Upload
others
View
10
Download
0
Embed Size (px)
Citation preview
Ы Ы -- ЫЫ
ияия T T -- N N -- NG NG -- NMN NMN -- NMNa NMNa
SUSPENSIONS T SUSPENSIONS T -- N N -- NG NG -- NMN NMN -- NMNa line NMNa line
2014
T...
N... NG...
NMN… NMNa...
Soleco engineering s.r.l. Via Masaccio, 12 - 20096 Pioltello (Mi) Italy - . +39 02 9244311 . +39 02 92103168
: www.solecosrl.com - : [email protected]
Каталог
20
14 -
rev
.01
2
For the choice of Spring Mounts the following are needed:
1 Static weight of the machine and number of footings. 2 Shape of the supporting base and relative distribution of the load on each footing 3 Frequency in r.p.m. (minimum vibratory rate) will show the frequency to isolate.* 4 Placing of the machine: if... near the sea… subject to the wind... in seismic area… on building covers and…
* Frequency = a Hz / 1 Hz = 60 rpm. In choising the antivibrating it’s important the security of the suspended machine : high deflection will give a perfect insulation of the low frequencies, but in the same time The machine will be very sensitive against exterior forces that maybe will cause a swinging that can damage the hydro-electrical connections. For a correct installation refer to our relative instruction guide or contact our technical department on : 0039 02 92 44 31 209.
choosing antivibrating choosing antivibrating choosing antivibrating spring mountsspring mountsspring mounts
READING THE NOMOGRAPH:
From the intersection of the horizontal line indicating the frequency and the oblique line indicating insulation percentage ( I %) one obtains the point in the band corresponding to the grade of insulation: the abscissa of this point indicates in mm the deflection.
Example of Mount choice: Suppose a refrigerating unit has to be insulated. The unit has a frequency of 540 r.p.m. (9 Hz), 6 footings and on each of them rest 1628 Kg. In order to obtain a 85% insulation a deflection of about 27 mm is required. The load divided by the deflection determines the stiffness of the Mount (elastic constant) “K”= Kg/mm
K = 27 mm (deflection)
1628 Kg (real load) = 60,3 Kg/mm *
* The right antivibrating mount shall be chosen among the ones (reported in the following pages) having the ‘K’ value that best approximates the outcoming 60,3. The installation is correct when all the antivibrating mounts have more or less the same deflection; if the obtained deflection does not achieve the plain setting of the machine, it will be necessary the use of jacks to adjust the level. Please consult the technical guide for a correct installation. Soleco engineering srl is not responsible for the conse-quences due to a non compliance of the installation instructions. К
аталог
20
14 -
rev
.01
:
1 . 2 . 3 : - . * 4 : ... … … / … … …
* = a / 1 = 60 / .
: , ,
, , - .
0039 02 92 44 31 209.
А А / NOMOGRAPHE ц об/
ояц
я %
- In
sula
tion
%
:
, , , (I%), , , .
П име ы и ы: 540 / (9 ),
6 , 1628 К . 85% , 27 . Н , , (
) “K”= /
* , “ "
60,3. , ;
, , .
. Soleco engineering srl .
27 ( ) K =
1628 К ( ) = 60,3 К / *
А ИЧ АЯ Э А ИЧ АЯ А А ( ) STATIC ELASTIC DEFLECTIONS ( mm )
ля ы у и ых
и
Soleco engineering s.r.l. Via Masaccio, 12 - 20096 Pioltello (Mi) Italy - . +39 02 9244311 . +39 02 92103168
: www.solecosrl.com - : [email protected]
The dimensions and the features of the equipments mentioned in this price list can be changed by Soleco engineering s.r.l. without notice.
MODEL
Ве Weight
Kg
K
Kg/mm
. Max static load
Kg
. Max deflection
mm
h
mm
TFr 1 0,20 0,5 16 31
TFr 2 0,21 1,0 28 28
TFr 4 0,23 1,6 42 26
TFr 5 0,23 2,1 57 27
TFr 8 0,26 2,8 70 25
TFr 80 0,26 3,9 94 24
TFr 9 0,28 5,0 105 21
TFr 90 0,28 6,3 126 20
TFr 10 0,29 7,5 150 20
TFr 11 0,31 9,6 173 18
TFr 12 0,32 11,8 212 18
TFr 13 0,33 14,0 252 18
TFr 130 0,35 16,0 272 17
TFr 14 0,34 18,0 270 15
ELASTIC SUSPENSION ANTIVIBRATING, RECOMMENDED TO HANG TUBES AND MACHINES.
The suspensions of this line allow a deflection between 15 and 31 mm, de-pending on the load in schedule. To identify the suitable model for the insu-lation of the frequencies in use, refer to the nomograph on page 2 of our catalogue.
CONSTRUCTIVE CHARACTERISTICS - n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment. - n° 1 zinced steel hanger and a screw dimensioned with the load in schedule, passing inside the spring between two guide disks, furnished with elastics gaskets. - n° 2 elastic gaskets positioned between disks and spring. On request: - Dusty epoxy painting for the spring as our RAL schedule.
* - Eye-bolt M10 for hanging to the fixing point.
- , .
-
15 31 , . , .2 .
- n° 1 - UNI EN 10270-1 SH . - n° 1 , , , . - n° 2 , .
: - "RAL"
* - - M10 .
*
129
3
- TFr..
suspensions line TFr..
*
Soleco engineering s.r.l. Via Masaccio, 12 - 20096 Pioltello (Mi) Italy - . +39 02 9244311 . +39 02 92103168
: www.solecosrl.com - : [email protected]
Каталог
20
14 -
rev
.01
, , Soleco engineering s.r.l .
The dimensions and the features of the equipments mentioned in this price list can be changed by Soleco engineering s.r.l. without notice.
ELASTIC SUSPENSION ANTIVIBRATING, RECOMMENDED TO HANG TUBES AND MACHINES.
The suspensions of this line allow a deflection between 16 and 38 mm, de-pending on the load in schedule. To identify the suitable model for the insu-lation of the frequencies in use, refer to the nomograph on page 2 of our catalogue.
CONSTRUCTIVE CHARACTERISTICS - n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment. - n° 1 zinced steel hanger and a screw dimensioned with the load in schedule, passing inside the spring between two guide disks, furnished with elastics gaskets. - n° 2 elastic gaskets positioned between disks and spring. On request: - Dusty epoxy painting for the spring as our RAL schedule.
* - Eye-bolt M10 for hanging to the fixing point.
MODEL
Ве Weight
Kg
K
Kg/mm
. Max static load
Kg
. Max deflection
mm
h
mm
TF 1 0,22 0,5 19 38
TF 2 0,23 1,0 36 36
TF 4 0,26 1,6 50 31
TF 5 0,30 2,1 67 32
TF 8 0,32 2,8 70 25
TF 80 0,32 3,9 113 29
TF 9 0,32 5,0 130 26
TF 90 0,34 6,3 164 26
TF 10 0,41 7,5 158 21
TF 11 0,42 9,6 182 19
TF 12 0,41 11,8 224 19
TF 13 0,45 14,0 252 18
TF 130 0,52 16,0 256 16
TF 14 0,46 18,0 288 16
144
- , .
-
16 38 , . , .2 .
- n° 1 - UNI EN 10270-1 SH . - n° 1 , , , . - n° 2 , .
: - "RAL"
* - - M10 .
4
- TF..
suspensions line TF..
*
*
Soleco engineering s.r.l. Via Masaccio, 12 - 20096 Pioltello (Mi) Italy - . +39 02 9244311 . +39 02 92103168
: www.solecosrl.com - : [email protected]
Каталог
20
14 -
rev
.01
, , Soleco engineering s.r.l .
- , .
-
16 39 , . , .2 .
- n° 1 - UNI EN 10270-1 SH . - n° 1 , , , . - n° 2 , .
: - "RAL"
* - - M12 .
ELASTIC SUSPENSION ANTIVIBRATING, RECOMMENDED TO HANG TUBES AND MACHINES.
The suspensions of this line allow a deflection between 16 and 39 mm, de-pending on the load in schedule. To identify the suitable model for the insu-lation of the frequencies in use, refer to the nomograph on page 2 of our catalogue.
CONSTRUCTIVE CHARACTERISTICS - n° 1 spring in harmonic steel UNI EN 10270-1 with surface protected by cataphoretic treatment. - n° 1 zinced steel hanger and a screw dimensioned with the load in schedule, passing inside the spring between two guide disks, furnished with elastics gaskets. - n° 2 elastic gaskets positioned between disks and spring. On request: - Dusty epoxy painting for the spring as our RAL schedule.
* - Eye-bolt M12 for hanging to the fixing point.
The dimensions and the features of the equipments mentioned in this price list can be changed by Soleco engineering s.r.l. without notice.
MODEL
Ве Weight
Kg
K
Kg/mm
. Max static load
Kg
. Max deflection
mm
h
mm
TWr 02 0,40 0,5 20 39
TWr 04 0,41 1,0 37 37
TWr 05 0,42 1,6 59 37
TWr 06 0,50 2,1 67 32
TWr 08 0,45 2,8 92 33
TWr 09 0,48 3,9 105 27
TWr 12 0,51 5,0 135 27
TVr 14 0,54 6,3 158 25
TVr 20 0,57 7,5 188 25
TVr 22 0,59 9,6 221 23
TVr 30 0,62 11,8 248 21
TVr 300 0,63 13,4 268 20
TVr 301 0,65 15,0 330 22
TVr 305 0,67 16,5 347 21
TVr 31 0,68 18,0 306 17
TVr 33 0,64 20,0 380 19
TVr 45 0,72 22,5 360 16
168
5
- TWr.. - TVr..
suspensions line TWr.. - TVr..
*
*
Soleco engineering s.r.l. Via Masaccio, 12 - 20096 Pioltello (Mi) Italy - . +39 02 9244311 . +39 02 92103168
: www.solecosrl.com - : [email protected]
Каталог
20
14 -
rev
.01
, , Soleco engineering s.r.l .
The dimensions and the features of the equipments mentioned in this price list can be changed by Soleco engineering s.r.l. without notice.
ELASTIC SUSPENSION ANTIVIBRATING, RECOMMENDED TO HANG TUBES AND MACHINES.
The suspensions of this line allow a deflection between 23 and 47 mm, de-pending on the load in schedule. To identify the suitable model for the insu-lation of the frequencies in use, refer to the nomograph on page 2 of our catalogue.
CONSTRUCTIVE CHARACTERISTICS - n° 1 spring in harmonic steel UNI EN 10270-1 with surface protected by cataphoretic treatment. - n° 1 zinced steel hanger and a screw dimensioned with the load in schedule, passing inside the spring between two guide disks, furnished with elastics gaskets. - n° 2 elastic gaskets positioned between disks and spring. On request: - Dusty epoxy painting for the spring as our RAL schedule.
* - Eye-bolt M12 for hanging to the fixing point.
MODEL
Ве Weight
Kg
K
Kg/mm
. Max static load
Kg
. Max deflection
mm
h
mm
TW 02 0,44 0,5 24 47
TW 04 0,46 1,0 44 44
TW 05 0,49 1,6 69 43
TW 06 0,52 2,1 84 40
TW 08 0,56 2,8 101 36
TW 09 0,60 3,9 133 34
TW 12 0,62 5,0 160 32
TV 14 0,67 6,3 183 29
TV 20 0,67 7,5 240 32
TV 22 0,78 9,6 221 23
TV 30 0,72 11,8 271 23
TV 300 0,78 13,4 281 21
TV 301 0,73 15,0 315 21
TV 305 0,85 16,5 380 23
188
- , .
-
23 47 , . , .2 .
CARATTERISTICHE COSTRUTTIVE - n° 1 - UNI EN 10270-1 SH . - n° 1 , , , . - n° 2 , .
: - "RAL"
* - - M12 .
6
- TW.. - TV..
suspensions line TW.. - TV..
*
*
Soleco engineering s.r.l. Via Masaccio, 12 - 20096 Pioltello (Mi) Italy - . +39 02 9244311 . +39 02 92103168
: www.solecosrl.com - : [email protected]
Каталог
20
14 -
rev
.01
, , Soleco engineering s.r.l .
The dimensions and the features of the equipments mentioned in this price list can be changed by Soleco engineering s.r.l. without notice.
- , .
-
16 38 , . , .2 .
- , . - n° 1 - UNI EN 10270-1 SH . - n° 2 , , , , , , , -50°C +120°C. - , .. - , , .
: - "RAL"
* - - M12 .
ELASTIC SUSPENSION ANTIVIBRATING, RECOMMENDED TO HANG TUBES AND MACHINES.
The suspensions of this line allow a deflection between 16 and 38 mm, de-pending on the load in schedule. To identify the suitable model for the insu-lation of the frequencies in use, refer to the nomograph on page 2 of our catalogue.
CONSTRUCTIVE CHARACTERISTICS - Zinc plated steel structure dimensioned to resist at the load in schedule. - n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment. - n° 2 plates as container and spring guide, formed with steel disks covered with thermoplastic material resistant for the ozone and hydrocarbons, agings detergents, UV ray, for high and low temperature from –50°C to 120°C. - Zinced steel screws dimensioned with the load in the schedule. - Bushings thermoplastic material, type of head and at the base, to ensure to continuity of insulation from sonic vibrations. On request: - Dusty epoxy painting for the spring as our RAL schedule.
* - Eye-bolt M12 for hanging to the fixing point.
MODEL
Ве Weight
Kg
K
Kg/mm
. Max static load
Kg
. Max deflection
mm
h
mm
NF 1 1,16 0,5 19 38
NF 2 1,17 1,0 36 36
NF 4 1,20 1,6 50 31
NF 5 1,24 2,1 67 32
NF 8 1,26 2,8 70 25
NF 80 1,26 3,9 113 29
NF 9 1,26 5,0 130 26
NF 90 1,28 6,3 164 26
NF 10 1,35 7,5 158 21
NF 11 1,36 9,6 182 19
NF 12 1,35 11,8 224 19
NF 13 1,39 14,0 252 18
NF 130 1,46 16,0 256 16
NF 14 1,40 18,0 288 16
245
7
- NF..
suspensions line NF..
*
*
Soleco engineering s.r.l. Via Masaccio, 12 - 20096 Pioltello (Mi) Italy - . +39 02 9244311 . +39 02 92103168
: www.solecosrl.com - : [email protected]
Каталог
20
14 -
rev
.01
, , Soleco engineering s.r.l .
- , .
-
19 47 , . , .2 .
- , , . - n° 1 - UNI EN 10270-1 SH . - n° 2 , , , , , , , -50°C +120°C. - , .. - , , .
: - "RAL"
* - - M16 .
ELASTIC SUSPENSION ANTIVIBRATING, RECOMMENDED TO HANG TUBES AND MACHINES.
The suspensions of this line allow a deflection between 16 and 38 mm, de-pending on the load in schedule. To identify the suitable model for the insu-lation of the frequencies in use, refer to the nomograph on page 2 of our catalogue.
CONSTRUCTIVE CHARACTERISTICS - Zinc plated steel structure dimensioned to resist at the load in schedule. - n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment. - n° 2 plates as container and spring guide, formed with steel disks covered with thermoplastic material resistant for the ozone and hydrocarbons, agings detergents, UV ray, for high and low temperature from –50°C to 120°C. - Zinced steel screws dimensioned with the load in the schedule. - Bushings thermoplastic material, type of head and at the base, to ensure to continuity of insulation from sonic vibrations. On request: - Dusty epoxy painting for the spring as our RAL schedule.
* - Eye-bolt M16 for hanging to the fixing point.
The dimensions and the features of the equipments mentioned in this price list can be changed by Soleco engineering s.r.l. without notice.
MODEL
Ве Weight
Kg
K
Kg/mm
. Max static load
Kg
. Max deflection
mm
h
mm
NW 02 2,10 0,5 24 47
NW 04 2,12 1,0 44 44
NW 05 2,14 1,6 69 43
NW 06 2,17 2,1 84 40
NW 08 2,22 2,8 101 36
NW 09 2,26 3,9 133 34
NW 12 2,28 5,0 160 32
NV 14 2,33 6,3 183 29
NV 20 2,33 7,5 240 32
NV 22 2,44 9,6 221 23
NV 30 2,39 11,8 271 23
NV 300 2,44 13,4 281 21
NV 301 2,39 15,0 315 21
NV 305 2,50 16,5 380 23
NV 31 2,45 18,0 396 22
NV 33 2,53 20,0 420 21
NV 45 2,63 22,5 495 22
NV 47 2,64 25,0 525 21
NV 48 2,65 27,0 621 23
NV 50 2,57 29,0 580 20
NV 501 2,74 31,5 662 21
NV 510 2,82 34,0 646 19
NV 51 2,83 37,0 703 19
295
8
- NW.. - NV..
suspensions line NW.. - NV..
*
*
Soleco engineering s.r.l. Via Masaccio, 12 - 20096 Pioltello (Mi) Italy - . +39 02 9244311 . +39 02 92103168
: www.solecosrl.com - : [email protected]
Каталог
20
14 -
rev
.01
, , Soleco engineering s.r.l .
- , .
-
22 55 , . , .2 .
- , , . - n° 1 - UNI EN 10270-1 SH . - n° 2 . - n° 2 , . - , .. - , , .
: - "RAL"
* - - M20 .
ELASTIC SUSPENSION ANTIVIBRATING, RECOMMENDED TO HANG TUBES AND MACHINES.
The suspensions of this line allow a deflection between 22 and 55 mm, de-pending on the load in schedule. To identify the suitable model for the insu-lation of the frequencies in use, refer to the nomograph on page 2 of our catalogue.
CONSTRUCTIVE CHARACTERISTICS - Zinc plated steel structure dimensioned to resist at the load in schedule. - n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment. - n° 2 steel disks as container and spring guide. - n° 2 elastic gaskets positioned between disks and spring. - Zinced steel screws dimensioned with the load in the schedule. - Bushings thermoplastic material, type of head and at the base, to ensure to continuity of insulation from sonic vibrations. On request: - Dusty epoxy painting for the spring as our RAL schedule.
* - Eye-bolt M20 for hanging to the fixing point.
The dimensions and the features of the equipments mentioned in this price list can be changed by Soleco engineering s.r.l. without notice.
MODEL
Ве Weight
Kg
K
Kg/mm
. Max static load
Kg
. Max deflection
mm
h
mm
NWH 02 4,84 0,5 28 55
NWH 04 4,91 1,0 51 51
NWH 05 4,99 1,6 67 43
NWH 06 5,00 2,1 92 44
NWH 08 5,05 2,8 115 41
NWH 09 5,01 3,9 187 48
NWH 12 5,05 5,0 225 45
NVH 14 5,11 6,3 265 42
NVH 20 5,18 7,5 278 37
NVH 22 5,25 9,6 346 36
NVH 30 5,22 11,8 401 34
NVH 300 5,20 13,4 469 35
NVH 301 5,51 15,0 510 34
NVH 305 5,43 16,5 462 28
NVH 31 5,61 18,0 468 26
NVH 33 5,51 20,0 520 26
NVH 45 5,51 22,5 630 28
NVH 47 5,56 25,0 675 27
NVH 48 5,66 27,0 810 30
NVH 50 5,72 29,0 725 25
NVH 501 5,61 31,5 882 28
NVH 510 5,71 34,0 782 23
NVH 51 5,82 37,0 814 22
373
9
- NWH.. - NVH..
suspensions line NWH.. - NVH..
*
*
Soleco engineering s.r.l. Via Masaccio, 12 - 20096 Pioltello (Mi) Italy - . +39 02 9244311 . +39 02 92103168
: www.solecosrl.com - : [email protected]
Каталог
20
14 -
rev
.01
, , Soleco engineering s.r.l .
ELASTIC SUSPENSION ANTIVIBRATING, RECOMMENDED TO HANG TUBES AND MACHINES.
The suspensions of this line allow a deflection between 16 and 38 mm, de-pending on the load in schedule. To identify the suitable model for the insu-lation of the frequencies in use, refer to the nomograph on page 2 of our catalogue.
CONSTRUCTIVE CHARACTERISTICS - Zinc plated steel structure dimensioned to resist to the load in schedule. - n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment. - n° 2 plates as container and spring guide, formed with steel disks covered with thermoplastic material resistant for the ozone and hydrocarbons, agings detergents, UV ray, for high and low temperature from –50°C to 120°C. - Zinced steel screws dimensioned with the load in the schedule. - Elastic gasket with zinc steel plate placed on the head and base plate of the structure, to guarantee the insulation continuity from the mechanical and sonic vibration in the two hanging points. On request: - Dusty epoxy painting for the spring as our RAL schedule.
* - Eye-bolt M12 for hanging to the fixing point.
- , .
-
16 38 , . , .2 .
- , , . - n° 1 - UNI EN 10270-1 SH . - n° 2 , , , , , , , -50°C +120°C. - , .. - , , .
: - "RAL"
* - - M12 .
The dimensions and the features of the equipments mentioned in this price list can be changed by Soleco engineering s.r.l. without notice.
245
MODEL
Ве Weight
Kg
K
Kg/mm
. Max static load
Kg
. Max deflection
mm
h
mm
NGF 1 1,17 0,5 19 38
NGF 2 1,18 1,0 36 36
NGF 4 1,22 1,6 50 31
NGF 5 1,25 2,1 67 32
NGF 8 1,27 2,8 70 25
NGF 80 1,28 3,9 113 29
NGF 9 1,27 5,0 130 26
NGF 90 1,29 6,3 164 26
NGF 10 1,36 7,5 158 21
NGF 11 1,37 9,6 182 19
NGF 12 1,37 11,8 224 19
NGF 13 1,41 14,0 252 18
NGF 130 1,47 16,0 256 16
NGF 14 1,41 18,0 288 16
10
( * ) З
. .
( * ) The Value is indicative and do not consider the deflection of the elastic
bearing.
- NGF..
suspensions line NGF..
*
*
Soleco engineering s.r.l. Via Masaccio, 12 - 20096 Pioltello (Mi) Italy - . +39 02 9244311 . +39 02 92103168
: www.solecosrl.com - : [email protected]
Каталог
20
14 -
rev
.01
, , Soleco engineering s.r.l .
MODEL
Ве Weight
Kg
K
Kg/mm
. Max static load
Kg
. Max deflection
mm
h
mm
NGW 02 2,21 0,5 24 47
NGW 04 2,23 1,0 44 44
NGW 05 2,26 1,6 69 43
NGW 06 2,29 2,1 84 40
NGW 08 2,33 2,8 101 36
NGW 09 2,37 3,9 133 34
NGW 12 2,39 5,0 160 32
NGV 14 2,44 6,3 183 29
NGV 20 2,44 7,5 240 32
NGV 22 2,55 9,6 221 23
NGV 30 2,49 11,8 271 23
NGV 300 2,55 13,4 281 21
NGV 301 2,50 15,0 315 21
NGV 305 2,62 16,5 380 23
NGV 31 2,56 18,0 396 22
NGV 33 2,65 20,0 420 21
NGV 45 2,74 22,5 495 22
NGV 47 2,75 25,0 525 21
NGV 48 2,76 27,0 621 23
NGV 50 2,69 29,0 580 20
NGV 501 2,85 31,5 662 21
NGV 510 2,93 34,0 646 19
NGV 51 2,94 37,0 703 19
- , .
-
19 47 , . , .2 .
- , , . - n° 1 - UNI EN 10270-1 SH . - n° 2 , , , , , , , -50°C +120°C. - , .. - , , .
: - "RAL"
* - - M16 .
ELASTIC SUSPENSION ANTIVIBRATING, RECOMMENDED TO HANG TUBES AND MACHINES.
The suspensions of this line allow a deflection between 19 and 47 mm, de-pending on the load in schedule. To identify the suitable model for the insu-lation of the frequencies in use, refer to the nomograph on page 2 of our catalogue.
CONSTRUCTIVE CHARACTERISTICS - Zinc plated steel structure dimensioned to resist to the load in schedule. - n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment. - n° 2 plates as container and spring guide, formed with steel disks covered with thermoplastic material resistant for the ozone and hydrocarbons, agings detergents, UV ray, for high and low temperature from –50°C to 120°C. - Zinced steel screws dimensioned with the load in the schedule. - Elastic gasket with zinc steel plate placed on the head and base plate of the structure, to guarantee the insulation continuity from the mechanical and sonic vibration in the two hanging points. On request: - Dusty epoxy painting for the spring as our RAL schedule.
* - Eye-bolt M16 for hanging to the fixing point.
The dimensions and the features of the equipments mentioned in this price list can be changed by Soleco engineering s.r.l. without notice.
295
11
( * ) З .
( * ) The Value is indicative and do not consider the deflection of the elastic bearing.
- NGW.. - NGV..
suspensions line NGW.. - NGV..
*
*
Soleco engineering s.r.l. Via Masaccio, 12 - 20096 Pioltello (Mi) Italy - . +39 02 9244311 . +39 02 92103168
: www.solecosrl.com - : [email protected]
Каталог
20
14 -
rev
.01
, , Soleco engineering s.r.l .
- , .
-
22 55 , . , .2 .
- , , . - n° 1 - UNI EN 10270-1 SH . - n° 2 . - n° 2 , . - , .. - , , .
: - "RAL"
* - - M20 .
ELASTIC SUSPENSION ANTIVIBRATING, RECOMMENDED TO HANG TUBES AND MACHINES.
The suspensions of this line allow a deflection between 22 and 55 mm, de-pending on the load in schedule. To identify the suitable model for the insu-lation of the frequencies in use, refer to the nomograph on page 2 of our catalogue.
CONSTRUCTIVE CHARACTERISTICS - Zinc plated steel structure dimensioned to resist at the load in schedale. - n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment. - n° 2 zinc steel disks as container and spring guide. - Zinced steel screws dimensioned with the load in the schedule. - Elastic gasket with zinc steel plate placed on the head and base plate of the structure, to guarantee the insulation continuity from the mechanical and sonic vibration in the two hanging points. On request: - Dusty epoxy painting for the spring as our RAL schedule.
* - Eye-bolt M20 for hanging to the fixing point.
The dimensions and the features of the equipments mentioned in this price list can be changed by Soleco engineering s.r.l. without notice.
MODEL
Ве Weight
Kg
K
Kg/mm
. Max static load
Kg
. Max deflection
mm
h
mm
NGWH 02 4,12 0,5 28 55
NGWH 04 4,19 1,0 51 51
NGWH 05 4,27 1,6 67 43
NGWH 06 4,28 2,1 92 44
NGWH 08 4,33 2,8 115 41
NGWH 09 4,29 3,9 187 48
NGWH 12 4,33 5,0 225 45
NGVH 14 4,39 6,3 265 42
NGVH 20 4,46 7,5 278 37
NGVH 22 4,53 9,6 346 36
NGVH 30 4,50 11,8 401 34
NGVH 300 4,82 13,4 469 35
NGVH 301 4,79 15,0 510 34
NGVH 305 4,71 16,5 462 28
NGVH 31 4,89 18,0 468 26
NGVH 33 4,79 20,0 520 26
NGVH 45 4,79 22,5 630 28
NGVH 47 4,84 25,0 675 27
NGVH 48 4,94 27,0 810 30
NGVH 50 5,00 29,0 725 25
NGVH 501 4,89 31,5 882 28
NGVH 510 4,99 34,0 782 23
NGVH 51 5,10 37,0 814 22
373
12
- NGWH.. - NGVH..
suspensions line NGWH.. - NGVH..
*
( * ) З .
( * ) The Value is indicative and do not consider the deflection of the elastic bearing.
Soleco engineering s.r.l. Via Masaccio, 12 - 20096 Pioltello (Mi) Italy - . +39 02 9244311 . +39 02 92103168
: www.solecosrl.com - : [email protected]
Каталог
20
14 -
rev
.01
, , Soleco engineering s.r.l .
- , .
- 22 ,
. , .2 .
- , , . - n° 1 - UNI EN 10270-1 SH . - n° 2 . - n° 2 , . - , .. - , , .
: - "RAL"
* - - M20 .
ELASTIC SUSPENSION ANTIVIBRATING, RECOMMENDED TO HANG TUBES AND MACHINES.
The suspensions of this line allow a deflection between 22 mm, depending on the load in schedule. To identify the suitable model for the insulation of the frequencies in use, refer to the nomograph on page 2 of our catalogue.
CONSTRUCTIVE CHARACTERISTICS - Zinc plated steel structure dimensioned to resist to the load in schedule. - n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment. - n° 2 steel disks as container and spring guide. - Zinced steel screws dimensioned with the load in the schedule. - Elastic gasket with zinc steel plate placed on the head and base plate of the structure, to guarantee the insulation continuity from the mechanical and sonic vibration in the two hanging points. On request: - Dusty epoxy painting for the spring as our RAL schedule.
* - Eye-bolt M20 for hanging to the fixing point .
The dimensions and the features of the equipments mentioned in this price list can be changed by Soleco engineering s.r.l. without notice.
MODEL
Ве Weight
Kg
K
Kg/mm
. Max static load
Kg
. Max deflection
mm
h
mm
NGSP2 7,46 90,0 1980 22 403
13
( * ) З
.
( * ) The Value is indicative and do not consider the deflection of the elastic
bearing.
- NGSP2
suspensions line NGSP2
*
Soleco engineering s.r.l. Via Masaccio, 12 - 20096 Pioltello (Mi) Italy - . +39 02 9244311 . +39 02 92103168
: www.solecosrl.com - : [email protected]
Каталог
20
14 -
rev
.01
, , Soleco engineering s.r.l .
The dimensions and the features of the equipments mentioned in this price list can be changed by Soleco engineering s.r.l. without notice.
ELASTIC SUSPENSION ANTIVIBRATING, RECOMMENDED TO HANG TUBES AND MACHINES.
The suspensions of this line allow a deflection between 10 and 22 mm, de-pending on the load in schedule. To identify the suitable model for the insu-lation of the frequencies in use, refer to the nomograph on page 2 of our catalogue.
CONSTRUCTIVE CHARACTERISTICS - 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment. - 2 plates containing the spring in elastomer with mechanical resistance, hydrocarbons and against aging. - steel structure protected by cataphoretic treatment and painted with epoxy powder - 2 screws and nuts to anchorage on the top and to the base mount. - Elastic body to dumper the sonic frequencies On request: - Dusty epoxy painting for the spring as our RAL schedule.
* - Eye-bolt M8 or M10 for hanging to the fixing point.
- , .
-
10 22 , . , .2 .
- n° 1 - UNI EN 10270-1 SH . - n° 2 , . - . - n° 2 M8 M10 - . - ч ч
х ч .
: - "RAL"
* - - M8-M10 .
14
MODEL
Ве Weight
Kg
K
Kg/mm
. Max static load
Kg
. Max deflection
mm
h
mm
NMNZb 0 0,34 0,4 9 22
NMNZb 1 0,34 0,7 15 22
NMNZb 2 0,35 1,0 19 19
NMNZb 3 0,35 1,7 34 20
NMNZb 4 0,36 2,3 35 15
NMNZb 5 0,36 3,0 45 15
NMNZb 8 0,38 4,6 56 12
NMNXb 10 0,38 6,0 84 14
NMNXb 101 0,38 7,2 101 14
NMNXb 11 0,38 9,0 108 12
NMNXb 12 0,41 10,6 127 12
NMNXb 13 0,39 13,0 130 10
150
- NMN..
suspensions line NMN..
Soleco engineering s.r.l. Via Masaccio, 12 - 20096 Pioltello (Mi) Italy - . +39 02 9244311 . +39 02 92103168
: www.solecosrl.com - : [email protected]
Каталог
20
14 -
rev
.01
, , Soleco engineering s.r.l .
The dimensions and the features of the equipments mentioned in this price list can be changed by Soleco engineering s.r.l. without notice.
ELASTIC SUSPENSION ANTIVIBRATING, RECOMMENDED TO HANG TUBES AND MACHINES.
The suspensions of this line allow a deflection between 9 and 13 mm, depen-ding on the load in schedule. To identify the suitable model for the insulation of the frequencies in use, refer to the nomograph on page 2 of our catalogue.
CONSTRUCTIVE CHARACTERISTICS - 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment. - 2 plates containing the spring in elastomer with mechanical resistance, hydrocarbons and against aging. - steel structure protected by cataphoretic treatment and painted with epoxy powder - 2 screws and nuts to anchorage on the top and to the base mount. - Elastic body to dumper the sonic frequencies On request: - Dusty epoxy painting for the spring as our RAL schedule.
* - Eye-bolt M8 or M10 for hanging to the fixing point.
- , .
-
9 13 , . , .2 .
- n° 1 - UNI EN 10270-1 SH . - n° 2 , . - . - n° 2 M8 M10 - . - ч ч
х ч .
: - "RAL"
15
140
MODEL
Ве Weight
Kg
K
Kg/mm
. Max static load
Kg
. Max deflection
mm
h
mm
NMNaZc 0 0,33 0,4 5 13
NMNaZc 1 0,34 0,7 9 12
NMNaZc 2 0,34 1,0 12 12
NMNaZc 3 0,34 1,7 20 12
NMNaZc 4 0,34 2,3 26 11
NMNaZc 5 0,35 3,0 30 10
NMNaZc 8 0,35 4,0 40 10
NMNaXc 10 0,35 5,5 50 9
- NMNa..
suspensions line NMNa..
Soleco engineering s.r.l. Via Masaccio, 12 - 20096 Pioltello (Mi) Italy - . +39 02 9244311 . +39 02 92103168
: www.solecosrl.com - : [email protected]
Каталог
20
14 -
rev
.01
, , Soleco engineering s.r.l .
И ЕЧА ИЯ - NOTE
Каталог
20
14 -
rev
.01
Каталог
20
14 -
rev
.01
О , , ц ц , . Э
ц .
We reserve the right to make, at any time, changes to the specifications contained in this file, without any prior notice. This file can not be reproduced and/or communicated to third without prior authoriza-tion.