ABRASION

UP TO 1500 CYCLES ( ANSI A3 )

250 CYCLES ( ANSI A1 )

CUT

1400 GRAMS ( ANSI HIGH A3 )

800-1000 GRAMS ( ANSI A2 TO LOW A3 )

TOTAL COST OF OWNERSHIP

9 PAIRS OF GLOVES PER EMPLOYEE PER YEAR*55% SAVING

26 PAIRS OF GLOVES

PER EMPLOYEE PER YEAR*

Dyneema® Diamond Technology: 50-60% Aramid: 100%

* Calculation based on average use in industrial environment using gloves with equivalent protection.

Dyneema® Diamond Technology is 40% lighter than aramid fiber, and offers a 300% improvement in cut resistance when compared to aramid.

New standard Dyneema® Diamond Technology.

The greatest evolution in cut protection in a generation.

DDT_InfoSheet_USA.indd 1 23/06/16 15:28

ABRASION

UP TO 1500 CYCLES ( ANSI A3 )

250 CYCLES ( ANSI A1 )

CUT

1100-1400 GRAMS ( ANSI A3 )

800-1000 GRAMS ( ANSI A2 TO LOW A3 )

Dyneema® Diamond Technology: 50-60% Aramid: 100%

RETAINS HEATCOMFORT

STAYS COOL

New standard Dyneema® Diamond Technology.

The greatest evolution in cut protection in a generation.Sleeves made with Dyneema® Diamond Technology fiber are more comfortable to wear because they stay cool on the skin and feel soft. This is critical because sleeves cover more exposed skin than other PPE, such as gloves, making comfort essential for protection during a full shift.

For more information visit dyneema.com

DDT_InfoSheet_USA.indd 2 23/06/16 15:28