, controls.
1404
190
16.5 Lt. Farrel # 1D Banbury®, drop door, 150HP/460V 2 speed mo-tor, unitized, direct drive.
1441
188
16.5 Lt. Farrel Banbury®, swing-side door, bull gear & pin-ion, unitized, 75 hp motor.
923
187
1466/1467/1468
(3) 11D Mixers, Drop Door, drilled sides.
#11D Banbury® Mixer Body
193
192
14691891848
35 Lt Kneader, 60KW motor, oper-ator con-trols, variable speed, direct drive, air oper-ated ram & tilt body, unitized. Like new.
16.5 Lt. Farrel #1 Banbury®, 16.5 Lt, Swingside door, 125/62.5 HP motor, Reducer, Direct drive, Auto lube, Unitized.
1777
185
16.5 Lt. Banbury® Farrel, #1A, Slide Door, 100 HP/220V Motor.
313
184
3 Lt. Moriyama Disper-sion Mixer, tilt body, DR-20, 20 hp AC motor, variable speed.
1809
181
3 Lt. Farrel Banbury® “OO”, batch & temp. gauges, unitized.
1755
182
16.5 Lt. Farrel #1-D Banbury®, drop door, direct drive, 200 HP DC Motor/Drive, operator platform.
1762
186
3 Lt Farrel Banbury® "OO", 30HP/15HP motor, 2-speed, lube, unitized.
183
887
NEW Dosing & Weighing System, plastic FIFO storage bins, bag elevator & sliding cart, bin loading hopper, rear platform, 10-station rotational carousel, control station, RF cards & reader, bar code printer, scale, computer, etc.
1647 175
1.5 Lt. Farrel Ban-bury® “BR”, 25HP motor, 4-speed, unit-ized, 220V/3PH.
1603
177
1.5 Lt. Stewart Bolling, 30HP motor, unitized, 460V/3PH.
1763
178
1.5 Lt. Farrel Banbury® “BR”, 30HP motor, unitized. 1771
179
“00M” Kobelco, 1.66 Lt, 2-wing, 30HP AC motor, variable speed, controls, air operated door w/ safety guards. 1818
180
1.5 Lt Farrel Banbury® "BR", 7.5HP/220/440V vari-able speed motor/drive.
1529
176