NEW! CANTILEVER SERIES - Ballymore · ANSI standards † CAL OSHA available TREAD TYPES AVAILABLE: (X) Expanded Metal - Standard † (P) Perforated † (R) Abrasive Mat † (G) Heavy

ROLLINGLADDERS•SAFETYLADDERS•PERSONNELLIFTS•WORKPLATFORMS

Custom Ladders and Platforms to Fit Your NeedsExceeds OSHA/ANSI Standards

Short Lead Times • Uncompromising Quality • Exceptional Service

Ballymore 3135 Lower Valley RoadParkesburg, PA 19365

SEE PAGE 3 SEE PAGE 11SEE PAGE 6 SEE PAGE 17

Providing Rolling Ladders For Over 60 Years!Call for pricing or visit our website www.ballymore.com

SEE PAGE 14

NEW!

Fork DeckStainless

Steel Aluminum

Phone: 610.593.5062 • Fax: 610.593.8615 • TOLL FREE: 800.762.8327w w w. B A L LYMORE . c o m

ED IT ION 2

Ballymore • 3135 Lower Valley Road • Parkesburg, PA 19365Phone: 610.593.5062 • Toll Free: 800.762.8327 • Fax: 610.593.8615

w w w. B A L LYMORE . c o m

CANTILEVER SERIES

• 300 lb capacity• 59 degree slope• High quality 5” x 2” locking

casters• Powder coat fi nish• Heavy-duty 1” x 2” rectangular

tube frame• Ships KD to prevent freight damage

and lower freight cost

STANDARD ROLLING LADDERS WITHSPRING LOADED CASTERS

• Mounted on four spring loaded swivel casters that retract under user’s weight

• Working heights up to 12’• 7” deep steps with 10” deep top step

on 1 - 4 step models shown with (*) or (**)• 14” deep top step on 4 - 7 step FSH models• Comes standard with expanded metal tread,

optional treads available• 1 - 4 step ladders(*) & (**) ship unassembled in a

box, eligible for UPS;4 -7 step FSH models ship unassembled

• Specify set-up (SU) if required***• 450 lb. capacity• Gray powder coat fi nish• Built to OSHA and ANSI standards• CAL OSHA available

1 - 4 STEP

**Handrails may ship in separate box *** May result in higher freight costs*Eligible for UPS

LS2247LS3247LS4247

LS32410LS42410

23434

1928.538

28.538

3644514652

24 x 1724 x 2324 x 3024 x 2824 x 35

10 x 24 x 4110 x 24 x 5210 x 24 x 6514 x 24 x 6214 x 24 x 72

YESYES

YES* YES* YES*

MODEL #STEPS

INCLUDINGTOP STEP

TOP STEPHEIGHT WGT Lbs.

OPENWIDTH

AND LENGTH

FOLDEDDIMENSIONS

SHIPS UPS(Oversize)

Try Ballymore’s Lock-N-Stock and New Modifi ed Lock-N-Stock. Both Ladders have a 58° slope and 7” Deep Steps. Our Standard Lock-N-Stock has 7” Deep Top Step where as our Modifi ed Lock-N-Stock has a 10” Deep Top Step. Our Standard Lock-N-Stock has 22” high handles where as our Modifi ed Lock-N-Stock has 30” handrails along with a rear guard rail.

• Welded construction• No hinge to break• Heavy duty rated for 350 pounds• 16” wide steps• Easy to maneuver in the open or closed

positions• Locks in the folded or climbing positions• Approximately 10” deep when folded for

easy storage• Built to ANSI standards

LOCK-N-STOCK AND NEW MODIFIED LOCK-N-STOCK

FSH526X

1 STEP2 STEP3 STEP4 STEP

2 STEP3 STEP4 STEP4 STEP5 STEP6 STEP 7 STEP

16” WIDE STEP 24” WIDE STEPSTEPS INCLUDING TOP STEP MODEL # BASE

W” x L”WGTLbs. MODEL # BASE

W” x L”WGTLbs.

118*218*318*418*

H218**H318**H418**FSH418FSH518FSH618FSH718

18 x 1620 x 1920 x 2520 x 31

20 x 1920 x 2520 x 3120 x 3520 x 4224 x 4924 x 56

18223142

36455668758389

126*226*326*426*

H226**H326**H426**FSH426FSH526FSH626FSH726

26 x 1630 x 1930 x 2530 x 31

30 x 1930 x 2530 x 3130 x 3530 x 4230 x 4930 x 56

20283651

425065808798

108

WITH HANDRAILS

TOP STEP

OVER ALL

NO HANDRAILS1219

28.538

1928.53840506070

1219

28.538

4958.568738393

103

HEIGHT INCHES

2 3

LLLLLLLLLLLLLLLLLLLLL

w w w. B A L LYMORE . c o mPhone: 610.593.5062 • Fax: 610.593.8615

HOW TO SELECT THE RIGHT ROLLING LADDERFOR YOUR APPLICATION

Size Considerations• Select Platform Height, also known as Top Step Height, based on operations

being performed.• Platform Height is where the user generally stands. Make sure you have

minimum clearance of 6 to 7 feet from the ceiling or any object suspended from the ceiling to insure the user has room to stand safely.

• Maximum convenient working height is 5 feet to 6 feet above the platform height.

• For larger ladders, choose a wide ladder over a narrow one if space permits. For bulky loads, consider a stairway slope ladder and/or deeper top step.

• Consider limitations on ladder dimensions imposed by doorways, aisle width and corners the ladder needs to turn. For tight spaces, select a narrow or all directional ladder for maximum maneuverability.

Note: Load capacity (lbs.) is the combined weight of the user and materials.

Lockstep Ladder Spring Loaded Casters

Abrasive Mat Tread (R):Great in a clean retail environment.

Perforated Tread (P):Provides excellent slip resistance. This tread

design is used extensively in retail and storeroom applications.

Expanded Metal Tread (X):This aggressive tread is ideal for the warehouse

or retail fl oor. This design is self-cleaning allowing foot debris to fall through the tread.

Serrated Tread (G):The most aggressive. This tread design is ideal for the shop fl oor or any industrial application where

maximum slip resistance is required.

TREAD SELECTION GUIDE

Shipping:• Ballymore’s Patented bolt in top

step allows ladders to be boxed• Ballymore’s ladder in a box

program: - Lower freight cost - Eliminate freight damage - Provides ability to stock

ladders

PATENTEDPATENTED

Weight Actuated Lockstep Ladder

Climbing PositionThe typical incline of a rolling ladder is designed for the user to ascend and descend facing the steps. However, “Stairway Slope” or “Walk Down” ladders have a more moderate incline, approximately 50 degrees, enabling the user to descend facing forward which is safer and more stable while carrying heavier and bulky objects.

Material TypeSteel: For all around general purpose.Stainless: For corrosive environment as well as outdoor use.Aluminum: Like Stainless, they are corrosion resistant making them ideal for both indoor and outdoor use.

Locking Mechanisms• Weight Actuated Lock Step: This Patented state of the art lock step automatically actuates when 70 lbs.

of weight is applied to the stair section. Safest most durable lock step on the market today.• Standard Lock Step Ladders: Ideal for applications over 5 steps. These ladders are raised into the rolling

position when the lock step is actuated. Releasing the lock step drops the ladder into the climbing position with the feet fi rmly on the fl oor.

• Spring-loaded Casters: Ideal for shorter ladders 5 steps and below. On this style ladder, the wheels retract under the user’s weight securing the ladder to the fl oor.

Patent No.: US 7,828,115 B2*Oversize 90lbs

LS3247 LS3247 LS42410


M-2000 SERIES ROLLING SAFETY LADDERS

*Must be skidded. See price sheet for skidding cost.

4 5

EXPANDED METAL

STANDARD OR

SPECIFY ALTERNATE

TREAD WHEN

ORDERING

Expanded Metal Tread (X)

Perforated Tread (P)

Heavy Duty Serrated Grating (G)

Abrasive Mat Tread (R)

Heavy DutyEasy

Operating Lockstep

• 450 lbs. capacity• Easy to use footpedal activated lockstep• High quality casters with bearing and dust cover• 14” deep top step• Ladders ship knocked-down for freight savings • Fully assembled ladders available - specify (SU) set-up• Expanded metal tread standard or specify alternate tread• Manufactured with rigid 1” OD tubing• 30” high handrails• 21”and 28” deep top step available (see below)• Available with Rear Guardrail removed for easy walk through• Gray powder coat fi nish• Built to OSHA and ANSI standards• CAL OSHA available

HEIGHT INCHES

*M b kkkkkikikkk ddddddd d S i h f kidk di

HEIHEIHEIHEIHEIHEIHEIGHTGHTGHTGHTGHTGHTGHT INININININININCHECHECHECHECHECHECHESSSSSSSSTEPS INCLUDING

TOP STEP

5 STEP 6 STEP 7 STEP8 STEP24” WIDE STEP WITH 32” - 40” WIDE BASE5 STEP 6 STEP 7 STEP 8 STEP 9 STEP10 STEP11 STEP12 STEP 13 STEP*14 STEP*15 STEP*

16” WIDE STEP WITH24” WIDE BASE

TOP STEP

OVERALL

MODEL#

BASEW” x L”

WGTLbs.

50607080

5060708090100110120130140150

8393103113

8393103113123133143153175185195

052414062414072414082414

053214063214073214083214093214103214113214123214134014144014154014

24 x 4324 x 4924 x 5524 x 61

32 x 4332 x 4932 x 5532 x 6132 x 6832 x 7432 x 8032 x 8740 x 9440 x 10040 x 106

91100109127

110122143160175193205220250280310

HEIGHT INCHES

BALLYMORE INTRODUCES “THE NAVIGATOR”

• Available 7-10 Steps• Standard or folding side rails• All Direction design• 450 lbs. capacity• Abrasive mat tread, other treads available• Patented weight activated lockstep is standard

• 14” Deep Top Step• Gray powder coat fi nish• Ships unassembled and boxed, available assembled• Meets OSHA and ANSI• CAL OSHA available


M-2000 SERIES DEEP TOP STEP LADDERS• All features of the standard M-2000 line with a Deep Top

Step to provide a larger and more comfortable work space• No rear guard rail available for easy walk through• Side exit available on 28” deep top step models

STEPS INCLUDINGTOP STEP

5 STEP 6 STEP 7 STEP8 STEP24” WIDE STEP WITH 32” - 40” WIDE BASE5 STEP 6 STEP 7 STEP 8 STEP 9 STEP10 STEP11 STEP12 STEP 13 STEP*14 STEP*15 STEP*

16” WIDE STEP WITH24” WIDE BASE

TOPSTEP

OVERALL

MODEL#

BASEW” x L”

WGTLbs.

MODEL#

BASEW” x L”

WGTLbs.

50607080

5060708090100110120130140150

8393103113

8393103113123133143153175185195

052421062421072421082421

053221063221073221083221093221103221113221123221134021144021154021

24 x 5024 x 5624 x 6224 x 68

32 x 5032 x 5632 x 6232 x 6832 x 7532 x 8132 x 8732 x 9440 x 10140 x 10740 x 113

102111120138

121133154171186204216231261291321

052428062428072428082428

053228063228073228083228093228103228113228123228134028144028154028

24 x 5724 x 6324 x 6924 x 75

32 x 5732 x 6332 x 6932 x 7532 x 8232 x 8832 x 9432 x 10140 x 10840 x 11540 x 120

113122131149

132144165182197215227242272302332

HEIGHT INCHES 21” DEEP TOP STEP 28” DEEP TOP STEP

• Turns in its own radius

• Easy to use footpedal activated lockstep

• 14” deep top step• 450 lbs. capacity• Gray powder coat

fi nish• Built to OSHA and

ANSI standards• CAL OSHA available

TREAD TYPES AVAILABLE:(X) Expanded Metal - Standard • (P) Perforated • (R) Abrasive Mat • (G) Heavy Duty Serrated Grating

PLEASE SPECIFY WHEN ORDERING

ALL DIRECTION LADDERSMOVES LATERALLY TO FIT IN TIGHT CORNERS AND CLOSE TO SHELVES

Built to OSHA and ANSI

Rolls on 4 swivel casters allowing ladders to move in ALL DIRECTIONS. Rigid casters on rear provide

easy transition between fl oor types.

16” WIDE STEP6 STEP 7 STEP8 STEP24” WIDE STEP6 STEP 7 STEP8 STEP9 STEP10 STEP11 STEP12 STEP

607080 60708090

100110120

93103113

93

103113123133143153

PIP-6PIP-7PIP-8

PIP-6-32PIP-7-32PIP-8-32

PIP-9PIP-10PIP-11PIP-12

24 x 4924 x 5524 x 61

32 x 4932 x 5532 x 6132 x 6832 x 7432 x 8032 x 87

110125140

133154171186204216231

HEIGHTINCHES

STEPS INCLUDING TOP STEP TOP

STEPOVERALL

MODEL#

BASEW” x L”

WGTLbs.

Ships KD to reduce freight costs

EASY ASSEMBLYSet up available - Specify SU

789

10

708090

100

108113123133

NAV-7RSNAV-8RSNAV-9RS

NAV-10RS

24 x 5124 x 5724 x 6324 x 69

160176192210

STEPSINCLUDING TOP

STEP

TOP STEPHEIGHT

OVERALLHEIGHT MODEL # BASE

W x LWEIGHT(Lbs.)

789

10

708090

100

108113123133

NAV-7RFNAV-8RFNAV-9RF

NAV-10RF

24 x 5124 x 5724 x 6324 x 69

160176192210

THE NAVIGATOR WITH FOLDING SIDE RAILS

THE NAVIGATOR WITH STANDARD FIXED RAILS

Specifi cally designed to provide easy access to narrow aisles and tight spaces. A safer option to “A” frame ladders, the Navigator includes handrails and a more gradual climbing slope. The weight actuated lockstep gives the ladder a

very secure feel when climbing. Can reduce accidents and worker’s compensation claims.


6 7

ALLOWS FORWARD FACING DESCENT

50o SLOPE WALK DOWN LADDER

Available with ALL DIRECTIONAL option(Recommended on all 10, 11 and 12 step models)

• 50o stairway slope, allows forward facing descent

• Easy to use footpedal activated lockstep• 14” deep top step standard• 21” and 28” deep top steps available• 450 lb. capacity• Perforated tread standard, or specify

alternate tread type• Ships unassembled for freight cost

savings - for set-up specify SU• Gray powder coat fi nish• Available with Rear Guardrail removed

for easy walk through• Built to OSHA and ANSI standards• CAL OSHA available

TREAD TYPES AVAILABLE:(X) Expanded Metal (P) Perforated - Standard(R) Abrasive Mat (G) Heavy Duty Serrated Grating

Optional Replaceable Skid Plate for rough

surfaces

LADDER REPLACEMENT PARTS & OPTIONSRear Exit or Side Exit Available

• 28” deep top step required for Side Exit

• Please confi rm freight classifi cation and packing charge

• Not available on ladders with spring loaded casters

• See price list for cost*Must specify # of steps and width(Set includes casters, springs, rubber tips and hardware)

Ladder Shelves and TraysHanging ShelfHanging Tray

*M*M*M*Mu tst spe ffififcif ###y # ffffof tsteps anddddd w ddididtidthhhhh****

# Per Set2” Replacement Casters Sets3” Replacement Casters Sets

Replacement SpringsReplacement Rubber Tips

4” Replacement Casters Sets10” Rubber Wheels

Part #444442

*PR-2*PR-3

PSPTHDSSBR-4FW-2

HEAVY DUTY STAIRWAY SLOPE LADDERS• HEAVY DUTY - RUGGED 600 lbs. capacity• 50o stairway slope (for easy forward ascent

or descent)• Top step is 14” deep for additional comfort• 10” intermediate steps• 21” and 28” deep top steps available • Easy operating lockstep secures ladder to the fl oor• Gray powder coat fi nish• All direction option available• Exceeds OSHA and ANSI standards• Available with Guardrail

removed for easy walk through• CAL OSHA available

5 STEP6 STEP 7 STEP8 STEP9 STEP10 STEP11 STEP12 STEP

TOPSTEP

OVERALL

MODEL #

BASEW” x L”

WGTLbs.

HEIGHTINCHESSTEPS

INCLUDING TOP STEP

5060708090100110120

8393103113123133143153

HDS-5HDS-6HDS-7HDS-8HDS-9HDS-10HDS-11HDS-12

32 x 5032 x 5832 x 6632 x 7432 x 8232 x 9032 x 9832 x 106

132152178204227245278297

TREAD TYPES AVAILABLE:(X) Expanded Metal (P) Perforated (R) Abrasive Mat(G) Heavy Duty Serrated GratingPLEASE SPECIFY WHEN ORDERING

Pedal Activated Lockstep

THE MONSTER LINE ROLLING SAFETY LADDEREXTRA HEAVY DUTY 600 Lbs. Capacity!Standard Features:• 21” deep top step - standard• Base frame and rear vertical are

rugged 2” x 1” rectangular tubing• 59 degree slope• Weight Actuated Lockstep• 24” wide steps – available in 3 step tread

types• High quality non-marking wheels with roller

bearings and dust cover• Rear corner bumpers - standard• All-Directional option available• Gray powder coat fi nish• Available with Rear Guardrail removed for

easy walk through• Exceeds OSHA and ANSI standards• CAL OSHA available• Certifi ed in Ontario, Canada

EXPANDED METAL STANDARD OR

SPECIFY ALTERNATE TREAD WHEN

ORDERING

Expanded Metal Tread (X)E d d M t l T d (X)

Perforated Tread (P)Perforated Tread (P)

Heavy Duty Serrated Grating (G)D t S t d G ti (G)tt SD

TotalNumberof Steps Top

StepOverAll

BallymoreModel

Number

BaseW” x L”

WeightLbs

6 STEP7 STEP8 STEP9 STEP10 STEP11 STEP12 STEP13 STEP14 STEP15 STEP

60708090100110120130140150

93103113123133143153175185195

ML063221ML073221ML083221ML093221ML103221ML113221ML123221ML134021ML144021ML154021

32” x 56”32” x 62”32” x 68”32” x 75”32” x 81”32” x 87”32” x 94”40” x 101”40” x 107”40” x 113”

165189209227248263281314347380

HeightInches


16” Wide Step5 STEP 6 STEP 7 STEP8 STEP24” Wide Step5 STEP 6 STEP 7 STEP 8 STEP 9 STEP10 STEP11 STEP12 STEP

50607080

5060708090100110120

8393103113

8393103113123133143153

SW524SW624SW724SW824

SW532SW632SW732SW832SW932SW1032SW1132SW1232

24 x 5124 x 5924 x 6824 x 76

32 x 5132 x 5932 x 6832 x 7632 x 8432 x 9832 x10132 x 109

96109122135

115120139165180200210230

HEIGHT INCHESSTEPS

INCLUDING TOP STEP TOP

STEPOVERALL

MODEL #

BASEW” x L”

WGTLbs.


STOCK PICKING LADDERS• Combines the benefi ts of a rolling

safety ladder and a stock-picking cart

• 16” or 24” wide steps, choice of 14” deep top step or21” deep top step

• Sturdy - 2 shelves on 6 - 7 step models - 3 shelves on 8 - 12 step

models• Combined 600 lbs. capacity - Maximum 450 lbs. for ladder - Maximum 300 lbs. for storage

shelves• Gray powder coat fi nish• CAL OSHA available• Boxed to reduce freight costs and

risk of damage• Built to OSHA and ANSI

standards

TOP STEP

OVERALL

MODEL #

BASEW” x L”

WGTLbs.

16” WIDE TREAD14” Deep Top Step6 STEP 7 STEP8 STEP16” WIDE TREAD21” Deep Top Step6 STEP 7 STEP8 STEP24” WIDE TREAD14” Deep Top Step6 STEP 7 STEP8 STEP9 STEP10 STEP11 STEP12 STEP24” WIDE TREAD21” Deep Top Step6 STEP 7 STEP8 STEP9 STEP10 STEP*11 STEP*12 STEP*

STEPSINCLUDING TOP STEP

607080

607080

60708090100110120

60708090100110120

93103113

93103113

93103113123133143153

93103113123133143153

SPL-6-14NSPL-7-14NSPL-8-14N

SPL-6-NSPL-7-NSPL-8-N

SPL-6-14SPL-7-14SPL-8-14SPL-9-14

SPL-10-14SPL-11-14SPL-12-14

SPL-6SPL-7SPL-8SPL-9SPL-10SPL-11SPL-12

24 x 4924 x 5524 x 61

24 x 5624 x 6224 x 68

32 x 4932 x 5532 x 6132 x 6832 x 7432 x 8032 x 87

32 x 5632 x 6232 x 6832 x 7532 x 8132 x 8732 x 94

8089

120

91100131

150166205215225235250

160176215225235245260

HEIGHTINCHES


8 9


Features:• This state of the art lockstep has only

one pedal which lifts the ladder into the rolling position

• Climb the ladder and your weight activates the lockstep – locking the ladder to the fl oor in the climbing position

• 450 lbs. capacity• Available in both 59° Ladder Slope or

50° Stairway Slope• 14” deep top step standard

21” and 28” available• Durable–manufactured with

1”OD tubing• Built to OSHA and ANSI standards• Gray powder coat fi nish• CAL OSHA available

WEIGHT ACTUATED LOCKSTEP LADDERSThink Safety... Buy Weight Actuated!

Weight Actuated Lock Step

Product Specifi cations are subject to change without notice. Please confi rm critical specifi cations.

Ship Prepaid and Add to take advantage of freight cost reductions with our carrier.

Ladder Inspection ProcedureShipments are made FOB factory. Each product has been inspected before shipment. Consignee is responsible to inspect material at time of delivery, and should refuse shipment or make written notice to carrier upon receipt of damaged materials.

Carriers and Ballymore will not accept claims if damage is not noted at the time of delivery.

Freight Ballymore can provide estimated freight cost based on our preferred carriers. Note: Costs are subject to change depending on fuel surcharges, special delivery requirements, etc. Ballymore will not be responsible for differences in freight estimates and actual freight costs.

On collect or 3rd party billing shipments, any freight claims must be handled by the customer, including refused shipments.

Single pedal lifts ladder into rolling position.

Apply 70 pounds of pressure to the steps and the ladder automatically drops the front feet to the ground securing the ladder to the fl oor for safe climbing.

The most durable lock step on the market today! Designed using fi nite element analysis and then robotically tested. Prototype units achieved more than 60,000 cycles before replacing latch hook. Then 60,000 more cycles.


StepOverAll

59° Ladder Slope

Model#

59° Ladder Base

W” x L”

WeightLbs

16” WIDE STEP5 STEP6 STEP7 STEP8 STEP

24” WIDE STEP5 STEP6 STEP7 STEP8 STEP9 STEP

10 STEP11 STEP12 STEP13 STEP14 STEP15 STEP

50607080

5060708090

100110120130140150

8393

103113

8393

103113123133143153175185195

WA052414WA062414WA072414WA082414

WA053214WA063214WA073214WA083214WA093214WA103214WA113214WA123214WA134014WA144014WA154014

24 x 4324 x 4924 x 5524 x 61

32 x 4332 x 4932 x 5532 x 6132 x 6832 x 7432 x 8032 x 8740 x 94

40 x 10040 x 106

91100109127

110122143160175193205220250280310

HeightInches

WARRANTY (All products including lifts)Company warrants these products to be free from defects in material and workmanship for a period of one year from date of original purchase. Component parts carry individual warranties as provided by the manufacturer. Our warranty does not extend to parts or end products subjected to misuse, neglect, damage in shipment, by accident or failure to comply with operating instructions. We will repair or replace any unit which is defective during the warranty period if that unit is returned to our factory properly packaged with transportation charges paid. Claims for unauthorized fi eld labor or time charges will not be accepted. Company will not be responsible for any consequential damages of any nature.

RETURN POLICY Written factory permission must be received prior to return. Returns must be in good condition and made within 30 days of original shipment. Freight prepaid. Restocking charge of 20 - 25% on standard items, 50% on aluminum and stainless.

NON-REFUNDABLE ITEMSCustom or modifi ed ladders, work platforms, crossovers, modifi ed or custom lifts.

Minimum Order: $15.00, Prepay and add shipments are subject to $5.00 service charge.

Features:• Patented state of the art

lockstep is the most durable in the industry

• Climb the ladder and your weight activates the lockstep - locking the ladder to the fl oor in the climbing position

• Rolls on 4 swivel casters allowing ladder to move inALL DIRECTIONS

• 450 lbs. capacity• 14” deep top step standard,

21” and 28” available• Durable - manufactured with

1” O.D. steel tubing• Gray powder coat fi nish• Built to OSHA and ANSI

standards• CAL OSHA available

F•

•

••

•

••

•

WEIGHT ACTUATED LOCKSTEP LADDERSSTAIRWAY SLOPE 50 DEGREE

Features:• Patented state of the art lockstep is the most durable in the industry• Climb the ladder and your weight activates the lockstep - locking the ladder to the fl oor

in the climbing position• 50° stairway slope allows easy forward descent• 450 lbs. capacity• 14” deep top step standard, 21” and 28” available

• Durable - manufactured with 1” O.D. steel tubing• Available with ALL DIRECTION option (recommended for 10, 11 and 12 step models)• Gray powder coat fi nish• Available with Rear Guardrail removed for easy walk through• Built to OSHA and ANSI standards• CAL OSHA available


StepOverAll

50° Stairway Slope All

Directional Model#

50° Ladder Base

W” x L”

WeightLbs

HeightInches



10 STEP11 STEP12 STEP

50607080

5060708090

100110120

8393

103113

8393

103113123133143153

WA-AD-SW-052414WA-AD-SW-062414WA-AD-SW-072414WA-AD-SW-082414

WA-AD-SW-053214WA-AD-SW-063214WA-AD-SW-073214WA-AD-SW-083214WA-AD-SW-093214WA-AD-SW-103214WA-AD-SW-113214WA-AD-SW-123214

24 x 5024 x 5824 x 6624 x 74

32 x 5032 x 5832 x 6632 x 7432 x 8232 x 9032 x 98

32 x 106

96109122135

115120139165180200210230

Expanded Metal Tread (X)Perforated Tread (P)

Heavy Duty Serrated Grating (G) Abrasive Mat Tread (R)

PATENTEDPATENTED

Patent No.: US 7,841,447 B2

WEIGHT ACTUATED LOCKSTEP LADDERSALL DIRECTIONAL OPTION


StepOverAll

59° Model# All Directional

Option

59° Ladder Base

W” x L”

WeightLbs




50607080

5060708090

100110120130140150

8393

103113

8393

103113123133143153175185195

WA-AD-052414WA-AD-062414WA-AD-072414WA-AD-082414

WA-AD-053214WA-AD-063214WA-AD-073214WA-AD-083214WA-AD-093214WA-AD-103214WA-AD-113214WA-AD-123214WA-AD-134014WA-AD-144014WA-AD-154014

24 x 4324 x 4924 x 5524 x 61

32 x 4332 x 4932 x 5532 x 6132 x 6832 x 7432 x 8032 x 8740 x 94

40 x 10040 x 106

91100109127

110122143160175193205220250280310

HeightInches

50° STAIRWAY

SLOPE ALLOWS USER TO DESCEND LADDER FACING

FORWARD

Non-StraddleBase

Straddle BaseModel # HL-4

Shown with optional 10” x 24” tool tray


10 11

TILT & ROLL LADDERS• Balanced design allows ladder to tilt easily and roll effortlessly on two 4” casters• 16” or 24” wide treads• 450 lbs. capacity• Expanded metal standard or specify alternate tread• Ships unassembled in a box• Fully assembled ladders available - specify (SU) set-up• Gray powder coat fi nish• Built to OSHA and ANSI Standards

Straddle BaseModel # HL-4

Shown with optional 10” x 24” tool tray

Ships unassembledin a box

Model # H318TR

Non-StraddleBase

Model # TR-3

FOLD-N-STORE LADDERS• Ladder can be easily folded for storage or

transportation• Tilt and roll mobility• Large 10” rubber wheels roll easily on rough

surfaces• 14” deep top step standard• Expanded metal step tread standard, or specify

alternate tread• 350 lb. capacity• Gray powder coat fi nish• Ships unassembled• Built to OSHA and ANSI standards

TREAD TYPES AVAILABLE:(X) Expanded Metal (P) Perforated (G) Heavy Duty

Serrated Grating

PLEASE SPECIFY WHEN ORDERING

TRTRAVAVAAV(X(X((P(((G(G

PPLPLPLPPWWW


30 inch handrails

16” Wide Treads

Optional Replaceable Skid Plate for rough

surfaces

Model # FAWL-6

TOPSTEP

OVERALL

TILT & ROLL MODEL #

BASEW” x L”

WEIGHTLbs.

ExtraFeatures

STEPSINCLUDINGTOP STEP

TR-24” Wide Step2 Step3 Step4 Step5 Step6 Step

HL-24” Wide Step2 Step3 Step4 Step5 Step6 Step

16” Wide Step2 Step3 Step4 Step




2030405060

2030405060

19.0 28.5 38.0

19.0 28.5 38.0

40.0 50.0 60.0

40.0 50.0 60.0

5363738393

5363738393

49.0 58.5 68.0

49.0 58.5 68.0

73.0 83.0 93.0

73.0 83.0 93.0

TR-2TR-3TR-4TR-5TR-6

HL-2NSHL-3NSHL-4NSHL-5NSHL-6NS

H218TRH318TRH418TR

H226TRH326TRH426TR

FSTR418FSTR518FSTR618

FSTR426FSTR526FSTR626

30 x 3430 x 4030 x 4630 x 5230 x 58

26 x 3226 x 3826 x 4426 x 5026 x 56

20 x 2420 x 3020 x 36

30 x 2430 x 3030 x 36

20 x 4020 x 4724 x 54

30 x 4030 x 4730 x 54

5060728496

657789

101113

364556

425065

687583

808798

WithTR-20”DTS

WithStraddle

Base

Ships unassembled in box - for

freightsavings14” DTS

Ships unassembled

in box - eligible for

UPS10” DTS

HEIGHT INCHES

• Increase productivity by making maintenance operations simple

• Base frame and rear vertical welment are rugged 2” x 1” rectangular tubing. Rails are sturdy 1” tubular steel.

• Self cleaning slip resistant serrated grating

• Easy to use heavy duty pedal activated lockstep with 4” casters

• 36” high handrails with midrail• Meets OSHA/ANSI requirements• Gray powder coat fi nish• Heavy duty 800 lb. capacity• Ships Unassembled

MOBILE WORK PLATFORMS


30”30”40”40”50”50”60”60”70”70”

24”36”24”36”24”36”24”36”24”36”

SEP3-24SEP3-36SEP4-24SEP4-36SEP5-24SEP5-36SEP6-24SEP6-36SEP7-24SEP7-36

136153151167165182178198193215

33 x 4838 x 4833 x 5438 x 5433 x 6038 x 6033 x 6638 x 6633 x 7338 x 73

151178165193178206193220209237

33 x 6038 x 6033 x 6638 x 6633 x 7238 x 7233 x 7838 x 7833 x 8538 x 85

172202186217199230215245230273

33 x 7238 x 7233 x 7838 x 7833 x 8438 x 8433 x 9038 x 9033 x 9738 x 97

193226207240220253237270251308

33 x 8438 x 8433 x 9038 x 9033 x 9638 x 9633 x 10238 x 10233 x 10838 x 108

STEPS PLATFORMHEIGHT

PLATFORM WIDTH MODEL # WEIGHT BASE

W” x D” WEIGHT BASEW” x D” WEIGHT BASE

W” x D” WEIGHT BASEW” x D”

MODEL WITH HANDRAILS 36” PLATFORM 48” PLATFORM 60” PLATFORM 72” PLATFORM





36” PLATFORM 48” PLATFORM 60” PLATFORM 72” PLATFORM

DOUBLE ENTRY PLATFORMS


30”30”40”40”

24”36”24”36”

SNR3-24SNR3-36SNR4-24SNR4-36

105121121138

33 x 4838 x 4833 x 5438 x 54

127143143160

33 x 6038 x 6033 x 6638 x 66

149150165182

33 x 7238 x 7233 x 7838 x 78

171187187204

33 x 8438 x 8433 x 9038 x 90





MODEL WITHOUT HANDRAILS 36” PLATFORM 48” PLATFORM 60” PLATFORM 72” PLATFORM

SINGLE ENTRY WORK PLATFORMS

Double EntryMOBILE PLATFORM

800 lbs. Capacity

ADD PLATFORM LENGTH TO MODEL #

WHEN ORDERING

WORK PLATFORM DESIGNED TO ACCOMODATE TWO WORKERS.

AVAILABLE IN ALUMINUM AND STAINLESS STEEL. CONTACT FACTORY

FOR PRICING.


30”30”40”40”50”50”60”60”70”70”

24”36”24”36”24”36”24”36”24”36”

DEP3-24DEP3-36DEP4-24DEP4-36DEP5-24DEP5-36DEP6-24DEP6-36DEP7-24DEP7-36

202226227248251270276297300319

33 x 6038 x 6033 x 7338 x 7333 x 8538 x 8533 x 9838 x 98

33 x 11038 x 110

220242245264271292295314319341

33 x 7238 x 7233 x 8538 x 8533 x 9738 x 97

33 x 11038 x 11033 x 12238 x 122

240262285289311314333334339362

33 x 8438 x 8433 x 9738 x 9733 x 10938 x 10933 x 12138 x 12133 x 13438 x 134

260282284306308330332352356380

33 x 9638 x 96

33 x 10838 x 10833 x 12138 x 12133 x 13338 x 13333 x 14638 x 146

5060708090100110120

8393103113123133143153

FAWL-5FAWL-6FAWL-7FAWL-8FAWL-9FAWL-10FAWL-11FAWL-12

30 x 4630 x 5230 x 5830 x 6430 x 7030 x 7630 x 8230 x 88

90100110120135148165175

5 STEP6 STEP7 STEP8 STEP9 STEP10 STEP11 STEP12 STEP

HEIGHTINCHESSTEPS

INCLUDING TOP STEP TOP

STEPOVERALL

MODEL#

BASE W” X L”

WGT Lbs.

500 lb. capacity

Make Uneven Surfaces Level

• Simply turn feet to adjust height• Place several units together to create

larger work areas

• Provide shorter workers with a more comfortable work position

• Heavy duty serrated grating provides excellent slip resistance

• Platforms 24” to 48” long, have 4 legs; longer platforms have 6 legs

• Gray powder coat fi nish

HEIGHTS from 5” to 8” Model # W” x L” Weight Model # W” x L”

AWP5-2424AWP5-2436AWP5-2448AWP5-2459AWP5-2471AWP5-2497

24 x 2424 x 3624 x 4824 x 5924 x 7124 x 97

38526680

106138

AWP9-2424AWP9-2436AWP9-2448AWP9-2459AWP9-2471AWP9-2497

24 x 2424 x 3624 x 4824 x 5924 x 7124 x 97

HEIGHTS from 9” to 14”

ADJUSTABLE HEIGHT STEEL WORK PLATFORM

SNR Series SEP Series

DEP Series


Tilt & Roll shown with 18” widesteps; serrated grating tread



12 13

ALUMINUM LADDERS• All welded• Aluminum mill fi nish, industrial grade welds• Ideal for use in banks, libraries & hospitals

and wash down applications• 350 lbs. capacity, yet lightweight design• Non-magnetic and non-sparking• Paint-free for pharmaceutical & food

applications• Solid ribbed tread or heavy duty serrated

grating • 10” standard deep top step• Optional 20” deep top step• Built to OSHA and ANSI standards

TREADS TYPES AVAILABLE:• SOLID RIBBED TREAD - Standard

• (G) Heavy Duty Serrated GratingPLEASE SPECIFY WHEN ORDERING

• All welded• 14” deep top step standard• 10” rear rubber wheels - Great on rough surfaces

• 300 lbs. capacity• Lightweight lift and roll wheelbarrow portability• Built to OSHA and ANSI standards

WHEELBARROW STYLE

Aluminum ladders are subject to a 50% restocking

charge

*Eligible for UPS 20” Deep top step available***EEli iiblbl fff UUUPSPS 20”2 DD tt ilil blbl

HEIGHT INCHES

STEPS INCLUDING TOP STEP

SPRINGLOADEDCASTERS

TILT &ROLL

TOP STEP

OVERALL

MODEL #

MODEL #

BASE W” X L”

WGTLbs.

18 “ WIDE STEPS2 STEP NO RAILS3 STEP NO RAILS4 STEP NO RAILS2 STEP3 STEP4 STEP24” WIDE STEPS2 STEP NO RAILS3 STEP NO RAILS4 STEP NO RAILS2 STEP3 STEP4 STEP5 STEP6 STEP7 STEP

1928.53819

28.538

1928.53819

28.538

47.557

66.5

1928.53849

58.568

1928.53849

58.568

77.587

96.5

A2S*A3S*A4S

A2SHA3SHA4SH

A2S30*A3S30A4S30

A2SH30A3SH30A4SH30A5SH30A6SH30A7SH30

---

A2SH-TRA3SH-TRA4SH-TR

---

A2SH30-TRA3SH30-TRA4SH30-TRA5SH30-TRA6SH30-TRA7SH30-TR

20 x 1920 x 2520 x 3120 x 1920 x 2520 x 31

30 x 1930 x 2530 x 3130 x 1930 x 2530 x 3130 x 3730 x 4330 x 49

152029212734

222835283441496067

*Models with 24” wide treads have 36” wide base

Bead-Blasted to provide smooth uniform fi nish

• Ideal for wash down and corrosive environments• Type T304 Stainless Steel construction• 1-3 step ladders are all welded and have 10” deep top step• 4-12 step ladders have 14” deep

top step standard• Deeper top steps available on all

models• Bead blasted for uniform fi nish• 450 lb. capacity• Built to OSHA and ANSI standards• CAL OSHA available• Spring loaded casters and springs

are not stainless steel• Casters for lock step ladders are

stainless steel

STAINLESS STEEL LADDERS

STAINLESS STEEL LADDERS ARE SUBJECT TO A 50% RESTOCKING CHARGE

Tilt & Roll shown with 20” deep top step

Option: Straddle base with20” deep top step -contact us for pricing

Spring loaded casters

AVAILABLE TREAD TYPESPLEASE SPECIFY WHEN ORDERING

(P) Perforated Step (standard)

(G)Heavy Duty Serrated Grating

Lockstep Ladder with perforated treadBuilt to OSHA and ANSI

Note: All stainless ladders are

manufactured with industrial

grade welds; not recommended for

clean rooms.

*Eligible for UPS*Elli iblbl ff UUPSPS

1219

28.519

28.540506070

1928.519

28.540506070

1219

28.549

58.5738393103

1928.549

58.5738393103

SS1N*SS2N*SS3N*SS220SS320SS420SS520SS624SS724

SS2N30SS3N30SS230SS330SS430SS530SS630SS730

---

SSTR220SSTR320SSTR420SSTR520SSTR624

-

--

SSTR230SSTR330SSTR430SSTR530SSTR630

-

18 x 2020 x 1920 x 2520 x 1920 x 2520 x 3820 x 4424 x 5024 x 56

30 x 1930 x 2530 x 1930 x 2530 x 3830 x 4430 x 5030 x 56

242835404670778195

404443558592105115

HEIGHT INCHESSTEPS INCLUDING TOP STEP

SPRINGLOADED CASTERS

TILT &ROLL

CASTERSTOPSTEP

OVERALL

MODEL #

MODEL#

BASEW” X L”

WGT Lbs

16” WIDE STEPS1 STEP NO RAILS2 STEP NO RAILS3 STEP NO RAILS2 STEP 3 STEP4 STEP5 STEP6 STEP7 STEP24” WIDE STEPS2 STEP NO RAILS3 STEP NO RAILS2 STEP 3 STEP4 STEP5 STEP6 STEP7 STEP

PLEASE SPECIFY WHEN ORDERIN

(P) Perforated Step (standard)

(G)Heavy Duty Serrated Grating

(P) P f t d (G)H D t

BASEW” X L”30 x 4830 x 5430 x 6030 x 6630 x 7230 x 7830 x 8430 x 90

WGTLbs.8292103118133149165180

MODEL #

SSFAWL-5SSFAWL-6SSFAWL-7SSFAWL-8SSFAWL-9SSFAWL-10SSFAWL-11SSFAWL-12

FOLD-N-STORE

STEPS INCLUDING TOP STEP

HEIGHT INCHES LOCKSTEP

MODEL#

SS052414SS062414SS072414SS082414

SS053214SS063214SS073214SS083214SS093214SS103214SS113214SS123214

WGT Lbs.

95105114132

113126147165180199211227

BASE W” x L”

24 x 4624 x 5224 x 5824 x 64

32 x 4632 x 5232 x 5832 x 6432 x 7032 x 7632 x 8232 x 88

OVERALL

8393103113

8393103113123133143153

TOP STEP

50607080

5060708090100110120

16” WIDE STEPS5 STEP 6 STEP 7 STEP8 STEP24” WIDE STEPS5 STEP 6 STEP 7 STEP 8 STEP 9 STEP10 STEP 11 STEP12 STEP

TILT and ROLL casters add 5” to base length

RIBBED TREAD OR SPECIFY ALTERNATE

TREAD WHEN ORDERING

Ribbed Tread(R)

Ribbed Tread

Heavy Duty Serrated Grating (G)

Heavy Duty SSerrated Grating

TILT and ROLL casters add 5” to base length

Fold-N-StoreLadders have 16”

wide steps

hth 24” did t dd hh 36” did bb*M d ld l i

MODEL #

ALWB530ALWB630ALWB730ALWB830ALWB930ALWB1030

WGTLbs. 5060708090100

MODEL #

ALWB5ALWB6ALWB7ALWB8ALWB9

ALWB10

WGT Lbs. 425058667482

BASEW” X L”30 x 4730 x 5330 x 6036 x 6636 x 7236 x 78

OVERALL8393

103113123133

TOP STEP5060708090

100


HEIGHTINCHES 18” WIDE TREAD 24” WIDE TREAD*STEPS

INCLUDING TOP STEP



Turn your fork truck into a personnel lift; Safe, economical access to heights greater than those easily reached by a rolling ladder.• Rugged steel construction• Non-skid platform• 42” high rails with midrails, 4” toeboards and

locking gate• 60” high screen shields operator from fork lift mast• Safety chain secures platform to mast• 2” x 7” fork pockets mounted on 29” centers• 4” swivel casters on base permit easy positioning• Safety orange powder coat fi nish• Ships fl at in a box for easy assembly• Built to ANSI B56.10 standards

1000 lbs capacity

FORK DECK MAINTENANCE PLATFORMModel L” X W” WeightFD-O-CFD-48-CFD-40-48

36” x 36”36” x 48”48” x 40”

135157164

Fluorescent Bulb CaddyTool TrayAll welded available

2614–

OPTIONAL ACCESSORIES

14 15

CANTILEVER SERIESFeatures:• 300 lbs. capacity (higher capacities available - contact factory)• 59 degree slope• Heavy-duty 1” x 2” rectangular tube frame• High quality 5” x 2” locking casters• Available with Rear Guardrail removed

for easy walk through• Powder coat fi nish• Ships KD to prevent freight damage and

lower freight cost

Weight is a combination of the ladder and counter weight, does not include skidding, add 120 lbs for packaging.

NEW! TRUCK/DOCK ACCESS LADDER• Great for accessing trucks or docks• Rugged - base frame and rear vertical are 2” x

1” rectangular tubing• 21” Deep Top Step standard• Heavy duty serrated grating step tread• 10” rear rubber wheels - Great on parking lots or

rough surfaces• Lightweight - lift and roll wheelbarrow portability

• 450 lbs. capacity• Available in both 59° ladder slope or gradual

50° stairway slope• No Rear Guardrail standard for easy walk

through (includes snap chain)• Gray powder coat fi nish• Built to OSHA and ANSI standards

TANK TOP LIFTFEATURES:• Provides easy access to tank trucks, railroad cars or

other cantilevered applications• Great for clearing snow and ice off tops of trailers• Manually propelled for use on hard level surfaces• 48” long cantilevered platform• Hydraulic hand pump raises and lowers platform• Step and deck tread is open serrated grating, while

slip resistant rungs provide access when platform is raised

• Base is 28” wide and 60” long,fi xed outriggers spread 69”

• Full rails on both sides with gates at each end of platform

• Recommended Option: 30” extension railing• Two swivel and two rigid 8” casters for use on hard

surfaces• Two adjustable stabilizing jacks secure lifts to ground• Available with a fi xed platform height• 300 lbs. load capacity• Standard fi nish deep gray enamel paint• Safety orange powder coat also available -

Recommended for outdoor applications

OPTIONAL ACCESSORIES • AC electric power• DC electric power• Air-Hydraulic power• Tool Tray• Fluorescent tube holder• Platform duplex receptacle• Removable 30” extension railing• Safety orange powder coat fi nish

Three available power options:• Convenient plug in 120V

AC with thermal overload protection

• Independent 12V DC deep cycle system complete with battery and charger along with a double solenoid for additional safety

• Air hydraulic power requiring 90 CFM with 90 PSI pressure

Caution: Unless special provisions are made, platforms and lifts must not be used for energized barewire electrical work or operated on inclined surfaces. When this equipment is used, ground personnel should be excluded from theimmediate work area. Compliance withunspecifi ed codes should not be assumed.

15251450

TT-913TT-913F

13’ 8”13’ 8”

9’ 4”9’ 4”

48”48”

24”24”

Adjustable 9’ to 13’Non-Adjustable 9’ to 13’

WeightLbs.

Model Number

Platform Max

Height Min

PlatformLength

PlatformWidth

UnderclearanceHeight

SCISSOR LIFTSFEATURES:• Manually propelled – Rated Capacity 1000 lbs./four person• Totally enclosed platform with 42” guardrails, midrails, 4” toeboards and

swing-in gate• Large 3’x 8’ platform with serrated grating deck to assure secure footing• Built-in ladder provides access to platform in fully lowered position• 8” swivel casters for easy rolling and maneuverability• Self-storing outriggers extend from base to provide maximum stability

(optional on lower height models)• Leveling jacks secure unit to fl oor and compensate for uneven surfaces

(standard on fl oor models with raised deck heights above 15’, optional on lower height models)

• Deep gray enamel fi nish• Meets/exceeds ANSI requirements• Platform controls: for operator safety both hands are required to change

elevation• Emergency stops:

- Located on platform for operator use - Emergency stop also located on base for use by ground personnel - Lockable to prevent unauthorized use

7’4” 10’1” 12’10” 15’8” 18’8” 21’4” 24’4” 27’

2’4” 5’ 3’ 5’8” 3’7” 6’4” 4’1” 6’8”

HW1-7 HW1-10 HW2-13 HW2-16* HW3-19* HW3-22** HW4-24** HW4-27**

17001800200021002300240027002800

13’16’19’21’24’2730’33’

WORKING HEIGHT MAX MIN. STABILIZERS SPECIFY

MODEL #WEIGHT

(lbs.)

PLATFORM HEIGHT

NOTREQ’D

STD.EQUIP.

Shown with options: safety orange paint & 30” extension railing

NOTE: All base dimensions are 9 by 4 ft. *Add 20” to 4-ft base width for extended stabilizers ** Add 40” to 4-ft base width for extended stabilizers



60”70”80”90”

100”110”120”130”140”150”

57”67”77”87”97”

107”117”127”137”147”

24”24”24”24”24”24”24”24”24”24”

CL-6CL-7CL-8CL-9

CL-10CL-11CL-12CL-13CL-14CL-15

468442412405401405409417450458

32 x 4632 x 5232 x 5832 x 6532 x 7132 x 7732 x 8440 x 9040 x 96

40 x 103

735695640583554544537520528536

32 x 5332 x 5232 x 5832 x 6532 x 7132 x 7732 x 8440 x 9040 x 96

40 x 103

763773779697668633601609592600

32 x 6032 x 5932 x 5832 x 6532 x 7132 x 7732 x 8440 x 9040 x 96

40 x 103

791801807811757722690673656664

32 x 6732 x 6632 x 6532 x 6532 x 7132 x 7732 x 8440 x 9040 x 96

40 x 103


VERTICALCLEARANCE




PLATFORM OVERHANG 14” OVERHANG 28” OVERHANG 35” OVERHANG 42” OVERHANG

CANTILEVER LADDERS

MODEL#

TOP STEPHEIGHT

OVERALLHEIGHT

STEPWIDTH

BASEW” x L”

WEIGHTLBS.

TA-5-24TA-5-36

50”50”

80”80”

24”36”

32” x 53”44” x 53”

145170

SW-TA-5-24SW-TA-5-36

50”50”

80”80”

24”36”

32” x 60”44” x 60”

155180

LADDER SLOPE 59°

STAIRWAY LADDER SLOPE 50 DEGREE

ADD PLATFORM OVERHANG LENGTH TO MODEL NUMBER WHEN

ORDERING

OPTIONS/ACCESSORIES:• Cantilevered platform extensions • Special voltage electrical systems

• 120 volt outlet on platform • Safety orange powder coat fi nish

Custom Designs:Available to meet your special access problems - contact factory

for quotation

STANDARD FEATURES:• 120 volt AC power (raise and

lower) with thermal overload protection

OPTIONAL POWER:• 12 volt DC deep cycle system

available with battery and charger

• Air-Hydraulic Drive - recommended for hazardous environments

• CAUTION: - Unless special provisions are

made, platforms and lifts must not be used for energized bare-wire electrical work or operated on inclined surfaces

- When this equipment is used, ground personnel should be excluded from the immediate work area



16 17

Features:• Manually propelled one worker lift with 300 lbs. rated capacity• Totally enclosed platform with 42” guardrails, midrails, and gate;

4” toeboards and skid resistant mat• Two platform styles available:

- Standard platform with steel deck (BL-315) - Cantilevered platform with aluminum deck (BL-C14)

• Built-in ladder with fl at, skid resistant treads and grab rails provides access to platform in fully lowered position while anti-skid rungs provide access to platform when platform is raised

• Compact base frame rolls on two swivel and two rigid 6” casters• Rails fold down for doorway passage and easy storage• Base is 32” wide by 65” long, outriggers extend to 68” wide• Leveling jacks secure lift to the fl oor• Hydraulic hand pump provides easy lifting• Standard fi nish is deep gray enamel paint• Meets/exceeds ANSI safety standards

Manually Propelled

BALLYLIFTS

Cantilevered platform extends 34” beyond base frame

Rolls thru standard doorway

Model BL-315

MR TELESCOPING HYDRAULIC MAINTENANCE LIFTSFeatures:• Rated capacity 500 lbs./two person manually propelled• Select from maximum platform heights of 15’, 19’,

24’ or 28’• Roomy 28” x 36” platform accommodates two workers• Totally enclosed platform with 42” guard rails, midrails

and gate; 4” toeboards and non-slip deck• Built-in ladder with fl at, skid resistant treads and grab rails

provides access to platform in fully lowered position• Rails fold for doorway passage and easy storage• Non-marking 8” casters for easy rolling and

maneuverability• Self-storing outriggers extend from base to provide

maximum stability• Leveling jacks secure unit to fl oor and compensate for

uneven surfaces• Standard deep gray enamel fi nish• Meets/exceeds ANSI safety standards • Three available power options

• Convenient plug in 120V AC • Independent 12V DC deep cycle

system complete with battery and charger

• Air hydraulic power requiring 140 CFM with 90 PSI pressure

Rolls thru standard doorway

ree availabbbllle power option

500 lbs.Capacity

Air-Hydraulic power Tool Tray

Safety Orange Powder Coat FinishFluorescent tube holder

Platform duplex receptacle


TwoWorker Capacity

MR-15-ACMR-15-DCMR-20-ACMR-20-DCMR-24-ACMR-24-DCMR-28-ACMR-28-DC

15’15’

19’ 3”19’ 3”23’ 8”23’ 8”

28’28’

6’ 4”6’ 4”6’ 4”6’ 4”6’ 7”6’ 7”

6’ 10”6’ 10”

21’21’25’25’30’30’34’34’

800930100011301200133014201550

Model Number

Platform Max

HeightMin

WorkingHeight

WeightLbs.

StandardCantilevered


AC electric powerDC electric powerAir-Hydraulic power

Tool TrayFluorescent tube holderPlatform duplex receptacle

Model Number

Platform Max

Platform Min

PlatformLength

PlatformWidth

WeightLbs.

WorkingHeight

BL-315BL-C14

15’14’

6’ 4”6’ 4”

20”64”

28”20”

590900

21’20’


Model OP-11 includes shelf

that raises and lowers

with platform

Features:• Manually propelled one person lift with 300 lbs. capacity• Totally enclosed 26” x 28” platform with 42” guardrails, midrails and gate• Welded compact base 32” x 63” allows lift to pass through doorways• No outriggers required• Rolls effortlessly on two locking swivel and two rigid 6” casters• Both hands are required to operate controls for user safety• 12V DC power source complete with battery and charger for raising and lowering, alternate power

sources available• 80 to 100 raise and lower cycles between charges• 2 models to choose from:

- Ground Entry (OP-10*) - raises to 9’6” and contains two 24” x 24” shelves on base *Shelf that raises and lowers with the platform not available

- One Step Entry (OP-11) - raises to 10’6” and contains two 18” x 24” shelves on base and a 20” x 28” shelf that raises and lowers with the platform

• Standard fi nish is deep gray enamel paint.• Meets/exceeds ANSI safety standards

Model OP-10* Overall height in fully lowered position is 78”

Electrical Note: (on all lift products)Our standard electrical components are NEMA 1 or equivalent and are intended for indoor use in normal

atmospheric conditions. Ships at freight class 125.

Model Number

Platform Max

Platform Min

Working Height

PlatformLength

PlatformWidth

WeightLbs.

OP-10OP-11

9’ 6”10’ 6”

12”23”

15’16’

26”26”

28”28”

710730

POWER STOCKER LIFTFeatures:• Ground Entry - Manually Propelled - Hydraulic Order Picker• Merchandise can be raised to shelf level and easily slid on or off shelf to

minimize lifting • No outriggers required, fl oor locks secure in place. Optional electric

interlocks available• 450 pound total capacity (operator and inventory)• 12 volt DC power (AGM battery) with mounted charger included-Recharge using a standard 110 volt outlet

• High quality controls requires both hands to operate for user safety• 100+ raise and lower cycles between charges• Key lock prevents unauthorized use• Optional sensing system creates a 2’ safety zone around

lift alerting operator of activity below lift• Meets/exceeds ANSI safety standards

MODEL#

WORKINGHEIGHT

MERCHANDISE DECK MAX

HEIGHT

FOOTPRINTW” x L”

OVERALL HEIGHT

(LOWERED)POWER WEIGHT

LBS.

PS-10PS-12PS-15

14’17’21’

9’12’2”15’6”

36” x 54”36” x 54”36” x 54”

76”95”83”

12V DC12V DC12V DC

102210791434

Ideal for the shop or retail fl oor!

Cantilevered Model BL-C14

Shown with

optional safety

orange paint

Optional Safety Sensing System

MAINTENANCE LIFT

18 19


MINI SCISSOR LIFTFeatures:• 500 lb capacity• Provides working heights from 16’ to 19’• Maximun raised platform height of 9’ 10”

to 12’ 9”• MSL - 12 includes outriggers• Platforms are both 24” x 46”• 12 volt DC powered for raising and

lowering• Easy to roll on 6” casters• Meets/exceeds ANSI safety standards

CUSTOM VERTICAL ACCESS

MODEL#

WORKING HEIGHT

PLATFORMMAX.

PLATFORMMIN.

FOOTPRINTW”x L”

OVERALL HEIGHT (Lowered)

WEIGHT(Lbs.)

MSL-10MSL-12

16’19’

9’ 10”12’ 9”

26”26”

28” x 46”28” x 46”

70”74”

787917

CALL BALLYMORE FOR ALLYOUR CUSTOM VERTICAL ACCESS REQUIREMENTS

NO JOB TOO BIG OR TOO SMALL

AIRCRAFT MAINTENANCE PLATFORMS

INDUSTRIAL WORK PLATFORMS

INDUSTRIAL CROSSOVERS

Features:• Supplied in three pieces: two stair sections and one bridge• Structural frame and rails are heavy 11/4” schedule 40 pipe• Standard step and bridge tread: expanded metal or serrated grating

(Optional solid steel tread with abrasive mat on bridge is available to avoid debris falling onto conveyors)

• Full rails, midrails and toeboards• Stairway slope allows forward facing descent• Stair sections have 10” step spacing with 9” of horizontal run per step• Each stair section has four legs with large,

pre-drilled plates to bolt to the fl oor• Also available in alternate confi gurations:

U-Shape, Z-Shape, L-Shape, etc.• Gray powder coat fi nish• Rated capacity 800 lbs.• Maximum use of limited fl oor space while complying to OSHA

requirements

283848586878

CS227CS327CS427CS527CS627CS727

253310378445517600


254325393465537630


276351428505583680

2 STEPS3 STEPS4 STEPS5 STEPS6 STEPS7 STEPS

NO. OF STEPS EACH

SECTIONVERTICAL

CLEARANCE INCHES

MODEL# WEIGHT MODEL# WEIGHT MODEL# WEIGHT

27” OVERALL WIDTH(EXPANDED METAL)

311/2” OVERALL WIDTH(SERRATED GRATING)


*Complete model designation includes suffi x from “Bridge Sections” table. (i.e., CS327-CB227).

Stair Sections (Set of 2) for Industrial Crossovers2 to 7 Steps... with choice of widths

1828384858

-CB227-CB327-CB427-CB527-CB627

88111133156195

-CB231-CB331-CB431-CB531-CB631

95120140165203

-CB238-CB338-CB438-CB538-CB638

102128153180220

2030405060

LENGTHIN

INCHESHORIZONTAL CLEARANCE

INCHESMODEL# WEIGHT MODEL# WEIGHT MODEL# WEIGHT

27” OVERALL WIDTH(EXPANDED METAL)



Bridge Sections for Industrial CrossoversCombine any length with appropriate width stair sections

*Complete model designation includes prefi x, indication a pair of stair sections from “Stair Sections” table.

Alternate confi gurations available by quotation.

SHIPS KD FOR REDUCED

SHIPPING COSTS


Documents

NEW! CANTILEVER SERIES - Ballymore · ANSI standards † CAL OSHA available TREAD TYPES AVAILABLE: (X) Expanded Metal - Standard † (P) Perforated † (R) Abrasive Mat † (G) Heavy