Mx94A-PTJ ENG

Make sure to read the Safety Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference.

See the label attached on the product and give the information to your dealer when you ask forservice.

M1994AM2294A

User’s Guide

1

Before Connecting to the PC

Stand Installation

Before setting up the product, ensure that the power supply, the computer system,and other attached devices is turned off.

1

2

3

Carefully place the product screen sidedown on a cushioned surface that willprotect product and screen from damage.

Insert the stand base into the product

Attach the monitor to the Stand Baseby turning the screw to the right.

* Turn the screw by using the screwhandle

Screw

2


Detaching Stand


1 2

3

Place the set screen side down on acushion or soft cloth.

Detach the monitor to the StandBase by turning the screw to the left.

Turn the screw by using the screw handle 4 Pull the stand base.

5

3


Positioning your display1. Adjust the position of the panel in various ways for maximum comfort.

Tilt Range


Warning:When adjusting the angle of the screen, do not putyour finger(s) in between the head of the monitorand the stand body. You can hurt your finger(s).

Locking DeviceUse this locking cable (This has to be purchasedseparately if required.) to prevent theft.

Theft prevention locking device

-5° ~ -2° 12°~ 18°

4

Name of the Remote Control Buttons

Name and Function of the Parts

1. Take out the battery cap.

2. Insert the batteries with correct polarity (+/-).

3. Close the battery cap.• Dispose of used batteries in the recycle bin to prevent

environmental pollution.

Inserting batteries into remote control.

AAA Type

POWERTV/PC INPUT

PR

PR

OK

MUTE

LIST Q.VIEW

SSMPSM

VOLVOL

I/II

TV/PC : Selects TV or PC mode.Switches the set on.

POWERINPUT

NOTE : In case of weak stereo sound signals, with stereo or Nicam stereotransmission, select mono reception.

Each time you press the Input button it willchange to TV AV Component RGB DVI HDMIIf nothing is inputted for several seconds thescreen will automatically move to theselected menu.

Number buttonsAble to directly select and change channel.

MUTESwitches the sound on or off.

PSM (Picture Status Memory) ButtonPress repeatedly to select Dynamic, Standard, Mild, Game or Userpicture mode.

SSM (Sound Status Memory) ButtonUse this button to select the sound tone. Press repeatedly to select Flat, Music, Movie, Sports, User sound tone.

Input

TVAVComponentRGBDVIHDMI

OK

5



POWERTV/PC INPUT

PR

PR

OK

MUTE

LIST Q.VIEW

SSMPSM

VOLVOL

I/II

I/II : Bilingual choice and sound mode selection

[TV]To switch from Stereo to Mono sound in case of stereo transmission,or from Nicam Stereo to Nicam Mono, in case of digital transmission.to switch from Nicam Dual I to Nicam Dual II or Nicam Dual I+II incase of Nicam Dual transmission.to choose between Dual I, Dual II or Dual I+II in case of bilingualtransmission : Dual I sends the primary broadcast language to the loudspeakers ;Dual II sends the secondary broadcast language to the loudspeakers ;Dual I+II sends a separate language to each loudspeakers.

[AV / Component]In AV/Component mode, you can select output sound for the left and right loudspeakers. Repeatedly press the I/II button to select the sound output.

L+R : Audio signal from audio L input is sent to left loud-speaker and audio signal from audio R input is sent to right loud-speaker.

L+L : Audio signal from audio L input is sent to left and right loud-speakers.

R+R : Audio signal from audio R input is sent to left and right loud-speakers.

LIST : Programme listTo display the programme list (0~ 99).

Q.VIEW : QUICK VIEW Button

To display the previously selected TV channel

Note: TV channels displayed in blue have been setupto be skipped in the Programme Edit menu.

Programme List

OK MENU

0 C 01 5 C 071 C 35 6 C 502 C 05 7 C 513 C 11 8 C 414 C 04 9 C 63

6



PR

PR

OK

MENU SLEEP *

VOLVOL

ARC/*

PR ( ) ButtonsAble to change channel.

VOL ( ) Buttons Able to adjust sound.

OK ButtonUse when functional adjustment is completed.

MENUUse this button to enter the On Screen Displaymenu.

SLEEP : SLEEP TimerYou can set a time period after which the TV / AV / RGB / Component / DVI/HDMI shouldswitch itself to standby. Press the keyrepeatedly to select the number of minutes.

ARC/*To select the image size of the screen.• When TV / AV mode: Spectacle, Original, 4:3, 16:9,14:9, Zoom1, Zoom2

• When RGB/DVI /HDMI/Component mode: 4:3,16:9

10 20 30 60

240 180 120 90

_ _ _ (off)

PR

PR

OK

MENU SLEEP

UPDATE

SIZEHOLD

INDEX

TEXT

TIMEMIX

REVEAL MODE

VOLVOL

M X? i

ARC/*

(Depends on the country the remote control can be provided different.)

7


HOLD

Press the button to stop the automatically rotatingof the sub pages. Press the button again tocontinue the automatic rotating again.

SIZE

Press the button repeatedly to display the upperpart, the lower part and then to return to thenormal page size.

MIX

Display the teletext pages superimposed onthe TV picture. To switch the TV picture offpress this button again.

TIME

Press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RED/GREEN, or NUMBER buttons. Press again to exit this function.

PR

PR

OK

LIST

MENU

Q.VIEW

SLEEP

UPDATE

SIZEHOLD

INDEX

TEXT

TIMEMIX

REVEAL MODE

VOLVOL

M X? i

ARC/*

Yellow key Favourite Program On : Rotate favourite channel

Favourite Program Off : To display the previously selected TV channel.

TEXT

To select the teletext on or off. The main indexpage or the last selected page appears on thescreen together with an information headline andan option line at the bottom of the screen.

Remote Control - Using the Teletext function(Depends on the country the remote control can be provided different.)

8


REVEAL

Press the button to reveal/conceal the hiddeninformation, such as solutions to riddles andpuzzles. Press this button again to remove theinformation from the display.

INDEX

To display the main index.

MODE

The mode will be switched in the Teletext mode.

UPDATE

Press the button to appear the TV programme. At the top of screen indicates that you are still in theteletext mode. Before interrupting teletext, you mayselect a page number. When the page has beenfound, the information line appears briefly on yourscreen. Press the button again to reappear teletext.

Remote Control - Using the Teletext function

PR

PR

OK

MENU SLEEP

UPDATE

SIZEHOLD

INDEX

TEXT

TIMEMIX

REVEAL MODE

VOLVOL

M X? i

ARC/*

(Depends on the country the remote control can be provided different.)

9

Power Connector : Connect the power cord.

HDMI Digital Signal Connector

DVI Digital Signal Connector

D-Sub Analog Signal Connector

RGB, DVI Sound Jack : Connect to the jack in the PC sound card or D-TV sound Output Jack.

TV Tuner Jack : Connect the antenna.

AV Input Terminal

Component Input Terminal


Rear View

AC IN

AC IN

AUDIO IN(RGB/DVI)

VIDEO

COMPONENTIN

AUDIO

Y

PB

PR

AUDIO

L

R

L

VIDEO

R

RGB IN (PC)

DVI-D

HDMI

S-VIDEO

ANTENNA IN

(MONO)

AUDIO IN(RGB/DVI)

VIDEO

COMPONENTIN

AUDIO

Y

PB

PR

AUDIO

L

R

L

VIDEO

R

RGB IN (PC)

DVI-D

HDMI

S-VIDEO

ANTENNA IN

AC IN (MONO)

10

AV Input Terminal

AUDIO

L

VIDEO

R

S-VIDEO

AC IN (MONO) Audio Input Terminal

Video Input Terminal

S-Video Input Terminal


11

AUDIO IN(RGB/DVI)

DVI-D

11

Connecting to your PC

First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable.

Connecting with the D-Sub signal input cable.

Rear side of the product.

Connecting to External Devices

RGB IN (PC)

Macintosh Adapter (Not included)Use the standard Macintosh adapter since anincompatible adapter is available in the market.(Different signaling system)

1.

Audio cable

Connecting with the DVI signal input cable.

A

B

2.




Connect the audio cable.

• Make sure to check the sound card connection terminal in the PC before connecting to the product.If the PC sound card supports both Speaker Out and Line Out, change it to Line Out by setting the jumperor the PC application. (For more details, refer to the sound card user’s guide.)- Speaker Out : The terminal connected to the speaker that is not equipped with an amplifier.- *Line Out : The terminal connected to the speaker equipped with an amplifier.If Audio Out in the PC sound card has only Speaker Out, reduce the PC volume. This product is integratedwith an amplifier.

AC IN

AC IN

AUDIO IN(RGB/DVI)

VIDEO

COMPONENTIN

AUDIO

Y

PB

PR

AUDIO

L

R

L

VIDEO

R

RGB IN (PC)

DVI-D

HDMI

S-VIDEO

ANTENNA IN

(MONO)

12

• Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.Note

Turn on the PC. 2

1

Rear side of the product.Connect the power cord.

Select an input signal.Press the INPUT button on the remote control to select the input signal. Or, press the INPUT button at the top side of the product.

Turn on power by pressing the power button on the product.

Power button

• Select RGB AC IN

AC IN

AUDIO IN(RGB/DVI)

VIDEO

COMPONENTIN

AUDIOY

PB

PR

AUDIO

L

R

L

VIDEO

R

RGB IN (PC)

DVI-D

HDMI

S-VIDEO

ANTENNA IN

(MONO)

3.

4.

5.


Input


MENU

A B • Select DVI

Each time you press the Input button it will change to TV AV Component RGBDVI HDMI.

If nothing is inputted for several seconds the screen will automatically move to the selected menu.

Input


MENU

INPUT ENTER

13


When using the RCA cable.• Connect the input terminal with aproper colour match.

When using the S-Video cable.• Connect to the S-Video input terminal towatch high image quality movies.

VIDEOOUT

AUDIOOUT

AUDIO

L VID

EO

R S-VIDEO

(MONO)

Rear side ofthe Product

RCA Cable

Connect the video/audio cable as shown in the figure below and then connect the power cord(See page 9).

Connecting to VCR/DVD

VCR/DVD

BA

(Not included)

VIDEOOUT

AUDIOOUT

AUDIO

L VID

EO

R S-VIDEO

(MONO)

RCA Cable S-Video Cable

VCR/DVD

Rear side ofthe Product

(Not included)(Not included)

1.

• In case the RCA cable is connected simultaneously as S-Video cable is connected, S-Videocable is first.


When connecting with a RCA cable.• Select AV

When connecting with a S-Video cable.

• Select AV

B

A

2.

Note

INPUT ENTER

Each time you press the Input button it will change to TV AV Component RGB DVI HDMI.


Input


MENU

14


VIDEO

COM

PONENT

IN

AUDIO

YPB

PRLR

Rear side of the Product

Component Cable(Not included)

Connect the video/audio cable as shown in the figure below and then connect the powercord (See page 9).

Connecting to Set-top Box /DVD (480i/576i/480p/576p/720p/1080i)

Set-top Box /DVD

• Connect the input terminal with a proper color match.

1.

Audio Cable(Not included)


• Select Component

2.

INPUT ENTERInput


MENU



15


Input


MENU

Rear side of the Product

Connect the HDMI cable as shown in the figure below and then connect the power cord(See page 9).

When watching HDMI from the DVD/Set-top Box

[Set-top Box/DVD]

1.


• Select HDMI

2.INPUT ENTER



HDMI cable(not included)

16


Connect the D-sub cable, RCA/PC cable as shown in the below figure and thenconnect the power cord. (see page 9)

RGB IN (PC)

AUDIO IN(RGB/DVI)

[Rear side of the Product]

[Set-top Box/DVD]

D-Sub cable

RCA-Stereo cable(not included)

When watching RGB/DVI from the Set-top Box /DVD


2.

1.

AUDIO IN(RGB/DVI)

DVI-D

[Rear side of the Product]

[Set-top Box/DVD]

DVI cable

RCA-Stereo cable(not included)

BA

• Select RGBA B • Select DVI

INPUT ENTER



Input


MENU

Input


17


Rear Side of the Product

Antenna Cable(Not included.)

Check if the antenna cable is connected at the rear side of the product and then, connectthe power cord.

When Watching TV

• Select TV

AC IN

AC IN

AUDIO IN(RGB/DVI)

VIDEO

COMPONENTIN

AUDIO

Y

PB

PR

AUDIO

L

R

L

VIDEO

R

RGB IN (PC)

DVI-D

HDMI

S-VIDEO

ANTENNA IN

(MONO)

ANTENNA IN

1.

2.Select an input signal.Press the INPUT button on the remote control to select the input signal. Or, press the INPUT button at the Top of the product.

INPUT ENTER Input


MENU



18

To arrange the cables

AC IN

AUDIO IN(RGB/DVI)

VIDEO

COMPONENTIN

AUDIO

Y

PB

PR

AUDIO

L

R

L

VIDEO

R

RGB IN (PC)

DVI-D

HDMI

S-VIDEO

ANTENNA IN

1. Tie cables together with a cable tie as shown in the illustration.

AUDIO IN(RGB/DVI)

AUDIOR

L

R

HDMI

Cable tie

19

Name of the Buttons in the Screen Adjustment Unit

Power Indicator

• Adjust the volume.

• Use this button to show/hide the OSD (On Screen Display) menuscreen.

MENU Button

• Use this button to control the channel for the TV signal.

Adjusting the Screen

Volume 30

• This Indicator lights up blue when the display operates normally (On Mode).If the display is in Sleep (Energy Saving) Mode, this indicator colour changesto amber.

• Use this button to turn the product on and off.Power Button

• Use this button to select an icon or adjust the setting in the OSD screen.

INP

UT

ME

NU

VO

LP

RO

K

OSD Select/AdjustButton

20


Name of the Buttons in the Screen Adjustment Unit

OK Button

TV TelevisionAV CVBS, S-VideoComponent HDTV, DVDRGB D-Sub analog signalDVI DVI Digital signalHDMI HDMI Digital signal

INPUT Button

• ENTER button is usually used in choosing the MENU.When there is no MENU on the screen pushing the ENTER buttonwill give the information about the current input source.

Input


MENU



21

OSD(On Screen Display)The OSD function enables you to adjust the screen status conveniently since it provides graphicalpresentation.

Note

OSD (On Screen Display) Menu

Icon Function Description

Picture

Sound

Timer

Adjusting the time function.

Adjusting the screen function.

Adjusting the sound function.

Adjusting the picture function.

Special

Selecting the special function.

Screen


Channel

Set/Select the channel when using the TV

22


OSD (On Screen Display) Screen Tracking Order

Press the MENU Button, then the main menu of the OSD will appear.

To access a control, use the Buttons.

When the icon you want becomes highlighted, press the ENTER Button.

Use the Buttons to adjust the item to the desired level.

Accept the changes by pressing the ENTER Button.

Exit the OSD by pressing the MENU Button repeatedly .

1

2

3

4

5

6

• Use the remote control to adjust the OSD screen.

Pop up themenu screen

Move whereyou want to

adjust

Select a menu icon Adjust the status Saveadjustment

Exit from themenu screen.

MENU MENU

CH

CH

ENTER VOLVOL

CH

CH

ENTER VOLVOLENTER ENTER

23


STATION ID set/Select the channel when using the TV

It should be set before run auto searching.Press the buttons to select the TV system of the country or part of theworld from where you want to receive the TV channels. * Supporting channel : C(V/UHF 02~69) S(Cable 01~41)BG : PAL B/G, SECAM B/G (Europe/East Europe)I : PAL I/II (U.K/Ireland)DK : PAL D/K, SECAM D/K (East Europe)M : NTSC M

To select a program number or enter the program number with the numberbuttons from where you want to start searching for new channels. If e.g.you want to keep the channels 1 to 10 stored earlier, enter programnumber 11. Your TV search for new channels from number 11 onwards.* Numbers available to store : 0~99

Press OK or button to start automatic programming. All available TVchannels will be searched and stored automatically. To stop autoprogramming, press the MENU button. When auto programming iscompleted, the programme list menu appears.

System

Storagefrom

Search

Auto programme

Press the buttons to select the channel number or enter theprogramme number with the number buttons in where you want to storechannel.

Press the buttons to select the TV system of the country or part ofthe world from where you want to receive the TV channels. BG : PAL B/G, SECAM B/G (Europe/East Europe)I : PAL I/II (U.K/Ireland)DK : PAL D/K, SECAM D/K (East Europe)M : NTSC M

Storage

System

Manual programmeTo change the channel.(Change each item in ManualProgram and press the "MENU"button to save the settings)

Station

OK MENU

Auto programmeManual programmeProgramme editFavourite programme

To set

Station

OK MENU


To set

24



Press the buttons to select a TV channel to be deleted. -> Press the red key on the remote control -> The background colour of the selected channel will change to red.Press the Delete button one more time to delete the selected channel.All the following channels are shifted up one position.

Press the buttons to select a TV channel to be copied. -> Press the green key on the remote control. All the following channel numbers are shifted down one position.

Press the buttons to select a channel number to be moved. -> Press the yellow key on the remote control. -> Press the buttons to move the TV channel to the desired channel number. -> Press the yellow key again to release this function.

Press the buttons to select a channel number to be skipped. -> Press the blue key on the remote control. The skipped TV channel is displayed in blue.

Delete

Copy

Move

Skip

Press the buttons to select VHF/UHF for aerial channels or Cable forcable channels. To select the channel reception type. : VHF/UHF / Cable.

If you know the channel number, enter it directly with the digit buttons 0 to 9.

In case of poor reception, you can improve the reception by fine tuning. Usethe buttons to fine tune for the best picture and sound.

Use the buttons to search next channel backward or forward direction.

To see the assigned channel name. It is possible to change the name stored in the memory or to assign a nameto a TV channel which has not yet been entered. A name with up 5 letters ornumbers can be given to the program numbers 0 to 99.

Press the buttons to move cursor to be changed. -> Press thebuttons to select a character.(space, number 0~9, and alphabet A~Z, +,-) ->Press OK button or MENU button.

Band

Channel

Fine

Search

Name

Programme edit Station

OK MENU


To set

Programme edit

OK MENU

Delete CopyMove Skip

0 C 01 5 C 071 C 35 6 C 502 C 05 7 C 513 C 11 8 C 414 C 04 9 C 63

25



Favouriteprogramme

This function lets you select your favourite programs directly. (8 channel)Press the buttons to select a channel.

* Yellow key (remote control) :

Favourite Program On : Rotate favourite channel Favourite Program Off : To display the previously selected TV channel.

Station

OK MENU


Off_ _ _ _ _ _ __ _ _ _ _ _ __ _ _ _ _ _ __ _ _ _ _ _ __ _ _ _ _ _ __ _ _ _ _ _ __ _ _ _ _ _ __ _ _ _ _ _ _

26

PICTURE ID adjust the picture function(RGB/DVI)


PSM

The PSM function automatically adjusts the screenimage quality.• Dynamic

Select this option to display with a sharp image. • Standard

The most general and natural screen displaystatus.

• MildSelect this option to display with a mild image.

• GameSelect this option to enjoy dynamic image whenplaying a game.

• UserSelect this option to use the user-defined settings.

The CSM function automatically adjusts the screencolour set. • 9300K

Slightly purplish white.• 6500K

Slightly bluish white.• sRGB

Slightly lower brightness. • User

Select this option to use the user-defined settings.Red / Green / BlueSet your own colour levels.

Picture

OK MENU

PSMCSMXDCinemaReset

Dynamic

Standard

Mild

Game

User

<

CSM

Picture

OK MENU

PSMCSMXDCinemaReset

9300K

6500K

sRGB

User

<

XD

Return to the default settings PSM, CSM, XD, Cinema at the factory.Reset

Picture

OK MENU

PSMCSMXDCinemaReset

Auto

Manual

<

XD is LG Electronics unique picture improvingtechnology to display a real HD source through anadvanced digital signal processing algorithm.It's not available to use this function in RGB-PC orDVI-PC modes.Manual is activated after selecting the user of PSM.(It's not working RGB-PC, DVI-PC mode.)

(Function works in the following mode -TV, AV, Component 480i/576i)When you watch the movie, this function adjusts the set to the best picture appearance.(It's not working RGB/DVI mode.)

Cinema

27

PICTURE ID adjust the picture function (TV/AV)


PSM

CSM

The PSM function automatically adjusts the screenimage quality. • Dynamic

Select this option to display with a sharp image. • Standard

The most general and natural screen displaystatus.

• MildSelect this option to display with a mild image.

• GameSelect this option to enjoy dynamic image whenplaying a game.

• UserSelect this option to use the user-defined settings.

The CSM function automatically adjusts the screencolour set. • Cool

Slightly purplish white.• Normal

Slightly bluish white.• Warm

Slightly reddish white. • User

Select this option to use the user-defined settings.Red / Green / BlueSet your own colour levels.

XD is LG Electronics unique picture improvingtechnology to display a real HD source through anadvanced digital signal processing algorithm.It's not available to use this function in RGB-PC orDVI-PC modes.Manual is activated after selecting the user of PSM.

OK MENU

Picture

OK MENU

PSMCSMXDCinemaReset

Dynamic

Standard

Mild

Game

User

<

Picture

OK MENU

PSMCSMXDCinemaReset

Cool

Normal

Warm

User

<

XD

Picture

OK MENU

PSMCSMXDCinemaReset

Auto

Manual

<

Return to the default settings PSM, CSM, XD, Cinema at the factory.Reset

(Function works in the following mode - TV, AV, Component 480i/576i)When you watch the movie, this function adjusts the set to the best picture appearance.

Cinema

28


SOUND ID to adjust the sound function

SSM

AVL

Balance

The best sound tone quality will be selected automatically depending on the video typethat you're currently watching.• Flat : The most commanding and natural audio.• Music : Select this option to enjoy the original sound when listening to the music.• Movie : Select this option to enjoy sublime sound.• Sports : Select this option to watch sports broadcasting.• User : Select this option to use the user-defined audio settings.

To adjust uneven sound volumes across all channels or signals automatically to themost appropriate level. To use this feature, select On.

Use this function to balance sound from the left and right speakers.

Sound

OK MENU

SSMAVLBalance 0

Flat

Music

Movie

Sports

User<

29

TIME ID to adjust the time function


• In the event of power interruption (disconnection or power failure), the Clock must be reset.• Two hours after the set is switched on by the On time function it will automatically switch

back to off mode unless a button has been pressed.• Once the On or Off time is set, these functions operate daily at the preset time.• Off time function overrides On time function if they are set to the same time.• The set must be in off mode for the On time to work.• On time will move on to auto off if no activity is received in 2hours after setting the On time.

Note

Clock

Off/On time

Auto sleep

This function is used to set up of current time.You must set the time correctly before using On/Off time function.1) Press the MENU button and then use button to select the TIME menu.2) Press the button and then use button to select the Clock menu.3) Press button and then use button to set the hour(00~23).4) Press button and then use button to set the minutes(00~59).

The default value is -- : --.5) Press the OK/MENU button to save.

The Off time automatically switches the set to off mode at the pre-set time.1) Press the MENU button and then use button to select the TIME menu. 2) Press the button and then use button to select Off time or On time.3) Press the button and then use button to set the hour(00~23). 4) Press the button and then use button to set the minutes(00~59). 5) Press the button and then use button to select On or Off. 6) Only On time function; Press the button and then button to adjust volume level

and program number. 7) Press the OK/MENU button to save.

If Auto sleep is active and there is no input signal, the set switches to off modeautomatically after 10 minutes. ( It is not working in PC)1) Press the MENU button and then use button to select the Auto sleep menu. 2) Press the button and then use button to select On or Off. 3) Press the OK/MENU button to save .

Time

OK MENU

ClockOff timeOn timeAuto sleep

-- : --

30


SPECIAL ID to Select the special function

Use the buttons to select On or Off. It can be set up so that it can only be used withthe remote control. This feature can prevent unauthorized viewing.

In order to lock the OSD screen adjustment, set the Child lock tab to the 'On' position.In order to unlock it, do the following :* Push the MENU button on the remote control and set Child lock to the 'Off' position.

Language

Child lock

DDC-CI

XD Demo

To choose the language in which the control names are displayed.

Special

OK MENU

Language

Child lock

DDC-CI

XD Demo

Use it to see the difference between XD demo on and XD Demo off.(XD Demo function is not available in RGB PC/ DVI PC mode.)

DDC/CI(Display Data Channel Command Interface) is communication protocol forcommunications between PC and monitor. DDC/CI makes it possible to adjust and setup detailed functions on PC instead of themonitor OSD. Monitor can be adjusted with PC by connecting communication between PC and monitorwhen DDC/CI is ON, and monitor cannot be adjusted with PC because communicationbetween PC and monitor is disconnected when DDC/CI is OFF.

31

SCREEN ID to adjust the screen function


Auto config.

Manualconfig.

ARC

Reset

This button is for the automatic adjustment of the screen Position, Clock and Phase.(It is not working in RGB-DTV, DVI.)

This button is for the manual adjustment of the screen Position, Clock and Phase.• H-Position (It is not working In DVI-PC mode.)

To move the displayed image left or right.• V-Position (It is not working In DVI-PC mode.)

To move the displayed image up or down.• Clock (It is not working In RGB-DTV, DVI mode.)

To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change.

• Phase (It is not working In RGB-DTV, DVI mode.)To adjust the focus of the display. This item allows you to remove any horizontal noiseand clear or sharpen the image of characters.

To select the image size of the screen.• When TV/Video mode: Spectacle, Original, 4:3, 16:9, 14:9, Zoom1, Zoom2 • When RGB/DVI/Component mode: 4:3, 16:9

Use this function to reset the product to the factory default. However, language selectionwill not be initialized.(It is working in RGB-PC, RGB-DTV, DVI-DTV mode.)

Screen

OK MENU

Auto config.Manual config.ARCReset

To set

32

Troubleshooting

• Install the product driver, which is provided withthe product, or download it from the web site.(http://www.lge.com)

• See if the plug&play function is supported byreferring to the video card user's guide.

� Did you install the driver?

'Unknown Product' message appears when the product is connected.

• Check if the power cord is properly connectedto the outlet.

• See if the power switch is turned on.

• Adjust brightness and contrast again.

• If the product is in power saving mode, movethe mouse or press any key.

• In DVD Player or Set-top Box, check the powerstatus of connected device.

• The signal from the PC (video card) is out ofthe vertical or horizontal frequency range of theproduct. Adjust the frequency range byreferring to the Specifications in this user'sguide.* Maximum resolution

M1994A : RGB : 1440 X 900 @75 Hz DVI : 1440 X 900 @60 Hz

M2294A : 1680 X 1050 @60 Hz

• The signal cable between PC and product isnot connected. Check the signal cable.

• Press the 'INPUT' button in the remote controlto check the input signal.

� Is the product's power cordconnected?

� Is the power indicator turning on?

� Power is on, power indicator is bluebut the screen appears extremelydark.

� Does the power indicator look amber?

� Does the 'Out of range' messageappear?

� Does the 'Check signal cable'message appear?

No image is displayed

Note * Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of timesevery second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second.The unit is Hz.

* Horizontal frequency: The horizontal interval is the time to display one vertical line. When the 1 is divided byhorizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontalfrequency. The unit is kHz.

33

• If you use a fixed image for a long time, the pixelsmay be damaged quickly. Use the screen saverfunction.

� After-image appears when theproduct is turned off.

After-image appears on the product.

� Is the screen position wrong?

� Do thin lines appear on thebackground screen?

� Horizontal noise appears or thecharacters look blurred.

The screen image looks abnormal.• Adjust the Position menu in OSD .• See if the video card resolution and frequency

are supported by the product. If the frequency isout of range, set to the recommended resolutionin the Control Panel – Display – Setting menu.

• Adjust the Clock menu in OSD.

• Adjust the Phase menu in OSD.

Troubleshooting

• See if you have selected the proper channelmode.

• Use the automatic channel setup function.• Check if the TV antenna is properly connected.

� The TV signal is not being received.

The TV function does not work.

34

• Set the color resolution to more than 24 bits (truecolour)Select Control Panel – Display – Settings – color Table menu in Windows.

• Check the connection status of the signal cable.Or, re-insert the PC video card.

• Several pixels (red, green, white or black colour)may appear on the screen, which can beattributable to the unique characteristics of theLCD panel. It is not a malfunction of the LCD.

� Screen has poor color resolution (16colors).

� Screen color is unstable or mono-colour.

� Do black spots appear on the screen?

Screen color is abnormal.

• Check if the audio cable is connected properly.• Adjust the volume.• Check if the sound is set properly.

• Adjust the volume.

� No sound?

� Sound is too low.

The audio function does not work.

Troubleshooting

35

Specifications

The product specifications can change without prior notice for product improvement.

M1994A

Screen Type 19 inches Wide (48.133 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) PanelVisible diagonal size: 48.133 cm

Pixel Pitch 0.2835 mm

Max. Resolution RGB : 1440 X 900 @75 Hz DVI : 1440 X 900 @60 Hz

Recommended Resolution 1440 X 900 @60 Hz

Horizontal Frequency 28 - 83 kHz

Vertical Frequency 56 - 75 Hz

Synchronization Type Separate Sync, Digital

S-Video, Composite video, TV, D-Sub Analog, DVI-D, HDMI, PC Audio In, Headphone/Earphone, component

Rated Voltage AC 100-240V~ 50/60Hz 0.8APower Consumption On Mode : 50 W (Typ.)

Sleep Mode ≤ 1 W (RGB)Off Mode ≤ 1 W

Tilt Range -5 ̊~ 15˚

Size (WxDxH) 456.2 mm x 193.2 mm x 394.7 mmWeight (excl. package) 4.3 kg (9.48 Ibs)

Operational Condition Temperature: 10˚C ~ 35˚C , Humidity: 20% ~ 80% Storage Condition Temperature: -10˚C ~ 60˚C , Humidity: 5% ~ 90%

LCD Panel

Video Signal

Input Connector

Power

Tilt

Dimension/Weight

Environmental Conditions

36

The product specifications can change without prior notice for product improvement.

Specifications

Screen Type 22 inches Wide (55.867 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) PanelVisible diagonal size: 55.867 cm

Pixel Pitch 0.282 mm

Max. Resolution RGB : 1680 X1050 @60 Hz DVI : 1680 X1050 @60 Hz

Recommended Resolution 1680 X1050 @60 Hz

Horizontal Frequency 28 - 83 kHz

Vertical Frequency 56 - 75 Hz

Synchronization Type Separate Sync, Digital

S-Video, Composite video, TV, D-Sub Analog, DVI-D,

HDMI, PC Audio In, Headphone/Earphone, component

Rated Voltage AC 100-240V~ 50/60Hz 0.9APower Consumption On Mode : 50 W (Typ.)

Sleep Mode ≤ 1 W (RGB)Off Mode ≤ 1 W

Tilt Range -5 ̊~ 15˚

Size (WxLxH) 521.7 mm x 193.2 mm x 435.4 mmWeight (excl. package) 5.0 kg (11.0 Ibs)

Operational Condition Temperature: 10˚C ~ 35˚C , Humidity: 20% ~ 80% Storage Condition Temperature: -10˚C ~ 60˚C , Humidity: 5% ~ 90%

LCD Panel

Video Signal

Input Connector

Power

Tilt

Dimension/Weight

Environmental Conditions

M2294A

37

PC Mode – Preset ModeIt's not support in HDMI-PC mode.

Power Indicator

Mode Product

On ModeSleep ModeOff Mode

BlueAmber

Off

Specifications

DTV -Timing

Preset modeHorizontalFrequency

(kHz)

VerticalFrequency

(Hz)

*1*23

*4*5*6789

720 x 480/60p720 x 480/60p720 x 576/50p1280 x 720/50p1280 x 720/60p1280 x 720/60p1920 x 1080/60i1920 x 1080/60i1920 x 1080/50i

31.4731.531.2537.544.964533.7233.7528.125

606050506060606050


(kHz)

VerticalFrequency

(Hz)Preset mode

HorizontalFrequency

(kHz)

VerticalFrequency

(Hz)

12345678910

720 x 400640 x 480640 x 480800 x 600800 x 6001024 x 7681024 x 7681152 x 8641280 x 10241280 x 1024

31.46831.46937.50037.87946.87548.36360.12367.50063.98179.976

70607560756075756075

1112

1680 x 10501680 x 1050

64.67465.290

6060

* : User have to select directness PC or DTV when using the PC or the Set-top box this resolution.


(kHz)

VerticalFrequency

(Hz)Preset mode

HorizontalFrequency

(kHz)

VerticalFrequency

(Hz)

12345678910

720 x 400640 x 480640 x 480800 x 600800 x 6001024 x 7681024 x 7681152 x 8641280 x 10241280 x 1024

31.46831.46937.50037.87946.87548.36360.12367.50063.98179.976

70607560756075756075

111213

1440 x 9001440 x 9001440 x 900

55.555.93570.635

606075

M1994A

M2294A

* 1~13 : RGB mode * 1~12 : DVI mode

Documents

Mx94A-PTJ ENG