Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
AUCTION #1
MAJOR OFFERING: (2) ONLINE AUCTIONSCNC MACHINE SHOP • MULTI MILLION DOLLAR INVENTORY • PRODUCT LINES
•TRADE NAMES • SPECIALTY MACHINERY By Order of the Secured Creditor
Navtec Rigging Solutions351 New Whitfield Street, Guilford, CT 06437 USA
Navtec Fiber Winding Machine Model WBP-1-4-120-OMNIPC
Complete CNC Machine Shop & Support EquipmentSale Date: Thursday, April 6, 1:00 PM (ET)
Navtec Heading Press (-540)
Eurotech Biglia CNC Turning Center Model B1200LY
Ikegai CNC Turning Center Model TU30L
2” Capacity
New 2002
New 2010
Navtec Hydraulic Pull Tester 200,000 lb. Cap.
Kitamura CNC Vertical Machining Center Model MyCenter 3Xi
200,000 lb. Cap
New 2005
1 of 3
Intellectual Property, Inventory & Specialty MachinerySale Date: Wed., April 5, 1:00 PM (ET)
Sale under Management of:Thomas Industries, Inc.
2414 Boston Post Road, Guilford, CT 06437-2310 Phone (203) 458-0709 • Fax (203) 458-0727
email: [email protected] www.thomasauction.com
Inspection: Tues & Weds, April 4 & 5, 9 AM to 4 PM (ET)
AUCTION #2
AUCTION #1 - WEDNESDAY, APRIL 5 • FIRST LOT CLOSES AT 1:00 PM (ET)Intellectual Property - Inventory - Specialty Machinery
Open HOuse InspectIOn: tues & Weds, AprIl 4 & 5, 9 AM tO 4 pM (et)2
INTELLECTUAL PROPERTYTrademarks/Brands: Navtec, Navtec Rigging Solutions, Inc., Norseman
Gibb, TFC, Navtec AT CableProduct Lines: Hydraulic, Carbon, Norseman Gibb, Rod Rigging and
Fiber, Including: Product Drawings, Blue Prints, Process Sheets, Vendor Information, etc.
INVENTORY – BY PRODUCT LINEHydraulic: Approximately $650,000, Un-Audited.Carbon: Approximately $45,000, Un-Audited.Norseman Gibb: Approximately $325,000, Un-Audited.Rod Rigging: Approximately $1.1 Million, Un-Audited.Fiber: Approximately $300,000, Un-Audited.
NAVTEC – HEADING PRESSESNavtec Heading Press (-540),
Hydraulic, 600 Ton, 2” Bar Capacity
Navtec Heading Press (-91), Air Over Hydraulic, 7/8” Bar Capacity, Mounted on Blue Cart
Navtec Heading Press (-76), Hydraulic, 10,000 PSI
Navtec Heading Press (-60), parts machine
NAVTeC HeADING PreSS (-540) NAVTeC HeADING PreSS (-91)
NAVTeC HeADING PreSS (-76) LArGe ASSOrTMeNT OF DIeS FOr HeADING PreSSeS
2”Capacity
7/8”Capacity
AUCTION #1 - WEDNESDAY, APRIL 5 • FIRST LOT CLOSES AT 1:00 PM (ET)Intellectual Property - Inventory - Specialty Machinery
All IteMs In AuctIOn #1 suBJect tO prIOr sAleserIOus InQuIrIes cOntAct tOM GAGlIArdI III At 203-458-0709 X102 3
NAVTEC - WINDING MACHINENavtec Fiber Winding Machine Model
WBP-1-4-120-OMNIPC S/N J2485 (New 2005), 100’ Winding Bed w/ Powered Taping Carriage, 100’ Braiding Bed w/ Tail Stock and Heat Stock, Manually Operated, 64 Spool Capacity Braider Moved on Tracks
NAVTEC - ROD STRAIGHTENERNavtec Rod Straightener w/ 5’
Diameter Horizontal Payoff reel, (2) Hydraulic Straightening Heads, (1) Brand New Straightening Head in Crate
NAVTeC HyDrAULIC PULL TeSTer, 2-LOAD CeLLS
LArGe INVeNTOry OF GAMMA BAr rOD rIGGING
(2) NAVTeC A-FrAMe HyDrAULIC PreSSUre TeSTerS
New 2002
NAVTeC FIBer WINDING MACHINe MODeL WBP-1-4-120-OMNIPC
NAVTeC rOD STrAIGHTeNer
CArBON STrANDING UNITS W/LeAD WeIGHTS
New2005
NAVTeC HyDrAULIC FATIGUe TeSTer
NAVTEC - CARBON RIGGINGNavtec Carbon Rigging Equipment Consisting of: Hydraulic Testing
Benches, (4) Lead Weight Carbon Stranding Machines, Heating Benches, Assorted Dies and Inserts
NAVTEC - TESTINGNavtec Hydraulic Pull Tester, 200,000 Lb Capacity, 2-Load Cells,
3-Hydraulic Cylinders enclosed in 5’ x 20’ Wooden Case w/ Top Covers, Acu-rite III DrO, CIB Day & Night Color Camera System, Hydraulic Pump Unit, PC Based Controls
Tinius Olsen Tensile Tester, 60,000 lb. Tester(2) Navtec A-Frame Hydraulic Pressure TestersNavtec Hydraulic Fatigue TesterNavtec Hydraulic Cylinder Tester w/ 2’ x 10’ explosion Coffin, enerpac
P228 Hydraulic Pump
200,000 lb. Cap
1 of 4
1 of 4
BULK BID OFFERING All items will be listed individually.
Following the bidding of the individual items a bulk bid lot will be offered
including all items. The individual bids will be totaled and the Bulk Bidding will start at an increment 10% higher than
the sum of the individual bids. If a Bulk Bid is received the individual bids will be voided and the Bulk Bidder will prevail.
AUCTION #2 – THURSDAY, APRIL 6, 1:00 PM (ET) Complete CNC Machine Shop
OnlIne AuctIOn – Internet BIddInG OnlY – WWW.tHOMAsAuctIOn.cOM4
CNC – TURNING CENTERSEurotech Biglia CNC Turning Center Model B1200Ly,
S/N 10862 (New 2010), Fanuc 31i-A CNC Control, Live Tooling, (12) Tool Turret, C-Axis, Tailstock, Chip Conveyor
Leadwell CNC Turning Center Model LTC-25CXL, S/N L2TJH0893 (New 2009), Fanuc Oi-TC CNC Control, 12-Position Turret
Ikegai CNC Turning Center Model TU30L S/N T5533-09/53914V (New 2002), Fanuc Series 18i-T CNC Controls, 12-Postion Turret, Sub Spindle, 16” 3-Jaw Chuck, Chip Conveyor, 40 Taper Tooling
Takisawa CNC Turning Center Model TW-30 S/N C9712097-251 (New 1997), Fanuc Series 21-T CNC Controls,12-Position Turret, Sub Spindle, Chip Conveyor, Coolant System, LNS Hydrobar Hydraulic Bar Feeder w/ Hydraulic Unit
NC - LATHEHarrison CNC engine Lathe Model Alpha 550 Plus,
S/N A50520 (New 1998), Ge Fanuc Alpha CAM Operated Control, 20” Swing x 80” Between Centers, 15-1800 rPM Spindle Speeds, 16” 3-Jaw Chuck, Coolant System
HORIZONTAL BAND SAWSCosen Horizontal Band Saw Model C320ZNC-CF, S/N
C961475 (New 2007), Twin Column Automatic, 12 1/2” x 15” Cutting Capacity, Hydraulic Clamping, 5 HP Drive, Numeric Controls
Hyd-Mech Horizontal Band Saw Model S-20A Series II, S/N 809972900 (New 1997), 13” x 18” Cutting Capacity, 5 HP Drive, Hydraulic Clamping, roller Out Feed Table
TAkISAWA CNC TUrNING CeNTer MODeL TW-30
HArrISON CNC eNGINe LATHe MODeL ALPHA 550 PLUS
kITAMUrA CNC VerTICAL MACHINING CeNTer MODeL MyCeNTer 3XI
eUrOTeCH BIGLIA CNC TUrNING CeNTer MODeL B1200Ly
LeADWeLL CNC TUrNING CeNTer MODeL LTC-25CXL
IkeGAI CNC TUrNING CeNTer MODeL TU30L
New 2010
1 of 3
MATSUUrA CNC VerTICAL MACHINING CeNTer MODeL MC-760V2
COSeN HOrIZONTAL BAND SAW MODeL C320ZNC-CF
HyD-MeCH HOrIZONTAL BAND SAW MODeL S-20A SerIeS II
New 2007
New 2009
New 2002
New 1997
BrIDGePOrT 1.5 HP VerTICAL MILLING MACHINe
1 of 3
AUCTION #2 – THURSDAY, APRIL 6, 1:00 PM (ET) CNC Machining & Turning Centers - Toolroom - Plant Support
Open HOuse InspectIOn: tuesdAY & WednesdAY AprIl 4 & 5, dOOrs Open At 9 AM (lOcAl tIMe). 5
CNC - VERTICAL MACHINING CENTERS
Kitamura CNC Vertical Machining Center Model MyCenter 3Xi, S/N 12388, Fanuc Series 16i-M CNC Controls, 30 Position ATC, 17” x 35” T-Slot Working Table, Parts Catcher, Coolant System, 12” 3-Jaw Chuck, kurt 8” Machine Vise, 40 Taper Tooling
Kitamura CNC Vertical Machining Center Model MyCenter 3Xi S/N 12086, Fanuc Series 16i-M CNC Controls, 30 Position ATC, 17” x 35” T Slot Working Table, Parts Catcher, Coolant System, 12” 3 Jaw Chuck, kurt 8” Machine Vise, 40 Taper Tooling
Kitamura CNC Vertical Machining Center Model MyCenter 3Xi, S/N 12079, Fanuc Series 16i-M CNC Controls, 30 Position ATC, 17” x 35” T Slot Working Table, Parts Catcher, Coolant System, 12” 3 Jaw Chuck, kurt 8” Machine Vise, 40 Taper Tooling
Matsuura CNC Vertical Machining Center Model MC-760V2, S/N 83063288 (New 1983), Matsuura eN4-0429A CNC Controls, 30 Position ATC, Coolant System, yuasa Indexer, 6” Machine Vise, 40 Taper Tooling
MILLING MACHINES - VERTICALBridgeport 2 HP Vertical Milling Machine
S/N 12Br245964, , 9” x 42” Table, Acu-rite 2 Axis DrO, Power Feed
Bridgeport 1.5 HP Vertical Milling Machine S/N 12Br132297, 9” x 42” Table, kurt 6” Machine Vise, Sony Millman 2 Axis DrO
Bridgeport 1.5 HP Vertical Milling Machine S/N 12Br223809, 9” x 42” Table, Power Feed, kurt 6” Machine Vise, Acu rite Qwik Count 2 Axis DrO
Bridgeport 1.5 HP Vertical Milling Machine S/N 12Br166935, 9” x 42” T Slot Table, Power Feed, kurt 9” Machine Vise
kINWA eNGINe LATHe MODeL CHD760X2300 rOMI eNGINe LATHe MODeL 16-8 16”
STANDArD MACHINery SWAGer MODeL#4
kINWA eNGINe LATHe MODeL CHD760X3000
New 2008
New 2008
CUSTOMer HyDrAULIC 4-POST PreSSeS
GrOB VerTICAL MeTAL CUTTING BAND SAW
MITUTOyO OPTICAL COMPArATOr MODeL PH-A14
1 of 4
QUINCy 25 HP rOTAry SCreW AIr COMPreSSOr MODeL QGB-25
X 80”CC
LArGe PArTS INVeNTOry: CArBON/HyD/NOrSeMAN
AUCTION #2 – THURSDAY, APRIL 6, 1:00 PM (ET) Forklifts - Trucks - Raw Materials
OnlIne AuctIOn – Internet BIddInG OnlY – WWW.tHOMAsAuctIOn.cOM6
MILLING MACHINES - HORIZONTAL
Cincinnati Horizontal Milling Machine Model #2, S/N 2A2U1L-48, 12” x 52” Slot Table
SURFACE GRINDERSBridgeport Surface Grinder
Model 815, Hand Feed, 8” x 15” Walker Ceramic Magnetic Chuck, Over Wheel Dresser
SWAGER MACHINESStandard Machinery Swager
Wire Drawing/reducing Machine Model #4
Synflex Coupling Swaging Machine
STePHeN BADer CONTINUOUS GrINDer AND POLISHING MACHINeS
DAreX DrILL GrINDer & SHArPeNer MODeL AP5100
WILTON HD BeNCH VISeS
CHeVy PICkUP TrUCk MODeL SILVerADO 1500
CATerPILLAr 5000 LB LPG FOrkLIFT MODeL GP25
New 2009
1 of 2
VIDMAr CABINeTS SPANCO 1-TON A-FrAMe GANTry rAW MATerIALS
$300,000+At Cost
LATHESKinwa engine Lathe Model CHD760X3000, (New 2008), 30” Swing x 118” CC,
Inch/Metric Threading, 20-1200 rPM Spindle Speeds, Cross Feed, Tool Post, 16” 3-Jaw Chuck, Coolant System, DrO-201 2-Axis DrO
Kinwa engine Lathe Model CHD760X2300 S/N CH08839 (New 2008), 30” Swing x 90” CC, Inch/Metric Threading, 20-1200 rPM Spindle Speeds, Cross Feed, Tool Post, 12” 3 Jaw Chuck, Coolant System
Romi engine Lathe Model 16-8, S/N 060279B, 16” Swing x 80” CC, Inch/Metric Threading, 56-1120 rPM Spindle Speeds, 12” 3 Jaw Chuck, Tool Post, Coolant System
Cadillac engine Lathe Model 1428 14” Swing x 28” CC, 8” 3 Jaw Chuck, Inch Threading, 55-1800 rPM Spindle Speeds, Tool Post, Tail Stock
Warner & Swasey Turret Lathe Model 3 S/N 2352975, Cross Feed, 6-Position Turret System
Jones & Lamson Turret Lathe Model 7B#4 1/2, 6-Position Turret
HYDRAULIC PRESSES (3) Customer Hydraulic 4-Post Presses
VIeW OF CNC TOOL HOLD CArTS
1 of 4
cOMplete lOt cAtAlOG, reGIstrAtIOn & BIddInG At WWW.tHOMAsAuctIOn.cOM
AUCTION INFORMATION
7
Buyer’s Premium: 15%
Staggered Closing Times: Lots Have 60-Second Staggered Closing Times.
Auto Extend Bidding: If a bid is submitted with less than 3-minutes remaining, the closing time for that lot will be extended by 3-minutes.
Payment Due In Full: Friday, April 7, 2017
Payment Types: Certified Check or Wire Transfer
As-Is Where-Is: All Items Are Sold “As-Is Where-Is” With No Warranty or Guarantee of Operating Condition. Auctioneer Strongly recommends That Buyers Inspect equipment Prior to Bidding.
*The above terms and dates apply to both Auction #1 and Auction #2
Removal: All items must be removed by Friday, April 21, 2017. NO eXCePTIONS. removal Hours: 9 AM to 4 PM (M-F).
Removal Costs: Buyers are fully responsible for all cost to remove their purchases. Please get removal quotes prior to bidding and bid accordingly.
TECHNICAL INFORMATION Tom Gagliardi III (203) 458-0709 x102PAYMENT INFORMATION Irina Lekhmus (203) 458-0709 x108ONSITE INFORMATION John Standish (203) 915-3430
THOMAS INDUSTRIES 2414 Boston Post Road
Guilford, CT 06437-2310(203) 458-0709
(203) 458-0727 Faxwww.thomasauction.com
Under Management of:
Complete Terms & Conditions at www.thomasauction.com
MAJOR OFFERING: (2) ONLINE AUCTIONSBy Order of the Secured Creditor
Navtec Rigging Solutions351 New Whitfield Street, Guilford, CT 06437 USA
VERTICAL BAND SAWSGrob Vertical Metal Cutting
Band Saw S/N 13699 w/ Grinder
INSPECTION - TESTING EQUIPMENT
Mitutoyo Optical Comparator Model PH-A14, S/N 906005, Mitutoyo QM-Data 200 Digital readout
Rockwell Hardness Tester Model 3Jr, S/N 3Jr-5553
VEHICLESChevy Pickup Truck Model
Silverado 1500, VIN #1GCek14CX9Z234150 (New 2009), 4x4, Cloth Interior, Automatic Transmission, Bed Liner, roof rack
TOOL & CUTTER GRINDERSK.O. Lee Tool & Cutter Grinder
5” x 26” Table, Universal Grinding Wheel Head, Motorized Work Head, Tail Stock
AIR COMPRESSORS - DRYERS
Quincy 25 HP rotary Screw Air Compressor Model QGB-25, Mounted on Horizontal Air Tank
Quinch 25 HP Horizontal Tank Air Compressor Model QT25ST2000083, S/N 20021024-0190
Caterpillar 5000 lb LPG Forklift Model GP25, S/N 5AM02876, 190” Mast, Side Shift, 2 Stage Mast, Solid Tires
PLANT SUPPORTGorbel 2000 lb. Free Standing Bridge Crane
System, w/ Cofing 1-Ton Chain Hoist, Approx. 20’ Span x 50’ runway
(4) Stephen Bader Continuous Grinder and Polishing Machines, Model Space Saver
Darex Drill Grinder & Sharpener Model AP5100 Bench Top
Parker Hose Crimper Model Minikrimp, (4) Wilton HD Bench Vises, (2) Vidmar Cabinets, Spanco 1-Ton A-Frame Gantry w/Chain Hoist, Ajax radial Drill Press, Jet 8” Belt/12” Disc Sander, Kalamazoo 14” Chop Saw, Manhattan Pedestal Drill Press Model 951225, Rother 10 Ton Pneumatic Press
Miscellaneous Support: Pallet racking, Cantilever racking, Industrial Fans, Work Benches, Vises, racks, Shelving, Hand Trucks, Forklift Man Lift, Pallet Jacks, Job Boxes, Bench Grinders, Hand Tools, Power Tools, Vacuum Tank w rectifiers, (2) 29” x 93” Interior Dimensions Poly Soap Cleaning Tanks, etc.
AUCTION #1 Intellectual Property, Inventory & Specialty Machinery
Sale Date: Wed., April 5, 1:00 PM (ET)
AUCTION #2 Complete CNC Machine Shop & Support Equipment
Sale Date: Thursday, April 6, 1:00 PM (ET)
Inspection: Tues & Weds, April 4 & 5, 9 AM to 4 PM (ET)
FORWARDING SERVICE REQUESTED
PRESORTED FIRST CLASS MAIL
U.S. POSTAGE
PAIDPermit No. 80
Milford, CT
THOMAS INDUSTRIES 2414 Boston Post Road Guilford, CT 06437-2310(203) 458-0709 • (203) 458-0727 Faxhttp://www.thomasauction.com
Under Management of:
(2) MAJOR ONLINE AUCTIONSBy Order of the Secured Creditor
Navtec Rigging Solutions351 New Whitfield Street, Guilford, CT 06437 USA
AUCTION #1INTeLLeCTUAL PrOPerTy, INVeNTOry & SPeCIALTy MACHINerySale Date: Wednesday, April 5, 1:00 PM (ET)
AUCTION #2COMPLeTe CNC MACHINe SHOP & SUPPOrT eQUIPMeNTSale Date: Thursday, April 6, 1:00 PM (ET)
Buyer’s Premium: 15%
By Order of the Secured Creditor
Navtec Rigging Solutions351 New Whitfield Street, Guilford, CT 06437 USA
COMPLETE CNC MACHINE SHOP – INTELLECTUAL PROPERTY - INVENTORY
Large Parts Inventory: Carbon/Hyd/Norseman Leadwell CNC Turning Center Model LTC-25CXL
New 2009
AUCTION #1 Sale Date:
Wednesday, April 5, 1:00 PM (ET)
AUCTION #2 Sale Date:
Thursday, April 6, 1:00 PM (ET)
Sale under Management of:Thomas Industries, Inc.
2414 Boston Post Road, Guilford, CT 06437-2310 Phone (203) 458-0709 • Fax (203) 458-0727
email: [email protected] www.thomasauction.com