Upload
hoanghanh
View
218
Download
0
Embed Size (px)
Citation preview
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 1 页 共 70 页
Name: Eurofins Testing Technology (Shenzhen) Co., Ltd.
Address: 4/F, Building# 3, Runheng Electronic Park, Building #2 & #3 Liuxian Road 2nd
Road, Xin'an Street, Bao’an District, Shenzhen, P.R. China
Registration No. CNAS L5013
Accreditation Criteria: ISO/IEC 17025 and relevant requirements of CNAS
Date of Issue: 2017-11-08 Date of Expiry: 2023-02-09
SCHEDULE 3 ACCREDITED TESTING SCOPE
Item/Parameter№ Test Object
№ Item/ ParameterStandard or Method Note
一、Toys and children's products
1 Toys and Children articles 1 Mechanical and
physical properties Safety of toys -Part2: Mechanical and physical properties GB 6675.2-2014
Except for clause: 4.16.2.2 Lid support for toy chests and similar toys; 5.13.2 Test for closures and toy chest lids
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 2 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Instructions for Use of Product of Consumer Interest-part 5:Toys GB 5296.5-2006
Safety of toys - Part 1: Safety aspects related to mechanical and physical properties ISO 8124-1: 2014
Except for clause: 4.16.2.2 Lid support for toy chests and similar toys,5.13 Test for closures and toy chest lids
Safety of toys - Part 1: Mechanical and physical properties EN 71-1:2014 BS EN 71-1:2014
Except for clause: 4.14.1c Toy chest,4.20.2.5 Toys using headphones or earphones 8.28.2.4 Toys with earphones and headphones 8.31 Toy
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 3 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
chest lids
US Consumer Product Safety Commission CPSC 16CFR 1500.19,1500.48,1500.49,1500.50,1500.51,1500.52,1500.53,1501,1510,1511Standard Consumer Safety Specification for Toy Safety ASTM F963-16 4.1 Material quality;4.3.7 Stuffing Materials; 4.5 sound-producing toys;4.6 Small objects ; 4.7 Accessible edges; 4.8 Projections; 4.9 Accessible points; 4.10 Wires and rods; 4.11 Nails and fasteners; 4.12 Plastic film; 4.13 Folding mechanisms and hinges;Standard Consumer Safety Specification for Toy Safety ASTM F963-16 4.14 Cords and elastics in toys; 4.15 stability and over-load requirement;4.16 Confined spaces; 4.17 Wheels, tires, and axles; 4.18 Holes, clearance, and accessibility of mechanisms;4.19 Simulated protective devices; 4.20.2 Pacifiers; 4.21 Projectile toys;4.22 Teethers and teething toys;Standard Consumer Safety Specification for Toy Safety ASTM F963-16 4.23 Rattles; 4.24 Squeeze toys; 4.26 Toys intended to be attached to a crib or playpen; 4.27 Stuffed and beanbag-type toys; 4.28 Stroller and carriage toys; 4.30 Toy gun marking; 4.31 Balloons; 4.32 Certain toys with nearly spherical ends;Standard Consumer Safety Specification for Toy Safety ASTM F963-16 4.33 Marbles; 4.34 Balls; 4.35 Pompoms; 4.36 Hemispheric-shaped objects; 4.37 Yo Yo Elastic Tether Toys; 4.38 Magnets; 4.39 Jaw entrapment in handles and steering wheels;4.40 Expanding Materials; 5 Safety labeling requirements; 6 Instructional literature; 7 Producer's markings; 8.1 General;Standard Consumer Safety Specification for Toy Safety ASTM F963-16 6 Instructional Literature;7Producer's Markings;8.1 General Requirements;8.5 Normal use testing; 8.6 Abuse testing; 8.7 Impact tests; 8.8 Torque tests for removal of components; 8.9 Tension tests for removal of components;8.10 Compression testStandard Consumer Safety Specification for Toy Safety ASTM F963-16 8.11Compression Test; 8.12Flexure Test; 8.13 Test for Mouth-Actuated Toys
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 4 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
and Mouth-Actuated Projectile Toys
Standard Consumer Safety Specification for Toy Safety ASTM F963-16 8.14 Projectiles; 8.15 tests for stability of ride - on toys or toys seats; 8.16 Pompoms tension tests; 8.17Stalled Motor Test for Battery-Operated Toys 8.20 test for toys which produce noise 8.21 dynamic strength test for wheeled ride - on toys;Standard Consumer Safety Specification for Toy Safety ASTM F963-16 8.22 Plastic Film Thickness; 8.23 Test for loops and cords; 8.24 Yo Yo Elastic Tether Toy Test Methods8.25 Magnet Test Methods8.26 Test methods for locking mechanisms for other means
Safety of toys Part 1: Safety aspects related to mechanical and physical properties AS/NZS ISO 8124.1:2016
Except for clause: 4.16.2.2 Lid support for toy chests and similar toys, 5.13 Test for closures and toy chest lids
Canada Toys Regulations SOR/2011-17 4 Packaging; 7 Small objects; 8 Metal edges; 9 Wires; 10 Plastic components or toys; 11 Accessible wood; 12 Glass; 13 Fasteners;14 Folding mechanism; 15 Spring-wound; 16 Projectile component; 17 Toy can be entered with closed lid by child;18 Stationary item intended to bear the weight of a child
Standard Consumer Safety Specification for Toy Safety ASTM F963-16 8.27 except for 8.27.1 Lid
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 5 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Tests for Toy Chest Lids and Closures; 8.28 Test for Overload of Ride-On Toys and Toy Seats; 8.29Stuffing Materials Evaluation; 8.30Expanding Materials – Test Method
Support Mechanisms
Canada Toys Regulations SOR/2011-17 19 Noise level of toys 28 Sharp edge or point;29 Stuffing materials; 30 Squeaker, reed and valve; 31 Eye or nose; 35 Plant seeds-Noise; 36 Plant seeds-Stuffing material; 37 Pull and push toys; 39 Finger paints; 40 Rattles; 41 Elastic; 42 Yo-Yo type ballsProduct Safety Bureau Reference Manual Book 5 - Laboratory Policies and Procedures Part B: Test Methods Section, M-00.1 M-00.2 M-00.3 M-01.1 M-01.2 M-03 M-04 M-05Canada Consumer Product Safety ActS.C. 2010, c. 21 Schedule II 1 Jequirity beans3 Baby walkers5 Feeding bottles8 Kites9 Kite strings14 Lawn, darts with elongated tipsChild use and care articles - Cutlery and feeding utensils -Safety requirements and tests EN 14372:2004 BS EN 14372:2004 5.1 General 5.2 General requirements 5.3 Mechanical requirements 5.3.1 Tensile strength 5.3.2 Torque test 5.3.3 Tear resistance 5.3.4 Strength/rigidity 5.3.5 Drop test 7 Product informationChild use and care articles. Drinking equipment. General and mechanical requirements and tests EN 14350-1:2004 BS EN 14350-1:2004
Child use and care articles. Soothers for babies and young children. Mechanical requirements and tests EN 1400:2013+A1:2014 BS EN 1400:2013+A1:2014 Accreditated only for:6 General 7 Printing and decals 8 Construction properties and tests 9 Mechanical properties 11 Teat protectors 12 Consumer packaging 13 Product information
Except for clause: 9.5 Bite edurance of elastomeric components
Child use and care articles - Soother holder - Safety requirements and test methods EN 12586:2007+A1:2011 BS EN 12586:2007+A1:2011
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 6 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Accreditated only for:5.1 General requirements 5.2 Mechanical requirements 5.2.1 Impact resistance 5.2.2 Durability of the garment fastener 5.2.3 Tensile strength 7 Consumer packaging 8 Product information
Safety of toys-Part 3:Flammability GB 6675.3-2014
Except for:flammable gases, highly flammableliquids, flammable liquids, and flammable gels.
2 Flammability
Safety of toys - Part 2: Flammability ISO 8124-2: 2014
Except for:flammable gases, extremely flammable liquids, highly flammableliquids, flammable liquids, and flammable gels.
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 7 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Safety of toys - Part 2: Flammability EN 71-2: 2011+A1:2014 BS EN 71-2: 2011+A1:2014
Except for:flammable gases, extremely flammable liquids, highly flammable liquids,flammable liquids and flammable gels
Standard Consumer Safety Specification for Toy Safety ASTM F963-16 Section 4.2, Flammability; A5 Flammability Testing Procedure for Solids and Soft Toys; A6 Flammability Testing Procedure for Fabrics
Methods for determining extremely flammable and flammable solids 16 CFR 1500.44
Except for granules, powders and pastes
Safety of toys Part 2:Flammability AS/NZS ISO 8124.2:2016
Except for:flammable gases, extremely flammable liquids, highly flammable
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 8 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
liquids, flammable liquids, and flammable gels.
Canada Consumer Product Safety Act S.C. 2010, c. 21 Schedule II Clause 2 Cellulose nitrateCanada Toys Regulations SOR/2011-17 Clause 21 Celluloid or cellulose nitrate; 32 Outer covering flat or raised fibre textile material; 33 Exposed surface yarn; 34 Hair, or mane, or simulated hair other than yarnProduct Safety Bureau Reference Manual Book 5 - Laboratory Policies and Procedures Part B: Test Methods Section, Method F-02 Test method for the flammability of toys
Safety of toys―Part 4: Migration of certain elements GB 6675.4-2014
Safety of toys Part 3: Migration of certain elements ISO 8124-3:2010+A1:2014;Safety of toys Part 3: Migration of certain elements AS/NZS ISO 8124.3:2016Standard Consumer Safety Specification for Toy Safety ASTM F963-11, 4.3.5.1(2), 4.3.5.2(2), 8.3
3Migration of certain elements: Ba, As, Sb, Se, Cd, Pb, Cr, Hg
Canadian Product Safety Laboratory Reference Manual Book 5 – Laboratory Policies and Procedures Part B: Test method C03:2014
4
Migration of certain elements: Al, Sb, As, Ba, B, Cd, Cr(III), Cr(VI), Co, Cu, Pb, Mn, Hg, Ni, Se, Sr,
Safety of toys-Part3:Migration of certain elements EN 71-3:2013+A1:2014 BS EN 71-3:2013+A1:2014 DIN EN 71-3:2013+A1:2014
Except for LC-ICP-MS method
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 9 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Sn, Organic tin, Zn
United States Consumer Product Safety Commission Directorate for Laboratory Sciences Division of Chemistry-Standard Operating Procedure for Determining Total Lead (Pb) in Metal Children’s Products (including Children’s Metal Jewelry) CPSC-CH-E1001-08.3Standard Consumer Safety Specification for Toy Safety ASTM F963-11, 4.3.5.1(1), 8.3.1United States Consumer Product Safety Commission Directorate for Laboratory Sciences Division of Chemistry-Standard Operating Procedure for Determining Total Lead (Pb) in Non-Metal Children’s Products CPSC-CH-E1002-08.3Standard Consumer Safety Specification for Toy Safety ASTM F963-11, 4.3.5.2(2)(a), 8.3.1United States Consumer Product Safety Commission Directorate for Laboratory Sciences Division of Chemistry-Standard Operating Procedure for Determining Total Lead (Pb) in Paint and Other Similar Surface Coatings CPSC-CH-E1003-09.1Standard Consumer Safety Specification for Toy Safety ASTM F963-11, 4.3.5.2(2)(a), 8.3.1Canadian Product Safety Laboratory Reference Manual Book 5 – Laboratory Policies and Procedures Part B: test method C02.2:2012Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis、Inductively coupled plasma-atomic emission spectrometry ASTM E1645-01(2016)e1、EPA 6010D: 2014Standard Specification for Consumer Product Safety for Children’s Jewelry ASTM F2923-14 clause 5
5 Total lead content
Standard Test Method forDetermination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 10 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams ASTM F2853-10 (2015)
6 Total mercury content
Canadian Product Safety Laboratory Reference Manual Book 5 – Laboratory Policies and Procedures CPSC Part B Method C07:2015Toys and children’s products - Determination of phthalate plasticizers in polyvinyl chloride plastic GB/T 22048-2015Safety of toys - Part 6: Certain phthalate esters in toys and childrens products ISO 8124-6:20147 Determination of
Phthalates CPSIA Sec.108Standard Operating Procedure for Determination of Phthalates CPSC-CH-C1001-09.3Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin EN 1811:2011+A1:2015 BS EN 1811:2011+A1:2015 DIN EN 1811:2011+A1:2015Method for the simulation of wear and corrosion for the detection of nickel release from coated items EN 12472:2005+A1:2009 BS EN 12472:2005+A1:2009 DIN EN 12472:2005+A1:2009
8 Nickel Release content
Ophthalmic optics. Reference method for the testing of spectacle frames and sunglasses for nickel release EN 16128: 2015 BS EN16128: 2015 DIN EN16128: 2015
Ultrasonic extraction EPA 3550C:2007
9Organotin Compoundscontent
Water Quality – Determination of Selected Organotin Compounds – Gas Chromatographic Method ISO 17353: 2004EN ISO 17353:2005 BS EN ISO 17353:2005
10 Cadmium MigrationUnited States Consumer Product Safety Commission Directorate for Laboratory Sciences Division of Chemistry-Standard Operating Procedure for Determining Cadmium (Cd) Extractability form Children’s Metal Jewelry
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 11 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
CPSC-CH-E1004-11
Standard Specification for Consumer Product Safety for Children's Jewelry ASTM F2923-14 Clause 9 Specification for Cadmium in Children’s JewelryClause 13.5 and 13.6 Extraction Procedure for Cadmium
11 Organic chemical compounds
Safty of toys part 9 - Organic chemical compounds -requirements;Safty of toys part 10-Organic chemical compounds-sample preperation and extraction; Saftyof toys part 11-Organic chemical compounds- methods of analysis EN 71-9:2005 + A1:2007;EN 71-10:2005;EN 71-11:2005
12 Flame retardants contant
Ultrasonic extraction;Semivolatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS) EPA 3550C:2007 EPA 8270D:2014
Electric toys—Safety GB 19865-2005 4.General requirement5.General conditions for the tests6.Criteria for reduced testing7.Marking and instructions8.Power input9. Heating and abnormal operation10. Electric strength at operating temperature11.Moisture resistance
Except for clause: 16.1 Switches and automatic controls carrying a current exceeding 3A; 20 Radiation, toxicity and similar harzards
13 Electric Safety
Electric toys—Safety GB 19865-2005 12.Electric strength at room temperature13. Mechanical strength14. Construction15. Protection of cords
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 12 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
and wires16. Components17. Screws and connections18.Clearances and creepage distances19. Resistance to heat and fire
Electric toys—Safety IEC 62115 Ed 1.2 (2011) 4.General requirement5.General conditions for the tests6.Criteria for reduced testing7.Marking and instructions8.Power input9. Heating and abnormal operation10. Electric strength at operating temperature11.Moisture resistance
Except for clause:16.1Switches and automatic controls carrying a current exceeding 3A;20. Radiation, toxicity and similar hazards
Electric toys—Safety IEC 62115 Ed 1.2 (2011) 12.Electric strength at room temperature13. Mechanical strength14. Construction15. Protection of cords and wires16. Components17. Screws and connections18.Clearances and creepage distances19. Resistance to heat and fire
Electric toys—Safety EN 62115:2005+A12:2015BS EN 62115:2005+A12:2015 4.General requirement5.General conditions for the tests6.Criteria for reduced testing7.Marking and instructions8.Power input9. Heating and abnormal operation10. Electric strength at operating temperature11.Moisture resistance
Except for clause 9.9 of coated metal surface temperature;clause:16.1Switches and automatic controls
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 13 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
carrying a current exceeding 3A;20. Radiation, toxicity and similar hazards
Electric toys—Safety EN 62115:2005+A12:2015 BS EN 62115:2005+A12:2015 12.Electric strength at room temperature13. Mechanical strength14. Construction15. Protection of cords and wires16. Components17. Screws and connections18.Clearances and creepage distances19. Resistance to heat and fire
Standard consumer safety specification for toy safety ASTM F963-16 4.25 Battery Operated Toys
Except for clause: 4.25.10 battery- powered rid-on toys, 4.25.11Toys that Contain Secondary Cells or Secondary Batteries
Electric Toys - Safety AS/NZS 62115:2011 4.General requirement5.General conditions for the tests6.Criteria for reduced testing7.Marking and instructions8.Power input9. Heating and abnormal operation10. Electric strength at operating temperature11.Moisture resistance
Except for clause:16.1Switches and
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 14 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
automatic controls carrying a current exceeding 3A;20. Radiation, toxicity and similar hazards
Electric Toys - Safety AS/NZS 62115:2011 12.Electric strength at room temperature13. Mechanical strength14. Construction15. Protection of cords and wires16. Components17. Screws and connections18.Clearances and creepage distances19. Resistance to heat and fire
Safety of toys -Part2: Mechanical and physical properties GB 6675.2-2014
Except for clause: 4.16.2.2 Lid support for toy chests and similar toys; 5.13.2 Test for closures and toy chest lids
Instructions for Use of Product of Consumer Interest-part 5:Toys GB 5296.5-2006
2 Toys and Children articles 1 Mechanical and
physical properties
Safety of toys - Part 1: Safety aspects related to mechanical and physical Except for
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 15 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
properties ISO 8124-1: 2014 clause: 4.16.2.2 Lid support for toy chests and similar toys,5.13 Test for closures and toy chest lids
Safety of toys - Part 1: Mechanical and physical properties EN 71-1:2014 BS EN 71-1:2014
Except for clause: 4.14.1c Toy chest,4.20.2.5 Toys using headphones or earphones 8.28.2.4 Toys with earphones and headphones 8.31 Toy chest lids
US Consumer Product Safety Commission CPSC 16CFR 1500.19,1500.48,1500.49,1500.50,1500.51,1500.52,1500.53,1501,1510,1511
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 16 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Standard Consumer Safety Specification for Toy Safety ASTM F963-17 4.1 Material quality;4.3.7 Stuffing Materials; 4.5 sound-producing toys;4.6 Small objects ; 4.7 Accessible edges; 4.8 Projections; 4.9 Accessible points; 4.10 Wires and rods; 4.11 Nails and fasteners; 4.12 Plastic film; 4.13 Folding mechanisms and hinges;Standard Consumer Safety Specification for Toy Safety ASTM F963-17 4.14 Cords and elastics in toys; 4.15 stability and over-load requirement;4.16 Confined spaces; 4.17 Wheels, tires, and axles; 4.18 Holes, clearance, and accessibility of mechanisms;4.19 Simulated protective devices; 4.20.2 Pacifiers; 4.21 Projectile toys;4.22 Teethers and teething toys;
4.21 Change the test requirement
Standard Consumer Safety Specification for Toy Safety ASTM F963-17 4.23 Rattles; 4.24 Squeeze toys; 4.26 Toys intended to be attached to a crib or playpen; 4.27 Stuffed and beanbag-type toys; 4.28 Stroller and carriage toys; 4.30 Toy gun marking; 4.31 Balloons; 4.32 Certain toys with nearly spherical ends;Standard Consumer Safety Specification for Toy Safety ASTM F963-17 4.33 Marbles; 4.34 Balls; 4.35 Pompoms; 4.36 Hemispheric-shaped objects; 4.37 Yo Yo Elastic Tether Toys; 4.38 Magnets; 4.39 Jaw entrapment in handles and steering wheels;4.40 Expanding Materials;4.41 Toy chests 5 Safety labeling requirements; 6 Instructional literature; 7 Producer's markings; 8.1 General;Standard Consumer Safety Specification for Toy Safety ASTM F963-17 6 Instructional Literature;7Producer's Markings;8.1 General Requirements;8.5 Normal use testing; 8.6 Abuse testing; 8.7 Impact tests; 8.8 Torque tests for removal of components; 8.9 Tension tests for removal of components;8.10 Compression testStandard Consumer Safety Specification for Toy Safety ASTM F963-17 8.11Compression Test; 8.12Flexure Test; 8.13 Test for Mouth-Actuated Toys and Mouth-Actuated Projectile Toys
Standard Consumer Safety Specification for Toy Safety ASTM F963-17 8.14
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 17 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Projectiles; 8.15 tests for stability of ride - on toys or toys seats; 8.16 Pompoms tension tests; 8.17Stalled Motor Test for Battery-Operated Toys 8.20 test for toys which produce noise 8.21 dynamic strength test for wheeled ride - on toys;Standard Consumer Safety Specification for Toy Safety ASTM F963-17 8.22 Plastic Film Thickness; 8.23 Test for loops and cords; 8.24 Yo Yo Elastic Tether Toy Test Methods8.25 Magnet Test Methods8.26 Test methods for locking mechanisms for other means
Standard Consumer Safety Specification for Toy Safety ASTM F963-17 8.27 Tests for Toy Chest Lids and Closures; 8.28 Test for Overload of Ride-On Toys and Toy Seats; 8.29Stuffing Materials Evaluation; 8.30Expanding Materials – Test Method
except for 8.27.1 Lid Support Mechanisms
Safety of toys Part 1: Safety aspects related to mechanical and physical properties AS/NZS ISO 8124.1:2016
Except for clause: 4.16.2.2 Lid support for toy chests and similar toys, 5.13 Test for closures and toy chest lids
Canada Toys Regulations SOR/2011-17 4 Packaging; 7 Small objects; 8 Metal edges; 9 Wires; 10 Plastic components or toys; 11 Accessible wood; 12 Glass; 13 Fasteners;14 Folding mechanism; 15 Spring-wound; 16 Projectile component; 17 Toy can be entered with closed lid by child;18 Stationary item intended to bear the weight of a child
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 18 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Canada Toys Regulations SOR/2011-17 19 Noise level of toys 28 Sharp edge or point;29 Stuffing materials; 30 Squeaker, reed and valve; 31 Eye or nose; 35 Plant seeds-Noise; 36 Plant seeds-Stuffing material; 37 Pull and push toys; 39 Finger paints; 40 Rattles; 41 Elastic; 42 Yo-Yo type ballsProduct Safety Bureau Reference Manual Book 5 - Laboratory Policies and Procedures Part B: Test Methods Section, M-00.1 M-00.2 M-00.3 M-01.1 M-01.2 M-03 M-04 M-05Canada Consumer Product Safety ActS.C. 2010, c. 21 Schedule II 1 Jequirity beans3 Baby walkers5 Feeding bottles8 Kites9 Kite strings14 Lawn, darts with elongated tipsChild use and care articles - Cutlery and feeding utensils -Safety requirements and tests EN 14372:2004 BS EN 14372:2004 5.1 General 5.2 General requirements 5.3 Mechanical requirements 5.3.1 Tensile strength 5.3.2 Torque test 5.3.3 Tear resistance 5.3.4 Strength/rigidity 5.3.5 Drop test 7 Product informationChild use and care articles. Drinking equipment. General and mechanical requirements and tests EN 14350-1:2004 BS EN 14350-1:2004
Child use and care articles. Soothers for babies and young children. Mechanical requirements and tests EN 1400:2013+A1:2014 BS EN 1400:2013+A1:2014 Accreditated only for:6 General 7 Printing and decals 8 Construction properties and tests 9 Mechanical properties 11 Teat protectors 12 Consumer packaging 13 Product information
Except for clause: 9.5 Bite edurance of elastomeric components
Child use and care articles - Soother holder - Safety requirements and test methods EN 12586:2007+A1:2011 BS EN 12586:2007+A1:2011 Accreditated only for:5.1 General requirements 5.2 Mechanical requirements 5.2.1 Impact resistance 5.2.2 Durability of the garment fastener 5.2.3 Tensile strength 7 Consumer packaging 8 Product information
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 19 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Safety of toys-Part 3:Flammability GB 6675.3-2014
Except for:flammable gases, highly flammableliquids, flammable liquids, and flammable gels.
Safety of toys - Part 2: Flammability ISO 8124-2: 2014
Except for:flammable gases, extremely flammable liquids, highly flammableliquids, flammable liquids, and flammable gels.
2 Flammability
Safety of toys - Part 2: Flammability EN 71-2: 2011+A1:2014 BS EN 71-2: 2011+A1:2014
Except for:flammable
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 20 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
gases, extremely flammable liquids, highly flammable liquids,flammable liquids and flammable gels
Standard Consumer Safety Specification for Toy Safety ASTM F963-17 Section 4.2, Flammability; A5 Flammability Testing Procedure for Solids and Soft Toys; A6 Flammability Testing Procedure for Fabrics
Methods for determining extremely flammable and flammable solids 16 CFR 1500.44
Except for granules, powders and pastes
Safety of toys Part 2:Flammability AS/NZS ISO 8124.2:2016
Except for:flammable gases, extremely flammable liquids, highly flammableliquids, flammable liquids,
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 21 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
and flammable gels.
Canada Consumer Product Safety Act S.C. 2010, c. 21 Schedule II Clause 2 Cellulose nitrateCanada Toys Regulations SOR/2011-17 Clause 21 Celluloid or cellulose nitrate; 32 Outer covering flat or raised fibre textile material; 33 Exposed surface yarn; 34 Hair, or mane, or simulated hair other than yarnProduct Safety Bureau Reference Manual Book 5 - Laboratory Policies and Procedures Part B: Test Methods Section, Method F-02 Test method for the flammability of toys
Safety of toys―Part 4: Migration of certain elements GB 6675.4-2014
Safety of toys Part 3: Migration of certain elements ISO 8124-3:2010+A1:2014;Safety of toys Part 3: Migration of certain elements AS/NZS ISO 8124.3:2016Standard Consumer Safety Specification for Toy Safety ASTM F963-17, 4.3.5.1(2), 4.3.5.2(2), 8.3
3Migration of certain elements: Ba, As, Sb, Se, Cd, Pb, Cr, Hg
Canadian Product Safety Laboratory Reference Manual Book 5 – Laboratory Policies and Procedures Part B: Test method C03:2014
4
Migration of certain elements: Al, Sb, As, Ba, B, Cd, Cr(III), Cr(VI), Co, Cu, Pb, Mn, Hg, Ni, Se, Sr, Sn, Organic tin, Zn
Safety of toys-Part3:Migration of certain elements DIN EN 71-3:2013+A2:2017;BS EN 71-3:2013+A2:2017;EN 71-3:2013+A2:2017
Except for LC-ICP-MS method
5 Total lead content United States Consumer Product Safety Commission Directorate for
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 22 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Laboratory Sciences Division of Chemistry-Standard Operating Procedure for Determining Total Lead (Pb) in Metal Children’s Products (including Children’s Metal Jewelry) CPSC-CH-E1001-08.3Standard Consumer Safety Specification for Toy Safety ASTM F963-17 4.3.5.1(1), 8.3.1United States Consumer Product Safety Commission Directorate for Laboratory Sciences Division of Chemistry-Standard Operating Procedure for Determining Total Lead (Pb) in Non-Metal Children’s Products CPSC-CH-E1002-08.3Standard Consumer Safety Specification for Toy Safety ASTM F963-17 4.3.5.2(2)(a), 8.3.1United States Consumer Product Safety Commission Directorate for Laboratory Sciences Division of Chemistry-Standard Operating Procedure for Determining Total Lead (Pb) in Paint and Other Similar Surface Coatings CPSC-CH-E1003-09.1Standard Consumer Safety Specification for Toy Safety ASTM F963-11, 4.3.5.2(2)(a), 8.3.1Canadian Product Safety Laboratory Reference Manual Book 5 – Laboratory Policies and Procedures Part B: test method C02.2:2012Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis、Inductively coupled plasma-atomic emission spectrometry ASTM E1645-01(2016)e1、EPA 6010D: 2014Standard Specification for Consumer Product Safety for Children’s Jewelry ASTM F2923-14 clause 5Standard Test Method forDetermination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams ASTM F2853-10 (2015)
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 23 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
6 Total mercury content
Canadian Product Safety Laboratory Reference Manual Book 5 – Laboratory Policies and Procedures CPSC Part B Method C07:2015Toys and children’s products - Determination of phthalate plasticizers in polyvinyl chloride plastic GB/T 22048-2015Safety of toys - Part 6: Certain phthalate esters in toys and childrens products ISO 8124-6:20147 Determination of
PhthalatesCPSIA Sec.108Standard Operating Procedure for Determination of Phthalates CPSC-CH-C1001-09.3Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin EN 1811:2011+A1:2015 BS EN 1811:2011+A1:2015 DIN EN 1811:2011+A1:2015Method for the simulation of wear and corrosion for the detection of nickel release from coated items EN 12472:2005+A1:2009 BS EN 12472:2005+A1:2009 DIN EN 12472:2005+A1:2009
8 Nickel Release content
Ophthalmic optics. Reference method for the testing of spectacle frames and sunglasses for nickel release EN 16128: 2015 BS EN16128: 2015 DIN EN16128: 2015
Ultrasonic extraction EPA 3550C:2007
9 Organotin Compoundscontent
Water Quality – Determination of Selected Organotin Compounds – Gas Chromatographic Method ISO 17353: 2004EN ISO 17353:2005 BS EN ISO 17353:2005United States Consumer Product Safety Commission Directorate for Laboratory Sciences Division of Chemistry-Standard Operating Procedure for Determining Cadmium (Cd) Extractability form Children’s Metal Jewelry CPSC-CH-E1004-1110 Cadmium Migration
Standard Specification for Consumer Product Safety for Children's Jewelry ASTM F2923-14 Clause 9 Specification for Cadmium in Children’s
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 24 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
JewelryClause 13.5 and 13.6 Extraction Procedure for Cadmium
11 Organic chemical compounds
Safty of toys part 9 - Organic chemical compounds -requirements;Safty of toys part 10-Organic chemical compounds-sample preperation and extraction; Saftyof toys part 11-Organic chemical compounds- methods of analysis EN 71-9:2005 + A1:2007;EN 71-10:2005;EN 71-11:2005
12 Flame retardants contant
Ultrasonic extraction;Semivolatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS) EPA 3550C:2007 EPA 8270D:2014
Electric toys—Safety GB 19865-2005 4.General requirement5.General conditions for the tests6.Criteria for reduced testing7.Marking and instructions8.Power input9. Heating and abnormal operation10. Electric strength at operating temperature11.Moisture resistance
Except for clause: 16.1 Switches and automatic controls carrying a current exceeding 3A; 20 Radiation, toxicity and similar harzards
Electric toys—Safety GB 19865-2005 12.Electric strength at room temperature13. Mechanical strength14. Construction15. Protection of cords and wires16. Components17. Screws and connections18.Clearances and creepage distances19. Resistance to heat and fire
13 Electric Safety
Electric toys—Safety IEC 62115 Ed 1.2 (2011) 4.General requirement Except for
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 25 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
5.General conditions for the tests6.Criteria for reduced testing7.Marking and instructions8.Power input9. Heating and abnormal operation10. Electric strength at operating temperature11.Moisture resistance
clause:16.1Switches and automatic controls carrying a current exceeding 3A;20. Radiation, toxicity and similar hazards
Electric toys—Safety IEC 62115 Ed 1.2 (2011) 12.Electric strength at room temperature13. Mechanical strength14. Construction15. Protection of cords and wires16. Components17. Screws and connections18.Clearances and creepage distances19. Resistance to heat and fire
Electric toys—Safety EN 62115:2005+A12:2015BS EN 62115:2005+A12:2015 4.General requirement5.General conditions for the tests6.Criteria for reduced testing7.Marking and instructions8.Power input9. Heating and abnormal operation10. Electric strength at operating temperature11.Moisture resistance
Except for clause 9.9 of coated metal surface temperature;clause:16.1Switches and automatic controls carrying a current exceeding
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 26 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
3A;20. Radiation, toxicity and similar hazards
Electric toys—Safety EN 62115:2005+A12:2015 BS EN 62115:2005+A12:2015 12.Electric strength at room temperature13. Mechanical strength14. Construction15. Protection of cords and wires16. Components17. Screws and connections18.Clearances and creepage distances19. Resistance to heat and fire
Standard consumer safety specification for toy safety ASTM F963-17 4.25 Battery Operated Toys
Except for clause: 4.25.10 battery- powered rid-on toys, 4.25.11Toys that Contain Secondary Cells or Secondary Batteries
Electric Toys - Safety AS/NZS 62115:2011 4.General requirement5.General conditions for the tests6.Criteria for reduced testing7.Marking and instructions8.Power input9. Heating and abnormal operation10. Electric strength at operating temperature11.Moisture resistance
Except for clause:16.1Switches and automatic controls carrying a
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 27 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
current exceeding 3A;20. Radiation, toxicity and similar hazards
Electric Toys - Safety AS/NZS 62115:2011 12.Electric strength at room temperature13. Mechanical strength14. Construction15. Protection of cords and wires16. Components17. Screws and connections18.Clearances and creepage distances19. Resistance to heat and fire
二、Textiles
Textiles--Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change GB/T 8628-2013Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change ISO 3759:2011;BS EN ISO 3759:2011;DIN EN ISO 3759:2011;EN ISO 3759:2011Textiles -Domestic washing and drying procedures for textile testing GB/T 8629-2001Textiles -- Domestic washing and drying procedures for textile testing ISO 6330:2012;BS EN ISO 6330:2012;DIN EN ISO 6330:2012;EN ISO 6330:2012Determination of Dimensional Change in Washing and Drying GB/T 8630-2013
1 Textiles 1 Dimensional Stability
Textiles-Determination of Dimensional Change in Washing and Drying ISO 5077:2007;BS EN ISO 5077:2008;EN ISO 5077:2008;DIN EN ISO 5077:2008
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 28 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Test method for relaxation dimensional change and felting dimesional change to washing of wool textiles FZ/T 70009-2012Textiles - Determination of spirality after laundering - Part 2: Woven and knitted fabrics GB/T 23319.2-20092 Spirality after
laundering Textiles—Determination of spirality after laundering—Part 3:Woven and knitted garments GB/T 23319.3-2010
Textiles - Fabrics - Determination of width and length GB/T 4666-2009
Textiles -- Woven fabrics -- Measurement of width of pieces ISO 22198:2006Textiles - Fabrics - Determination of width and length BS EN 1773:1997;EN 1773:1996Standard Test Methods for Width of Textile Fabric ASTM D3774- 96(2012)
3 Width of Textile Fabric
Standard Specification for Tolerances for Knitted Fabrics ASTM D3887-96 (2008)Textiles—Tensile properties of fabrics—Part 1:Determination of maximum force and elongation at maximum force using the strip method GB/T 3923.1-2013Textiles—Tensile properties of fabrics—Part 2:Determination of maximum force using the grab method GB/T 3923.2-2013Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method ISO 13934-1:2013BS EN ISO13934-1:2013DIN EN ISO13934-1:2013EN ISO13934-1:2013Textiles- Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method ISO 13934-2:2014;EN ISO 13934-2:2014;BS EN ISO 13934-2:2014;DIN EN ISO 13934-2:2014
4 Tensile properties
Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) ASTM D 5035-11(2015)
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 29 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Standard Test Method for Breaking Force and Elongation of Textile Fabrics(Grab Method) ASTM D 5034-09(2013)Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) GB/T 3917.1-2009Textiles-Tear properties of fabrics- Part 2 :Determination of tear force of trouser-shaped test specimens(Single tear method) GB/T 3917.2-2009Textiles -Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) ISO 13937-1:2000+C1:2004;EN ISO 13937-1:2000+AC: 2006;BS EN ISO 13937-1:2000;DIN EN ISO 13937-1:2000Textiles - Tear properties of fabrics -Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) ISO 13937-2:2000;EN ISO 13937-2:2000;BS EN ISO 13937-2:2000;DIN EN ISO 13937-2:2000Standard Test Method for Tearing strength of Fabrics by Falling - Pendulum Type (Elmendorf-Type) Apparatus ASTM D 1424-2013
5 Tear properties
Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine) ASTM D 2261-2013Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method GB/T 13773.1-2008Textiles-seam tensile properties of fabrics and made-up textile articles-Part 2:Determination of maximum force to seam rupture using the grab method GB/T 13773.2-2008
6 Seam properties
Textiles- Determination of the slippage resistance of yarns at a seam in woven fabrics- Part 1: Fixed seam opening method GB/T 13772.1-2008
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 30 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method GB/T 13772.2-2008Textiles-seam tensile properties of fabrics and made-up textile articles-Part 2:Determination of maximum force to seam rupture using the grab method ISO 13935-2:2014;EN ISO 13935-2:2014;BS EN ISO 13935-2:2014;DIN EN ISO 13935-2:2014Textiles- Determination of the slippage resistance of yarns at a seam in woven fabrics- Part 1: Fixed seam opening method ISO 13936-1:2004;EN ISO 13936-1:2004;BS EN ISO 13936-1:2004;DIN EN ISO 13936-1:2004Textiles- Determination of the slippage resistance of yarns at a seam in woven fabrics- Part 2: Fixed load method ISO 13936-2:2004Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics ASTM D1683/D1683M-2011
Textiles--Woven fabrics --Determination of mass per unit length and mass per unit area GB/T 4669-2008
Accredited only for method 5 and method 6
Textiles-Woven fabrics- Determination of mass per unit length and mass per unit area ISO 3801:1977
Accredited only for method 5
Textiles-Woven fabrics- Determination of mass per unit length and mass per unit area BS 2471:2005
Standard Test Methods for Mass Per Unit Area (Weight) of Fabric ASTM D 3776 / D3776M -(09)2013
Accredited only for method C
7 Fabric weight
Textiles-Fabrics- Determination of mass per unit area using small samples BS EN 12127:1998
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 31 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
EN 12127:1997
Textiles- Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method GB/T 4802.2-2008Textiles- Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method ISO 12945-2:2000;EN ISO 12945-2:2000;BS EN ISO 12945-2:2000;DIN EN ISO 12945-2:2000
8 Pilling Resistance
Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textiles Fabrics: Martindale Tester ASTM D4970/D4970M-2016Textiles-Determination of the abrasion resistance of fabrics by the Martindale method-Part 2: Determination of specimen breakdown GB/T 21196.2-2007Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss GB/T 21196.3-2007Textiles—Determination of the abrasion resistance of fabrics by the Martindale metod—Part 4:Assessment of appearance change GB/T 21196.4-2007Textiles-Determination of the abrasion resistance of fabrics by the Martindale method-Part 2: Determination of specimen breakdown ISO 12947-2:1998+C1:2002; BS EN ISO 12947-2: 1999+ C1: 2008;DIN EN ISO 12947-2:1998+ AC:2007;EN ISO 12947-2:1998+ AC: 2006
9 Abrasion Resistance
Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method) ASTM D 4966-2012Textiles - Testing and evaluation for water resistance - Spray test method GB/T 4745-201210 Water repellency Textile fabrics-Determination of resistance to surface wetting (spray test) ISO 4920:2012;BS EN ISO 4920:2012;DIN EN 4920:2012;EN 4920:2012;
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 32 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Water Repellency: Spray Test AATCC 22-2014
Textiles -- Tests for color fastness -Color fastness to rubbing GB/T 3920-2008Textiles - Tests for color fastness- Part X12: Color fastness to rubbing ISO 105-X12: 2016;BS EN ISO 105- X12:2016;DIN EN ISO 105- X12: 2016;EN ISO 105- X12: 2016
11 Color fastness to rubbing
Colorfastness to Crocking: AATCC Crockmeter Method AATCC 8:2013
Textiles--Tests for color fastness--Color fastness to water GB/T 5713-2013Textiles -- Tests for color fastness -- Part E01: Color fastness to water ISO 105-E01: 2013 EN ISO 105-E01: 2013 BS EN ISO 105-E01: 2013 DIN EN ISO 105-E01: 2013
12 Color fastness to water
Colorfastness to Water AATCC 107-2013Textiles-Tests for color fastness- Color fastness to perspiration GB/T 3922-2013Textiles -Tests for color fastness - Part E04: Color fastness to perspiration ISO105-E04:2013;BS EN ISO105-E04: 2013;EN ISO105-E04: 2013;DIN EN ISO105-E04: 2013
13 Color fastness to perspiration
Color fastness to perspiration AATCC 15-2013
Textiles-Tests for color fastness- Color fastness to domestic and commercial laundering GB/T 12490-2014
14 Color fastness to washing Textiles -- Tests for color fastness -- Part C06: Color fastness to to domestic
and commercial laundering ISO 105-C06:2010;BS EN ISO 105-C06:2010;DIN EN ISO 105-C06: 2010;EN ISO 105-C06: 2010
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 33 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Colorfastness to Laundering: Accelerated AATCC 61-2013
15 Color fastness to transfer in joints
Textiles-Test for color fastness-Color fastness to transfer in joints GB/T 31127-2014
Accredited only for method A
Test method for identification of textile fibers-Part 1:General introduction FZ/T 01057.1-2007Test method for identification of textile fibers-Part 2:Burning behavior FZ/T 01057.2-2007Test method for identification of textile fibers-Part 3:Microscopy FZ/T 01057.3-2007Test method for identification of textile fibers-Part 4:Solubility FZ/T 01057.4-2007
16 Fiber analysis Qualitative
Fiber Analysis: Qualitative AATCC 20- 2013
Accredited only for :Visual and Microscopical Examination, Burning Test, Solubility Test.
Textiles - Quantitative chemical analysis - Part 1: General principles of testing GB/T 2910.1-2009Textiles - Quantitative chemical analysis - Part 2: Ternary fibre mixture GB/T 2910.2-200917 Fiber analysis
Quantitative Textiles - Quantitative chemical analysis - Part 3: Mixtures of acetate and certain other fibres (method using acetone) GB/T 2910.3-2009
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 34 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Textiles - Quantitative chemical analysis - Part 4: Mixtures of certain protein and certain other fibers (method using hypochlorite) GB/T 2910.4-2009Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) GB/T 2910.6-2009Textiles - Quantitative chemical analysis - Part 7: Mixtures of polyamide and certain other fibres (method using formic acid) GB/T 2910.7-2009Textiles - Quantitative chemical analysis - Part 8: Mixtures of acetate and triacetate fibres (method using acetone) GB/T 2910.8-2009Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) GB/T 2910.10-2009Textiles - Quantitative chemical analysis - Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) GB/T 2910.11-2009Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain modacrcylic, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide ) GB/T 2910.12-2009Textiles - Quantitative chemical analysis - Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) GB/T 2910.14-2009Textiles - Quantitative chemical analysis - Part 16: Mixtures of polypropylene and certain other fibres (method using xylene) GB/T 2910.16-2009Textiles - Quantitative chemical analysis - Part 17: Mixtures of chlorofibers (homopolymers of vinyl chloride) and certain other fibers (method using sulfuric acid) GB/T 2910.17-2009
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 35 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Textiles - Quantitative chemical analysis - Part 18: Mixtures of silk and wool or hair (method using sulfuric acid) GB/T 2910.18-2009Textiles - Quantitative chemical analysis - Part 20:Mixture of elastane and some other fibers (method of using dimethylacetamide) GB/T 2910.20-2009Textiles - Quantitative chemical analysis - Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax of ramie fibres (method using formic acid and zinc chloride) GB/T 2910.22-2009Textiles—Quantitative chemical analysis—Quaternary fibre mixtures FZ/T 01026-2009
Textile-Test method of elastane fibre content FZ/T 01095-2002
Textiles -- Quantitative chemical analysis Part 1: General principals of testing ISO 1833-1:2006/Cor1: 2009Textiles -- Quantitative chemical analysis Part 2: Ternary fiber mixtures ISO 1833-2:2006Textiles -- Quantitative chemical analysis Part 3: Mixtures of acetate and certain other fibers (Method using acetone) ISO 1833-3:2006Textiles -- Quantitative chemical analysis -- Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite) ISO 1833-4:2006Textiles -- Quantitative chemical analysis Part 7: Mixtures of polyamide and certain other fibers (Method using formic acid) ISO 1833-7:2006Textiles -- Quantitative chemical analysis -- Part 8: Mixtures of acetate and triacetate fibres (method using acetone) ISO 1833-8:2006Textiles -- Quantitative chemical analysis Part 10: Mixtures of triacetate or polylactide and certain other fibers (Method using dichloromethane) ISO 1833-10:2006Textiles -- Quantitative chemical analysis Part 11: Mixtures of cellulose and polyester fibres (Method using sulfuric acid) ISO 1833-11:2006Textiles -- Quantitative chemical analysis Part 12: Mixtures of acrylic, certain modacrylics,certain chlorofibres, certain elastanes and certain other fibres
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 36 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
(Method using dimethylformamide) ISO 1833-12:2006
Textiles -Quantitative chemical analysis- Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) ISO 1833-14:2006Textiles-Quantitative chemical analysis - Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene) ISO 1833-16:2006Textiles-Quantitative chemical analysis-Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) ISO 1833-17:2006Textiles -Quantitative chemical analysis Part 18: Mixtures of silk and wool or hair (Method using sulfuric acid) ISO 1833-18:2006Textiles - Quantitative chemical analysis - Part 20:Mixtures of elastane and certain other fibres (method using dimethylacetamide) ISO 1833.20:2009Textiles - Quantitative chemical analysis - Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride) ISO 1833.22:2013
Fiber composition of textile products Regulation (EU) No. 1007/2011
Except for:method using benzyl alcohol,method using 55,5 /44,5% v/v mixture of carbon disulfide and acetone,method by
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 37 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
determining nitrogen content,method using cyclohexanone
Fiber Analysis: Quantitative AATCC 20A-2014
Except for:Microscopical Analysis
Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde(water extraction method) GB/T 2912.1-2009Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method) GB/T 2912.2-2009Textiles-Determination of formaldehyde-Part1:Free and hydrolyzed formaldehyde (water extraction method) ISO 14184-1:2011 EN ISO 14184-1:2011 BS EN ISO 14184-1:2011Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method) ISO 14184-2:2011 EN ISO 14184-2:2011 BS EN ISO 14184-2:2011
18 formaldehyde content
Formaldehyde Release from Fabric, Determination of: Sealed Jar Method AATCC 112-2014
Textiles - Determination of pH of aqueous extract GB/T 7573-2009
Textiles -- Determination of pH of aqueous extract ISO 3071:2005 EN ISO 3071:2006 BS EN ISO 3071:200619 pH Value
pH of the Water-Extract from Wet Processed Textiles AATCC 81-2012
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 38 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Textiles - Determination of the banned azo colourants GB/T 17592-2011
Textiles - Determination of 4-aminoazobenzene GB/T 23344-2009
Textiles. Methods for determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants accessible with and without extracting the fibres EN 14362-1:2012 BS EN14362-1:2012Textiles - Methods for the determination of certain aromatic amines derived from azo colorants - Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene EN 14362-3:2012 BS EN 14362-3:2012
20 AZO Dyes content
Examination of commodities :Determination of certain aromatic amines derived from AZO colorants in textiles 64 LFGB B 82.02-2:2013
21 Disperse dyestuffs content Textiles-Detection of disperse dyestuffs DIN 54231: 2005
22 Total Lead and Total Cadmium content
Textiles-Determination of total content of lead and cadmium GB/T 30157-2013
23 Pentachlorophenol content
Testing of commodities Verification and specification of pentachlorophenol PCP in commodities especially in leather and textiles 64 LFGB B 82.02-8:2001
24 Textiles and garments use instruction
Instructions for use of products of consumer interest - Part 4: Textiles and apparel GB 5296.4-2012
25 Textile products fiber identification
Textiles- Indentification of fiber content GB/T 29862-2013Textiles--Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change GB/T 8628-20132 Textiles 1 Dimensional StabilityTextiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 39 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
ISO 3759:2011;BS EN ISO 3759:2011;DIN EN ISO 3759:2011;EN ISO 3759:2011Textiles -Domestic washing and drying procedures for textile testing GB/T 8629-2001Textiles -- Domestic washing and drying procedures for textile testing ISO 6330:2012;BS EN ISO 6330:2012;DIN EN ISO 6330:2012;EN ISO 6330:2012Determination of Dimensional Change in Washing and Drying GB/T 8630-2013Textiles-Determination of Dimensional Change in Washing and Drying ISO 5077:2007;BS EN ISO 5077:2008;EN ISO 5077:2008;DIN EN ISO 5077:2008Test method for relaxation dimensional change and felting dimesional change to washing of wool textiles FZ/T 70009-2012Textiles - Determination of spirality after laundering - Part 2: Woven and knitted fabrics GB/T 23319.2-20092 Spirality after
laundering Textiles—Determination of spirality after laundering—Part 3:Woven and knitted garments GB/T 23319.3-2010
Textiles - Fabrics - Determination of width and length GB/T 4666-2009
Textiles -- Woven fabrics -- Measurement of width of pieces ISO 22198:2006Textiles - Fabrics - Determination of width and length BS EN 1773:1997;EN 1773:1996Standard Test Methods for Width of Textile Fabric ASTM D3774- 96(2016)
3 Width of Textile Fabric
Standard Specification for Tolerances for Knitted Fabrics ASTM D3887-96 (2008)
4 Tensile properties Textiles—Tensile properties of fabrics—Part 1:Determination of maximum force and elongation at maximum force using the strip method GB/T 3923.1-
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 40 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
2013
Textiles—Tensile properties of fabrics—Part 2:Determination of maximum force using the grab method GB/T 3923.2-2013Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method ISO 13934-1:2013BS EN ISO13934-1:2013DIN EN ISO13934-1:2013EN ISO13934-1:2013Textiles- Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method ISO 13934-2:2014;EN ISO 13934-2:2014;BS EN ISO 13934-2:2014;DIN EN ISO 13934-2:2014Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) ASTM D 5035-11(2015)Standard Test Method for Breaking Force and Elongation of Textile Fabrics(Grab Method) ASTM D 5034-09(2017)Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) GB/T 3917.1-2009Textiles-Tear properties of fabrics- Part 2 :Determination of tear force of trouser-shaped test specimens(Single tear method) GB/T 3917.2-2009Textiles -Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) ISO 13937-1:2000+C1:2004;EN ISO 13937-1:2000+AC: 2006;BS EN ISO 13937-1:2000;DIN EN ISO 13937-1:2000Textiles - Tear properties of fabrics -Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) ISO 13937-2:2000;EN ISO 13937-2:2000;BS EN ISO 13937-2:2000;DIN EN ISO 13937-2:2000
5 Tear properties
Standard Test Method for Tearing strength of Fabrics by Falling - Pendulum Type (Elmendorf-Type) Apparatus
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 41 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
ASTM D 1424-2013
Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine) ASTM D 2261-13(2017)Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method GB/T 13773.1-2008Textiles-seam tensile properties of fabrics and made-up textile articles-Part 2:Determination of maximum force to seam rupture using the grab method GB/T 13773.2-2008Textiles- Determination of the slippage resistance of yarns at a seam in woven fabrics- Part 1: Fixed seam opening method GB/T 13772.1-2008Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method GB/T 13772.2-2008Textiles-seam tensile properties of fabrics and made-up textile articles-Part 2:Determination of maximum force to seam rupture using the grab method ISO 13935-2:2014;EN ISO 13935-2:2014;BS EN ISO 13935-2:2014;DIN EN ISO 13935-2:2014Textiles- Determination of the slippage resistance of yarns at a seam in woven fabrics- Part 1: Fixed seam opening method ISO 13936-1:2004;EN ISO 13936-1:2004;BS EN ISO 13936-1:2004;DIN EN ISO 13936-1:2004Textiles- Determination of the slippage resistance of yarns at a seam in woven fabrics- Part 2: Fixed load method ISO 13936-2:2004
6 Seam properties
Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics ASTM D1683/D1683M-17e1
7 Fabric weight Textiles--Woven fabrics --Determination of mass per unit length and mass per unit area GB/T 4669-2008
Accredited only for
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 42 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
method 5 and method 6
Textiles-Woven fabrics- Determination of mass per unit length and mass per unit area ISO 3801:1977
Accredited only for method 5
Textiles-Woven fabrics- Determination of mass per unit length and mass per unit area BS 2471:2005
Standard Test Methods for Mass Per Unit Area (Weight) of Fabric ASTM D 3776 / D3776M -09a(2017)
Accredited only for method C
Textiles-Fabrics- Determination of mass per unit area using small samples BS EN 12127:1998 EN 12127:1997Textiles- Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method GB/T 4802.2-2008Textiles- Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method ISO 12945-2:2000;EN ISO 12945-2:2000;BS EN ISO 12945-2:2000;DIN EN ISO 12945-2:2000
8 Pilling Resistance
Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textiles Fabrics: Martindale Tester ASTM D4970/D4970M-16e2Textiles-Determination of the abrasion resistance of fabrics by the Martindale method-Part 2: Determination of specimen breakdown GB/T 21196.2-2007Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss GB/T 21196.3-2007
9 Abrasion Resistance
Textiles—Determination of the abrasion resistance of fabrics by the Martindale metod—Part 4:Assessment of appearance change GB/T 21196.4-
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 43 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
2007
Textiles-Determination of the abrasion resistance of fabrics by the Martindale method-Part 2: Determination of specimen breakdown ISO 12947-2:2016;BS EN ISO 12947-2: 2016;DIN EN ISO 12947-2:2017; EN ISO 12947-2:2016Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method) ASTM D 4966-2012Textiles - Testing and evaluation for water resistance - Spray test method GB/T 4745-2012Textile fabrics-Determination of resistance to surface wetting (spray test) ISO 4920:2012;BS EN ISO 4920:2012;DIN EN 4920:2012;EN 4920:2012;10 Water repellency
Water Repellency: Spray Test AATCC 22-2014
Textiles -- Tests for color fastness -Color fastness to rubbing GB/T 3920-2008Textiles - Tests for color fastness- Part X12: Color fastness to rubbing ISO 105-X12: 2016;BS EN ISO 105- X12:2016;DIN EN ISO 105- X12: 2016;EN ISO 105- X12: 2016
11 Color fastness to rubbing
Colorfastness to Crocking: AATCC Crockmeter Method AATCC 8:2016
Textiles--Tests for color fastness--Color fastness to water GB/T 5713-2013Textiles -- Tests for color fastness -- Part E01: Color fastness to water ISO 105-E01: 2013 EN ISO 105-E01: 2013 BS EN ISO 105-E01: 2013 DIN EN ISO 105-E01: 2013
12 Color fastness to water
Colorfastness to Water AATCC 107-2013
13 Color fastness to perspiration
Textiles-Tests for color fastness- Color fastness to perspiration GB/T 3922-2013
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 44 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Textiles -Tests for color fastness - Part E04: Color fastness to perspiration ISO105-E04:2013;BS EN ISO105-E04: 2013;EN ISO105-E04: 2013;DIN EN ISO105-E04: 2013
Color fastness to perspiration AATCC 15-2013
Textiles-Tests for color fastness- Color fastness to domestic and commercial laundering GB/T 12490-2014Textiles -- Tests for color fastness -- Part C06: Color fastness to to domestic and commercial laundering ISO 105-C06:2010;BS EN ISO 105-C06:2010;DIN EN ISO 105-C06: 2010;EN ISO 105-C06: 2010
14 Color fastness to washing
Colorfastness to Laundering: Accelerated AATCC 61-2013
15 Color fastness to transfer in joints
Textiles-Test for color fastness-Color fastness to transfer in joints GB/T 31127-2014
Accredited only for method A
Test method for identification of textile fibers-Part 1:General introduction FZ/T 01057.1-2007Test method for identification of textile fibers-Part 2:Burning behavior FZ/T 01057.2-2007Test method for identification of textile fibers-Part 3:Microscopy FZ/T 01057.3-2007Test method for identification of textile fibers-Part 4:Solubility FZ/T 01057.4-200716 Fiber analysis
Qualitative
Fiber Analysis: Qualitative AATCC 20- 2013
Accredited only for :Visual and Microscopical Examination, Burning Test,
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 45 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Solubility Test.
Textiles - Quantitative chemical analysis - Part 1: General principles of testing GB/T 2910.1-2009Textiles - Quantitative chemical analysis - Part 2: Ternary fibre mixture GB/T 2910.2-2009Textiles - Quantitative chemical analysis - Part 3: Mixtures of acetate and certain other fibres (method using acetone) GB/T 2910.3-2009Textiles - Quantitative chemical analysis - Part 4: Mixtures of certain protein and certain other fibers (method using hypochlorite) GB/T 2910.4-2009Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) GB/T 2910.6-2009Textiles - Quantitative chemical analysis - Part 7: Mixtures of polyamide and certain other fibres (method using formic acid) GB/T 2910.7-2009Textiles - Quantitative chemical analysis - Part 8: Mixtures of acetate and triacetate fibres (method using acetone) GB/T 2910.8-2009Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) GB/T 2910.10-2009Textiles - Quantitative chemical analysis - Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) GB/T 2910.11-2009
17 Fiber analysis Quantitative
Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain modacrcylic, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide ) GB/T 2910.12-2009
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 46 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Textiles - Quantitative chemical analysis - Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) GB/T 2910.14-2009Textiles - Quantitative chemical analysis - Part 16: Mixtures of polypropylene and certain other fibres (method using xylene) GB/T 2910.16-2009Textiles - Quantitative chemical analysis - Part 17: Mixtures of chlorofibers (homopolymers of vinyl chloride) and certain other fibers (method using sulfuric acid) GB/T 2910.17-2009Textiles - Quantitative chemical analysis - Part 18: Mixtures of silk and wool or hair (method using sulfuric acid) GB/T 2910.18-2009Textiles - Quantitative chemical analysis - Part 20:Mixture of elastane and some other fibers (method of using dimethylacetamide) GB/T 2910.20-2009Textiles - Quantitative chemical analysis - Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax of ramie fibres (method using formic acid and zinc chloride) GB/T 2910.22-2009Textiles—Quantitative chemical analysis—Quaternary fibre mixtures FZ/T 01026-2017
Textile-Test method of elastane fibre content FZ/T 01095-2002
Textiles -- Quantitative chemical analysis Part 1: General principals of testing ISO 1833-1:2006/Cor1: 2009Textiles -- Quantitative chemical analysis Part 2: Ternary fiber mixtures ISO 1833-2:2006Textiles -- Quantitative chemical analysis Part 3: Mixtures of acetate and certain other fibers (Method using acetone) ISO 1833-3:2006Textiles -- Quantitative chemical analysis -- Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite) ISO 1833-4:2017Textiles -- Quantitative chemical analysis Part 7: Mixtures of polyamide and certain other fibers (Method using formic acid) ISO 1833-7:2017
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 47 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Textiles -- Quantitative chemical analysis -- Part 8: Mixtures of acetate and triacetate fibres (method using acetone) ISO 1833-8:2006Textiles -- Quantitative chemical analysis Part 10: Mixtures of triacetate or polylactide and certain other fibers (Method using dichloromethane) ISO 1833-10:2006Textiles -- Quantitative chemical analysis Part 11: Mixtures of cellulose and polyester fibres (Method using sulfuric acid) ISO 1833-11:2017Textiles -- Quantitative chemical analysis Part 12: Mixtures of acrylic, certain modacrylics,certain chlorofibres, certain elastanes and certain other fibres (Method using dimethylformamide) ISO 1833-12:2006Textiles -Quantitative chemical analysis- Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) ISO 1833-14:2006Textiles-Quantitative chemical analysis - Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene) ISO 1833-16:2006Textiles-Quantitative chemical analysis-Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) ISO 1833-17:2006Textiles -Quantitative chemical analysis Part 18: Mixtures of silk and wool or hair (Method using sulfuric acid) ISO 1833-18:2006Textiles - Quantitative chemical analysis - Part 20:Mixtures of elastane and certain other fibres (method using dimethylacetamide) ISO 1833.20:2009Textiles - Quantitative chemical analysis - Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride) ISO 1833.22:2013
Fiber composition of textile products Regulation (EU) No. 1007/2011
Except for:method using benzyl alcohol,method
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 48 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
using 55,5 /44,5% v/v mixture of carbon disulfide and acetone,method by determining nitrogen content,method using cyclohexanone
Fiber Analysis: Quantitative AATCC 20A-2015
Except for:Microscopical Analysis
Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde(water extraction method) GB/T 2912.1-2009Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method) GB/T 2912.2-2009Textiles-Determination of formaldehyde-Part1:Free and hydrolyzed formaldehyde (water extraction method) ISO 14184-1:2011 EN ISO 14184-1:2011 BS EN ISO 14184-1:2011
18 formaldehyde content
Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method) ISO 14184-2:2011 EN ISO 14184-2:2011 BS EN ISO 14184-2:2011
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 49 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Formaldehyde Release from Fabric, Determination of: Sealed Jar Method AATCC 112-2014
Textiles - Determination of pH of aqueous extract GB/T 7573-2009
Textiles -- Determination of pH of aqueous extract ISO 3071:2005 EN ISO 3071:2006 BS EN ISO 3071:200619 pH Value
pH of the Water-Extract from Wet Processed Textiles AATCC TM 81-2016
Textiles - Determination of the banned azo colourants GB/T 17592-2011
Textiles - Determination of 4-aminoazobenzene GB/T 23344-2009
Textiles. Methods for determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants accessible with and without extracting the fibres ISO 14362-1:2017 EN ISO14362-1:2017 BS EN ISO 14362-1:2017Textiles - Methods for the determination of certain aromatic amines derived from azo colorants - Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene ISO 14362-3 :2017 EN ISO14362-3:2017 BS EN ISO 14362-3:2017
20 AZO Dyes content
Examination of commodities :Determination of certain aromatic amines derived from AZO colorants in textiles 64 LFGB B 82.02-2:2013
21 Disperse dyestuffs content Textiles-Detection of disperse dyestuffs DIN 54231: 2005
22 Total Lead and Total Cadmium content
Textiles-Determination of total content of lead and cadmium GB/T 30157-2013
23 Pentachlorophenol content
Testing of commodities Verification and specification of pentachlorophenol PCP in commodities especially in leather and textiles 64 LFGB B 82.02-8:2001
24 Textiles and garments use instruction
Instructions for use of products of consumer interest - Part 4: Textiles and apparel GB/T 5296.4-2012
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 50 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
25 Textile products fiber identification
Textiles- Indentification of fiber content GB/T 29862-2013
三、Leather
Leather-Chemical test-Determination of pH QB/T 2724-20051 pH Value Leather -- Chemical tests -- Determination of pH ISO 4045: 2008 EN
ISO 4045:2008 BS EN ISO 4045:2008Leather and fur-Chemical tests-Determination of formaldehyde content GB/T 19941-2005
2 Formaldehyde content Leather -- Chemical determination of formaldehyde content -- Part 1: Method using high performance liquid chromatography ISO 17226-1:2008EN ISO 17226-1:2008BS EN ISO 17226-1:2008DIN EN ISO 17226-1:2008
Leather and fur-Chemical tests-Determination of banned azo colourants GB/T 19942-2005
Except for:HPCE、TLC
Leather -- Chemical tests for the determination of certain azo colorants in dyed leathers -- Part 1: Determination of certain aromatic amines derived from azo colourants ISO 17234-1:2015 EN ISO 17234-1:2015 BS EN ISO 17234-1:2015Leather – chemical tests for the determination of certain azo colorants in dyed leathersPart 2: determination of 4-aminoazobenzene ISO 17234-2:2011 EN ISO 17234-2:2011Examination of commodities :Determination of certain aromatic amines derived from AZO colorants in Leather 64 LFGB B 82.02-3:2014
3 AZO Dyes content
Examination of commodities: Determination of 4-aminoazobenzene 64 LFGB B 82.02-9:2014
1 Leather
4 Chromium(VI) content
Leather -- Chemical tests -- Determination of chromium(VI) content ISO 17075:2007 EN ISO 17075:2007 BS EN ISO 17075:2007
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 51 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
5 Pentachlorophenol content
Testing of commodities Verification and specification of pentachlorophenol PCP in commodities especially in leather and textiles (reference procedure) 64 LFGB B 82.02-8:2001
6
Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content
Leather -- Chemical tests -- Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content ISO 17070:2015 EN ISO 17070:2015 BS EN ISO 17070:2015
Leather-Chemical test-Determination of pH QB/T 2724-20051 pH Value Leather -- Chemical tests -- Determination of pH ISO 4045: 2008 EN
ISO 4045:2008 BS EN ISO 4045:2008Leather and fur-Chemical tests-Determination of formaldehyde content GB/T 19941-2005
2 Formaldehyde content Leather -- Chemical determination of formaldehyde content -- Part 1: Method using high performance liquid chromatography ISO 17226-1:2008EN ISO 17226-1:2008BS EN ISO 17226-1:2008DIN EN ISO 17226-1:2008
Leather and fur-Chemical tests-Determination of banned azo colourants GB/T 19942-2005
Except for:HPCE、TLC
Leather -- Chemical tests for the determination of certain azo colorants in dyed leathers -- Part 1: Determination of certain aromatic amines derived from azo colourants ISO 17234-1:2015 EN ISO 17234-1:2015 BS EN ISO 17234-1:2015
2 Leather
3 AZO Dyes content
Leather – chemical tests for the determination of certain azo colorants in dyed leathersPart 2: determination of 4-aminoazobenzene ISO 17234-2:2011 EN ISO 17234-2:2011
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 52 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Examination of commodities :Determination of certain aromatic amines derived from AZO colorants in Leather 64 LFGB B 82.02-3:2014Examination of commodities: Determination of 4-aminoazobenzene 64 LFGB B 82.02-9:2014
4 Chromium(VI) content
Leather -- Chemical tests -- Determination of chromium(VI)- Part 1:Colorimetric method content ISO 17075-1:2017;EN ISO 17075-1:2017;BS EN ISO 17075-1:2017
5 Pentachlorophenol content
Testing of commodities Verification and specification of pentachlorophenol PCP in commodities especially in leather and textiles (reference procedure) 64 LFGB B 82.02-8:2001
6
Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content
Leather -- Chemical tests -- Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content ISO 17070:2015 EN ISO 17070:2015 BS EN ISO 17070:2015
四、Environmental Management hazardous substances in electronic and electronically production
Acid digestion of sediments, sludges, and soils EPA 3050B:1996
Microwave Assisted Acid Digestion of Siliceous and Organically Based Matrices EPA 3052:19961 Total Lead and Total
Cadmium content
Inductively coupled plasma-atomic emission spectrometry EPA 6010D: 2014
2 Total Cadmium content
Plastics – Determination of cadmium – Wet decomposition method EN 1122:2001 BS EN1122:2001
Accredited Only for Method B
1
Environmental Management hazardous substances in electronic and electronically production
3 PAHs content Prüfung und Bewertung von Polyzyklischen Aromatischen
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 53 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Kohlenwasserstoffen (PAK) bei der Zuerkennung des GS-Zeichens AfPS GS 2014:01 PAKDetermination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry IEC 62321-3-1:20134
Lead, mercury, cadmium, total chromium and total bromine
Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry ASTM F2617-15:2008
Determination of certain substances in electrotechnical products –Part 4: Mercury in polymers, metals and electronicsby CV-AAS, CV-AFS, ICP-OES and ICP-MS IEC 62321-4:2013
Accredited Only for ICP-OES and ICP-MS method
Double-capped fluorescent lamps-Performance specifications Part3: Procedure for quantitative analysis of mercury present in fluorescent lamps AS/NZS 4782.3:2014
Accredited Only for ICP-OES5 Mercury content
Determination of certain substances in electrotechnical products –Part 5: Cadmium, lead and chromium in polymers and electronics and cadmiumand lead in metals by AAS, AFS, ICP-OES and ICP-MS IEC 62321-5:2013
Accredited only for: AAS,ICP-OES and ICP-MS method
6 Hexavalent chromium
Determination of certain substances in electrotechnical products-Part 7-1: Hexavalent chromium-Presence of hexavalent chromium (Cr(VI) in colourless and coloured corrosion-protected coatings on metals by the colorimetric method IEC 62321-7-1:2015
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 54 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods ISO 3613:2010;EN ISO 3613:2010;BS EN ISO 3613:2010Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) IEC 62321:2008
7
Lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers content
Electrical and electronic products - Determination of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) GB/T 26125-2011
8
Polybrominated biphenyls & Polybrominated diphenyl ethers
Determination of certain substances in electrotechnical products - Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatograhy -mass spectometry (GC-MS) IEC 62321-6:2015
Characterization of waste-Halogen and sulfur content-Oxygen combustion in closed systems and determination methods EN 14582:20169
Halogen (fluorine, chlorine, bromine, iodine) content Determination of inorganic anions by ion chromatography EPA 9056A:2007
Acid digestion of sediments, sludges, and soils EPA 3050B:1996
Microwave Assisted Acid Digestion of Siliceous and Organically Based Matrices EPA 3052:19961 Total Lead and Total
Cadmium content
Inductively coupled plasma-atomic emission spectrometry EPA 6010D: 20142
Environmental Management hazardous substances in electronic and electronically production 2 Total Cadmium
content
Plastics – Determination of cadmium – Wet decomposition method EN 1122:2001 BS EN1122:2001
Accredited Only for Method B
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 55 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
3 PAHs contentPrüfung und Bewertung von Polyzyklischen Aromatischen Kohlenwasserstoffen (PAK) bei der Zuerkennung des GS-Zeichens AfPS GS 2014:01 PAKDetermination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry IEC 62321-3-1:20134
Lead, mercury, cadmium, total chromium and total bromine
Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry ASTM F2617-15:2008
Determination of certain substances in electrotechnical products –Part 4: Mercury in polymers, metals and electronicsby CV-AAS, CV-AFS, ICP-OES and ICP-MS IEC 62321-4:2013
Accredited Only for ICP-OES and ICP-MS method
Double-capped fluorescent lamps-Performance specifications Part3: Procedure for quantitative analysis of mercury present in fluorescent lamps AS/NZS 4782.3:2014
Accredited Only for ICP-OES5 Mercury content
Determination of certain substances in electrotechnical products –Part 5: Cadmium, lead and chromium in polymers and electronics and cadmiumand lead in metals by AAS, AFS, ICP-OES and ICP-MS IEC 62321-5:2013
Accredited only for: AAS,ICP-OES and ICP-MS method
6 Hexavalent chromium
Determination of certain substances in electrotechnical products-Part 7-1: Hexavalent chromium-Presence of hexavalent chromium (Cr(VI) in colourless and coloured corrosion-protected coatings on metals by the colorimetric method IEC 62321-7-1:2015
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 56 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods ISO 3613:2010;EN ISO 3613:2010;BS EN ISO 3613:2010Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) IEC 62321:2008
7
Lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers content
Electrical and electronic products - Determination of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) GB/T 26125-2011
8
Polybrominated biphenyls & Polybrominated diphenyl ethers
Determination of certain substances in electrotechnical products - Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatograhy -mass spectometry (GC-MS) IEC 62321-6:2015
Characterization of waste-Halogen and sulfur content-Oxygen combustion in closed systems and determination methods EN 14582:20169
Halogen (fluorine, chlorine, bromine, iodine) content Determination of inorganic anions by ion chromatography EPA 9056A:2007
Packaging materials, containers and transport packaging
1
Packaging materials, containers and transport packaging
1 Lead, cadmium, mercury, chromium Acid digestion of sediments, sludge and soils EPA 3050B:1996
五、Silicon and organic material, sediments, sewage sludge and soil
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 57 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
1
Packaging materials, containers and transport packaging
1 Lead, cadmium, mercury, chromium Acid digestion of sediments, sludge and soils EPA 3050B:1996
Packaging materials, containers and transport packaging
1
Packaging materials, containers and transport packaging
1 Lead, cadmium, mercury, chromium
Microwave assisted acid digestion of siliceous and organically based matrices EPA 3052:1996
五、Silicon and organic material, sediments, sewage sludge and soil
1
Packaging materials, containers and transport packaging
1 Lead, cadmium, mercury, chromium
Microwave assisted acid digestion of siliceous and organically based matrices EPA 3052:1996
Packaging materials, containers and transport packaging
1
Packaging materials, containers and transport packaging
1 Lead, cadmium, mercury, chromium
Inductively coupled plasma-atomic emissioon spectrometry EPA 6010D: 2014
五、Silicon and organic material, sediments, sewage sludge and soil
1Packaging materials, containers and
1 Lead, cadmium, mercury, chromium
Inductively coupled plasma-atomic emissioon spectrometry EPA 6010D: 2014
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 58 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
transport packaging
Packaging materials, containers and transport packaging
1
Packaging materials, containers and transport packaging
2 Hexavalent chromium Alkaline digestion method for hexavalent chromium EPA 3060A:1996
五、Silicon and organic material, sediments, sewage sludge and soil
1
Packaging materials, containers and transport packaging
2 Hexavalent chromium Alkaline digestion method for hexavalent chromium EPA 3060A:1996
Packaging materials, containers and transport packaging
1
Packaging materials, containers and transport packaging
2 Hexavalent chromium Chromium hexavalent(Colorimetric) EPA 7196A:1992
五、Silicon and organic material, sediments, sewage sludge and soil
1
Packaging materials, containers and transport packaging
2 Hexavalent chromium Chromium hexavalent(Colorimetric) EPA 7196A:1992
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 59 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
六、Wood based panels and products
1 Formaldehyde releaseWood–based panels – Determination of formaldehyde release Part 3 - Formaldehyde release by the flask method EN 717-3: 1996BS EN 717-3: 19961
Wood based panels and products 2 Formaldehyde content Wood-based panels - Determination of formaldehyde release - Part 5:
Extraction method (called the perforator method) ISO 12460-5 2016
1 Formaldehyde releaseWood–based panels – Determination of formaldehyde release Part 3 - Formaldehyde release by the flask method EN 717-3: 1996BS EN 717-3: 19962
Wood based panels and products 2 Formaldehyde content Wood-based panels - Determination of formaldehyde release - Part 5:
Extraction method (called the perforator method) ISO 12460-5 2016
七、Food contact material and containers
Method for analysis of hygienic standard of ceramics for food containers GB/T 5009.62-2003
Accredited only forAAS method
Standard permissible limits and testing method for release of lead or cadmium from ceramic cookware GB 8058-2003Standard testing methods for lead and cadmium release from domestic ceramic GB/T 3534-2002Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food – Release of lead and cadmium - Part 1: Test mothod; ISO 6486-1:1999Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels ASTM C927-80 (2014)
1Food contact material and containers
1 Leachable lead and cadmium
Materials and articles in contact with foodstuffs - Silicate surfaces - Part 1: Determination of the release of lead and cadmium from ceramic ware; EN 1388-1:1995BS EN 1388-1:1996
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 60 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Materials and articles in contact with foodstuffs – Silicate surfaces – Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware EN 1388-2: 1995BS EN1388-2: 1996Plastics. Melamine-formaldehyde mouldings. Determination of extractable formaldehyde ISO 4614:2000 EN ISO 4614:2000 BS EN ISO 4614:2000Paper and board intended to come into contact with foodstuffs - Preparation of a cold water extract EN 645:1993BS EN 645:1994Paper and board intended to come into contact with foodstuffs - Preparation of a hot water extract EN 647:1993BS EN 647:1994
2 Formaldehyde
Paper and board intended to come into contact with foodstuffs - Determination of formaldehyde in an aqueous extract EN 1541:2001BS EN 1541:2001DIN EN1541:2001National Food Safety Standard Method for analysis of overall migration for food contact materials and articles GB 31604.8-2016Materials and articles in contact with foodstuffs- Plastics-Part 3: Test methods for overall migration into aqueous food simulants by total immersion EN 1186-3: 2002Materials and articles in contact with foodstuffs- Plastics-Part 3: Test methods for overall migration into aqueous food simulants by total immersion BS EN 1186-3: 2002
3 Overall migration
Materials and articles in contact with foodstuffs. Plastics. - Part 9: Test methods for overall migration into aqueous food simulants by article filling EN 1186-9: 2002
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 61 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Materials and articles in contact with foodstuffs. Plastics. - Part 9: Test methods for overall migration into aqueous food simulants by article filling BS EN 1186-9: 2002Materials and articles in contact with foodstuffs. Plastics. - Part 14: Test methods for 'substitute tests' for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95% ethanol EN 1186-14: 2002Materials and articles in contact with foodstuffs. Plastics. - Part 14: Test methods for 'substitute tests' for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95% ethanol BS EN 1186-14: 2002Materials and articles in contact with foodstuffs-Plastic-part 5 Test method for overall migration into aqueous food simulants by cell EN 1186-5:2002BS EN 1186-5:2002
4 Mechanical and physical properties
Materials and articles in contact with foodstuffs- Test methods for thermal shock and thermal shock endurance EN 1183:1997 BS EN 1183:1997
Except for clause: 6.1 Method A
5 The resistance to microwave heating
Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastic cookware EN 15284:2007BS EN 15284:2007Materials and articles in contact with foodstuffs – Plastics substances subject to limitation - Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastics and the selection of conditions of exposure to food Simulants EN13130-1:2004
6Specific migration of Ba,Co,Cu,Fe, Li, Mn, Zn content
Inductively coupled plasma-atomic emission spectrometry EPA 6010D: 2014
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 62 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
7 Heavy metal(For lead)
National Food Safety Standard Method for analysis of heavy metal in food simulant for food contact materails and articles GB 31604.9-2016
Accredited only for the first method
8 Loss on drying National Food Safety Standard Method for analysis of loss of drying of resin for food contact materails and articles GB 31604.3-2016
9 AcrylonitrileDetermination of residual acrylonitrile monomer in styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene resins and their products used for foods packaging GB/T 5009.152-2003
Accredited only for the second method
Hygienic analytical method of rubber hose for food use GB/T 5009.79-200310 Zinc Method for analysis of hygienic standard of rubber sheet(ring) for food use
GB/T 5009.64-2003
11 6-caprolactam Determination of 6-caprolactam in nylon 6 resin and its products GB/T 5009.125-2003
12 Styrene monomer Polystyrene and rubber-modified polystyrene FDA 21 CFR 177.1640
Food contact materials - Polymer - Determination of 2,4,6-triamino-1,3,5-triazine(melamine)in food simulants - High performance liquid chromatography GB/T 23296.15-200913 MelamineMaterials and articles in contact with foodstuffs-PlastIcs substances subject to limitation-Part27:Determination of 2.4.6-triamino-1.3.5-triazine in food simulants EN 13130-27:2005
14Consumption of potassium permanganate
National Food Safety Standard Method for analysis of consumption of potassium permanganate for food contact materials and articles GB 31604.2-2016
15 Decolorization test National Food Safety Standard Method for analysis of decolorization test for food contact materials and articles GB 31604.7-2016
16 Lead Hygienic standard for polyethylene terephthalate resin used as food containers
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 63 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
and packaging materials GB 13114-1991
Hygienic standard for polyethylene terephthalate resin used as food containers and packaging materials GB 13114-199117 Antimony Determination of antimony in polyester resin and products for food containers and packaging materials GB/T 5009.101-2003
18 Extracts National food safety standard Method for analysis of extractives of resin for food contact materails and articles GB 31604.5-2016National Food Safety Standard Materials and articles in contact with foodstuffs Determination of cadmium extraction ;National Food Safety Standard Materials and articles in contact with foodstuffs Determination of lead extraction GB 31604.24-2016;GB 31604.34-2016National Food Safety Standard Materials and articles in contact with foodstuffs Determination of cadmium extraction ;National Food Safety Standard Materials and articles in contact with foodstuffs Determination of lead extraction GB 31604.24-2016;GB 31604.34-2016National Food Safety Standard Materials and articles in contact with foodstuffs Determination of cadmium extraction ;National Food Safety Standard Materials and articles in contact with foodstuffs Determination of lead extraction GB 31604.24-2016;GB 31604.34-2016Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food – Release of lead and cadmium - Part 1: Test mothod; ISO 6486-1:1999Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels ASTM C927-80 (2014)
2Food contact material and containers
1 Leachable lead and cadmium
Materials and articles in contact with foodstuffs - Silicate surfaces - Part 1: Determination of the release of lead and cadmium from ceramic ware; EN 1388-1:1995BS EN 1388-1:1996
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 64 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Materials and articles in contact with foodstuffs – Silicate surfaces – Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware EN 1388-2: 1995BS EN1388-2: 1996Plastics. Melamine-formaldehyde mouldings. Determination of extractable formaldehyde ISO 4614:2000 EN ISO 4614:2000 BS EN ISO 4614:2000Paper and board intended to come into contact with foodstuffs - Preparation of a cold water extract EN 645:1993BS EN 645:1994Paper and board intended to come into contact with foodstuffs - Preparation of a hot water extract EN 647:1993BS EN 647:1994
2 Formaldehyde
Paper and board intended to come into contact with foodstuffs - Determination of formaldehyde in an aqueous extract EN 1541:2001BS EN 1541:2001DIN EN1541:2001National Food Safety Standard Method for analysis of overall migration for food contact materials and articles GB 31604.8-2016Materials and articles in contact with foodstuffs- Plastics-Part 3: Test methods for overall migration into aqueous food simulants by total immersion EN 1186-3: 2002Materials and articles in contact with foodstuffs- Plastics-Part 3: Test methods for overall migration into aqueous food simulants by total immersion BS EN 1186-3: 2002
3 Overall migration
Materials and articles in contact with foodstuffs. Plastics. - Part 9: Test methods for overall migration into aqueous food simulants by article filling EN 1186-9: 2002
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 65 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Materials and articles in contact with foodstuffs. Plastics. - Part 9: Test methods for overall migration into aqueous food simulants by article filling BS EN 1186-9: 2002Materials and articles in contact with foodstuffs. Plastics. - Part 14: Test methods for 'substitute tests' for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95% ethanol EN 1186-14: 2002Materials and articles in contact with foodstuffs. Plastics. - Part 14: Test methods for 'substitute tests' for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95% ethanol BS EN 1186-14: 2002Materials and articles in contact with foodstuffs-Plastic-part 5 Test method for overall migration into aqueous food simulants by cell EN 1186-5:2002BS EN 1186-5:2002
4 Mechanical and physical properties
Materials and articles in contact with foodstuffs- Test methods for thermal shock and thermal shock endurance EN 1183:1997 BS EN 1183:1997
Except for clause: 6.1 Method A
5 The resistance to microwave heating
Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastic cookware EN 15284:2007BS EN 15284:2007Materials and articles in contact with foodstuffs – Plastics substances subject to limitation - Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastics and the selection of conditions of exposure to food Simulants EN13130-1:2004
6Specific migration of Ba,Co,Cu,Fe, Li, Mn, Zn content
Inductively coupled plasma-atomic emission spectrometry EPA 6010D: 2014
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 66 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
7 Heavy metal(For lead)
National Food Safety Standard Method for analysis of heavy metal in food simulant for food contact materails and articles GB 31604.9-2016
Accredited only for the first method
8 Loss on drying National Food Safety Standard Method for analysis of loss of drying of resin for food contact materails and articles GB 31604.3-2016
9 AcrylonitrileNational Food Safety Standard Materials and articles in contact with foodstuffs Determination of Acrylonitrilecontent and in food simulants GB 31604.17-2016National Food Safety Standard Materials and articles in contact with foodstuffs Determination of zinc migration GB 31604.42-201610 Zinc National Food Safety Standard Materials and articles in contact with foodstuffs Determination of zinc migration GB 31604.42-2016
11 6-caprolactamNational Food Safety Standard Materials and articles in contact with foodstuffs Determination of 6-caprolactam content and in food simulants GB 31604.19-2016
12 Styrene monomer Polystyrene and rubber-modified polystyrene FDA 21 CFR 177.1640
National Food Safety Standard Materials and articles in contact with foodstuffs Determination of 2.4.6-triamino-1.3.5-triazine in food simulants GB 31604.15-201613 Melamine Materials and articles in contact with foodstuffs-PlastIcs substances subject to limitation-Part27:Determination of 2.4.6-triamino-1.3.5-triazine in food simulants EN 13130-27:2005
14Consumption of potassium permanganate
National Food Safety Standard Method for analysis of consumption of potassium permanganate for food contact materials and articles GB 31604.2-2016
15 Decolorization test National Food Safety Standard Method for analysis of decolorization test for food contact materials and articles GB 31604.7-2016
16 Lead National Food Safety Standard Materials and articles in contact with
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 67 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
foodstuffs Determination of heavy metals in food simulation GB 31604.9-2016Hygienic standard for polyethylene terephthalate resin used as food containers and packaging materials GB 13114-199117 Antimony Determination of antimony in polyester resin and products for food containers and packaging materials GB/T 5009.101-2003
18 Extracts National food safety standard Method for analysis of extractives of resin for food contact materails and articles GB 31604.5-2016
八、Writing and markinginstruments
1 All Parameters Writing and marking instruments-Specification for caps to reduce the risk of asphyxiation ISO 11540:2014
2 Cap size Writing and marking instruments –Part 1: Specification for caps to reduce the risk of asphyxiation BS 7272-1:20081
Writing and markinginstruments
3Size,Security,Inaccessibility,Minimal Protrusion,,Air Flow
Writing and marking instruments –Part 2: Specification for end closures to reduce the risk of asphyxiation BS 7272-2:2008+A1:2014
1 All Parameters Writing and marking instruments-Specification for caps to reduce the risk of asphyxiation ISO 11540:2014
2 Cap size Writing and marking instruments –Part 1: Specification for caps to reduce the risk of asphyxiation BS 7272-1:20082
Writing and markinginstruments
3Size,Security,Inaccessibility,Minimal Protrusion,,Air Flow
Writing and marking instruments –Part 2: Specification for end closures to reduce the risk of asphyxiation BS 7272-2:2008+A1:2014
九、Ceramicware
Test method for the resistance to microwave heating of domestic ceramicware GB/T 27587-20111 Ceramicware 1 Microwave heating Standard Test Method for Determination of “Microwave Safe for Reheating” for Ceramicware ASTM C1607-2012
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 68 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Test method for the resistance to microwave heating of domestic ceramicware GB/T 27587-20112 Ceramicware 1 Microwave heating Standard Test Method for Determination of “Microwave Safe for Reheating” for Ceramicware ASTM C1607-2012
十、Candle and Candle Containers
Candles -- Product safety labels EN 15494:2007(E) BS EN 15494:20071 Safety Labeling Standard Specification for Candle Fire Safety Labeling ASTM F2058-
07(2014)Candles Specification for fire safety EN 15493:2007BS EN 15493:2007
Standard Specification for Fire Safety for Candles ASTM F2417-2016
1Candle and Candle Containers
2 Fire Safety
Standard Specification for Fire Safety for Candle Accessories ASTM F2601-2016
Basic candle QB/T 2119-2007Except for: light stability2
Candle and Candle Containers
1 All ParametersStandard Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers ASTM F2179–14
Candles -- Product safety labels EN 15494:2007(E) BS EN 15494:20071 Safety Labeling Standard Specification for Candle Fire Safety Labeling ASTM F2058-
07(2014)Candles Specification for fire safety EN 15493:2007BS EN 15493:2007
Standard Specification for Fire Safety for Candles ASTM F2417-2016
3Candle and Candle Containers
2 Fire Safety
Standard Specification for Fire Safety for Candle Accessories ASTM F2601-2016
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 69 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Basic candle QB/T 2119-2007Except for: light stability4
Candle and Candle Containers
1 All ParametersStandard Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers ASTM F2179–14
十一、Indoor air
1 Formaldehyde Emission
Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber ASTM D6007-14Indoor air -- Part 11: Determination of the emission of volatile organic compounds from building products and furnishing -- Sampling, storage of samples and preparation of test specimens ISO 16000-11-2006Indoor air -- Part 9: Determination of the emission of volatile organic compounds from building products and furnishing -- Emission test chamber method ISO 16000-9:2006/Cor 1:2007Indoor air -- Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air -- Active sampling method ISO 16000-3-2011Indoor air -- Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID ISO 16000-6-2011Volatile compounds tested method of office furniture systems, components and seat circulated ANSI/BIFMA M7.1-2011Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products ASTM D5116-10
1 Indoor air2 Emission Volatile
components
California department of public health: Standard method for the testing and evaluation of volatile organic chemical emissions from indoor sources using environmental chambers version 1.1
2 Indoor air 1 Formaldehyde Emission
Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber ASTM D6007-14
ISO/IEC 17025 认可证书
No. CNAS L5013
The scope of the accreditation in Chinese remains the definitive version.
第 70 页 共 70 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Indoor air -- Part 11: Determination of the emission of volatile organic compounds from building products and furnishing -- Sampling, storage of samples and preparation of test specimens ISO 16000-11-2006Indoor air -- Part 9: Determination of the emission of volatile organic compounds from building products and furnishing -- Emission test chamber method ISO 16000-9:2006/Cor 1:2007Indoor air -- Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air -- Active sampling method ISO 16000-3-2011Indoor air -- Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID ISO 16000-6-2011Volatile compounds tested method of office furniture systems, components and seat circulated ANSI/BIFMA M7.1-2011Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products ASTM D5116-10
2 Emission Volatile components
California department of public health: Standard method for the testing and evaluation of volatile organic chemical emissions from indoor sources using environmental chambers version 1.1