HP-A4BL D/A CONVERTER & HEADPHONE AMPLIFIERNEW PRODUCT

FOSTEX COMPANYA Division of Foster Electric Co., Ltd.

URL : www.fostexinternational.comMail : info_sales@fostex.jp

MAIN FEATURES* Equipped with 4-pin XLR balanced output* Newly developed audio-grade capacitor is adopted* Highly precise crystal with low phase noise is adopted* Playback 24bit/192kHz PCM and 11.2MHz DSD audio* High performance DAC (Barrbrown PCM1792A) is equipped* Asynchronous transfer up to 192kHz/24bit compatible with USB Audio 2.0* HI/LO Gain selection (10dB) for wider selection of headphones* Digital Filter selecting Roll-Off characteristics and Cut-off frequencies

SPECIFICATION<Inputs>[USB] terminalInterface :USB 2.0 Hi SpeedSampling Frequencies :PCM 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz DSD 2.8MHz, 5.6MHz, 11.2MHzQuantization :16bit, 24bit[Digital In] terninalConnector :Optical, SquareFormat :S/PDIFSampling Frequencies :44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzQuantization :16bit, 24bit

<Outputs>[PHONES BALANCED] terminalConnector :XLR (4-pin)Maximum output :300mW or more (32 ohm)Load impedance :16 - 600 ohmTHD :less than 0.04% (at 1kHz)Frequency Response :20Hz - 80kHz (+-3dB, 32 ohm, 100mW)

[PHONE UNBALANCED] terminalConnector :1/4" stereo jackMaximum output :300mW or more (32 ohm)Applicable load impedance :16 - 600 ohmTHD :less than 0.04% (at 1kHz)Frequency Response :20Hz - 80kHz (+-3dB, 32 ohm, 100mW)

[OUTPUT] (L,R) terninal (Analog output)Connector :RCA PinReference output level :2Vrms (0 dBFS)Applicable load impedance :less than 10k ohmTHD :less than 0.01% (at 1kHz)Frequency Response :20Hz - 80kHz (+-3dB)

[DIGITAL OUT] terminalConnector :Optical (square)Format :S/PDFFrequency Response :44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHzQuantaization :16, 24bit

<General>[microSD] card slot (for firmware upgrade only)Format: FAT32Compatible card: microSD card (SDHC), up to 32GB

Accessories :Rubber foot (x4), USB cable, Manual, AC adapterPower supply :DC12VMeasurements :150(W) x 34(H) x 157(D)mm including protrusionWeight :approx. 630g

TR-70 / TR-80 / TR-90 STEREO HEADPHONESNEW PRODUCTS

The brand-new TR-series is a new line of premium professional dynamic headphones from Fostex. The line consists of six different headphones in three different housing designs and in two different impedance to meet various demands from the market. The headphone drivers, housings and other elements have been newly designed and tuned from the ground up for the best performance in various circumstances.

FOSTEX COMPANYA Division of Foster Electric Co., Ltd.

URL : www.fostexinternational.comMail : info_sales@fostex.jp

MAIN FEATURES* Freshly-developed proprietary 40mm drivers and specially tuned housings for accurate sound reproduction and serious monitoring.* The distinctive Fostex-signature "slide bars" are featured in the housing design* Each pair comes with two sets of ear pads (standard and extra thick) and two different cables (coiled and straight) as well as 1/4" to 3.5mm plug adapter.

TR-70(80) Open type, 80ohm

TR-70(250)Open type, 250ohm

TR-80(80) Closed type, 80ohm

TR-70(250)Closed type, 250ohm

TR-90(80) Semi-open type, 80ohm

TR-90(250)Semi-open type 250ohm

TH-900mk2 PREMIUM STEREO HEADPHONES

NEW PRODUCT

FOSTEX COMPANYA Division of Foster Electric Co., Ltd.

URL : www.fostexinternational.comMail : info_sales@fostex.jp

MAIN FEATURESNew detachable connectors for cable replacement. Optional balanced cable, model ET-H3.0N7BL is also available for balanced connectionUnique designed Neodymium magnetic circuit adopting the magnetic repulsion system with 1.5 tesla (15,000 gauss) magnetic flux density to achieve wider dynamic rangeThe detachable unbalanced cable is made of 7N grade (99.99999%) OFC and highly durable duralumin plug caseProprietary "Biodyna" diaphragm for fine and high resolution sound reproductionThe housings are finished by Japanese traditional "Urushi" lacquer by a 110 years old artisan group in "Bordeaux" finish on Japanese Cherry Birch.The ear pads are made of protein leather made from eggshell membrane for maximum comfort.

SPECIFICATIONTypeDriverImpedanceSensitivityMaximum input powerFrequency ResponseWeightCablePlugAccessories

ET-H3.0N7BL ET-H3.0N7UBBalanced replacement cable made of 7N grade (99.99999%) OFC (Oxygen Free Copper)*4-pin XLR gold plated plug* Rhodium plated terminal* Length: 3m* Weight: 130g

Unbalanced replacement cable made of 7N grade (99.99999%) OFC (Oxygen Free Copper)* Gold plated 1/4" stereo plug* Rhodium plated terminal* Length: 3m* Weight: 120g

:Dynamic:50mm dia, neodymium magnet:25 ohm:100db/mW:1,800mW:5 - 45,000Hz:approx. 390g (excluding cable):3m, Y type, 7N-OFC:gold plated 1/4" stereo plug:Stand, carrying pouch

*

*

*

*

*

*

REPLACEMENT CABLE

T20RPmk3 / T40RPmk3 / T50RPmk3The RPmk3 series are successor models to the reputed RPmk2 series that have been used in many professional recording studios for monitoring. The key Fostex proprietary Regular Phase (RP) Technology diaphragm incorporated driver unit has been refined to deliver sharper audio reproduction for more accurate monitoring. The housing, ear pad and head pad have also been re-designed to derive the maximum performance of the RP driver.

FOSTEX COMPANYA Division of Foster Electric Co., Ltd.

URL : www.fostexinternational.comMail : info_sales@fostex.jp

MAIN FEATURES* Refined Fostex proprietary Regular Phase (RP) diaphragm driver using copper foil etched polyimide film* Thee types: Open (T20RPmk3), Closed (T40RPmk3) and Semi-open (T50RPmk3)* Re-designed low repulsion ear pad and head pad for maximum comfort* Detachable cable for best serviceability* 3.5mm stereo mini jack cable also included for portable audio player

T20RPmk3Open type

T40RPmk3Closed type

T50RPmk3Semi-open type

STEREO HEADPHONES

Detachable cable

Low repulsion ear pad