NAVSEA Weapons Listing

WEAPONS DEPARTMENT

The Crane Division of the Naval Surface Warfare Center, Weapons Department has expertise with small caliber weapons, ammunition,machine-gun mounts, rifle grenades, mortar ammo, and shoulder-fired ordnance items.

The department resides in a 120,000 square foot building containing a 25 yard indoor firing range, a 100 meter underground test facility with a walk-in environmental chamber, cyclic load weapons simulation, a small-arms repair facility, powder-coating facility, prototype shop, and a vast small-arms secure storage area. External to the main building is a 1000 yard outdoor test range, an ammo loading facility for limited production, and 18,000 square feet of explosives storage.

The Armament Systems Branch of the Weapons Department is responsible for the full life cycle support of mounting systems for small arms weapons and small minor caliber weapon systems. This organization performs a wide variety of functions from concept development, design, test and evaluation, rapid prototyping, fielding, and supporting small arms weapon systems up to 30mm on Navy Patrol Craft, Ships, rotary-wing aircraft, and land vehicles. Primary tasking comes from the U.S. Navy Special Warfare Command, Naval Sea Systems Command, Naval Air Systems Command, and the U. S. Special Operations Command. Other customers include U.S. Army, U.S. Air Force, Marine Corps, U. S. Coast Guard, Department of Energy, State Department, FBI and Foreign Military Sales.

M11 Pistol

Ammunition: A260JHP A359 dummy A362 FMJ subsonic A363 M882 FMJ

Weapon Specifications Model M11 NSN 1005-01-118-2640 Manufacturer SigArms, USA Caliber 9mm NATO (9X19) Mechanism type Double-action semi-auto Magazine type Double-stacked box Ammo capacity 10+1 rounds Rate of fire N/A Weight (empty) 1 lbs 10 oz Overall length 7.1 inches Barrel length 3.9 inches

Logistics: In-service Date 1994 Life expectancy 15,000 rounds Technical Manual # TM 9-1005-325-23&P Operator Manual # TM 9-1005-325-10

Discussion: The M11 pistol is the standard concealable pistol within US Navy forces. It is a recoil-operated semi-automatic pistol that can be fired in both single and double-action modes. It has no safety, but has a de-cocking lever mounted on the frame. Accessories: Holster, Pistol, Hip, M12, Holster, Pistol, M14 RH, Holster, Pistol, M14 LH Pocket, Ammunition, M1, Lanyard, Individual (Green)

M9 Pistol

Ammunition: A260JHP A359 dummy A362 FMJ subsonic A363 M882 FMJ

Weapon Specifications Model M9 NSN 1005-01-118-2640 Manufacturer Beretta, USA Caliber 9mm NATO (9X19) Mechanism type Double-action semi-auto Magazine type Double-stacked box Ammo capacity 15+1 rounds Rate of fire N/A Weight (empty) 2 lbs 2 oz Overall length 8.54 inches Barrel length 4.92 inches

Logistics: In-service Date 1994 Life expectancy 15,000 rounds Technical Manual # TM 9-1005-317-23&P Operator Manual # TM9-1005-317–10

Discussion: The M9 pistol is the standard pistol within US Navy forces. It is a recoil-operated semi-automatic pistol that can be fired in both single and double-action modes. It has a thumb safety which as acts as the de-cocking lever mounted on the slide. Accessories: Holster

AN/M8 PYRO PISTOL

Ammunition: M9A1, M74, M74A1, AN-M37, AN-M38, AN-M39, AN-M40, AN-M41, AN-M42, AN-M43, AN-M44, AN-M45, AN-M53, AN-M54, AN-M55, AN-M56, AN-M57, AN-M58

Weapon Specifications NSN 1005-00-726-5820 Model AN/M8 Pyro Pistol Manufacturer Caliber Mechanism type single shot Magazine type N/A Ammo capacity 1 round Rate of fire N/A Weight (empty) 2.13 lbs Overall length 8 inches Barrel length 4.125 inches

Logistics: In-service Date Life expectancy Technical Manual # TM 9-1095-201-15 Operator Manual # TM 9-1095-201-15

Discussion: Accessories:

M16A3

Ammunition: ball (M855 & M193), dummy (M199), tracer (M856 & M196), blank (M200), and rifle grenade (M195).

Weapon Specifications NSN 1005-01-357-5112 Model M16A3 Rifle Manufacturer Colt Firearms Caliber 5.56MM Mechanism type Gas operated Magazine type Double-stacked box Ammo capacity 30 + 1 rounds Rate of fire 750 Weight (unloaded) 7.4 lbs Weight (loaded) 8.8 lbs Overall length 40 inches Barrel length 21 inches


Discussion: The M16A3 Rifle is gas operated and can be fired either semi-automatic or automatic.

Accessories: Sling 1005-01-216-4510, Magazine 1005-00-921-5004

M4A1 Carbine

Ammunition: ball (M855 & M193), dummy (M199), tracer (M856 & M196), blank (M200), and rifle grenade (M195).

Weapon Specifications NSN 1005-01-382-0953 Model M4A1 Carbine Manufacturer Colt’s Mfg. Co. Caliber 5.56mm NATO Mechanism type Semi and full-auto Magazine type Double-stacked box Ammo capacity 30 round Rate of fire 700-970 rds per minute Weight (empty) 6 lbs 7 oz Overall length 33.0 inches Barrel length 14.5 inches


Discussion: The M4A1 is a gas-operated, magazine fed, carbine with a collapsible buttstock, and is capable of semi-auto or full-auto fire. The SOPMOD M4 accessory kit provides numerous items to increase the weapons effectiveness for Special Operations. Accessories: SOPMOD KIT

Mossberg 500 Shotgun

Ammunition: Weapon Specifications NSN 1005-01-371-4462 Model MIL-S 500 Manufacturer Mossberg Caliber 12 gauge Mechanism type pump slide action Magazine type tube Ammo capacity 5+1 round Rate of fire NA Weight (empty) 6.9 lbs Overall length 37.5 inches Barrel length 17 inches

Logistics: In-service Date Life expectancy 10,000 rounds Technical Manual # NA Operator Manual # SW370-BB-OPI-010

Discussion: The MIL-S 500 shotgun is the basic shotgun for US Navy Forces.

Accessories: NA

Mossberg 500 Shotgun (Folding)

Ammunition: Weapon Specifications NSN 1005-01- 439-5414 Model MIL-S 500 Manufacturer Mossberg Caliber 12 gauge Mechanism type pump slide action Magazine type tube Ammo capacity 5+1 round Rate of fire NA Weight (empty) 7.16 lbs Overall length 36.75 inches Length folded 27.5 inches Barrel length 17 inches

Logistics: In-service Date Life expectancy 10,000 rounds Technical Manual # NA Operator Manual # SW370-BB-OPI-010

Discussion: The MIL-S 500 shotgun is the basic shotgun for US Navy Forces.

Accessories: NA

MK46 MOD0 Light Machine Gun

Ammunition: A064 NATO 5.56mm Belt Ammo M855 / M856 4-Ball, 1-Tracer M27 Link A060 M199 Dummy Rounds A075 M200 Blank Rounds

Weapon Specification NSN 1005-01-476-6236 Model MK46 MOD0 Manufacturer FNMI Caliber 5.56mm NATO Mechanism type Automatic Magazine type 200 rd hard box, 100 rd soft pouch Ammo capacity 200 rounds Rate of fire 750 RPM Sustained rate 85 RPM (7 minutes) Weight (empty) 13 lbs. Overall length 36.5 inches Barrel length 14” (Right hand twist, 1 turn in 7”)

Logistics: In-Service Date 2001 Receiver Life Expectancy 100,000 rounds Technical Manual # TM-SW360-AG-TRS-010 Operator Manual # TM-SW360-AG-MMO-010

Discussion: The MK46 MOD0 5.56mm Light Machine Gun is a fully automatic weapon capable of being fired from prone or standing positions and addressing man-sized targets at 600m. It is used to augment SEAL platoons along with the MK43 and M4 Carbine weapons. Basic Issue Item: Weapon, BFA, Bipod Assembly, Sling, Cleaning Kit, Sight Adjustment Tools, Spare Barrel, Spare Barrel Bag, Operator’s Manual, Gages and Special Tools Accessories: Collapsible Buttstock, 100 Round Soft Pouch Magazine

M14 Rifle

Ammunition: ball (M80), match special ball (M118), tracer (M62), blank (M82), dummy (M63 & M172), grenade (M64), match (M852), and match long-range (AA11).

Weapon Specifications NSN 1005-00-589-1271 Model M14 Manufacturer Various Caliber 7.62mm NATO Mechanism type Semi-auto gas operated Magazine type Double-stacked box Ammo capacity 20 rounds Rate of fire N/A Weight (empty) 9 lbs 2 oz Overall length 44.3 inches Barrel length 22.0 inches

Logistics: In-service Date 1957 Life expectancy 25,000 rounds Technical Manual # TM 9-1005-223-90 Operator Manual # SW370-BK-MMI-020

Discussion: The M14 is a gas-operated semi-automatic rifle with a 20 round detachable box magazine. It can come with either a wooden or fiberglass stock. Accessories: Sling

M14SSR (Sniper Security Rifle)

Ammunition: : ball (M59, M80 & M80E1), match special ball (M118), match (M852), and match long-range (A170 & AA11).

Weapon Specifications NSN 1005-LL-L99-5690 Model M14 SSR Manufacturer NSWC Crane Caliber 7.62mm NATO Mechanism type Semi-auto gas operated Magazine type Detachable box Ammo capacity 20 rounds Rate of fire N/A Weight (empty) 15 lbs 0 oz Overall length 45.0 inches Barrel length 24.1 inches

Logistics: In-service Date 1975 Life expectancy 6,000 rounds Technical Manual # NA Operator Manual # SW370-BG-OPI-010

Discussion: The M14SSR is a modified M14 with a 20 round detachable box magazine, a medium heavy barrel, a McMillan fiberglass stock, a Leupold 10X scope, a Harris bipod, and a fixed MIL-STD-1913 rail. The rifle has a 1.25 MOA accuracy with M852 ammunition.

Accessories: None

M82A1 Barrett Semiautomatic .50 cal Rifle

Ammunition: armor-piercing (M2), armor-piercing-incendiary (M8 & Mk 211), ball (M2 & M33)

Weapon Specifications NSN 1005-01-340-9519 Model M82A1 Barrett Manufacturer Barrett Manufacturing Caliber .50 Cal Mechanism type semi-automatic Magazine type detachable box Ammo capacity 10+1 rounds Rate of fire 20 shots per minute Weight (empty) 28.5 lbs Overall length 57 inches Barrel length 29 inches

Logistics: In-service Date 2002 Life expectancy 3,000 rounds Technical Manual # NA Operator Manual # COTS Manual

Discussion: The M82A1 Barrett semi-automatic .50 caliber rifle is a small arms designed to be deployed in areas requiring the anti-material capabilities of a .50 caliber M2 but lacking space or accessibility required for the M2 machinegun. The rifle has iron sights or can be deployed with various optical devices. The rifle will break into two major component groups with a maximum length of 38 inches. Accessories: 5 each 10-Round Magazines, Air/Water Tight Carrying Case, Cleaning Equipment

M60 Machine Gun

Ammunition: Individual Rounds 100 round Bandoleers M62, Tracer A111 all M82 M63, Dummy A127 mix of 4 M80 & 1 M62 M80, Ball A131 mix of 4 M80 & 1 M62 M80E1,Low flash ball A143 all M80 M82, blank A159 all M63 M993. Armor Piercing A255 mix of 4 M80E1 & 1 M62 AA04 mix of 4 M993 & 1 M62 AA35 mix of 4 M993 & 1M276

Weapon Specification NSN 1005-00-605-7710 Model M60 Basic Manufacturer Saco Def. Corp Caliber 7.62mm NATO Mechanism type Automatic Magazine type Bandoleer Ammo capacity 100 rounds Rate of fire 550 RPM Sustained Rate 100 RPM Weight (empty) 23 lbs. Overall length 43.5 inches

Logistics: In-service Date 1960 Life expectancy 25,000 rounds Technical Manual # TM 9-1005-224-24P Operator Manual # TM 9-1005-224-10

Discussion: The M60 7.62mm machine gun is a general purpose weapon capable of being fired from prone, standing and several mounts. The M60 is a watercraft, vehicle, tripod mounted or carried machine gun. Accessories: M13A1, BFA for M60, NSN:1005-00-140-3515, pn 12002981; Viewer Mount, NSN 5855-01-046-7272, PN SM-D-850340-1;Adapter for AN/PEQ-2, NSN 5340-01-362-9873, PN A3186952; Night Vision Sight AN/PVS-4, NSN 5855-00-629-5334

M60D Machine Gun

Ammunition: Individual Rounds 100 round Bandoleers M62, Tracer A111 all M82 M63, Dummy A127 mix of 4 M80 & 1 M62 M80, Ball A131 mix of 4 M80 & 1 M62 M80E1,Low flash ball A143 all M80 M82, blank A159 all M63 M993. Armor Piercing A255 mix of 4 M80E1 & 1 M62 AA04 mix of 4 M993 & 1 M62 AA35 mix of 4 M993 & 1M276

Weapon Specifications NSN 1005-00-909-3002 Model M60D Manufacturer Saco Def. Corp Caliber 7.62mm NATO Mechanism type Automatic Magazine type Bandoleer Ammo capacity 100 rounds Rate of fire 550 RPM Sustained Rate 100 RPM Weight (empty) 25 lbs. Overall length 43.5 inches

Logistics: In-service Date 1966 Life expectancy 25,000 rounds Technical Manual # TM 9-1005-224-24P Operator Manual # TM 9-1005-224-10

Discussion: The M60D 7.62mm machine gun is a general purpose weapon capable of being fired from several mounts. The M60D is an aircraft door mounted, watercraft mounted or vehicle mounted machine gun. Accessories: M13A1, BFA for M60D, NSN:1005-00-140-3515, pn 12002981; Viewer Mount, NSN 5855-01-046-7272, PN SM-D-850340-1;Adapter for AN/PEQ-2, NSN 5340-01-362-9873, PN A3186952; Night Vision Sight AN/PVS-4, NSN 5855-00-629-5334

M60E3 Machine Gun

Ammunition: Individual Rounds 100 round Bandoleers M62, Tracer A111 all M82 M63, Dummy A127 mix of 4 M80 & 1 M62 M80, Ball A131 mix of 4 M80 & 1 M62 M80E1,Low flash ball A143 all M80 M82, Blank A159 all M63 M993. Armor Piercing A255 mix of 4 M80E1 & 1 M62 AA04 mix of 4 M993 & 1 M62 AA35 mix of 4 M993 & 1M276

Weapon Specification NSN 1005-01-08-6259 Model M60E3 Manufacturer Saco Def. Corp Caliber 7.62mm NATO Mechanism type Automatic Magazine type Bandoleer Ammo capacity 100 rounds Rate of fire 550 RPM Sustained Rate 100 RPM Weight (empty) 18.5 lbs. Overall length 42.4 inches

Logistics: In-service Date 1985 Life expectancy 25,000 rounds Technical Manual # SW-361-AA-MMI-0/M60E3 Operator Manual # TM 02705E-10/1

Discussion: The M60E3 7.62mm machine gun is a lightweight weapon capable of being fired from standing or prone positions. The M60E3 is normally used in maneuvers were the weapon is carried by the operator. Accessories: MK164, BFA for M60E3, 1005-01-246-1002, PN 6086104; Viewer Mount, NSN 5855-01-046-7272, PN SM-D-850340-1;Adapter for AN/PEQ-2, NSN 5340-01-362-9873, PN A3186952; Night Vision Sight AN/PVS-4, NSN 5855-00-629-5334

Mk 43 Mod 0 Machine Gun

Ammunition: linked 100 round belts - A131 (4 M80 ball & 1 M62 tracer), A143 (M80 ball), A154 (M63 dummy), M82 blank.

Weapon Specifications NSN 1005-01-411-0224 Model Mk 43 Mod 0 Manufacturer Saco Inc. Caliber 7.62mm NATO Mechanism type full-auto gas operated Magazine type bandoleer Ammo capacity 100 rounds linked Rate of fire 550-650 rds per minute Weight (empty) 20 lbs 13 oz Overall length 37.7 or 42.2 inches Barrel length 17.1 or 21.6 inches

Logistics: In-service Date 1996 Life expectancy 25,000 rounds Technical Manual # SW370-XX-MMO-010 Operator Manual # SW370-AJ-OPI-010

Discussion: The Mk 43 is a gas-operated fully-automatic link-belt-fed machine gun. It fires from an open bolt and has a quick-change barrel with fixed headspace. It is a product-improved version of the M60E3 and comes with two barrel lengths under one NSN. Accessories: BFA, Combo Wrench, Extra Barrel

M240B Machine Gun


Weapon Specifications NSN 1005-01-412-3129 Model M240B Manufacturer FN Manufacturing Caliber 7.62×51 mm NATO Mechanism type gas, automatic Magazine type M13 disintegrating link belt Ammo capacity N/A Rate of fire 750 or 950 rds/min Weight (empty) 25 lbs. 13 oz Overall length 48 inches Barrel length 24.7 inches

Logistics: In-service Date 2002 Life expectancy 30,000 Technical Manual # TM 9-1005-313-23&P Operator Manual # TM 9-1005-313-10


M240N Machine Gun


Weapon Specifications NSN Model M240N Manufacturer FN Manufacturing Caliber 7.62×51 mm NATO Mechanism type gas, automatic Magazine type M13 disintegrating link belt Ammo capacity N/A Rate of fire 750 or 950 rds/min Weight (empty) Overall length 48 inches Barrel length 24.7 inches

Logistics: In-service Date 2002 Life expectancy 30,000 Technical Manual # TM 9-1005-313-23&P Operator Manual # TM 9-1005-313-10


M2HB Machine Gun - Fixed

Ammunition: armor-piercing (M2), armor-piercing-incendiary (M8 & Mk 211), armor-piercing-incendiary-tracer (M20), ball (M2 & M33), incendiary (M1 & M23), tracer (M1, M10 & M17), blank (M1A1), and dummy (M2).

Weapon Specifications NSN 1005-00-122-9368 LH 1005-00-122-9339 RH Model M2HB Fixed Manufacturer Saco Inc. Caliber .50 Mechanism type Full-auto recoil operated Magazine type Ammo can Ammo capacity 100 rounds linked Rate of fire 450-550 rds per minute Weight (empty) 84 lbs Overall length 65.0 inches Barrel length 39.8 inches

Logistics: In-service Date 1968 Life expectancy 50,000 rounds Technical Manual # SW361-AC-MMM-010 Operator Manual # SW361AB-MMO-010

Discussion: The M2HB is a recoil-operated fully-automatic link-belt-fed machine gun. It fires from a closed bolt position. Accessories: BFA, NVEO Gear, Extra Barrel

M2HB Machine Gun – Flexible

Ammunition: armor-piercing (M2), armor-piercing-incendiary (M8 & Mk 211), armor-piercing-incendiary-tracer (M20), ball (M2 & M33), incendiary (M1 & M23), tracer (M1, M10 & M17), blank (M1A1), and dummy (M2).

Weapon Specifications NSN 1005-00-322-9715 w/e 1005-00-726-5636 Model M2HB Flexible Manufacturer Saco Inc. Caliber .50 Mechanism type Full-auto recoil operated Magazine type Ammo can Ammo capacity 100 rounds linked Rate of fire 450-550 rds per minute Weight (empty) 84 lbs Overall length 65.13 inches Barrel length 45 inches


Discussion: The M2HB flexible is a recoil-operated fully-automatic link-belt-fed machine gun. It fires from a closed bolt position and can be set up for right or left-hand feed. This weapon provides suppression fire for offensive and defensive purposes. The picture above shows the M2HB flexible mounted in a ground tripod mount.

Accessories: BFA, NVEO Gear, Extra Barrel

M2HB Machine Gun - Soft Mount

Ammunition: armor-piercing (M2), armor piercing incendiary (M8 & Mk 211), armor-piercing-incendiary-tracer (M20), ball (M2 & M33), incendiary (M1 & M23), tracer (M1, M10 & M17), blank (M1A1), and dummy (M2).

Weapon Specifications NSN 1005-00-343-0747 Model M2HB Soft Mount Manufacturer Saco Inc. Caliber .50 Mechanism type Full-auto recoil operated Magazine type Ammo can Ammo capacity 100 rounds linked Rate of fire 450-550 rds. per minute Weight (empty) 84 lbs. Overall length 65.13 inches Barrel length 45.0 inches


Discussion: The M2HB fixed is a recoil-operated fully automatic link-belt-fed machine gun. It fires from a closed bolt position and can be set up for right or left-hand feed. This weapon provides suppression fire for offensive and defensive purposes.


GAU-16 Machine Gun


Weapon Specifications NSN 1005-01-250-5782 Model GAU-16 Manufacturer Saco Inc. Caliber .50 Mechanism type Full-auto recoil operated Magazine type Ammo can Ammo capacity 100 rounds linked Rate of fire 750-850 rds. per minute Weight (empty) 61 lbs. Overall length 56.25 inches Barrel length 36 inches

Logistics: In-service Date Life expectancy 50,000 rounds Technical Manual # Operator Manual #

Discussion: The GAU16 fixed is a recoil-operated fully automatic link-belt-fed machine gun. It fires from a closed bolt position and can be set up for right or left-hand feed. This weapon provides suppression fire for offensive and defensive purposes.

Accessories: BFA, NVEO Gear

XM218 Machine Gun


Weapon Specifications NSN 1005-00-165-4561 Model XM218 Manufacturer Saco Inc. Caliber .50 Mechanism type Full-auto recoil operated Magazine type Ammo can Ammo capacity 100 rounds linked Rate of fire 750-850 rds. per minute Weight (empty) 65 lbs. Overall length 56.25 inches Barrel length 36 inches

Logistics: In-service Date Life expectancy 50,000 rounds Technical Manual # NAVAIR 11-95-13 Operator Manual #

Discussion: The XM218 is a recoil-operated fully automatic link-belt-fed machine gun. It fires from a closed bolt position and can be set up for right or left-hand feed. This weapon provides suppression fire for offensive and defensive purposes.


M203 Grenade Launcher

Ammunition: B504 Green Star, B505 red Star, B506 Red Smoke, B508 Green Smoke, B509 Yellow Smoke, B519 practice, B534 MP, B535 White Star, B536 White Star cluster, B546 HEDP, B567 & BA05 CS, B568 HE, B569 HE, and B577 TP.

Weapon Specifications NSN 1010-00-179-6447 Model M203 Manufacturer Colt’s Mfg. Co. Caliber 40mm low velocity Mechanism type Single-shot Magazine type N/A Ammo capacity 1 round Rate of fire N/A Weight (empty) 3 lbs Overall length 16.0 inches Barrel length 12.0 inches

Logistics: In-service Date 1971 Life expectancy 10,000 rounds Technical Manual # SW370-AE-MMI-010 Operator Manual # TM 9-1010-221-10

Discussion: The M203 is a single-shot breech-loaded grenade launcher that fires low-velocity 40 mm grenade rounds and is designed to attach to the M4 Carbine and M16 families.

Accessories: None.

M79 Grenade Launcher

Ammunition: B504 Green Star, B505 red Star, B506 Red Smoke, B508 Green Smoke, B509 Yellow Smoke, B519 practice, B534 MP, B535 White Star, B536 White Star cluster, B546 HEDP, B567 & BA05 CS, B568 HE, B569 HE, and B577 TP.

Weapon Specifications NSN 1010-00-691-1382 Model M79 Manufacturer various Caliber 40mm low velocity Mechanism type single-shot break-open Magazine type N/A Ammo capacity 1 round Rate of fire N/A Weight (empty) 5 lbs 15 oz Overall length 28.8 inches Barrel length 14.0 inches

Logistics: In-service Date 1960 Life expectancy 10,000 rounds Technical Manual # SW370-BD-OPI-24 Operator Manual # TM 9-1010-205-10

Discussion: The M79 is a single-shot break-open grenade launcher that fires the low-velocity 40mm grenade rounds

Accessories: Sling

Mk19 Mod 3 40mm Machine Gun

Ammunition: high-explosive (M383 & M384), practice (M385 & M918), high-explosive dual-purpose (M430), and dummy (M922).

Weapon Specifications NSN 1010-01-126-9063 Model Mk 19 Mod 3 Manufacturer Saco Inc. Caliber 40mm high-velocity Mechanism type full-auto blowback op. Magazine type ammo can Ammo capacity 48 or 32 rounds linked Rate of fire 325-375 rds per minute Weight (empty) 77.6 lbs Overall length 43.1 inches Barrel length 16.25 inches

Logistics: In-service Date 1981 Life expectancy 25,000 rounds Technical Manual # SW363-C3-MMM-020 Operator Manual # SW363-C3-MMM-010

Discussion: The Mk 19 Mod 3 is an air-cooled, blowback-operated, link-belt-fed, vehicle or ground-mounted machine gun. It fires grenades from the open bolt position and is left-hand feed only.

Accessories: None

60 mm M224 Mortar

Ammunition: M49 HE M83 Illum M302 Smoke M302E1 Smoke

Weapon Specifications NSN 1010-01-020-5626 Model M224 60 mm Mortar Manufacturer various Caliber 60mm Mechanism type Muzzle loaded Magazine type N/A Ammo capacity 1 round Rate of fire 20 rounds/min Weight (empty) 46.5 pounds Overall length 40 inches Barrel length N/A

Logistics: In-service Date Life expectancy NA Technical Manual # TM 9-1010-223-10 Operator Manual # TM 9-1010-223-23&P

Discussion: The MK224 60mm mortar is a man portable mortar. It is drop fired. In combat, this weapon is effective in bombardment, laying smoke screens and providing night-time illumination. Accessories: M64/M64A1 SIGHT UNIT

STAND FOR SMALL ARMS MOUNTS

Listed below and contained in this section, is the conventional Navy stand assembly for the mounts that are supported through the Weapons Department at Crane.

MK16 MOD2 Stand Assembly Tripod MK16 MOD8 Stand

Accessories

GUN

MOUNT

STAND

ASSEMBLY

MK16 MOD 2 STAND ASSEMBLYThe MK16 MOD 2 is a stainless steel fabricated assembly that is the basic and most often used stand configuration for mounting most conventional small arm weapons on shipboard platforms. The assembly consists of two main parts, the MK16 MOD 8 stand and the tripod. The stand can be mounted independent of the tripod as well.

CHARACTERISTICS:

Tripod (alone):

Dimensions : 20.84X20.84X33.54

Weight: 44.5 lbs.

NSN: 1005-01-325-5479

Stand (alone):

Dimensions: 5.25X5.25X8.25

Weight: 11.5 lbs.

NSN: 1005-01-323-7551

MK16 MOD 2 Stand Assembly (combined)

NSN: 1005-00-140-7635

Various stops, adaptors, and stow lock hardware are used in conjunction with the MK16 MOD 8 stand. Most Army and Navy small arms mounts are secured through use of a pintle, or shaft, that is fixed to the bottom of the mounts, yet pivots in its corresponding stand. Typically the Army uses a small pintle while the Navy uses a large pintle. Most train stops are set upon installation, while others need to be adjustable for deployment on other platforms. Likewise, stow locks for various mounts change in configuration from mount to mount or platform to platform. Below is a list of some of these accessories:

PINTLE ADAPTER ASSEMBLY

ADJUSTABLE TRAIN STOP ASSEBBLY

UNIVERSAL TRAIN STOP ASSEMBLY

TRAIN LOCK ADAPTER ASSEMBLY

IN-SERVICE MOUNTS Listed below and contained in this section, are the conventional Navy, NAVAIR and Naval Special Warfare mounts that are supported through the Weapons Department at Crane.

MK26 .50 caliber Soft Mount

MK38 25MM Machine Gun System

MK44 7.62MM Gatling Gun Weapon System

MK58 7.62MM Gun Mount

MK64 Gun Mount


MK93 Gun Mount

MK94 .50 caliber Gun Mount

MK95 twin .50 caliber Gun Mount


MK98 Universal Gun Mount

MK99 twin 7.62MM Gun Mount

MK123 Ground Tripod

MK125 Ground Tripod

MK26 SOFT MOUNT

MK26 MOD 17 (SOFT)

NSN: 1005-01-318-6515

MK26 MOD 8 (HARD)

NSN: 1005-00-879-2819

MK26 SYSTEM CHARACTERISTICSWeapon------------------.50 CAL M2HB Machine Gun

Weight--------------------176 lbs. (Less Gun & Ammo)

288 lbs. (With Gun & Ammo)

Ready Ammo------------100 Rounds

Recoil Force--------------700 lbs.

Working Circle-----------53 inches (Radius)

Operation------------------Manual

Depression-----------------24º Max

Elevation-------------------76º Max

The MK26 Gun Mount has been in service for many years. Two configurations remain, a hard and soft mount. The hard mount absorbs the full recoil of a standard M2HB, while the soft mount reduces the recoil to allow for better operator control and lower mounting stresses. Both mounts can be furnished with or without ballistic shields.

MK38MACHINE GUN SYSTEM

The MK38 25MM Machine Gun System (MGS) is comprised of the M242 25MM Automatic Gun and the MK88 Gun Mount. The purpose of this system is to provide a safe, reliable, and effective minor caliber gun capability to Fleet units. The 1300 pound, deck mounted system is manually trained and elevated by an operator, and is capable of firing NATO standard M790 series ammunition and the Navy MK210 HEI-T round. The system fires at a rate of 175 rounds per minute and fully loaded holds 170 rounds in the ammunition container and feed chute.

ITEM P/N NSN

MK38 25MM Machine Gun System 6086165 1005-01-281-9553

M242 25MM Automatic Gun 12524000 1005-01-086-1400

MK88 Machine Gun Mount 5985155 1005-01-228-2444

MK218 Power & Control Unit 6085979 6130-01-221-4089

MK38 CHARACTERISTICSMK88 MOUNT ASSEMBLY

LENGTH:---------------------------63”

WIDTH:-----------------------------55.5”

HEIGHT:---------------------------56”

WORKING CIRCLE :----------- 77” RADIUS TO MUZZLE

44” RADIUS TO SHOULDER RESTS

RECOIL FORCE:----------------- 12,000 LBS.

MK44 GUN WEAPON SYSTEM

CHARACTERISTS

Assembly drawing No: 7082595

Ammunition weight----------------------------------------90lbs.

Maximum travel (degrees):

Elevation:----67 Depression:------27 Train:-----**360

Shipping Container: Weight with mount (lbs): 80

Size (HXWXL) (FEET): 1.0X2.0X2.0 Cubic Feet: 4

System Information:

Weight with gun(s) and ready ammunition (lbs): (1,500 rnds) 210

Height (inches) to gun bore centerline: 14

Radius (inches) to muzzle-end of gun: 22

Radius (inches) to grip-end of gun: 14

Recoil force: 300 lbs.

•** Limited by train stops to craft installation requirements.

DESCRIPTION

The MK44 MOD 0 Gun Weapon System is a complete weapon system. It contains the weapon, the gun control unit, all the attaching hardware and cabling. It may be powered from any 24 VDC source capable of supplying 2500 watts of power. It has an interchangeable pintle which enables it to be mounted on a variety of platforms. The ammunition is supplied through a flexible feed chute enabling the weapon system to be fed from a remote ammunition storage system. The rate of fire is controlled by the gun control unit which is attached to the mount. Feedback from the gun drive motor supplies speed information to the gun control unit to maintain constant speed under varying load conditions. The attached trigger box assembly provides either right or left hand operation.

MK44 MOD 0

NSN: Not as yet applied for.

MK 58 GUN MOUNT

MK58

NSN’S

MOD 5: 1005-00-139-5600

MOD 11: 1005-LL-L99-7133

MK58 CHARACTERISTICSWeight with guns & ready ammo:----------------55

(200 rnds)

Height (Inches) to gun bore centerline:----------15

Radius (Inches) to muzzle-end of gun:----------- 34

Radius (Inches) to grip-end of gun:---------------19

Recoil force:------------------------------------------- 300 lbs.

Elevation:-----80 Depression:-----25 Train:----360

The MK58 Gun Mount consists of the assemblies shown above. It is used to mount a M60 Basic 7.62MM Machine Gun, (some versions of the mount also use a M60D). The mount is used in tight spaces with low shock and environmental conditions.

MK58 MOD 5

MK58 MOD 11

MK 64 GUN MOUNT

The MK64 Mount consists of the following assemblies and can be used in vehicle (MOD 4) or shipboard ( MOD 8) configurations. The mount primarily supports a MK19 MOD 3 grenade launcher with either the 32 or 48 round ammunition containers. With the proper adapters installed, the mount can also support a M60 or a M2 Machine Gun.

MK64

NSN MOD 4:

1010-01-128-4934

NSN MOD 8:

1010-01-179-7615

MK64 CHARACTERISTICS

Elevation:--------------------------------------------------------------------70

Depression:------------------------------------------------------------------70

Train:-------------------------------------------------------------------------360

Weight with gun and ready ammo:--------------------------------------100-122 lbs.

Height (Inches) to gun bore centerline:---------------------------------49-52”

Radius (Inches) to muzzle-end of gun:----------------------------------22-38”

Radius (Inches) to grip-end of gun:--------------------------------------21.5-28”

Recoil force:----------------------------------------------------------------300-1000 lbs.

MK82 GUN MOUNT

The MK82 Gun Mounts consist of the assemblies shown below. The mount in the MOD 2 configuration is constructed of stainless steel. The MK82 Mount is used to mount a single 7.62 M60 Basic Machine Gun, with either 200 or 600 rounds of ammunition. The MK82 is used in high shock and environmental conditions.

MK82

NSN’S:

MOD 0 (CARBON STEEL)

1005-01-069-2477

MOD 1 (WITHOUT SHIELD)

1005-01-187-5231

MOD 2 (AS SHOWN)

1005-LL-LT5-8715

MK82 CHARACTERISTICSWeapon:----------------------------------------------------------------------------------------------- M60 Basic

Weight with gun and ammo:----------------------------------------------------------------------- 210 lbs. (200 rnds)

Height to gun bore centerline:--------------------------------------------------------------------- 56”

Radius to muzzle-end of gun:---------------------------------------------------------------------- 36”

Radius to grip-end of gun:-------------------------------------------------------------------------- 19”

Recoil force:------------------------------------------------------------------------------------------ 150 lbs.

Elevation:--------------------------------------------------------------------------------------------- 45º

Depression:------------------------------------------------------------------------------------------- 15º

Train:-------------------------------------------------------------------------------------------------- 360º

MK93 GUN MOUNT

CHARACTERISTCSWORKING CIRCLE: ----------72”

WEIGHT:------------------------ 32 lbs. W/GUN/AMMO 165LBS

TRAIN:--------------------------+/- 180 DEGREES

ELEVATION:------------------ 67 DEGREES

DEPRESSION:----------------- 27 DEGREES

RECOIL FORCE:-------------- 615 LBS.

AMMUNITION CAPACITY:

.50 CAL 100 RNDS

40MM 48 RNDS

7.62MM 200 RNDS

DESCRIPTION

The purpose of the MK93 Gun Mount is to provide a means of training and elevating one of four small arms weapons when installed on the host platform. The MK93 Gun Mount consists of a carriage assembly, cradle assembly, .50 Caliber ammunition container holder or 40MM bracket mounting assembly, small or large pintle, stowage bar assembly and train stops. The MK93 Gun Mount can be configured to mount either the MK19 40MM Grenade Launcher, the M2HB .50 Caliber Machine Gun, or with the proper adapter installed, either the M240 or M60 7.62MM Machine Guns. The MK93 Gun Mount can be installed on a conventional MK16 stand assembly, or adapted to conventional ground tripods. The MK93 Gun Mount is fabricated from aluminum and stainless steel materials and has been through complete MIL-SPEC safety testing and qualification. The MK93 Gun Mount is nowin use throughout the Army, USSOCOM and the Marine Corps.

MK93 MOD 1

NSN: 1005-01-383-2757

MK93 MOD 2

NSN: 1010-01-LT4-9917

MK94 GUN MOUNT

DESCRIPTION

NSWC Crane has recently designed an armament system which will allow the use of a GAU-16 .50 Caliber Machine Gun from the SH-60B, H, and F aircraft. The new armament system incorporates the MK94 Gun Mount, which utilizes “softmount” technology. The use of the MK94 Gun Mount reduces the recoil of the weapon transmitted to the airframeto approximately 350 pounds. This armament system has been thoroughly tested and has received flight certification by the Naval Air Warfare Center Patuxent River. Sixty (60) systems have been procured for the H60 community.

MK94 Mod 0

NSN: 1005-LL-LT7-3596

MK94 MOD 1

NSN: 0098-LL-H79-1532

MK94 CHARACTERISTICSWeapons suites:----------------------------------------------- .50 Cal GAU-16

Dimensions:--------------------------------------------------- 30”x18”x18”

Weight:

• less gun and ammo-------------------------------------- 31 lbs.

• with gun and ammo--------------------------------------124 lbs.

Ammunition capacity:--------------------------------------- 100 rnds.

Depression:---------------------------------------------------- -41 to +1 degrees

Azimuth:------------------------------------------------------- up to 360 degrees

Power requirements:----------------------------------------- none

Recoil force:-------------------------------------------------- 360 lbs.

MK95

GUN

MOUNT

The MK95 MOD 1 Machine Gun Mount is used to mount two .50 Caliber M2HB Machine Guns, resulting in a weapon system firing rate of about 1,000 rounds per minute, or two GAU-16 Machine Guns resulting in a weapon system firing rate of about 1600 rounds per minute. When installed, each weapon is “soft-mounted” via a shock absorber to reduce transmitted weapon recoil and increase gunner controllability and hit probability. The mount has an ammunition capacity of 500 rounds (250 rounds per weapon) and is fabricated from corrosive resistant aluminum and stainless steel materials. The MK95 MOD 1 mount is usually shipboard mounted via a deck-mounted tripod and MK16 MOD 8 stand assembly. However, the mount can be adapted to any boat or vehicle that uses a MK16 MOD 8 stand. If desired, the mount can also be provisioned with an armament shield assembly.

MK95 MOD 1 SYSTEM CHARACTERISTICS

Weapons suites:-----------------------.50 Cal M2HB, .50 Cal GAU-16

Dimensions:-----------------------------32” (L)x50”(W)x18”(H)

Weight:

• with M2HB guns, ammo,and shield--------400 lbs.

• GAU-16 guns and ammo--------------------- 307 lbs.

• GAU-16 guns, ammo, and shield----------- 362 lbs.

• less guns, ammo,and shield------------------108 lbs.

• with M2HB guns and ammo----------------- 345 lbs.

Ammunition capacity:--------------------500 rnds (250 rnds each gun)

Elevation:---------------------------------- -15 to+65 Degrees

Azimuth:------------------------------------ up to 360 degrees

Power requirements:--------------------- none

Recoil force:-------------------------------- 570 lbs.

MK95 MOD 0NSN: 1005-01-437-0507

(200 RNDS)

MK95 MOD 1NSN: 1005-01-437-0504

(500 RNDS)

MK97 GUN MOUNT

MK97 MOD 0

The MK97 MOD 0 Machine Gun Mount is used to mount a M240G Machine Gun. The weapon is hard mounted in the MK97 MOD 0. The ammunition capacity for the mount is 200 rounds, or expandable to 600 rounds. The mount is a stainless steel mount and can use either the standard large Navy pintle or the small Army pintle. The mount can be easily adapted to any boat or vehicle that uses a MK16 MOD 8 stand or small pintle adapter. A shield assembly can also be added if desired.

MK97 MOD 0 System Characteristics

Weapon suites---------------------------------M240G

Dimensions--------------------------------------14.5”x11”x12.5”

Weight (without shield assembly)---57 pounds

-with gun and ammo (200 rnds)

Ammunition capacity----------------------200 or 600 rnds

Depression-------------------------------------+60 to -25

Azimuth------------------------------------------up to 360 degrees

MK97 MOD 0

NSN: 1005-LL-LU2-4357

MK99

GUN MOUNT

MK99 MOD 0

NSN: 1005-LL-L99-5986

(200 ROUND CONTAINER)

MK99 MOD 1

NSN: 1005-LL-L99-5987

(600 ROUND CONTAINER)

MK99 MOD 0 SYSTEM CHARACTERISTICS

Weapons suites--------------------M240G

Dimensions------------------------29”X12.5”X12.5”

Weight (with 200 round cans)

*with guns and ammo ------112 lbs.

Ammunition capacity-----------400 or 1200 rnds

Elevation---------------------------+60 to –25 degrees

Azimuth---------------------------up to360 degrees

DESCRIPTION

The MK99 MOD 0 Machine Gun Mount is used to mount two M240 Machine Guns. This system has a combined firing rate of 1600 rounds/minute with each gun having a rate of 800 rounds/minute. The weapons are hard mounted in the MK99 MOD 0 and the ammunition capacity for the mount is 200 rounds/gun or 400 total ammunition capacity. There is also the increased ammunition capacity of 600 rounds/gun or 1200 rounds total ammunition capacity. The mount is a stainless steel mount and is mounted using either the standard large Navy pintle or the small Army pintle. The mount can be easily adapted to any boat or vehicle that uses a MK16 MOD 8 stand or small pintle adapter.

MK123 MOD 0

GROUND TRIPOD STAND

MK123 MOD 0

NSN: 1005-LL-LT3-5196

DESCRIPTION MK123 MOD 0

The MK123 Mod 0 Ground Tripod Stand is a lightweight replacement for the existing M3 Ground Tripod. The MK123 Mod 0 will accept the same mounts as the M3 Tripod (MK93, MK64).


Weight: 19 lbs. (M3 Tripod-44 lbs.)

Part No: 6649906 (53711)

MK125 MOD 0GROUND TRIPOD STAND

DESCRIPTION MK125 MOD 0

The MK125 MOD 0 Ground Tripod Stand is a lightweight replacement for the existing M122 Ground Tripod. The MK125 MOD 0 will accept the same mounts as the M122 Tripod (M60 or M240 weapon mounts).


Weight:------------7 lbs.

(M122 Tripod 12.5 lbs.)

Part No:----------- 6650727

(53711)

MK125 MOD 0

NSN: Not Yet Requested.

1

HOW DO I REQUISITION

SMALL ARMS/WEAPONS/MOUNTS AS INITIAL ISSUE?

1. Your request must fall under one of the following situations:

A. New Allowance B. Approved allowance increase C. Have unissued weapons on an existing allowance D. Be a new standard item

2. COST? None, all items are free issue. 3. Submit 80 column MILSTRIP requisition to Routing Identifier N35 for each stock number

citing Advice Code “5D”. Commanding Officer Naval Inventory Control Point (Code 05612) Mechanicsburg, PA 17055-0708 For assistance please contact Ms. Dee Haywood at: Phone: DSN 482-1780, Commercial 812-854-1780 FAX: DSN 482-2653, Commercial 812-854-2653 Email: [email protected] 4. Reference: NAVSEAINST 8370.2 Paragraph 3-401 5. Need help? Contact NAVSURFWARCENDIV Crane, Code 4086, either: Ms. Martha Dyer at: Phone: DSN 482-5772, Commercial 812-854-5772 FAX: DSN 482-1221, Commercial 812-854-1221 Email: [email protected] OR Ms. Ranee Kelly at: Phone: DSN 482-5863, Commercial 812-854-5863 FAX: DSN 482-1221, Commercial 812-854-1221 Email: [email protected]

NAVAL SURFACE WARFARE CENTER CRANE DIVISION, CRANE, INDIANA 47522-5001

2

HOW DO I REQUISITION

SMALL ARMS/WEAPONS/MOUNTS AS REPLACEMENTS?

1. Submit 80 column MILSTRIP requisition for each stock number to Routing Identifier N35: Commanding Officer Naval Inventory Control Point (Code 05612) Mechanicsburg, PA 17055-0708 For assistance please contact Ms. Dee Haywood at: Phone: DSN 482-1780, Commercial 812-854-1780 FAX: DSN 482-2653, Commercial 812-854-2653 Email: [email protected] 2. COST? None, all items are free issue. 3. On that MILSTRIP, cite Advice Codes as follows: 5A If weapon being replaced was a surveyed item 5G If weapons to be replaced have already been returned 5S If weapons are being held pending receipt of replacements 4. Reference: NAVSEAINST 8370.2, Paragraph 3-402 5. Need help? Contact NAVSURFWARCENDIV Crane, Code 4086, either: Ms. Martha Dyer at: Phone: DSN 482-5772, Commercial 812-854-5772 FAX: DSN 482-1221, Commercial 812-854-1221 Email: [email protected] OR Ms. Ranee Kelly at: Phone: DSN 482-5863, Commercial 812-854-5863 FAX: DSN 482-1221, Commercial 812-854-1221 Email: [email protected]

NAVAL SURFACE WARFARE CENTER CRANE DIVISION, CRANE, INDIANA 47522-5001

3

HOW DO I ESTABLISH AN ALLOWANCE FOR SMALL ARMS/WEAPONS/MOUNTS?

1. Determine your needs. 2. Put your request in a letter or message to the following address via your operational chain of

command with a copy to NAVSURFWARCENDIV Crane (Code 4086).

COMMANDER NAVAL SEA SYSTEMS COMMAND ATTN PMS325J 1333 ISSAC HULL AVENUE SE STOP 2601 WASHINGTON NAVY YARD, DC 20376-2601

3. Your request MUST state:

a. Quantity required b. Nomenclature c. Unit Identification Code (UIC) d. Name of point of contact e. Phone number of point of contact f. National Stock Number (NSN) g. Justification for allowance

4. You will be notified of approval or disapproval; and if approved, a Small Arms Allowance

List will be issued to you. 5. Reference: NAVSEAINST 8370.2 Paragraph 3-202 6. Need help? Contact NAVSURFWARCENDIV Crane, Code 4086, either: Ms. Martha Dyer at: Phone: DSN 482-5772, Commercial 812-854-5772 FAX: DSN 482-1221, Commercial 812-854-1221 Email: [email protected] OR Ms. Ranee Kelly at: Phone: DSN 482-5863, Commercial 812-854-5863 FAX: DSN 482-1221, Commercial 812-854-1221 Email: [email protected]

4

HOW DO I CHANGE AN EXISTING ALLOWANCE

FOR SMALL ARMS/WEAPONS/MOUNTS?

1. Determine your needs. 2. Put your request in a letter or message to the following address via your operational chain of

command with a copy to NAVSURFWARCENDIV Crane (Code 4086).

COMMANDER NAVAL SEA SYSTEMS COMMAND ATTN PMS325J 1333 ISSAC HULL AVENUE SE STOP 2601 WASHINGTON NAVY YARD, DC 20376-2601

3. Your request MUST state:

a. Nomenclature b. National Stock Number (NSN) c. Present Allowance d. Revised allowance quantity total e. Justification including statement that the change is consistent with your wartime

mission f. Unit Identification Code (UIC) g. Name of point of contact h. Phone number of point of contact

4. You will be notified of approval or disapproval; and if approved, an updated Small Arms

Allowance List will be issued to you. 5. Reference: NAVSEAINST 8370.2 Paragraph 3-210 6. Need help? Contact NAVSURFWARCENDIV Crane, Code 4086, either: Ms. Martha Dyer at: Phone: DSN 482-5772, Commercial 812-854-5772 FAX: DSN 482-1221, Commercial 812-854-1221 Email: [email protected] OR Ms. Ranee Kelly at: Phone: DSN 482-5863, Commercial 812-854-5863 FAX: DSN 482-1221, Commercial 812-854-1221 Email: [email protected]

5

WHERE AND HOW DO I RETURN

EXCESS SMALL ARMS/WEAPONS/MOUNTS?

1. Immediately, as soon as small arms, weapons and mounts are determined to be excess – or

are recognized to be in excess of your small arms allowance, all activities will turn them in. 2. These items will be shipped directly to:

RECEIVING OFFICER CODE 11322 BLDG 2522 NAVSURFWARCENDIV CRANE 300 HIGHWAY 361 CRANE, IN 47522-5001

Ship items according to Physical Security Regulations for Security Risk Category Code of

the items. 3. The shipping activity will forward a legible copy of the shipping document (Form DD 1149

or Form DD 1348-1) listing serial number, by means of a FAX, to Crane, Code 4086, FAX DSN 482-1221; Commercial 812-854-1221. Or mail a copy to:

COMMANDER CODE 4086 NAVSURFWARCENDIV CRANE 300 HIGHWAY 361 CRANE, IN 47522-5001 4. Reference: NAVSEAINST 8370.2, Paragraphs 3-701 and 3-800. For questions on

transportation issues, you may call Ms. Dee Haywood, NAVSURFWARCENDIV Crane, Code 1133, DSN 482-1780, Commercial 812-854-1780.

5. Need help? Contact NAVSURFWARCENDIV Crane, Code 4086, either: Ms. Martha Dyer at: Phone: DSN 482-5772, Commercial 812-854-5772 FAX: DSN 482-1221, Commercial 812-854-1221 Email: [email protected] OR Ms. Ranee Kelly at: Phone: DSN 482-5863, Commercial 812-854-5863 FAX: DSN 482-1221, Commercial 812-854-1221 Email: [email protected]

6

YOU MUST REPORT SMALL ARMS

RECEIPT AND TURN-IN

1. Reference NAVSEAINST 8370.2 Section 3-500 2. If you are shipping weapons, you must forward a legible copy of the DD 1348-1 or DD 1149

shipping document listing serial numbers by fax to the Navy Registry for Small Arms at Crane, Code 4086 at DSN 482-1221 or Commercial 812-854-1221 or by mail to:

COMMANDER CODE 4086 BLDG 2521 NAVSURFWARCENDIV 300 HIGHWAY 361 CRANE, IN 47522-5001 3. If you are receiving weapons, you must forward a legible signed copy of the DD 1348-1 or

DD 1149 shipping document. This document must display each serial number under the proper Nomenclature and National Stock Number (NSN). You may fax to the number in paragraph 2 above or mail to the above address.

4. NOTE: Due to the sensitive nature and the security risk category of small arms, you must

ensure that every degree of caution is taken to report small arms. At the first indication of non-receipt of a shipment of small arms, be familiar with the reporting requirements of the report of shipment (REPSHIP) – If shipment is not received within 48 hours of ETA, notify NAVSURFWARCENDIV Crane Small Arms Inventory Manager, Ms. Dee Haywood at DSN 482-1780 or Commercial 812-854-1780 or FAX DSN 482-2653 or Commercial 812-854-2653. All missing weapons must be reported on DD 200 forms for Financial Liability of Property Loss through your Chain of Command with a copy to Code 4086, Crane, as in paragraph 2 above.

The 48 hour reporting required for Cat II weapons is covered as an OPREP3 Navy Blue report in OPNAVINST 3100.6G.

5. For questions regarding serial number reporting of Small Arms, call Ms. Debbie Bough,

DSN 482-5738 or Commercial 812-854-5738 or Ms. Martha Riggins, DSN 482-5845 or Commercial 812-854-5845 or at FAX # referenced in paragraph 2 above.

7

FACTS ABOUT SMALL ARMS AND ORGANIZATIONAL MAINTENANCE

AS A RESULT OF VARIOUS FLEET ACTIVITIES CALLING TO DISCUSS THEIR INABILITY

OR LACK OF AUTHORITY TO REQUISITION AND REPLACE PARTS ON SMALL ARMS AND SMALL

ARMS MOUNTS, THE FOLLOWING CLARIFICATION IS PROVIDED.

ALL NAVY ACTIVITIES HOLDING AN ALLOWANCE FOR SMALL ARMS ARE AUTHORIZED

TO PERFORM ORGANIZATIONAL LEVEL MAINTENANCE. THIS IS IN ADDITION TO NORMAL

PREVENTIVE MAINTENANCE COVERED BY MAINTENANCE REQUIREMENT CARDS. THE

GUIDING DOCUMENT FOR DETERMINING IF LOST OR FAILED PARTS CAN BE REQUISITIONED

AND REPLACED AT THE ORGANIZATIONAL LEVEL IS THE ALLOWANCE PARTS LIST (APL) FOR

THE WEAPON.

THE APL CONTAINS AN ENTRY CALLED THE SOURCE MAINTENANCE AND

RECOVERABILITY (SMR) CODE. A TYPICAL SMR CODE WOULD BE PAOZZ. THE “PA” IS THE

SOURCE CODE AND IS ALWAYS THE FIRST TWO LETTERS. “PA” MEANS THE PART IS STOCKED

AND ISSUED BY THE REGULAR STOCK SYSTEM AND IS OBTAINED BY A FUNDED REQUISITION.

THE THIRD ENTRY IN THE EXAMPLE, “O”, IS THE MAINTENANCE CODE. THE “O” MEANS THE

PART CAN BE REMOVED, REQUISITIONED AND REPLACED AT THE ORGANIZATIONAL LEVEL.

AN O OR 2 - 6 IN THIS POSITION MEANS THAT ORGANIZATIONAL LEVEL MAINTENANCE CAN

REQUISITION AND REPLACE THE PART. ANY OTHER ENTRY SUCH AS “F”, “G”, “H” OR “D”

MEANS ORGANIZATIONAL MAINTENANCE IS NOT AUTHORIZED TO REQUISITION AND

REPLACE THE PART. THE FOURTH AND FIFTH ENTRIES IN THE EXAMPLE, “ZZ”, MEANS THE

PART IS NOT REPAIRABLE AND IS A THROW AWAY ITEM. FOR COMPLETE DESCRIPTION OF

SMR CODES SEE NAVSUPINST 4423.14B.

PARTS CODED WITH A “PA” SOURCE CODE AND AN ORGANIZATIONAL LEVEL

MAINTENANCE CODE CAN BE REQUISITIONED THROUGH THE REGULAR STOCK SYSTEM.

COSTS FOR THE PARTS ARE PAID BY THE REQUISITIONING ACTIVITY.

8

WEAPONS WHICH HAVE MISSING OR DEFECTIVE PARTS, NOT CODED FOR

ORGANIZATIONAL LEVEL MAINTENANCE, MUST BE REPLACED BY REQUISITIONING

REPLACEMENT WEAPONS FROM NAVY INVENTORY CONTROL POINT (NICP) MECHANICSBURG

PA.

BELOW ARE LISTED THE APL NUMBERS FOR THE COMMON SMALL ARMS HELD BY

NAVY ACTIVITIES. COPIES OF APL’S ARE AVAILABLE VIA THE GENERAL DISTRIBUTION

ALLOWANCE PARTS LISTS COMPACT DISK SYSTEM, DISTRIBUTED BY NICP, AS A PART OF THE

NICP FLEET SUPPORT TOOL KIT. THIS SYSTEM CAN BE INQUIRED BY APL NUMBER OR BY

NATIONAL STOCK NUMBER. IF THE CD SYSTEM IS NOT AVAILABLE LOCALLY, NICP

REPRESENTATIVE MR. GEORGE RYKOSKEY, CAN BE CONTACTED AT DSN 430-7392 TO OBTAIN

APL’S OR CONTACT ONE OF THE IN-SERVICE ENGINEERING AGENTS FOR SMALL ARMS LISTED

ON THE POINT OF CONTACT PAGE.

M1911A1 PISTOL

M16A1 RIFLE

M14 RIFLE

MOSS 500A1 SHOTGUN

REM 870 SHOTGUN

M203 GRENADE LAUNC

M2HB SOFT MOUNT MG

MK26-17 MG MOUNT

M122 TRIPOD

006400013

006400171

006400060

006400437

006400311

006400295

006400415

006400412

006400405

M9 PISTOL

M16A3 RIFLE

MOSS 500 SHOTGUN

MOSS 500A2 SHOTGUN

M79 GRENADE LAUNC

M60 MACHINE GUN

MK26-16 MG MOUNT

MK58-5 MG MOUNT

M11 PISTOL

006400403

006400422

006400379

006400438

006400137

006400307

006400399

006400332

006400442

9

SMALL ARMS WEAPONS BRANCH – CODE 4081

NAVAL SURFACE WARFARE CENTER, CRANE DIVISION

POINTS OF CONTACT POC (PHONE EXTENSION) E-MAIL ADDRESS BRANCH MANAGER ............................................................. CHUCK ZELLER (5767) [email protected] PISTOLS & REVOLVERS........................................................ TERRY O’BRIAN (5831) [email protected] PAUL HILL (5793) [email protected] SUBMACHINE GUNS............................................................. PAUL HILL (5793) [email protected] GENE O’BRIAN (5830) [email protected] RIFLES, CARBINES & GRENADE LAUNCHERS............... TERRY O’BRIAN (5831) [email protected] PAUL HILL (5793) [email protected] SHOTGUNS............................................................................... TERRY O’BRIAN (5831) [email protected] PAUL HILL (5793) [email protected] M60, MK43 & M240 MACHINE GUNS................................ SCOTT ROSS (5849) [email protected] PAUL HILL (5793) [email protected] M2HB .50 CAL MACHINE GUNS ......................................... GENE O’BRIAN (5830) [email protected] XM218/GAU-16 .50 CAL MACHINE GUNS ........................ SCOTT ROSS (5849) [email protected] GENE O’BRIAN (5830) [email protected] MK19-3 40MM MACHINE GUN ........................................... DENNIS LAMBRECHT (5808) [email protected] GENE O’BRIAN (5830) [email protected] MORTARS & LINE THROWING DEVICES......................... A.J. ZIRKELBACH (1949) [email protected] SNIPER WEAPONS ................................................................. PAT MITTERNIGHT (5762) [email protected] MATCH/MARKSMANSHIP PROGRAM............................ PAT MITTERNIGHT (5762) [email protected] MK23-0 USSOCOM PISTOL.................................................. JEFF JOHNSON (5799) [email protected] SOPMOD M4 ACCESSORY KIT PROGRAM...................... GUS TAYLOR (5645) [email protected] DAVE ARMSTRONG (5731) [email protected] NAVSPECWARCOM WEAPONS PROGRAM MANAGER................................................................................ TROY SMITH (5858) [email protected] NSW O-LEVEL MAINTENANCE PROGRAM/ ARMORER COURSE............................................................... JERRY ROBERTSON (4072) [email protected] PROTOTYPE FABRICATION................................................ TIM WININGER (5745) [email protected]

Commercial (812) 854-XXXX DSN 482-XXXX FAX (1044)

10

ARMAMENT SYSTEMS BRANCH – CODE 4082

MGR: SCOTT JOHNSON PHONE: (812) 854-5081 FAX: 1044 DSN: 482 SUBJECT POC EXT

MK 26 .50 CAL M2HB MOUNT TIM PURCELL 5844 MK 56 .50 CAL POWERED MOUNT TIM PURCELL 5844 MK 58 7.62MM M60 MOUNT TIM PURCELL 5844 MK 82 7.62MM M60 MOUNT JIM BUECHLER 5744 MK 93 40MM/.50 CAL DUAL MOUNT TIM PURCELL 5844 MK64 GUN MOUNT TIM PURCELL 5844 MK 94 LIGHTWT .50 CAL MOUNT JIM BUECHLER 5744 MK 95 LIGHTWT TWIN .50 CAL MOUNT JIM BUECHLER 5744 MK 97 M240 GUN MOUNT SHAWN LAMBERMONT 5126 M122/MK 123 GROUND TRIPOD MIKE HOLZMEYER 5795 HH60 HELICOPTER ARMNT JIM FISHER 5779 UH-1N/SH60B HELICOPTER ARMNT JIM BUECHLER 5744 MOUNT IN SERVICE ENGRG SUPT DON ARTHUR 5733 OFFICE OF SPECIAL TECHNOLOGY JIM ERNEST 5776 ADVANCED ARMORED AMPHIBIOUS VEH BRAD CORWIN 5759 OST/USSOCOM GUN SYSTEMS JIM ERNEST 5776 NAVSPECWARDEVGRU SUPT JOHN WARD 5875 7.62MM MINIGUN SYSTEM SKIP ACKERMAN 5723 MK V SOC SCOTT JOHNSON 5081 COMNAVSPECWARCOM SUPPORT SCOTT JOHNSON 5081 RIB MOUNTS TIM PURCELL 5844

Documents

NAVSEA Weapons Listing