Upload
phungkiet
View
214
Download
0
Embed Size (px)
Citation preview
1
Sixth International Conference on Durability of Concrete Structures (ICDCS2018) Wednesday 18 – Friday 20 July 2018
Neville Symposium on Advances in Concrete Technology Wednesday 18 July 2018
Adam Neville National PhD Workshop in conjunction with the Concrete Society Thursday 19 July 2018
Programme (subject to change)
Wednesday 18 July 2018
08:30 – 09:15
Registration and coffee (Mechanical Engineering foyer)
09:15 – 09:20
Welcome (Mechanical Engineering Lecture Theatre A) Professor Hai-Sui Yu, Pro-Vice-Chancellor: International and Professor of Geotechnical Engineering
ICDCS 2018 Mechanical Engineering Lecture Theatre A
09:20 – 10:05
Chair
s:
P.A
.M. B
asheer,
W-L
. Jin
PL01 (Plenary) The performance of concrete in a marine environment M.D.A. Thomas and E.G. Moffatt, University of New Brunswick, Canada
10:05 – 10:50
PL02 (Plenary) Alkali-activated cements and concretes – durability testing to underpin standardisation J.L. Provis, University of Sheffield, UK
10:50 – 11:05
Conference photograph (Mechanical Engineering foyer)
11:05 – 11:20
Coffee break (Mechanical Engineering foyer)
2
18th July Neville Symposium Session 1 Civil Engineering Lecture Theatre A
ICDCS 2018 Session 1 Mechanical Engineering Lecture Theatre A
ICDCS 2018 Session 2 Electrical Engineering Agilent Lecture Theatre
ICDCS 2018 Session 3 Chemical and Process Engineering Lecture Theatre C
Influence of Constituents of Concrete (ICC): Alternative cementitious materials
Performance in Service Environments (PSE): Performance in chloride environment
Testing, Inspection and Monitoring Methods (TIM): Durability tests
11:20 – 11:45
Chair
: J
. F
ort
h
Nano-engineered meta cement-based materials and durability Surendra P Shah, Northwestern University, USA
11:20 – 11:40
Chair
s: M
. C
riado a
nd B
. M
obasher
ICC01 Effects of temperature and curing duration on the stability of slag cements in combined chloride-sulphate environments J.O. Ukpata, P.A.M. Basheer and L. Black, University of Leeds, UK
Chair
s: A
. M
ukho
padh
yay a
nd Y
. Z
hao
PSE01 Climate resilient concrete structures in marine environment of Bangladesh S. Srinivasan and I. Gibb, Mott MacDonald Limited, UK
Chair
: Y
. B
alli
m
TIM01 Using long-term outdoor exposure data to benchmark accelerated durability test methods R.D. Hooton, University of Toronto, Canada
11:45 – 12:10
Concrete specification, construction and problem avoidance Peter Robery, University of Birmingham, UK
11:40 – 12:00
ICC02 Carbonation in alternative cementitious materials: implications on durability and mechanical properties P. Alapati and K.E. Kurtis Georgia Institute of Technology, USA
PSE02 Effect of chloride exposure condition on the performance of concretes containing PFA
P.C. Ryan, University College Cork, Ireland; A. J. O'Connor, Trinity College Dublin, Ireland
TIM02 Diagnosis on expansion of heat-cured precast concrete blocks due to delayed ettringite formation in Japan Y. Kawabata, Port and Airport Research Institute, Japan
12:10 – 12:35
Calcium aluminates – the good and the bad Conrad Plowman, formerly UK Analytical Ltd, UK
12:00 – 12:20
ICC03 Compressive strength, free expansion and shrinkage of expansive concrete containing fly ash W. Saengsoy, R. Chatchawan and S. Tangtermsirikul, Thammasat University, Thailand
PSE03 Influence of exposure environments on the durability of slag blended cements J.O. Ukpata, P.A.M. Basheer and L. Black, University of Leeds, UK
TIM03 Design of an in situ steady-state permeability test to determine the air permeability of covercrete K. Yang and P.A.M. Basheer, University of Leeds, UK; A.E. Long and S. Nanukuttan Queen’s University Belfast, UK; C. Yang, Chongqing University, China; Y. Wang, Shenzhen University, China; S. Mu, Jiangsu Sobute New Materials Co. Ltd, China
12:35 – 13:00
Can we control durability of alkali-activated slag concretes? Susan Bernal, University of Sheffield, UK
12:20 – 12:40
ICC04 Design of ternary blend high-volume fly ash concrete mixes using hydrated lime C. Gunasekara, D.W. Law and S. Setunge, RMIT University, Australia
PSE04 Environmental factors influencing the durability of concrete structures in maine environments
H.R. Wu, F.J. Zhang, Y. Wang and X.W. Ma, Henan University of Urban Construction, China; L.B. Jin, Henan University of Technology, P.R. China
TIM04 Self-sensing and self-healing ‘smart’ cement-based materials – a review of the state of the art D.K. Mishra, KMBB College of Engineering and Technology, India; J. Yu and C.K.Y. Leung, Hong Kong University of Science and Technology, China
3
ICDCS Session 1 continued (ICC) ICDCS Session 2 continued (PSE) ICDCS Session 3 continued (TIM)
12:40 – 13:00
Chair
s:
M. C
riad
o a
nd
B. M
obashe
r
ICC27 Pore structure and thermal analysis of hardened cement paste incorporating graphene oxide during carbonation W-J. Long, Y-C. Gu, T-H. Ye, N-X. Han, Shenzhen University, P.R. China (presented by M. Su) C
ha
irs: A
. M
ukho
pa
dh
ya
y
and Y
. Z
ha
o
PSE26 Experimental and numerical study of macro-cell corrosion between crossed steel bars Z. Dong, X.L. Gu, Z.H. Jin, Tongji University, China
Chair
: Y
. B
alli
m
TIM05 Development of engineered cementitious composites with conductive inclusions for use in self-sensing applications B. Suryanto, D. Saraireh, S. Walls, J. Kim and W.J. McCarter, Heriot-Watt University, UK
13:00 – 14:00
Lunch, posters and exhibition (Mechanical Engineering 5th floor)
Neville Symposium Session 2 Civil Engineering Lecture Theatre A
ICDCS 2018 Session 4 Mechanical Engineering Lecture Theatre A
ICDCS 2018 Session 5 Electrical Engineering Agilent Lecture Theatre
ICDCS 2018 Session 6 Chemical and Process Engineering Lecture Theatre C
Influence of Constituents of Concrete (ICC): Activated cementitious systems
Performance in Service Environments (PSE): Carbonation and corrosion
Testing, Inspection and Monitoring Methods (TIM): Characterisation of pore structure
14:00 – 14:25
Chair
: J
. F
ort
h
Challenges with meeting performance specifications that use current durability test methods Doug Hooton, University of Toronto, Canada
14:00 – 14:20
Chair
: J. P
rovis
ICC06 Impact of water content on the performance of alkali-activated slag concretes S.A. Bernal and J.L. Provis, University of Sheffield, UK; J.S.J. van Deventer, University of Melbourne, Australia, and Zeobond Pty Ltd, Australia
Chair
s: M
. G
ranth
am
and
X.
Zhou
PSE05 Influence of cracks on the carbonation resistance of concrete structures A. Al-Ameeri, University of Brighton, UK, and University of Babylon, Iraq; M.I. Rafiq and O.Tsioulou, University of Brighton, UK
Chair
s: D
. B
jegovic
and Y
. B
ai
TIM06 Influence of pore structure on relative chloride diffusion coefficient in unsaturated cementitious materials Y. Zhang and G. Ye, Delft University of Technology, The Netherlands
14:25 – 14:50
Experience with the implementation of concrete durability design on international projects Maureen Johnson and Carola Edvardson, COWI UK Ltd, UK
14:20 – 14:40
ICC07 Influence of sulfide on the onset of chloride-induced corrosion of steel reinforcement in alkali-activated slags M. Criado, S. Mundra, S.A. Bernal and J.L. Provis, University of Sheffield, UK
PSE06 Experimental and numerical investigation on the irregularity of carbonation depth of concrete under supercritical condition H. Bao, M. Yu, J. Ye, L. Xu and Y. Chi, Wuhan University, China; J. Ye, Lancaster University, UK
TIM07 Investigation of microstructure of cementitious material exposed to high temperature by non-destructive integrated CT-XRD method T. Mikami, H. Takahashi and T. Sugiyama, Hokkaido University, Japan
14:50 – 15:15
Concrete under nanoscope: the review of nano-engineered concrete Konstantin Sobolev, University of Wisconsin, USA
14:40 – 15:00
ICC08 Strength and durability of hybrid fibre reinforced binary blend geopolymer concrete N. Ganesan, P.V. Indira and R. Sahana, National Institute of Technology, India
PSE07 Interactions between reinforcement corrosion and chloride ion diffusion in mortar C. Chen, Y. Chuang, C. Wu and C. Hsu, National Taiwan University of Science and Technology, Taiwan
TIM08 Pore characteristics and computed permeability of pastes subject to freeze-thaw cycles at very early ages by X-ray CT Y. Wei, Z. Wu and X. Gao, Tsinghua University, China
4
18th July Neville Symposium Session 2 continued ICDCS Session 4 continued (ICC) ICDCS Session 5 continued (PSE) ICDCS Session 6 continued (TIM)
15:15 – 15:40
Chair
: J
. F
ort
h
Foamed concrete: from lab to site Rod Jones, University of Dundee, UK
15:00 – 15:20
Chair
: J. P
rovis
ICC10 A preliminary investigation into geopolymer cement mortar’s suitability for providing resilient highway solutions B.J. Magee, A. Wilkinson, D. Woodward, S. Tretsiakova-McNally and P. Lemoine, Ulster University, UK
Chair
s: M
. G
ranth
am
and
X.
Zhou
PSE08 Sustainable concrete with seawater and corrosion resistant reinforcement: results of monitoring of corrosion behaviour E. Redaelli, M. Carsana, F. Lollini, M. Gastaldi and F.T. Isfahani, Politecnico di Milano, Italy
Chair
s: D
. B
jegovic
and Y
. B
ai
TIM09 Meso-scale study of water transport in mortar influenced by sodium chloride and freeze-thaw cycles Y. Wang and J. Deng, Guangdong University of Technology, China; T. Ueda and Z. Wang, Hokkaido University, Japan; D. Zhang, Zhejiang University, China
15:40 – 16:05
Intrinsic variations in the properties of sprayed concrete Atef Badr, Military Technological College, Muscat, Oman
15:20 – 15:40
ICC11 Enhancement of durability characteristics of geopolymer concrete with manufactured sand M.I. Abdul Aleem, PSG Institute of Technology and Applied Research, India; T. S. Priya, VIT University, India
PSE09 Effect of corrosion and corrosion rate on the mechanical performance of carbon and stainless steel reinforcing bars H.L. Wang, X.Y. Sun and H.T. Kong, Zhejiang University, China
TIM10 An investigation on moisture and water absorption in cement paste with electrical resistance method M. Mizoguchi, T. Kitagawa, T. Daungwilailuk, Y. Ogawa and K. Kawai, Hiroshima University, Japan
15:40 – 16:00
PSE10 Investigation on the influence of concrete pores on steel corrosion process X. Zhang and Y. Zhao, Zhejiang University, China
TIM11 Will blended-cement systems with similar chloride penetration potentials resist similarly to corrosion? W. Wilson, V. Labattaglia and A. Tagnit-Hamou, Université de Sherbrooke, Canada; L. Sorelli, Université Laval, Canada
16:00 – 16:30
Tea, posters and exhibition (Mechanical Engineering 5th floor)
5
18th July Neville Symposium Session 3 Civil Engineering Lecture Theatre A
ICDCS 2018 Session 7 Mechanical Engineering Lecture Theatre A
ICDCS 2018 Session 8 Electrical Engineering Agilent Lecture Theatre
ICDCS 2018 Session 9 Chemical and Process Engineering Lecture Theatre C
Influence of Constituents of Concrete (ICC): Influence of nano materials
Performance in Service Environments (PSE): Chemical deterioration
Testing, Inspection and Monitoring Methods (TIM): Electrical and electrochemical properties
16:30 – 16:55
Chair
: J
. F
ort
h
Service life assessment through site NDT Roberto Torrent, Materials Advanced Services Ltd, Argentina
16:30 – 16:50
Chair
s: K
. B
onin
an
d M
. S
anth
ana
m
ICC12 The synergistic effect of nano-silica with slag on frost resistance of concrete L. Yuan, Z. Zhou, P. Du, X. Cheng, P. Hou, L. Zhang and Q. Li, University of Jinan and Shandong Provincial Key Laboratory of Preparation and Measurement of Building Material, China
Chair
s: S
. S
riniv
asan a
nd H
. W
ang
PSE11 Freeze-thaw resistance of concrete: insight from microstructural properties S. Adu-Amankwah and L. Black, University of Leeds, UK; M. Zajac, J. Skocek and M. Ben Haha, Heidelberg Technology Center GmbH, Germany
Chair
s: H
. W
ong a
nd E
. Y
ogara
jah
TIM12 An experimental study of concrete resistivity and the effects of electrode configuration and current frequency on measurement H. Oleiwi1,3, Y.Wang1, N. Xiang1,4, L. Augusthus-Nelson1, X. Chen2 and I. Shabalin1 1University of Salford, UK; 2Charter Coating Service (2000) Ltd, Canada; 3University of Thi-Qar, Iraq; 4Chongqing Jiaotong University, China
16:55 – 17:20
The potential of microwave curing for manufacturing low-carbon concrete Yun Bai, University College London, UK
16:50 – 17:10
ICC13 Effect of nanosilica on the sulfate attack resistivity of cement mortar P.K. Hou, Z.H. Guo, Q. Yu, N. Xie, X. Cheng and S.P. Shah, University of Jinan, China
PSE12 Sulfate resistance study of carbonated low-calcium silicate systems R. Tokpatayeva and J. Olek, Purdue University, USA;
J. Jain, A. Seth and N. DeCristofaro, Solidia Technologies Inc., USA
TIM13 Micro-mechanical analysis of corrosion products formed during long-term carbonation induced corrosion of steel M. Serdar and D. Bjegović, University of Zagreb, Croatia; V. L’Hostis and S. Poyet, Université Paris-Saclay, Croatia; D. Féron,Université Paris-Saclay, France
17:20 – 17:45
Energy, carbon dioxide and cements – materials for the future Mark Tyrer, Coventry University, UK
17:10 – 17:30
ICC15 Long term permeability and acid resistance of self-compacting concretes with micro and nano mineral additions G. Barluenga, C. Guardia, University of Alcalá, Spain; J. Puentes, CSIC, Spain; N. Flores, European University of Canarias, Spain
PSE13 The TSA degradation process within cement-based materials in the electrical field environment C. Wang, Z. Fang and Y. Luo, Chongqing University, China
TIM14 Similarity analysis of rebar corrosion under different electrochemical accelerated method C. Fu, J. Chen and X. Jin, Zhejiang University of Technology, China; H. Ye, University of Hong Kong, China; J. Zhu, Zhejiang University of Technology, China
6
ICDCS Session 7 continued (ICC) ICDCS Session 8 continued (PSE) ICDCS Session 9 continued (TIM)
17:30 – 17:50
Chair
s: K
. B
onin
an
d M
. S
anth
ana
m
ICC16 Durability properties of high performance concrete containing high volumes of supplementary cementitious materials A. Elahi, University of Engineering and Technology Taxila, Pakistan; S.A. Barbhuiya, Curtin University of Technology, Australia
Chair
s: S
. S
riniv
asan a
nd H
. W
ang
PSE14 Study on accelerated microbial corrosion of concrete by artificially intensified sewage L.J. Kong, M.F. Cao, H. Lu and H.R. Lu, Shijiazhuang Tiedao University, China; X.M. Zhou and G. Kastiukas, Brunel University, UK
Chair
s: H
. W
ong a
nd E
. Y
ogara
jah
TIM15 Integrated sensor network for monitoring steel corrosion in concrete structures J.E. Ramón, J.M. Gandía-Romero, R. Bataller, A. Martínez-Ibernón, I. Gasch and J. Soto, Universitat Politècnica de València, Spain
17:50 – 18:10
PSE24 Mechanical and microstructure characteristics of concrete-mixtures designed for durability of RC-structures in corrosive environments S.A. Alghamdi, S. Ahmad, M.M. Khaled, King Fahd University of Petroleum and Minerals, KSA
TIM16 Damage evaluation of full-scale RC slab by ultrasonic tomography H. Hayashida, Civil Engineering Research Institute for Cold Region, Japan; T. Ueda, Hokkaido University, Japan
18:10 – 19:00
Opening reception (Mechanical Engineering 5th floor) Welcome by Professor Peter Jimack, Dean, Faculty of Engineering
19:00 End of day one
19:00 approx.
International Organising Committee Meeting (Mechanical Engineering Board Room 1.31/1.31a)
7
Thursday 19 July 2018
ICDCS 2018 Mechanical Engineering Lecture Theatre A
09:00 – 09:30
Chair
s: T
. U
eda a
nd J
. O
lek KN01 (Keynote)
Service life and life-cycle assessment of reinforced concrete with fly ash and limestone calcined clay cement R. Gettu, R.G. Pillai, M. Santhanam, S. Rathnarajan, A.S. Basavaraj, S. Rengaraju, and D.Yuvaraj, Indian Institute of Technology Madras, India
09:30 – 10:00
KN02 (Keynote) Guiding principles in developing the South African approach to durability index testing of concrete Y. Ballim, University of the Witwatersrand, South Africa; M.G. Alexander, University of Cape Town, South Africa
10:00 – 10:30
KN03 (Keynote) Estimated service life of carbonation exposed (cracked) concrete with pozzolans or self-healing agents P. Van den Heede and N. De Belie, Ghent University, Belgium
10:30 – 11:00
KN04 (Keynote) fib Model Code 2020 – durability design and through life management of new and existing structures F. Papworth, Building and Construction Research and Consultancy, Western Australia; S. Matthews, Building Research Establishment Ltd, UK
11:00 – 11:10
Industrial Presentation (Platinum sponsor) Surface Management Systems
11:10 – 11:40
Coffee, posters and exhibition (Mechanical Engineering 5th floor)
The Adam Neville National PhD Workshop in Conjunction with the Concrete Society Session 1
Civil Engineering Lecture Theatre A
ICDCS 2018 Session 10 Mechanical Engineering Lecture Theatre A
ICDCS 2018 Session 11 Electrical Engineering Agilent Lecture Theatre
ICDCS 2018 Session 12 Mechanical Engineering Lecture Theatre B
Influence of Constituents of Concrete (ICC): Influence of nano fibres
Performance in Service Environments (PSE): Chemical deterioration and ASR
Methods of Improving the Durability and Service Life (MID): Surface treatments and admixtures
11:40 – 12:00
Chair
: R
. Jones
Recycling geopolymers in portland cement mixes: potential and implications Napoleana Anna Chaliasou, University of Bath, UK
11:40 – 12:00
Cha
irs: S
. S
hah
an
d J
. U
kpa
ta
ICC17 Post-cracking behavior of cementitious composite incorporating nano-silica and basalt fiber pellets A.G. Bediwy, M.T. Bassuoni and E. El-Salakawy, University of Manitoba, Canada
Cha
irs: L
. B
lack
an
d
I. R
afiq
PSE15 Emerging rapid aggregate and concrete test methods for formulating ASR-resistant concrete K.W. Liu and A.K. Mukhopadhyay, Texas A&M University, USA C
ha
ir:
S. M
an
jrekar
and
T.
Su
giy
am
a
MID01 Surface treatments for concrete under physical salt attack M.R. Sakr1,2 and M.T. Bassuoni1
1University of Manitoba, Canada 2Benha University, Egypt
8
19th July The Adam Neville National PhD Workshop in Conjunction with the Concrete Society Session 1 continued
ICDCS Session 10 continued (ICC) ICDCS Session 11 continued (PSE) ICDCS Session 12 continued (MID)
12:00 – 12:20
Chair
: R
. Jones
Durability and long-term structural performance of GFRP bars in concrete Hamed Fergani, University of Sheffield, UK
12:00 – 12:20
Chair
s:
S. S
hah a
nd J
. U
kpata
ICC18 Strength and durability performance of ultra-high-performance cementitious composite enhanced with carbon nanofibres J.L.G. Lim, S.N. Raman,
M.F.M. Zain and R. Hamid, Universiti Kebangsaan Malaysia, Malaysia; F.C. Lai, Bangunan PanGlobal, Malaysia
Chair
s:
L. B
lack a
nd
I. R
afiq
PSE16 Performance of anaerobic digestion systems: a review D.A. Thompson, S. Nanukuttan and D. McPolin, Queen’s University Belfast, UK
Chair
s: S
. M
anjr
ekar
and T
. S
ugiy
am
a
MID02 Development of a new method to reduce drying shrinkage of concrete by applying urea K. Shirayama, H. Fujiwara, M. Maruoka and L. Lingling, Utsunomiya University, Japan
12:20 – 12:40
Early age behaviour and cracking risk of concretes containing GGBS Fragkoulis Kanavaris, Arup Group, UK
12:20 – 12:40
ICC19 Polymer binder, impact on the pull-out force of macro fibers in sprayed concrete K. Bonin and C. Neumaier, Wacker Chemie AG, Germany
PSE17 Influence of surface retarders on texture profile and durability of upper layer of exposed aggregate concrete pavement M. Dąbrowski, M.A. Glinicki, K. Gibas, A. Antolik and K. Dziedzic, Polish Academy of Sciences, Poland
MID03 Field and laboratory investigations on the use of fly ash and li-based admixtures to prevent ASR in concrete B. Fournier, Université Laval, Canada; A. Bilodeau, and N. Bouzoubaa, P-C. Nkinamubanzi, National Research Council of Canada, Canada
12:40 – 13:00
Smart tailoring of calcium-silicate-hydrates: low-carbon, multifunctional and resilient concrete Muzzamil Shakil, University of Bath, UK
12:40 – 13:00
ICC20 Workability and freeze-thawing performance of fiber reinforced expansive self-consolidating concrete Q. Cao and Q.Q. Gao, Dalian University of Technology, China
PSE25 Performance of high-volume fly ash self-compacting concrete exposed to external sulfate attack T.S. Al-Attar, University of Technology, Iraq; A.A. Taha, Ministry of Health and Environment, Iraq
MID04 Performance oriented functionalisation of concrete: an integrated approach for prevention in construction A. Gerdes1,2, M. Schwotzer1
and J. Süßmuth3 1Institute of Functional Interfaces, Germany; 2University of Applied Sciences Karlsruhe, Germany; 3IONYS AG, Germany
13:00 – 14:00
Lunch, posters and exhibition (Mechanical Engineering 5th floor)
9
19th July The Adam Neville National PhD Workshop in Conjunction with the Concrete Society Session 2
Civil Engineering Lecture Theatre A
ICDCS 2018 Session 13 Mechanical Engineering Lecture Theatre A
ICDCS 2018 Session 14 Electrical Engineering Agilent Lecture Theatre
ICDCS 2018 Session 15 Mechanical Engineering Lecture Theatre B
Influence of Constituents of Concrete (ICC): Influence of additives and aggregates
Performance in Service Environments (PSE): Corrosion and influence on structural performance
Methods of Improving the Durability and Service Life (MID): Mixed methods of improving durability
14:00 – 14:20
Chair
: R
. Jones
Understanding the mechanism of restraint in edge restrained reinforced concrete walls Muhammad Kashif Shehzad, University of Leeds, UK
14:00 – 14:20
Chair
: B
. M
agee
ICC21 Performance of concrete made with a calcined clay – limestone-portland cement exposed to natural conditions F. Martirena, E. Díaz and D. Rocha, Universidad Central de las Villas, Cuba; H. Maraghechi and K. Scrivener, Ecole Polytechnique Federal de Lausanne, Switzerland
Chair
s: P
. R
yan a
nd M
. T
hom
as
PSE18 Electrochemical behaviour of passive layers in weathered reinforced mortars B. Díaz, B. Guitián, X.R. Nóvoa and M.C. Pérez, University of Vigo, Spain
Chair
s: M
. A
zen
ha
and E
. G
arc
ia-T
aeng
ua
MID05 Improving the spacer-concrete interface for bond strength and durability F. Muslim, H.S. Wong and N.R. Buenfeld, Imperial College London, UK
14:20 – 14:40
A confinement and moisture dependent constitutive model for concrete subjected to transient high temperatures Giacomo Torelli, University of Cambridge, UK
14:20 – 14:40
ICC22 Comparison of alkali-silica chemical reaction of reactive glass and chert aggregate Y. Morinaga, E. Yogarajah and T. Nawa, Hokkaido University, Japan; L. Yorgchaitrakul, Thammasat University, Thailand; E. Iwatsuki, Aichi Institute of Technology, Japan
PSE19 Effect of external loading on durability properties of pre-stressed concrete girders with microcracking S.S. Srinivasan, M. Rung, and R.D. Ferron, University of Texas at Austin, USA
MID06 Study on the performance of new imidazoline electromigration inhibitor in reinforced concrete C. Pan1, C. Yang1, J. Mao1 and W. Jin1,2, 1Zhejiang University, China; 2Zhejiang University, China
14:40 – 15:00
Durability of plain and slag-blended cement systems in combined chloride-sulphate environments Joseph Onah Ukpata, University of Leeds, UK
14:40 – 15:00
ICC23 Influence of mineralogical nature of aggregates on acid resistance of mortar K.P. Ramaswamy, TKM College of Engineering, India; M. Santhanam, Indian Institute of Technology Madras, India
PSE20 Drying shrinkage of hardened cement paste and its relationship to the microstructure X. Wang, C. Wan, X. Zhang and H. Chen, Chongqing University, China
MID07 A novel methodology of powder-based cementitious materials in 3D inkjet printing for construction applications P. Shakor, S. Nejadi and G. Paul, University of Technology Sydney, Australia; J. Sanjayan, Swinburne University of Technology, Australia
10
19th July The Adam Neville National PhD Workshop in Conjunction with the Concrete Society Session 2 continued
ICDCS Session 13 continued (ICC) ICDCS Session 14 continued (PSE) ICDCS Session 15 continued (MID)
15:00 – 15:20
Chair
: R
. Jones
Development of novel connection methods between precast concrete panels Jean Paul Vella, Laing O'Rourke, UK
15:00 – 15:20
Chair
: B
. M
agee
ICC24 Impact of portlandite on alkali-silica reaction of pyrex glass and blastfurnace slag aggregate N. Noguchi, T. Kajio, Y. Morinaga, Y. Elakneswaran and T. Nawa, Hokkaido University, Japan; T. Ayano, Okayama University, Japan
Chair
s: P
. R
yan a
nd M
. T
hom
as
PSE21 Effect of corrosion on the shear transfer behavior of stud shear connectors W. Xue, J. Chen1, A-Y. Jiang and W-L. Jin, Zhejiang University, China; 1Zhejiang University of Science and Technology, China
Chair
s: M
. A
zenha
and E
. G
arc
ia-T
aeng
ua
MID08 Experimental investigation on the ICCP-SS technique for sea-sand RC beams H-S. Liang, J-H. Zhu, F. Xing, Z-W. Zeng, Shenzhen University, China; M-N. Su, University of Manchester, UK; T. Ueda and L-L. Wei, Hokkaido University, Japan
15:20 – 15:40
Effect of time-dependent properties of concrete on the flexural behaviour of reinforced concrete flat slabs with openings Mohammed Abdulrahman, University of Leeds, UK
15:20 – 15:40
ICC25 Study of the deterioration of concrete incorporating sulfide-bearing aggregates J. Duchesne and B. Fournier, Université Laval, Canada; J. Francoeur, Ministère des Transports, Canada
PSE22 Effect of multi- steel bolt anchorages on composite beams H.F Shi, D.W Zhang and W.L Jin, ZheJiang University, China; T. Ueda, Hokkaido University, Japan
MID09 Characterization of vibration effects on the internal structure and strength of regular and high strength recycled concrete J. Smith, R. Rampit and R. Parey, University of the West Indies, Trinidad and Tobago
15:40 – 16:00
Innovative processing of stockpile fly ash Thomas Hope, University of Dundee, UK
15:40 – 16:00
ICC26 Alkali reactive carbonate rocks: is it alkali silica reaction (ASR) or alkali carbonate reaction (ACR)? M.A. Beyene, SES Group & Associates, USA; R.C. Meininger, Turner-Fairbank Highway Research Center, USA
PSE23 Load-bearing capacity of corroded reinforced concrete structures caused by carbonation and exposed to XC4 E. Sistonen, Aalto University, Finland
MID10 Transport properties of steam curing concrete using mineral admixtures K. Sasaki and T. Harada, Nagasaki University, Japan; T. Katayama, Yamau Co. Ltd, Japan
16:00 – 16:30
Tea, posters and exhibition (Mechanical Engineering 5th floor)
11
19th July The Adam Neville National PhD Workshop in Conjunction with the Concrete Society Session 2 continued
ICDCS 2018 Session 16 Mechanical Engineering Lecture Theatre A
ICDCS 2018 Session 17 Electrical Engineering Agilent Lecture Theatre
Repair and Maintenance (RAM): Case studies of repair and maintenance
Durability and Service Life Modelling (DSM): Modelling microstructure and transport
16:30 – 16:50
Chair
: R
. Jones
Use of recycled and secondary aggregates in concrete: deformation properties Chao Qun Lye, University of Birmingham, UK
16:30 – 16:50
Chair
s:
A. B
adr
an
d W
. W
ilson
RAM01 Monitoring historic concrete and associated cementitious repair – a case study of Boathouse 4, Portsmouth Historic Dockyard, UK A.H. Alwaal, S. Barnett, R. Inkpen and L. Hastewell, University of Portsmouth, UK
Chair
s:
N. D
e B
elie
an
d H
. F
ujiw
ara
DSM01 Modelling of capillary pore structure evolution in portland cement pastes based on irregular-shaped cement particles C. Liu, M. Zhang, G. Fang and Y. Bai, University College London, UK; Y. Zhang, Southeast University, China
16:50 – 17:00
Chair
: E
. G
arc
ia-T
aeng
ua
The Adam Neville Prize Award 16:50 – 17:10
RAM02 Comparison data between hybrid and galvanic anode installation in the Arousa Island Bridge J.A. Becerra-Mosquera, Neto Ingeniería, Spain; D. Carro-López, Universidade Da Coruña, Spain; J.E. Pardo Landrove, Xunta de Galicia, Spain; J.M. Millán Pérez, Galaicontrol, Spain
DSM02 Pore structure characterization and transport performance simulation of cement hydration based on irregular particles Z. Liu, W. Chen and H. Lv, China University of Mining and Technology, China; Y. Zhang,
Southeast University, China; C. Liu, University College London, UK
17:10 – 17:30
RAM03 Efficiency of electrochemical chloride removal from concrete at different environmental temperatures S. Jin, J. Xia and W-L. Jin, Zhejiang University, China; Z-Y. Yu and J-Y. Hu, Zhejiang Electric Power Corporation Research Institute, China; Q. Lyu, Southeast University, China; X. Zhong, Yangzhou University, China
DSM04 Estimating fractal dimension of cement matrix for predicting chloride ingress into cement-based materials Y. Elakneswaran, S. Yoshida, A. Hatanaka and T. Nawa, Hokkaido University, Japan
17:30 End of day two
19:00 – 22:30
Civic reception and dinner (Banqueting Hall, Leeds Civic Hall)
12
Friday 20 July 2018
ICDCS 2018 Mechanical Engineering Lecture Theatre A
09:00 – 09:30
Chair
: D
. H
ooto
n a
nd R
. G
ett
u KN05 (Keynote)
The bond behaviour between concrete and corroded reinforcement: state of the art Y. Zhao, Zhejiang University, China; H. Lin, Tsinghua University, China
09:30 – 10:00
KN06 (Keynote) Analytical and quantitative aspects of surface moisture transport and plastic shrinkage cracking B. Mobasher, Arizona State University, USA; M. Bakhshi, AECOM, USA; Y. Yao, Southeast University, China
10:00 – 10:30
KN07 (Keynote) Performance of RC slabs under the combined effect of applied loads and restrained shrinkage M. Azenha, J.L. Granja, J. Gomes, R. Carvalho, B. Zahabizadeh and A. Edalat-Behbahani, University of Minho, Portugal; R. Faria, L. Leitão and C.F. Sousa, University of Porto, Portugal; D. Schlicke, Graz University of Technology, Austria
10:30 – 11:00
KN08 (Keynote) Mesoscopic model of drying shrinkage and its application into control of shrinkage cracking T. Nawa, Hokkaido University, Japan
11:00 – 11:30
Coffee, posters and exhibition (Mechanical Engineering 5th floor)
ICDCS 2018 Session 18 Mechanical Engineering Lecture Theatre A
ICDCS 2018 Session 19 Civil Engineering Lecture Theatre A
Repair and Maintenance (RAM): Methods of improving ASR resistance Durability and Service Life Modelling (DSM): Corrosion and service life modelling
11:30 – 11:50
Chair
s:
S.
Adu
-Am
ankw
ah a
nd R
. N
ovoa
RAM05 Distribution of lithium nitrite injected into concrete and its ASR suppression effect K. Kobayashi and K. Rokugo, Gifu University, Japan; Y. Takagi, Nishimatsu Const. Co. Ltd, Japan; T. Otani, Hanshin Expressway Co. Ltd, Japan
Chair
s: P
. R
obe
ry a
nd
B. S
ury
anto
DSM05 Residual service life estimation and its importance for pretensioned concrete (PTC) bridges in coastal cities D. Joseline, D. Kamde, S. Rengaraju and R.G. Pillai, Indian Institute of Technology Madras, India
11:50 – 12:10
RAM06 A “double-multi” model for electromigration of lithiums and chlorides in ASR affected concrete Q.F. Liu, L.X. Mao and Z. Hu, Shanghai Jiao Tong University, China, and Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration (CISSE), China; J. Xia, Zhejiang University, China; G.L. Feng and L.Y. Li, University of Plymouth, UK
DSM06 An image-based local homogenization method to model mass transport at the steel-concrete interface Z. Zhang and U. Angst, ETH Zurich, Switzerland; A. Michel and M. Jensen, Technical University of Denmark, Denmark
12:10 – 12:30
ICC09 Comparison of lithomarge and cement-based mortars performance in aggressive aqueous environments J. Kwasny, T.A. Aiken, M.N. Soutsos and D.J. Cleland, Queen’s University Belfast, UK; J.A. McIntosh, banah UK Ltd, UK
DSM07 A new model for corrosion-induced concrete cracking X. Xi, S. Yang, University of Strathclyde, UK; C. Li, RMIT University, Australia
12:30 – 12:50
DSM08 Meso-scale fracture modelling of concrete cover induced by non-uniform corrosion of reinforcing bar X. Xi and S. Yang, University of Strathclyde, UK; C. Li, RMIT University, Australia
13
12:50 – 14:00
Lunch, posters and exhibition (Mechanical Engineering 5th floor)
ICDCS 2018 Session 20 Mechanical Engineering Lecture Theatre A
ICDCS 2018 Session 21 Civil Engineering Lecture Theatre A
Design for Durability and Service Life (DDS): Design for durability and service life
Durability and Service Life Modelling (DSM): Modelling chemical attack, frost damage and ASR
14:00 – 14:20
Chair
s: J. G
uili
kers
and F
. P
apw
ort
h
DDS01 Durability design based on serviceability stage for corroded reinforced concrete structures X.P. Zhong, J. Zhu and C.B.Yuan, Yangzhou University, China; W.L. Jin and J. Xia, Zhejiang University, China (presented by K. Wu)
Cha
irs:
S. A
lgham
di and
S. B
ern
al
DSM09 Establishment of a numerical model for sulfate attacked concrete considering multi-factors S.S. Qin, D.J. Zou, J. Jiang, and T.J. Liu, Harbin Institute of Technology, P.R. China
14:20 – 14:40
DDS02 Durability design of segmental linings for intended service life of tunnels M. Bakhshi and V. Nasri, AECOM, USA (presented by B. Mobasher)
DSM10 FEM analysis of structural behaviour of reinforced concrete beam under the effect of frost damage Z. Wang and T. Ueda, Hokkaido University, Japan; H. Hayashida, Civil Engineering Research Institute for Cold Region, Japan; D. Zhang, Zhejiang University, China
14:40 – 15:00
DDS03 First principles-based design of economical ultra-high performance concrete A. Arora, M. Aguayo, F. Kianmofrad, Y. Yao, B. Mobasher and N. Neithalath, Arizona State University, USA
DSM11 A novel multiscale modelling approach for evaluation of the ASR in concrete structures M. Jalal, M. Mirsayar and A.K. Mukhopadhyay, Texas A&M University, USA
15:00 – 15:20
DSM12 Social dimensions in sustainability evaluation of deteriorating reinforced concrete bridges Z. Wang, W. Jin and K. Wu, Zhejiang University, China; D.M. Frangopol, Lehigh University, USA
15:20 – 16:00
Closing plenary Chaired by P.A.M. Basheer and J. Olek
16:00 – 16:30
Tea break (Mechanical Engineering foyer) and end of conference
14
POSTERS
ICC-PO1 The influence of waste glass powder on the chloride binding capacity of fly ash/cement hardened paste J.H. Yan, Beijing University of Technology, China; T.Y. Hao, MCC Central Research Institute of Building and Construction, China
ICC-PO2 The effect of calcium nitrate on the hydration of calcium aluminate cement at different curing temperatures H. Wang, G. Diao and G. Liu, China Building Materials Academy, China; H. Wang, State Key Laboratory of Green Building Materials, China; L. Gao, Shijiazhuang Tiedao University, China; G. Liu, Kaifeng Qiming Refractory Materials Co. Ltd, China
ICC-PO3 Absorption, porosity, capillarity and chloride diffusion in ultra high performance concretes J.M. Gandía-Romero, J.E. Ramón-Zamora, I. Gasch, M. Valcuende, V. Calvet, R. Calabuig and P. Serna, Universitat Politècnica de València, Spain
ICC-PO4 New model for natural carbonation prediction in reinforced concrete – concept and validation on chemical admixtures S.O. Ekolu and M. Raats, University of the Johannesburg, South Africa
ICC-PO5 Effect of mix parameters on strength of geopolymer mortars - experimental study A. Naghizadeh and S.O. Ekolu, University of the Johannesburg, South Africa
PSE-P01 Durability of cement-based materials in drinking water storage M. Schwotzer, Karlsruhe Institute of Technology (KIT), Institute of Functional Interfaces (IFG), Germany; A. Gerdes, Karlsruhe Institute of Technology (KIT), Institute of Functional Interfaces (IFG), Germany, and University of Applied Sciences Karlsruhe, Germany
MID-P01 Improvements of the carbonation resistance of concrete after steam autoclave curing G. Li, J. Yue and F. Yao, China University of Mining and Technology, China
RAM-P01 Rehabilitation of low rise RCC structure along 9m high retaining wall A. Nakhawa, Non Destructive Testing and Rehabilitation Experts, India; V.B. Deshmukh and V.J.T.I. Matunga, Mumbai, India