Network PA Systems - TOA...VX-3000 Series Integrated Voice Alarm & Public Address System Description The issue of security is more than ever important. Our VX-3000 is a reliable, energy-saving,

Network PA SystemsApplication Examplewww.toa.com.hk

VX-3000 Series Integrated Voice Alarm & Public Address System

Description

The issue of security is more than ever important. Our VX-3000 is a reliable, energy-saving, EN 54-16 compliant voice alarm system that combines all important functions in one unit frame. The limited number of components makes the design and installation much easier, as well as saving space and reducing cable complexity. This enables rapid system configuration and makes the VX-3000 a cost effec-tive system.

It comes with low loss modular class D amplifiers, with 3 different output ratings. These can easily be removed or replaced simply by unplugging them; there is no need for specialist tools. By using low loss modular class D amplifiers and modern power suppy switching technology the system becomes much more energy efficient and keeps the operating costs low.

Thanks to its flexible and scalable system architecture the VX-3000 system can be used for both small and large applications, with up to 256 remote microphones and 128 audio sources.

System Features

Compact: All functions, all inputs and outputs in one unit

Cost effective: Easy system configuration thanks to small number of system components

Flexible: 128 Broadcast of many different audio signals simultaneously, flexible speaker driving from 1 zone per amplifier up to 64 zones per amplifier

Scalable: up to 256 remote microphones,� 128 audio source input and 512 zone.

Light-weight: Modern supply switching technology and digital amplifiers

Energy saving: Standby function for low power consumption during battery backup reduces the required battery capacity

Decentralized: IP Network based

Advanced ambient noise control (ANC)

Master-less system provides high security if one line fails

Maximum System Capacity

Output Power 64,000 W

Speaker Zones 516

Remote Mic Connection 256

Audio Source Input 128

VX-3000 Series Typical Solution: Hotel

Advantages

Room for placing equipment is always a concern in planning of projects in Hong Kong. VX-3000 all-in-one design included all components of a PA system within a single frame. The compact design fits in different parts of the building facilitating the unexperienced flexibility in system design. A single frame performs most function of a PA system including: - Zone selection & paging - BGM / announcement broadcast - Build-in pre-recorded message storage

Every frame can function as an individual system ideal for clubhouse and gymnasium use, and yet still be connected to each other through network forming an extensive system for the entire hotel or commercial high-rise.

RM-300XRemote Microphone

CD Player

CD Player

Digital Announcer

Audio Signal Cable

CAT5 Network cable

Speaker Cable

CD Player

VX-3000DSPower Supply Unit

Corridor & Hotel Room(2/F-6/F)



VX-3016F Frame

Swimming Pool(1/F) Gym Room(1/F)

Lobby(G/F) Restaurant(G/F)

VX-3004F Frame

Restaurant kitchen(G/F)

Bar & Lounge(G/F)

Reception(G/F)

VX-3008FFrame

Fire Alarm Signal

Fire Alarm Signal

Fire Alarm Signal

RM-300XRemote Microphone

- Equipment and speaker line surveillance - Stand-by amplifier

VX-3000 Series Typical Solution: Hotel

VX-3000 Series Frames

VX-3004F

VX-3004F / VX-3008F / VX-3016F

VX-3000 Series Amplifiers Modules

VX-050DA

Low loss modular class D amplifiers

Modules to be mounted in the frame units

3 different power levels: 150W, 300W or 500W

Can easily be removed or replaced simply by unplugging them; no need for special tools

Dust filter, easy to clean

100 V Output without transformer resulting in light weight units

Fuse easily accessible from rear

VX-015DA / VX-030DA / VX-050DA

VX-3004F: up to 4 amps (1-zone - 1 amp, 4 AB-zones or 3 AB zones + standby amp)

VX-3008F: up to 3 amps (8 zones switching between 2 amps + standby amp or 8 zones freely assignable to 1 of 2 amps)

VX-3016F: up to 2 amps (16 switched zones + standby amp or 2 x 8 switched zones)

All mandatory indications by EN54-16

Status Indication for each speaker line

Fault acknowledge and lamp test button

Input DSP: flexible filtertypes and compressor

Output DSP: flexible filtertypes, compressor and delay up to 2.7 sec.

Specifications

Power Source

Power Comsumption

Speaker Output

Power Amplifier

Audio Input

RM Link

LAN

Control Input

Control Output

ATT/Control Output

Finish

Dimensions (W x H x D)

Weight

VX-3004F

18 W at 31 V DC

4 AB Zones

4

8

7.6 kg

VX-3008F

18 W at 31 V DC

8

3

8

7.9kg

VX-3016F

16

2

16

31 V DC ( Operating Range: 20 - 40 V DC)

4 (Line: -20dBV / Mic: -60dBV, phantom power selectable)

2 (max. 8 RM)

2

16 + 2 (FDS)

8 + 3 (CPU OFF)

Panel: Surface treated steel plate,

black, 30% gloss, paint

482 x 132.6 x 345 mm (19”, 3U)

Specifications

Power Source

Amplification System

Rated Output Power

Supported Loads

Frequency Response

Distortion

Finish

Dimensions (W x H x D)

Weight

VX-015DA

150 W (100V)

VX-030DA

300 W (100V)

VX-050DA

500 W (100V)

31 V DC ( Operating Range: 20 - 40 V DC)

Class D

50V / 70V / 100V

40 Hz - 16 kHz ±3dB

1% or less (at 100 V line, A-weighted)

Surface treated steel plate

79 x 91 x 358.2 mm

1.4kg

VX-3000 Series Power Supply Unit

VX-3000DS

DC power supply to all system components

Combination of two built-in power source units with a high-performance charger

Automatical switch to auxiliary battery power if the AC power supply is down

VX-3000DS

Specifications

Power Source

Power Consumption

DC Power Output (AC mode)

DC Power Output

Charging Method

Charging Output Voltage

Battery Connection

Control Connector

DS LINK IN/OUT

Panel Indicator

Finish

Dimensions ( W x H x D )

Weight

VX-3000DS

220 - 230 V AC, 50 / 60 Hz

2800 W max. in total (at rated output with charging), 350 W max. each (EN60065)

Rated output: 2300W (31V, 72.5A, total DC power output), Peak output: 2780W (29V, 96A, total DC power output)

8 x 31V ( 19 - 33 V) 25A max. each, M4 screw terminal, distance between barriers: 11mm

3 x 31 V ( 19 - 33 V) 5A max. each, removable terminal block ( 3 x 2 pins)

1 x 24 V ( 16 - 25V) 0.3A max., removable terminal block ( 1 x 2 pins)

Temperature compensated trickle charging

27.3V ±0.3V (at 25°C), Temperature correction coefficient: -40mV/°C

One each positive and negative terminal, applicable cable diameter: AWG 6 - AWG 0 (AWG 1/0) (16mm2 - 50mm2), line resistance within 4 mΩ / total

RJ45 female connector for connecting the system and cascade connection, shielded twisted-pair straight cable (TIA/EIA-568A standard),

Type of control signal: Battery check, AC power status, DC power status, charging circuit failure, battery failure and communication

AC power IN 1, IN 2 (Green), charging (Green), battery power (Green), battery connect (Green), battery condition (Green)

Panel: Surface-treated steel plate, black, 30% gloss, paint

482 x 132.6 x 400.5 mm (19”, 3U)

11.8 kg

VX-3000 Series Remote Microphone

RM-300X

For emergency & general purpose broadcast

Zone selection or all call

PC-programmable system software permits desired functions to be assigned to individual function keys (equipped with 2 LED indicators)

RM-210F: Key extension unit with 10 additional keys

Up to 7 RM-210F extension units can be used with each RM-300X Remote Microphone

RM-300X / RM-210F

RM-210F

Options

AD-246: Power supply unit

WB-RM200: Wall-mounting bracket

Specifications

Power Source

Current Consumption

Audio Output

External Microphone Input

Frequency Response

Distortion

Signal-to-noise Ratio

Volume Control

Key Extension

Maximum Cable Distance

Finish


Weight

RM-300X

24 V DC (operating range: 15-40 V DC), supplied from the audio input

unit or DC input power supply connector

Under 240 mA

0 dBV, 600Ω, balanced

-40 dB, 2.2kΩ, unbalanced, mini jack, phantom powering

100 Hz - 20 kHz

Under 1%

Over 60dB

Microphone volume control, Monitor speaker volume control

Max. 7 RM-210F

1,200 m

190 x 76.5 x 215 mm (gooseneck microphone excluded)

850g

RM-210F

From remote microphone

80 mA max. (from remote microphone)

-

-

-

-

-

-

10 keys, freely assignable

-

110 x 76.5 x 215 mm

350g

ABS resin, black

VX-3000 Series Emergency Remote Microphone

RM-200SF

For emergency broadcast

For activation of emergency mode, start and stop automatic broadcasts of emergency announcements, reset emergency signals, and live microphone announcements

CPU-switch for emergency broadcast to all zones even in case of a CPU error

Up to 4 RM-320F extension units can be used with each RM-200SF remote microphone

RM-200SF / RM-320F

Specifications

Power Requirement

Distortion

Frequency Response

Signal-to-Noise Ratio

Audio Output

Microphone

Volume Control

Key Extension

Finish


Weight

RM-200SF

24 V DC (operating range: 15 - 40 V DC)

Under 1%

200 Hz - 15 kHz

Over 55dB

0 dBV, 600Ω, balanced

Unidirectional dynamic microphone AGC

Microphone, speaker

Max. 4 RM-320F

200 x 215 x 95 mm

1.48kg

ABS resin, bluish gray ( PANTONE 538 or its equivalent)

RM-320F

RM-320F

From remote microphone

-

-

-

-

-

-

20 keys, freely assignable

175 x 215 x 70 mm

700g

Options

RM-210: Key extension unit

WB-RM200-Wall-mounting bracket

IP-1000 Series IP Network Audio Management System

Description

With all equipment connectable to an ordinary IP network, IP-1000 series, the true digital matrix system is expandable to any locations with network access.

The name “IP-1000” is used to highlight its extensive capacity for supporting 1000 IP address in one single system. The vast capacity and flexibility allows easy system expansion beyond conventional system coverage.

What is more, the single management & operation software allows user to make instant broadcast and scheduled announcement through one single computer work station which covers most wanted function in school application.

System Features

IP powered speaker can broadcast messages from both network and local input with priority adjustable in the software

IP-1000AF Audio Interface Unit is comapact in size and can be mounted to different surfaces with high flexibility.

No dedicated server: Any computer installed with the IP-1000S System Management Software becomes the server and also a workstation of the system. Both setting and operation can be performed in one single computer.

Pre-record messages and real time recording provides flexibility in making announcement.

Allow interfacing with fire alarm system.


Able to link with 1000 IP Addresses

No limitation on audio channel

IP-1000 Series Typical Solution: School

Advantages

IP-1000S System Management Software turning ordinary computers in principal room, office and reception into work station allows increasing the number of control point without extra cost and space.

Flexibility does not only come from network connection but also different level of integration with existing conventional equipment. - IP-1000AF provide means for existing amplifier to go network by converting analogue signals in and out the network.- IP module, AX series and DA-502H digital amplifier connects existing speakers to network by providing output power from 120W to 500W to meet different requirement.- IP-speaker not only provide flexibility in installation but also usage by having local input to integrate with local equipment like classroom amplifiers or wireless microphone.

IP-1000AFCompact Audio Interface

Audio Cable

CAT5 Cable

Speaker Cable

SA-112Classroom Amplifier

AX-0120 Compact Amplifier

BS-P1030WIP1IP Powered Universal Speaker

BS-P678IP1IP Powered Wall Mount Box Speaker

BS-P678EMount Box SpeakerIP-1000CI

Network Control Input Unit

Principal Room Corridor

Classroom

Playground

BS-P678IP1IP Powered Wall Mount Box Speaker

Computer installed with IP-100S

System Manager

IP-100RMIP Remote Microphone

Teacher Office

Fire Alarm Signal

Local Input

Canteen

CD Player

...

BS-1030WUniversal Speaker

IP-100RMIP Remote Microphone

Power Source

Current Consumption

Audio Input

Audio Output

Frequency Response

Control Contact Input

Relay

Normally Closed Contact (NC)

Common Contact (COM)

Normally Open Contact (NO)

Network I/F

Network Protocol

Operation Temperature

Operation Humidity

IP-1000AF

IP-1000AF

IP-1000 Series Compact Audio Interface Unit

Specifications

Can be mounted to different surfaces Able to act as both input and output units in the network system

IP-1000AF

Suitable Voltage

Suitable Mains Frequency

Functional Unit Terminal

Network Protocol

Network Chip Rate

Color

Accessories

AC 185V - 260V

50 - 60 Hz

Alarm output terminal, alarm input terminal, power input

terminal, data upgrade terminal, network input terminal

TCP/IP, UDP, ARP, ICMP, IGMP Protocol

10/100Mbps self-adaption

Black

4P connecting terminals (4pcs), 5P connecting terminals

(8pcs), power line (3*1.0mm2/1.5m) (1pc)

IP-1000CI

IP-1000CI

IP-1000 Series Network Control Input Unit

Specifications

IP-1000CI

Receive alarm signal from fire center and trigger to broadcast warning announcement.

DC 24V

Below 85mA

Range: 1V rms (Max: 2V rms), unbalanced 10KΩ

Range: 1V rms, unbalanced 600Ω

Line in (Sampling Frequency: 22k): 20Hz -10kHz

Line out (mp3/Sampling Frequency: 44k): 40Hz -15kHz

Open circuit voltage: 24V DC; short circuit current: ≤5mA

Withstand voltage: 30V DC, control current: 500mA or less



10 BASE-T/100 BASE-TX, auto negotiation

UDP, ARP, ICMP, IGMP

0°C to +40°C

Less than 90% RH (no condensation)

Power Source

Current Consumption

Frequency Response

Amplifier Audio Signal Output

Amplifier Muting Control Output

Amplifier Protection Detection Input

Amplifier Fault Detection Input

Network I/F

Network Protocol


Operation Humidity

DC 24V

Below 85mA

Line out (mp3/ sampling freqency: 44k): 40Hz -15kHz

Range: 1V rms, unbalanced 600Ω

High impedance, max. sink current: 10mA,

withstand voltage : 24V DC

low level, activated, open-circuit voltage: 3.3V

low level, activated, open-circuit voltage: 3.3V

10 BASE-T/ 100 BASE-TX, auto negotiation

UDP, ARP, ICMP, IGMP

0°C to +40°C


IP-100XI

IP-100XI

IP-1000 Series Amplifier Network Module

Specifications

IP-100XI

Allow the amplifier to extent the network function

IP-1000 Series Compact Amplifier

AX-0120/0240

Compact, small size with only half-U size

Energy efficiency, eco-friendly

Volume control, muting control, surveillance and protection circuit function.

Able to extent network function by applying the amplifier network module IP-100XI

AX-0120/0240

Specifications AX-0120 AX-0240

220-240 V AC, 50/60Hz

Class D

Mic in: -60dB* 2.2kΩ, electronically-balanced, removable terminal block (3 pins)

Line in: -10dB* 2.2kΩ, electronically-balanced, removable terminal block (3 pins)

Octocopter output, puncture: DC 35V, control current: below 50mA, removable terminal block (3 pins)

50Hz - 20kHz ±3dB (Line)

1.0% (Line: 1kHz, 1/3 rated output, with audio precision AUX -0025 and LPF 20kHz filter)

Mic: Above 60dB (with audio precision AUX-0025 and A-weighted filter)

Line: Above 80dB (with audio precision AUX-0025 and A weighted filter)

Mic volume control, Line volume control

Power (green) x 1, Signal (green) x 1, Peak (red) x 1, Protect (red) x 1

Forced air cooling

-10°C to +40°C

Below 90% RH (no condensation)

Panel: Aluminum, black, alumite

210 x 54.3 x 290 mm

2.16 kg

Removable terminal block(3 pins) x 4 ; removable terminal block(4 pins) x 1 ; 3x6 screws for mounting brackets x 8

Rack mount bracket MB-15B, wall mount bracket MB-2015ST Q

Power Source

Amplification System

Power Consumption

Audio Input

Audio Output

Control Output

Frequency Response

Total Harmonic Distortion

S/N Ratio

Control

Indicator

Cooling


Operation Humidity

Finish

Dimensions ( W x H x D)

Weight

Accessories

Optional Parts

40W (GB8898 standard)

152W (rated output)

Speaker out: 120W (100V/ 83Ω), removable terminal block (4P)

Line out: 0dB*, 10kΩ, electronically-balanced, removable terminal block(3P)

61W (GB8898 Standard)

296W(rated output)

Speaker out: 240W (100V/ 42Ω), removable terminal block (4P)

Line out: 0dB*, 10kΩ, electronically- balanced, removable terminal block(3P)

*0 dB = 1V

BS-P678IP1/E

IP Powered Wall Mount Box Speaker/

Wall Mount Box Speaker

BS-P1030BIP1/WIP1

IP Powered Universal Speaker

TZ-P406BIP1/WIP1

IP Powered Column Speaker

IP-1000 Series IP-Powered Speaker

Can override and incorporate with local PA system without affect the central broadcast.

Local line input of IP powered speaker allow the speaker to broadcast messages from both network and local input with different priorities, ideal for classroom application.

BS-P6781P1/E / BS-P1030BIP1/WIP1 / TZ-P406BIP1/WIP1

Specifications

Speaker Unit

Power Source

Power Consumption

Impedance

Sensitivity

Frequency Response

Input Terminal

Network Input

Network I/F

Network Protocol


Operation Humidity

Finish


BS-P678IP1

DC 24V / 1A

1.85 W

Range: 1V rms (Max: 2V rms), unbalanced

10kΩ

10 BASE-T/100BASE-TX, Auto negotiation

UDP, ARP, ICMP, HTTP, IGMP

BS-P1030BIP1/WIP1

4.8” (12cm) full range

DC-24V / 2.7A

(Static Power): 1.85W

8Ω 30W

90dB (1W, 1m)

80Hz-20kHz

European standard 2 pins

Range: 1Vrms (Max: 2Vrrms),

Unbalanced, 10kΩ

10BASE-T/100BASE,Auto Negotiation


-20°C to +40°C


Enclosure: ABS resin

196 x 290 x 150 mm

With built-in amplifier, allow the speaker to chain with one more ordinary speaker to provide larger coverage

Allow easy system expansion without difficult wiring and installation work.

3 model of IP-powered speakers fulfil different usage.

BS-P678E

-

-

-

-

-

6”(16cm) double cone type

8Ω 10W

94 dB

150Hz - 20kHz

European standard 2 pins

-20°C~+40°C


Cainet: Particle board, off-white

Grille: Surface-treated steel plate net, off-white

250 × 190 × 110 mm

TZ-P406BIP1/WIP1

10cm cone ×4, waterproof

DC24 / 2.7A

1.85 W

4Ω 40W

92 dB (1W, 1m)

150Hz-16kHz

European standard 2 Pins

Range: 1Vrms (Max:2Vrms), Unbalanced,

10kΩ

10BASE-T/100BASE-TX, Auto Negotiation


-20°C to +40°C


Enclosure: ABS resin

135 x 498 x 128 mm

IP-1000 Series IP-Remote Microphone

IP-100RM

15 function keys

Up to 9 sets of RM-210 connected can be linked

Expandable to up to 105 function keys

Can support Max. 1000 zoning RM-110: Extension unit with 10 keys with similar functions as the remote microphone IP-100RM

IP-100RM / RM-110

RM-110

Specifications

Power Source

Current Consumption

Audio Input

Audio Output

Frequency Response

Line in

Line out

Control Input

Build-in Monitor Speaker

Volume control

Number of Function Keys

Maximum Zoning Support

Network I/F

Network Protocol


Operation Humidity

Finish

Dimensions ( D x W x H )

IP-100RM

DC24V

Below 200mA (single IP-100RM), below 500mA (connected with 9 pieces of RM-110)

Range: 1V rms (Max: 2V rms), 10kΩ electronically balanced gooseneck microphone

Range: 1V rms, unbalance 600Ω

(Sampling rate: 22k), 20Hz -10kHz

(MP3 / sampling rate: 44k), 20Hz - 20kHz

Optic coupler shortage input, open voltage DC 5V,

maximum shortage current larger or equal to 5mA

Maximum output 1.125W

Microphone volume control, monitor speaker volume control

15 on single equipment. Expandable to 105 with 9 sets of RM-210 connected.

1000

10 BASE-T / 100 BASE-TX Auto Negotiation


0°C to +40°C


ABS resin, bluish gray

190 x 76.5 x 21.5 mm (not included the gooseneck microphone)

RM-110

-

Less than 20mA (IP-100RM DC power input)

-

-

-

-

-

-

-

10

-

-

-

0 °C to +40°C


ABS resin, bluish gray (PANTONE 538 or equivalent)

110 x 76.5 x 15 mm

*0 dB = 1V

CPU

Motherboard

RAM

Display Card

Harddisk

Power Source

OS

Intel Core i3 B-4150 or above

Intel 97 series chipset or above, sound card,

1000Mbps network adaptor

DDR3 4G

Dedicated display card with 16G or above.

With 2 or above video output. Provide VGA, DVI, etc.,

general output terminal

SATA2 7200 rpm or above. 500GB or above

Power Source: above 300W

OS: Windows 7 / 8 /10 Professional

IP-1000S

IP-1000 Series System Management Software

IP-3000 Series IP Network Voice Alarm System

Description

IP-3000 Series is a browser controllable, large capacity IP-based network voice alarm system. It is an all- purpose Network Voice Alarm system with TOA’s advanced packet audio technology assuring higher levels of security, versatility and sound quality.

This system is equipped with web browser viewer system, composed of server, audio interface, analog microphone and web viewer. Using a PC or a portable device without installing any specific software, you can monitor broadcast / failure status, control broadcast or sound volume and setting system by the control GUI with browser in everywhere. The Web Viewer can also use as a microphone console, that serves as hardware buttons or LED indicators of IP microphone. Equipment connection check function can also be done easily and conveniently. When a equipment is disconnected from network, the server will send e-mail to report the error.

High quality audio with 48kHz, 16bits sampling size and wide frequency response with 20Hz - 20kHz of IP-3000 series make it suitable for market that required good BGM quality. 3 priorities of emergency, General, BGM are also available for broadcasting.

System Features

48 kHz, 16 bits sampling size

Frequency response: 20Hz - 20kHz

Audio Interface is equipped with DSP functions: TRIM, Volume Control, HPE, EQ, LPF, COMP and Delay.

Remote microphone with recording function


Inputs Max. 4096

Outputs Max. 4096

Audio channel Max. 1024

Priority levels Max. 300

‘Packet Audio’ technology can ensure real time and stable audio and control signal transmission over IP network

IP network connection alllows system expansion without limitation of distance and location

Star Connection Topology

Web viewer is able to manage full functions: status monitoring, control and setting.

IP-3000 Series Typical Solution: Grade A Commercial Office

Advantages

Audio Cable

CAT5 Cable

Speaker Cable

Network

IP-3000System Manager

IP-3010AFAudio Interface Unit



IP-300RMIP Network Remote

Microphone

Tablet

Amplifier

Amplifier

Mobile Control Point

Security Room

CD Player

CD Player

Amplifier

With its extensive capacity and network ability, IP-3000 is particularly suitable for commercial complex and A-graded commercial building with extensive area.

IP-3000 vast capacity of 4096 audio input and output matrix can cope with the most complicated zoning and audio routing operation precisely. The use of TOA originated “Packet Audio” prevents any loss in message occurs during network transmission. Recovery mechanism of “Packet Audio” ensures both completeness and quality of the message.

The control GUI of IP-3000 requiring no software to be installed in any device but by logging-in to the system network. Control points can easily be added by adding any mobile device like tablet or notebook computer with Wi-Fi function.

...

...

...

...

...

CD Player

...

...

...

...

...

...

...

...

...

...


Tablet


Tablet

Can manage and control the whole voice alarm system with maxmium 1024 X 1024 input/output.

Dynamic backup function is available if 2 units of network system manager are linked.

Can implement the IP streaming media transmission of the Analog audio input 4CH, Analog audio output 4CH

Can implement the signal control of the 16 control input / 16 control output.

Power Source

Power Consumption

Control Input

Control Output

Network Section

Audio Input

Audio Output

Frequency Response

Switch

Indicator

Volume Control

Finish


Weight

Accessory

Option

IP-3010AFModel No.

IP-3000 Series System Manager

IP-3000SM

IP-3000SM

Power Source

Maximum no. of iputput/output

Bus no.

Priority Control

Maximum no. of control input/output

Event Log

Emergency Log

Sampling Frequency

Frequency Response

Network Protocol

Connector

Operating Temperature

Colour


100-240 V AC wide range

1024 x1024

1024

300 Step

4096

Max. 1,000,000 log

Max. 1,000,000 log

48KHz

20~20KHz

TCP/IP

RJ-45: 2 RS-232: 1

-10°C to 50°C

Black

427 x 366 x 89.2 mm

Specifications IP-3000SM

IP-3000 Series Audio Interface Unit

IP-3010AF

IP-3010AF

220V AC 50Hz, 24V DC

AC: 0.22A or less DC: 1A or less (energy is supplied for removable terminal block 2P)

16 channels, no-voltage make contact input, open voltage: 24V DC, short-circuit current, 5mA or less, removable terminal block(20P)

16 channels, relay contact output, withstand voltage: 24V DC, maximum current: 500mA, removable terminal block (32P)

Network I/F:100BASE-T x1

Network Protocol: TCP, UDP, ARP, RTP, CMP, TTP, IGMP, FTP

4 channel electronically-balanced input, supplier voltage with phantom power: 17V, MIC -60dB*1/LINE 0dB*1,

input impedance 2.2kΩ, removable terminal block 3P ×4, (adopter, balanced input can be chosen)

channel electronically-balanced input, 0dB*1, 10kΩ, removable terminal block (3P×4). (adopter, balanced output can be chosen)

MIC 100Hz~16kHz±3dB, LINE 20Hz~20kHz±3dB

Reset switch Front ; DIP Switch Back: switch MIC/LINE, switch on phantom power

Network LNK/ACT: green x1, Status: green x1, Signal: green x4, Peak: red x4, Output: green x4, Power indicator green x1

4 channel input volume knob, back

Steel plate, black (munsell N1.0 or equivalent color)

420 x 44.3 x 360 mm

4.3kg

AC Adapter x1, Plastic foot x4, Screw for fitting plastic foot x4, Removable terminal plug 2P x1, Removable terminal plug 3P x8,

Rack Mounting bracket MB-15B x2, Removable terminal plug 10P x2, Removable terminal plug 16P ×2, Screw for rack mounting ×8

Wall Mounting bracket: MB-2015ST Q

Connector: RJ45 connector

Voice Sampling Frequency: 48kHz, 16 bit

The microphone and control interface can choose the broadcasting zone

Can implement the IP streaming media transmission of Analog audio input 1CH, Analog audio output 1CH.

Can select any audio channel for monitor output

IP Microphone: Direct connect to IP network

Power Source

Power Consumption

Control Input

Network connection

Audio Input

Audio Output

Frequency Response

Microphone

Keys

Indicator

Volume Control

Finish


Weight

Option

220V AC, 50Hz

130mA or less

no-voltage make contact input, no screw terminal plug open voltage: DC24V, short-circuit current: 5mA or less

for 100BASE-T network connection, ethernet RJ45 plug

-20dB*1, 10kΩ, unbalanced, φ 33.5mm Stereo Mini Jack

0dB*1, 600Ω, unbalanced, φ 3.5mm Stereo Mini Jack (adaptor, balanced output can be chosen)

20Hz-20kHz(MIC 100Hz-16kHz)

Unidirectional electret condenser microphone

13 zone selection keys, emergency key x1, talk key x1

Power indicator : green x1, failure indicator : orange x1, emergency Indicator : red x1, selection indicator : green/orange x13

Audio input volume control, studio monitor volume control, audio input volume control, microphone volume control, monitor speaker volume control

Panel: ABS resin, black ; Case: steel plate,black (munsell N1.0 or equivalent color)

190 x113 x 216.5 mm (without goose neck microphone)

1.5kg

AC Adapter x1, power cable x1

IP-300RMModel No.

IP-3000 Series IP Network Remote Microphone

IP-300RM

IP-300RM

Model No.

IP-3000 Series Control GUI

OSBrowser

Web browers that can connect to the control GUI

Control GUI function include: Monitor broadcast / failure status, control broadcast or sound volume and setting system

Can operate a portable device as a microphone console

TOA (Hong Kong) Limitedwww.toa.com.hk/

Specifications are subject to change without notice.Printed in Hong Kong

Documents

Network PA Systems - TOA...VX-3000 Series Integrated Voice Alarm & Public Address System Description The issue of security is more than ever important. Our VX-3000 is a reliable, energy-saving,