WWW.GENERAL.CA

50-2

20 M

1

50-2

20C

M1

8” DELUXE JOINTER - EXTRA LONG TABLE - 75”Large surface, ground cast-iron tables. Heavy-dutyquick adjust cast-iron fence. Magnetic switch for addedsafety. Powerful 2 HP motor.

MODEL 80-200L M1

$1899.00REG. $2070.00

MODEL 80-200LHC M1

$2490.00REG. $3130.00

MODEL 80-200LHC

36 INSERT (4 rows of 9)8” HELICAL CUTTER HEAD

WE RESERVE THE RIGHT TO CORRECT ANYTYPOGRAPHICAL AND PICTORIAL ERRORS WITHOUT NOTICE.

Distributed by

Prices in effect fromSeptember 1st 2007 to January 31st 2008

FALL - WINTERpromotion

GENERAL “T” FENCE SYSTEMMade in Canada

10” TILTING ARBOR SAW - left tiltAluminum fence system # SF36T30 (MODEL 50-220 M1).GENERAL “T” fence system # F36T28 (MODEL 50-220C M1).GENERAL “T” fence system # F36T52 (MODEL 50-220CL M1for $1195.00 / reg. $1630.00 - not shown ). 44” x 27” Cast-irontable with extension wings. Powerful 2 HP motor.

MODEL 50-220 M1

$999.00REG. $1350.00

MODEL 50-220C M1

$1145.00REG. $1600.00

UNIQUE DIGITAL DISPLAYFOR BLADE ANGLE

17” WOOD CUTTING BANDSAWCast-iron wheels. Solid 23 1/2” x 17” highquality cast-iron table. 2 Blade speeds -1560/3190 FPM. Powerful 2 HP motor.

MODEL 90-240 M1

$1659.00REG. $2100.00

Laser pointer,larger fence &bigger table

1/2” BLADEINCLUDED

NEW

Made in Canada18” WOOD LATHE - VARIABLE SPEEDExtra heavy-duty, cast-iron headstock, tailstock, andbed. 21” Swing over gap capacity. 500 to 3000 RPMvariable speed. 38” Distance between centers.Powerful 1 HP motor.

MODEL 16018-2-M1

$2899.00REG. $3690.50

ITEM 50-EXBC10 - 10”(fits on most 10” saws)

ITEM 50-EXBC14 - 14”(fits on most 12” & 14” saws)

4” main boom and 3” inner boom.Flexible 3” hose connects the bladecover to the boom.

OVERARM BLADE COVERSYSTEM - WITH DUSTCOLLECTION CAPABILITY

ITEM 50-EXBC10

$399.00REG. $530.00

ITEM 50-EXBC14

$499.00REG. $600.00

ITEM 10-824(18” x 24”)

$199.00ITEM 10-929(29” x 29”)

$289.00

PNEUMATIC MOBILE BASEMove heavy objects on acushion of air.

Requires standard compressedair and a smooth floor.

Customizable – can be cut to fitalmost any size exactly. Saferthan wheels - no tipping andzero rollback.

50-0

25

50-0

30

20

-10

02

0-2

00

2

0-2

20

2

650-

T50

350-

T50

HEAVY-DUTY MOBILE BASEFOR TABLE SAWS WITHEXTENSION TABLE & LEGSHeavy-duty steel. Strong 4”wheels. 900 Lbs capacity.

GENERAL “T” FENCE SYSTEMMade in Canada

10” TILTING ARBOR SAW

MODEL 350-T50-M2M - right tiltMODEL 650-T50-M2M - left tilt2 matching V-belts. “T” fence system with 50” rails.Magnetic safety switch. 36” extension table withadjustable steel support legs. Powerful 3 HP motor.

$3319.00REG. $4064.50

$198.00

MODEL 20-220 M13 Rollers. 4 Speeds;19, 30, 50 & 75 FPM.Powerful 1/2 HP motor.

$929.00REG. $1100.00

MODEL 20-200 M13 Rollers. 4 Speeds;20, 26, 33 & 43 FPM.Powerful 1/4 HP motor.

$649.00REG. $750.00

Left tilt

10” JOB SITE TABLE SAW

MODEL 50-090K M1Heavy-duty, precision cast-iron, ribbedtable with miter gauge t-slots. Deluxe,quick adjusting miter gauge. Heavy-dutyfolding stand with wheels for easy mobilityand storage. Powerful 2 HP motor.

$889.00REG. $1100.00

GENERAL “T” FENCE SYSTEMMade in Canada

Larger paddle-stylestop switch

10” DELUXE BUILDER’S TABLE SAW

MODEL 50-175 M1 - right tiltMODEL 50-185 M1 - left tiltDeluxe precision rip fence system # F36T28.Cast-iron miter gauge included. Solid cast-iron table & extension wings (2). Onboardstorage mounts for wrench, rip fence andmiter gauge. Powerful 2 HP motor.

$949.00REG. $1255.00

Table

saws

14” RADIAL ARM SAWMODEL V-154-M2High-quality steel base. Positive stop at 0°, 45° and 90°for tilt & pivot. Rod and blade protectors withanti-kickback fingers. Powerful 3 1/2 HP motor.

$9990.00REG. $10 857.00

Made in Canada

Power feeders

UNIVERSAL MOBILE BASEHeavy-duty steel. Strong 3”wheels. Rubber levelling feet(2). Adjustment in 1” incre-ments. 500 LBS capacity. $69.00

50-0

50

50-1

67S

FLEXIBLE, EXPANDIBLE 2-WAY ROLLER STANDAdjustable height from 24 1/4”to 37”. 9 Nickel-plated 2 1/4” x 20” 2-way rollers. 51 1/2” maximum expandedlength. Load capacity of 300 LBS per set. $299.00

TENONING JIGFOR TABLE SAWPerfect fit on right or left tilttable saws. Heavy-duty cast-iron construction. Large han-dles for better operator control. $129.00

$39.99 each

ZERO-CLEARANCE TABLE SAW INSERTItem #50-020 fits on:-50-090 10” Job site table saw (left tilt)-50-220 10” Arbor saw (left tilt)-50-225 10” Tilting arbor saw (left tilt)Item #50-060 fits on:-350-T50 10” Tilting arbor saw (right tilt)-650-T50 10” Tilting arbor saw (left tilt)Item #50-085 fits on:-50-075 10” Table saw (right tilt)-50-175/185 10” Tilting deluxe builder’s table saw (right/left tilt)-50-250/260 10” Tilting arbor saw (right/left tilt)

7 PCS DELUXE 8” DADOBLADE SETITEM #55-185(2) 24 Tooth exterior blades.Standard 5/8” bore. Maximum 6000RPM. Makes 1⁄8” to 13⁄16” grooves.Anti-kickback design.

$112.95REG. $170.00

Convenient & sturdy woodenstorage case included

MODEL 20-100 M1Fully adjustable - fits on avariety of machines.Variable speeds 6.5 to 40FPM in forward or reverse.Powerful 1/8 HP motor.

$329.00REG. $425.00

Made in Canada

#30

-105

3

MELAMINE EXTENSION TABLE

WITH LEGS INCLUDED

Large cast-ironextension tables

Large cast-ironextension tables

OPTIONAL MOLDING KNIFE KIT - 10 SETS OF 3 KNIVES

$239.00

14” SINGLE SURFACE PLANERCutter head mounted on 2 sealedpermanently lubricated bearings. 15 FPMfeed speed (75 cuts per inch). 2 Matching V-belts. Powerful 3 HP motor.

MODEL 130-1-M2

$5699.00REG. $6253.50

AVAILABLE ON MODEL 30-300HC ONLY20” HELICAL CUTTER HEAD4 rows of 25, total:100 inserts

20” SURFACE PLANER2 Feed speeds -16 & 20 FPM. Built-in mobile base with one-step lock-pedal.

15” SINGLE SURFACE PLANER3 Double edge knives. 2 Feed speeds -16 & 20 FPM. Magnetic safety switch. 3 V-Belt drive. Moveable table. Built-inwheels. Enclosed 3 HP motor.

MODEL 30-125CE M1

$1889.00REG. $2760.00

GENERAL “T” FENCE SYSTEMMade in Canada

GENERAL “T” FENCE SYSTEMMade in Canada

10” TILTING ARBOR SAW

MODEL 50-250K M1, M2, M3 - right tiltMODEL 50-260K M1, M2, M3 - left tilt3 matching V-belts. Hi-precision profes-sional quality rip fence system #F42T50.Magnetic safety switch. Powerful 3 HPmotor.

$1799.00M1 REG. $2390.00M2, M3 REG. $2465.00

14” INDUSTRIAL TILTING ARBOR SAW

Right tilt

Made in CanadaMODEL 550-T50-M57High-quality reinforced steel cabinet. 3 matching V-belts. Heavy-duty, precise ripfence system #F48T50. Magnetic safetyswitch. Powerful 7 1/2 HP motor.

$11 699.00REG. $14 327.50

10” SCORING SAW

MODEL 50-550 M1, M2, M3Separate switch for the scoring motor. Can be turned off when ripping solid wood. Large cast-iron table. Heavy-duty cast-iron trunnions. Magnetic safety switch.Powerful 3 HP single phase motor (M1) & 5 HP for 3 phase motor (M2 & M3).

$4299.00M1 REG. $5200.00M2, M3 REG. $5570.00

GENERAL “T” FENCE SYSTEMMade in Canada

Separate 1/2 HPscoring motor

15” SINGLE SURFACE PLANER3 Cutter knives. 2 Feed speeds -16 &20 FPM. Magnetic safety switch.Stationary table. Powerful 3 HP motor.

MODEL 30-115 M1

$1359.00REG. $1700.00

Planers

Large cast-ironextension tables

MODEL 30-300 M13 HP motor

$2695.00REG. $3450.00

MODEL 30-300HC M15 HP motor

$3990.00REG. $4750.00

13” PLANER / MOLDERFully enclosed stand protects motor. Built-in wheels. Cast-iron table, base and head.Safety key switch. Feed speeds - 24 FPMfor Planer & 12 FPM for molder.Powerful 1 1/2 HP motor for planer.

MODEL 30-100 M1

$1499.00REG. $1750.00

Made in Canada

20” SINGLE SURFACE PLANERCast-iron table & head. 4 Cutter knives. 2 Feed speeds - 22 & 28 FPM. Magneticsafety switch. Powerful 7 1/2 HP motor.

AVAILABLE ON MODEL 30-360HC ONLY20” HELICAL CUTTER HEAD4 rows, total:100 inserts

MODEL 30-360 M1,M2,M3

$3990.00M1 REG. $5750.00M2, M3 REG. $5715.00

MODEL 30-360HC M1,M2,M3

$6250.00M1 REG. $8930.00M2, M3 REG. $8895.00

4

6” X 48” BELT &12” DISC SANDERHeavy-duty enclosed cabinet baseprotects motor from sanding dust.2245 LIN.FPM belt speed. Built-in dustcollector. Powerful 1 1/2 HP motor.

MODEL 15-035DC M1

$1079.00REG. $1380.00

6” X 108” VERTICALEDGE BELT SANDERFront table tilts left or right. Graphitebacking reduces belt friction for longer beltlife. Single knob tracking control. Newoscillating feature (15-010S M1 only).Powerful 2 HP motor.

MODEL 15-010 M1

$1599.00REG. $2170.00

MODEL 15-010S M1

$1869.00REG. $2490.00

SLIDING TABLEEasy to install sliding table system for table saws andshapers, ensures quick and precise cuts with largepanels. Fits most 10" to 14" table saws and mostshapers.

ITEM 50-EB3

$119.00REG. $150.00

6” X 89” EDGE BELT SANDERSanding belt operates at any angle from horizontal to vertical. Graphite coveredsteel plate for reduced friction andextended belt life. New oscillatingfeature (15-005S M1 only). Powerful1 1/2 HP motor.

6” X 48” EDGE BELT &12” DISC SANDERSanding head can be operated invertical or horizontal positions. Graphitecoated steel plate reduces friction.Precision metal miter gauge included.2 Large surface cast-iron tilting tables.Powerful 1 HP motor.

MODEL 15-015 M1

$799.00REG. $1240.00

Sand

ers

MODEL 15-005 M1

$899.00REG. $1219.00

MODEL 15-005S M1

$989.00REG. $1319.00

Heavy steel base forbetter stability

Improved belttracking system

ITEM #15-710OPTIONAL STAND

FOR BENCH GRINDERS

$79.00

BELT SANDER/GRINDERDouble sealed ball-bearingconstruction. Adjustablealuminum tool-rest.3450 RPM grinding speed.4900 FPM belt speed.Powerful 1/3 HP motor.

MODEL 15-232 M1

$169.00REG. $225.00

8” LOW RPM BENCH GRINDERDouble sealed ball-bearing construction.New motor housing design for wider work area.Gooseneck work light. Low1725 RPM. Powerful1/2 HP motor.

MODEL 15-825 M1

$149.00REG. $190.00

6” VARIABLE SPEED BENCH GRINDERDouble sealed ball-bearing construction.Adjustable aluminum tool-rests. Heavy-duty wheelguards with dust chute. Variable speed.

MODEL 15-660 M1

$129.00REG. $170.00

ITEM 50-SLT-40

$625.00REG. $950.00

ITEM 50-SLT-60

$825.00REG. $1060.00

21” SCROLL SAWUnique tilting head design tilts the blade,not the table keeping the workpiece levelfor better control & more accurate cuts.21" Throat capacity. 2" Thickness capacity.Variable speed of 400 to 1550 STROKES/MIN.

MODEL EX-21

$779.00REG. $949.00

“OSBORNE” MITER GAUGESolid triangular design for tight miter joints.Sliding flip-up stop. Easy to read index graduations. Patented extension armassembly makes it quick & easy to find anyangle and lock it securely in place.

Unique tilting

head design

Tilts 45° left

& right

5

40-1

5040

-005

MODEL 40-450 M1, M2, M3

$4490.00M1 REG. $5620.00M2, M3 REG. $5830.00

1 1/4” HEAVY-DUTYPRODUCTION SHAPERSolid heavily ribbed cast-iron table.5 Forward spindle speeds plus reverse. 2 emergency stops.Magnetic switch with thermaloverload protection. 5 HP motor(M1) & 7 1/2 HP motor (M2, M3).

MODEL 40-250 M1

$1499.00REG. $2115.00

MODEL 40-300 M1

$3495.00REG. $4500.00

1 1/4” SPINDLE VARIABLESPEED SHAPERLarge cast-iron table. Electronicinverter variable speed control(3000-10,000 RPM). Digital speeddisplay. Forward & reverse rota-tion. Magnetic starter with thermaloverload protection. Powerful 3 HP motor.

3/4” SPINDLE WOOD SHAPER1/4” & 1/2” Router bit adaptersincluded. Two spindle speeds (8000& 10,000 RPM) with reverse.Magnetic starter with thermaloverload protection. Powerful3 HP motor.

Shapers

MODEL 80-250 M1

$2950.00REG. $4000.00

2 in 1jointer &mortiser

MODEL 480-1-M2

$3799.00REG. $4895.00

Extra long74” tables

MODEL 80-100L M1

$799.00REG. $990.00

MODEL 80-150L M1

$799.00REG. $990.00

6” DELUXE JOINTERLarge surface, ground cast-irontables. Cast-iron fence with 90° and45° positive stops. Quick lever tableadjustment. Jackscrew system foreasy knife adjustment. Powerful 1 HP motor.

Extra long55 1/4”tables

24” HORIZONTAL DOUBLEDRUM SANDERTwo 5” diameter aluminum drums. Highquality conveyor belt for long servicelife. Magnetic safety switch. 3 to 20 FPM variable feeding speed(conveyor belt). Powerful 3 HP main motor.

MODEL 15-250 M1

$1999.00REG. $2800.00

24” HORIZONTAL SINGLEDRUM SANDERSteel frame and heavy-duty base. Highquality variable speed conveyor belt.3-20 FPM variable feed speed.Magnetic safety switch. Powerful2 HP main motor.

MODEL 15-150 M1

$1559.00REG. $2200.00

Variable speedconveyor belt

Variable speedconveyor belt

OSCILLATING SPINDLE SANDERPrecision ground cast-iron tilting table.5 interchangeable spindles included(1/4", 1/2", 5/8", 1 1/2", 2" dia.).1720 RPM spindle speed. Powerful1/2 HP motor.

MODEL 15-220 M1

$439.00REG. $495.00

OSCILLATING SPINDLE SANDERHeavy-duty oil bath gearbox.75 Oscillations per minute. 1725 RPMspindle speed. 10 interchangeablespindles included (1⁄4”, 3⁄8”, 1⁄2”, 5⁄8”,3⁄4”, 1”, 1 1⁄2”, 2”, 3”& 4”). Powerful1 HP motor.

MODEL 15-020 M1

$1199.00REG. $1749.00

Tilting head

Heavy-duty base withbuilt-in storage area

6” DELUXE JOINTERLarge surface, ground cast-irontables. Cast-iron fence with 90° and45° positive stops. Independent in-feed and out-feed table adjustmenthandwheels. Jackscrew system foreasy knife adjustments. Powerful 1 HP motor.

Extra long55 1/4”tables

Made inCanada

10” DELUXE JOINTERWITH MORTISERHandwheel adjustable in-feed andout-feed tables mounted on dove-tailed way. Two way tilting fencewith positive stops at 45° and 90°.Magnetic safety switch. Powerful 3 HP motor.

8” DELUXE JOINTERHeavy-duty cast-iron table.38” Heavy-duty fence system.Cutter head mounted on two sealedpermanently lubricated bearings.Magnetic safety switch. Powerful1 1/2 HP motor.

Jointers

UNIVERSAL CUTTERHEADFOR 3/4” & 1 1/4” SHAPER

$229.00

DELUXECAST- IRONROUTER TABLECast-iron table.Miter gauge &feather boardincluded.

$789.00

Bench-top model

6

25-2

10

25-2

50

25-0

36

25-1

05 /

25-

605

70-1

10

75-0

50 M

1

75-0

50T

M1

*

*

$89.00 each

“MAXI-LATHE” WOOD LATHE

MODEL 25-100 M1Quick lock control levers easilyposition tool-rest. Large 10” inboardbowl turning capacity. 6 Speeds:480, 1270, 1960, 2730, 3327 &4023 RPM. Powerful 1/2 HP motor.

$399.00REG. $495.00

Top opening measures9 1/4” x 12 3/4”

$89.00

4” - 4 JAW SCROLL CHUCK25-105: (1” - 8)For 25-100, 25-200, 160 & 16018

25-605: (1 1/4” - 8)For 25-600, 25-650, 260 & 26020

MODEL 26020-1-M2Extra heavy-duty, cast-iron headstock,tailstock, and bed 24 1/2” Swing overgap capacity. 375 to 3300 RPMvariable speed. 38” Distance betweencenters. Magnetic safety switch.Powerful 2 HP motor.

$5329.00REG. $6649.50

Variable reversible speed

20” WOOD LATHE

MODEL 25-650 M1Heavy-duty cast-iron bed forminimal vibration. Headstockswivels 360º. Electronic inverterfor variable speed adjustment(0- 3750 RPM). Powerful1 1/2 HP motor.

$1999.00REG. $2675.00

Electronic variable speed &pivoting head

16” X 42” WOOD LATHEW

ood

lath

es

ITEM #75-045

OPTIONAL OPEN STANDUNIVERSAL BASE

ITEM #75-070

OPTIONAL CLOSED STAND

INCLUDED

Accessories included: live center,spur center, knockout bar & safetyglasses

ITEM #25-195OPTIONAL STAND

$159.00 Made in Canada

MODEL 26020VDR-M2Same features as model 26020-1-M2.Quick release speed changing lever.4 Variable speeds (0 to 3000 RPM).

$5659.00REG. $6765.00

4 Variable / reversible speedswith electronic control

20” WOOD LATHE

Made in Canada

4 PC WOOD TURNINGCHISEL SET25-210 - CONTAINS:ITEM# 25-215 3/4” DIAMOND

PARTING TOOLITEM# 25-220 1/2” ROUND NOSE

SCRAPERITEM# 25-225 1” SKEW CHISELITEM# 25-230 1/2” BOWL GOUGEITEM# 25-235 WOODEN CASE

High speed steelThe ultimate wood chisel set

5 PC WOOD TURNINGMINI-CHISEL SET25-250 - CONTAINS:ITEM# 25-255 1/8” GOUGEITEM# 25-260 1/4” GOUGEITEM# 25-265 3/32” PARTING TOOLITEM# 25-270 1/4” ROUND NOSE

SCRAPERITEM# 25-275 1/4” SKEW CHISELITEM# 25-280 WOODEN CASE

High speed steel

$79.00$159.00

WOOD LATHE DUPLICATORCreates perfectly matchedspindles with ease. Extrudedaluminum base and carriage.Smooth hand wheel controlledrack & pinion system. High speedsteel cutter.

$459.00

Fits most 12” - 22” floor modellathes with cast bedways

5/8” HOLLOW CHISEL MORTISERSTilting head with a 180° swivel (#75-050T only). Heavy-duty cast-iron construction. 1/4”, 5/16”, 3/8”, & 1/2” chisel& bit sets included. Powerful 1/2 HP motor.

MODEL 75-050 M1

$425.00REG. $530.00

MODEL 75-050T M1

$469.00REG. $579.00

1” HOLLOW CHISEL MORTISERHeavy-duty cast-iron construction. 1/4”, 3/8”,1/2”, & 3/4” chisel & bit sets included. Lateraland Longitudinal table movement. Tilting head andswivel fence. Powerful 1 HP motor.

MODEL 75-075 M1

$1249.00REG. $1590.00

INCLUDED

PORTABLE POCKETHOLE JIGSimple and easy to use – make pocket holes likethe pros!

$69.00$239.00

Mortiser sold separately

590-

1-M

170

-900

70-0

16

7

15” DRILL PRESSWITH REG. 1/2” CHUCK WITHKEY & THREADED COLLAR

4 1/2” Spindle travel.6 Speeds (460 to 4910RPM). Head raises and lowers on thecolumn. Powerful 3/4HP motor.

MODEL34-01-M1

$1990.00REG. $2552.00

Drill presses

$23.79

$39.00

16 PIECEFORSTNER BIT SETOVERALL LENGTH: 3 1/2”INCLUDED: 1/4” - 2 1/8” in1/8”increments 1/4” - 1’round shank (shank dia:3/8”) 1 1/8” - 2 1/8” hexshank

$64.95

Bandsaws

$199.00

24” DOVETAIL FIXTUREITEM #40-020Male and female dovetail joints are cutsimultaneously. Side stops provided. 1/2” Half-blind template included (Item #40-022).

$369.00

1/2” bladeincluded

3/8” bladeincluded

18” WOOD CUTTINGBANDSAWCast-iron wheels. 11 1/2” cutting capacity. Footbrake for quick machineshut-off. Magnetic safetyswitch. Powerful industrial3 HP motor.

MODEL 90-270 M1

$2279.00REG. $2920.00

14” WOOD CUTTINGBANDSAWBuilt-in dust collection system. Laser pointer &work light included.Precision aluminum mitergauge. 8” Super cuttingcapacity. 2 Blade speeds- 2103 & 2915 FPM.Powerful 1 HP motor.

MODEL 90-150 M1

$839.00REG. $1370.00

MORTISINGATTACHMENT KIT

$84.50

14” WOOD CUTTINGBANDSAWRip fence & miter gaugeincluded. 2 Speeds (1930& 3425 LIN.FPM). Blowerdevice. Powerful1 HP motor.

MODEL 90-125 M1

$749.00REG. $930.00

3/8” bladeincluded

ITEM #90-130

OPTIONAL RISERATTACHMENT KIT

$74.00

15” WOOD CUTTINGBANDSAWOne-piece molded cast-iron frame. Dynamicallybalanced heavy cast-ironwheels. Graduatedindicator for bladetension. Powerful 1 HPmotor.

MODEL 490-1-M1

$3499.00REG. $3938.00

AVAILABLE:15” METAL CUTTINGBANDSAWSame features asmodel 490-1-M1. 8 Blade speeds (40 to 3250 Lin. FPM).Heavy-duty cast-irongearbox.

$4799.00Made in Canada

15” WOOD CUTTINGBANDSAWCast-iron frame.Dynamical balancedheavy cast-iron wheels.Very silent, vibration freeoperation. Graduatedindicator for bladetension. Powerful1 1/2 HP industrial motor.

MODEL 690-1-M2

$3799.00REG. $4186.60

Made in Canada

EDGE BANDERITEM #45-100Electronically controlled heat element variable heatfrom 100 to 200° C. Accommodates a wide range ofedge banding material up to 2” thick. Built-in cut-offknife with palm-strike knob. 26 3/4” x 7 1/2” Laminatecovered table supports large workpieces.

14” DRILL PRESSWITH REG. 5/8” CHUCKRotating, 45° tilting,crank-operated work-table with quickrelease clamp.Safety switch &adjustable spindletension returnspring.1/2 HPindustrial motor.

MODEL 75-150 M1

$329.00REG. $350.00

17” DRILL PRESSWITH REG. 5/8” CHUCKRotating, 45° tilting,crank-operatedworktable with quickrelease clamp.12 Spindle speeds(340 to 2800 RPM).Powerful 3/4 HPmotor.

MODEL 75-200RC M1

$539.00REG. $730.00

Made inCanada

TOP SAVERITEM #GC-010Reduces friction and prevents binding. Removes andinhibits rust and corrosion. Repels dust and moisture.

All in oneTable top rustremover &lubricant.

ELECTRONIC EARMUFFSITEM #99-200LED power indicator. ON / OFF switch with volumecontrol. Attenuates noise over 85 dB. Built-inmicrophone amplifies low-level sounds.

8

ITEM #10-306 ITEM #10-309 ITEM #10-310

ITEM #10-314 ITEM #10-323ITEM #10300-35B

ITEM #10300-11BITEM #10-332 ITEM #10-334

10-1

05C

F

10-1

05

10-2

10C

F

10-2

10

10-1

0010

-200

10-4

10

10-3

15 M

1

10-3

00 M

1

95-7

0095

-900

* * *

* *

* *

TWO-MACHINE HOOK-UP KIT• (10) 4” Wire bail hose clamps• (1) 4” Universal dust hood

outlet• (2) 4” X 10’ Polyethylene

flexible hose• (6) Heavy-duty clear plastic

collector bags• (1) Table saw dust hood• (2) 4” Blast gates• (1) 4” Y fitting

$99.90

Dus

t col

lecto

rs

MODEL 10-315 M1

$469.00REG. $549.00

DUST COLLECTOR620 CFM (air flow). One 4” inlet. Powerful 1 HP motor.

MODEL 10-005 M1

$319.00REG. $419.00

INCLUDED ACCESSORIES

ITEM #10-318

OPTIONAL 18’FLEXIBLE HOSE

DUST COLLECTOR1100 CFM (air flow).Powerful 1 1/2 HP motor.

MODEL 10-105 M12 Micron bag filter

$399.00REG. $575.00

MODEL 10-105CF M11 Micron canister filter

$599.00REG. $825.00

PORTABLEDUST COLLECTOR700 CFM (air flow). Support arm extendsup to 12”. Wide dusthood. Powerful 1 HPmotor.

MODEL 10-050 M1

$269.00REG. $299.00

DUST COLLECTOR2200 CFM (air flow).Powerful 3 HP motor.

MODEL 10-210 M12 Micron bag filters

$999.00REG. $1275.00

MODEL 10-210CF M11 Micron canister filters

$1329.00REG. $1800.00

MODEL 10-300 M1

$299.00REG. $359.00

WET/DRY VACUUM CLEANERSStainless steel tank. 10 Gallon capacity formodel 10-300 & 15 gallon capacity formodel 10-315. 2 Speed 1 1/2 HP motor(10-300 only). 2 High efficiency 1 1/2 HPmotors (10-315 only). 2 Stage air filtration.

$49.00

SINGLE MACHINEHOOK-UP KIT• (2) 4” Wire bail hose clamps• (1) 4” Universal dust hood

outlet• (1) 4” X 10’ Polyethylene

flexible hose• (3) Heavy-duty clear plastic

collector bags

4” x 10’ POLYETHYLENE FLEXIBLEHOSE FOR DUST COLLECTOR

$33.00

7” CABINET-MAKERS VISE

$99.00

$129.90

9” CABINET-MAKERS VISE

“SUPER TURBO”AIR CLEANING SYSTEMAir movement (3 speeds) 700, 900,1250 CFM. Timer settings 2, 4, 6, 8 hrs &continuous. Powerful 1/3 HP motor.

MODEL 10-600 M1

$499.00REG. $545.00

DRY FILTER SPRAY BOOTHHighly efficient filtration system designed toremove 99.5% of industrial overspray for acleaner, safer work environment. 3300 CFM (airflow). Powerful 3 HP motor.

MODEL 10-900 M1

$2649.00REG. $3500.00

3 in 1sanding,painting& aircleaning

PORTABLE DOWN DRAFT TABLE22” x 18 1/2” (#10-710) or 35 1/2” x 18 1/2”(#10-715) table sizes. 4” Dust port. Internal bafflesfor stable maximum capacity airflow. Included 6adjustable stops. Sturdy steel frame.

ITEM #10-710

$169.00REG. $195.00

ITEM #10-715

$199.00REG. $245.00

$36.00 $12.00 $11.00

$20.00 $34.90

$28.50 $17.25$69.90

*ALSO SOLDSEPARATELY