Upload
vanhanh
View
213
Download
1
Embed Size (px)
Citation preview
6
Multiple Display Control Protocolfor SyncMaster 400P(Pn)460P(Pn) 320P
Copyright © 2003 2005 Samsung Elect ronics Co., Ltd
November 11, 2005
7
Multiple Display Control Protocolfor SyncMaster 400PX(n)460PX(n) 320PX
Copyright © 2003 2006 Samsung Elect ronics Co., Ltd
2006 - 02 - 01
Copyright noticeThis document is Copyright © Samsung Electronics, Co. - all rights reserved.
Contact InformationDisplay S/W Group, VD Business DivisionSamsung Electronics Co., Ltd
Address : 416, Maetan-3Dong, Yeongtong-Gu,
Suwon City, Kyungki-Do, Korea442-742
Telephone : 82-31-277-2340
E-mail : [email protected]
Author: Display S/W, Video Display Division.
Status: AuthoredWritten for: Technical Writer, Programmer, Developer
Summary: This document contains the protocol for Mult iple Display C ontrol V ersion 1.0
History:
Version Date Content Author Approved by1. 0 2005. 01. 05. Protocol for Multiple Display Control JANG SEUNG HO
1.1 2005. 01. 07. Add Safety Lock JANG SEUNG HO
Display S/W, VD Business Team, Samsung Electronics
1.2 2005. 01. 18. Add Video Wall LEE JAE YOUN
1.3 2005. 01. 26. modify Maintenance Control JANG SEUNG HO
This document is the technological property of Samsung Electronics Company and the copyingand/or use of this document without permission of the Tech Document Department are prohibited.
1.4 2005. 03. 11. modify Baudrate, PIP Control LEE JAE YOUN
1.5 2005. 07. 04. Add Commands JANG SEUNG HO
7
November 11, 2005
1.6 2005. 11. 11. Add Command ( Screen Scroll On) JANG SEUNG HO
2006 - 02 - 01
1.7 2006. 02. 01. Add Command PARK HYO SUN
1) Connecting
- You can assign an ID number here from 0 to 99 to each TV or Monitor connected.
The same number cannot be assigned to more than one unit.
The ID numbers do not necessarily need to be assigned sequentially.
Fig. 1-1 Connecting the PC, TV or a Monitor
Display S/W, VD Business Team, Samsung Electronics
3Display S/W, VD Business Team, Samsung Electronics
and responds with ACK at the same
time.
9600
Therefore, the operation of each set should be checked after this process.
Display S/W, VD Business Team, Samsung Electronics
51 OSD On/Off 70
52 Picture Mode Set 71
53 NR Mode Set 73
54 Panel Lock 5F
Display S/W, VD Business Team, Samsung Electronics
55 PC Color Tone Control 75 0x01 ~ 0x03
56 Auto AutoAdjustment 76
57 All Keys Lock 77
58 Screen Scroll 88
Sound Select Control 7
Video Wall Control 0x4F -
Auto Lamp Control 7 -
Manual Lamp Control 8
Safety Screen Control B
Video Wall Mode Control C
Panel Lock 5
Direct Channel Control 60
Channel Up/Down 61
OSD On/OFF 70
P. Mode Control 71
S. Mode Control 72
NR Mode Set 73
PC Color Tone Control 75
Auto AutoAdjustment 76
58 All Keys Lock 77
-
4
3
7
59 SRS TSXT Control 78
60 Film Mode 79
61 Signal Balance 7A
62 SB Phase R 7B
63 SB Phase G 7C
64 SB Phase B 7D
65 SB Gain 7E
66 SB Sharpness 7F
67 Safety Screen On 88 1 5
Display S/W, VD Business Team, Samsung Electronics
0x00 ~ 0x030x10 ~ 0x13
9Display S/W, VD Business Team, Samsung Electronics
H Time, M Time : 0xFF when the current time is not set on the monitor.
10Display S/W, VD Business Team, Samsung Electronics
H Time, M Time : 0xFF when the current time is not set on the monitor.
11Display S/W, VD Business Team, Samsung Electronics
H Time, M Time : 0xFF when the current time is not set on the monitor.
6Display S/W, VD Business Team, Samsung Electronics
Safety Screen Interval(PerHour,0(0ff)~10) which is set up in TV/Monitor
Interval l Interval
Second l Second
6
3
ScreenInterval creen
ScreenInterval Safety Screen Interval (Per Hour,0(0ff)~10) which is set up in TV/Monitor.
ScreenTime Safety Screen Time (Per Second,0(0ff)~5) which is set up in TV/Monitor.
15 16 17
ScreenType V.Wall WallMode
ScreenType Safety Screen Type (3 ~ 6) which is set up in TV/Monitor.
Display S/W, VD Business Team, Samsung Electronics
MagicNet is available only on models with the MagicNet function.
PC BNC DVI HDCP AV S-Video Comp. TV
PC X X X X ○ ○ ○
BNC X X X X ○ ○ X
DVI X X X X ○ ○ ○ ○
○
○
HDCP X X X X ○ ○ ○ ○
AV ○ ○ ○ ○ X X X X
S-Video ○ ○ ○ ○ X X X X
Component ○ X ○ ○ X X X X
Not available in MagicNet.
TV ○ ○ ○ ○ X X X X
Display S/W, VD Business Team, Samsung Electronics
50
3
Display S/W, VD Business Team, Samsung Electronics
Not available in MagicNet.
Set 2 X 2 3 X 3 4 X 4 1 X 5 5 X 1 1 X 2 2 X 1
OFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00
No. 1 0x11 0x21 0x31 0x41 0x51 0x61 0x 1
No. 2 0x12 0x22 0x32 0x42 0x52 0x62 0 72
No. 3 0x13 0x23 0x33 0x43 0x53
No. 4 0x14 0x24 0x34 0x44 0x54
No. 5 0x25 0x35 0x45 0x55
... ... ...
No. 9 0x29 0x39
... ...
No. 16 0x40
x
7
53
46)
Display S/W, VD Business Team, Samsung Electronics
TypeIntervalSecond
B
B Type Interval Second
Type Interbal Second
Safety Screen Status
Safety Screen
Data 13456
TypeScrollPixelBarEraser
Scroll Type which will be set up into TV/Monitor. (3~6)Scroll Interval which will be set up into TV/Monitor.( 0(off)~10)Scroll Time which will be set up into TV/Monitor.( 0(off)~5)
5 B
B
TypeIntervalSecond
Same as above.Same as above.Same as above.
55
Get Safety Lock Status
Set Safety Lock Enable/Disable
Display S/W, VD Business Team, Samsung Electronics
56
49) Panel Lock
● Function
The Computer turns the Panel function Key Lock of TV/Monitor On/Off.
Available even when the power is turned OFF..
● Get Panel Lock Status
Header CommandID
Data Length CheckSum0xAA 0x5F 0
● Set Panel Lock
Header CommandID
Data Length Data 1 CheckSum0xAA 0x5F 1 Panel Lock
Panel Lock : The Panel Key Lock On/Off code for the TV / Monitor.
1 Lock
0 Unlock
● Ack
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'A' 0x5F Panel Lock
Panel Lock : Same as above
● Nak
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'N' 0x5F ERR
ERR : Error Code that shows the type of the error that occurred.
SEC-VD-DSW External Control - 0008
Display S/W, VD Business Team, Samsung Electronics
57
)
● Function
Personal Computer controls the Channel of TV.
P_NUM : Program Number which will be set up into TV/Monitor (0~99) CH_NUM : Channel Number which will be set up into TV/Monitor (1~125)
P_NUM : Same as above.CH_NUM : Same as above.
● Get Channel
Header CommandID
Data Length CheckSum0xAA 0x60
0x60 0x04
0
● Set Panel Lock
Header CommandID
Data Length
CheckSum
0xAA 0 0 P_NUM
DATA 1 DATA 2 DATA 3 DATA 4
CH_NUM
P_NUM CH_NUM
0x06ID
Data Length
‘A’ 0x80 0 0
● Ack
Header Command
0xAA 0xFF
● Nak
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'N' 0x5F ERR
CheckSum
ERR : Error Code that shows the type of the error that occurred.
SEC-VD-DSW External Control - 0008
Display S/W, VD Business Team, Samsung Electronics
Ack/Nak r-CMD Val 1 Val 2
Val 4 Val 3
58
51) Channel Up/Down (TV Only)
● Function
Personal Computer changes the Channel of TV with Up/Down
● Get Channel Up/Down Status
Set Channel Up/Down Lock
Header CommandID
Data Length CheckSum0xAA 0x61 0
●
Header CommandID
Data Length Data 1 CheckSum0xAA 0x61 1
: Channel Up/Down code which will be set up into TV/Monitor
1 Down
0 Up
● Ack
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'A' 0x61
: Same as above
● Nak
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'N' 0x61 ERR
ERR : Error Code that shows the type of the error that occurred.
SEC-VD-DSW External Control - 0008
Display S/W, VD Business Team, Samsung Electronics
Ch UpDown
Ch UpDown
Ch UpDown
Ch UpDown
52) OSD On/Off
● Function
The Computer turns the OSD of TV/Monitor On/Off.
When the OSD is ON, the OSD is displayed on the screen.
When the OSD is OFF, the OSD is not displayed on the screen.
● Get OSD Enable Status
59
Header CommandID
Data Length CheckSum0xAA 0x70 0
● Set OSD Enable/Disable
Header CommandID
Data Length Data 1 CheckSum0xAA 0x70 1 OSD
OSD : The OSD On/Off code for the TV / Monitor.
1 OSD Enable
0 OSD Disable
● Ack
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'A' 0x70 OSD
OSD : Same as above
● Nak
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'N' 0x70 ERR
ERR : Error Code that shows the type of the error that occurred.
SEC-VD-DSW External Control - 0008
Display S/W, VD Business Team, Samsung Electronics
60
53) P. Mode Control
● Function
The Computer changes the Picture Mode of TV / Monitor.
● Get PMode Status
Header CommandID
Data Length CheckSum0xAA 0x71 0
● Set PMode
Header CommandID
Data Length Data 1 CheckSum0xAA 0x71 1 PMode
PMode : The Pictur Mode Code for the TV / Monitor.
Source Data Mode
AV
S-VideoComponent
HDCP
0x00 Dynamic
0x01 Standard
0x02 Movie
0x03 Custom
PC
BNC
DVI
MagicNet
0x10 Entertain
0x11 Internet
0x12 Text
0x13 Custom
● Ack
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'A' 0x71 PMode
PMode : Same as above
● Nak
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'N' 0x71 ERR
ERR : Error Code that shows the type of the error that occurred.
SEC-VD-DSW External Control - 0008
Display S/W, VD Business Team, Samsung Electronics
54) S. Mode Controlt
● Function
Personal Computer changes the Sound Mode of TV/Monitor.
● Get SMode Status
Header CommandID
Data Length CheckSum0xAA 0x72 0
0xAA 0x72 1
● Set NR Mode
Header CommandID
Data Length Data 1 CheckSumSM d
SMod
o e
SMode
e
: Error Code that shows the type of the error that occurred.
SEC-VD-DSW External Control - 0008
Display S/W, VD Business Team, Samsung Electronics
Data Mode
0x00 Standard
0x01 Music
0x02 Movie
0x03 Speech
0x04 Custom
SMode
: The NR Mode On/Off code for the TV / Monitor.
● Ack
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'A' 0x72
: Same as above
● Nak
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'N' 0x73 ERR
ERR
61
55) NR Mode Set(AV, S-Video, Component, DVI(HDCP) Only)
● Function
The Computer changes the Digital NR Mode.
● Get NR Mode Status
Header CommandID
Data Length CheckSum0xAA 0x73 0
● Set NR Mode
Header CommandID
Data Length Data 1 CheckSum0xAA 0x73 1 NR Mode
NR Mode : The NR Mode On/Off code for the TV / Monitor.
1 NR Mode On
0 NR Mode Off
● Ack
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'A' 0x73 NR Mode
NR Mode : Same as above
● Nak
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'N' 0x73 ERR
ERR : Error Code that shows the type of the error that occurred.
SEC-VD-DSW External Control - 0008
Display S/W, VD Business Team, Samsung Electronics 62
56) PC Color Tone Control (PC, BNC, DVI Only)
● Function
The Computer changes the Color Tone of TV/Monitor.
PC, BNC, DVI Only
● Get Color Tone Status
63
Header CommandID
Data Length CheckSum0xAA 0x75 0
● Set Color Tone
Header CommandID
Data Length Data 1 CheckSum0xAA 0x75 1 Color Tone
Color Tone : The Color Tone Value Code for the TV / Monitor (1 ~ 3)
Source Data Mode
PC
DVI
BNC0x03 Warm
0x02 Normal
0x01 Cool
0x00 Custom
● Ack
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'A' 0x75 Color Tone
Color Tone : Same as above
● Nak
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'N' 0x75 ERR
ERR : Error Code that shows the type of the error that occurred.
SEC-VD-DSW External Control - 0008
Display S/W, VD Business Team, Samsung Electronics
57) Auto AutoAdjustment
● Function
The Computer adjusts the Auto Adjustment of TV/Monitor Enable/Disable.
Auto Adjustment is only available when the power is turned On.
● Get A.Adjustment Status
64
Header CommandID
Data Length CheckSum0xAA 0x76 0
● Set A.Adjustment
Header CommandID
Data Length Data 1 CheckSum0xAA 0x76 1 A.Adjustment
A.Adjustment : The Auto Adjustment Value Code for the TV / Monitor.
1 Enable
0 Disable
● Ack
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'A' 0x76 A.Adjustment
A.Adjustment : Same as above
● Nak
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'N' 0x76 ERR
ERR : Error Code that shows the type of the error that occurred.
SEC-VD-DSW External Control - 0008
Display S/W, VD Business Team, Samsung Electronics
58) All Keys Lock
● Function
The Computer switches both the Remote Control and the Panel Key Lock function ON/OFF.
Available even if the power is turned OFF.
● Get All Key Status
65
Header CommandID
Data Length CheckSum0xAA 0x77 0
● Set All Key Lock/Unlock
Header CommandID
Data Length Data 1 CheckSum0xAA 0x77 1 All Key
All Key : The Key Lock On/Off Code for the TV / Monitor.
1 Lock
0 Unlock
● Ack
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'A' 0x77 All Key
All Key : Same as above
● Nak
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'N' 0x77 ERR
ERR : Error Code that shows the type of the error that occurred.
SEC-VD-DSW External Control - 0008
Display S/W, VD Business Team, Samsung Electronics
5 )
● Function
Personal Computer enables ON/OFF of SRS TSXT for TV/Monitor.
● Get SRS TSXT Status
Header CommandID
Data Length CheckSum0xAA 0x78 0
● Set
Header CommandID
Data Length Data 1 CheckSum0xAA 0x78 1
: SRS TSXT Code which will be set up into TV/Monitor
1 SRS ON
0 SRS OFF
: Error Code that shows the type of the error that occurred.
SEC-VD-DSW External Control - 0008
Display S/W, VD Business Team, Samsung Electronics
SRS
SRS
SRS
SRS TSXT
● Ack
Header CommandID
Data Length Ack/Nak Val 1 CheckSum0xAA 0xFF 3 'A' 0x78 SRS
r-CMD
: Same as above
● Nak
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'N' 0x78 ERR
ERR
66
60)
● Function
Personal Computer enables ON/OFF of Film Mode for TV/Monitor.
● Get Film Mode
Film Mode
Film Mode ON
Film Mode OFF
Status
Header CommandID
Data Length CheckSum0xAA 0x79 0
● Set
Header CommandID
Data Length Data 1 CheckSum0xAA 0x79 1
: Film Mode Code which will be set up into TV/Monitor
1
0
● Ack
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'A' 0x79
: Same as above
● Nak
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'N' 0x79 ERR
ERR : Error Code that shows the type of the error that occurred.
SEC-VD-DSW External Control - 0008
Display S/W, VD Business Team, Samsung Electronics
FMode
FMode
FMode
FMode
Film Mode Control
67
61)
● Function
Personal Computer enables ON/OFF of Signal Balance for TV/Monitor.
● Get Signal Balance
Signal Balance
Status
Header CommandID
Data Length CheckSum0xAA 0x7A 0
● Set
Header CommandID
Data Length Data 1 CheckSum0xAA 0x7A 1
Signal Balance Code which will be set up into TV/Monitor
1
0
● Ack
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'A' 0x79
Same as above
● Nak
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'N' 0x79 ERR
ERR : Error Code that shows the type of the error that occurred.
SEC-VD-DSW External Control - 0008
Display S/W, VD Business Team, Samsung Electronics
SBalance
SBalance
SBalance
SBalance
Signal Balance (PC, BNC, Only)
Signal Balance ON
Signal Balance OFF
68
62)
● Function
Personal Computer changes the Phase R value of Signal Balance for Monitor.
● Get SBPhaseR
SBPhaseR
Status
Header CommandID
Data Length CheckSum0xAA 0x7B 0
● Set
Header CommandID
Data Length Data 1 CheckSum0xAA 0x7B 1
Phase R value which will be set up into Monitor. Code(0~100)
● Ack
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'A' 0x7B
Same as above
● Nak
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'N' 0x7B ERR
ERR : Error Code that shows the type of the error that occurred.
SEC-VD-DSW External Control - 0008
Display S/W, VD Business Team, Samsung Electronics
SBPhaseR
SBPhaseR
SBPhaseR
SBPhaseR
SB Phase R ( PC, BNC, Only)
69
63)
● Function
Personal Computer changes the Phase G value of Signal Balance for Monitor.
● Get SBPhaseG
SBPhaseG
Status
Header CommandID
Data Length CheckSum0xAA 0x7C 0
● Set
Header CommandID
Data Length Data 1 CheckSum0xAA 0x7C 1
Phase G value which will be set up into Monitor. Code(0~100)
● Ack
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'A' 0x7C
Same as above
● Nak
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'N' 0x7C ERR
ERR : Error Code that shows the type of the error that occurred.
SEC-VD-DSW External Control - 0008
Display S/W, VD Business Team, Samsung Electronics
SBPhaseG
SBPhaseG
SBPhaseG
SBPhaseG
SB Phase G (PC, BNC Only )
70
64)
● Function
Personal Computer changes the Phase B value of Signal Balance for Monitor.
● Get SBPhaseB
SBPhaseB
Status
Header CommandID
Data Length CheckSum0xAA 0x7D 0
● Set
Header CommandID
Data Length Data 1 CheckSum0xAA 0x7D 1
Phase B value which will be set up into Monitor. Code(0~100)
● Ack
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'A' 0x7D
Same as above
● Nak
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'N' 0x7D ERR
ERR : Error Code that shows the type of the error that occurred.
SEC-VD-DSW External Control - 0008
Display S/W, VD Business Team, Samsung Electronics
SBPhaseB
SBPhaseB
SBPhaseB
SBPhaseB
SB Phase B ( PC, BNC Only )
71
65)
● Function
Personal Computer changes the Gain value of Signal Balance for Monitor.
● Get SBGain
SBGain
Status
Header CommandID
Data Length CheckSum0xAA 0x7E 0
● Set
Header CommandID
Data Length Data 1 CheckSum0xAA 0x7E 1
Gain value which will be set up into Monitor. Code(0~100)
● Ack
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'A' 0x7E
Same as above
● Nak
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'N' 0x7EE ERR
ERR : Error Code that shows the type of the error that occurred.
SEC-VD-DSW External Control - 0008
Display S/W, VD Business Team, Samsung Electronics
SBGain
SBGain
SBGain
SBGain
SB Gain ( PC, BNC Only )
72
66)
● Function
Personal Computer changes the Sharpness value of Balance for Monitor.
● Get SBSharpness
SBSharpness
SBSharpness
SBSharpness
SBSharpness
SBSharpness
Status
Header CommandID
Data Length CheckSum0xAA 0x7F 0
● Set
Header CommandID
Data Length Data 1 CheckSum0xAA 0x7F 1
Sharpness value which will be set up into Monitor. Code(0~100)
● Ack
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'A' 0x7F
Same as above
● Nak
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'N' 0x7F ERR
ERR : Error Code that shows the type of the error that occurred.
SEC-VD-DSW External Control - 0008
Display S/W, VD Business Team, Samsung Electronics
SB Sharpness ( PC, BNC Only )
73
74
) Screen Scroll On
● Function
Allows Scroll function for current monitor screen
● Get Safety Screen Status
● Set Safety Screen
Header CommandID
Data Length Data 1 CheckSum0xAA 0x88 1 Second
Second : Time to function Scroll for TV/Monitor. (Per Second, 1 ~ 5)
● Ack
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'A' 0x88 Second
ScrollTime : Same as above
● Nak
Header CommandID
Data Length Ack/Nak r-CMD Val 1 CheckSum0xAA 0xFF 3 'N' 0x88 ERR
ERR : Error Code that shows the type of the error that occurred.
SEC-VD-DSW External Control - 0008
Display S/W, VD Business Team, Samsung Electronics