Upload
ezra-arnold
View
221
Download
1
Tags:
Embed Size (px)
Citation preview
Nanocellulose -Technology & Business
Trends
John Cowie PhDJanuary 14, 2015
nanoC
nanoC.technology
Nanocellulose - What is it?
From wood ~ 4 nm diameter, ~ 150 nm long
Aspect ratio (l/d) about 35
Ratio can be as high as 1000
Theoretically 100% crystalline
As low as 70%
nanoC.technology
Three Main Types
1. Cellulose Nanofibrils (CNF)Manufactured through mechanical and chem/bio-mechanical means
2. Cellulose NanoCrystals (CNC)Manufactured by acid hydrolysis of pulp
3. Cellulose Filaments (CF)Manufactured by mechanically peeling the cellulose strands
nanoC.technology
Potential Uses
Improved paper and packaging products
Reinforced polymers
Advanced composite materials
Hydro-fracking and oil drilling fluids
High-strength spun fibers and textiles
Films for barrier and other functions
Coatings, paints, lacquers and adhesives
Switchable optical devices
Pharmaceutical and drug delivery
Bone replacement and teeth repair
Improved building products
Additives for foods, cosmetics
Aerospace and transportation
nanoC.technology
Production
nanoC.technology
Cellulose Nanofibrils (CNF) -
Mechanical and chem/bio-mechanical means
Production
nanoC.technology
Cellulose NanoCrystals (CNC)
1. Milling2. Acid Hydrolysis3. Clarification4. Acid removal5. Concentration6. Drying
Production
nanoC.technology
Cellulose Filaments (CF)Manufactured by mechanically peeling the cellulose strands
Length: 10,000 - 50,000 nmDiameter: 20 - 100 nmAdpect ratio (L/D): 100 -
2500
Comparison of Select Properties
• Bullet Point• Bullet Point
– Sub Bullet
nanoC.technology
MaterialDensity(g/cm3)
Tensile Strength
(MPa)
Modulus ofElasticity
(GPa)
Elongation toFracture
(%)
CelluloseNanocrystals CNC 1.5 10,000 150 6.7
Carbon Nanotube CNT 1.2 30,000 1054 6
Carbon 1.7 4,000 235 1.6
Kevlar 1.4 2,800 183 4
316 Stainless Steel 8.0 580 290 50
Comparative Toxicity
Lethal Concentration LC50 test
Species used for toxicity testing:
Daphnia magnaCerio-daphnia dubia
Acute lethal toxicity (mg/L)Very toxic <0.1Toxic 0.1-1.0Moderately toxic 1-10Slightly toxic 10 -100Practically nontoxic >100
nanoC.technology
Comparative Toxicity
Material
Toxicity, 48 hour LC50*, mg/L RelativeToxicity
Daphnia Ceriodaphnia
CNC (60 – 100 nm) > 1,000 (3,200) > 1,000 (3,200) Nontoxic
CMC (Carbo methyl cellulose) > 10,000 > 1,000 (3,200) Nontoxic
MCC (microcrystallince cellulose) > 1,000 > 1,000 Nontoxic
TiO2 (30 nm) 5.5 - Moderately toxic
TiO2 (100 – 500 nm) > 500 - Nontoxic
Fullerine (10 – 20 nm) 0.5 - Toxic
Fullerine (20 -100 nm) 7.9 - Moderately toxic
NaCl ~ 5,500 ~ 1,200 Nontoxic
* LC50 Toxicity – the concentration of a substance that is lethal to 50% of the organisms exposed to it.
nanoC.technology
Cost Comparison
• Cellulose Nanofibrils (CNF)– Without depreciation of equipment : ~ $3.40 to 5.00/kg– With Depreciation: ~ $17.00/kg
• Cellulose Nano Crystals (CNC)– Without depreciation of equipment : ~ $3.20 to 5.00/kg– With Depreciation: ~ $16.00/kg
• Cellulose Filaments (CF)– Not determined
nanoC.technology
Material of the Future
nanoC.technologyPerformance
Co
st
Nanomaterials Cost versus Performance
Wood flour$0.05 - $0.10/lb
Cellulose Nano Crystals
Organoclays~ $4.00/lb
Carbon NanotubesUp to $200,000/lb
Potential Market Size
• Bullet Point• Bullet Point
– Sub Bullet
nanoC.technology
Nanocellulose - The Producers
• Bullet Point• Bullet Point
– Sub Bullet
nanoC.technology
15
CNC Pilot Plant – Forest Products Laboratory, Madison, WI
FPL opened a new U.S/ Forest Service-funded $1.7 million nanocellulose pilot plant in 2012
Producing about 30 kg of cellulose nano-crystals (CNC) per week
Producing 5 kg of cellulose nano-fibrils (CNF) per week
nanoC.technology
Cellulose Nanofibrils (CNFs) Pilot Plant – University of Maine
Cellulose Nanofiber Production and Functionalization LaboratoryFunded by a $1.5 million grant from the U.S. Forest ServiceThe only one of its kind in the nationUniversity Consortium:
• University of Maine• Georgia Institute of Technology• North Carolina State University• Oregon State University• Pennsylvania State University• Purdue University • University of Tennessee
nanoC.technology
Borregaard -Norway
Borregaard ChemCell offer speciality cellulose for the production of Exilva ® or microcrystalline cellulose
2016: new production Plant with capacity of 1000 tonnes per year with a potential for expansion
Food additives (SenseFi ®)
nanoC.technology
Innventia -Stockholm Sweden
World's First Pilot Plant for Production of Nanocellulose Inaugurated in 2011 Produce nanocellulose on a large scale
Important step towards commercial applications
nanoC.technology
CelluForce – Windsor, Quebec, Canada
Partnership between FPInnovations and DomtarOne ton per day CNC production $33.4 million of government fundingProduction commenced in 2012
nanoC.technology
UPM Biofibrils (CNFs)Helsinki, Finland
UPM has developed a product family of fibrillated cellulose materials for various industrial applicationsIndustrial viscosity modifiers of water-based systems:
Paints, coatings, oil drilling fluids, concrete and grouts
Reinforcement additive in composites:Paper and packaging products
Synthetic or bio-based Looking for partnerships and customers, especially in the composite fieldIndustrial scale samples available
nanoC.technology
Cellulose Nanomaterials in Japan
NCF (Nanocellulose Forum) A Japanese Ministry of Economy,
Trade and Industry Consortium
nanoC.technology
Performance Biofilaments
• Performance BioFilaments is a joint venture between Mercer International and Resolute Forest Products
• Five ton/day cellulose filament demonstration plant started-up in Quebec in 2014
nanoC.technology
American Process Inc.
• American Process and Futuris Automotive are developing ultra-strong, lightweight automotive structural components reinforced with nanocellulose
• Substitute for expensive light-weight carbon fiber composites
• Futuris Automotive currently produces the interior components for Tesla
nanoC.technology