Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Nail Design Guide
HOLIDAY 2021
THE COLLECTION
PARTYREADY
CND™ HOLIDAY 2021 | PARTY READY | NAIL DESIGN GUIDE 2
SPARKLINGCHAMPAGNE By Mette Steenberg
CND™ SUPPLIES
• CND™ SHELLAC™ Base Coat
• CND™ SHELLAC™ Gel Polish Colors:
• Signature Lipstick
• High Waisted Jeans
• White Button Down
• CND™ SHELLAC™ Top Coat
• CND™ LED Lamp
ART SUPPLIES
• Swarovski CrystalPixies™:
• Cute Mood
• Cosmetic Sponge
• 99% Isopropyl Alcohol
4. Repeat step 3 down the center of the nail using CND™ SHELLAC™ High Waisted Jeans, gently blending the color into Signature Lipstick. Clean the brush before putting it back into the bottle.
5. Apply a third stripe on the right side of the nail using CND™ SHELLAC™ White Button Down, blending the color into High Waisted Jeans. Clean the brush before putting it back into the bottle. Cure using preset button 2S.
6. Repeat steps 3-5 and blend as needed to achieve additional coverage. Cure using preset button 2S.
7. Apply a thin layer of CND™ SHELLAC™ Top Coat. Cure using preset button 3.
8. Apply a second layer of Top Coat. Do not cure.
9. Sprinkle Swarovski CrystalPixies™ embellishments in Cute Mood onto the uncured layer of Top Coat. Cure using preset button 3.
10. Cleanse the nail using a cosmetic sponge moistened with 99% Isopropyl Alcohol to remove top film.
1. P.E.P. the natural nail. (Visit cnd.com for complete CND™ SHELLAC™ Application & Removal Step-by-Steps.)
2. Apply a thin layer of CND™ SHELLAC™ Base Coat. Cure for 10 seconds in the CND™ LED Lamp using preset button 1.
3. Using the brush from the bottle, apply a thin layer of CND™ SHELLAC™ Signature Lipstick on the left side of the nail, covering 1/3 of the nail. Do not cure.
WHITEBUTTON DOWN
HIGH WAISTEDJEANS
SIGNATURELIPSTICK
CND™ HOLIDAY 2021 | PARTY READY | NAIL DESIGN GUIDE 3
DENIMTRENCH By Tamara Di Lullo
CND™ SUPPLIES
• CND™ VINYLUX™ Long Wear Polish Colors:
• Silk Slip Dress
• High Waisted Jeans
• Signature Lipstick
• CND™ VINYLUX™ Long Wear Top Coat
ART SUPPLIES
• Palette
• Striping Brush
• Tartan Stamping
• Plate
• Stamper
• Scraper
Jeans. Allow to dry.
5. Apply CND™ VINYLUX™ Silk Slip Dress to the Tartan-pattern stamping plate. Scrape to remove excess and pick up the pattern with the stamper. Apply the pattern to the nail.
6. Apply CND™ VINYLUX™ Signature Lipstick to the free edge, creating a deep smile line. Repeat for aditional coverage.
7. Apply a layer of CND™ VINYLUX™ Long Wear Top Coat.
1. P.E.P. the natural nail. (Visit cnd.com for a complete CND™ VINYLUX™ Application & Removal Step-by-Step.)
2. Apply a thin layer of CND™ VINYLUX™ Silk Slip Dress to the nail.
3. Dispense a small amount of CND™ VINYLUX™ High Waisted Jeans onto a palette. Using a striping brush, draw the outline of the lower moon.
4. Using the brush from the bottle, fill in the top half of the nail with CND™ VINYLUX™ High Waisted
SIGNATURELIPSTICK
HIGH WAISTEDJEANS
SILKSLIP DRESS
CND™ HOLIDAY 2021 | PARTY READY | NAIL DESIGN GUIDE 4
SOCIALBUBBLE By Winnie Huang
CND™ SUPPLIES
• CND™ SHELLAC™ Base Coat
• CND™ SHELLAC™ Gel Polish Colors:
• White Button Down
• Statement Earrings
• CND™ SHELLAC™ Top Coat
• CND™ LED Lamp
ART SUPPLIES
• Palette
• Cosmetic Sponge
• Tweezers
• Gold Thread
• Wax Pencil
• Gold Bullion
• 99% Isopropyl Alcohol
STATEMENTEARRINGS
WHITEBUTTON DOWN
palette. Dip a cosmetic sponge in CND™ SHELLAC™ Statement Earrings and press over the tip of the nail, blending toward the center to create a gradient effect. Cure for one minute using preset button 2S.
5. Apply a layer of CND™ SHELLAC™ Top Coat. Do not cure.
6. Using tweezers, place gold thread down the center of the nail onto the uncured Top Coat.
7. Dispense gold bullion onto a tray. Use a wax pencil to pick up and place the beads randomly over CND™ SHELLAC™ Statement Earrings. Cure using preset button 3.
8. Apply a second layer of CND™ SHELLAC™ Top Coat to seal and secure. Cure using preset button 3.
9. Cleanse the nail using a cosmetic sponge moistened with 99% Isopropyl Alcohol to remove top film.
1. P.E.P. the natural nail. (Visit cnd.com for a complete CND™ SHELLAC™ Application & Removal Step-by-Step.)
2. Apply a thin layer of CND™ SHELLAC™ Base Coat. Cure for 10 seconds in the CND™ LED Lamp using preset button 1.
3. Apply two thin layer of CND™ SHELLAC™ White Button Down. Cure each layer for one minute using preset button 2S.
4. Dispense a small amount of CND™ SHELLAC™ Statement Earrings onto a
For more inspirational styles visit CND.com
CND, SHELLAC and VINYLUX are trademarks of Creative Nail Design, Inc. © 2021 Creative Nail Design, Inc.
HOLIDAY 2021
THE COLLECTION
PARTYREADY