Embed Size (px)
Citation preview
Comp Pro ®
RF ConnectorsDivision of RF Industries
7610 Miramar Road
San Diego, CA 92126
(800) 233-1728
(858) 549-6340
Fax: (858) 549-6345
www.rfindustries.com
Manufactured by
Interconnect Solutions
N Connectors for LMR®-400 and Equivalent Cable
Available Styles• Crimp and clamp style
attachments
• Straight and right angle
• Silver, nickel, white bronze (tri-metal) plating
• Male and female
• Standard and reverse polarity
• Standard assembly or compression crimp
• For LMR®-400 and equivalent cables, including plenum rated
• Shells with hex nut, knurling or both
V3
LMR is a registered trademark of Times Microwave Systems
RF Industries maintains one of the largest inventories of N connectors for Times Microwave LMR®-400 and equivalent cables in North America. The connectors are available for quick shipping to you and your customers. Contact our Sales Department to discuss the style that best fits your needs.
RFN-1006-4I n n
Crimp, No Braid Trim White Bronze Plated
Reverse Polarity
Compression Connectors
Connectors for LMR®-400-LLPL Plenum Rated Cable
RFN-1024-1SISolder Clamp Silver Plated
RP-1028-I n n Reverse Polarity Crimp
Nickel Plated
RFN-1028-SI2 n n
Crimp Silver Plated
RFN-1028-I2 n n Crimp Nickel Plated
RFN-1028-SI n n Crimp, Silver Plated
RFN-1028-I n n
Crimp, White Bronze Plated
RFN-1028 n n
Crimp, Nickel Plated
RFN-1009-I n n
Crimp, Right Angle White Bronze Plated
2-Piece (shown)
RFN-1009-I-99 n n
White Bronze Plated 3-Piece
RFN-1006-3I n n
Crimp, Silver Plated
RFN-1006-I n n
Crimp, Nickel Plated
RFN-1006-3I2 n n
Crimp Silver Plated
RFN-1006-I2 n n
Crimp Nickel Plated
RFN-1002-1SI Solder Clamp Silver Plated
RFN-1006-49I n n
Quick CrimpWhite Bronze Plated
RFN-1006-I-WB n n
Crimp, White Bronze Plated
RP-1006-3I n n
Reverse Polarity Crimp Nickel Plated
LMR is a registered trademark of Times Microwave Systems
RFN-1009-3I n n
Crimp, Right Angle Silver Plated
COMP-NM-400 n N, Male
COMP-NM-400PL nN, Male
Fits LMR-400-LLPL Cable COMP-NRA-400 n
N, Male Right AngleCOMP-NF-400 n
N, Female
See Reverse Side for Tools and Kits n Professional Crimp Handle / Kitn Commercial Crimp Handle n CompPro Compression Crimp Handle / Kit
Interconnect Solutions
Crimp Tool & Die Sets
n RFA-4009-205 Professional Crimp Handle & die in box, die cavity .100”, .118”, .429”
n RFA-4005-300Commercial Crimp Handle & die in box, die cavity .100”, .118”, .429”
Strippers
RFA-4420Center Conductor Prep Tool
RFA-4087Coax Stripping Tool
SDT400-502 Step Stripping Prep Tool
Notes: Specifications subject to change without notice. Comp Pro® is a registered trademark of RF Industries. LMR® is a registered trademark of Times Microwave Systems.
n RFA-4005Commercial Crimp Handle w/ Dies -01 & -02
n RFA-4009Professional Crimp Handle w/ Dies -01 & -05
Installation Tools for LMR®-400 and Equivalent Cable
RFA-4400Cable Stripper
n KIT400 Every tool you need to install “N” compression connectors quickly and securely every time.
n RFA-4511 Series of “N” connector installation kits give you everything you need, including twenty-five connectors, in a foam-lined rigid case. Each kit is designed specifically for the “N” crimp connector of your choice on LMR-400 cable.
Tool Kits
* All KIT400 and RFA-4511 parts are available individually
Pouch-50 Toolbag
n VT500 Compression Tool for 400 Cable
RC400-50 Replacement Blades
PEN-50 Marking Pen
TW1412 Torque Wrench for N Connector
CXC Cable Cutter
SDT400-50 Stripping Prep Tool
IT50NM Insertion Tool for N Connector
Assembly Instructions
RFA-4511 Kit Contents
n RFA-4009-20 Professional Crimp Handle
RFA-4009-05 Die hex cavities: .100”, .118”, .429”
RFA-4420 Cable Devil® Preparation Tool
RFA-4206 Professional Grade Cable Cutter
RFA-4400 1-Step Cable Stripper Series
25 pc. “N” Connectors Stripping Prep Tool
Assembly Instructions
RFA-4511 Kits and Connectors
RFA-4511-01 RFN-1006-3I
RFA-4511-03 RFN-1006-49I
RFA-4511-05 RFN-1006-I
RFA-4511-07 RFN-1028
RFA-4511-08 RFN-1028-I
RFA-4511-09 RFN-1009-I
RFA-4511-10 RFN-1006-I-WB
Comp Pro ®
