SCALABLE EMBEDDED PLATFORM – netRAPID 90
Common software application interface• Based on Hilscher’s
Platform strategy a common
software API to the application is offered
• Access from either an external host or the netX 90 integrated
ARM® Cortex M4 application processor
• Three separate channel for cyclic/acyclic Real-Time Ethernet
data, TCP socket / raw Ethernet interface and IIoT data via OPC UA
or MQTT are offered
Industrial Ethernet, Fieldbus and IIoT protocols• Supports all
leading Real-Time Ethernet Slave, Fieldbus Slave and designated
IIOT
protocols in one hardware design
• Including standard IT functions, like Integrated WebServer,
raw Ethernet or TCP socket interface
• Different Software packages for different use cases and memory
options are offered• Basic communication functionality using netX
90 internal memory• Full featured communication functionality
using external memory on netRAPID 90
Companion or Standalone Solution• Scalable embedded platform
with different fl ash and
SDRAM memory options
• Companion solution with 50MHz SPI host interface for
communication only
• Standalone solution using the two integrated ARM® Cortex®-M4
processor cores of netX 90 to separate communication from
application tasks
• Rich set of on-chip peripherals for Motion, Encoder, Sensors
or IO-Link applications (I2C, SPI, UART, CAN, ADC, BiSS, EnDat,
IO-Link)
Preloaded in lot size 1• netRAPID 90 will fully be tested,
preloaded and packed in trays
via an autonomous robot cell
• During the automated production process the communication
stack as well as the customer application can be loaded
• Device manufacturers can receive netRAPID 90 preloaded with
their specifi c content – ready-to-use and even in lot size 1
MM
IO 0
-15
(
GPI
O /
UAR
T /
I2C
/ SP
I / C
AN /
IO-L
ink)
ADC
0-1
RTE_
CH0
Boot
UA
RTLE
D
PIO or SPI
FB_CH0
Q
QSPIFLASH
SDRAM
netX 90
GND
+3.3V
RQ
R
1
36
C
GND
+3.3V
9
28
54
VREF_ADC
BOD
RST_
OU
T
RTE_
CH1
PIO
Enco
der
(
BiSS
/ E
nDat
)
15mm
32mm
RST_
IN
GPIO
ADC 3
SPM
- Ho
st In
terf
ace
SYNC 0/1
MMIO 16/17
CC
CC
C
CC
C
RC
CC
C
R
Communica�on Interface
Standalone Solu�on
Ready-to-use netX 90 design
Fully tested netX 90 design ensures a fast time to market
without development risk
Rapid prototyping without time-consuming iteration process in
the development phase
No demanding BGA production and qualification process
Reduced design and production costs
PCB complexity is encapsulated in netRAPID 90 and does not
affect the baseboard design
Can be preloaded with customer specific content, which reduces
production effort and costs
No time consuming and costly part obsolescence management
Modular & scalable platform
Different memory options for different applications in a single
baseboard design
Well prepared for new emerging technologies like security or OPC
UA @ TSN*
32
Three good reasons to choose netRAPID 90
1
SMD production& AOXI inspection
Packaging& In-time delivery
Functional test& programming ofcustomer-specific
content
.ORG
* 100 Mbit
PRODUCT INFORMATIONTECHNICAL DATA
HEADQUARTERSGermanyHilscher Gesellschaft fürSystemautomation
mbHRheinstraße 1565795 HattersheimPhone: +49 (0) 6190 9907-0 Fax:
+49 (0) 6190 9907-50E-Mail: [email protected]:
www.hilscher.com
JapanHilscher Japan KKTokyo, 160-0022Phone: +81 (0)
3-5362-0521E-Mail: [email protected]
KoreaHilscher Korea Inc. Seongnam, Gyeonggi, 463-400Phone: +82
(0) 31-789-3715E-Mail: [email protected]
SwitzerlandHilscher Swiss GmbH 4500 SolothurnPhone: +41 (0) 32
623 6633E-Mail: [email protected]
USAHilscher North America, Inc. Lisle, IL 60532Phone: +1
630-505-5301E-Mail: [email protected]
IndiaHilscher India Pvt. Ltd.Pune, MumbaiPhone: +91- 8888 750
777E-Mail: [email protected]
ItalyHilscher Italia S.r.l.20090 Vimodrone (MI)Phone: +39 02
25007068E-Mail: [email protected]
SUBSIDIARIESChinaHilscher Systemautomation(Shanghai) Co.
Ltd.200010 ShanghaiPhone: +86 (0) 21-6355-5161E-Mail:
[email protected]
FranceHilscher France S.a.r.l.69800 Saint PriestPhone: +33 (0) 4
72 37 98 40E-Mail: [email protected]
DISTRIBUTORSMore information at www.hilscher.com
Hilscher News:
HilscherAutomationhilscher-automationhilscher.com
@HilscherAutomathilscher-automation
HilscherAutomationhilscher.com
@HilscherAutomat
White Background
Dark Background
HilscherAutomationhilscher-automationhilscher.com
0,8mm 3,5mm 0,8mm 3,5mm
Spaces
Article OverviewNRPEB H90 7600.320 | Evaluationboard equipped
with 1x NRP H90-RE\F8D8
NRP H90-RE\F8D8 (SAMPLE) 7693.102 | Box with 2x NRP H90-RE\F8D8
samples, No software loaded
NRP H90-RE (BOX)* 7691.100 | Box with 10x NRP H90-RE using
Internal Flash and RAM only, No software loaded
NRP H90-RE (BOX)/PNS /ECS /EIS * 7691.100/PNS | Box with 10x NRP
H90-RE using Internal Flash and RAM only, Preloaded with protocol
stack
NRP H90-RE\F8D8 (BOX) 7691.102 | Box with 10x NRP H90-RE\F8D8
equipped with 8 MB SQI Flash and 8 MB SDRAM, No software loaded
NRP H90-RE\F8D8 (BOX)/PNS /ECS /EIS 7691.102/PNS | Box with 10x
NRP H90-RE\F8D8 equipped with 8 MB SQI Flash and 8 MB SDRAM,
Preloaded with protocol stack
NRP H90-RE (TRAY) * 7692.100 | Tray with 56x NRP H90-RE using
Internal Flash and RAM only, No software loaded
NRP H90-RE (TRAY)/PNS /ECS /EIS * 7692.100/PNS | Tray with 56x
NRP H90-RE using Internal Flash and RAM only, Preloaded with
protocol stack
NRP H90-RE\F8D8 (TRAY) 7692.102 | Tray with 56x NRP H90-RE\F8D8
equipped with 8 MB SQI Flash and 8 MB SDRAM, No software loaded
NRP H90-RE\F8D8 (TRAY)/PNS /ECS /EIS 7692.102/PNS | Tray with
56x NRP H90-RE\F8D8 equipped with 8 MB SQI Flash and 8 MB SDRAM,
Preloaded with protocol stack
Technical DataOperating Temperature -20°C ... +85°C (without
airfl ow)
Supply Voltage +3.3 V
Dimensions (L x W x H) 32 x 15 x 4 mm
Communication Interface EtherCAT, EtherNet/IP, PROFINET, 2x
Ethernet 100 BASE-TX, OPC UA, MQTT
Host Interface 50 MHz SPI-Slave
Diagnostic Interface Ethernet, UART RxD/TxD
Technical DataContacting / Pinout 54 solder contacts 1 mm with
1,5 mm grid
LED SYS-System (RUN/RDY), COM-Status 0/1 (COM 0/1),
Ethernet-Status Link, Activity (LINK RX/TX)
Emission EN 55011
Immunity EN 61000-4-3 DIN EN 61000-4-6 Surge - IEC 61000-4-5
Burst - IEC 61000-4-4 ESD - IED 61000-4-2
Certifi cation CE Sign, RoHS
10/2
019
GB
Note: All technical data may be changed without further
notice.
Development board for netRAPID 90** example
@HilscherAutomat
equipped with 8 MB SQI Flash and 8 MB SDRAM, No software
loaded
equipped with 8 MB SQI Flash and 8 MB SDRAM, Preloaded with
protocol stack
using Internal Flash and RAM only, No software loaded
using Internal Flash and RAM only, Preloaded with protocol
stack
Development board for netRAPID 90** example
* planned
