NET LED Catalogue 2014 V4

pro

duct ca

talo

gue 2

014

V4

The Commercial

LED Lighting Specialist

Our Service, Our People, Your Choice

McDonald’s“The light quality in the kitchens is much better; the LED Tubes give a brighter, crisper light which the employees prefer working under compared with the fluorescents. The reduced electricity consumption is providing a payback in less than two years and with electricity price increases it was prudent to install the LED Tubes now.”

Eddie Leligdowicz, McDonald’s Franchisee

Bath NHS“This was an important project for the Hospital and the LED lights have been very well received. The road ways and car parks are much brighter, whilst at the same time we have more than halved our electricity consumption. The LED lights do not require any maintenance and are of extremely high quality.”

John Harris, Engineering Surveyor, Facilities. RUH

British Library“Unlike fluorescent tubes, the LED Tubes produce no UV light which would be damaging to the books”.

Patrick Dixon, Head of Building Services

clients’ comments...

The Commercial LED Lighting Specialist

Purchasing quality LED lighting products from suppliers that consistently deliver excellent results and value for money is tough in any market and the number of manufacturers is growing monthly. What’s important is finding suppliers that you can trust, with credibility and a track record of providing quality innovative products at competitive prices.

NET LED was established in 2009 and exclusively partners with manufacturers based in the UK and around the world that provide the best of the best! Manufacturers that deliver on every promise they make and offer real quality at competitive prices. We work closely with these partners and distribute a wide range of commercial LED products on their behalf.

However, we recognise the need for more than just great products and so strive to achieve excellence in customer experience, consumer value, employee talent, and consistent growth. This combination of quality products and outstanding customer service is our route to achieving our mission: “to be the premier manufacturers’ distributor of LED lighting products”.

We distribute primarily through resellers, including national electrical wholesalers, being a preferred supplier in many cases, and through hundreds of independent electrical wholesalers.

Operating from purpose-built offices and warehouse distribution facilities in Cambridge, we hold large stocks and distribute across the UK and Ireland. Our logistics team prides itself in care and accuracy when picking and packing your orders and works in conjunction with our strategic delivery partner, UPS, who provides a next-day pre-12 p.m. delivery.

Our supply chain and processes are all accredited to ISO 9001 and 14001 ensuring the highest standards for quality and environmental management. These quality standards are further endorsed as NET LED is an approved member of the Lighting Industry Association, which seeks to represent members that demonstrate the highest degree of professionalism, expertise and ethical standards.

Because building long term relationships with our customers is so important to us, we have client specific dedicated sales and support team members based all over the country. They provide a single point of contact to ensure you get exactly what you need when you want it.

We thank all our customers for their business to date and look forward to continuing to serve you as your commercial LED lighting specialist.

ISO 9001 : 2008 FS 590684

ISO 14001 : 2008 EMS 590685 C

As part of your distribution chain, we recognise the importance of providing outstanding customer service to you, so that you can do the same for your customers. We aim to provide

fast, professional and caring attention to your requirements at all times.

We stock and distribute a wide range of LED lighting solutions

Order by 3pm for pre-12pm

Next Day Delivery(Please allow up to 48 hours for Scotland)

E: [email protected] T: 01223 851505 F: 01223 851506

Our Service, Our People, Your Choice

D

Co

nte

nts

...

Features & Benefits of LED Lighting 67-68 Technical Glossary 69

LED Tubes T5

14-16

Pre-Wired Luminaires

20-23

LED Panel Lights

2-5

LED Downlights

24-26

LED Drivers

6-8

3 Hour Emergency Kits

34-36

LED Flood Lights

44-47

LED High Bays

48-50

LED Luminaires

10-13

Industrial LED Luminaires

52-54

Custom LED Products

56-59

LEDEmergency Lights

32-33

LED 2D Bulkheads

38-43

LEDLamps

28-30

LED Signage

60-62

Safety Signage

64-66

LED Tubes T8

17-18

E

Industry RecognitionIndustry professionals recognise the importance of Trade Association representation.

The Lighting Industry Association presents a host of benefits for members and is a seal of quality for affiliates.

NET LED is proud to be an approved member of the Lighting Industry Association, which seeks to represent members that demonstate the highest degree of professionalism, expertise and ethical standards.

Indust

ry R

eco

gnit

ion

1

Toppo was founded in 2009 and specialises in the development and manufacture of commercial LED lighting. Company accreditations include ISO 9001 for quality and ISO 14001 for environmental management. All products are independently accredited for CE & RoHS compliance with some products in the range also accredited by TUV and FCC.

NET LED has been working with Toppo since 2009 and is the exclusive UK distributor for the Toppo range of LED Panels, Tubes, Downlights, 2D Bulkheads and Luminaires. All Toppo products are designed to be long lasting replacements for traditional technology providing the equivalent light output at a fraction of the running cost.

Panels are available from stock in 4 standard sizes suitable for installation either into an existing ceiling grid, suspended on wires, or in a Surface Mount Box.

Applications: > Replaces fluorescent tubes > Retail and commercial applications > Architectural lighting > Suspended ceiling lighting for offices

Key Features: > High lumen output > 3 Hour Emergency Kits available > DALI controller available > 5 Year extended warranty

Product Features Include: > Up to 50% energy savings > Instant ON at full brightness > Last 3-5 times longer than fluorescent tubes > No glass - shatterproof polycarbonate > No phosphor, mercury, or lead > Easy installation > No flicker or hum > Maintenance free > No UV light emitted > Useful life expectancy > 50,000 hours

LED Panel Lightsby Toppo Lighting Co. Ltd.

Pan

el Lights

ISO 9001 : 2008 126927

ISO 14001 : 2004 126926

LED

Pan

el Ligh

ts

2

IES data files available.

495mm

495mm

13mm

Corner Profile

595mm

595mm

13mm

LED Panel 600x600mm

Power 40W

Input Voltage 100-240V AC

Power Factor >0.95

Luminous Flux 3200lm

Luminous Efficacy >80lm/W

Colour Temperature 4500K/5500K

Colour Rendering >80 CRI

Lamp Viewing Angle 115°

Dimmable Optional Upgrade

Operating Temp. -15 to +50°C

Housing/Cover Aluminium/PC

Dimensions 595x595x13mm

Fire Rating HB

IP Rating IP20

Weight 3.5kg

Part Number 4500K NET 11-03-01


LED Panel 500x500mm

Power 22W


Power Factor >0.95



Colour Temperature 4500K







Fire Rating HB

IP Rating IP20

Weight 2.0 kg


LED

Pan

el L

ights

3

1195mm

295mm

13mm

595mm

1195mm

13mm

LED Panel 1200x600mmPower 76W


Power Factor >0.95






Dimmable Not Available




Fire Rating HB

IP Rating IP20

Weight 6.9kg



LED Panel 1200x300mm

Power 40W


Power Factor >0.95










Fire Rating HB

IP Rating IP20

Weight 4.0g



LED

Pan

el Ligh

ts

4

3 Hour Panel Emergency Kit

Power 5W


Power Factor >0.90

Battery Current Limit 260mA

Output Voltage up to 45V

Battery Pack 3x4.5Ah D Ni-Cd 3.6V

Battery Cut-Off 3V

Recharge Period 24H

Hours Maintained >3H

Operating Temp. 0 to +50°C

Dimensions (excl. Battery) 235x35x52mm

Weight 900g

Part Number NET 19-33-03

Panel Light Surface Mount BoxSurface Mount boxes for LED Panels provide a slim option for mounting the LED Panels on a surface that has no void behind it. The void in the box provides sufficient space for the LED Panel driver and/or 3 Hour Emergency Kit to be concealed in the box.

The kits are of a fixed height, and come complete with screws and rawl plugs.

Part Number 600x600x50mm NET 11-03-39



Panel Light Suspension KitWire suspension kits for LED Panels provide various installation options by allowing them to be suspended from higher or angled ceilings with the LED driver located on top of the LED panel.

The kits are height-adjustable up to a maximum length of 1.5m, and come complete with screws and rawl plugs.

Part Number 4 Stud NET 11-03-31

Part Number 6 Stud NET 11-03-37

LED

Pan

el L

ights

5

Mean Well was established in 1982 specialising in the design and manufacture of switched power supplies distributed throughout the world via authorised distributors.

In response to the demands of intelligent LED lighting control and to provide a flexible power solution for project style lighting design, Mean Well developed a multiple-stage output current LED power supply LCM-40 with “constant current output” design. The output current level can be flexibly selected by the built-in DIP switch. The models are designed with “2-in-1” dimming function (0~10V DC and PWM signal), while the digital control model, LCM-40 DA, has a built-in DALI interface and push dimming function.

All products comply with certificates UL8750, ENEC EN61347-2-13, and EN62384 of lighting regulations. The LCM-40 also complies with IEC62386-101, 102, and 207 norms per DALI lighting control systems.

Key Features: > Use with 22W/40W Panel Lights only > Built-in protection for Short circuit/Over voltage/Over

temperature > Power Supply Synchronisation Operation:

Panels driven by LCM units (slaves) can be dimmed synchronously through an LCM unit (master) directly controlled via a 0-10V DC, 10V PWM, DALI or push dimming function. Maximum number of LCM units per circuit is 10 (1 master & 9 slaves) Maximum cable length between each unit is 20M

LED Driversby Mean Well

LED

Driv

ers

ISO 9001 : 2008 ID 091004832

ISO 14001 : 2004 ID 091004832

6

DALI Driver LED Panel (40W)

Power 42W


Power Factor >0.97

AC Current 0.23A/230V AC

Output Current 900mA

Output DC Voltage 2-45V

Enclosure IP20


Weight 240g

DALI Standards IEC62386-101,102,207


1-10V Dimming Driver (40w)

Power 42W


Power Factor >0.97

AC Current 0.23A/230V AC



Enclosure IP20


Weight 240g


1-10V Dimmer for Dimming Driver

Type 4A 2 way push switch

Colour White


Weight 100g

Dimming Standards 1-10V DC Grid Dimmer

Plate Compatibility MK (Logic and Grid Plus)

MEM Grid System

Wandsworth Grid System

Crabtree Grid System

Hamilton Grid System


LED

Dim

min

g D

rivers

by

7

Non-Dim Driver LED Panel 40W

Power 40W


Power Factor >0.95



Enclosure IP20


Weight 240g



Power 76W


Power Factor >0.95



Enclosure IP20


Weight 340g



Power 22W


Power Factor >0.95



Enclosure IP20


Weight 125g


LED

Driv

ers

8

Products Installed:

T8 1500mm LED Tubes T8 600mm LED Tubes

2012-2014

The Big Yellow Self Storage Company“Our decision to install LED lighting across our storage facilities has made a positive impact on Big Yellow’s energy plan.”

David Knight, Estates and Facilities Manager, Big Yellow

The Project

Big Yellow Self Storage Company Ltd. is a UK-based self-storage company providing solutions for homes and businesses. Operating out of 77 purpose-built storage facilities across the country, it offers spaces ranging from three feet to several thousand square feet.

Big Yellow works hard to create an environmentally friendly business and has achieved recognition as one of the best green companies in a 2011 Sunday Times list. It was also given a Queen’s Award for sustainable development in 2012.

As part of its continuous drive to reduce its carbon footprint, in 2011 Big Yellow started a programme to replace existing fluorescent light fittings with LED equivalents. An operation of this size called for a reliable company with a quality product that delivered excellent light output, significant electricity savings and a long maintenance-free life expectancy.

The Solution Before committing to a large-scale rollout, Big Yellow conducted monitored trials with several LED lighting manufacturers to find a good quality retrofit LED tube to replace its existing T8 fluorescent tubes. During this trial period, Big Yellow tested light output, energy consumption and appearance of several LED tubes within its storage facilities. After coming out top in these criteria, NET LED’s products were selected for installation across 8 Big Yellow stores in 2012.

Following the successful installations, and with significant enery savings already achieved, Big Yellow accelerated its installation programme and installed in excess of 20,000 LED tubes in a further 34 stores in 2013.

The Result

Since making the switch to LED, the company is now operating under high quality LED lighting while making substantial savings on its overheads.

By incorporating the LED tubes provided by NET LED, Big Yellow reduced energy costs incurred by lighting by 65%. In addition, the company has seen a significant saving on maintenance costs, as the LED lighting has a life expectancy of more than 50,000 working hours.

David Knight, Estates and Facilities Manager for Big Yellow, said: “Our decision to install LED lighting across our storage facilities has made a positive impact on Big Yellow’s energy plan. We’re saving money and meeting our energy saving targets with NET LED’s tubes.

Cas

e S

tudy

9

Toppo was founded in 2009 and specialises in the development and manufacture of commercial LED lighting. Company accreditations include ISO9001 for quality and ISO14001 for environmental management. All products are independently accredited for CE & RoHS compliance with some products in the range also accredited by TUV and FCC.


LED Grid Luminaires, LED NCF Luminaires, and LED Wall Packs are replacements for traditional fluorescent technology. LED Grid and NCF Luminaires are supported by a range of 3 Hour Liteplan Emergency Kits, which are available through NET LED.

Applications: > Replaces traditional technology > Retail and commercial applications > Architectural lighting > Offices & factories

Key Features: > High lumen output > Built-in driver > 3 Hour Emergency Kits available

Product Features Include: > Up to 70% energy savings > Instant ON at full brightness > Last 3-5 times longer than traditional lamps > No glass - shatterproof polycarbonate > No phosphor, mercury, or lead > Easy installation > No flicker or hum > Maintenance free > No UV light emitted > Useful life expectancy > 50,000 hours

LED Luminairesby Toppo Lighting Co. Ltd.

ISO 9001 : 2008 126927

ISO 14001 : 2004 126926

LED

Lum

inaire

s

10


3 Hour Grid Light Emergency Kit

Power 5W


Power Factor >0.90



Battery Pack 3x4.5Ah D Ni-Cd

Battery Cut-Off 3V

Recharge Period 24h




Weight 700g


LED Grid LuminairePower 36W


Power Factor >0.95





Dimmable No

Housing/Cover Aluminium


Weight 2.7kg


2ft LED NCF LuminairePower 25W


Power Factor >0.95





Dimmable No

Housing/Cover Polycarbonate

Retaining Clips Stainless Steel


Operating Temperature -15 to +50°C

Fire Rating V-0

IP Rating IP65

Weight 1.3kg


*Not compatible with 3 Hour NCF Luminaire Emergency Kit

LED

Lum

inai

res

11

3 Hour NCF Luminaire Emergency Kit

Power 5W


Power Factor >0.90




Battery Cut-Off 3V

Recharge Period 24h




Weight 940g


5ft LED NCF Luminaire

Power 45W/60W


Power Factor >0.95

Luminous Flux 4000lm/5200lm




Dimmable No





Fire Rating V-0

IP Rating IP65

Weight 2.9/3.0kg

Part Number 45W NET 11-11-05


4ft LED NCF LuminairePower 40W


Power Factor >0.95





Dimmable No





Fire Rating V-0

IP Rating IP65

Weight 2.4kg


LED

Lum

inaire

s

12

5ft No Gear NCF LuminaireHousing/Cover Polycarbonate




Fire Rating V-0

IP Rating IP65

Weight 2.3kg

For use with T8 5ft 3000K - NET 11-02-13

or T8 5ft 5500K - NET 11-02-04

Part Number (without tubes) NET 11-15-09

LED Wall Pack *Available from October 2014

Power 40W


Power Factor >0.95

LED Luminous Flux 4000lm





Dimmable No

Housing/Cover Die cast aluminium



IP Rating IP65

Weight 2.7kg


IP65 Cable Gland

Accessory for IP65 NCF Luminaire

Hole Size 20mm

Weight 10g


LED

Lum

inai

res

LED

Lum

inai

res

13

Applications: > Replaces T5, T8 & T12 fluorescent tubes > Retail & commercial applications > Architectural lighting > Backlighting for signage > Food industry & refrigeration

Key Features: > High lumen output > 3 Hour Emergency Kits available > Rotatable end caps > Internal drivers > 5 Year extended warranty

Product Features Include: > Up to 65% energy savings > Instant ON at full brightness > Lasts 3-5 times longer than fluorescent tubes > No glass - shatterproof polycarbonate > No phosphor, mercury, or lead > Easy installation > No flicker or hum > Maintenance free > No UV light emitted > Useful life expectancy > 50,000 hours

Toppo was founded in 2009 and specialises in the development and manufacture of commercial LED Lighting. Company accreditations include ISO9001 for quality and ISO14001 for environmental management. All products are independently accredited for CE & RoHS compliance with some products in the range also accredited to TUV and FCC standards.


LED Tubes are available in both T5 (1ft – 5ft) and T8 (2ft – 6ft) versions. All products are also supported by a range of Liteplan 3 Hour Emergency Kits, which are available through NET LED.

LED Tubes T5/T8by Toppo Lighting Co. Ltd.

T5/T

8 L

ED

Tubes

LED

Tubes T

5/T

8

ISO 9001 : 2008 126927

ISO 14001 : 2004 126926

Rotatable End Caps for easy installation

14

Lighting Distribution Curve




T5 288mm (1ft) 5500K LED Tube

Power 6W


Power Factor >0.9

Luminous Flux 500lm

Luminous Efficacy >80/W




Dimmable No



End Cap Style G5

Fire Rating V-0

IP Rating IP20

Weight 120g



Power 10W


Power Factor >0.9

Luminous Flux 900lm





Dimmable No



End Cap Style G5

Fire Rating V-0

IP Rating IP20

Weight 180g



Power 12W


Power Factor >0.90






Dimmable No



End Cap Style G5

Fire Rating V-0

IP Rating IP20

Weight 240g


LED

Tubes

T5

15



3 Hour Tube Emergency Kit

Power 5W


Power Factor >0.90




Battery Cut-Off 3V

Recharge Period 24h




Weight 700g



Power 15W


Power Factor >0.95






Dimmable No



End Cap Style G5

Fire Rating V-0

IP Rating IP20

Weight 320g



Power 20W


Power Factor >0.95






Dimmable No



End Cap Style G5

Fire Rating V-0

IP Rating IP20

Weight 400g


LED

Tubes T

5

16





T8 900mm (3ft) LED Tube

Power 12W


Power Factor >0.9






Dimmable No



End Cap Style G13

Fire Rating V-0

IP Rating IP20

Weight 300g



Power 18W


Power Factor >0.95






Dimmable No



End Cap Style G13

Fire Rating V-0

IP Rating IP20

Weight 380g




Power 10W


Power Factor >0.9






Dimmable No



End Cap Style G13

Fire Rating V-0

IP Rating IP20

Weight 200g


LED

Tubes

T8

17




Power 5W


Power Factor >0.90




Battery Cut-Off 3V

Recharge Period 24h




Weight 700g



Power 22W


Power Factor >0.95






Dimmable No



End Cap Style G13

Fire Rating V-0

IP Rating IP20

Weight 550g




Power 32W


Power Factor >0.95






Dimmable No



End Cap Style G13

Fire Rating V-0

IP Rating IP20

Weight 600g



LED

Tubes T

8

18

The Project

At the heart of The British Library in London, a tall glass tower - the King’s Library Tower - houses books collected by King George III (reigned 1760-1820). It is considered one of the most significant collections of the Enlightenment, containing books printed mainly in Britain, Europe and North America from the mid 15th to the early 19th centuries, with 65,000 volumes of printed books, and 19,000 pamphlets. The collection’s home is the six-storey King’s Library Tower, designed specifically for the purpose. The books are on view to visitors behind UV-filter glass which, together with the environmental control system, helps maintain appropriate light, temperature and humidity levels.

The Solution After a technical evaluation, NET LED’s Tubes were chosen for lighting this precious collection. Using the latest solid-state, surface-mount LED technology, 1800mm (6ft) LED Tubes, could achieve the precise colour temperature and lighting levels whilst reducing the power consumption by over 60%. Additional savings are also achieved in running the environmental control system as the heat output of an LED Tube is significantly less than that of a fluorescent.

The Result

Commenting on the installation of the LED Tubes, Patrick Dixon, Head of Building Services at The British Library said: “Unlike fluorescent tubes, the LED Tubes produce no UV light which would be damaging to the books. They also use only a third of the electricity of fluorescents and last over three times longer, providing significant environmental and financial benefits for the Library.” As well as being widely used for lighting in offices, factories, hospitals and retail outlets, LED Tubes provide an ideal lighting solution for museums and galleries as they do not emit any UV light, and they are available in a range of colour temperatures with reliable colour rendering. They only use a third of the electricity of equivalent fluorescents which also has the benefit of reduced heat output when lighting valuable collections.

Products Installed:

T8 1800mm LED Tubes September 2011

The King’s Library Tower“Unlike fluorescent tubes, LED tubes produce no UV light which would be damaging to the books.”

Patrick Dixon, Head of Building Services, British Library

Qual

ity

19

Fitzgerald was founded in 2009 and manufactures a range of quality luminaires that meet the requirements of BS/EN60598, and are CE marked.

The company has a flexible team with many decades of lighting experience between them, and is proud to manufacture in the UK.

NET LED has been working with Fitzgerald since 2012 and is an approved distributor for its range of luminaires which have been prewired ready for the installation of LED Tubes or emergency packs that are distributed by NET.

The range includes Battens, Cat2 and NCF style Luminaires.

All Luminaires are supplied without LED Tubes.

Applications: > Commercial, industrial & leisure > Schools, hospitals & sports facilities > Offices > Warehouses & factories

Key Features: > Compatible with T5/T8 LED Tubes > Compatible with 3 Hour Emergency Kits > Meets BS/EN60-598

Product Features Include (with LED Tubes): > Up to 65% energy savings > Instant ON at full brightness > Last 3-5 times longer than fluorescent tubes > No glass - shatterproof polycarbonate > No phosphor, mercury, or lead > Easy installation > No flicker or hum > Maintenance free > No UV light emitted

Pre-Wired Luminairesby Fitzgerald Lighting

t8 L

eD

tu

bes

Pre-w

ired Lum

inaires

20

T5 Single/Twin Batten (Exc. Tube)

Length 1449mm/1449mm

Width 59mm/105mm

Depth 93mm/93mm

Weight 1.5kg/2.0kg

Part Number Single 1449mm NET 27-13-01

Part Number Twin 1449mm NET 27-13-03

T8 Single Batten (Exc. Tube)

Length 1221mm/1521mm/1784mm

Width 59mm/59mm/59mm

Depth 93mm/93mm/93mm

Weight 1.5kg/1.9kg/2.3kg

Part Number 1200mm NET 27-13-05



T8 Twin Batten (Exc. Tube)








Diffusers for Battens

T8 SB Diffuser for 1200mm NET 27-13-07T8 SB Diffuser for 1500mm NET 27-13-11T8 SB Diffuser for 1800mm NET 27-13-15T8 TB Diffuser for 1200mm NET 27-13-27T8 TB Diffuser for 1500mm NET 27-13-19T8 TB Diffuser for 1800mm NET 27-13-23

Pre

-wired

Lum

inai

res

21

T8 Twin Cat2 Luminaire (Exc. Tube)

Length 1221mm/1521mm

Width 105mm/105mm

Depth 91mm/91mm

Weight 2.0kg/2.1kg



T8 Tri Cat2 Luminaire (Exc. Tube)

Length 595mm

Width 595mm

Depth 86mm

Weight 4.0kg


T8 Quad Cat2 Luminaire (Exc. Tube)

Length 595mm

Width 595mm

Depth 86mm

Weight 4.0kg


Pre-w

ired Lum

inaires

22

T5 IP65 Luminaire (Exc. Tube)Length 1577mm/1577mm

Width 90mm/116mm

Depth 95mm/99mm

Weight 3.8kg/5.8kg

Part Number Single 1449mm NET 27-15-15

Part Number Twin 1449mm NET 27-15-17

T8 IP65 Single Luminaire (Exc. Tube)




Weight 2.8kg/3,8kg/4.1kg




T8 IP65 Twin Luminaire (Exc. Tube)








Stainless Steel Clips

T8 1200 Requires 8 clips



Part Number (each) NET 27-15-13

*Complete LED NCF Luminaires available on pages 10-13

Pre

-wired

Lum

inai

res

23

Toppo specialises in the development and manufacture of commercial LED Lighting. Company accreditations include ISO9001 for quality, and ISO14001 for environmental management. All products are independently accredited for CE & RoHS compliance with some products in the range also accredited by TUV and FCC.


LED Downlights are equivalents for traditional single and twin PLL fittings. All Downlights are supported by a range of 3 Hour Liteplan Emergency Kits which are available through NET LED.

Applications: > Replaces CFL/PLL lamps > Retail and commercial applications > Architectural lighting > Indoor lighting

Key Features: > High lumen output > 3 Hour Emergency Kits available > Polycarbonate cover for diffusion > 5 Year extended warranty

Product Features Include: > Up to 60% energy savings > Instant ON at full brightness > Last 3-5 times longer than fluorescent fittings > No glass - shatterproof polycarbonate > No phosphor, mercury, or lead > Easy installation > No flicker or hum > Maintenance free > No UV light emitted > Useful life expectancy > 50,000 hours

LED Downlightsby Toppo Lighting Co. Ltd.

LED D

ow

nligh

ts

ISO 9001 : 2008 126927

ISO 14001 : 2004 126926

LED

Dow

nligh

ts

24




4” LED Downlight 4500K

Power 8W


Power Factor >0.9

Luminous Flux 750lm





Dimmable No



Dimensions 140x74mm

Mounting Hole 120-125mm

Fire Rating V-0

IP Rating IP20

Weight 0.5kg



Power 18W


Power Factor >0.95






Dimmable No



Dimensions 190x80mm


Fire Rating V-0

IP Rating IP20

Weight 0.75kg


LED

Dow

nligh

ts

25

3 Hour Downlight Emergency Kit

Power 5W


Power Factor >0.90




Battery Cut-Off 3V

Recharge Period 24h




Weight 700g


Packaged for display purposes

Our 4”, 6” and 8” LED Downlights are delivered in robust, eye-catching packaging that looks great on the counter.



Power 22W


Power Factor >0.95






Dimmable No



Dimensions 230x86mm


Fire Rating V-0

IP Rating IP20

Weight 1.0kg


LED

Dow

nligh

ts

26

Qual

ity

QualityQuality is important when selecting an LED lighting solution that works for you. For this reason, we ensure every manufacturer we work with is quality certified by an independent body.

We too adhere to British Standards Institution (BSI) codes of practice and hold ISO 9001 accreditation. This addresses various aspects of quality management geared towards consistent improvement. We aim to ensure that the products and the sales and distribution services we provide meet the high standards we promise.

27

Applications: > Retail and commercial applications > Office application > Architectural lighting

Key Features: > A number of base options available to suit most

standard bases > 3 year warranty > Energy saving

Product Features Include: > Up to 70% energy savings > Instant ON at full brightness > Last 3-5 times longer than traditional lamps > No glass - shatterproof polycarbonate > No phosphor, mercury, or lead > Easy installation > No flicker or hum > Maintenance free > No UV light emitted > Useful life expectancy > 25,000 hours

LED

Lam

ps

LED Lampsby BANQ Tech Company Ltd.

Founded in 2002, BANQ specialises in the development and manufacture of quality commercial LED lighting. As a company they are accredited to ISO 9001 for quality. All LED Lamps are CE, RoHS and TUV certified.

LED Lamps are low energy replacements for incandescent and CFL lamps, providing equivalent light output at a fraction of the running cost. They are available in two styles, with different base options to suit a range of luminaires.

NET LED has been working with BANQ since 2013 and is an approved UK distributor for BANQ’s range of LED Lamps.

The Lamps are available from stock in Candle and GLS versions, with SES, BC and SBC bases.

28

Candle Lamp SES / E14 Base

Power 4.5W


Luminous Flux 350lm

Colour Temperature 2700-3200K



Dimmable No

Instant ON <1s

Dimensions 38x112mm

Base SES / E14


Candle Lamp SBC / B15 Base

Power 4.5W


Luminous Flux 350lm




Dimmable No

Instant ON <1s

Dimensions 38x112mm

Base SBC / B15


Candle Lamp BC / B22 Base

Power 4.5W


Power Factor >0.95

Luminous Flux 350lm




Dimmable No

Instant ON <1s

Dimensions 38x112mm

Base BC / B22


LED

Lam

ps

29

GLS Lamp ES / E27 Base

Power 7W


Luminous Flux 560lm




Dimmable No

Instant ON <1s

Dimensions 60x109mm

Base ES / E27


GLS Lamp BC / B22 Base

Power 7W


Luminous Flux 560lm




Dimmable No

Instant ON <1s

Dimensions 60x109mm

Base BC / B22



Our LED Lamps are delivered in eye-catching packaging that looks great on your counter.

LED

Lam

ps

30

Products Installed:

T8 1500mm LED Tubes

March 2011

The Project

One of the UK’s largest independent McDonald’s franchise groups is owned by Mr Eddie Leligdowicz and includes ten restaurants spanning the three counties of Derbyshire, Staffordshire and Cheshire. The restaurants turn over around £24 million per annum, serving tens of thousands of customers per day. Mr Leligdowicz is committed to energy saving technologies to improve efficiency in his restaurants; these include the installation of NET LED Lighting in the kitchens at McDonald’s Markeaton Park in Derbyshire.

The Solution

The kitchen has 19 light fittings. Before LED Lighting was installed, each fitting had two 5ft 58W fluorescent tubes and ballasts, so the total wattage was approximately 125W per fitting. The fluorescent tubes were replaced with 5ft LED Tubes running at 22W each with no ballast required, so each fitting now runs at only 44W, a saving of 65% in electricity consumption. Furthermore, the life expectancy of the LED Tube is over 3 times that of the fluorescents, making further savings in maintenance costs and waste disposal. These savings are expected to give a payback in under two years.

The Result

In addition to the 38 LED Tubes in the main kitchen, an additional 32 LED Tubes are being used in other parts of the restaurant, including the store room, cold room, corridors and office. Mr Eddie Leligdowicz, McDonald’s Franchisee, is delighted with the electricity savings and the reduced maintenance provided by the LED Tubes meaning he won’t need to replace them for around 6 years. This is consistent with other social responsibility initiatives the restaurant group is undertaking to reduce waste and lower its carbon footprint.As well as the significant cost savings, LED Tubes provide ideal lighting for kitchens and food processing environments as they contain no glass, thereby reducing a potential health and safety hazard from broken lamps. LED Tubes are very robust, being made from aluminium with a strong polycarbonate cover, and they do not contain any of the toxic chemicals such as phosphor, mercury or lead which are found in fluorescent lamps.

McDonald’s RestaurantMarkeaton Park, Derbyshire

“The light quality in the kitchen is much better; the LED tubes give a brighter, crisper light which the employees prefer working under compared to the fluorescents.”

Eddie Leligdowicz, McDonald’s Franchisee

Cas

e S

tudy

31

LED Emergency Lightsby Liteplan Emergency Lighting

Liteplan Ltd is a private UK company formed in 1994, specialising in the design and manufacture of a wide range of emergency lighting, including a comprehensive variety of LED kits and devices.

The company concentrates on the promotion of its products via OEM customers of which NET LED is one.

All Liteplan dedicated emergency downlights are fully automatic self-testing Maintained or Non-Maintained high intensity white LED luminaires. They are manufactured from flame retardant ABS. Edison EDW LEDs provide a high brightness light source and the light output distribution is optimised by bespoke lenses for effective illumination of specific area types.

Area types supported include: > Specific locations - Where particular locations and

hazards need emergency illumination (Spot)

> Escape Routes - Bespoke lenses are used to control the light distribution to ensure optimum emergency lighting luminance along escape routes (Narrow Beam)

> Open Area - For open areas in which there are no defined escape routes (Wide Beam)

Product Features Include: > Instant ON at full brightness > Last 3-5 times longer than traditional lamps > No glass - shatterproof polycarbonate > No phosphor, mercury, or lead

Easy installation > No flicker or hum > Maintenance free > No UV light emitted > Useful life expectancy > 35,000 hours

ISO 9001 : 2008 GB13846

xxxx

LED

Em

erge

ncy

Ligh

ts

32


Specific Location Emergency

Power 3W

Input Voltage 230V +/-10%

Power Rating 700mA


Luminous Flux 114lm

Battery Hi Temp Rechardable NiCD

Recharge Period 24h

Self Test Programme Yes

Mounting Recessed

Degree of Protection IP30

Dimensions 50mm Diameter

Lamp Weight 61g


Escape Route Emergency

Power 3W


Power Rating 700mA


Luminous Flux 114lm


Recharge Period 24h


Mounting Recessed



Lamp Weight 61g


Open Areas Emergency

Power 3W


Power Rating 700mA


Luminous Flux 114lm


Recharge Period 24h


Mounting Recessed



Lamp Weight 61g


LED

Em

erg

ency

Lig

hts

33

Liteplan Ltd is a private UK company formed in 1994, specialising in the design and manufacture of a wide range of emergency lighting conversion kits, including a comprehensive variety of LED kits and devices.

The company concentrates on the promotion of its products via OEM customers of which NET LED is one.

All Liteplan conversion kits have been designed to be fully compatible with the NET LED range of products, and manufactured to conform to the relevant emergency lighting product standard BS EN 61347-2-7.

Liteplan’s experienced engineers provide a skilled technical support service.

The modules and battery packs supplied are fully guaranteed.

3 Hour Emergency Kitsby Liteplan Emergency Lighting

ISO 9001 : 2008 GB13846

Range of Emergency Kits are available to support: > LED Panel Lights > T5 LED Tubes > T8 LED Tubes > LED NCF Luminaires > LED Grid Luminaires > LED Downlights

Key features: A key feature of the kits supplied is their ability to

automatically adjust the output LED current so as to provide the best match between the battery and the LED load, providing maximum illumination whilst ensuring full battery duration.

3H

Em

erge

ncy

Kits

34


3 Hour Downlight Emergency Kit

Power 5W


Power Factor >0.90




Battery Cut-Off 3V

Recharge Period 24H




Weight 900g


3 Hour Panel Emergency Kit

Power 5W


Power Factor >0.90




Battery Cut-Off 3V

Recharge Period 24H




Weight 900g



Power 5W


Power Factor >0.90




Battery Cut-Off 3V

Recharge Period 24h




Weight 700g


3H

Em

erg

ency

Kit

s

35

3 Hour Grid Light Emergency Kit

Power 5W


Power Factor >0.90




Battery Cut-Off 3V

Recharge Period 24H




Weight 900g


3 Hour NCF Luminaire Emergency Kit

Power 5W


Power Factor >0.90




Battery Cut-Off 3V

Recharge Period 24h




Weight 940g


2D Bulkheads

2D Bulkheads come in robust IP54 housing, and are available with 0% & 10% microwave sensors.

Page 38-43Safety Signage

A large range of safety signage is available, for public awareness of potentially dangerous areas.

Page 64-66Emergency Lighting

Emergency Lights are designed to highlight designated escape routes in emergency situations.

Page 32-33

Related Products

3H

Em

erge

ncy

Kits

36

Products Installed:

T8 600mm LED tubes April 2010 - September 2011

The Project

Hertfordshire Constabulary’s policing style and organisation is designed to provide a modern, flexible force and an effective policing service for Hertfordshire. Consistent with these objectives is the desire to be environmentally responsible, so during 2010 and 2011 Herts Constabulary installed hundreds of 2ft LED Tubes in place of the old fluorescents.

The Solution

During 2010, 802 2ft LED Tubes running at 8W were installed in police premises. These replaced 18W fluorescents strip lights. The LED Tubes do not require starters or ballasts (which also consume power) thereby making additional energy savings and removing components which would otherwise require ongoing maintenance.

The Result The savings in electricity consumption achieved are over 60%, giving a corresponding carbon dioxide reduction. Furthermore, the LED Tubes last over three times longer than the fluorescents, saving Herts Constabulary lamp replacement maintenance costs. The longer life of the LED Tubes also means less actual waste disposal of failed tubes, starters and ballasts, which has significant environmental benefits as fluorescents contain the toxic chemicals phosphor, mercury and lead, as well as being made of glass.

The Company

NET LED Lighting specialises exclusively in the supply of LED lighting. LED Tubes are energy efficient, long lasting and environmentally friendly replacements for widely used fluorescent tubes. They contain no glass, phosphor, mercury or lead, all typically found in fluorescent tubes. Furthermore, no ultra violet (UV) light is produced, and the light does not flicker or hum. All NET LED Lighting products utilise the latest solid-state, surface-mount LED technology providing a stable performance with prolonged reliability. They are covered by a 3 year guarantee, meet CE and RoHS standards, and are manufactured under an ISO accreditation.

Hertfordshire Constabulary

“We installed over 800 LED tubes in police premises during 2010 and 2011. As well as seeing a reduction in electricity consumption of over 60%, the LED tubes have been virtually maintenance free.”

Mike Carvell, Building Services Manager, Hertfordshire Constabulary

Cas

e S

tudy

37

Toppo specialises in the development and manufacture of commercial LED Lighting. Company accreditations include ISO9001 for quality, and ISO14001 for environmental management. All products are independently accredited for CE & RoHS compliance with some products in the range also accredited by TUV and FCC.


Additional features include the option of microwave sensors and an emergency function.

Applications: > Replaces fluorescent 2D tubes > Retail and commercial applications > Architectural lighting

Key Features: > High lumen output > 3 Hour Emergency option > Microwave Sensor option > 3 Year warranty

Product Features Include: > Up to 60% energy savings > Instant ON at full brightness > Last 3-5 times longer than traditional lamps > No glass - shatterproof polycarbonate > No phosphor, mercury, or lead

Easy installation > No flicker or hum > Maintenance free > No UV light emitted > Useful life expectancy > 35,000 hours

LED 2D Bulkheadsby Toppo Lighting Co. Ltd.

ISO 9001 : 2008 126927

ISO 14001 : 2004 126926

xxxx

LED

2D

Bulk

head

s

38


IP54 10% MS Bulkhead 4500K

Power 16W


Power Factor >0.95

LED Luminous Flux 1700lm (EM 1700/150lm)






Dimmable No

Standby Mode 10% Output



Fire Rating V-0

Dimensions 327diax110mm

Weight 1.5/1.7kg

Part Number MS NET 11-06-21

Part Number MS + 3H EMG NET 11-06-27

IP54 Bulkhead 4500K

Power 16W


Power Factor >0.95







Dimmable No



Fire Rating V-0


Weight 1.1/1.3kg

Part Number Standard NET 11-06-17

Part Number 3H EMG NET 11-06-19

LED

2D

Bulk

head

s

39



Our LED 2D Bulkheads and LED Gear Trays are delivered in robust, eye-catching packaging that looks great on display.


Power 16W


Power Factor >0.95







Dimmable No




Fire Rating V-0


Weight 1.5/1.7kg



2D IP54 BHD Chrome Ring

Accessory for IP54 2D Bulkhead

Weight 180g


LED

2D

Bulk

head

s

40


IP65 Bulkhead 4500K

Power 16W


Power Factor >0.95







Dimmable No



Fire Rating V-0


Weight 3.1/3.3kg


IP65 Emergency Bulkhead 4500K

Power 16W


Power Factor >0.95







Dimmable No



Fire Rating V-0


Weight 3.1/3.5kg


LED

2D

Bulk

head

s

41


Our LED 2D Bulkheads and LED Gear Trays are delivered in robust, eye-catching packaging that looks great on display.



Power 16W


Power Factor >0.95







Dimmable No




Fire Rating V-0


Weight 3.3/3.5kg



2D IP65 BHD Half Moon Cover

Accessory for IP65 2D Bulkhead

Weight 820g


LED

2D

Bulk

head

s

42


0% MS Bulkhead Gear Tray 4500K

Power 16W


Power Factor >0.95






Dimmable No

Standby Mode 0%



Weight 440/620g

Part Number 0% MS NET 11-06-45

Part Number 0% MS + 3H EMG NET 11-06-47

Bulkhead Gear Tray 4500K

Power 16W


Power Factor >0.95



Luminous Efficacy 100>lm/W




Dimmable No



Weight 360/540G


Part Number 3H EMG NET 11-06-13

10% MS Bulkhead Gear Tray 4500K

Power 16W


Power Factor >0.95







Dimmable No

Standby Mode 10%



Weight 440/620g

Part Number 10% MS NET 11-06-15

Part Number 10% MS + 3H EMG NET 11-06-29

LED

2D

Bulk

head

s

43

Leyond was founded in 2005 as a wholly owned subsidiary of Liyang Electronic Ltd. It is a high tech enterprise that specialises in developing and producing eco-friendly high power LED lighting. Accreditations include ISO9001 for quality and ISO14001 for environmental management. All products are independently accredited to CE & RoHS compliance, with some products in the range also accredited by TUV and FCC.

NET LED has been working with Leyond since 2011 and is the exclusive UK distributor for the Leyond range of High Power LED Flood Lights and LED High Bay Lamps. All products incorporate internal drivers and are designed to be long lasting replacements for traditional sodium or metal halide lamps, whilst providing equivalent levels of light output at a fraction of the running cost.

High Power LED Flood lights are available in 30W, 50W, 80W, 100W, 150W, 200W and 250W versions and can be used as a traditional flood or as a low bay fitting.

Applications: > Replaces high pressure sodium floods > Retail and commercial applications > Architectural lighting > Security lighting > Car parks

Key Features: > High lumen output > Operates in wide temperature range > Anti-corrosive IP65 housing > 5 Year extended warranty

Product Features Include: > Up to 70% energy savings > Instant ON at full brightness > No phosphor, mercury, or lead > Easy installation > No flicker or hum > Maintenance free > No UV light emitted > Useful life expectancy > 50,000 hours

LED Flood Lightsby Leyond Lighting Co. Ltd.

ISO 9001 : 2008 111112038

LED

Flo

od L

ights

44





80W LED Flood Light 6000K

Power 80W


Power Factor >0.90



LED Luminous Efficacy >110lm/W

LED Chip Bridgelux



Lamp Viewing Angle Typ. 95°

Dimmable No


Housing/Cover Aluminium/Glass


Weight 5.26kg



Power 50W


Power Factor >0.90



LED Luminous Effficacy >110lm/W

LED Chip Epistar




Dimmable No




Weight 2.84kg



Power 30W


Power Factor >0.90




LED Chip Epistar




Dimmable No




Weight 1.9kg


LED

Flo

od L

ights

45





Power 200W


Power Factor >0.90




LED Chip Bridgelux




Dimmable No




Weight 10.36kg



Power 150W


Power Factor >0.90




LED Chip Bridgelux




Dimmable No




Weight 9.82kg



Power 100W


Power Factor >0.90




LED Chip Bridgelux




Dimmable No




Weight 8.24kg


LED

Flo

od L

ights

46




Our 30W, 50W and 80W LED Flood Lights are delivered in robust, eye-catching packaging that looks great on display.


Power 250W


Power Factor >0.90




LED Chip Bridgelux




Dimmable No




Weight 11.36kg


LED

Flo

od L

ights

47

Leyond was founded in 2005 as a wholly owned subsidiary of Liyang Electronic Ltd. It is a high tech enterprise that specialises in developing and producing eco-friendly high power LED lighting. Accreditations include ISO9001 for quality and ISO14001 for environmental management. All products are also independently accredited for CE & RoHS compliance, with some products in the range accredited by TUV and FCC.

NET LED has been working with Leyond since 2011 and are the exclusive UK distributor for the Leyond range of High Power LED High Bay Lamps and LED Flood Lights. All products incorporate internal drivers and are designed to be long lasting replacements for traditional sodium or metal halide lamps, whilst providing equivalent levels of light output at a fraction of the running cost.

High Power LED High Bays are available in 100W, 150W and 200W versions.

Applications: > Replaces traditional metal halide high bay > Warehouse applications > Security lighting

Key Features: > High lumen output > Built-in driver > 5 Year extended warranty


LED High Baysby Leyond Lighting Co. Ltd.

ISO 9001 : 2008 111112038

xxxx

LED

High

Bays

48


LED High Bay 100W

Power 100W


Power Factor >0.9




LED Chip CREE




Dimmable No


Operating Humidity 10%-90% RH

Housing IP41

Weight 5.5kg


LED High Bay 150W

Power 150W


Power Factor >0.9




LED Chip CREE




Dimmable No



Housing IP41

Weight 6.5kg


100W & 150W

LED

Hig

h B

ays

49

LED High Bay 200W

Power 200W


Power Factor >0.9




LED Chip CREE



Beam Viewing Angle 60°

Dimmable No



Housing IP41

Weight 7.5kg


200W

Safety Signage

A large range of safety signage is available, for public awareness of potentially dangerous areas.

Page 64-66LED NCF Luminaires

LED NCF Luminaires are equivalents for traditional single and twin fluorescent NCF fittings.

Page 10-13

Related Products

LED Flood Lights

LED Flood Lights are High Power replacements for sodium and metal halide floods. Up to 250W.

Page 44-47

LED

High

Bays

50

Products Installed:

T8 LED 600mm Tubes T8 LED 1500mm Tubes 80W LED Floodlights

May 2013

The Project

Red Funnel is an integrated transport, travel and leisure company employing some 400 people in Southampton and on the Isle of Wight. Operating the largest ferry service to and from the island, Red Funnel carries over 3 million passengers each year. The company historically incorporated fluorescent tubes in the passenger loading bays of its ferries and metal halide floodlights on deck and on their jetties. As part of their commitment to reducing energy and maintenance costs, Red Funnel chose NET LED Lighting for its solution.

The Solution Because of the nature of Red Funnel’s operations certain areas are in constant use and therefore require quality, reliable lighting at all times. The internal drivers and long life expectancy (50,000 working hours) of the LED lighting provide this reliability, as well as massively reduced maintenance costs normally associated with large-scale lighting operations. The LED Floodlights have weather-proof IP65 housing that are perfect for use on the waves.Opting for 5ft LED Tubes in the gangways on ferries, 2ft LED Tubes in the car decks, and high power LED Floodlights on its jetties, Red Funnel is seeing 65% savings on their energy and maintenance costs. LED Tubes are designed with rotatable end caps allowing for quick and easy installation.

The Result

By incorporating LED Tubes and Floodlights into its energy plan, Red Funnel achieved high-power light output at a fraction of its historical energy spend. The company is been delighted with the results of its LED fit-out and the savings they’ve already started to see. Roy Pavett, Electrical Supervisor for Red Funnel, said: “As a company providing an essential service, we need to ensure our lighting is reliable whilst making a conscious effort to reduce our energy spend and carbon footprint. Installing the LED Tubes and Floodlights provided by NET LED has helped us achieve this.”

Red Funnel Ferries

“Installing the LED Tubes and Floodlights from NET LED

has helped us improve our energy-efficiency quickly and

easily, and dramatically reduced our maintenance costs.”

Roy Pavett, Electrical Supervisor, Red Funnel

xxxx

Cas

e S

tudy

51

Industrial L

ED

Lum

inaire

s

Industrial LED Luminairesby SCHUCH

SCHUCH has been manufacturing luminaires that operate in extreme conditions for more than a century. Today, their range of explosion protected light fittings are considered industry leading products for heavy industrial applications. Products receive a QS certificate accredited to ISO 9001 and are tested vigorously to pass regular audits. The company’s professional disposal procedures are compliant with WEEE and RoHS guidelines.

NET LED offers the full range of SCHUCH products, including explosion protected light fittings for Zones 1/21, 2/22, and for mining applications. They provide high luminous flux under a range of extreme environmental conditions.

Presented overleaf is a small selection of SCHUCH’s products. As a custom OEM product, they are available through NET LED in quantity on a 6-8 week lead time. To view the full range, including our 300-page SCHUCH catalogue, contact NET LED.

Applications: > Zone 1/21 > Zone 2/22 > Mining applications > Oil rigs > Heavy industrial applications

Key Features (may not apply to full range): > Explosion-proof or explosion protected > High chemical resistance > Weather, water and dust resistant > Operates in wide temperature range

Product Features Include: > Up to 50% energy savings > Instant ON at full brightness > Easy installation > No flicker or hum > Maintenance free > No UV light emitted > Useful life expectancy > 35,000 hours

52

Explosion-Proof LED Flood Light

Power 48-135W



Colour Temperature Typ. 5000K

Operating Temp. -50°C to +60°C

Hazard Locations Zones 1, 2 and 21, 22

Swivel Range +/- 90°

Resistance Against vibrations and shakings



Weight 16.8kg

Contact us for more information

Explosion-Protected LED Fitting

Power 36-58W

Input Voltage 230V AC




Hazard Locations Zones 2 and 22

Resistance Excess temperature protection

Housing/Cover Glass fibre reinforeced polyester


Weight Not availble at time of print


Comin

g So

on

Compact Explosion-Protected Emergency

Power 100W






Resistance Vibrations and shakings

Housing/Cover Aluminium and Polycarbonate

Dimensions 320x161x71,,

Weight 0.9kg


Indust

rial

LED

Lum

inai

res

53

Explosion-Protected LED Series nD8301/2Power 134-268W






Resistance Excess temperature protection

Housing/Cover Die cast aluminium

Dimensions 760x420x86mm/549x420x86mm

Weight 14.4kg/9.2kg


LED Floodlight Series nD8800Power 134-268W






Swivel Range 180°

Resistance Gas- and dust-hazardous areas

Housing/Cover Aluminium and glass


Weight 14.5kg/16kg


Comin

g So

on

Presented here is a small selection of SCHUCH’s extensive range of Zones 1 & 2 products for heavy industrial applications. To view the full range, please contact your regional Sales Manager or NET LED Lighting on 01223 851505.

Please Note:

Industrial L

ED

Lum

inaire

s

54

Reigate & Banstead Borough CouncilBancroft Road Car Park

“We achieved a payback in around 2 years, equating to a saving in annual electricity costs of £13,490 per annum, a reduction in our carbon footprint of 67 tonnes CO2 and greatly improved the lighting effect in these public areas.”

Raymond Dill, Environmental Initiatives Officer Reigate & Banstead Borough Council

The Project

Bancroft Road car park has 5 floors and contained 350 standard fluorescent tubes of various sizes (6ft @ 72W and 5ft @ 59W including ballasts). The annual power consumption for the site was 229,959 kW at a cost of £26,444 per annum. With the aid of Salix funding an energy saving solution needed to be implemented.

The Solution

Following a successful trial of NET LED’s Tubes a complete refit of the car park lighting was undertaken replacing all 350 tubes. The 6ft 72W fluorescents were replaced with LED Tubes consuming only 22W and the 5ft 59W fluorescents with 18W LED Tubes. The work was undertaken by DH Croft Ltd.

The Result

The end result not only provided a far better level of lighting, as can be clearly seen in the 2 photos, but more importantly, following detailed power consumption monitoring before and after the installation, the annual savings are calculated at £13,390. This equates to a carbon footprint reduction of 67 tonnes CO2. In addition to these savings, the ongoing maintenance costs will also be greatly reduced as the expected life of the new LED Tubes is in excess of 50,000 hours (11 years assuming 12 hours usage per day).

Products Installed:

T8 1500mm LED Tubes T8 1800mm LED Tubes

January 2010

Fluorescent Lighting

LED Lighting

Indust

rial

LED

Lum

inai

res

55

Custom LED Productsby NEXOL Lighting Co.

NEXOL was founded in 2010 by a group of lighting industry professionals who shared a vision of high-quality concept luminaires that featured energy-saving LED lighting. The products are CE and RoHS certified, and comply with TUV standards.

These custom OEM products are designed for commercial applications that value high concept design. They are long lasting replacements for traditional light fittings, providing equivalent levels of light output at a fraction of the running cost.

Presented overleaf is a selection of NEXOL’s range of LED products. These are custom OEM products that are available through NET LED in quantity with a 6-8 week lead time. For more information and to acquire our NEXOL catalogue, please contact NET LED.

Applications: > Retail applications > Warehouse applications > Replaces traditional technology

Key Features: > High lumen output > Built-in drivers > 3 year warranty


xxxx

Custo

m L

ED

Pro

ducts

56

Rhea Series Pendant & Surface

Sizes 130mm/180mm

Housing Colour White/Black


Power Factor >0.90


Working Temperature -20°C to +45°C

Material ADC12

Weight 0.95kg/1.7kg

Life >35,000H

Installation Pendant or Surface Mount


Aureola Series Pendant & Surface

Sizes 350mm/450mm/600mm



Power Factor >0.90



Material 6063AL

Weight 1.9kg/3kg/5kg

Life >35,000H



Cust

om

LED

Pro

duct

s

57

Aglaia Series Pendant & Surface




Power Factor >0.90



Material ADC12

Weight 0.95kg/1.7kg

Life >35,000H



Clock Series Pendant & Surface


Housing Colour Silver/White


Power Factor >0.90



Material ADC12


Life >35,000H



UBOAT Series IP65 Tri-Proof

Sizes 1200mm

Housing Colour Grey/Black


Power Factor >0.90



Material ADC12

Weight 5.0kg

Life >35,000H



Custo

m L

ED

Pro

ducts

58

Presented here is a selection of custom LED products. To discuss your custom requirements please contact your regional Sales Manager or NET LED Lighting on 01223 851505.

Please Note:

Retail Flood Light by Leyond

Power 45W


Power Factor >0.9






Dimensions 230x145x91.5mm


Cust

om

LED

Pro

duct

s

59

Messagemaker Displays Ltd was formed in 1991, specialising in the design, manufacture and distribution of a wide range of LED displays.

NET LED is an approved authorised distributor for the static, scrolling and moving message displays typically found in retail and commercial environments.

LED message boards are ideal for situations when you need to get the message across with words or symbols, simply and strongly. LED scrolling message signs capture attention. Movement, light and colour can be combined to draw attention to important messages and provide a continuous status update.

PC software is provided allowing the simple creation and storage of interesting effects or to programme a sequence of LED messages.

A scheduling feature allows messages to appear at fixed times, days or dates.

LED message boards are available in both internal and external, sunlight readable versions.

LED Signage by MessageMaker Displays Ltd.

Applications: > Digital advertising > Entertainment > Education > Financial & Forex > Office environments > Public information > Retail > Industrial & safety > Sports > Transport

Product Features Include: > Single line or multiple line formats available > Can show scrolling text, multiple screens of fixed text

or simple animations > Turbo series for outward facing window applications > 7 scrolling speeds, over 40 text effects, proportional

font option and multiple fonts > Show different messages every day, or different times

by using message scheduling > Keypad of PC software controlled, Ethernet and serial

connections standards > Can be used as a clock, time zone display, countdown

or count up event timer

LED

Sign

age

60

Single Line Red 13Chars

LED Colours Red

Text Shown 13 Characters

Text Size 54mm

Connectivity Serial

Power Supply External 230V AC

Max Power 15W

Weight 2kg


Supplied with PC software control

Handheld IR controller

Application Indoor use only


Single Line Tri-Colour 13Chars

LED Colours TriColour - Red, Amber, Green

Text Shown 13 Characters

Text Size 54mm

Connectivity Serial/Ethernet


Max Power 15W

Weight 2kg



Handheld IR controller



Single Line Tri-Colour 20Chars


Text shown 20 Characters

Text Size 54mm



Max Power 25W

Weight 2.5kg



Handheld IR Controller



LED

Sig

nag

e

61

Single/Bi Line Tri-Colour 13/20Chars


Text shown 14/21 Characters

Text Size 54/120mm



Max Power 45W

Weight 4.5kg



Handheld IR Controller



Single Line Outdoor Red

LED Colours Red


Text Size 54mm



Max Power 15W

Weight 2.5kg



Application IP65 - Indoor or Outdoor use

Part Number Red NET 33-45-13

Single Line Outdoor Blue

LED Colours Blue


Text Size 54mm



Max Power 15W

Weight 2.5kg



Application IP65 - Indoor or Outdoor use

Part Number Blue NET 33-45-15

LED

Sign

age

62

www.netled.co.uk

EnvironmentQuality is important when selecting an LED lighting solution, as is its impact on the environment. We work with manufacturers that adopt both quality and environment standards.

We too adhere to British Standards Institution (BSI) codes of practice and hold ISO 14001 accreditation. This addresses various aspects of environmental management geared towards consistent improvement. We aim to ensure that the products and the sales and distribution services we provide meet the high standards we promise.

Environm

ent

63

Stocksigns is the UK’s leading supplier of high quality signage with over 56 years of experience. It is the signage expert for many industries specialising in rail, aggregate and quarry industies, care homes and the education market - to name a few.

Based in Redhill, Surrey, Stocksigns supplies many resellers in the UK, as well as exporting signs to over 35 countries around the world.

NET LED is an approved authorised distributor for the static range of signage relating to electrical safety.

As a member of the Health & Safety Sign Association, Stocksigns endorses all UK standards and the safety signs that conform to these standards. All signs provided conform to current UK legislation and communicate best practice for meeting the management of health and safety in the workplace.

The safety signs can be provided in a range of sizes in either self adhesive vinyl format or printed directly onto rigid plastic.

Safety Signageby Stocksigns Ltd.

Self Adhesive Vinyl: > Gloss flexible PVC > Peel-off backing for easy use > Low cost > Adheres to most smooth clean surfaces including

curves

Rigid PVC Plastic: > 1mm thick semi rigid PVC > Suitable for interior and exterior uses > Most plastic signs come pre-drilled with holes for easy

fixing

Safe

ty S

ignage

64

Electrical Hazard Signage

Caution

Dimensions 100x75mm 150x100mm

Rigid Plastic x 1 NET 35-47-03 NET 35-47-05

Self Adhesive Label x 1 NET 35-47-07 NET 35-47-09

Danger Electricity




Warning Label

Dimensions 75x50mm

Self Adhesive Label x 50 NET 35-47-01




Danger Isolate




Danger 230V




Danger High Voltage




Danger HV Keep Away



Electricity Label



Electric Shock Label

Saf

ety

Sig

nag

e

65

Quality Control Labels

Danger 415V Label






Danger of Death




Danger of Death Yellow



Danger 230V Label

Dimensions 38x18mm

Rolls (Labels x 500) NET 35-47-83

Calibrated Labels

Dimensions 38x18mm


Tested Labels

Dimensions 38x18mm


ES Tested Labels

Dimensions 38x18mm


Faulty Labels

Dimensions 38x18mm


Do Not Use Labels

Dimensions 38x18mm


Do Not Use Bold Labels

Safe

ty S

ignage

66

Features & Benefits of LED Lighting

LED TechnologyA light-emitting diode (LED) is an electronic light source. The LED was introduced as a practical electronic component in 1962. All early devices emitted low-intensity red light, but modern LEDs are available across the visible, ultraviolet and infra red wavelengths, with very high brightness.

LEDs are based on the semiconductor diode. When the diode is forward biased (switched on), electrons are able to recombine with holes and energy is released in the form of light. This effect is called electroluminescence and the colour of the light is determined by the energy gap of the semiconductor. The LED is small in area (less than 1mm²) with integrated optical components to shape its radiation pattern and assist in reflection.

Operating LifeLEDs are solid-state devices so are not subject to catastrophic failure when operated within design parameters. LEDs are designed to operate upwards of 50,000 hours at 25°C ambient temperatures. Operating life is characterised by the degradation of LED intensity over time. Quality LEDs should provide a useful light output > 50,000 hours. After which ongoing degradation will result in the end of its useful life, although the LED will continue to operate as output diminishes for up to 100,000 hours.

With LED technology everyone can reduce energy costs and

protect the environment.

LED lighting advantages over traditional light sources include:

Lower energy consumption: typically 65%

energy saving - lower running costs & lower CO2

emissions/carbon footprint

Longer life: typically 50,000 hour life

expectancy - reduced maintenance & recycling cost

savings

Environmentally friendly: no toxic

chemicals (phosphor, mercury, lead) - recycling

benefits

Safer for surroundings: no UV - good for

health, works of art & fabrics

User friendly: can be cycled OFF and ON

immediately at full brightness

Financial benefit: quality LED lighting qualifies

for the Government Enhanced Capital Allowance

scheme

Feat

ure

s & B

enefits

67

Fluorescent Versus LEDThe benefits of upgrading your existing lighting to LED lighting are numerous, and include reduced running costs, longer product life and improved eco friendliness.The main benefits of switching to LED lighting are:

� An LED product typically reduces your electricity running costs by 65% when compared with a standard fluorescent tube, with no loss of light;

� An LED product lasts over three times longer so additional savings are achieved in capital, labour and administration costs normally associated with regularly having to replace lamps, starters and ballasts;

� No ultra violet (UV) light is produced. UV light is not only potentially hazardous to people, but it damages materials, fading colours in fabrics and artwork;

� LED tubes contain no glass, no phosphor, no mercury, and no lead, all typically found in fluorescents, so they can be more easily and safely recycled with all the associated costs and environmental savings achieved.

Against the installed cost of £61.68 the low energy LED tube

will have paid for itself 4 times over during its lifetime!

Cost of OwnershipFluorescent versus LED Tubes

Fluorescent Tube58 W (5ft) T8

NET LED Tube22 W (5ft) T8

Prices – Tube £4.50 £31.68

– Ballast £6.00 £0.00

– Starter £0.60 £0.00

Number of replacements – Tube 3 1

– Ballast 1 0

– Starter 3 0

Material costs £21.30 £31.68

Labour costs to replace tube (£30 per tube) £90.00 £30.00

Total cost of installation £111.30 £61.68

Tube Power Consumption 58 22

Ballast Power Consumption 8 0

Total Power Consumption (W) 66 22

Life Expectancy (hours) 20,000 50,000

Total Power Consumption at 50,000 hrs (kWh) 3300 1100

Total Electricity Running Costs (10.0 p/kWh) £330.00 £110.00

Total Cost of Ownership based on 50,000 [email protected]/kWh £441.30 £171.68

LED Tube Saves £269.62

Cost of OwnershipWhen comparing the costs of fluorescent strip lights with LED tubes, it is important to take into account the total cost of ownership - not just the prices of the respective tubes, as you are not comparing like-for-like. This can be done by considering the total costs of installation and maintenance, and the total running costs which when combined give the total cost of ownership and hence the true savings which can be achieved by installing LED tubes. LED tubes will typically last three times longer than the equivalent fluorescents and do not require control gear (ballasts and starters) which are needed to light fluorescents. During the life of one LED tube, it is likely that you would have to use three fluorescents, three starters, and replace the ballast once. These hardware costs, plus the labour costs to replace them, will normally far exceed the cost of installing an LED tube, even before any running costs are considered.

Featu

res &

Benefits

68

LED Technical Glossary

Ampere (Amp) – The unit for measuring rate of flow of electrical current: Current (Amps) = Power (Watts) / Voltage (Volts)

Brightness – Often used incorrectly with respect to illumination as a synonym for luminous flux. An objective measurement of the visible power of a light source. The term is correctly used when describing screen brightness in a display or television.

Colour Rendering Index (CRI) – A measure of the degree of colour shift objects undergo when illuminated by the light source as compared with those same objects when illuminated by a reference source of comparable colour temperature. The reference source has a CRI of 100.

Colour temperature – The description used to describe the effect of heating an object until it glows incandescently. The emitted radiation, and apparent colour, changes proportional to the temperature; easily envisioned when considering hot metal in a forge that glows red, then orange, and then white as the temperature increases.

Delivered Light – The amount of light a lighting fixture or lighting installation delivers to a target area or task surface, measured in footcandles (fc) or lux (lx).

Diffuser – An object with irregularities on a surface causing scattered light diffusions.

Digital Addressable Lighting Interface (DALI) – A digital communications protocol for controlling and dimming lighting fixtures, originally developed in Europe.

Efficacy – The light output of a light source divided by the total electrical power input to that source, expressed in lumens per watt (lm/W).

Flux / Luminous Flux – Luminous flux is the measure of the perceived power of light produced by the LED, adjusted to reflect the varying sensitivity of the human eye to different wavelengths of light.

Forward voltage – LEDs are current driven devices. If an external current is passed through the device, a forward voltage will be developed across the diode.

Heat Sink – A part of the thermal system that conducts or convects heat away from sensitive components, such as LEDs and electronics.

High Power LED – A high power LED, sometimes referred to as a power LED, is one that is driven at a current of 350 mA or higher.

Illuminance – The intensity of light falling on a surface area. If the area is measured in square feet, the unit of illuminance is footcandles (fc). If measured in square metres, the unit of illuminance is lux (lx).

Kelvin Temperature – Term and symbol (K) used to indicate the comparative colour appearance of a light source when compared to a theoretical blackbody. Yellowish incandescent lamps are 3000K.

LED Chip (Chip) – The light producing semiconductor device that may or may not be incorporated into an LED.

LED Driver – An electronic circuit that converts input power into a current source — a source in which current remains constant despite fluctuations in voltage. An LED driver protects LEDs from normal voltage fluctuations, overvoltages, and voltage spikes.

Light Emitting Diode (LED) – A Light Emitting Diode (LED) is a solid-state semiconductor device that converts electrical energy directly into light. At its most basic level, the semiconductor is comprised of two regions. The p-region contains positive electrical charges while the n-region contains negative electrical charges. When voltage is applied and current begins to flow, the electrons move across the n region into the p region. The process of an electron moving through the p-n junction releases energy. The dispersion of this energy produces photons with visible wavelengths.

Lumen (lm) – The international (SI) unit of luminous flux or quantity of light and equals the amount of light that is spread over a square foot of surface by one candle power when all parts of the surface are exactly one foot from the light source.

Lumen Output – The total lumens emitted of a light source, system, or solution.

Luminaire – A lighting fixture complete with installed lamps and other accessories.

Lux (lx) – The international (SI) unit of illuminance, or luminous flux incident on a unit area, frequently defined as one lumen per square meter (lm/m²).

Power Factor – The active power divided by the apparent power (i.e., product of the rms input voltage and rms input current of a driver).

SMDs – Surface-mount LEDs.

Ultraviolet (UV) – Electromagnetic radiation with wavelength shorter than that of visible light

Volt – The term used to describe the electrical potential difference between oppositely charged conductors.

Watt – The unit of electrical power as used by an electrical device during its operation. Many lamps come with rating in watts to indicate their power consumption.

LED

Tech

nic

al G

loss

ary

69

NISA Today’s“It is a new concept for an electrician to fit LED lights rather than fluorescent tubes and being able to utilise conventional fittings has made them very simple to install. The store opened on the 19th June 2009 and is recognised as one of the most energy efficient shops in the area.”

Terry Wager, Electrical Engineer to Nisa – Fenstanton

Reigate & Banstead Borough Council“We achieved a payback of around 2 years equating to a saving in annual electricity costs of £13,119 per annum and a reduction in our carbon footprint of 67 tonnes CO2 and greatly improved the lighting effect in these public areas.”

Raymond Dill, Environmental Initiatives Officer, Reigate & Banstead Borough Council

Hertfordshire Constabulary“We installed over 800 NET LED Tubes in police premises during 2010 and 2011 and as well as seeing a reduction in electricity consumption of over 60%, the LED Tubes have been virtually maintenance free.”

Mike Carvell, Building Services Manager, Hertfordshire Constabulary

clients’ comments...

NET LED Ltd.

6 Glenmore Business Park

Ely Road, Waterbeach

Cambridge

CB25 9FX

T: 01223 851505

F: 01223 851506

E: [email protected]

W: www.netled.co.uk

AUTHORISED DISTRIBUTOR

In keeping with the company’s policy of continued development, NET LED reserves the right to change specifications without notice. The information contained herein is representative only and does not form part of any contract.

Documents

NET LED Catalogue 2014 V4