NASSAU 9000 Industrial Doors

2

With 37 years behind them, our doors will never let you down

When you are in the market for an industrial sectional door, you should demand the highest quality in every aspect – from design and functionality to safety in use. That has been the NASSAU Door philosophy for 37 years, and it’s your guarantee of a door that will never let you down.

Award-winning designWhen it comes to exterior design, we believe in combining aesthetics with functionality without compromising either. Our wide range means that you can get exactly the look you want, whether you need to find a door for a challenging new project or match the style of an existing building. And behind the door’s tough exterior, you will find that we are constantly developing new features and accessories. We are proud to say that we offer the broadest range of sectional doors on today’s market, thanks to our wide variety of models and options.Our focus on designand functionality has won us awards, including the Danish ID award for industrial design. Even more importantly, it has also won us lots of satisfied customers!

Quality at all levelsAt NASSAU Door, we believe that you can only truly experience the quality of our product when we add the benefit of our expert advice, installation and after-sales service. We want to help you make the right choice and ensure that your door works faultlessly in your environment and lives up to the demand of many years’ fault-less performance in intensive use.

3

Contents

Tough requirements at every stage Page 4

Your safety is our responsibility Page 5

NASSAU 9000F – The door for every application Page 6

NASSAU 9000G – Illuminating experiences Page 8

NASSAU 9000M – Flexibility, design and strength Page 10

Facade integrity Page 12

Precision from A to Z Page 14

Financial benefits of electrical operation Page 16

Notes Page 18

Summary of technical specifications Page 19

4

At NASSAU Door, we aim to deliver the best possible quality at every stage of customer inter-action. This means that not only our products, but also our advice, installation and after-sales service must conform to the highest standards.

Professional adviceTo make sure that you get the most from your new door, it is important to take all practical factors into account from day one of the project: The load on the door, space considerations both outdoors and indoors, use of the area behind the door, users’ working conditions, and much more. For these purposes, you can rely on your local authorized NASSAU dealer before and during the project. As an additional service at the quota-tion stage, you can have an accurate drawing of the finished door to give you all the information you need in the decision-making stage.

Doors without compromiseThe NASSAU 9000 door is manufactured at our fully automated production facility to guarantee consistently high quality. All components are subject to ongoing quality control, and we check every single door before dispatch. The NASSAU 9000 door has been developed to withstand even the harshest climatic conditions. Our high demands in terms of materials and finish mean that the door has the best resi-stance to wind and water and the best insulating properties on the market.

Customized to suit your needsYour NASSAU door will be manufactured precisely to your order. We configure the individual door components according to the door’s size and intended use to ensure many years of trouble-free use.

Delivery and installationTo avoid damage during transport, we deliver the door carefully packaged. We recommend installation by an authorized NASSAU dealer, so you can leave the respon-sibility for optimal, problem-free operation of the door to us.

Tough requirements at every stage

5

Your safety is our responsibility

A door with many moving parts requires special attention to safety measures. With the NASSAU 9000, we have developed the safest door ever produced.

Protecting usersThe NASSAU 9000 is equipped with finger protection, making it impossible for users’ fingers to get trapped between the sections of the door.

The door is also available with both spring- and cable-break protection. This prevents the door from crashing down in case of torsion spring or lifting cable failure.

Approved to EN 13 241-1 All NASSAU doors meet the European product standard EN 13 241-1, which ensures the highest level of safety in use.

The NASSAU 9000 is also manufactured in accordance with national and European standards and environmental requirements.

Protection against crashing doors Protection against trapping

Spring-break protection

Cable-break protection*

Protection disks on door rollers*

Bottom edge protection on electrically-operated doors

* Optional

With spring-break protection fitted, the door is prevented from falling if the door’s torsion springs should break.

A protection disk has been fitted in front of the door rollers in the guide rail. This minimi-zes the risk of injuries to fingers that might otherwise get trapped between the door rollers and the rail.

The door lifting cable is fed inside the rail assembly itself, minimi-zing the risk of contact between the cable and people or objects.

With cable-break protection fitted, the door is prevented from falling if one or both of the door’s lifting wires should break.

Bottom edge protec-tion automatically stops the door if the door comes into contact with people or objects while closing.

On electronically operated doors, sa-fety sensors are fitted where required, to automatically stop the door if an obstacle is present in the doorway while closing.

The convex and concave section tops and bottoms fit together perfectly, preventing fingers or other objects from becoming trapped between the sections.

Tests are carried out by:

Finger protection between sections

Internal wire run Safety photo cells on elec-tronically operated doors

6

9000F

The door for all applications

Steel, aluminium or stainless steelDoors are available in aluminium or steel. However, if the location of the door imposes special requirements concerning cleaning and hygiene, we can match these requirements with a special stainless version. This makes cleaning easier and enables the door to withstand even extreme exposure without rusting.

Steel: Aluminium:

The NASSAU 9000F was developed for inten-sive daily use. This robust door was developed with durability, design and cost-efficiency in mind and will tolerate innumerable openings and closings throughout its installation life.The door is made from 44 mm polyurethane foam sections with a remarkable section height of 675 mm. The tall sections produce a harmonious door with few joints. Yet the door is easy to operate and quiet in use.

Keeping heat insideThe door provides effective protection against the wind, the rain and the cold due to a combination of polyurethane foam sections and effective seals all the way round. The door sections are fitted with a synthetic strip which breaks the thermal bridge between the front and back of the panel. This means that thermal transfer through the door is reduced, heat loss is minimized and condensation on the inside of the door is reduced.

Harmonious designThe hidden section joints combined with the embossed surface give the NASSAU 9000F a contemporary, minimalistic appearance ideal for modern buildings. The door comes in 10 standard colours or can be custom painted according to your wishes within the RAL or NCS colour scales.

Windows and pass doors – the choice is yoursYou can supplement the door with both windows and an integrated pass door. Four types of windows are available, all of which are fixed-frame constructions to prevent illegal entry.

7

Technical specifications: Examples:

Max. door size: Width: 1500mm – 10000mm Height:* 1500mm – 6175mm Wind resistance:** Class 3 (to EN 12 424)

Water tightness:** Class 3 (to EN 12 425)

Air tightness:** Class 3 (to EN 12 426)

Insulation properties:** U = 1,02 W/m2K (to EN 12 428)

Windows: 4 different energy-efficient windows fitted in an anti-intruder plastic frame

Materials: Aluminium, steel or stainless steel

* Doors up to 12 metres tall can be supplied on request

**Values for a door measuring 4 x 4 metres without a pass door

Hard-wearing and weather-resistant surfaceDoors from NASSAU Door are created for the toughest climatic conditions. The choice of materials and construction ensure that wind and weather do not leave their mark on your door.

Choose the colour you wantYou can either choose one of the 10 standard colours, or you can choose a customized colour to suit your needs from the RAL or NCS colour scales at additional cost.

Optimal sealNASSAU doors are fitted with a complete system of seals between the building and the door and between the individual sections. This reduces draughts and your heating bill in one go.

Hidden section jointsThe design of the door leaf hides the section joints, giving an attractive and harmonious surface.

Efficient insulationThe panels are insulated with environmen-tally neutral polyurethane foam, which has excellent insulating properties. The integrated synthetic strip effectively breaks the thermal bridge between the front and back of the panel.

Anti-intruder fixed-frame windowThe NASSAU 9000F is available with 4 different types of energy-efficient window, all fitted in an anti-intruder frame.

8

9000G

An illuminating experience

Elegance and light are key words for the NASSAU 9000G. With the NASSAU 9000G, you can combine glass with other filling options, all framed by strong, lightweight aluminium profiles. This is the ideal solution if you need good lighting conditions or if you want to invite passers-by to look inside, e.g. in a showroom.

Thanks to its elegant design and the wide range of filling options, the NASSAU 9000G is also very popular for building projects where architecture has pride of place.

Design your own doorThe NASSAU 9000G is made from extruded aluminium profiles, and offers a choice of 16 different filling options.

The door is constructed with weather-resi-stant anodized aluminium profiles, which may be custom painted in any colour you like from the RAL or NCS colour scales. Section height may be customized from 400 mm to 675 mm, so the design of the door follows the lines of the building. Finally, you can choose to have your NASSAU 9000G fitted with an integrated pass door.

Choose from 16 different filling options, e.g.

• Single acrylic• Double acrylic (standard)• Pearl acrylic• Polycarbonate• Hardened glass• Laminated glass• Wire-reinforced glass• Smooth insulated anodized aluminium• Insulated stucco aluminium• Expanded metal

9

Technical specifications: Examples:

Max. door size: Width: 1644mm – 7000mm Height: 1500mm – 5000mm Wind resistance:* Class 2 (to EN 12 424)

Water tightness:* Class 3 (to EN 12 425)

Air tightness:* Class 3 (to EN 12 426)

Insulation properties:* U = 3.57 W/m2K (to EN 12 428)

Filling options: 16 different standard filling options

*Values for a door measuring 4 x 4 metres with double acrylic fillings

16 different standard filling optionsWith a choice of 16 different standard panelling options, we can meet virtually any requirements concerning the appearance or functionality of your door.

Weather-resistant surfaceThe anodized surface can withstand the impact of the elements without losing its attractive surface finish.

Optional coloursThe surface of the sections can be powder-coated or wet-coated with a two-component acrylic paint in the colour of your choice.

Optimal sealNASSAU doors are equipped with a complete system of seals between both the building and the door and between the individual sections. This reduces draughts and your heating bill in one go.

Hidden section jointsThe design of the door leaf hides the section joints, giving an attractive and harmonious surface.

Variable section heightThe sections are made from strong, lightweight extruded aluminium profiles. The sections are available in custom heights, so they can be adapted to the building’s general lines.

10

9000M

Flexibility, design and strengthWith the NASSAU 9000M, you get the best of both worlds: You can have both light and light weight as well as the elegant design elements of aluminium frames and filling options to suit your wishes and needs. You can also add durable, insulating foam sections in the same door.The end result is a thoroughly insulated, robust door with an elegant and modern appearance, which lets in plenty of light too.

Harmonious interaction with the buildingAluminium profile sections for the NASSAU 9000M can be manufactured in custom heights, enabling the lines of the door to blend in perfectly with the building as a whole. You can choose from 16 different filling options, so the door has exactly the functionality and appearan-ce you want.

Free choice of coloursFor the foam panels on the NASSAU 9000M, you can choose one of NASSAU’s 10 standard colours or a colour of your choice from the RAL or NCS colour scales. The aluminium profile sections are normally ma-nufactured from anodized aluminium. However, you can choose exactly the colour you want with a choice of powder-coating or a two-component acrylic paint.As with the other models, the NASSAU 9000M can be fitted with an integrated pass door.

You can combine foam and aluminium profile sections freely to suit your needs and wishes. However, the bottom section must always be a foam section.

11

Technical specifications: Examples:

Max. door size: Width: 1644mm – 10000mm Height: 1500mm – 6175mm Wind resistance:* Class 3 (to EN 12 424)

Water tightness:* Class 3 (to EN 12 425)

Air tightness:* Class 3 (to EN 12 426)

Insulation properties:* U = 1.44 W/m2K (to EN 12 428)

Filling options: 16 different standard filling options

*Values for a door measuring 4 x 4 metres

Choose any colour you wantYou can either choose one of the 10 standard colours (foam sections) or a customized colour to suit your wishes from the RAL or NCS scales for an additional charge.

Optimal sealNASSAU doors are equipped with a complete system of seals between both the building and the door and between the individual sections. This reduces draughts and your heating bill in one go.

Hidden section jointsThe design of the door leaf hides the section joints, giving an attractive and harmonious surface.

Efficient insulationThe panels are insulated with environmen-tally neutral polyurethane foam, which has excellent insulating properties.

16 different standard filling optionsWith a choice of 16 different standard filling options, we can meet virtually any requirements concerning the appearance or functionality of your door.

Hard-wearing and weather-resistant surfaceNASSAU Doors are created for the toughest climatic conditions. The choice of materials and design ensure that the elements will not leave their mark on your door.

12

Facade integration

Match your corporate coloursWith the NASSAU Door colour range, your building can become a natural part of your corporate image. All access doors and flashings, as well as the sectional door itself, can be customized with the colours and surface finishes that suit your needs and wishes.

NASSAU’s 10 standard coloursThe foam sections on the NASSAU 9000F and 9000M are supplied in any of the 10 pre-painted colours shown here on this page. For an additional charge, you can also pick the colour of your choice from the RAL or NCS colour scales.

The aluminium profile sections on the NASSAU 9000G and 9000M are normally manufactured from anodized aluminium. However, you can choose exactly the colour you need to match your company’s colours precisely. Please note that profiles for pass doors always come without a topcoat.

For technical printing reasons, the colours in the brochure are indicative only. Please contact your local NASSAU dealer for accurate colour samples.

RAL 8017/ND 845

RAL 3000/ND 320

RAL 7016/ND 701

RAL 9002/ND 953

RAL 9010/ND 955

RAL 9006/ND 100

RAL 1021/ND 114

RAL 5010/ND 528

RAL 3004/ND 323

RAL 6005/ND 637

Please note that the ND standard colours roughly match the listed RAL numbers.

10 standard colours

13

Same design doors and side/upper sectionsTo give your facade a harmonious overall look, you can choose the same surface finish and coating as your NASSAU sectional door for your access doors and over and upper fields. We manufacture doors and panels to order, giving you complete freedom in terms of shapes and colours.

In general, we recommend that you place pedestrian access doors next to the door rather than in the door itself, for both practical and safety reasons.

The NASSAU 9000G with side field with door in matching colour and design.

The NASSAU 9000F with over field in matching colour and design.

The NASSAU 9000G with side fields in matching colour and design. Smaller access doors have been fitted in the side fields between the sectional doors.

Precision from A to Z

The perfect fitIn order for a door to slide smoothly and quietly and be capable of withstanding the rigours of daily use in a professional setting, it must be installed accurately and precisely relative to the doorway. The slightest misalignment or imprecision can cause noise and abrasive wear. That is why the NASSAU 9000 is fitted with strong, adjustable components to allow precision installation of the door.An additional benefit is that the door is completely sealed to protect workers against cold or draughts.

Built-in reinforcements Reinforcements in the door leaf sec-tions add durability to the middle and side hinges, as well as to the fitting of the reinforcement profiles on the door leaf.

Adjustable hinges and fittingsThe door is equipped with adjustable hinges and fittings to allow optimal installa-tion with respect to the building. This also means that the door forms an effective seal to eliminate indoor draughts when the door is closed.

Adjustable guide tracksThe guide tracks on the door are adjustable relative to the angle rail secured to the building. This enables the door to be adjusted independently of any misalignment in the building.

Professional installation

To guarantee optimal, problem-free

operation of the door, we recommend

that the door be installed by a specially

trained NASSAU dealer.

15

There is always room for a NASSAU door

Individual assessment of door tracksOne of the advantages of the NASSAU 9000 is that the door leaf is pulled completely free of the doorway. This means that the height of the door opening can be fully exploited. In the same way, you get full benefit from your ceiling height by routing the tracks as close to the ceiling as possible. This method also provides the most stable door fitting and operation.

The tracks that guide the door leaf during opening and closing are available in many versions, allowing them to be routed to suit the individual circumstances of each door. Decisive factors in the choice of tracks include the headroom above the doorway and the slope of the ceiling in the room. We consider all these factors before we give you our final recommendation for track type.

Adjustable lifting cableThe door’s lifting cable can be adjusted easily during servicing to keep the lifting wire taught, which is essential for optimal door operation.

Specially manufactured door rollersOur door rollers are specially manufac-tured from materials which guarantee prolonged service life and friction-less running.

= Requires just 150 mm headroom

SL:

Standard lift

LHT:

Low head with sloping

ceiling

LHT-SF:

Low head with sloping ceiling and

specially placed springs

LH-SF:

Low head with specially placed

springs

VLKF:

Vertical lift with console placed

springs

VL: Vertical lift

HLKFT:

High lift with sloping ceiling

and console placed springs

HLT:

High lift with sloping ceiling

HLKF:

High lift with console placed

springs

HL:

High lift

LH:

Low head

SLT:

Standard lift with sloping

ceiling

16

Financial benefit of electric operation

For the good of the users – and the doorElectric door operation is much more than the convenience of being able to operate the door automatically. With electric operation and auto-close, you also reduce the amount of time that the door is open. This reduces temperature loss and minimizes the draught nuisances that make the working environment unpleasant.Electric operation also makes the door move gentler and more smoothly, which reduces wear on moving parts and extends the service life of the door.

Safety firstThe safety system on the NASSAU 9000 constantly monitors the door’s electronic features to ensure the safety of everyone around the door. If just one safety function fails, the door is automatically put out of operation and can only be operated manually.

Naturally, the electrically operated solutions from NASSAU Door are approved in accordance with all current international standards for safety and functionality.

Electric operation to meet your needsElectric operation can be fitted completely according to your needs. You can choose from a wide variety of different operating principles:

•Remote controls•Pushbutton boxes•Pull switch•Photo cells for opening•Induction field•Radar for opening•Key-operated switches

Examples of operating equipment

RadarMulti-adjustable radar, which controls the door based on movement.

Wireless code keypadThe keypad communicates wirelessly with the control unit, eliminating the need for cables

Remote control (truck transmitter)Can control up to 999 units.

Remote control1- and 4-channel remote control.

3-button pushbutton box with keyWith up and down function, and emergency stop with key (IP 65).

3-button pushbutton box With up and down function and emergency stop (IP 65).

Remote control

Pull switch

Pushbutton boxesInduction field

Radar for opening

Photo cells for opening

+

17

MMI50 MMI75

Power and placement according to your needs The motor for the electronic controls must be correctly configured according to the measurements, weight and intended use of the door. As a consequence, we offer a series of motors and recommend the model that best corresponds to your needs. The electric gear motors can be mounted on the shaft in a variety of ways. If there is insufficient room on the side to mount the motor on the shaft, the motor can also be mounted as a chain motor. No matter the challenge we will always come up with a functional solution.

ED 420A control unitCombined control and operating unit with up, stop and down functions and emergency stop

ED 420 control unit Control and operating unit installed separately. Control unit installed next to the motor unit.

Pull switchThe door is activated using a pull switch.

Strong motor solutions

TECHNICAL DATA GEAR MOTOR MMI50 GEAR MOTOR MMI75

Motor type 3-phase motor – without cooling fan 3-phase motor – with cooling fan

Protection class IP55 IP55 (IP 65 optional)

Rated output (motor) 0.30 kW 0.37 kW

RPM 1385 RPM 1410 RPM

Voltage 3 x 400V / 3 x 230V 3 x 400V / 3 x 230V

Transmission Worm transmission in oil bath Worm transmission in oil bath

(maintenance-free) (maintenance-free)

Gear Self-locking Self-locking

Emergency disengagement Activated via an aluminium handle with a pull-cord. Activated via a plastic wheel with a pull-cord.

Emergency disconnection is activated from floor Emergency disconnection is activated from floor

level and enables manual operation. level and enables manual operation.

Temperature range -10°C - +60°C -10°C - +60°C

Integrated chain hoist Option -

18

Notes

19

9000F 9000M9000G

*Values for a door measuring 4 x 4 metres without a pass door **With double acrylic filling

Model •= standard ○ = option - = not possible

Size Width in mm (min. - max.) 1500 - 10000 1644 - 7000 1644 -10000

Height in mm (min. - max.) NB. Higher doors can be supplied on request 1500 - 6175 1500 - 5000 1500 - 6175

Material (door leaf) Aluminium • • •Steel • - •Stainless steel ○ - ○

Section size Height in mm 675 400-675 675/400-675

Thickness in mm 44 44 44

Wind resistance* To EN 13 241-1/EN 12 424 (class) 3 2 3

Insulation properties* To EN 13 241-1/EN 12 428 (U = W/m²K) 1.02 3.57** 1,44

Water tightness* To EN 13 241-1/EN 12 425 (class) 3 3 3

Air tightness* To EN 13 241-1/EN 12 426 (class) 3 3 3

Seals Side seal • • •Top seal • • •Inter-section seal • • •Bottom seal • • •Interrupted thermal bridge between the front and back of the panel • - Foam sections

Pass door Pass door over max. 3 sections • ○ ○

Colours/surface 10 prepainted standard colours ○ - Foam sections

finishes Anodized aluminium - • Aluminium profile sections

All RAL and NCS colours ○ ○ ○

Safety equipment Finger protection between panels • • •Cable break protection ○ ○ ○Spring break protection • • •Protection disk on door rollers ○ ○ ○Safety photocells on electrically operated doors ○ ○ ○

Windows/fillings 4 types of energy-efficient windows in anti-intruder plastic frames ○ - -

16 different standard fillings - ○ ○

Summary table

NASSAU Door develops, manufactures and services

industrial sectional doors. We are on a constant quest

to improve design, functionality and working environments

and we manufacture our doors to the highest technical

standards – without compromise.

This philosophy has earned us our position as one of

Europe’s leading door manufacturers for more than 37

years.

Authorized NASSAU dealer:

NASSAU Door retains the right to change the information contained herein without further notice. 05/06 GB 89-18011

NASSAU Door A/SKrogagervej 2 • 5750 Ringe Denmark

Tel: +45 62 62 23 46Fax: +45 62 62 39 18

www.nassaudoor.com