Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 1 页 共 93 页
Name: Guangzhou Academy of Special Equipment Inspection and Testing
Address: No.3598, Huangpu East Road, Huangpu District, Guangzhou, Guangdong, China
Registration No. CNAS L1572
Accreditation Criteria: ISO/IEC 17025 and relevant requirements of CNAS
Effective Date: 2019-05-23 Expiry Date:2022-03-09
SCHEDULE 3 ACCREDITED TESTING SCOPE
Item/Parameter№ Test Object
№ Item/ ParameterStandard or Method Note
Electric
Explosion-proof electric equipment
Explosion -proof electrical appartus GB 3836.1-2010 6.6.1 1 radio sources Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-
0:2017 6.6.1
Explosion -proof electrical appartus GB 3836.1-2010 6.6.2
Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-0:2017 6.6.2
Explosive atmospheres –Part 28: Protection of equipment and transmission systems using opticalradiation IEC 60079-28:2015 5
2laser or other continuous wave sources
Explosive atmospheres –Part 22: Protection of equipment and transmission systems using opticalradiation GB/T-3836.22-2018 4,5
1Explosion -proof electrical appartus
3 ultrasonic wave source Explosion -proof electrical appartus GB 3836.1-2010 6.6.3
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 2 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-0:2017 6.6.3
Explosion -proof electrical appartus GB 3836.1-2010 16.5 4 temperature tset for
branch and entry point Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-0:2017 16.6
Explosion -proof electrical appartus GB 3836.1-2010 26.4.2 5 resistance to impact Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-
0:2017 26.4.2
Explosion -proof electrical appartus GB 3836.1-2010 26.4.3 6 drop test Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-
0:2017 26.4.3
Explosion -proof electrical appartus GB 3836.1-2010 26.4.5 7 degree of protection
of enclosure Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-0:2017 26.4.5
Explosion -proof electrical appartus GB 3836.1-2010 26.5.1 8 temperature test Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-
0:2017 26.5.1
Explosion -proof electrical appartus GB 3836.1-2010 26.5.2 9 thermal shock test Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-
0:2017 26.5.2
Explosion -proof electrical appartus GB 3836.1-2010 26.5.3 10 small component
ignition test Electrical apparatus for use in the presence of combustible dust Part 4: Protection by intrinsic safety “iD” GB 12476.4-2010 10.4
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 3 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-0:2017 26.5.3
Explosion -proof electrical appartus GB 3836.1-2010 26.6 11 torque test for
bushings Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-0:2017 26.6
Explosion -proof electrical appartus GB 3836.1-2010 26.8 12 thermal endurance to
heat Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-0:2017 26.8
Explosion -proof electrical appartus GB 3836.1-2010 26.9 13 thermal endurance to
cold Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-0:2017 26.9
Explosion -proof electrical appartus GB 3836.1-2010 26.10 14 resistance to light Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-
0:2017 26.10
Explosion -proof electrical appartus GB 3836.1-2010 26.11 15
resistance to chemical agents for Group Ⅰ electrical equipment
Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-0:2017 26.11
Explosion -proof electrical appartus GB 3836.1-2010 26.12 16 earth continuity Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-
0:2017 26.12
Explosion -proof electrical appartus GB 3836.1-2010 26.13 17
surface resistance test of parts of enclosures of non-metallic materials
Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-0:2017 26.13
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 4 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Explosion -proof electrical appartus GB 3836.1-2010 26.14 18 charging test Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-
0:2017 26.14
Explosion -proof electrical appartus GB 3836.1-2010 26.15 19 measurement of
capacitance Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-0:2017 26.14
20 Verification of ratings of ventilating fans
Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-0:2017 26.15
21
Alternative qualification of elastomeric sealing O-rings
Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-0:2017 26.16
Explosive atmospheres-Part 1 : Equipment-General requirements GB 3836.1-2010
22 Structure test Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-0:2017
Explosive atmospheres-Part 1 : Equipment-General requirements GB 3836.1-2010 29
23 Marking Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-0:2017 29
Explosion -proof electrical appartus GB 3836.1-2010 A3.1 24
tests of clamping of non-armoured and braided cables Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-
0:2017 A3.1
Explosion -proof electrical appartus GB 3836.1-2010 A3.2 25 tests of clamping of
armoured cables Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-0:2017 A3.2
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 5 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Explosion -proof electrical appartus GB 3836.1-2010 A3.3 26 resistance to impact Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-
0:2017 A3.3
Explosion -proof electrical appartus GB 3836.1-2010 A3.4 27
degree of protection of enclosure for Ex cable gland Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-
0:2017 A3.4
Explosion -proof electrical appartus GB 3836.1-2010 C.2 28
damp and heat test for Group Ⅰ electrical equipment
Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-0:2017 C.2
Explosion -proof electrical appartus GB 3836.1-2010 C.3、C4、C5 29
flammablity test for plastic enclosures of Group Ⅰ electrical equipment
Explosive atmospheres-Part 0 : Equipment-General requirements IEC 60079-0:2017 C.3、C4、C5
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 5
1 Flameproof joints Explosive atmospheres–Part 1: Equipment protection by f1ameproof enclosures "d" IEC 60079-1:2014 5
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 6
2 Sealed joints Explosive atmospheres–Part 1: Equipment protection by f1ameproof enclosures "d" IEC 60079-1:2014 6
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 7
3 Operating rods Explosive atmospheres–Part 1: Equipment protection by f1ameproof enclosures "d" IEC 60079-1:2014 7
2
electrical equipment protected by flameproof enclosure
4Supplementary requirements for
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 8
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 6 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
shafts and bearings Explosive atmospheres–Part 1: Equipment protection by f1ameproof enclosures "d" IEC 60079-1:2014 8
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 9
5 Light-transmitting parts Explosive atmospheres–Part 1: Equipment protection by f1ameproof
enclosures "d" IEC 60079-1:2014 9
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 10.9.2.1 only ⅡA
6
Test of the ability of the breathing and draining device to withstand pressure
Explosive atmospheres–Part 1: Equipment protection by f1ameproof enclosures "d" IEC 60079-1:2014 10.9.3.4 only ⅡA
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 10.9.2.2 only ⅡA
7Thermal tests for breathing and draining devices Explosive atmospheres–Part 1: Equipment protection by f1ameproof
enclosures "d" IEC 60079-1:2014 10.9.3.2 only ⅡA
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 10.9.2.3 only ⅡA
8
Test for non-transmission of an internal ignition for breathing and draining devices
Explosive atmospheres–Part 1: Equipment protection by f1ameproof enclosures "d" IEC 60079-1:2014 10.9.3.3 only ⅡA
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 11
9 Fasteners and openings Explosive atmospheres–Part 1: Equipment protection by f1ameproof
enclosures "d" IEC 60079-1:2014 11
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 13
10 Entries for flameproof enclosures Explosive atmospheres–Part 1: Equipment protection by f1ameproof
enclosures "d" IEC 60079-1:2014 13
11Tests of ability of the enclosure to withstand pressure
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 15.1 excludeⅠ
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 7 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Explosive atmospheres–Part 1: Equipment protection by f1ameproof enclosures "d" IEC 60079-1:2014 15.2 excludeⅠ
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 15.2 excludeⅠ
12Test for non-transmission of an internal ignition Explosive atmospheres–Part 1: Equipment protection by f1ameproof
enclosures "d" IEC 60079-1:2014 15.3 excludeⅠ
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 15.4 only ⅡA
13
Tests of flameproof enclosures with breathing and draining devices
Explosive atmospheres–Part 1: Equipment protection by f1ameproof enclosures "d" IEC 60079-1:2014 15.4 only ⅡA
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 19.2.1
14
Resistance to tracking and creepage distances on internal surfaces of theenclosure walls
Explosive atmospheres–Part 1: Equipment protection by f1ameproof enclosures "d" IEC 60079-1:2014 19.2
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 19.3.1.3
15 Test of erosion by flame Explosive atmospheres–Part 1: Equipment protection by f1ameproof
enclosures "d" IEC 60079-1:2014 19.4
16 Flammability Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 19.3.2
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 C.3.1
17 Sealing test Explosive atmospheres–Part 1: Equipment protection by f1ameproof enclosures "d" IEC 60079-1:2014 C.3.1
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 C.3.2
18 Test of mechanical strength Explosive atmospheres–Part 1: Equipment protection by f1ameproof
enclosures "d" IEC 60079-1:2014 C.3.2
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 8 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 C.3.3
19 Type tests for Ex blanking elements Explosive atmospheres–Part 1: Equipment protection by f1ameproof
enclosures "d" IEC 60079-1:2014 C.3.3
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 C.3.4
20 Type tests for Ex thread adapters Explosive atmospheres–Part 1: Equipment protection by f1ameproof
enclosures "d" IEC 60079-1:2014 C.3.4
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010 20
21 Marking Check Explosive atmospheres–Part 1: Equipment protection by f1ameproof enclosures "d" IEC 60079-1:2014 20
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.2-2010
22 Structure test Explosive atmospheres–Part 1: Equipment protection by f1ameproof enclosures "d" IEC 60079-1:2014
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 4.3
1 clearance Explosive atmospheres - Part 7:Equipment protection by increased safety "e" IEC 60079-7:2015+AMD1:2017 CSV 4.3
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 4.4
2 creepage distance Explosive atmospheres - Part 7:Equipment protection by increased safety "e" IEC 60079-7:2015+AMD1:2017 CSV 4.4
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 4.7
3 limiting temperature Explosive atmospheres - Part 7:Equipment protection by increased safety "e" IEC 60079-7:2015+AMD1:2017 CSV 4.8
3
Electrical equipment with increased safety type(e)
4 degree of protection of enclosure
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 4.9
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 9 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Explosive atmospheres - Part 7:Equipment protection by increased safety "e" IEC 60079-7:2015+AMD1:2017 CSV 4.10
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 6.1
5 Dielectric strength Explosive atmospheres - Part 7:Equipment protection by increased safety "e" IEC 60079-7:2015+AMD1:2017 CSV 6.1
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 6.2
6 Rotating electrical machines Explosive atmospheres - Part 7:Equipment protection by increased safety
"e" IEC 60079-7:2015+AMD1:2017 CSV 6.2
7 Impact and drop tests Explosive atmospheres - Part 7:Equipment protection by increased safety "e" IEC 60079-7:2015+AMD1:2017 CSV 6.3.2
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 6.3.1
8Mechanical tests for screw lampholders other than E10 Explosive atmospheres - Part 7:Equipment protection by increased safety
"e" IEC 60079-7:2015+AMD1:2017 CSV 6.3.3
9
Abnormal operation of luminaires with tubular fluorescent lamps
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 6.3.2
10 Abnormal operation of luminaires
Explosive atmospheres - Part 7:Equipment protection by increased safety "e" IEC 60079-7:2015+AMD1:2017 CSV 6.3.4
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 6.3.3
11
Sulphur dioxide test for the connection of bi-pin lamp caps to lampholders
Explosive atmospheres - Part 7:Equipment protection by increased safety "e" IEC 60079-7:2015+AMD1:2017 CSV 6.3.5
12Vibration test for luminaires with bi-pin lamps
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 6.3.4
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 10 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Explosive atmospheres - Part 7:Equipment protection by increased safety "e" IEC 60079-7:2015+AMD1:2017 CSV 6.3.6
13
Test for wiring of luminaires subject to high-voltage impulses from ignitors
Explosive atmospheres - Part 7:Equipment protection by increased safety "e" IEC 60079-7:2015+AMD1:2017 CSV 6.3.7
14
Tests for electronic starters for tubular fluorescent lamps and for ignitors in Level of Protection “ec” for discharge lamps
Explosive atmospheres - Part 7:Equipment protection by increased safety "e" IEC 60079-7:2015+AMD1:2017 CSV 6.3.8
15
Test for starter holders for luminaires in Level of Protection “ec”
Explosive atmospheres - Part 7:Equipment protection by increased safety "e" IEC 60079-7:2015+AMD1:2017 CSV 6.3.9
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 6.4
16
Measuring instruments and instrument transformers
Explosive atmospheres - Part 7:Equipment protection by increased safety "e" IEC 60079-7:2015+AMD1:2017 CSV 6.4
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 6.5
17Transformers other than instrument transformers Explosive atmospheres - Part 7:Equipment protection by increased safety
"e" IEC 60079-7:2015+AMD1:2017 CSV 6.5
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 6.6
18 cells and batteries Explosive atmospheres - Part 7:Equipment protection by increased safety "e" IEC 60079-7:2015+AMD1:2017 CSV 6.6、6.7
19General purpose connection and
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 6.7
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 11 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
junction boxes Explosive atmospheres - Part 7:Equipment protection by increased safety "e" IEC 60079-7:2015+AMD1:2017 CSV 6.8
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 6.8
20Resistance heating devices and resistance heating units Explosive atmospheres - Part 7:Equipment protection by increased safety
"e" IEC 60079-7:2015+AMD1:2017 CSV 6.9
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 6.9
21 Terminal insulating material tests Explosive atmospheres - Part 7:Equipment protection by increased safety
"e" IEC 60079-7:2015+AMD1:2017 CSV 6.10
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 7.1
22 Dielectric tests Explosive atmospheres - Part 7:Equipment protection by increased safety "e" IEC 60079-7:2015+AMD1:2017 CSV 7.1
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 7.2
23 Dielectric tests for batteries Explosive atmospheres - Part 7:Equipment protection by increased safety
"e" IEC 60079-7:2015+AMD1:2017 CSV 7.2
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 7.3
24 Inter-turn overvoltage tests Explosive atmospheres - Part 7:Equipment protection by increased safety
"e" IEC 60079-7:2015+AMD1:2017 CSV 7.3
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 B.1
25Resistance heating devices subjected to mechanical stresses Explosive atmospheres - Part 7:Equipment protection by increased safety
"e" IEC 60079-7:2015+AMD1:2017 CSV B.1
26
Resistance heating devices or units intended for
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 B.2
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 12 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
immersion Explosive atmospheres - Part 7:Equipment protection by increased safety "e" IEC 60079-7:2015+AMD1:2017 CSV B.2
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 B.3
27
Resistance heating devices or units having hygroscopic insulatingmaterial
Explosive atmospheres - Part 7:Equipment protection by increased safety "e" IEC 60079-7:2015+AMD1:2017 CSV B.3
Explosive atmospheres - Part 3: Equipment protection by increased safety "e" GB 3836.3-2010 B.4
28
Verification of limiting temperature of resistance heating devices (otherthan trace heaters)
Explosive atmospheres - Part 7:Equipment protection by increased safety "e" IEC 60079-7:2015+AMD1:2017 CSV B.4
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.3-2010
29 Structure test Explosive atmospheres–Part 1: Equipment protection by f1ameproof enclosures "d" IEC 60079-7:2015+AMD1:2017 CSV
Explosive atmospheres –Part2: Equipment protection by flameproof enclosure "d" GB 3836.3-2010 9
30 Marking Check Explosive atmospheres–Part 1: Equipment protection by f1ameproof enclosures "d" IEC 60079-7:2015+AMD1:2017 CSV 9
Explosive atmospheres - Part 4: Equipment protection by intrinsic safety "i" GB 3836.4-2010 5.6.2
1 Temperature for small components Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-11: 2011 5.6.2
Explosive atmospheres - Part 4: Equipment protection by intrinsic safety "i" GB 3836.4-2010 6.3
2 Separation distances Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" IEC 60079-11: 2011 6.3
4
Electrical equipment protection by intrinsic safety "i"
3 Spark ignition test Explosive atmospheres - Part 4: Equipment protection by intrinsic safety "i" GB 3836.4-2010 10.1
only 1.5 safety factor two
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 13 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
variables gas distributiing equipment
Electrical apparatus for use in the presence of combustible dust Part 4: Protection by intrinsic safety “iD” GB 12476.4-2010 10.1
only 1.6 safety factor two variables gas distributiing equipment
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" IEC 60079-11: 2011 10.1
only 1.7 safety factor two variables gas distributiing equipment
Explosive atmospheres - Part 4: Equipment protection by intrinsic safety "i" GB 3836.4-2010 10.2
Electrical apparatus for use in the presence of combustible dust Part 4: Protection by intrinsic safety “iD” GB 12476.4-2010 10.2 4 Temperature tests
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" IEC 60079-11: 2011 10.2
Explosive atmospheres - Part 4: Equipment protection by intrinsic safety "i" GB 3836.4-2010 10.3
5 Dielectric strength tests Electrical apparatus for use in the presence of combustible dust Part 4:
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 14 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Protection by intrinsic safety “iD” GB 12476.4-2010 10.3
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" IEC 60079-11: 2011 10.3
Explosive atmospheres - Part 4: Equipment protection by intrinsic safety "i" GB 3836.4-2010 10.4
Electrical apparatus for use in the presence of combustible dust Part 4: Protection by intrinsic safety “iD” GB 12476.4-2010 10.5 6
Determination of parameters of loosely specified components Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-11: 2011 10.4
Explosive atmospheres - Part 4: Equipment protection by intrinsic safety "i" GB 3836.4-2010 10.5
Electrical apparatus for use in the presence of combustible dust Part 4: Protection by intrinsic safety “iD” GB 12476.4-2010 10.6 7 Tests for cells and
batteriesExplosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" IEC 60079-11: 2011 10.5
Explosive atmospheres - Part 4: Equipment protection by intrinsic safety "i" GB 3836.4-2010 10.6
Electrical apparatus for use in the presence of combustible dust Part 4: Protection by intrinsic safety “iD” GB 12476.4-2010 10.7 8 Mechanical tests
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" IEC 60079-11: 2011 10.6
Explosive atmospheres - Part 4: Equipment protection by intrinsic safety "i" GB 3836.4-2010 10.7
Electrical apparatus for use in the presence of combustible dust Part 4: Protection by intrinsic safety “iD” GB 12476.4-2010 10.8 9
Tests for intrinsically safe apparatus containing piezoelectric devices Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-11: 2011 10.7
10Type tests for diode safety barriers and
Explosive atmospheres - Part 4: Equipment protection by intrinsic safety "i" GB 3836.4-2010 10.8
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 15 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Electrical apparatus for use in the presence of combustible dust Part 4: Protection by intrinsic safety “iD” GB 12476.4-2010 10.9 safety shunts
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" IEC 60079-11: 2011 10.8
Explosive atmospheres - Part 4: Equipment protection by intrinsic safety "i" GB 3836.4-2010 10.9
Electrical apparatus for use in the presence of combustible dust Part 4: Protection by intrinsic safety “iD” GB 12476.4-2010 10.10 11 Cable pull test
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" IEC 60079-11: 2011 10.9
Explosive atmospheres - Part 4: Equipment protection by intrinsic safety "i" GB 3836.4-2010 10.10
12 Transformer tests Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" IEC 60079-11: 2011 10.10
13 Optical isolators tests Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" IEC 60079-11: 2011 10.11
14
Current carrying capacity of infallible printed circuit board connections
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" IEC 60079-11: 2011 10.12
Explosive atmospheres - Part 19: Fieldbus intrinsically safe concept (FISCO) GB 3836.19-2010 4.2
15 FISCO power supplies Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-11: 2011 附录 G.2.2
Explosive atmospheres - Part 19: Fieldbus intrinsically safe concept (FISCO) GB 3836.19-2010 4.3
16 FISCO field devices Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" IEC 60079-11: 2011 附录 G.3
17 Terminator Explosive atmospheres - Part 19: Fieldbus intrinsically safe concept (FISCO) GB 3836.19-2010 4.4
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 16 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" IEC 60079-11: 2011 附录 G.3.4
Explosive atmospheres - Part 19: Fieldbus intrinsically safe concept (FISCO) GB 3836.19-2010 4.5
18 simple equipment Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" IEC 60079-11: 2011 附录 G.3.5
Explosive atmospheres - Part 19: Fieldbus intrinsically safe concept (FISCO) GB 3836.19-2010
19 structure test Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" IEC 60079-11: 2011 IEC 60079-11: 2011
Explosive atmospheres - Part 19: Fieldbus intrinsically safe concept (FISCO) GB 3836.19-2010 4.6
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" IEC 60079-11: 2011 附录 G.4 20 marking
Explosive atmospheres - Part 4: Equipment protection by intrinsic safety "i" GB 3836.4-2010 12
21 system requirements Explosive atmospheres - Part 19: Fieldbus intrinsically safe concept (FISCO) GB 3836.19-2010 5
Explosive atmospheres - Part 5: Equipment protection by pressurized enclosure "p" GB/T 3836.5-2017 16.1
Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p" IEC 60079-2:2014 16.2 1 Maximum
overpressure testElectrical apparatus for use in the presence of combustible dust—Part 7:Type of protection pD GB12476.7-2010 10.3
Explosive atmospheres - Part 5: Equipment protection by pressurized enclosure "p" GB/T 3836.5-2017 16.2
Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p" IEC 60079-2:2014 16.3
5Pressurized electrical apparatus "p"
2 Leakage test
Electrical apparatus for use in the presence of combustible dust—Part 7:Type of protection pD GB12476.7-2010 10.5
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 17 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Explosive atmospheres - Part 5: Equipment protection by pressurized enclosure "p" GB/T 3836.5-2017 16.3
3
Purging test for pressurized enclosures with no internal source of releaseand filling procedure test for static pressurization
Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p" IEC 60079-2:2014 16.4
Explosive atmospheres - Part 5: Equipment protection by pressurized enclosure "p" GB/T 3836.5-2017 16.4
4
Purging and dilution tests for a pressurized enclosure with an internal source ofrelease
Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p" IEC 60079-2:2014 16.5
Explosive atmospheres - Part 5: Equipment protection by pressurized enclosure "p" GB/T 3836.5-2017 16.5
Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p" IEC 60079-2:2014 16.6 5
Verification of minimum overpressure Electrical apparatus for use in the presence of combustible dust—Part 7:Type
of protection pD GB12476.7-2010 10.4
Explosive atmospheres - Part 5: Equipment protection by pressurized enclosure "p" GB/T 3836.5-2017 16.6
6 Tests for an infallible containment system Explosive atmospheres - Part 2: Equipment protection by pressurized
enclosure "p" IEC 60079-2:2014 16.7
Explosive atmospheres - Part 5: Equipment protection by pressurized enclosure "p" GB/T 3836.5-2017 16.7
7Overpressure test for a containment system with a limited release Explosive atmospheres - Part 2: Equipment protection by pressurized
enclosure "p" IEC 60079-2:2014 16.8
8
Verifying ability of the pressurized enclosure to limit internal pressure
Explosive atmospheres - Part 5: Equipment protection by pressurized enclosure "p" GB/T 3836.5-2017 16.8
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 18 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
9 the protective device reliability test
Explosive atmospheres - Part 5: Equipment protection by pressurized enclosure "p" GB/T 3836.5-2017 16.9
10 impact test Electrical apparatus for use in the presence of combustible dust—Part 7:Type of protection pD GB12476.7-2010 10.6
Explosive atmospheres - Part 5: Equipment protection by pressurized enclosure "p" GB/T 3836.5-2017
11 stucture tests Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p" IEC 60079-2:2014
Explosive atmospheres - Part 5: Equipment protection by pressurized enclosure "p" GB/T 3836.5-2017 18
12 stucture tests Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p" IEC 60079-2:2014 18
Electrical apparatus for explosive gas atmospheresPart 18: Intrinsically safe systems GB/T 3836.18-2017 8
1 Field wiring Explosive atmospheres - Part 25: Equipment protection by intrinsic safety "i" IEC60079-25 2010 8
Electrical apparatus for explosive gas atmospheresPart 18: Intrinsically safe systems GB/T 3836.18-2017 9
2Requirements of cables and multi-core cables Explosive atmospheres - Part 25: Equipment protection by intrinsic safety "i"
IEC60079-25 2010 9
Electrical apparatus for explosive gas atmospheresPart 18: Intrinsically safe systems GB/T 3836.18-2017 10
3Termination of intrinsically safe circuits Explosive atmospheres - Part 25: Equipment protection by intrinsic safety "i"
IEC60079-25 2010 10
Electrical apparatus for explosive gas atmospheresPart 18: Intrinsically safe systems GB/T 3836.18-2017 9
4Earthing and bonding of intrinsically safe systems Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC60079-25 2010 11
6 Intrinsically safe systems
5Protection against lightning and other
Electrical apparatus for explosive gas atmospheresPart 18: Intrinsically safe systems GB/T 3836.18-2017 10
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 19 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
electrical surges Explosive atmospheres - Part 25: Equipment protection by intrinsic safety "i" IEC60079-25 2010 12
Electrical apparatus for explosive gas atmospheresPart 18: Intrinsically safe systems GB/T 3836.18-2017 11
6Assessment of an intrinsically safe system Explosive atmospheres - Part 25: Equipment protection by intrinsic safety "i"
IEC60079-25 2010 13
Electrical apparatus for explosive gas atmospheresPart 18: Intrinsically safe systems GB/T 3836.18-2017 附录 A
7Assessment of a simple intrinsically safe system Explosive atmospheres - Part 25: Equipment protection by intrinsic safety "i"
IEC60079-25 2010 附录 A
Electrical apparatus for explosive gas atmospheresPart 18: Intrinsically safe systems GB/T 3836.18-2017 附录 B
8Assessment of circuits with more than one source of power Explosive atmospheres - Part 25: Equipment protection by intrinsic safety "i"
IEC60079-25 2010 附录 B
Electrical apparatus for explosive gas atmospheresPart 18: Intrinsically safe systems GB/T 3836.18-2017 附录 C
9
Interconnection of non-linear and linear intrinsically safe circuits
Explosive atmospheres - Part 25: Equipment protection by intrinsic safety "i" IEC60079-25 2010 附录 C
Electrical apparatus for explosive gas atmospheresPart 18: Intrinsically safe systems GB/T 3836.18-2017 附录 D
10 Verification of inductive parameters Explosive atmospheres - Part 25: Equipment protection by intrinsic safety "i"
IEC60079-25 2010 附录 D
Electrical apparatus for explosive gas atmospheresPart 18: Intrinsically safe systems GB/T 3836.18-2017 附录 G
11 Testing of cable electrical parameters Explosive atmospheres - Part 25: Equipment protection by intrinsic safety "i"
IEC60079-25 2010 附录 G
12 Use of simple apparatus in systems
Electrical apparatus for explosive gas atmospheresPart 18: Intrinsically safe systems GB/T 3836.18-2017 附录 H
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 20 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Explosive atmospheres - Part 25: Equipment protection by intrinsic safety "i" IEC60079-25 2010 附录 H
Electrical apparatus for explosive gas atmospheresPart 18: Intrinsically safe systems GB/T 3836.18-2017 附录 I
13 Use of simple apparatus in systems Explosive atmospheres - Part 25: Equipment protection by intrinsic safety "i"
IEC60079-25 2010 附录 I
Explosive atmospheres –Part 6: Equipment protection by liquid immersion "o" GB/T 3836.6-2017 4.5.4
1Verification of the degree of protection of the enclosure Explosive atmospheres –Part 6: Equipment protection by liquid immersion "o"
IEC 60079-6:2015 4.5.4
Explosive atmospheres – Part 6: Equipment protection by liquid immersion "o" GB/T 3836.6-2017 4.4
2 Creepage and clearance Explosive atmospheres – Part 6: Equipment protection by liquid immersion
"o" IEC 60079-6:2015 4.4
Explosive atmospheres –Part 6: Equipment protection by liquid immersion "o" GB/T 3836.6-2017 6.1.4
3 Maximum Temperature Test Explosive atmospheres –Part 6: Equipment protection by liquid immersion "o"
IEC 60079-6:2015 6.1.4
Explosive atmospheres –Part 6: Equipment protection by liquid immersion "o" GB/T 3836.6-2017 6.1.1
4 Overpressure test on sealed enclosures Explosive atmospheres –Part 6: Equipment protection by liquid immersion "o"
IEC 60079-6:2015 6.1.1
Explosive atmospheres –Part 6: Equipment protection by liquid immersion "o" GB/T 3836.6-2017 6. 1.2
5 Reduced pressure test on sealed enclosures Explosive atmospheres –Part 6: Equipment protection by liquid immersion "o"
IEC 60079-6:2015 6.1.2
Explosive atmospheres –Part 6: Equipment protection by liquid immersion "o" GB/T 3836.6-2017 6.1.3
7 liquid immersion "o"
6 Overpressure test on unsealed enclosures Explosive atmospheres –Part 6: Equipment protection by liquid immersion "o"
IEC 60079-6:2015 6.1.3
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 21 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Explosive atmospheres –Part 6: Equipment protection by liquid immersion "o" GB/T 3836.6-2017 6.1.5
7 Switching Test Explosive atmospheres –Part 6: Equipment protection by liquid immersion "o" IEC 60079-6:2015 6.1.5
Explosive atmospheres –Part 6: Equipment protection by liquid immersion "o" GB/T 3836.6-2017
8 stucture tests Explosive atmospheres –Part 6: Equipment protection by liquid immersion "o" IEC 60079-6:2015
Explosive atmospheres –Part 6: Equipment protection by liquid immersion "o" GB/T 3836.6-2017 7
9 stucture tests Explosive atmospheres –Part 6: Equipment protection by liquid immersion "o" IEC 60079-6:2015 7
Explosive atmospheres –Part 7: Equipment protection by powder filling “q” GB/T 3836.7-2017 4.3.1,4.8.3
1 Distances Explosive atmospheres –Part 5: Equipment protection by powder filling “q” IEC 60079-5:2015 4.3.1,4.8.3
Explosive atmospheres –Part 7: Equipment protection by powder filling “q” GB/T 3836.7-2017 5.1.1
2 Pressure type test of container Explosive atmospheres –Part 5: Equipment protection by powder filling “q”
IEC 60079-5:2015 5.1.1
Explosive atmospheres –Part 7: Equipment protection by powder filling “q” GB/T 3836.7-2017 5.1.2
3Verification of the degree of protection of the enclosure Explosive atmospheres –Part 5: Equipment protection by powder filling “q”
IEC 60079-5:2015 5.1.2
Explosive atmospheres –Part 7: Equipment protection by powder filling “q” GB/T 3836.7-2017 5.1.3
4Dielectric strength test of the filling material Explosive atmospheres –Part 5: Equipment protection by powder filling “q”
IEC 60079-5:2015 5.1.3
8 powder filling “q”
5 Maximum temperatures
Explosive atmospheres –Part 7: Equipment protection by powder filling “q” GB/T 3836.7-2017 5.1.4
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 22 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Explosive atmospheres –Part 5: Equipment protection by powder filling “q” IEC 60079-5:2015 5.1.4
Explosive atmospheres –Part 7: Equipment protection by powder filling “q” GB/T 3836.7-2017
6 stucture tests Explosive atmospheres –Part 5: Equipment protection by powder filling “q” IEC 60079.5-2015
Explosive atmospheres –Part 7: Equipment protection by powder filling “q” GB/T 3836.7-2017 6
7 stucture tests Explosive atmospheres –Part 5: Equipment protection by powder filling “q” IEC 60079.5-2015 6
Explosive atmospheres –Part 8: Equipment protection by type of protection "n" GB 3836.8-2014 22.3
1Tests for enclosures on which the type of protection depends Explosive atmospheres –Part 15: Equipment protection by type of protection
"n" IEC60079-15:2017 6.1
Explosive atmospheres –Part 8: Equipment protection by type of protection "n" GB 3836.8-2014 22.4
2Tests for enclosed break devices and non incendive components Explosive atmospheres –Part 15: Equipment protection by type of protection
"n" IEC60079-15:2017 11.1
Explosive atmospheres –Part 8: Equipment protection by type of protection "n" GB 3836.8-2014 22.5
3 Tests for sealed devices Explosive atmospheres –Part 15: Equipment protection by type of protection
"n" IEC60079-15:2017 11.2
Explosive atmospheres –Part 8: Equipment protection by type of protection "n" GB 3836.8-2014 22.6
4
Type test requirements for restricted-breathing enclosures
Explosive atmospheres –Part 15: Equipment protection by type of protection "n" IEC60079-15:2017 11.3
Explosive atmospheres –Part 8: Equipment protection by type of protection "n" GB 3836.8-2014 5
9 type of protection "n"
5 Maximum surface temperatures Explosive atmospheres –Part 15: Equipment protection by type of protection
"n" IEC60079-15:2017 5
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 23 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
6 Test for screw lampholders
Explosive atmospheres –Part 8: Equipment protection by type of protection "n" GB 3836.8-2014 22.7
7 Test for starter holders for luminaires
Explosive atmospheres –Part 8: Equipment protection by type of protection "n" GB 3836.8-2014 22.8
8
Tests for electronic starters for tubular fluorescent lamps and for ignitors forhigh pressure sodium or metal halide lamps
Explosive atmospheres –Part 8: Equipment protection by type of protection "n" GB 3836.8-2014 22.9
9
Test for wiring of luminaires subject to high-voltage impulses from ignitors
Explosive atmospheres –Part 8: Equipment protection by type of protection "n" GB 3836.8-2014 22.10
10 Mechanical shock test for batteries
Explosive atmospheres –Part 8: Equipment protection by type of protection "n" GB 3836.8-2014 22.11
11 Insulation resistance test for batteries
Explosive atmospheres –Part 8: Equipment protection by type of protection "n" GB 3836.8-2014 22.12
12Additional ignition tests for large or high-voltage machines
Explosive atmospheres –Part 8: Equipment protection by type of protection "n" GB 3836.8-2014 22.13
Explosive atmospheres –Part 8: Equipment protection by type of protection "n" GB 3836.8-2014
13 stucture tests Explosive atmospheres –Part 15: Equipment protection by type of protection "n" IEC60079-15:2017
Explosive atmospheres –Part 8: Equipment protection by type of protection "n" GB 3836.8-2014 24
14 stucture tests Explosive atmospheres –Part 15: Equipment protection by type of protection "n" IEC60079-15:2017 24
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 24 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Electrical apparatus for explosive gas atmospheres-Part 9: Encapsulation “m” GB 3836.9-2014 8.1.1
Electrical apparatus for use in the presence of combustible dust Part 6: Protection by encapsulation “mD” GB 12476.6-2010 8.1 1
Tests on the compound of Water absorption test Explosive atmospheres- Part 18: Equipment protection by encapsulation "m"
IEC 60079-18:2014+Amd 1:2017 CSV 8.1.1
Electrical apparatus for explosive gas atmospheres-Part 9: Encapsulation “m” GB 3836.9-2014 8.1.2
Electrical apparatus for use in the presence of combustible dust Part 6: Protection by encapsulation “mD” GB 12476.6-2010 8.1.2 2
Tests on the compound of Dielectric strength test Explosive atmospheres- Part 18: Equipment protection by encapsulation "m"
IEC 60079-18:2014+Amd 1:2017 CSV 8.1.2
Electrical apparatus for explosive gas atmospheres-Part 9: Encapsulation “m” GB 3836.9-2014 8.2.2
Electrical apparatus for use in the presence of combustible dust Part 6: Protection by encapsulation “mD” GB 12476.6-2010 8.2.2 3 Maximum
temperatureExplosive atmospheres- Part 18: Equipment protection by encapsulation "m" IEC 60079-18:2014+Amd 1:2017 CSV 8.2.2
Electrical apparatus for explosive gas atmospheres-Part 9: Encapsulation “m” GB 3836.9-2014 8.2.3
Explosive atmospheres- Part 18: Equipment protection by encapsulation "m" IEC 60079-18:2014+Amd 1:2017 CSV 8.2.3 4 Thermal endurance
testElectrical apparatus for use in the presence of combustible dust Part 6: Protection by encapsulation “mD” GB 12476.6-2010 8.2.3
Electrical apparatus for explosive gas atmospheres-Part 9: Encapsulation “m” GB 3836.9-2014 8.2.4
Explosive atmospheres- Part 18: Equipment protection by encapsulation "m" IEC 60079-18:2014+Amd 1:2017 CSV 8.2.4
10 Encapsulation “m”
5 Dielectric strength test
Electrical apparatus for use in the presence of combustible dust Part 6: Protection by encapsulation “mD” GB 12476.6-2010 8.2.4
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 25 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Electrical apparatus for explosive gas atmospheres-Part 9: Encapsulation “m” GB 3836.9-2014 8.2.5
Explosive atmospheres- Part 18: Equipment protection by encapsulation "m" IEC 60079-18:2014+Amd 1:2017 CSV 8.2.5 6 Cable pull test
Electrical apparatus for use in the presence of combustible dust Part 6: Protection by encapsulation “mD” GB 12476.6-2010 8.2.5
Electrical apparatus for explosive gas atmospheres-Part 9: Encapsulation “m” GB 3836.9-2014 8.2.6
Electrical apparatus for use in the presence of combustible dust Part 6: Protection by encapsulation “mD” GB 12476.6-2010 8.2.6 7
Pressure test for Group I and Group II electrical equipment Explosive atmospheres- Part 18: Equipment protection by encapsulation "m"
IEC 60079-18:2014+Amd 1:2017 CSV 8.2.6
Electrical apparatus for explosive gas atmospheres-Part 9: Encapsulation “m” GB 3836.9-2014 8.2.7
Explosive atmospheres- Part 18: Equipment protection by encapsulation "m" IEC 60079-18:2014+Amd 1:2017 CSV 8.2.7 8
Test for resettable thermal protective device Electrical apparatus for use in the presence of combustible dust Part 6:
Protection by encapsulation “mD” GB 12476.6-2010 8.2.7
Electrical apparatus for explosive gas atmospheres-Part 9: Encapsulation “m” GB 3836.9-2014 8.2.8
Electrical apparatus for use in the presence of combustible dust Part 6: Protection by encapsulation “mD” GB 12476.6-2010 8.2.8 9 Sealing test for build-
in protective devicesExplosive atmospheres- Part 18: Equipment protection by encapsulation "m" IEC 60079-18:2014+Amd 1:2017 CSV 8.2.8
Electrical apparatus for explosive gas atmospheres-Part 9: Encapsulation “m” GB 3836.9-2014
10 stucture tests Explosive atmospheres- Part 18: Equipment protection by encapsulation "m" IEC 60079-18:2014+Amd 1:2017 CSV
11 stucture tests Electrical apparatus for explosive gas atmospheres-Part 9: Encapsulation “m” GB 3836.9-2014 10
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 26 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Explosive atmospheres- Part 18: Equipment protection by encapsulation "m" IEC 60079-18:2014+Amd 1:2017 CSV 10
Electrical apparatus for explosive gas atmosphere-Part 17:Construction and use of rooms or buildings protected by pressurization GB 3836.17-2007 5
1 Room construction principle Explosive atmospheres –Part 13: Equipment protection by pressurized room
"p" and artificially ventilatedroom "v" IEC 60079-13:2017 4
Electrical apparatus for explosive gas atmosphere-Part 17:Construction and use of rooms or buildings protected by pressurization GB 3836.17-2007 6
2 Protection measures Explosive atmospheres –Part 13: Equipment protection by pressurized room "p" and artificially ventilatedroom "v" IEC 60079-13:2017 6.3
3 Overpressure and protect gas flow rate
Electrical apparatus for explosive gas atmosphere-Part 17:Construction and use of rooms or buildings protected by pressurization GB 3836.17-2007 7
4 Clean air supply Electrical apparatus for explosive gas atmosphere-Part 17:Construction and use of rooms or buildings protected by pressurization GB 3836.17-2007 8
5 pressurized rooms - Overpressure test
Explosive atmospheres –Part 13: Equipment protection by pressurized room "p" and artificially ventilatedroom "v" IEC 60079-13:2017 6.4.3
6 pressurized rooms - Purging test
Explosive atmospheres –Part 13: Equipment protection by pressurized room "p" and artificially ventilatedroom "v" IEC 60079-13:2017 6.4.4
7pressurized rooms - Minimum pressure differential test
Explosive atmospheres –Part 13: Equipment protection by pressurized room "p" and artificially ventilatedroom "v" IEC 60079-13:2017 6.4.5
8
pressurized rooms - Confirmation of the ratings of the safety devices
Explosive atmospheres –Part 13: Equipment protection by pressurized room "p" and artificially ventilatedroom "v" IEC 60079-13:2017 6.4.6
11
Rooms or buildings protected by pressurization
9
pressurized rooms - Verification of sequence of operation of the safety devices
Explosive atmospheres –Part 13: Equipment protection by pressurized room "p" and artificially ventilatedroom "v" IEC 60079-13:2017 6.4.7
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 27 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
10 artificially ventilated rooms - Purging test
Explosive atmospheres –Part 13: Equipment protection by pressurized room "p" and artificially ventilatedroom "v" IEC 60079-13:2017 7.5.3
11
artificially ventilated rooms - Minimum ventilation flow rate test
Explosive atmospheres –Part 13: Equipment protection by pressurized room "p" and artificially ventilatedroom "v" IEC 60079-13:2017 7.5.4
12
artificially ventilated rooms - Confirmation of the ratings of the safety devices
Explosive atmospheres –Part 13: Equipment protection by pressurized room "p" and artificially ventilatedroom "v" IEC 60079-13:2017 7.5.5
13
artificially ventilated rooms - Verification of sequence of operation of the safety devices
Explosive atmospheres –Part 13: Equipment protection by pressurized room "p" and artificially ventilatedroom "v" IEC 60079-13:2017 7.5.6
14artificially ventilated rooms - Testing of ventilation system
Explosive atmospheres –Part 13: Equipment protection by pressurized room "p" and artificially ventilatedroom "v" IEC 60079-13:2017 7.5.7
15 stucture tests Explosive atmospheres –Part 13: Equipment protection by pressurized room "p" and artificially ventilatedroom "v" IEC 60079-13:2017
1 Test for resistance to impact
Electrical apparatus for use in the presence of combustible dust Part 0: General requirements GB 12476.1-2013 23.4.2.1
2 Drop test Electrical apparatus for use in the presence of combustible dust Part 0: General requirements GB 12476.1-2013 23.4.2.2
3Test for dust exclusion (degree of protection)
Electrical apparatus for use in the presence of combustible dust Part 0: General requirements GB 12476.1-2013 23.4.3 12
Electrical apparatus for use in the presence of combustible dust
4Torque test for bushings in enclosures for use in
Electrical apparatus for use in the presence of combustible dust Part 0: General requirements GB 12476.1-2013 23.4.4
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 28 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Zone 20 or 21
5Measurement for maximum surface temperature
Electrical apparatus for use in the presence of combustible dust Part 0: General requirements GB 12476.1-2013 23.4.4.1
6Measurement for surface temperature under excess layer
Electrical apparatus for use in the presence of combustible dust Part 0: General requirements GB 12476.1-2013 23.4.4.2
7 Thermal shock test Electrical apparatus for use in the presence of combustible dust Part 0: General requirements GB 12476.1-2013 23.4.5
8
Heat resistance test for plastic enclosures or parts for use in Zone 20 or 21
Electrical apparatus for use in the presence of combustible dust Part 0: General requirements GB 12476.1-2013 23.4.6.3
9
Cold resistance test for plastic enclosures or parts for use in Zone 20 or 21
Electrical apparatus for use in the presence of combustible dust Part 0: General requirements GB 12476.1-2013 23.4.6.4
10
Resistance test to light for plastic enclosures or parts for use in Zone 20 or 21
Electrical apparatus for use in the presence of combustible dust Part 0: General requirements GB 12476.1-2013 23.4.6.5
11
Mechanical tests for plastic enclosures or parts for use in Zone 20 or 21
Electrical apparatus for use in the presence of combustible dust Part 0: General requirements GB 12476.1-2013 23.4.6.6
12
Surface resistance test for plastic enclosures or parts for use in Zone 20 or 21
Electrical apparatus for use in the presence of combustible dust Part 0: General requirements GB 12476.1-2013 23.4.6.7
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 29 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
13 Aging test of elastic sealing ring Materials
Electrical apparatus for use in the presence of combustible dust Part 0: General requirements GB 12476.1-2013 23.4.6.8
Electrical apparatus for use in the presence of combustible dust Part 5: Protection by enclosures "tD" GB 12476.5—2013 7.1
14 JointsExplosive atmospheres –Part 31: Equipment dust ignition protection by enclosure "t" IEC 60079-31:2013 5.1
Electrical apparatus for use in the presence of combustible dust Part 5: Protection by enclosures "tD" GB 12476.5—2013 7.2
15 Joystick, spindle or shaft Explosive atmospheres –Part 31: Equipment dust ignition protection by
enclosure "t" IEC 60079-31:2013 5.1.5
Electrical apparatus for use in the presence of combustible dust Part 5: Protection by enclosures "tD" GB 12476.5—2013 7.3
16 Clearance of boltsExplosive atmospheres –Part 31: Equipment dust ignition protection by enclosure "t" IEC 60079-31:2013 5.3
17Impact test for supplementary enclosures
Explosive atmospheres –Part 31: Equipment dust ignition protection by enclosure "t" IEC 60079-31:2013 6.1.1.2
18 Pressure test Explosive atmospheres –Part 31: Equipment dust ignition protection by enclosure "t" IEC 60079-31:2013 6.1.1.3
Electrical apparatus for use in the presence of combustible dust Part 5: Protection by enclosures "tD" GB 12476.5—2013 8.2.1
19 Test for dust exclusion Explosive atmospheres –Part 31: Equipment dust ignition protection by
enclosure "t" IEC 60079-31:2013 6.1.1.4
Electrical apparatus for use in the presence of combustible dust Part 5: Protection by enclosures "tD" GB 12476.5—2013 8.2.2
20 Thermal testsExplosive atmospheres –Part 31: Equipment dust ignition protection by enclosure "t" IEC 60079-31:2013 6.1.2
13
Equipment with equipment protection level
1 type testExplosive atmospheres―Part 13: Equipment repair, overhaul and reclamation GB 3836.13-2013 4
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 30 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Explosive atmospheres – Part 19: Equipment repair, overhaul and reclamation IEC 60079-19:2010 4
Explosive atmospheres―Part 13: Equipment repair, overhaul and reclamation GB 3836.13-2013 5
2 type test of "d" Explosive atmospheres – Part 19: Equipment repair, overhaul and reclamation IEC 60079-19:2010 5
Explosive atmospheres―Part 13: Equipment repair, overhaul and reclamation GB 3836.13-2013 6
3 type test of "I" Explosive atmospheres – Part 19: Equipment repair, overhaul and reclamation IEC 60079-19:2010 6
Explosive atmospheres―Part 13: Equipment repair, overhaul and reclamation GB 3836.13-2013 7
4 type test of "p" Explosive atmospheres – Part 19: Equipment repair, overhaul and reclamation IEC 60079-19:2010 7
Explosive atmospheres―Part 13: Equipment repair, overhaul and reclamation GB 3836.13-2013 8
5 type test of "e" Explosive atmospheres – Part 19: Equipment repair, overhaul and reclamation IEC 60079-19:2010 8
Explosive atmospheres―Part 13: Equipment repair, overhaul and reclamation GB 3836.13-2013 9
(EPL) Ga
6 type test of "n" Explosive atmospheres – Part 19: Equipment repair, overhaul and reclamation IEC 60079-19:2010 9
Explosive atmospheres –Part 24: Equipment protection by special protection “s” GB/T 3836.24-2017 11.2
14
Equipment protection by special protection “s”
1 Temperature measurement test Explosive atmospheres –Part 33: Equipment protection by special protection
“s” IEC 60079-33:2012
1 Construction check Explosive atmospheres—Part 15: Electrical installations design, selection and erection GB/T 3836.15-2017 5,6,7,8,9
15
Explosive environmental electrical Devices 2 minimum distance Explosive atmospheres—Part 15: Electrical installations design, selection and
erection GB/T 3836.15-2017 12.3
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 31 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
3 Temperature evaluation
Explosive atmospheres—Part 15: Electrical installations design, selection and erection GB/T 3836.15-2017 5
1 Check the mechanicalFlameproof three-phase asynchronous motor technology conditions Part 1: YB3 series flameproof three-phase asynchronous motor JB/T7565.1-2011 5.8、5.9
2 Insulation resistance test for batteries
Flameproof three-phase asynchronous motor technology conditions Part 1: YB3 series flameproof three-phase asynchronous motor JB/T7565.1-2011 4.15
3 Cold dc resistance measurement
Flameproof three-phase asynchronous motor technology conditions Part 1: YB3 series flameproof three-phase asynchronous motor JB/T7565.1-2011 5.3
4 Withstand voltage testFlameproof three-phase asynchronous motor technology conditions Part 1: YB3 series flameproof three-phase asynchronous motor JB/T7565.1-2011 4.16
5 The turn-to-turn insulation test
Flameproof three-phase asynchronous motor technology conditions Part 1: YB3 series flameproof three-phase asynchronous motor JB/T7565.1-2011 4.17
6Verification of the degree of protection of the enclosure
Flameproof three-phase asynchronous motor technology conditions Part 1: YB3 series flameproof three-phase asynchronous motor JB/T7565.1-2011 5.11
7 40 ℃ alternating hot and humid test
Flameproof three-phase asynchronous motor technology conditions Part 1: YB3 series flameproof three-phase asynchronous motor JB/T7565.1-2011 4.18
under(950×950×1100)mm product
8 Check the mechanical
Flameproof three-phase asynchronous motor technology conditions Part 2: YB3-W、YB3-TH、YB3-THW、YB3-TA、YB3-TAWseries flameproof three-phase asynchronous motor (stand no. 63 ~ 355) JB/T 7565.2-2015 5.2、5.3
16
Flameproof three-phase asynchronous motor
9 insulation test Flameproof three-phase asynchronous motor technology conditions Part 2: YB3-W、YB3-TH、YB3-THW、YB3-TA、YB3-TAWseries flameproof
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 32 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
three-phase asynchronous motor (stand no. 63 ~ 355) JB/T 7565.2-2015 5.1
10 Cold dc resistance measurement
Flameproof three-phase asynchronous motor technology conditions Part 2: YB3-W、YB3-TH、YB3-THW、YB3-TA、YB3-TAWseries flameproof three-phase asynchronous motor (stand no. 63 ~ 355) JB/T 7565.2-2015 5.1
11 Withstand voltage testFlameproof three-phase asynchronous motor technology conditions Part 2: YB3-W、YB3-TH、YB3-THW、YB3-TA、YB3-TAWseries flameproof three-phase asynchronous motor (stand no. 63 ~ 355) JB/T 7565.2-2015 5.1
12 The turn-to-turn insulation test
Flameproof three-phase asynchronous motor technology conditions Part 2: YB3-W、YB3-TH、YB3-THW、YB3-TA、YB3-TAWseries flameproof three-phase asynchronous motor (stand no. 63 ~ 355) JB/T 7565.2-2015 5.4
13 Presure test(water)Flameproof three-phase asynchronous motor technology conditions Part 2: YB3-W、YB3-TH、YB3-THW、YB3-TA、YB3-TAWseries flameproof three-phase asynchronous motor (stand no. 63 ~ 355) JB/T 7565.2-2015 5.8
14 Flameproof structure test
Flameproof three-phase asynchronous motor technology conditions Part 2: YB3-W、YB3-TH、YB3-THW、YB3-TA、YB3-TAWseries flameproof three-phase asynchronous motor (stand no. 63 ~ 355) JB/T 7565.2-2015 5.9
15 clearanceand creepage distance
Flameproof three-phase asynchronous motor technology conditions Part 2: YB3-W、YB3-TH、YB3-THW、YB3-TA、YB3-TAWseries flameproof three-phase asynchronous motor (stand no. 63 ~ 355) JB/T 7565.2-2015 5.9
16 tempreture testFlameproof three-phase asynchronous motor technology conditions Part 2: YB3-W、YB3-TH、YB3-THW、YB3-TA、YB3-TAWseries flameproof three-phase asynchronous motor (stand no. 63 ~ 355) JB/T 7565.2-2015 5.10
17 damp and heat testFlameproof three-phase asynchronous motor technology conditions Part 2: YB3-W、YB3-TH、YB3-THW、YB3-TA、YB3-TAWseries flameproof three-phase asynchronous motor (stand no. 63 ~ 355) JB/T 7565.2-2015 5.11
under(950×950×1100)mm product
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 33 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
18Verification of the degree of protection of the enclosure
Flameproof three-phase asynchronous motor technology conditions Part 2: YB3-W、YB3-TH、YB3-THW、YB3-TA、YB3-TAWseries flameproof three-phase asynchronous motor (stand no. 63 ~ 355) JB/T 7565.2-2015 5.12
19 salt endurance to NaCl
Flameproof three-phase asynchronous motor technology conditions Part 2: YB3-W、YB3-TH、YB3-THW、YB3-TA、YB3-TAWseries flameproof three-phase asynchronous motor (stand no. 63 ~ 355) JB/T 7565.2-2015 5.14
20 thermal endurance to cold
Flameproof three-phase asynchronous motor technology conditions Part 2: YB3-W、YB3-TH、YB3-THW、YB3-TA、YB3-TAWseries flameproof three-phase asynchronous motor (stand no. 63 ~ 355) JB/T 7565.2-2015 5.13
21 Test of Explosion-proof Function
Flameproof three-phase asynchronous motor technology conditions Part 2: YB3-W、YB3-TH、YB3-THW、YB3-TA、YB3-TAWseries flameproof three-phase asynchronous motor (stand no. 63 ~ 355) JB/T 7565.2-2015 5.17
22 Check the mechanicalFlameproof three-phase asynchronous motor technology conditions Part 3: YB3-F1、YB3-WF1、YB3-F2、YB3-WF2 series anticorrosion, outdoor flameproof three-phase asynchronous motor JB/T 7565.3-2015 5.2、5.3
23 insulation testFlameproof three-phase asynchronous motor technology conditions Part 3: YB3-F1、YB3-WF1、YB3-F2、YB3-WF2 series anticorrosion, outdoor flameproof three-phase asynchronous motor JB/T 7565.3-2015 5.1
24 Cold dc resistance measurement
Flameproof three-phase asynchronous motor technology conditions Part 3: YB3-F1、YB3-WF1、YB3-F2、YB3-WF2 series anticorrosion, outdoor flameproof three-phase asynchronous motor JB/T 7565.3-2015 5.1
25 Withstand voltage testFlameproof three-phase asynchronous motor technology conditions Part 3: YB3-F1、YB3-WF1、YB3-F2、YB3-WF2 series anticorrosion, outdoor flameproof three-phase asynchronous motor JB/T 7565.3-2015 5.1
26 The turn-to-turn insulation test
Flameproof three-phase asynchronous motor technology conditions Part 3: YB3-F1、YB3-WF1、YB3-F2、YB3-WF2 series anticorrosion, outdoor flameproof three-phase asynchronous motor JB/T 7565.3-2015 5.4
27 Presure test(water) Flameproof three-phase asynchronous motor technology conditions Part 3: YB3-F1、YB3-WF1、YB3-F2、YB3-WF2 series anticorrosion, outdoor
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 34 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
flameproof three-phase asynchronous motor JB/T 7565.3-2015 5.8
28 Flameproof structure test
Flameproof three-phase asynchronous motor technology conditions Part 3: YB3-F1、YB3-WF1、YB3-F2、YB3-WF2 series anticorrosion, outdoor flameproof three-phase asynchronous motor JB/T 7565.3-2015 5.9
29 clearanceand creepage distance
Flameproof three-phase asynchronous motor technology conditions Part 3: YB3-F1、YB3-WF1、YB3-F2、YB3-WF2 series anticorrosion, outdoor flameproof three-phase asynchronous motor JB/T 7565.3-2015 5.9
30 tempreture testFlameproof three-phase asynchronous motor technology conditions Part 3: YB3-F1、YB3-WF1、YB3-F2、YB3-WF2 series anticorrosion, outdoor flameproof three-phase asynchronous motor JB/T 7565.3-2015 5.10
31 damp and heat testFlameproof three-phase asynchronous motor technology conditions Part 3: YB3-F1、YB3-WF1、YB3-F2、YB3-WF2 series anticorrosion, outdoor flameproof three-phase asynchronous motor JB/T 7565.3-2015 5.11
under(950×950×1100)mm product
32Verification of the degree of protection of the enclosure
Flameproof three-phase asynchronous motor technology conditions Part 3: YB3-F1、YB3-WF1、YB3-F2、YB3-WF2 series anticorrosion, outdoor flameproof three-phase asynchronous motor JB/T 7565.3-2015 5.12
33 thermal endurance to cold
Flameproof three-phase asynchronous motor technology conditions Part 3: YB3-F1、YB3-WF1、YB3-F2、YB3-WF2 series anticorrosion, outdoor flameproof three-phase asynchronous motor JB/T 7565.3-2015 5.15
34 Test of Explosion-proof Function
Flameproof three-phase asynchronous motor technology conditions Part 3: YB3-F1、YB3-WF1、YB3-F2、YB3-WF2 series anticorrosion, outdoor flameproof three-phase asynchronous motor JB/T 7565.3-2015 5.17
35 Check the mechanicalFlameproof three-phase asynchronous motor technology conditions Part 4: series YB3 flameproof (Exd Ⅱ CT1 ~ T4) three-phase asynchronous moto JB/T 7565.4-2015 5.2、5.3
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 35 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
36 Insulation testFlameproof three-phase asynchronous motor technology conditions Part 4: series YB3 flameproof (Exd Ⅱ CT1 ~ T4) three-phase asynchronous moto JB/T 7565.4-2015 5.1
37 Cold dc resistance measurement
Flameproof three-phase asynchronous motor technology conditions Part 4: series YB3 flameproof (Exd Ⅱ CT1 ~ T4) three-phase asynchronous moto JB/T 7565.4-2015 5.1
38 Withstand voltage testFlameproof three-phase asynchronous motor technology conditions Part 4: series YB3 flameproof (Exd Ⅱ CT1 ~ T4) three-phase asynchronous moto JB/T 7565.4-2015 5.1
39 The turn-to-turn insulation test
Flameproof three-phase asynchronous motor technology conditions Part 4: series YB3 flameproof (Exd Ⅱ CT1 ~ T4) three-phase asynchronous moto JB/T 7565.4-2015 5.4
40 clearanceand creepage distance
Flameproof three-phase asynchronous motor technology conditions Part 4: series YB3 flameproof (Exd Ⅱ CT1 ~ T4) three-phase asynchronous moto JB/T 7565.4-2015 5.9
41 tempreture testFlameproof three-phase asynchronous motor technology conditions Part 4: series YB3 flameproof (Exd Ⅱ CT1 ~ T4) three-phase asynchronous moto JB/T 7565.4-2015 5.10
42 damp and heat testFlameproof three-phase asynchronous motor technology conditions Part 4: series YB3 flameproof (Exd Ⅱ CT1 ~ T4) three-phase asynchronous moto JB/T 7565.4-2015 5.11
under(950×950×1100)mm product
43Verification of the degree of protection of the enclosure
Flameproof three-phase asynchronous motor technology conditions Part 4: series YB3 flameproof (Exd Ⅱ CT1 ~ T4) three-phase asynchronous moto JB/T 7565.4-2015 5.12
44 thermal endurance to cold
Flameproof three-phase asynchronous motor technology conditions Part 4: series YB3 flameproof (Exd Ⅱ CT1 ~ T4) three-phase asynchronous moto JB/T 7565.4-2015 5.13
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 36 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
45 Check the mechanicalFlameproof three-phase asynchronous motor technology conditions Part 5: YBF3 series fan with flameproof three-phase asynchronous motor JB/T 7565.5-2015 5.2、5.3
46 insulation testFlameproof three-phase asynchronous motor technology conditions Part 5: YBF3 series fan with flameproof three-phase asynchronous motor JB/T 7565.5-2015 5.1
47 Cold dc resistance measurement
Flameproof three-phase asynchronous motor technology conditions Part 5: YBF3 series fan with flameproof three-phase asynchronous motor JB/T 7565.5-2015 5.1
48 Withstand voltage testFlameproof three-phase asynchronous motor technology conditions Part 5: YBF3 series fan with flameproof three-phase asynchronous motor JB/T 7565.5-2015 5.1
49 The turn-to-turn insulation test
Flameproof three-phase asynchronous motor technology conditions Part 5: YBF3 series fan with flameproof three-phase asynchronous motor JB/T 7565.5-2015 5.4
50 Presure test(water)Flameproof three-phase asynchronous motor technology conditions Part 5: YBF3 series fan with flameproof three-phase asynchronous motor JB/T 7565.5-2015 5.8
51 Flameproof structure test
Flameproof three-phase asynchronous motor technology conditions Part 5: YBF3 series fan with flameproof three-phase asynchronous motor JB/T 7565.5-2015 5.9
52 clearanceand creepage distance
Flameproof three-phase asynchronous motor technology conditions Part 5: YBF3 series fan with flameproof three-phase asynchronous motor JB/T 7565.5-2015 5.9
53 tempreture testFlameproof three-phase asynchronous motor technology conditions Part 5: YBF3 series fan with flameproof three-phase asynchronous motor JB/T 7565.5-2015 5.10
54 damp and heat testFlameproof three-phase asynchronous motor technology conditions Part 5: YBF3 series fan with flameproof three-phase asynchronous motor JB/T 7565.5-2015 5.11
under(950×950×1100)
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 37 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
mm product
55Verification of the degree of protection of the enclosure
Flameproof three-phase asynchronous motor technology conditions Part 5: YBF3 series fan with flameproof three-phase asynchronous motor JB/T 7565.5-2015 5.12
56 Check the mechanicalFlameproof three-phase asynchronous motor technology conditions Part 6:YB3-Hseries Marine flameproof three-phase asynchronous motor JB/T7565.6-2015 5.2、5.3
57 insulation testFlameproof three-phase asynchronous motor technology conditions Part 6:YB3-Hseries Marine flameproof three-phase asynchronous motor JB/T7565.6-2015 5.1
58 Cold dc resistance measurement
Flameproof three-phase asynchronous motor technology conditions Part 6:YB3-Hseries Marine flameproof three-phase asynchronous motor JB/T7565.6-2015 5.1
59 Withstand voltage testFlameproof three-phase asynchronous motor technology conditions Part 6:YB3-Hseries Marine flameproof three-phase asynchronous motor JB/T7565.6-2015 5.1
60 The turn-to-turn insulation test
Flameproof three-phase asynchronous motor technology conditions Part 6:YB3-Hseries Marine flameproof three-phase asynchronous motor JB/T7565.6-2015 5.4
61 Presure test(water)Flameproof three-phase asynchronous motor technology conditions Part 6:YB3-Hseries Marine flameproof three-phase asynchronous motor JB/T7565.6-2015 5.8
62 Flameproof structure test
Flameproof three-phase asynchronous motor technology conditions Part 6:YB3-Hseries Marine flameproof three-phase asynchronous motor JB/T7565.6-2015 5.9
63 clearanceand creepage distance
Flameproof three-phase asynchronous motor technology conditions Part 6:YB3-Hseries Marine flameproof three-phase asynchronous motor JB/T7565.6-2015 5.9
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 38 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
64 tempreture testFlameproof three-phase asynchronous motor technology conditions Part 6:YB3-Hseries Marine flameproof three-phase asynchronous motor JB/T7565.6-2015 5.16
65Verification of the degree of protection of the enclosure
Flameproof three-phase asynchronous motor technology conditions Part 6:YB3-Hseries Marine flameproof three-phase asynchronous motor JB/T7565.6-2015 5.14
66 Test of Explosion-proof Function
Flameproof three-phase asynchronous motor technology conditions Part 6:YB3-Hseries Marine flameproof three-phase asynchronous motor JB/T7565.6-2015 5.17
67 Check the mechanicalFlameproof three-phase asynchronous motor technology conditions Part 7: YBGB3、YBGB3-W series pipeline pump, outdoor pipeline pump with flameproof three-phase asynchronous motor JB/T7565.7-2016 5.2、5.3
68 insulation testFlameproof three-phase asynchronous motor technology conditions Part 7: YBGB3、YBGB3-W series pipeline pump, outdoor pipeline pump with flameproof three-phase asynchronous motor JB/T7565.7-2016 5.1
69 Cold dc resistance measurement
Flameproof three-phase asynchronous motor technology conditions Part 7: YBGB3、YBGB3-W series pipeline pump, outdoor pipeline pump with flameproof three-phase asynchronous motor JB/T7565.7-2016 5.1
70 Withstand voltage testFlameproof three-phase asynchronous motor technology conditions Part 7: YBGB3、YBGB3-W series pipeline pump, outdoor pipeline pump with flameproof three-phase asynchronous motor JB/T7565.7-2016 5.1
71 The turn-to-turn insulation test
Flameproof three-phase asynchronous motor technology conditions Part 7: YBGB3、YBGB3-W series pipeline pump, outdoor pipeline pump with flameproof three-phase asynchronous motor JB/T7565.7-2016 5.4
72 Presure test(water)Flameproof three-phase asynchronous motor technology conditions Part 7: YBGB3、YBGB3-W series pipeline pump, outdoor pipeline pump with flameproof three-phase asynchronous motor JB/T7565.7-2016 5.8
73 Flameproof structure test
Flameproof three-phase asynchronous motor technology conditions Part 7: YBGB3、YBGB3-W series pipeline pump, outdoor pipeline pump with
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 39 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
flameproof three-phase asynchronous motor JB/T7565.7-2016 5.9
74 clearanceand creepage distance
Flameproof three-phase asynchronous motor technology conditions Part 7: YBGB3、YBGB3-W series pipeline pump, outdoor pipeline pump with flameproof three-phase asynchronous motor JB/T7565.7-2016 5.9
75 tempreture testFlameproof three-phase asynchronous motor technology conditions Part 7: YBGB3、YBGB3-W series pipeline pump, outdoor pipeline pump with flameproof three-phase asynchronous motor JB/T7565.7-2016 5.10
76 damp and heat testFlameproof three-phase asynchronous motor technology conditions Part 7: YBGB3、YBGB3-W series pipeline pump, outdoor pipeline pump with flameproof three-phase asynchronous motor JB/T7565.7-2016 5.11
under(950×950×1100)mm product
77Verification of the degree of protection of the enclosure
Flameproof three-phase asynchronous motor technology conditions Part 7: YBGB3、YBGB3-W series pipeline pump, outdoor pipeline pump with flameproof three-phase asynchronous motor JB/T7565.7-2016 5.12
78 Test of Explosion-proof Function
Flameproof three-phase asynchronous motor technology conditions Part 7: YBGB3、YBGB3-W series pipeline pump, outdoor pipeline pump with flameproof three-phase asynchronous motor JB/T7565.7-2016 5.17
1 Check the mechanicalIncreased safety type three-phase asynchronous motor technology conditions Part 1: increase YA2 series three-phase asynchronous motor (stand no. 80-280) JB/T 9595.1-2015 5.2、5.3
2 insulation testIncreased safety type three-phase asynchronous motor technology conditions Part 1: increase YA2 series three-phase asynchronous motor (stand no. 80-280) JB/T 9595.1-2015 5.1
3 Cold dc resistance measurement
Increased safety type three-phase asynchronous motor technology conditions Part 1: increase YA2 series three-phase asynchronous motor (stand no. 80-280) JB/T 9595.1-2015 5.1
17
Increased safety type three-phase asynchronous motor
4 Withstand voltage test Increased safety type three-phase asynchronous motor technology conditions Part 1: increase YA2 series three-phase asynchronous motor (stand no. 80-
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 40 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
280) JB/T 9595.1-2015 5.1
5 The turn-to-turn insulation test
Increased safety type three-phase asynchronous motor technology conditions Part 1: increase YA2 series three-phase asynchronous motor (stand no. 80-280) JB/T 9595.1-2015 5.4
6 clearanceand creepage distance
Increased safety type three-phase asynchronous motor technology conditions Part 1: increase YA2 series three-phase asynchronous motor (stand no. 80-280) JB/T 9595.1-2015 5.8
7 tempreture testIncreased safety type three-phase asynchronous motor technology conditions Part 1: increase YA2 series three-phase asynchronous motor (stand no. 80-280) JB/T 9595.1-2015 5.9
8 Time test of tEIncreased safety type three-phase asynchronous motor technology conditions Part 1: increase YA2 series three-phase asynchronous motor (stand no. 80-280) JB/T 9595.1-2015 5.10
under 160kW motor
9 damp and heat testIncreased safety type three-phase asynchronous motor technology conditions Part 1: increase YA2 series three-phase asynchronous motor (stand no. 80-280) JB/T 9595.1-2015 5.11
under(950×950×1100)mm product
10Verification of the degree of protection of the enclosure
Increased safety type three-phase asynchronous motor technology conditions Part 1: increase YA2 series three-phase asynchronous motor (stand no. 80-280) JB/T 9595.1-2015 5.12
11 Minimum path to unilateral air gap
Increased safety type three-phase asynchronous motor technology conditions Part 1: increase YA2 series three-phase asynchronous motor (stand no. 80-280) JB/T 9595.1-2015 5.13
12 Test of Explosion-proof Function
Increased safety type three-phase asynchronous motor technology conditions Part 1: increase YA2 series three-phase asynchronous motor (stand no. 80-280) JB/T 9595.1-2015 5.14
13 Check the mechanical Increased safety type three-phase asynchronous motor technology conditions Part 2: YA2 - W, YA2 WF1, YA2 WF2, YA2 - F1, YA2 - F2 series outdoor,
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 41 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
outdoor anti-corrosion, anti-corrosion increased safety type three-phase asynchronous motor (stand no. 80-280) JB/T 9595.2-2015 5.2、5.3
14 insulation test
Increased safety type three-phase asynchronous motor technology conditions Part 2: YA2 - W, YA2 WF1, YA2 WF2, YA2 - F1, YA2 - F2 series outdoor, outdoor anti-corrosion, anti-corrosion increased safety type three-phase asynchronous motor (stand no. 80-280) JB/T 9595.2-2015 5.1
15 Cold dc resistance measurement
Increased safety type three-phase asynchronous motor technology conditions Part 2: YA2 - W, YA2 WF1, YA2 WF2, YA2 - F1, YA2 - F2 series outdoor, outdoor anti-corrosion, anti-corrosion increased safety type three-phase asynchronous motor (stand no. 80-280) JB/T 9595.2-2015 5.1
16 Withstand voltage test
Increased safety type three-phase asynchronous motor technology conditions Part 2: YA2 - W, YA2 WF1, YA2 WF2, YA2 - F1, YA2 - F2 series outdoor, outdoor anti-corrosion, anti-corrosion increased safety type three-phase asynchronous motor (stand no. 80-280) JB/T 9595.2-2015 5.1
17 The turn-to-turn insulation test
Increased safety type three-phase asynchronous motor technology conditions Part 2: YA2 - W, YA2 WF1, YA2 WF2, YA2 - F1, YA2 - F2 series outdoor, outdoor anti-corrosion, anti-corrosion increased safety type three-phase asynchronous motor (stand no. 80-280) JB/T 9595.2-2015 5.4
18 clearanceand creepage distance
Increased safety type three-phase asynchronous motor technology conditions Part 2: YA2 - W, YA2 WF1, YA2 WF2, YA2 - F1, YA2 - F2 series outdoor, outdoor anti-corrosion, anti-corrosion increased safety type three-phase asynchronous motor (stand no. 80-280) JB/T 9595.2-2015 5.8
19 tempreture test
Increased safety type three-phase asynchronous motor technology conditions Part 2: YA2 - W, YA2 WF1, YA2 WF2, YA2 - F1, YA2 - F2 series outdoor, outdoor anti-corrosion, anti-corrosion increased safety type three-phase asynchronous motor (stand no. 80-280) JB/T 9595.2-2015 5.9
20 Time test of tE
Increased safety type three-phase asynchronous motor technology conditions Part 2: YA2 - W, YA2 WF1, YA2 WF2, YA2 - F1, YA2 - F2 series outdoor, outdoor anti-corrosion, anti-corrosion increased safety type three-phase asynchronous motor (stand no. 80-280) JB/T 9595.2-2015 5.10
under 160kW motor
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 42 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
21 damp and heat test
Increased safety type three-phase asynchronous motor technology conditions Part 2: YA2 - W, YA2 WF1, YA2 WF2, YA2 - F1, YA2 - F2 series outdoor, outdoor anti-corrosion, anti-corrosion increased safety type three-phase asynchronous motor (stand no. 80-280) JB/T 9595.2-2015 5.11
under(950×950×1100)mm product
22Verification of the degree of protection of the enclosure
Increased safety type three-phase asynchronous motor technology conditions Part 2: YA2 - W, YA2 WF1, YA2 WF2, YA2 - F1, YA2 - F2 series outdoor, outdoor anti-corrosion, anti-corrosion increased safety type three-phase asynchronous motor (stand no. 80-280) JB/T 9595.2-2015 5.12
23 Minimum path to unilateral air gap
Increased safety type three-phase asynchronous motor technology conditions Part 2: YA2 - W, YA2 WF1, YA2 WF2, YA2 - F1, YA2 - F2 series outdoor, outdoor anti-corrosion, anti-corrosion increased safety type three-phase asynchronous motor (stand no. 80-280) JB/T 9595.2-2015 5.13
24 thermal endurance to cold
Increased safety type three-phase asynchronous motor technology conditions Part 2: YA2 - W, YA2 WF1, YA2 WF2, YA2 - F1, YA2 - F2 series outdoor, outdoor anti-corrosion, anti-corrosion increased safety type three-phase asynchronous motor (stand no. 80-280) JB/T 9595.2-2015 5.14
25 Test of Explosion-proof Function
Increased safety type three-phase asynchronous motor technology conditions Part 2: YA2 - W, YA2 WF1, YA2 WF2, YA2 - F1, YA2 - F2 series outdoor, outdoor anti-corrosion, anti-corrosion increased safety type three-phase asynchronous motor (stand no. 80-280) JB/T 9595.2-2015 5.16
26 Check the mechanical YA, YA, YA - W - increase WF1 series three-phase asynchronous motor (stand no. 315 ~ 450) technical conditions JB/T8972-2011 5.1
27 insulation test YA, YA, YA - W - increase WF1 series three-phase asynchronous motor (stand no. 315 ~ 450) technical conditions JB/T8972-2011 5.2
28 Cold dc resistance measurement
YA, YA, YA - W - increase WF1 series three-phase asynchronous motor (stand no. 315 ~ 450) technical conditions JB/T8972-2011 5.2
29 Withstand voltage test YA, YA, YA - W - increase WF1 series three-phase asynchronous motor (stand no. 315 ~ 450) technical conditions JB/T8972-2011 5.2
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 43 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
30 The turn-to-turn insulation test
YA, YA, YA - W - increase WF1 series three-phase asynchronous motor (stand no. 315 ~ 450) technical conditions JB/T8972-2011 5.3
31 tempreture test YA, YA, YA - W - increase WF1 series three-phase asynchronous motor (stand no. 315 ~ 450) technical conditions JB/T8972-2011 5.7
32 Time test of tE YA, YA, YA - W - increase WF1 series three-phase asynchronous motor (stand no. 315 ~ 450) technical conditions JB/T8972-2011 5.8
under 160kW motor
33 damp and heat test YA, YA, YA - W - increase WF1 series three-phase asynchronous motor (stand no. 315 ~ 450) technical conditions JB/T8972-2011 5.10
under(950×950×1100)mm product
34Verification of the degree of protection of the enclosure
YA, YA, YA - W - increase WF1 series three-phase asynchronous motor (stand no. 315 ~ 450) technical conditions JB/T8972-2011 5.9
35 Minimum path to unilateral air gap
YA, YA, YA - W - increase WF1 series three-phase asynchronous motor (stand no. 315 ~ 450) technical conditions JB/T8972-2011 5.11
36 thermal endurance to cold
YA, YA, YA - W - increase WF1 series three-phase asynchronous motor (stand no. 315 ~ 450) technical conditions JB/T8972-2011 5.12
Explosive atmospheres - Part 20: Equipment with equipment protection level (EPL) Ga GB 3836. 20-2011 5.1
1 type test Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga IEC 60079-26:2014 5.1
Explosive atmospheres - Part 20: Equipment with equipment protection level (EPL) Ga GB 3836. 20-2011 5.2
2 Separation elements Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga IEC 60079-26:2014 5.2
18
Equipment with equipment protection level (EPL) Ga
3 type testTemperature evaluation
Explosive atmospheres - Part 20: Equipment with equipment protection level (EPL) Ga GB3836. 20-2011 5.3
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 44 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga IEC 60079-26:2014 5.3
1Verification of the degree of protection of the enclosure
Increased safety brushless excitation synchronous motor type explosion-proof technical requirements JB/T8973-2011 4.1
2 Withstand voltage test Increased safety brushless excitation synchronous motor type explosion-proof technical requirements JB/T8973-2011 4.2
3 tempreture test Increased safety brushless excitation synchronous motor type explosion-proof technical requirements JB/T8973-2011 4.4
19
Increased safety brushless excitation synchronous motor
4 Test of Explosion-proof Function
Increased safety brushless excitation synchronous motor type explosion-proof technical requirements JB/T8973-2011 4.10
1 Check the mechanicalNo spark type three-phase asynchronous motor technology conditions Part 1: YW2 series no spark type three-phase asynchronous motor JB/T 5337.1-2015 5.2、5.3
2 insulation testNo spark type three-phase asynchronous motor technology conditions Part 1: YW2 series no spark type three-phase asynchronous motor JB/T 5337.1-2015 5.1
3 Cold dc resistance measurement
No spark type three-phase asynchronous motor technology conditions Part 1: YW2 series no spark type three-phase asynchronous motor JB/T 5337.1-2015 5.1
4 Withstand voltage testNo spark type three-phase asynchronous motor technology conditions Part 1: YW2 series no spark type three-phase asynchronous motor JB/T 5337.1-2015 5.1
5 The turn-to-turn insulation test
No spark type three-phase asynchronous motor technology conditions Part 1: YW2 series no spark type three-phase asynchronous motor JB/T 5337.1-2015 5.4
20 Non-Sparking Motor
6 clearanceand creepage distance
No spark type three-phase asynchronous motor technology conditions Part 1: YW2 series no spark type three-phase asynchronous motor JB/T 5337.1-2015 5.1
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 45 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
7 tempreture testNo spark type three-phase asynchronous motor technology conditions Part 1: YW2 series no spark type three-phase asynchronous motor JB/T 5337.1-2015 5.9
8 damp and heat testNo spark type three-phase asynchronous motor technology conditions Part 1: YW2 series no spark type three-phase asynchronous motor JB/T 5337.1-2015 5.10
under(950×950×1100)mm product
9Verification of the degree of protection of the enclosure
No spark type three-phase asynchronous motor technology conditions Part 1: YW2 series no spark type three-phase asynchronous motor JB/T 5337.1-2015 5.11
10 Test of Explosion-proof Function
No spark type three-phase asynchronous motor technology conditions Part 1: YW2 series no spark type three-phase asynchronous motor JB/T 5337.1-2015 5.12
1
General Check (The Requirements of Appearance, Assembly and Grounding)
Explosion-proof Control Push-Button JB/T570-2015 5.1
2Power-Frequency Voltage-Withstand Test
Explosion-proof Control Push-Button JB/T570-2015 5.2
3 hot and humid test Explosion-proof Control Push-Button JB/T570-2015 5.3
4 Temperature Rise Test Explosion-proof Control Push-Button JB/T570-2015 5.4
21Explosion-proof Control Push-Button
5
Test of Clamp、Seal and Mechanical Strength of Cable Gland,and The
Explosion-proof Control Push-Button JB/T570-2015 5.5
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 46 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Torsion Test of Fittings
6
Plastic thermal stability test and insulation resistance measurement
Explosion-proof Control Push-Button JB/T570-2015 5.6
7 Transparent pieces of shell shock test Explosion-proof Control Push-Button JB/T570-2015 5.8 No electric
life
8 Rubber aging test Explosion-proof Control Push-Button JB/T570-2015 5.9
9 Test of Explosion-proof Function Explosion-proof Control Push-Button JB/T570-2015 5.10
10 Heat resistance and cold resistance test Explosion-proof Control Push-Button JB/T570-2015 5.11
11 Overpressure test (static pressure test) Explosion-proof Control Push-Button JB/T570-2015 5.12
12
Determination of surface resistance of non-metallic shell parts
Explosion-proof Control Push-Button JB/T570-2015 5.13
13
Test of clamping, sealing and mechanical strength of the introduction device
Explosion-proof Control Push-Button JB/T570-2015 5.14
14Torsion test of connection terminal (insulation casing)
Explosion-proof Control Push-Button JB/T570-2015 5.15
15 Pressure test of shell and non detonating Explosion-proof Control Push-Button JB/T570-2015 5.16
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 47 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
test of internal igniting
16Thermal upheaval test of glass transparent parts
Explosion-proof Control Push-Button JB/T570-2015 5.17
1 General inspection and visual inspection Flameproof Terminal Box JB/T4258-1999 5.1
2 Test of Flameproof Parameters Flameproof Terminal Box JB/T4258-1999 5.2
3 Static strength tests Flameproof Terminal Box JB/T4258-1999 5.4
4Power-Frequency Voltage-Withstand Test
Flameproof Terminal Box JB/T4258-1999 5.3
5 Temperature Rise Test Flameproof Terminal Box JB/T4258-1999 5.6
6Degrees of Protection Provided by Enclosure
Flameproof Terminal Box JB/T4258-1999 5.5
7 hot and humid test Flameproof Terminal Box JB/T4258-1999 5.7
8 Impact Test of Shell Flameproof Terminal Box JB/T4258-1999 5.8
9 Test of Clamp、Seal of Cable Gland Flameproof Terminal Box JB/T4258-1999 5.9
10 Rubber Aging Test Flameproof Terminal Box JB/T4258-1999 5.10
22 Flameproof Terminal Box
11 Stability Test of Plastic Shell Flameproof Terminal Box JB/T4258-1999 5.11
23 Flameproof Switch 1 General Check Flameproof Switch JB/T4313-1986 5.1
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 48 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
2 Action Performance Test Flameproof Switch JB/T4313-1986 5.2
3 Temperature Rise Test Flameproof Switch JB/T4313-1986 5.3
4Power-Frequency Voltage-Withstand Test
Flameproof Switch JB/T4313-1986 5.4
5 Humidity Test Flameproof Switch JB/T4313-1986 5.5
6 Low Temperature Test Flameproof Switch JB/T4313-1986 5.11
7 Shock and Drop Test Flameproof Switch JB/T4313-1986 5.12
8 Torsion Test of Fittings Flameproof Switch JB/T4313-1986 5.13
9 Rubber Aging Test Flameproof Switch JB/T4313-1986 5.14
10
Test of Clamp、Seal and Mechanical Strength of Cable Gland
Flameproof Switch JB/T4313-1986 5.15
11 Hydrostatic Test Flameproof Switch JB/T4313-1986 5.16
12 Test of Explosion-proof Function Flameproof Switch JB/T4313-1986 5.17
1General Check and Action Performance Test
Explosion-Proof Light Switch Used in Factory JB/T6750-1993 5.1
24Explosion-Proof Light Switch Used in Factory 2
Thermal Stability Test of Plastic Shell and Shell Parts
Explosion-Proof Light Switch Used in Factory JB/T6750-1993 5.2
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 49 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
3 Clamp Test of Cable Gland Explosion-Proof Light Switch Used in Factory JB/T6750-1993 5.3
4 Torsion Test of Fittings Explosion-Proof Light Switch Used in Factory JB/T6750-1993 5.3
5 Dielectric Properties Test Explosion-Proof Light Switch Used in Factory JB/T6750-1993 5.4
6 Wet-Resitant Test Explosion-Proof Light Switch Used in Factory JB/T6750-1993 5.5
7 Temperature Rise Test Explosion-Proof Light Switch Used in Factory JB/T6750-1993 5.6
8 Test of Rated Short Circuit Current Explosion-Proof Light Switch Used in Factory JB/T6750-1993 5.9
9Degrees of Protection Provided by Enclosure
Explosion-Proof Light Switch Used in Factory JB/T6750-1993 5.10
10 Low Temperature Test Explosion-Proof Light Switch Used in Factory JB/T6750-1993 5.12
11Static Strength Test of Explosion-proof Enclosure
Explosion-Proof Light Switch Used in Factory JB/T6750-1993 5.13
12 Test of Explosion-proof Function Explosion-Proof Light Switch Used in Factory JB/T6750-1993 5.14
13 Impact Test of Shell and Shell parts Explosion-Proof Light Switch Used in Factory JB/T6750-1993 5.15
14 Rubber Aging Test Explosion-Proof Light Switch Used in Factory JB/T6750-1993 5.16
1 General inspection and visual inspection Explosion-Proof Circuit Breaker Used in Factory JB/T8677-2015 5.1
25Explosion-Proof Circuit Breaker Used in Factory 2 Parameters of the
flameproof joint Explosion-Proof Circuit Breaker Used in Factory JB/T8677-2015 5.2
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 50 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
surface of a circuit breaker shell
3
Test of Clamp、Seal and Mechanical Strength of Cable Gland
Explosion-Proof Circuit Breaker Used in Factory JB/T8677-2015 5.3
4Heat resistance and cold resistance test of nonmetallic materials
Explosion-Proof Circuit Breaker Used in Factory JB/T8677-2015 5.4
5 Torsion test of insulated casing Explosion-Proof Circuit Breaker Used in Factory JB/T8677-2015 5.5
6 Heat resistance and heat resistance Explosion-Proof Circuit Breaker Used in Factory JB/T8677-2015 5.6
7 Insulation dielectric strength verification Explosion-Proof Circuit Breaker Used in Factory JB/T8677-2015 5.7
8 Temperature rise test Explosion-Proof Circuit Breaker Used in Factory JB/T8677-2015 5.9
9 Maximum surface temperature test Explosion-Proof Circuit Breaker Used in Factory JB/T8677-2015 5.10
10 Static pressure test of flameproof shell Explosion-Proof Circuit Breaker Used in Factory JB/T8677-2015 5.17
11Degrees of Protection Provided by Enclosure
Explosion-Proof Circuit Breaker Used in Factory JB/T8677-2015 5.18
12
Pressure test of shell and non detonating test of internal igniting
Explosion-Proof Circuit Breaker Used in Factory JB/T8677-2015 5.19
13 Test of Explosion-proof Function Explosion-Proof Circuit Breaker Used in Factory JB/T8677-2015 5.20
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 51 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
14
Test on the surface insulation resistance of nonmetal parts of non metal shell and outer shell
Explosion-Proof Circuit Breaker Used in Factory JB/T8677-2015 5.21
15 Heat resistance test of circuit breaker Explosion-Proof Circuit Breaker Used in Factory JB/T8677-2015 5.22
16 Hot change test of circuit breaker Explosion-Proof Circuit Breaker Used in Factory JB/T8677-2015 5.23
17 Cold resistance test of circuit breaker Explosion-Proof Circuit Breaker Used in Factory JB/T8677-2015 5.24
18
Thermal stability test of nonmetallic and nonmetallic components
Explosion-Proof Circuit Breaker Used in Factory JB/T8677-2015 5.25
1 Test of Explosion-proof Function Explosion-Proof Operating Stack JB/T9648-2015 5.1
2Degrees of Protection Provided by Enclosure
Explosion-Proof Operating Stack JB/T9648-2015 5.2
3 Temperature Rise Test Explosion-Proof Operating Stack JB/T9648-2015 5.3
4 Transparency heat upheaval test Explosion-Proof Operating Stack JB/T9648-2015 5.4
5 Torsion test of insulated casing Explosion-Proof Operating Stack JB/T9648-2015 5.5
6 Heat resistance and cold resistance test Explosion-Proof Operating Stack JB/T9648-2015 5.6
26 Explosion-Proof Operating Stack
7 Grounding continuity test Explosion-Proof Operating Stack JB/T9648-2015 5.7
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 52 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
8Surface resistance test of non metal shell parts
Explosion-Proof Operating Stack JB/T9648-2015 5.8
9 Overvoltage test (static pressure test) Explosion-Proof Operating Stack JB/T9648-2015 5.9
10Non-Transmission Explosion of Internal Combustion Test
Explosion-Proof Operating Stack JB/T9648-2015 5.10
11 Test of cable introduction device Explosion-Proof Operating Stack JB/T9648-2015 5.11
12 Insulation dielectric strength test Explosion-Proof Operating Stack JB/T9648-2015 5.12
13 Electrical gap and creepage distance Explosion-Proof Operating Stack JB/T9648-2015 5.14
1
The Requirements of Appearance, Assembly and Grounding
Technical Conditions of Explosion-proof Fan JB 8523-1997 3.28,3.29,3.30
2 Enclosures Pressure Test Technical Conditions of Explosion-proof Fan JB 8523-1997 3.4 excludeⅠ
3Non-Transmission Explosion of Internal Combustion Test
Technical Conditions of Explosion-proof Fan JB 8523-1997 3.4 excludeⅠ
4Check Adjoining Surface of Flameproof Motor
Technical Conditions of Explosion-proof Fan JB 8523-1997 3.4
27 Explosion-proof Fan
5 Cable Gland Test Technical Conditions of Explosion-proof Fan JB 8523-1997 3.4
28 Flameproof Bolt 1 Check the Parameter of Flameproof Flameproof Bolt JB/T4312-1999 5.1
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 53 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Surface
2 Static Strength Test Flameproof Bolt JB/T4312-1999 5.2
3Power-Frequency Voltage-Withstand Test
Flameproof Bolt JB/T4312-1999 5.3
4 Temperature Rise Test Flameproof Bolt JB/T4312-1999 5.4
5 Contact Resistance Measurement Flameproof Bolt JB/T4312-1999 5.5
6 Measurement of Pull Power Flameproof Bolt JB/T4312-1999 5.6
7 Plug test Flameproof Bolt JB/T4312-1999 5.7
8 Shock Test Flameproof Bolt JB/T4312-1999 5.8
9 Drop Test Flameproof Bolt JB/T4312-1999 5.9
10 Hot and Humid Test Flameproof Bolt JB/T4312-1999 5.10
11Degrees of Protection Provided by Enclosure
Flameproof Bolt JB/T4312-1999 5.11
12 Torsion Test of Fittings Flameproof Bolt JB/T4312-1999 5.12
13
Plastic insulation resistance measurement and thermal stability test
Flameproof Bolt JB/T4312-1999 5.13
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 54 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
14 Rubber Aging Test Flameproof Bolt JB/T4312-1999 5.14
15
Test of Clamp、Seal and Mechanical Strength of Cable Gland
Flameproof Bolt JB/T4312-1999 5.15
16 Test of Explosion-proof Function Flameproof Bolt JB/T4312-1999 5.16
17Chemical gas corrosion test (only for Class Ⅱ)
Flameproof Bolt JB/T4312-1999 5.17
1 General Inspection Plant explosion-proof lighting distribution box JB/T 6749-2013 5.1
2 Clearances and creepage distances Plant explosion-proof lighting distribution box JB/T 6749-2013 5.2
3 Impact Test Plant explosion-proof lighting distribution box JB/T 6749-2013 5.3
4Shell material, surface explosion argument checking
Plant explosion-proof lighting distribution box JB/T 6749-2013 5.4
5 Action Performance Test Plant explosion-proof lighting distribution box JB/T 6749-2013 5.5
6
The impact of the introduction of the device, clamping, sealing and mechanical strength tests
Plant explosion-proof lighting distribution box JB/T 6749-2013 5.6
29Plant explosion-proof lighting distribution box
7 Insulating sleeve torsion test Plant explosion-proof lighting distribution box JB/T 6749-2013 5.7
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 55 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
8 Dielectric properties test Plant explosion-proof lighting distribution box JB/T 6749-2013 5.8
9 Damp heat test Plant explosion-proof lighting distribution box JB/T 6749-2013 5.9
10 Temperature rise test Plant explosion-proof lighting distribution box JB/T 6749-2013 5.10
11 Flameproof enclosure hydrostatic test Plant explosion-proof lighting distribution box JB/T 6749-2013 5.17
12Degrees of Protection Provided by Enclosure
Plant explosion-proof lighting distribution box JB/T 6749-2013 5.18
13
Flameproof enclosure pressure test and the non-transmission of an internal ignition test
Plant explosion-proof lighting distribution box JB/T 6749-2013 5.19
14 Transparency heat upheaval test Plant explosion-proof lighting distribution box JB/T 6749-2013 5.20
1 Mechanical inspection Explosion protected flexible conduits JB/T9600-1999 5.1
2 Hydrostatic test Explosion protected flexible conduits JB/T9600-1999 5.2
3 Bending test Explosion protected flexible conduits JB/T9600-1999 5.3
4 Electrical conduction test Explosion protected flexible conduits JB/T9600-1999 5.4
5 Test of erosion by flame Explosion protected flexible conduits JB/T9600-1999 5.5
30Explosion protected flexible conduits
6Plastic sheath flexible tube thermal stability test
Explosion protected flexible conduits JB/T9600-1999 5.6
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 56 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
7 Rubber material aging test Explosion protected flexible conduits JB/T9600-1999 5.7
8 Thermal endurance to cold Explosion protected flexible conduits JB/T9600-1999 5.9
1 Impact Test Conduit wiring accessory for explosionprotected electrical apparatu JB/T 9599-1999 5.1
2 Hydrostatic test Conduit wiring accessory for explosionprotected electrical apparatu JB/T 9599-1999 5.3
3 Sealing performance test
Conduit wiring accessory for explosionprotected electrical apparatu JB/T 9599-1999 5.4
31
Conduit wiring accessory for explosionprotected electrical apparatu
4 Degree of protection (IP) by enclosures
Conduit wiring accessory for explosionprotected electrical apparatu JB/T 9599-1999 5.5
Electrical apparatus for use in the presence of combustible dust-Part 8: Test methods-Methods for determining the minimum ignition temperatures of dust GB/T 12476.8-2010 4
1
the minimum ignition temperatures of dust layer Explosive atmospheres-Part 20-2:Material characterisitics-Combustible dusts
test methods ISO/IEC 80079-20-2-2016 8.2
Electrical apparatus for use in the presence of combustible dust-Part 8: Test methods-Methods for determining the minimum ignition temperatures of dust GB/T 12476.8-2010 5
2
the minimum ignition temperatures of dust cloud Explosive atmospheres-Part 20-2:Material characterisitics-Combustible dusts
test methods ISO/IEC 80079-20-2-2016 8.1
Electrical apparatus for use in the presence of combustible dust-Part 9:Method for determining the resistivity of dust in layers GB/T12476.9-2010 4,5,6,7
3
Method for determining the resistivity of dust in layers
Explosive atmospheres-Part 20-2:Material characterisitics-Combustible dusts test methods ISO/IEC 80079-20-2-2016 8.4
32 Dust explosion characteristics
4
method for determining minimum ignition energy of dust/air mixtures
Electrical apparatus for use in the presence of combustible dust-Part 10:Method for determining minimumignition energy of dust/air mixtures GB/T 12476.10-2010 4,5,6
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 57 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Explosive atmospheres-Part 20-2:Material characterisitics-Combustible dusts test methods ISO/IEC 80079-20-2-2016 8.3
Determination of the maximum explosion pressure Pmax and the maximum rate of explosion pressure rise (dp/dt)max ofdust clouds GB/T 16426-1996 3,4,5,6
5Determination for maximum explosion pressure Determination of explosion characteristics of dust clouds - Part
1:Determination of the maximum explosion pressure Pmax of dust clouds EN14034-1:2004+A1:2011 6,7
Determination of the maximum explosion pressure Pmax and the maximum rate of explosion pressure rise (dp/dt)max ofdust clouds GB/T 16426-1996 3,4,5,6
6
Determination for maximum rate of pressure rise of dust cloud
Determination of explosion characteristics of dust clouds - Part 2:Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds EN 14034-2:2006+A1:2011 6,7
Determination of the lower explosion limit LEL of dust clouds GB/T 16425-1996 3,4,5,6
7
Determination for minimum explosive concentration of dust cloud
Determination of explosion characteristics of dust clouds - Part 3:Determination of the lower explosion limit LEL of dust clouds EN 14034-3:2006+A1:2011 6,7
Determination of the limiting oxygen concentration LOC of coal dust clouds MT/T 837-1999 4,5,6
8
Method of determining minimum oxygen content concentration for coal dust explosion
Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds EN 14034-4:2004+A1:2011 6,7
Non-electrical equipment for potentially explosive atmospheres Part1:Basic method and requirements GB 25286.1-2010 5.2
1 hazard assessmentExplosive atmospheres – Part 36: Non-electrical equipment for explosive atmospheres – Basic method and requirements ISO 80079-36 :2016 5 33
Non-electrical equipment for potentially explosive atmospheres 2 Mechanical test Non-electrical equipment for potentially explosive atmospheres Part1:
Basic method and requirements GB 25286.1-2010 13.3.2
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 58 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Explosive atmospheres – Part 36: Non-electrical equipment for explosive atmospheres – Basic method and requirements ISO 80079-36 :2016 8.3
Non-electrical equipment for potentially explosive atmospheres Part1:Basic method and requirements GB 25286.1-2010 13.3.3
3Determination of the maximum surface temperature Explosive atmospheres – Part 36: Non-electrical equipment for explosive
atmospheres – Basic method and requirements ISO 80079-36 :2016 8.2
Non-electrical equipment for potentially explosive atmospheres Part1:Basic method and requirements GB 25286.1-2010 13.3.4
4
Tests of non-metallic parts of the equipment relevant for explosion protection
Explosive atmospheres – Part 36: Non-electrical equipment for explosive atmospheres – Basic method and requirements ISO 80079-36 :2016 8.4
Non-electrical equipment for potentially explosive atmospheres Part1:Basic method and requirements GB 25286.1-2010 13.3.5
5 Thermal shock testExplosive atmospheres – Part 36: Non-electrical equipment for explosive atmospheres – Basic method and requirements ISO 80079-36 :2016 8.4.9
Non-electrical equipment for potentially explosive atmospheres Part1:Basic method and requirements GB 25286.1-2010 附录 C
6Charging tests with non conductive materials Explosive atmospheres – Part 36: Non-electrical equipment for explosive
atmospheres – Basic method and requirements ISO 80079-36 :2016 附录 D
Test methods for the determination of the safety characteristic of dusts VDI 2263-1-1990 2.1
Standard test method forexplosibility of dust clouds ASTM E1226-2012a 11,12,13 1
Test methods for the Explosibility of Dust Clouds Explosive atmospheres-Part 20-2:Material characteristics-combustible dusts
test methods ISO/IEC 80079-20-2-2016 7
Particle size analysis-Laser diffraction methods GB/T 19077-2016 6 2 Deterrnination for
partical size analysis Particle size analysis-Laser diffraction methods ISO 13320-2009 6
34 Combustible dust
3 Deterrnination for watercontent
Chemical products for industrial use -General method for dermination of water content -The loss of mass on drying method GB/T 6284-2006 3
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 59 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Non-electrical equipment for explosive atmospheres - Part 2:Protection by flow restricting enclosure "fr" GB 25286.2-2010 5.1
1 Nature of ignition source Non-electrical equipment for use in the potentially explosive atmospheres -
Part 2:Protection by flow restricting enclosure "fr" EN 13463-2:2004 5.1
Non-electrical equipment for explosive atmospheres - Part 2:Protection by flow restricting enclosure "fr" GB 25286.2-2010 6.2.1
2
Equipment with provisions for checking of flow restricting properties
Non-electrical equipment for use in the potentially explosive atmospheres - Part 2:Protection by flow restricting enclosure "fr" EN 13463-2:2004 6.2.1
Non-electrical equipment for explosive atmospheres - Part 2:Protection by flow restricting enclosure "fr" GB 25286.2-2010 6.2.2
3
Equipment without provisions for checking of flow restricting properties
Non-electrical equipment for use in the potentially explosive atmospheres - Part 2:Protection by flow restricting enclosure "fr" EN 13463-2:2004 6.2.2
Non-electrical equipment for explosive atmospheres - Part 2:Protection by flow restricting enclosure "fr" GB 25286.2-2010 6.2.3
35
Non-electrical equipment protected by flow restricting enclosure“fr”
4
Equipment where the normal volume of the enclosure changes due to pressure
Non-electrical equipment for use in the potentially explosive atmospheres - Part 2:Protection by flow restricting enclosure "fr" EN 13463-2:2004 6.2.3
Non-electrical equipment for explosive atmospheres - Part 3:Protection by flameproof enclosure “d” GB 25286.3-2010 15.1
1
Type testing of flameproof non-electrical equipment for explosive gas or vapour/air mixtures
Non-electrical equipment for use in the potentially explosive atmospheres - Part 3:Protection by flameproof enclosure “d” EN13463-3:2005 15.1
Non-electrical equipment for explosive atmospheres - Part 3:Protection by flameproof enclosure “d” GB 25286.3-2010 15.2
2
Type testing of non-electrical electrical equipment for explosive gas or vapour/air mixtures
Non-electrical equipment for use in the potentially explosive atmospheres - Part 3:Protection by flameproof enclosure “d” EN13463-3:2005 15.1
36
Non-electrical equipment protected by flameproof enclosure "d"
3Additional requirements for flameproof entries
Non-electrical equipment for explosive atmospheres - Part 3:Protection by flameproof enclosure “d” GB 25286.3-2010 附录 C
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 60 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Non-electrical equipment for use in the potentially explosive atmospheres - Part 3:Protection by flameproof enclosure “d” EN13463-3:2005 附录 C
Non-electrical equipment for explosive atmospheres Part 5: Protection by constructional safety “c” GB 25286.5-2010 5
1 Requirements for moving parts Explosive atmospheres-Part 37:Non-electrical equipment for explosive
atmospheres-Non electrical type of protection constructional safety“c”,control of ignition source“b”,liquid immersion“k” ISO 80079-37:2016 5.6
Non-electrical equipment for explosive atmospheres Part 5: Protection by constructional safety “c” GB 25286.5-2010 6
2 Requirements for bearings Explosive atmospheres-Part 37:Non-electrical equipment for explosive
atmospheres-Non electrical type of protection constructional safety“c”,control of ignition source“b”,liquid immersion“k” ISO 80079-37:2016 5.7
Non-electrical equipment for explosive atmospheres Part 5: Protection by constructional safety “c” GB 25286.5-2010 7
3Requirements for power transmission systems
Explosive atmospheres-Part 37:Non-electrical equipment for explosive atmospheres-Non electrical type of protection constructional safety“c”,control of ignition source“b”,liquid immersion“k” ISO 80079-37:2016 5.8
Non-electrical equipment for explosive atmospheres Part 5: Protection by constructional safety “c” GB 25286.5-2010 8
4 Requirements for clutch and coupling Explosive atmospheres-Part 37:Non-electrical equipment for explosive
atmospheres-Non electrical type of protection constructional safety“c”,control of ignition source“b”,liquid immersion“k” ISO 80079-37:2016 5.9
Non-electrical equipment for explosive atmospheres Part 5: Protection by constructional safety “c” GB 25286.5-2010 9
5Requirements for brakes and braking systems
Explosive atmospheres-Part 37:Non-electrical equipment for explosive atmospheres-Non electrical type of protection constructional safety“c”,control of ignition source“b”,liquid immersion“k” ISO 80079-37:2016 5.11
37
Protection by constructional atmospheres--safety “c”
6Requirements for springs and absorbing
Non-electrical equipment for explosive atmospheres Part 5: Protection by constructional safety “c” GB 25286.5-2010 10
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 61 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
elements Explosive atmospheres-Part 37:Non-electrical equipment for explosive atmospheres-Non electrical type of protection constructional safety“c”,control of ignition source“b”,liquid immersion“k” ISO 80079-37:2016 5.12
Non-electrical equipment for explosive atmospheres Part 5: Protection by constructional safety “c” GB 25286.5-2010 11
7 Requirements for conveyor belts Explosive atmospheres-Part 37:Non-electrical equipment for explosive
atmospheres-Non electrical type of protection constructional safety“c”,control of ignition source“b”,liquid immersion“k” ISO 80079-37:2016 5.13
Non-electrical equipment for explosive atmospheres Part 5: Protection by constructional safety “c” GB 25286.5-2010 附录 B.1
8"Dry run" test for lubricated sealing arrangements
Explosive atmospheres-Part 37:Non-electrical equipment for explosive atmospheres-Non electrical type of protection constructional safety“c”,control of ignition source“b”,liquid immersion“k” ISO 80079-37:2016 附录 B.1
Non-electrical equipment for explosive atmospheres Part 5: Protection by constructional safety “c” GB 25286.5-2010 附录 B.2
9
Type test for determining the maximum engaging time of clutch assembly
Explosive atmospheres-Part 37:Non-electrical equipment for explosive atmospheres-Non electrical type of protection constructional safety“c”,control of ignition source“b”,liquid immersion“k” ISO 80079-37:2016 附录 B.2
Non-electrical equipment for explosive atmospheres - Part 6:Protection by control ofignition source “b” GB 25286.6-2010 9.1
1 Determination of control parameters Explosive atmospheres-Part 37:Non-electrical equipment for explosive
atmospheres-Non electrical type of protection constructional safety“c”,control of ignition source“b”,liquid immersion“k” ISO 80079-37:2016 8.2.1
Non-electrical equipment for explosive atmospheres - Part 6:Protection by control ofignition source “b” GB 25286.6-2010 9.2
38
Non-electrical equipment protected by control ofignition source “b” 2
Function and accuracy check of the ignition prevention system
Explosive atmospheres-Part 37:Non-electrical equipment for explosive atmospheres-Non electrical type of protection constructional safety“c”,control of ignition source“b”,liquid immersion“k” ISO 80079-37:2016 8.2.2
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 62 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Non-electrical equipment for explosive atmospheres - Part 6:Protection by liquid immersion 'k' GB 25286.8-2010 8.2
1
Increased pressure test on enclosed equipment having a sealed enclosure
Explosive atmospheres-Part 37:Non-electrical equipment for explosive atmospheres-Non electrical type of protection constructional safety“c”,control of ignition source“b”,liquid immersion“k” ISO 80079-37:2016 8.3.2
Non-electrical equipment for explosive atmospheres - Part 6:Protection by liquid immersion 'k' GB 25286.8-2010 8.3
39
Non-electrical equipment protected by liquid immersion 'k'
2
Overpressure test on enclosed equipment having a vented enclosure
Explosive atmospheres-Part 37:Non-electrical equipment for explosive atmospheres-Non electrical type of protection constructional safety“c”,control of ignition source“b”,liquid immersion“k” ISO 80079-37:2016 8.3.3
1 Appearance quality of material
Technology-Separate and explosion-proof of gasoline,gas filling station and light-fuel,LPG tank of transportation by truck AQ3001-2005 5.2.1
2 Structure size of material
Technology-Separate and explosion-proof of gasoline,gas filling station and light-fuel,LPG tank of transportation by truck AQ3001-2005 5.2.2
3 Safety inspection of cleaning operation
Technology-Separate and explosion-proof of gasoline,gas filling station and light-fuel,LPG tank of transportation by truck AQ3001-2005 5.3
4 Filling density Technology-Separate and explosion-proof of gasoline,gas filling station and light-fuel,LPG tank of transportation by truck AQ3001-2005 5.4.1
5 Blank rate Technology-Separate and explosion-proof of gasoline,gas filling station and light-fuel,LPG tank of transportation by truck AQ3001-2005 5.4.2
6 Replacement rate Technology-Separate and explosion-proof of gasoline,gas filling station and light-fuel,LPG tank of transportation by truck AQ3001-2005 5.4.2
40
Technology-Separate and explosion-proof of tank of transportation by truck and portable device
7Detection of explosion-proof performance
Technology-Separate and explosion-proof of gasoline,gas filling station and light-fuel,LPG tank of transportation by truck AQ3001-2005 5.5
Lighting electric equipment
1Explosion-proof luminaires and luminaires
1Appearance, dimensional inspection
Edison screw lampholders specially used for explosion-proof liminaires GB/T 1444-2008 5.1
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 63 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
2 Damp heat test Edison screw lampholders specially used for explosion-proof liminaires GB/T 1444-2008 5.2
3 Impact Test Edison screw lampholders specially used for explosion-proof liminaires GB/T 1444-2008 5.3
4 Operation test Edison screw lampholders specially used for explosion-proof liminaires GB/T 1444-2008 5.4
5 Temperature rise test Edison screw lampholders specially used for explosion-proof liminaires GB/T 1444-2008 5.5
6 Thermal endurance to heat
Edison screw lampholders specially used for explosion-proof liminaires GB/T 1444-2008 5.6
7 Anti-season cracking test
Edison screw lampholders specially used for explosion-proof liminaires GB/T 1444-2008 5.7
8 Flame resistance test Edison screw lampholders specially used for explosion-proof liminaires GB/T 1444-2008 5.9
9 Comparative tracking index determination
Edison screw lampholders specially used for explosion-proof liminaires GB/T 1444-2008 5.1
10 Thermal stability test Edison screw lampholders specially used for explosion-proof liminaires GB/T 1444-2008 5.11
11 Structure explosive environment with explosion-proof lighting QB/T 4737-2014 4.2
12 Lamps with battery explosive environment with explosion-proof lighting QB/T 4737-2014 4.3
13 Temperature explosive environment with explosion-proof lighting QB/T 4737-2014 4.4
14 Equipment enclosure opening time explosive environment with explosion-proof lighting QB/T 4737-2014 4.5
15Metal, shell metal parts and glass enclosure
explosive environment with explosion-proof lighting QB/T 4737-2014 4.6
16 Non-metallic enclosures or non- explosive environment with explosion-proof lighting QB/T 4737-2014 4.7
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 64 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
metallic parts, transparent parts
17 Structure Explosive environment with increased safety lighting QB/T4738-2014 4.2
18 Temperature Explosive environment with increased safety lighting QB/T4738-2014 4.3
19 Lamp housing opening time Explosive environment with increased safety lighting QB/T4738-2014 4.4
20
Non-metallic enclosures and non-metallic parts of the housing
Explosive environment with increased safety lighting QB/T4738-2014 4.5
21Metal, glass and metal parts and pieces of shell casing
Explosive environment with increased safety lighting QB/T4738-2014 4.6
22 Lamps with battery Explosive environment with increased safety lighting QB/T4738-2014 4.7
23 Lamps and lamp Explosive environment with increased safety lighting QB/T4738-2014 4.8
24 Bi-pin fluorescent tube Explosive environment with increased safety lighting QB/T4738-2014 4.9
25 Cap lights and portable lights Explosive environment with increased safety lighting QB/T4738-2014 4.1
26 General Inspection Marine proof lamp technology GB/T 12045-2003 5.1
27 Structural testing Marine proof lamp technology GB/T 12045-2003 5.2
28 High and low temperature Marine proof lamp technology GB/T 12045-2003 5.3
29 Hot and humid Marine proof lamp technology GB/T 12045-2003 5.4
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 65 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
30 Vibration Marine proof lamp technology GB/T 12045-2003 5.6
31 Attack Marine proof lamp technology GB/T 12045-2003 5.7
32 Fall Marine proof lamp technology GB/T 12045-2003 5.8
33 Salt Marine proof lamp technology GB/T 12045-2003 5.9
34 Power Changes Marine proof lamp technology GB/T 12045-2003 5.11
35 Insulation resistance Marine proof lamp technology GB/T 12045-2003 5.12
36 Dielectric strength Marine proof lamp technology GB/T 12045-2003 5.13
37 Clearances and creepage distances Marine proof lamp technology GB/T 12045-2003 5.14
38Bulb spacing and the transparent cover and protection net
Marine proof lamp technology GB/T 12045-2003 5.16
39Cable and Wire introducing structural test device
Marine proof lamp technology GB/T 12045-2003 5.17
40 Surface temperature Marine proof lamp technology GB/T 12045-2003 5.18
41 Rectifier test Marine proof lamp technology GB/T 12045-2003 5.19
42 Spiral lampholders Mechanical tests Marine proof lamp technology GB/T 12045-2003 5.2
43 Shell strength Marine proof lamp technology GB/T 12045-2003 2.21
44 Housing Material Marine proof lamp technology GB/T 12045-2003 5.22
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 66 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
45Elastic material hardness and aging tests
Marine proof lamp technology GB/T 12045-2003 5.23
46 Hot upheaval Marine proof lamp technology GB/T 12045-2003 5.24
47 Degree of protection (IP) by enclosures Marine proof lamp technology GB/T 12045-2003 5.26
48 Test of marking Luminaires - Part 1:General requirements and tests GB 7000.1-2015 3.4
49 Replaceable components Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.2
50 Wireways Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.3
51 lampholders mount Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.4.1
52 Lamp holder torsion test Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.4.4
53 Impulse voltage measurement Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.4.5
54 Lamp holder attachment check Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.4.6
55 Lamp connectors Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.4.8
56 Starterholders Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.5
57 Terminal blocks Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.6
58 Terminals and supply connections Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.7
59 Switches Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.8
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 67 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
60 Insulating linings and sleeves Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.9
61 Double and reinforced insulation Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.10
62Electrical connections and current-carrying parts
Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.11
63 Torque tests on Screwed glands Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.12.5
64Torque tests on Screws and connectors
Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.12.1
65 Mechanical strength Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.13
66 The cable tension test Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.14.2
67 Torque tests on rigid suspension Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.14
68 Flammable materials Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.15
69
The distance between lamp control gear from the mounting surface
Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.16.1
70 Ignitors Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.19
71 Attachments to lamps Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.22
72 Photobiological hazards Luminaires - Part 1:General requirements and tests GB 7000.1-2015 4.24
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 68 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
73Supply connection and other external wiring
Luminaires - Part 1:General requirements and tests GB 7000.1-2015 5.2
74 Earthing resistance measurement Luminaires - Part 1:General requirements and tests GB 7000.1-2015 7.2.3
75 Earthing terminals check Luminaires - Part 1:General requirements and tests GB 7000.1-2015 7.1
76 Earthing continuity check Luminaires - Part 1:General requirements and tests GB 7000.1-2015 7.2
77
Prevent to get an electric shock the insertion of voltage measurements
Luminaires - Part 1:General requirements and tests GB 7000.1-2015 8.2.1
78 Live parts of voltage measurement Luminaires - Part 1:General requirements and tests GB 7000.1-2015 8.2.7
79
Protection against electric shock of the measurement of voltage between the pins of plug
Luminaires - Part 1:General requirements and tests GB 7000.1-2015 8.2.7
80Tests for ingress of dust, solid objects and moisture
Luminaires - Part 1:General requirements and tests GB 7000.1-2015 9.2
81 Humidity test Luminaires - Part 1:General requirements and tests GB 7000.1-2015 9.3
82 Insulation resistance test Luminaires - Part 1:General requirements and tests GB 7000.1-2015 10.2.1
83 Electric strength test Luminaires - Part 1:General requirements and tests GB 7000.1-2015 10.2.2
84 Leakage current test Luminaires - Part 1:General requirements and tests GB 7000.1-2015 10.3
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 69 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
85 Creepage distances and clearances Luminaires - Part 1:General requirements and tests GB 7000.1-2015 11.2
86 endurance test and thermal test Luminaires - Part 1:General requirements and tests GB 7000.1-2015 12.3
87 Thermal test (normal operation) Luminaires - Part 1:General requirements and tests GB 7000.1-2015 12.4
88 Thermal test (abnormal operation) Luminaires - Part 1:General requirements and tests GB 7000.1-2015 12.5
89Thermal test (failed windings in lamp control gear)
Luminaires - Part 1:General requirements and tests GB 7000.1-2015 12.6
90Test for luminaires without thermal cut-outs
Luminaires - Part 1:General requirements and tests GB 7000.1-2015 12.7.1
91Test for luminaires with temperature sensing controls
Luminaires - Part 1:General requirements and tests GB 7000.1-2015 12.7.2
92 Resistance to heat Luminaires - Part 1:General requirements and tests GB 7000.1-2015 13.2
93 Screw terminals Luminaires - Part 1:General requirements and tests GB 7000.1-2015 14
94 Resistance to heat Luminaires - Part 1:General requirements and tests GB 7000.1-2015 13.2
95 Resistance to flame and ignition Luminaires - Part 1:General requirements and tests GB 7000.1-2015 13.3
96 Resistance to tracking Luminaires - Part 1:General requirements and tests GB 7000.1-2015 13.4
97 Mechanical tests for terminals Luminaires - Part 1:General requirements and tests GB 7000.1-2015 14.4
98 screwless terminals Luminaires - Part 1:General requirements and tests GB 7000.1-2015 15
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 70 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
99Mechanical tests for non-permanent connections
Luminaires - Part 1:General requirements and tests GB 7000.1-2015 15.5
100 Contact resistance test for internal wiring Luminaires - Part 1:General requirements and tests GB 7000.1-2015 15.6.1
101Mechanical tests for permanent connections
Luminaires - Part 1:General requirements and tests GB 7000.1-2015 15.5
102
Heating tests for Terminals and connections for external wiring
Luminaires - Part 1:General requirements and tests GB 7000.1-2015 15.6.2
103
Contact resistance test for Terminals and connections for external wiring
Luminaires - Part 1:General requirements and tests GB 7000.1-2015 15.9.1
104
Mechanical tests for terminal and connections for internal wiring
Luminaires - Part 1:General requirements and tests GB 7000.1-2015 15.5
105
Heating tests for Terminals and connections for internal wiring
Luminaires - Part 1:General requirements and tests GB 7000.1-2015 15.6.2
106 Test of marking Luminaires. Part 2-22:Particular requirements-Luminaires for emergency lighting GB 7000.2-2008 5
107 Structure inspection Luminaires. Part 2-22:Particular requirements-Luminaires for emergency lighting GB 7000.2-2008 6
108 Creepage distances and clearances
Luminaires. Part 2-22:Particular requirements-Luminaires for emergency lighting GB 7000.2-2008 7
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 71 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
109 Provision for earthing Luminaires. Part 2-22:Particular requirements-Luminaires for emergency lighting GB 7000.2-2008 8
110 Terminal and connections
Luminaires. Part 2-22:Particular requirements-Luminaires for emergency lighting GB 7000.2-2008 9
111 External and internal wiring
Luminaires. Part 2-22:Particular requirements-Luminaires for emergency lighting GB 7000.2-2008 10
112 Protection against electric shock
Luminaires. Part 2-22:Particular requirements-Luminaires for emergency lighting GB 7000.2-2008 11
113 Endurance test and Thermal test
Luminaires. Part 2-22:Particular requirements-Luminaires for emergency lighting GB 7000.2-2008 12
114Tests for ingress of dust, solid objects and moisture
Luminaires. Part 2-22:Particular requirements-Luminaires for emergency lighting GB 7000.2-2008 13
115 Insulation resistance and electric strength
Luminaires. Part 2-22:Particular requirements-Luminaires for emergency lighting GB 7000.2-2008 14
116 Resistance to heat,fire and tracking
Luminaires. Part 2-22:Particular requirements-Luminaires for emergency lighting GB 7000.2-2008 15
117 Safety features Luminaires. Part 2-22:Particular requirements-Luminaires for emergency lighting GB 7000.2-2008 16
118 Conversion operations Luminaires. Part 2-22:Particular requirements-Luminaires for emergency lighting GB 7000.2-2008 17
119 High-temperature operation
Luminaires. Part 2-22:Particular requirements-Luminaires for emergency lighting GB 7000.2-2008 18
120Battery chargers for self-contained emergency luminaires
Luminaires. Part 2-22:Particular requirements-Luminaires for emergency lighting GB 7000.2-2008 19
121 Test devices for emergency operation
Luminaires. Part 2-22:Particular requirements-Luminaires for emergency lighting GB 7000.2-2008 20
122 Test of marking Luminaires. Part 2-6:Particular requirements-Luminaires with built-in transformers or convertors for filament lamps GB 7000.6-2008 5
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 72 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
123 Structure inspection Luminaires. Part 2-6:Particular requirements-Luminaires with built-in transformers or convertors for filament lamps GB 7000.6-2008 6
124 Creepage distances and clearances
Luminaires. Part 2-6:Particular requirements-Luminaires with built-in transformers or convertors for filament lamps GB 7000.6-2008 7
125 Provision for earthing Luminaires. Part 2-6:Particular requirements-Luminaires with built-in transformers or convertors for filament lamps GB 7000.6-2008 8
126 Terminal and connections
Luminaires. Part 2-6:Particular requirements-Luminaires with built-in transformers or convertors for filament lamps GB 7000.6-2008 9
127 External and internal wiring
Luminaires. Part 2-6:Particular requirements-Luminaires with built-in transformers or convertors for filament lamps GB 7000.6-2008 10
128 Protection against electric shock
Luminaires. Part 2-6:Particular requirements-Luminaires with built-in transformers or convertors for filament lamps GB 7000.6-2008 11
129 Endurance test and Thermal test
Luminaires. Part 2-6:Particular requirements-Luminaires with built-in transformers or convertors for filament lamps GB 7000.6-2008 12
130Tests for ingress of dust, solid objects and moisture
Luminaires. Part 2-6:Particular requirements-Luminaires with built-in transformers or convertors for filament lamps GB 7000.6-2008 13
131 Insulation resistance and electric strength
Luminaires. Part 2-6:Particular requirements-Luminaires with built-in transformers or convertors for filament lamps GB 7000.6-2008 14
132 Resistance to heat,fire and tracking
Luminaires. Part 2-6:Particular requirements-Luminaires with built-in transformers or convertors for filament lamps GB 7000.6-2008 15
133 Test of marking Safe requirements for floodlights GB 7000.7-2005 5
134 Structure inspection Safe requirements for floodlights GB 7000.7-2005 6
135 Creepage distances and clearances Safe requirements for floodlights GB 7000.7-2005 7
136 Provision for earthing Safe requirements for floodlights GB 7000.7-2005 8
137 Terminal and connections Safe requirements for floodlights GB 7000.7-2005 9
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 73 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
138 External and internal wiring Safe requirements for floodlights GB 7000.7-2005 10
139 Protection against electric shock Safe requirements for floodlights GB 7000.7-2005 11
140 Endurance test and Thermal test Safe requirements for floodlights GB 7000.7-2005 12
141Tests for ingress of dust, solid objects and moisture
Safe requirements for floodlights GB 7000.7-2005 13
142 Insulation resistance and electric strength Safe requirements for floodlights GB 7000.7-2005 14
143 Resistance to heat,fire and tracking Safe requirements for floodlights GB 7000.7-2005 15
144 Test of marking Luminaires. Part 2-3: Particular requirements-Luminaires for road and street lighting GB 7000.203-2013 5
145 Structure inspection Luminaires. Part 2-3: Particular requirements-Luminaires for road and street lighting GB 7000.203-2013 6
146 Creepage distances and clearances
Luminaires. Part 2-3: Particular requirements-Luminaires for road and street lighting GB 7000.203-2013 7
147 Provision for earthing Luminaires. Part 2-3: Particular requirements-Luminaires for road and street lighting GB 7000.203-2013 8
148 Terminal and connections
Luminaires. Part 2-3: Particular requirements-Luminaires for road and street lighting GB 7000.203-2013 9
149 External and internal wiring
Luminaires. Part 2-3: Particular requirements-Luminaires for road and street lighting GB 7000.203-2013 10
150 Protection against electric shock
Luminaires. Part 2-3: Particular requirements-Luminaires for road and street lighting GB 7000.203-2013 11
151 Endurance test and Thermal test
Luminaires. Part 2-3: Particular requirements-Luminaires for road and street lighting GB 7000.203-2013 12
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 74 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
152Tests for ingress of dust, solid objects and moisture
Luminaires. Part 2-3: Particular requirements-Luminaires for road and street lighting GB 7000.203-2013 13
153 Insulation resistance and electric strength
Luminaires. Part 2-3: Particular requirements-Luminaires for road and street lighting GB 7000.203-2013 14
154 Resistance to heat,fire and tracking
Luminaires. Part 2-3: Particular requirements-Luminaires for road and street lighting GB 7000.203-2013 15
155 Test of marking Luminaires. Part 2-4:Particular requirements-Portalbe general purpose luminaires GB7000.204-2008 5
156 Structure inspection Luminaires. Part 2-4:Particular requirements-Portalbe general purpose luminaires GB7000.204-2008 6
157 Creepage distances and clearances
Luminaires. Part 2-4:Particular requirements-Portalbe general purpose luminaires GB7000.204-2008 7
158 Provision for earthing Luminaires. Part 2-4:Particular requirements-Portalbe general purpose luminaires GB7000.204-2008 8
159 Terminal and connections
Luminaires. Part 2-4:Particular requirements-Portalbe general purpose luminaires GB7000.204-2008 9
160 External and internal wiring
Luminaires. Part 2-4:Particular requirements-Portalbe general purpose luminaires GB7000.204-2008 10
161 Protection against electric shock
Luminaires. Part 2-4:Particular requirements-Portalbe general purpose luminaires GB7000.204-2008 11
162 Endurance test and Thermal test
Luminaires. Part 2-4:Particular requirements-Portalbe general purpose luminaires GB7000.204-2008 12
163Tests for ingress of dust, solid objects and moisture
Luminaires. Part 2-4:Particular requirements-Portalbe general purpose luminaires GB7000.204-2008 13
164 Insulation resistance and electric strength
Luminaires. Part 2-4:Particular requirements-Portalbe general purpose luminaires GB7000.204-2008 14
165 Resistance to heat,fire and tracking
Luminaires. Part 2-4:Particular requirements-Portalbe general purpose luminaires GB7000.204-2008 15
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 75 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
166 Test of marking Luminaires. Part 2-8:Particular requirements-Handlamps GB 7000.208-2008 5
167 Structure inspection Luminaires. Part 2-8:Particular requirements-Handlamps GB 7000.208-2008 6
168 Creepage distances and clearances
Luminaires. Part 2-8:Particular requirements-Handlamps GB 7000.208-2008 7
169 Provision for earthing Luminaires. Part 2-8:Particular requirements-Handlamps GB 7000.208-2008 8
170 Terminal and connections
Luminaires. Part 2-8:Particular requirements-Handlamps GB 7000.208-2008 9
171 External and internal wiring
Luminaires. Part 2-8:Particular requirements-Handlamps GB 7000.208-2008 10
172 Protection against electric shock
Luminaires. Part 2-8:Particular requirements-Handlamps GB 7000.208-2008 11
173 Endurance test and Thermal test
Luminaires. Part 2-8:Particular requirements-Handlamps GB 7000.208-2008 12
174Tests for ingress of dust, solid objects and moisture
Luminaires. Part 2-8:Particular requirements-Handlamps GB 7000.208-2008 13
175 Insulation resistance and electric strength
Luminaires. Part 2-8:Particular requirements-Handlamps GB 7000.208-2008 14
176 Resistance to heat,fire and tracking
Luminaires. Part 2-8:Particular requirements-Handlamps GB 7000.208-2008 15
177 Test of marking Safety requirements for luminaries with limited surface temperatures GB 7000.17-2003 5
178 Structure inspection Safety requirements for luminaries with limited surface temperatures GB 7000.17-2003 6
179 Creepage distances and clearances
Safety requirements for luminaries with limited surface temperatures GB 7000.17-2003 7
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 76 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
180 Provision for earthing Safety requirements for luminaries with limited surface temperatures GB 7000.17-2003 8
181 Terminal and connections
Safety requirements for luminaries with limited surface temperatures GB 7000.17-2003 9
182 External and internal wiring
Safety requirements for luminaries with limited surface temperatures GB 7000.17-2003 10
183 Protection against electric shock
Safety requirements for luminaries with limited surface temperatures GB 7000.17-2003 11
184 Endurance test and Thermal test
Safety requirements for luminaries with limited surface temperatures GB 7000.17-2003 12
185 Normal operating temperature limit
Safety requirements for luminaries with limited surface temperatures GB 7000.17-2003 12.1
186 Abnormal operating temperature limit
Safety requirements for luminaries with limited surface temperatures GB 7000.17-2003 12.2
187 Temperature limit failure conditions
Safety requirements for luminaries with limited surface temperatures GB 7000.17-2003 12.3
188Tests for ingress of dust, solid objects and moisture
Safety requirements for luminaries with limited surface temperatures GB 7000.17-2003 13
189 Insulation resistance and electric strength
Safety requirements for luminaries with limited surface temperatures GB 7000.17-2003 14
190 Resistance to heat,fire and tracking
Safety requirements for luminaries with limited surface temperatures GB 7000.17-2003 15
191 Requirement of day lighting
Hygienic standard for day lighting and artificial lighting for middle and elementary school GB 7793-2010 4
192 Requirement of artificial lighting
Hygienic standard for day lighting and artificial lighting for middle and elementary school GB 7793-2010 5
193 Auxiliary measuring General requirements for the photometry and goniophotometry of lumilaries GB/T 9468-2008 5.1.3.2
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 77 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
194The light intensity distribution measurement
General requirements for the photometry and goniophotometry of lumilaries GB/T 9468-2008 5.2
195 Lamps and lanterns of luminous flux test
General requirements for the photometry and goniophotometry of lumilaries GB/T 9468-2008 5.3
196 Light output ratio of a luminaire;LOR
General requirements for the photometry and goniophotometry of lumilaries GB/T 9468-2008 5.4
197 Luminance test of a luminaire
General requirements for the photometry and goniophotometry of lumilaries GB/T 9468-2008 5.5
198 Illumination measurement
General requirements for the photometry and goniophotometry of lumilaries GB/T 9468-2008 5.6
199photometric measurement of a luminaire
Photometry and goniophotometry of luminaires GB/T 22907-2008 6.1.3
200The light intensity distribution measurement
Photometry and goniophotometry of luminaires GB/T 22907-2008 6.2
201 Lamps and lanterns of luminous flux test Photometry and goniophotometry of luminaires GB/T 22907-2008 6.3
202Light output ratio working of a luminaire;LORW
Photometry and goniophotometry of luminaires GB/T 22907-2008 6.4
203 Luminance measurement Photometry and goniophotometry of luminaires GB/T 22907-2008 6.5
204 Illumination measurement Photometry and goniophotometry of luminaires GB/T 22907-2008 6.6
205Measurement of lamps and lamp systems
Photobiological safety of lamps and lamp systems GB/T 20145-2006 5
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 78 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
206
Method for Total LuminousFlux Measurement of LampsUsing an Integrating Sphere Photometer
IESNA Approved Method for Total LuminousFlux Measurement of LampsUsing an Integrating Sphere Photometer IESNA LM-78-2007 3,4,5
207
the Electrical and Photometric Measurements of Solid-State Lighting Products
IES Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products IESNA LM-79-08 3,4,5,6,7,8,9,10,11,12
208 Colorimetry test Colorimetry CIE 15:2004 3,4,5,6,7,8,9
209Methods of measuring the color of light sources
Methods of measuring the color of light sources GB/T 5702-2003 3,4
210Method of measuring the color of light sources
Method of measuring the color of light sources GB/T 7922-2008 4,5
211
The general requirements of lamps and lanterns and checked to be tested
Photometry for floodlight GB/T 7002-2008 5.1
212 Photometry method Photometry for floodlight GB/T 7002-2008 5.2
1 Marking Luminaires. Part 2:Particular requirements. Section 1:Fixed general purpose luminaires GB7000.201-2008 5
2 Structure inspection Luminaires. Part 2:Particular requirements. Section 1:Fixed general purpose luminaires GB7000.201-2008 6 2
Fixed general purpose luminaires
3 Creepage distances and clearances
Luminaires. Part 2:Particular requirements. Section 1:Fixed general purpose luminaires GB7000.201-2008 7
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 79 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
4 Provision for earthing Luminaires. Part 2:Particular requirements. Section 1:Fixed general purpose luminaires GB7000.201-2008 8
5 Terminal and connections
Luminaires. Part 2:Particular requirements. Section 1:Fixed general purpose luminaires GB7000.201-2008 9
6 External and internal wiring
Luminaires. Part 2:Particular requirements. Section 1:Fixed general purpose luminaires GB7000.201-2008 10
7 Protection against electric shock
Luminaires. Part 2:Particular requirements. Section 1:Fixed general purpose luminaires GB7000.201-2008 11
8 Endurance test and Thermal test
Luminaires. Part 2:Particular requirements. Section 1:Fixed general purpose luminaires GB7000.201-2008 12
9Tests for ingress of dust, solid objects and moisture
Luminaires. Part 2:Particular requirements. Section 1:Fixed general purpose luminaires GB7000.201-2008 13
10 Insulation resistance and electric strength
Luminaires. Part 2:Particular requirements. Section 1:Fixed general purpose luminaires GB7000.201-2008 14
11 Resistance to heat,fire and tracking
Luminaires. Part 2:Particular requirements. Section 1:Fixed general purpose luminaires GB7000.201-2008 15
1 Marking Luminaires - Part 2-2: Particular requirements - Recessed luminaires GB7000.202-2008 5
2 Structure inspection Luminaires - Part 2-2: Particular requirements - Recessed luminaires GB7000.202-2008 6
3 Creepage distances and clearances
Luminaires - Part 2-2: Particular requirements - Recessed luminaires GB7000.202-2008 7
4 Provision for earthing Luminaires - Part 2-2: Particular requirements - Recessed luminaires GB7000.202-2008 8
5 Terminal and connections
Luminaires - Part 2-2: Particular requirements - Recessed luminaires GB7000.202-2008 9
3 Recessed luminaires
6 External and internal wiring
Luminaires - Part 2-2: Particular requirements - Recessed luminaires GB7000.202-2008 10
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 80 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
7 Protection against electric shock
Luminaires - Part 2-2: Particular requirements - Recessed luminaires GB7000.202-2008 11
8 Endurance test and Thermal test
Luminaires - Part 2-2: Particular requirements - Recessed luminaires GB7000.202-2008 12
9Tests for ingress of dust, solid objects and moisture
Luminaires - Part 2-2: Particular requirements - Recessed luminaires GB7000.202-2008 13
10 Insulation resistance and electric strength
Luminaires - Part 2-2: Particular requirements - Recessed luminaires GB7000.202-2008 14
11 Resistance to heat,fire and tracking
Luminaires - Part 2-2: Particular requirements - Recessed luminaires GB7000.202-2008 15
1 General requirements Urban rail transit lighting GB/T16275-2008 4
2 Illuminance standard value Urban rail transit lighting GB/T16275-2008 5
3Emergency lighting、on-duty lighting and transition lighting
Urban rail transit lighting GB/T16275-2008 6
4 Lighting quality Urban rail transit lighting GB/T16275-2008 7
5 Lighting energy saving Urban rail transit lighting GB/T16275-2008 8
4 Urban rail transit lighting
6 Operation maintance and measurement Urban rail transit lighting GB/T16275-2008 9
1 Basic requirements Standard for lighting design of buildings GB 50034-2013 3
2 Lighting quantity and quality Standard for lighting design of buildings GB 50034-2013 4 5 Lighting of
buildings
3 Illuminance standard value Standard for lighting design of buildings GB 50034-2013 5
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 81 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
4 Lighting energy conservation Standard for lighting design of buildings GB 50034-2013 6
5Lighting power distribution and control
Standard for lighting design of buildings GB 50034-2013 7
Photobiological safety of lamps and lamp systems IEC 62471:2006 5 1
Measurement of lamps and lamp systems Photobiological safety of lamps and lamp systems EN 62471:2008 5
2Spectrum, colour temperature, and blue light hazard
Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires IEC/TR 62778-2014 5
3LED packages, LED modules, lamps and luminaires
Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires IEC/TR 62778-2014 6
4 Measurement information flow
Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires IEC/TR 62778-2014 7
6
Photobiological safety of lamps and lamp systems
5 Risk group classification
Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires IEC/TR 62778-2014 8
General environmental test for electrical products
Environmental TestingPart 2-1: Tests-Test A:Cold GB/T 2423.1-2008 4,5,6
1 Low temperature testEnvironmental TestingPart 2-1: Tests-Test A:Cold IEC 60068-2-1: 2007 4,5,6
Environmental testing for electric and electronic productsPart2: Test methods一 Tests B: Dry heat GB/T 2423.2--2008 4,5,6
2 Hot test Environmental testing for electric and electronic productsPart3: Test methods一 Tests B: Dry heat IEC 60068-2-2: 2007 4,5,6
1
Electrical and electronic products environmental testing methods
3 Standard Test Method Environmental testing Part 2-78:Tests 一 Test Cab:Damp heat ,steady state
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 82 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
GB/T 2423.3-2016 4,5,6,7,8,9,10for Alternating hot and humid
Environmental testing Part 2-78:Tests 一 Test Cab:Damp heat ,steady state lEC 60068-2-78: 2012 4,5,6,7,8,9,10
Environmental testingPart 2-30: Tests Test Db: Damp heat, cyclic(12 h+ 12 h cycle) GB/T 2423.4-2008 4,5,6,7,8,9,10
4Standard Test Method for Alternating hot and humid Environmental testingPart 2-30: Tests Test Db: Damp heat, cyclic(12 h+ 13 h
cycle) IEC 60068-2-30: 2005 4,5,6,7,8,9,10
Basic environmental testing procedures 一 Part 2: tests-Test Ka: Salt mist GB/T 2423.17-2008 3,4,5,6,7,8
5 Salt spray testBasic environmental testing procedures 一 Part 3: tests-Test Ka: Salt mist IEC 60068-2-11: 1981 3,4,5,6,7,8
Environmental testing-Part 2-42: Tests 一 TestKc: Sulphur dioxide test for contacts and connections GB/T 2423.19-2013 3,4,5,6
6 Sulfur dioxide testEnvironmental testing-Part 2-43: Tests 一 TestKc: Sulphur dioxide test for contacts and connections IEC 60068-2-42: 2003 3,4,5,6
Degrees of Protection Provided by Enclosure (IP code) GB/T 4208-2017 4,5,6,7,8,9,10,11,12,13,14
Degrees of Protection Provided by Enclosure (IP code) IEC 60529:1989+AMD1:1999+AMD2:2013 4,5,6,7,8,9,10,11,12,13,14
Rotating electrical machines 一 Part 5: Degrees of protection provided by the integral design ofrotating electrical machines (IP code) - Classification GB/T 4942.1-2006 7,8,9,10
7 Protection class test
Rotating electrical machines 一 Part 6: Degrees of protection provided by the integral design ofrotating electrical machines (IP code) - Classification IEC 60034-5-2000+Amd 1-2006 7,8,9,10
Environmental testingPnrt2. Tests- Test L : Dust and sand GB/T 2423.37-2006 4,5,6
8 Dust ExperimentEnvironmental testingPnrt3. Tests- Test L : Dust and sand IEC 60068-2-68:
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 83 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
1994 4,5,6
Special equipment and related equipment
Lift
1
The selection of lift for explosive atmosphere-es and its explosion-proof electrical and non electrical components
Safety rules for the construction and installation of lifts for explosive atmospheres(GB 31094-2014) GB/T 31094-2014 5.2.2
2Explosion-proof requirements for electrical equipment
Safety rules for the construction and installation of lifts for explosive atmospheres(GB 31094-2014) GB/T 31094-2014 5.3
3Explosion-proof requirements for non electrical equipment
Safety rules for the construction and installation of lifts for explosive atmospheres(GB 31094-2014) GB/T 31094-2014 5.4
4 Installation Safety rules for the construction and installation of lifts for explosive atmospheres(GB 31094-2014) GB/T 31094-2014 5.5
5
Ignition hazard assessment for electrical and non electrical components
Safety rules for the construction and installation of lifts for explosive atmospheres(GB 31094-2014) GB/T 31094-2014 附录 A
1Lift for Explosive Atmosphere-es
6Temperature test of lift for explosive atmosphere-es
Safety rules for the construction and installation of lifts for explosive atmospheres(GB 31094-2014) GB/T 31094-2014 5.2.2.8
Crane
1 Explosion-proof Cranes 1 Electrical explosion-
proof requirements Explosion-proof hoists(JB/T 10222-2011) JB/T 10222-2011 6.4
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 84 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
2Mechanical explosion-proof requirements
Explosion-proof hoists(JB/T 10222-2011) JB/T 10222-2011 6.5
3 Electrical explosion-proof requirements
Explosion-proof cranes with electric hoist(JB/T 10219-2011) JB/T 10219-2011 6.4
4Mechanical explosion-proof requirements
Explosion-proof cranes with electric hoist(JB/T 10219-2011) JB/T 10219-2011 6.5
5Explosion-proof performance requirements
Explosion-proof overhead traveling cranes(JB/T 5897-2014) JB/T 5897-2014 6
Vehicles
General rules of explosion-proof techniques of industrial trucks for explosive atmospheres GB/T 19854-2018 5.2
1 Temperature measurement Industrial Trucks —Safety requirements andverification —
Supplementaryrequirements for operationin potentially explosiveatmospheres EN 1755:2015 5.1
General rules of explosion-proof techniques of industrial trucks for explosive atmospheres GB/T 19854-2018 5.3
2 Insulation resistance measurement Industrial Trucks —Safety requirements andverification —
Supplementaryrequirements for operationin potentially explosiveatmospheres EN 1755:2015 5.2
3 Impact test of battery power supply unit
General rules of explosion-proof techniques of industrial trucks for explosive atmospheres GB/T 19854-2018 附录 D.4.1
1 explosion-proof industrial truck
4
Hydrogen concentration test of battery power supply unit
General rules of explosion-proof techniques of industrial trucks for explosive atmospheres GB/T 19854-2018 附录 D.4.2
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 85 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
5
Measurement of insulation resistance of power supply device
General rules of explosion-proof techniques of industrial trucks for explosive atmospheres GB/T 19854-2018 附录 D.4.3
6 Determination of connection resistance
General rules of explosion-proof techniques of industrial trucks for explosive atmospheres GB/T 19854-2018 附录 D.4.4
7 Airtightness test General rules of explosion-proof techniques of industrial trucks for explosive atmospheres GB/T 19854-2018 附录 D.4.5
8 Leakage test General rules of explosion-proof techniques of industrial trucks for explosive atmospheres GB/T 19854-2018 附录 D.4.6
9Measurement of insulation resistance of battery box
General rules of explosion-proof techniques of industrial trucks for explosive atmospheres GB/T 19854-2018 附录 D.4.7
10Determination of cast resistance of connecting wire
General rules of explosion-proof techniques of industrial trucks for explosive atmospheres GB/T 19854-2018 附录 D.4.8
11Air permeability test of special exhaust plug
General rules of explosion-proof techniques of industrial trucks for explosive atmospheres GB/T 19854-2018 附录 D.4.9
12 Flameproof test of special exhaust plug
General rules of explosion-proof techniques of industrial trucks for explosive atmospheres GB/T 19854-2018 附录 D.4.10
Explosive-proof industrial trucks—Part 1:Battery-operated industrial trucks GB/T 26950.1-2011 5.3.1
13 Temperature measurement Explosive-proof industrial trucks—Part 2:internal combustion engines
industrial trucks GB/T 26950.2-2015 5.3.1
Explosive-proof industrial trucks—Part 1:Battery-operated industrial trucks GB/T 26950.1-2011 5.3.2
14Insulation resistance measurement of industrial trucks Explosive-proof industrial trucks—Part 2:internal combustion engines
industrial trucks GB/T 26950.2-2015 5.3.2
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 86 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
15 Plastic Insulation test Explosive-proof industrial trucks—Part 2:internal combustion engines industrial trucks GB/T 26950.2-2015 5.3.3
16Internal combustion engines safety performance test
Explosive-proof industrial trucks—Part 2:internal combustion engines industrial trucks GB/T 26950.2-2015 5.3.4
General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres—Part 1:Group II engines for use in flammable gas and vapor atmospheres GB 20800.1-2006 5.2
1 Type test of flameproof enclosure Reciprocating internalcombustion engines —Safety requirements fordesign
and constructionof engines for use inpotentially explosivesatmospheres —Part 1: Group II engines for use inflammable gas and vapour atmospheres EN1834-1:2000 6.2
2
Type test of complete set and accessory parts of internal combustion engine
Reciprocating internalcombustion engines —Safety requirements fordesign and constructionof engines for use inpotentially explosivesatmospheres —Part 1: Group II engines for use inflammable gas and vapour atmospheres EN1834-1:2000 6.3
General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres—Part 1:Group II engines for use in flammable gas and vapor atmospheres GB 20800.1-2006 5.4
Only inspect by looking
3 Spark arrester test Reciprocating internalcombustion engines —Safety requirements fordesign and constructionof engines for use inpotentially explosivesatmospheres —Part 1: Group II engines for use inflammable gas and vapour atmospheres EN1834-1:2000 6.4
General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres—Part 1:Group II engines for use in flammable gas and vapor atmospheres GB 20800.1-2006 5.5
2
Explosion proof internal combustion engine
4 Pipeline leakage testReciprocating internalcombustion engines —Safety requirements fordesign and constructionof engines for use inpotentially explosivesatmospheres —Part
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 87 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
1: Group II engines for use inflammable gas and vapour atmospheres EN1834-1:2000 6.5General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres—Part 1:Group II engines for use in flammable gas and vapor atmospheres GB 20800.1-2006 附录 F
5Exhaust flame arrester flameproof performance test
Reciprocating internalcombustion engines —Safety requirements fordesign and constructionof engines for use inpotentially explosivesatmospheres —Part 1: Group II engines for use inflammable gas and vapour atmospheres EN1834-1:2000 附录 B
General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres—Part 2:Group II engines for use in flammable dust atmospheres GB 20800.2-2006 5.2
6
Type test of complete set and accessory parts of internal combustion engine
Reciprocating internalcombustion engines —Safety requirements fordesign and constructionof engines for use inpotentially explosivesatmospheres —Part 3: Group II engines for use inflammable dust atmospheres EN1834-3:2000 6.2
General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres—Part 2:Group II engines for use in flammable dust atmospheres GB 20800.2-2006 5.3
Only inspect by looking
7 Spark arrester test Reciprocating internalcombustion engines —Safety requirements fordesign and constructionof engines for use inpotentially explosivesatmospheres —Part 3: Group II engines for use inflammable dust atmospheres EN1834-3:2000 6.3
General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres—Part 2:Group II engines for use in flammable dust atmospheres GB 20800.2-2006 5.4
8 Pipeline leakage test Reciprocating internalcombustion engines —Safety requirements fordesign and constructionof engines for use inpotentially explosivesatmospheres —Part 3: Group II engines for use inflammable dust atmospheres EN1834-3:2000 6.4
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 88 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
chemistry
Explosives and related materials
Thermal analysis test method for thermal stability of materials GB/T 13464-2008 5,6,7,8
1 Thermal stability screening test Recommerndations on the Transport of Dangerous Goods: Manual of tests
and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 附录 6
Test method of thermal stability for dangerous products GB/T 21280-2007 4,5,6
2 75℃ thermal stability Recommerndations on the Transport of Dangerous Goods: Manual of tests and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 13.6.1 试验3(c)
Dangerous goods-Test of small-scale burning GB/T 21580-2008 4,5,6 3 Test of small-scale
burning Recommerndations on the Transport of Dangerous Goods: Manual of tests and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 13.7.1 试验 3(d)
Dangerous goods-Koenen test method GB/T 21578-2008 4,5,6
4 Koenen test Recommerndations on the Transport of Dangerous Goods: Manual of tests and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 11.5.1 试验
1(b), 12.5.1 试验 2(b), 18.6.1 试验 8(c)
Dangerous goods - Test method for impact sensitivity of explosives substance GB/T 21567-2008 4,5,6
5 Impact sensitivity test Recommerndations on the Transport of Dangerous Goods: Manual of tests and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 13.4.2 试验3(a)(ii)
1
Classification of dangerous chemical substancespart 1: explosive
6 Friction sensitivity test
Dangerous goods - Test method for friction sensitivity of explosives substance GB/T 21566-2008 4,5,6
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 89 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Recommerndations on the Transport of Dangerous Goods: Manual of tests and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 13.5.1 试验3(b)(i)
Standard test method for concentration limits of flammability of chemicals (vapors and gases) GB/T 21844 -2008 6,7,8,9,10,11,12
1
concentration limits of flammability/explosion of gases
Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases) ASTM E681-09(2015) 6,7,8,9,10,11,12
Dangerous goods-Test methods for heat combustion of spray aerosols GB/T 21614-2008 4,5,6,7
2 Determination of the heat of combustion Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels
by Bomb Calorimeter ASTM D240-2017 8,9,10
Dangerous goods-Ignition distance test method for aerosols GB/T 21630-2008 4,5,6,7
3 Ignition distance test for aerosol Recommerndations on the Transport of Dangerous Goods: Manual of tests
and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 31.4
Dangerous goods-Test methods of enclosed space ignition for aerosols GB/T 21631-2008 4,5,6,7
4Enclosed space ignition test for aerosols Recommerndations on the Transport of Dangerous Goods: Manual of tests
and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 31.5
Dangerous goods-Test methods of foam flammability for aerosols GB/T 21632-2008 4,5,6,7
5 foam flammability test for aerosols Recommerndations on the Transport of Dangerous Goods: Manual of tests
and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 31.6
6 first boiling point Volatile organic liquids for industrial use-Determination of boiling range GB/T 7534-2004 4,5,6,7,8,9,10
Dangerous goods - Sustained combustibility test for flammable liquids GB/T 21622-2008 3,4,5
2
Classificationof dangerous chemical substancespart 2: gases
7 Sustained combustibility test Recommerndations on the Transport of Dangerous Goods: Manual of tests
and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 32.5.2 试验 L.2
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 90 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Safety code for inspection of hazardous properties for dangerous goods of flammable solides GB19521.1-2004 4,5
Dangerous goods - Test method for burning rate of flammable solids GB/T 21618-2008 4,5,6 1 burning rateRecommerndations on the Transport of Dangerous Goods: Manual of tests and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 33.2.1.4 试验N.1
2Self-accelerating decomposition temperature
Recommerndations on the Transport of Dangerous Goods: Manual of tests and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 28.4.2 试验H.2
Dangerous goods-Koenen test method GB/T 21578-2008 4,5,6 3 Koenen test Recommerndations on the Transport of Dangerous Goods: Manual of tests
and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 25.4.1 试验 E.1
3
classificationof dangerous chemical substancespart 4: No.4.1 flammable solids,self-reactive substances,desensitizationexplosives
4 Deflagration test Recommerndations on the Transport of Dangerous Goods: Manual of tests and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 23.4.2 试验 C.2
Dangerous goods-Test methods of spontaneous combustion for flammable solids GB/T 21611-2008 4,5
1 Solid pyrophoric Recommerndations on the Transport of Dangerous Goods: Manual of tests and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 33.3.1.4 试验 N.2
4
classification of dangerous chemical substancespart 4: No.4.2 ease spontaneous combus-tion 2 Liquid pyrophoric
Recommerndations on the Transport of Dangerous Goods: Manual of tests and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 33.3.1.5 试验 N.3
1 Gas flammability test Safety code for inspection of hazardous properties for dangerous goods of flammable gas GB19521.3-2004 5
Dangerous goods-Test methods for flammable solids, which in contacting with water emit flammable gases GB/T 21619-2008 4,5,6,7 5
classificationof dangerous chemical substancespart 4: No.4.3 substances
2 Emit gases test in contacting with water Safety code for inspection of hazardous properties for dangerous good of
substances which in contact withwater emit flammable gases GB/T 19521.4-
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 91 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
2004 5which,in contact with water,emit flammable gases Recommerndations on the Transport of Dangerous Goods: Manual of tests
and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 33.4.1.4 试验N.5
Dangerous goods - Test method for oxidizing solids GB/T 21617-2008 4,5,6,7,8
1 Solid oxidation Recommerndations on the Transport of Dangerous Goods: Manual of tests and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 34.4.1 试验
O.1、34.4.3 试验 O.3:重量法
Dangerous goods-Test methods for oxidizing liquids GB/T 21620-2008 4,5,6,7
2 Liquids oxidation Recommerndations on the Transport of Dangerous Goods: Manual of tests and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 34.4.2 试验O.2
Testing method for classification of chemical hazards—Fire potential and oxidizing ability of gases and gas mixtures GB/T 27862-2011 4
6
classificationof dangerous chemical substancespart 5: No.5.1 oxidizing agents
3 Gases oxidation Gases and gas mixtures -- Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets ISO 10156-2017 5
Dangerous goods-Koenen test method GB/T 21578-2008 4,5,6 1 Koenen test Recommerndations on the Transport of Dangerous Goods: Manual of tests
and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 25.4.1 试验 E.1
2 Deflagration test Recommerndations on the Transport of Dangerous Goods: Manual of tests and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 23.4.2 试验 C.2 7
classification of dangerous chemical substancespart 5: No.5.2 organic peroxides 3
Self-accelerating decomposition temperature
Recommerndations on the Transport of Dangerous Goods: Manual of tests and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 28.4.2 试验H.2
8 classification of 1 Metal corrosion test Dangerous goods - Test method for corrosion to metals of corrosive substance
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 92 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
GB/T 21621-2008 4,5,6,7dangerous chemical substancespart 8: Corrosive substances
Recommerndations on the Transport of Dangerous Goods: Manual of tests and Criteria ( sixth revised edition) ST/SG/AC.10/11/Rev.6 37.4 试验 C.1
1Temperature of spontaneous flammable of a solid
Chemical products for industrial use - Determination of relative temperature of spontaneous flammable of solids GB/T 21756-2008 3,4,5,6
2 Boilling range Volatile organic liquids for industrial use-Determination of boiling range GB/T 7534-2004 4,5,6,7,8,9,10
Standard test method for determination of vapor pressure of petroleum products hydrocarbon and hydrocarbon-oxygenate mixtures (Triple expansion method) SH/T 0769-2005 4,6,7,8,9,10,11,12,13
Determination of vapor pressure of the chemicals-Triple expansion method SN/T 2932-2011 6,7,8,9,10 3 Vapor pressure
Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method) ASTM D6378-2018 12,13,14
4 Viscosity Methods of viscosity measurement GB/T 10247-2008 4
5 PH Water treatment reagent - General rules for the determination of pH GB/T 22592-2008 4,5,6
6 Differential thermal analysis
Thermal analysis test method for thermal stability of materials GB/T 13464-2008 5,6,7,8
7 Deflagration pointTest method of loading material for initiating explosive device-part 20:measurement of deflagration point for primary explosive-method of 5s delay time GJB 5891.20-2006 6.1
9
Physical and chemical properties of hazardous substances
8 Static electricity sensitivity
Explosives for civil uses-Propellants and rocket propellants-Part2: determ -ination of resistance to electrostatic energy EN 13938-2:2004 4
ISO/IEC 17025 认可证书
No. CNAS L1572
The scope of the accreditation in Chinese remains the definitive version.
第 93 页 共 93 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Test method fox the autoignition temperature of petroleum products GB/T 21791-2008 7,8,9,10
9
Test method fox the autoignition temperature of petroleum products
Testing of mineral oil hydrocarbons. Determination of ignition temperature DIN 51794-2003 7,8,9,10
Liquid chemicals-Test method fox the autoignition temperature GB/T 21860-2008 5,6,7,8
10
Liquid chemicals-Test method fox the autoignition temperature
Standard Test Method for Autoignition Temperature of Chemicals ASTM E659-15 4,5,6,8
Dangerous goods-Test method of self heating for flammable soilds GB/T 21612-2008 4,5,6,7
11Test method of self heating for flammable solid
Manual of Test and Criteria ST/SG/AC.10/11/Rev.6 33.3.1.6 test N.4:test method for self-heating substances Manual of Test and Criteria ST/SG/AC.10/11/Rev.6 33.3.1.6 试验 N.4
Determination of flash point Pensky-Martens closed cupmethod GB/T 261-2008 9,10,11,12,13
Standard Test Methods for Flash Point by Pensky-Martens Closed CupTester ASTM D93-2018 9,10,11,12,13,14 12 Determination of
flash pointStandard Test Methods for Flash Point by Pensky-Martens Closed CupTester ISO 2719-2016 9,10,11,12,13
13Determination of flash point of petroleum products
Determination of flash point of petroleum products-Pensky-Martens closed cuptester SN/T 2939-2011 11,12,13,14,15