Upload
idondivi
View
219
Download
2
Tags:
Embed Size (px)
DESCRIPTION
Absolutely, it's even easy. You'll have to clip the wings off, so the crossbars from the buccal wings fit together. Then you will end up with the ideal spacing between the implants.
Citation preview
Copyright © 2011 Idondivi, Inc. All rights reserved.
Multiple implants next to each other
2 Copyright © 2011 Idondivi, Inc. All rights reserved
Two implants side by side
3 Copyright © 2011 Idondivi, Inc. All rights reserved
Cut the wings that interfere.
4 Copyright © 2011 Idondivi, Inc. All rights reserved
The buccal wings could be positioned against each other in a narrow situation, it
will create a 3 mm inter implant distance
5 Copyright © 2011 Idondivi, Inc. All rights reserved
The lingual wings are cut, and adapted to the curvature
6 Copyright © 2011 Idondivi, Inc. All rights reserved
A minimum of two connection spots are needed, so now the RIR needs to be
reinforced with Acrylic
7 Copyright © 2011 Idondivi, Inc. All rights reserved
Finished surgical guide
8 Copyright © 2011 Idondivi, Inc. All rights reserved
Once the rotation blocks are in place the system is fully rigid
9 Copyright © 2011 Idondivi, Inc. All rights reserved
Two implants side by side in a free end situation
10 Copyright © 2011 Idondivi, Inc. All rights reserved
Opposing wings are cut
11 Copyright © 2011 Idondivi, Inc. All rights reserved
In case of a free end situation , additional acrylic is used to create sufficient
rigidity within the surgical guide..