MULTIMEDIA SOLUTIONS - Fujitsu

MULTIMEDIA SOLUTIONS

DVB/MPEG-2 & GRAPHICCONTROLLER PRODUCTS

PRODUCT OVERVIEW

MULTIMEDIA

CONTENTS

Copyright © 2006 Fujitsu Limited Tokyo, Japan and Fujitsu Microelectronics Europe GmbH. All Rights Reserved.

The information contained in this document has been carefully checked and is believed to be entirelyreliable. However Fujitsu and its subsidiaries assume no responsibility for inaccuracies.

The information contained in this document does not convey any licence under the copyrights, patentrights or trademarks claimed and owned by Fujitsu. Fujitsu Limited and its subsidiaries reserve theright to change products or specifications without notice.

No part of this publication may be copied or reproduced in any form or by any means or transferredto any third party without the prior consent of Fujitsu.

Designed and produced in the UK. Printed on environmentally friendly paper.

Introducing Business Unit Multimedia 1

Business Unit Multimedia at Fujitsu Microelectronics 2

Front-End for Digital Satellite Television 3-4

MPEG-2 Decoder for Digital Television 5-7

MPEG-2 Encoder 8

Introduction to Graphic Display Controllers 9

MB86290A ‘Cremson’ 10-11

MB86291 ‘Scarlet’ 12

MB86292 ‘Orchid’ 13

MB87P2020 ‘Jasmine’ 14

MB86293 ‘Coral Q’ 15

MB86294 ‘Coral B’ 16

MB86295 ‘Coral P’ & MB86296 ‘Coral PA’ 17

MB86276 ‘Lime’ 18

MB86297 ‘Carmine’ 19

Product Roadmap 20

Evaluation Boards 21

Graphic Controller Comparison Tables 22-23

European Distributors & Representatives 24-25

European Sales Offices Back Cover

OpenTV is a trademark of OpenTV, Inc., NDS is trademark or registered trademark of NDS Limited

I2C is a registered trademark of Philips

Macrovision is a registered trademark of MacrovisionCorporation

All Trademarks acknowledged

01

INTRODUCING BUSINESS UNIT MULTIMEDIAFujitsu Microelectronics Europe’sBusiness Unit Multimedia, based atthe company’s headquarters nearFrankfurt, Germany, offers customersadvanced multimedia products fordigital TV and set-top boxes as wellas graphic display controllers forsuch applications as car navigation,mobile terminals and industrialapplications.

In addition to the range ofproducts offered by the Business UnitMultimedia, an experienced support& development team is in place towork closely with customers on theirmultimedia systems projects.

Fujitsu Microelectronics Europe isa major supplier of semiconductorproducts to the European and globalmarket. The company’s mainbusiness focus is on providingsystems solutions to the multimedia,networking/telecommunications,mobile communications, andautomotive markets.

Fujitsu offers a broad range ofsemiconductor devices, includingtelecommunications ICs, RF devices,MPEG encoders & decoders,microcontrollers, graphic displaycontrollers, microprocessors andFCRAMTM. The company is also aleader in colour plasma displaypanels.

MaidenheadRegional Office & Mixed Signal Division

LevalloisRegional Office

MünchenRegional Office & ASIC Design Centre

MilanRegional Office

LangenFujitsu Microelectronics EuropeHeadquarters - ASIC, MCU, RF andMultimedia Design Centres

Fujitsu Microelectronic Europe’s new headquarters in Langen.

02

MULTIMEDIA

BUSINESS UNIT MULTIMEDIA AT FME

The following components areoffered from the Business UnitMultimedia:

● Single-package front-end solutions for digital satellite television

● MPEG-2 decoders for set-top box applications

● Single-chip MPEG-2 encoders including audio encoders, video encoders & system multiplexers

● Graphic display controllers for embedded solutions

At the heart of Fujitsu’s Business UnitMultimedia is its development centrein Frankfurt, which designs andsupports semiconductor multimediasolutions, calling on the skills andexpertise located in other Fujitsudesign centres in Europe. The MPEG-2 decoder for digital television,SmartMPEG, was designed here, acomplete API library was created,reference designs are available andcustomers are using it successfully in their digital TV products, such asset-top boxes. The SmartMPEG is thethird generation MPEG-2 decoder forset-top box applications and isespecially designed to reduce systemcost of the end-product.

A Fujitsu API software library isavailable, which enables thecustomers a fast and easyimplementation of the SmartMPEGinto their products. The Centre has aset of resources on call, for bothhardware and software development.The support group assists customersto design-in multimedia componentsinto their end-products.

For complex components, theBusiness Unit Multimedia can alsosupply development kits tocustomers. These kits include anevaluation board, software anddocumentation.

A car infotainment system using Fujitsu Multimedia components.

03

Fujitsu Microelectronics Europecontinues the success story with oneof the most advanced, highlyintegrated single-chip solutions fordigital satellite broadcasting, whichcombines a tuner, a QPSKdemodulator and a Forward ErrorCorrection Unit into one 120-pinpackage.

Many set-top box manufacturersaround the world already use the wellknown MB86A15. It offers aseries of benefits over previous-generation discrete QPSK NIMs,including much smaller size,significantly reduced powerconsumption and lower cost.

The chip integrates a Zero IFTuner, a QPSK Demodulator andForward Error Correction (FEC)circuitry, making it ideal for DVB-Sand DSS transmissions, without theuse of tuning-diodes, expensivecapacitance and inductive elements.

This means that the only externalcomponents needed to design andbuild a complete working front-end

for a set-top box are the F-connector,a 4MHz crystal, and some resistorsand simple capacitors.

In addition, the MB86A15internally generates the control signalfor DiSEqC 1.x, the standard forinterfacing between the satellite dishand receiver, which makes it possibleto switch between an array of dishes.

The DiSEqC 1.x standard requiresa protocol involving very strict timing,and this is supported by the new chipdirectly in hardware, optimising

performance and reducing theamount of software needed.

Much lower power consumptionis an attractive feature of theMB86A15, which operates fromsupply voltages of just 2.5, 3.3 and5V. This contrasts with previousgeneration designs in which thetuning diode required a 30V supply. Maximum power dissipation of thenew device is 1.5W (at 45Mbaud),and thanks to this it is available in acompact LQFP 120-pin package.

FRONT-END FOR DIGITAL SATELLITE TELEVISION

QPSKDemodulator

Zero IFTuner

FowardError

Correction

SCL, SDA& ADR(2:0)

Parallel andSerial TransportStream Output

LNB Control:14/18V and 22kHz

DiSEqC 1.X

(950 to 2150MHz)

DiSEqC

RF Input TS Output

Lock Signal

I2CQPSK Silicon Tuner (MB86A15)

SmartMPEGAudioDAC

SDRAM64Mbit

XTAL

IR

I2C

SM1 UPI

DAC 1-5

VideoRGB& YC

L

R

S/P-DIF

Flash8Mbit

QPSKSilicon Tuner

I2S

IR Rx

TS2

XTAL

From Satellite Dish(950 to 2150MHz)

QPSK silicon tuner (MB86A15) evaluation board.

QPSK silicon tuner (MB86A15) block diagram.

Typical configuration using the QPSK silicon tuner (MB86A15): Simple set-top box for satellite reception.

04

MULTIMEDIA

Monitor software for PC for the QPSK silicon tuner (MB86A15).

FRONT-END FOR DIGITAL SATELLITE TELEVISIONThe low power consumption will helpto further reduce costs and makedesign and implementation easier.

Key Features

● Multi-Chip-Package (MCP), using Fujitsu’s advanced MCPtechnology

● For logic module: CMOS 0.25µm technology

● For RF module: BiCMOS technology

● Includes Zero IF Tuner, QPSK Demodulator and Forward Error Correction

● DVB-S (SCPC, MCPC)) and DSS compatible

● No external inductors or variable capacitance diodes required

● Supply voltages: +5, +3.3 and +2.5V, (30V for tuning is not required)

● Input frequency range: 950 to 2150MHz

● Input signal level per channel: typ. -75 to -10dBm

● Symbol rates: 1 to 45Mbaud● Carrier capture range: ±5MHz● Automatic IQ detection● Automatic detection of Viterbi

code rates (DVB: 1/2, 2/3, 3/4, 5/6, 7/8)

● I2C® bus interface● DiSEqC® 1.x compatible● Built-in carrier frequency offset

monitor (via I2C bus interface)

● C/N Monitoring function (via I2C bus interface)

● Total power consumption: less than 1.5W (at 45Mbaud, decreases at lower baud rates)

● Package: 120-pin plastic LQFP (FPT-120P-M21)

● Ambient temperature: 0 to +70°C

Development Kit available whichincludes:

● Evaluation Board with RF input and transport stream output

● Application Programming Interface software (API) in source code will be provided by Fujitsu

● Evaluation board including monitor software for PC is available. This software offers graphical BER display, bar graphs for signal strength/quality and transponder administration including DiSEqC control.

Key Applications

● Digital set-top boxes for satellite reception

● Television Set incorporating a digital satellite reception (IDTV)

● Network Interface Module (NIM) for Satellite reception

● PC Cards, which use the DVB-S Standard for Data Broadcasting

● Head-end stations

05

The third generation MPEG-2 decodercalled SmartMPEG (MB86H2x) is

MPEG-2 DECODER FOR DIGITAL TELEVISION

ideally suited for medium- and low-end set-top box applications. TheSmartMPEG includes nearly all of therequired features for these set-top boxapplications, requiring only a singleSDRAM and a FLASH memory foroperation.

The SmartMPEG is the first FujitsuMPEG device to use a shared memoryarchitecture. In this sharedarchitecture, a single SDRAM is usedfor MPEG decoding, OSD graphic

generation and the system processor.Performance of the embedded ARCTangent-A4 CPU running with130MHz is very high and afterinitialisation it is completely availablefor other tasks like OSD processingor SI data analysis. This highperformance increase is achievedthrough an increased clock frequency,additional instructions, a 2kB datacache, a 4kB instruction cache and afaster memory system.

SmartMPEG evaluation board.

[email protected] MHzTangent-A4

4kI-Cache

2kD-Cache

WatchDog

PowerDown

IRQCTRL

3Timers

SharedMemoryInterface

MPEG-2 VideoDecoder

MPEG Audio DecoderS/P-DIF Output Unit

ResizingTXT Insertion

DisplayController(4 layer)

Digitalencoder

(PAL/NTSC/SECAM)

WSS / VPSInsertion

CC / VBIDInsertion

AdjustableRGB De-Matrix

ITU-R656Output

SmartMPEG Internal Bus @ 130.5MHz

DPLL BufferManager

DVB Descramblers

TS Demultiplexers

HDD / IDECtrl

BootROM

Chip SelectCtrl

UniversalProcessorInterface

IR Rx IR Tx GPIO GPI GPO

I2C UART 2 SmartCard PWM 7-Seg

Ctrl

TS1Par / Ser

SDRAM(64Mbit…1Gbit)

S/P-DIF(Dolby Digital Bitstream)

I2S (Audio) ITU-R656 ITU-R656

Analogue O/P:CVBS, YC, RGB

YCRBR, Audio R/L

16/32bit

TS2Par / Ser 27.0 MHz

NOR / NAND FlashHDD / IDE / CI IRQ / I2C / 2 Smart Card / GPIO / 7-Segment Control /

UART / IR in /IR out / PWM / Keyboard Mon

TS3Intern

DAC5DAC4DAC3DAC2DAC1

SmartMPEG block diagram.

06

MULTIMEDIA


Application

AdditionalCustomerSoftware

FM – LibraryFujitsu Middleware API

FD – LibraryFujitsu Driver APIOS Kernel

FH – LibraryFujitsu Hardware API

MPEG Decoder Hardware

Adap

tatio

n La

yerRTOS API

Application programming interface (API) of SmartMPEG using an RTOS.

The specialised SDRAM interface iscapable of connecting to both 16- and32-bit SDRAM devices, allowingselection of the optimal componentsfor each application. A 32-bit deviceneed only be used when extremelyhigh OSD-graphic performance isrequired.

The on-chip digital PLL (instead ofexternal VXCO), the 7-segmentcontroller and the option to use thevideo DACs for audio output, allowcustomers to reduce the cost for low-end applications to an absoluteminimum. This high level of integrationwill enable customers to achieve oneof the most efficient solutions formedium- and low-end set-top boxesavailable on the market today.

There are derivatives available fromthe SmartMPEG, which includefeatures for special applications. For

example an NDS ICAM, which allowsthe SmartMPEG to be used in anetwork, where the NDS scramblingalgorithm is used. The SmartMPEGfor extended temperature makes itideally suited for automotiveapplications. For certain PayTVNetworks a Macrovision version isalso available.

Fujitsu’s Application Interfacesoftware (FAPI) enables customers aneasy start for their own development.The FAPI includes many low leveldriver and middle level examples. Theblock diagram above shows theFH_LIB (Fujitsu Hardware Library)offering direct access to each registerin the device. The FD_LIB (FujitsuDriver Library) includes the driver set,like I2C, IC-Card and Video Driver. Inaddition, the middleware and theapplication are running.

The basic FAPI runs with or withoutan operating system.

Some interactive APIs are portedto the SmartMPEG. This allowscustomers to build set-top boxes orIDTVs incorporating OpenTV, MHEG-5 or NDS Middleware.

Key Features

● CMOS 0.18µm technology● MPEG2 video ISO/IEC 13818-2

([email protected]@ML)● MPEG audio layer 1/2● 32-bit RISC CPU (ARC Tangent A4

@ 130MHz) with extensions● 4k I-cache / 2k D-cache● Three timers / watchdog / power-

down mode● Shared memory interface

(SDRAM, 16/32-bit data), 64Mbit...1Gbit

● Universal processor interface (IDE, NAND/NOR FLASH, Common Interface)

● Two transport stream decoders (decoding/recording) including DVB descrambler

● Flexible MPEG video resizing (factor 1/16 to 2)

● Display controller with up to four true-colour graphic or CLUT layers

● Teletext / WSS / CC / VBID insertion

● PAL/NTSC/SECAM digital encoder● RGB De-matrix (RGB or YCrCb

output)

07


SmartMPEGAudioDAC

SDRAM64Mbit

SmartCard

XTAL

QPSKSilicon Tuner

7-SegmentDisplay IR

HDD

I2C

SmartCard IF

SMI UPI

DAC 1-5

VideoRGB& YC

L

R

7-Seg-CTRL

S/P-DIF

XTAL

Flash8Mbit

QPSKSilicon Tuner

I2S

IR Rx

TS2

TS1

Typical configuration using the MPEG-2 decoder SmartMPEG – digital video recorder using two front-ends and ahard disk drive.

● Control of brightness, contrast and colour saturation of RGB and YCrCb output

● 5 video DACs @ 10 bit● ITU-R 656 video input/output● S/P DIF output for

PCM/AC3/MPEG● UART/2 x Smart Card

IF/I2C/GPIO● 7-segment LED controller for

5 digits● Infra Red receiver/transmitter● PWM Output● On-chip DPLL, requiring only

27MHz crystal● Typical power consumption:

typ. 700mW (1.8V device with 3.3V I/O)

● Typical power consumption in Standby mode: typ. 100mW (1.8V device with 3.3V I/O)

● Low Profile QFP208 Package or BGA256 Package

● Ambient Temperature Range: 0 to +70°C (-40 to +85°C for MB86H22)

Derivatives of SmartMPEG

● MB86H20 – SmartMPEG StandardVersion in QFP208 Package

● MB86H22 – SmartMPEG for ext. temperature range -40 to +85°C inQFP208 Package

● MB86H23 – SmartMPEG with Macrovision support (Ver 7.1.L1) in BGA256 Package

● MB86H24 – SmartMPEG for Conditional Access Applications (including NDS ICAM in BGA256 Package)

● MB86H25 - SmartMPEG for Free-to-Air Applications in QFP208 Package

Development Kit available which includes:● Evaluation Board with transport

stream input and analogue video output, single 12V supply, USB for debug

● Application programming interface software (FAPI) will be provided by Fujitsu

● Software example in Flash

Key Applications

● Digital set-top boxes for satellite, cable and terrestrial reception

● Free-to-Air and PayTV applications

● Television Set incorporating a digital reception unit (IDTV)

● Personal / digital video recorder applications

● Automotive/mobile/handheld applications

● Head-end stations

MPEG-2 ENCODER

Host/SDRAMI/F Controller

Serial I/FController

Controller(32bit RISCProcessor)

BootROM

VideoEncoder

AudioEncoder

TBC

PLL

SystemEncoder

27MHz

54MHz

Clock Input(27MHz)

AudioInput I/F

SDRAM I/F

VideoInput I/F

Host/SDRAM I/F

Serial I/F

Bit StreamOutput Port

MB86391

MPEG-2 encoder (MB86391) block diagram.

SmartMPEG

AudioDAC

Flash8Mbit

SDRAM64Mbit

SDRAM64Mbit

SDRAM64Mbit

MPEGEncoder

VideoADC

AudioADC

XTAL

QPSKSilicon Tuner

XTAL

PLL

7-SegmentDisplay IP Rx IP Tx

HDD

TS1

I2C

TS2

GPIO(CTRL)

SMI UPI

DAC 1-5

VideoRGB& YC

I2SL

R

IR TxIR Rx7-Seg-CTRL

VideoYC &CVBS

L

R

S/P-DIF

Typical configuration using the MPEG-2 encoder (MB86391) – personal video recorder using one satellite front-end, MPEG-2 decoder and MPEG-2 encoder.

MPEG-2 encoder (MB86391) evaluation board.

The MB86391 is a full MP@MLcompliant MPEG-2 encoder thatintegrates video, audio and systemencoders on a single chip. The MPEG-2encoder takes advantage of the high-performance MPEG-2compression algorithm developed byFujitsu. This device is a combination of hardware and software processed byan internal SPARClite CPU. It isexpected to be a key component forrealising higher performance and more compact digital audio-visualequipment, such as disk recorders,camcorders, video communication, etc.

Key Features

● Single chip encoder● Video encoder

• MPEG-1 (ISO/IEC11172-2)• MPEG-2 MP@ML encoding

function (ISO/IEC13818-2)• NTSC and PAL video formats• Maximum bit-rate is 15Mbps• Video input interface: ITU-R 656

● Audio encoder• MPEG-1 Audio layer-1/2 encoding

function (ISO/IEC11172-3)• Maximum bit-rate is 448kbps• Audio Input Interface: I2S

● System multiplex• Output format is selection of PS,

TS and MPEG-1 System08

MULTIMEDIA

• Constant or variable bit-rate (CBR / VBR)

• Maximum bit-rate is 20Mbps● External memory: SDRAM:

4x(1Mx16 bit) or 2x(2M x 32 bit)● Time base corrector (TBC)● Internal 32-bit RISC processor● Simple control of encoding

parameters via serial port● Power consumption: typ. 550mW● Package: HQFP-208● Operating temperature:

-20 to +85°C

Key Applications

● Video distribution systems● Car entertainment systems● Video conference systems● Digital video recorder● D-VHS recorder● D-STB, Personal Video Recorder

(PVR)● Video disk recorder● MPEG-2 PC encoder card● Surveillance systems● Head-end stations

09

INTRODUCTION TO GRAPHICDISPLAY CONTROLLERSFujitsu’s new family of graphic displaycontrollers will optimise solutions forembedded graphic applications suchas car navigation and mobileinformation terminals. The products in this family have numerousfunctions that are state-of-the-art tographic controllers today, but havebeen specially optimised for the areaof embedded systems. This meansthat, in addition to many 2D and 3Drendering functions, there is a flexiblelayer concept, support for screenresolution of up to UXGA (1600 x1024) and further features which areof particular interest in the area ofnavigation, such as alpha-blendingand anti-aliasing. All derivatives havea CPU interface to enable directconnection of embedded CPUs andMCUs. Fujitsu offers a range ofgraphic display controllers withdifferent levels of integration forvarious applications.

In-car navigation is a key target application for Fujitsu’s graphic display controllers.

10

MULTIMEDIA

MB86290A ‘Cremson’ is a 2D/3Dgraphics controller, optimised forapplications in car navigation systemsand mobile information processingterminals. Adopting varioussophisticated functions, such as flat orGouraud shading, bi-linear texturemapping, and Z-buffering, ‘Cremson’offers a high-speed, superior-performance 3D graphics functionality. Moreover, anti-aliasing, concavedpolygon rendering and fast line drawfeatures are also included, allowingsmooth and sophisticated-qualityrendering. As a result, ‘Cremson’performs high-quality renderingoperations, with similar quality toleading-edge PC graphics, but withlower power consumption. ‘Cremson’supports a 64 bit-wide externalmemory interface. This interface isdriven at the same 100MHz frequencyas its internal operation, to support the large-memory bus bandwidth that is needed to perform the high-performance graphics operationsdescribed above. Also, in order tosupport various kinds of systemconfigurations, ‘Cremson’ offers aconfigurable host interface for fourtypes of CPUs (Fujitsu FR30, HitachiSH3/4, and NEC V832) withoutexternal glue logic.

To address the especially complexWindow configurations of carnavigation systems, ‘Cremson’ offers 4layers of overlay planes. These layers

are (from top to bottom): C (console)layer, W (window) layer, M (middle)layer and B (base) layer. All layers canbe rendered in 16 bit/pixel colour(65,536 colours displayed at a time)or rendered in 8-bit indirect colour

An important feature of ‘Cremson’ and all subsequent members of the family is that graphical information can bedisplayed on four overlapping, independent layers.

C (Console) layer– 8, 16 bit/pixel– Applied to show switches and panel displays

M (Middle) layer– 8, 16 bit/pixel– Supplement for Base, can be divided into two

zones

W (Window) layer– 16 bit/pixel (Y:U:V = 2:1:1)*– Applied to overlay input video image

B (Base) layer– 8, 16 bit/pixel– Fundamental map display layer, can be divided

into two zones* To be supplied by 2nd generation product withembedded DRAM. This layer can be adopted as a3rd graphics layer as well.

MB86290A ‘CREMSON’

The new GDC’s support for 3D graphics makes possible features such as ‘bird-view’ perspectives.

mode (256 selected out of 262,144colours). The colour palette can be defined separately to the C layer and B and M layers. A transparent colour option is used toblend the layers directly.

11

MB86290A ‘CREMSON’Layer Concept

For screen separation in wide-screendisplays, the M and B layers can besplit into two separate segments (leftand right). This feature is useful whentwo different reduced map scales aredisplayed side by side. Of course, allthese layers and segments can bescrolled independently. In addition, twohardware cursors are supported.

An ‘alpha-flag’ per pixel issupported for the C-layer. This featureis useful for blending the C layercolour with all the layer contentsbelow, providing a variable transparentcolour effect (‘alpha-blending’). ‘Cremson’ consists of 4 blockmodules: host interface block, externalmemory interface block, displaycontrol block, and 2D/3D renderingblock. An internal 64-bit bus calledPixel bus connects these modules.Also, the host interface block isconnected to each of the other 3blocks independently to avoid displayand/or rendering operations when thehost CPU attempts to access thesemodules.

2D/3DRendering

Engine

DisplayController

DAC

H/V syncColourkeyExternal

Bus ofFR CPU

D(0:31)

A(2:24)

MD(0:63)

MA(0:13)

HostInterface

ExternalMemory

Controller

64MbitSDRAM

or16MbitSGRAM

Pixe

l Bus

MB86290A ‘Cremson’ uses an internal 64 bit-wide pixel bus to connect the main hardware blocks: Host interface,memory controller, display controller and rendering engine.

Key Features

● CMOS 0.25µm technology● Display resolutions up to

1024 x 768● 4 layers of overlay display

(bottom 2 layers are both split into separate segments)

● RGB analogue output (high speed DAC)

● Includes various kinds of 2D/3D graphic acceleration functions

● Built-in alpha blending, anti-aliasing and chroma-keying

● Up to 32MB external graphic memory (SDRAM) 64 bit-wide@ 100MHz

● Configurable CPU-interface for embedded CPUs/MCUs

● Supply voltage 3.3V (I/O), 2.5V (Internal)

● QFP-240 Package● Temperature range -40 to +85°C

12

MULTIMEDIA

HostInterface

External VideoInterface Controller

2D/3DRendering

Engine

DisplayController DAC

Pixe

l BusExternal

Bus ofFR CPU

MemoryInterfaceController Geometry

Engine

D(0:31)

A(2:24)

YUV

Digital RGB

Embedded SDRAM16Mbit

MB86291A ‘Scarlet’ adds 16Mbit embedded SDRAM, video input functions and a geometry processor.

MB86291A ‘Scarlet’ is an enhancedversion of MB86290A ‘Cremson’ whichadds 16Mbit embedded SDRAM, videoinput functions and a geometryprocessor. The concept of displaylayers, 2D/3D rendering functions andthe display controller features are takenfrom ‘Cremson’ MB86290A.

Scarlet is optimised for applicationsin car navigation systems, whichrequire video-input features, consumerinformation processing systems andarcade game applications.

Scarlet has 16Mbit of embeddedSDRAM with high bandwidth(100MHz). No external SDRAM devicesare required for graphic memory. Theexternal video input can be used tocapture video signals according to thestandard RBT-ITU656 YUV4:2:2 format.

Picture-in-picture functions aresupported to display the video image(the W-layer is dedicated for thatpurpose). To adjust the dimensions ofthe video-input format, a flexible videoscaler is integrated.

A geometry processor, capable ofperforming numeric calculations forgraphical operations is included.

Supported functions are Affin-conversions, model-view projections,3D-clipping operations and others. All drawing functions, display list-formats and software functions arecompatible to the ‘Cremson’MB86290A.

An additional RGB digital interfaceoffers flexible display connections.

Key Features

● CMOS 0.25µm technology● Display resolutions up to

1024 x 768● 4 layers of overlay display (bottom

2 layers are both split into separatesegments)

● Digital video input● Video scaler● I2C interface● Geometry processor● RGB analogue output (high speed

DAC)

● RGB digital output (8 bit x 3)● Includes various kinds of 2D/3D

graphic acceleration functions● Built-in alpha blending,

anti-aliasing and chroma-keying● Embedded 16Mbit SDRAM

graphic memory ● Configurable CPU-interface for

embedded CPUs MCUs● Supply voltage 3.3V (I/O), 2.5V

(Internal)● QFP-208 Package● Temperature range -30 to +85°C

MB86291A ‘SCARLET’

‘Scarlet’ offers some of the most advancedfunctionality yet developed for use in automotivenavigation and multimedia information terminals.

13

MB86292 ‘ORCHID’

MB86292 ‘Orchid’ is another versionof MB86291 ‘Scarlet’, which hasexternal video memory connection upto 32MB for those applications wherethe 2MB embedded SDRAM ofMB86291 ‘Scarlet’ is not sufficient. Allfunctions of ‘Scarlet’ including videoinput, scaler and a geometryprocessor are also available on‘Orchid’. The concept of displaylayers, 2D/3D rendering functions andthe display controller features aretaken from ‘Cremson’ and ‘Scarlet’.‘Orchid’ is optimised for applicationsin car navigation systems that requirevideo input features, consumerinformation processing and arcadegame functions. The external memoryinterface can be connected to FujitsuFCRAMTM or SDRAM-type memorydevices. The external video input canbe used to capture video signalsaccording to the standard RBT-ITU656YUV4:2:2 format. Picture-in-picturefunctions are supported to display thevideo image (the W-layer is dedicatedfor that purpose). To adjust thedimensions of the video input format,a flexible video scaler is integrated. Ageometry processor, capable of

HostInterface


2D/3DRendering

Engine

DisplayController

Pixe

l BusExternal

Bus ofFR CPU

GeometryEngine

D(0:31)

A(2:24)

YUV

MD(0:63)

MA(0:13)

ExternalMemory

Controller

Digital RGB

32MByteSDRAM

orFCRAM

MB86292 ‘Orchid’ offers all the functions of ‘Scarlet’ but allows SDRAM or FCRAM™ memory up to 32MB.

performing numeric calculations forgraphical operations, in included.Supported functions are Affin-conversions, model-viewprojections, 3D-clipping operationsand others. ‘Orchid’ has only RGBdigital outputs for displayconnections. All drawing functions,display list-formats, and softwarefunctions are compatible to the‘Cremson’ MB86290A and ‘Scarlet’MB86291.

Key Features

● CMOS 0.25µm technology ● Display resolutions up to

1024 x 768 ● 4 layers of overlay display

(bottom 2 layers are both split into separate segments)

● Digital video input ● Video scaler

‘Orchid’ is optimised for applications in carnavigation systems.

● I2C interface ● Geometry processor ● RGB digital output (8 bit x 3) ● Includes various kinds of 2D/3D

graphic acceleration functions ● Built-in alpha blending,

anti-aliasing and chroma-keying ● External SDRAM or FCRAMTM

interface for up to 32MB graphic memory



● QFP-256 Package ● Temperature range -40 to +85°C

14

MULTIMEDIA

MB87P2020A ‘JASMINE’

MB87P2020A ‘Jasmine’ is a memberof Fujitsu’s graphic controller familyfor low-cost embedded systems withperformance requirements forcompact automotive or consumerapplication, user interfaces or controlpanels where a high integration offunctions is required. No externalmemory devices are required forgraphic memory because of the 8Mbitembedded SDRAM.

The MB87P2020A support almostall LCD panel types (digital oranalogue interface) and CRTs or otherprogressive scanned monitors/displays, which can be connected viathe analogue RGB output.

The 2D rendering functions arecomposed out of standard primitivessuch as lines, polylines, rectangles,etc., as well as some special functionslike decompression of RLE-bitmapsand text display. 4 layers of overlaycan be displayed simultaneously.A video input interface was developedwhich allows acceptance of moreformats (include YUV and RGB) andwhich is compatible to a wider rangeof video decoder chips. Aprogrammable converter matrix (YUV

FR HostInterface

DAC

Pixe

l Bus

ExternalBus of

FR CPU

MemoryInterfaceController

D(0:31)

A(0:20)

RGB/YUV

Digital RGB

H/VsyncBacklight

Video InterfaceController

Pixel Processor(2D)

Display,Sync,

BacklightController

ULB

PP

V/C

Embedded SDRAM8Mbit

GPU

MB87P2020A ‘Jasmine’ is fully compatible with the MB87J2120 ‘Lavender’ and uses the same internal architecture.No external memory devices are required for graphic memory because of the 8Mbit embedded SDRAM.

to RGB) allows writing of the YUVformats to layers and to convert backto RGB for scanning.

In addition, a gamma correctiontable was added to allow adjustmentof the picture characteristicsaccording to the connected displayrequirements and the colour look-uptable that can hold up to 512 entries.

‘Jasmine’ is optimised to work asa companion chip for the Fujitsu 32-bit RISC devices.

Key Features

● CMOS 0.25µm technology● Flexible display controller for

almost all standard LCD panels● 4 layers of overlay display (out of

16 logical layers)● RGB analogue output (DAC) ● RGB digital output● Includes 2D graphic acceleration

functions● Gamma correction

‘Jasmine’ is optimised to work as a companion chipfor the Fujitsu 32-bit RISC devices.

● Embedded SDRAM graphic memory 8Mbit (1MByte)

● Digital video input (RGB and YUV formats)

● CPU-interface for embedded 32/16 bit CPUs/MCUs

● Supply voltage 3.3V (I/O), 2.5V (internal)

● QFP208 Package● Temperature range -40 to +85°C

15

L0 Layer

L1 Layer

L2 Layer

L3 Layer

L4 Layer

Background Colour

Alpha PlaneAxL1 + (1-A)xL2

MB86293 ‘CORAL Q’The new ‘Coral’ device family offers anincreased internal operating frequencyof 166MHz, a 64 bit memory bus,support for six independent layers,advanced alpha-blending features andenhanced video input facilities. Thehigher internal frequency of 166MHz(400MHz for display dot clocks)enables the rendering engine of thedevices to achieve a factor 10improvement in texture mapping anddrawing image quality compared to theprevious graphic controller devices.

The enhanced bandwidth allows amuch greater rate of access forgraphics elements, and deliversimproved scanning functions at higherdisplay resolutions. The ‘Coral Q’ and‘Coral B’ devices are compatible withhost CPU buses including Fujitsu FR,Hitachi SH3 and SH4 and NEC V83without external glue logic. All devicesare binary compatible with previousgeneration graphic display controllers,like the ‘Cremson’, ‘Orchid’ and‘Scarlet’ devices. This helps to speed-up developments and save costsbecause existing software modules(e.g. map renderer) and drivers can beused without any modifications.

An enhancement to 2D-drawingfunctions is the integration of a linedepth display facility, which clearlydefines the correct respective level ofintersecting map lines. Enhancedhardware design also providesimprovements in pattern lineperformance.

The ‘Coral’ device address up to64MB of external SDRAM or FCRAMTM

memory @ 133MHz and are capable of

adjusting picture sizes to optimise theavailable memory space. All layers canhave a colour depth of 8-, 16- or 24bits/pixel and can be changed inposition, size and priority. Themaximum logical layer size has beenincreased to 4096 x 4096 pixels.

Key Features

● CMOS 0.18µm technology ● Display resolutions up to 1280 x 768 ● 6 layers of overlay display

(Windows)

● Alpha Plane● Geometry processor ● RGB digital output (8 bit x 3) ● Includes various kinds of 2D/3D



interface @ 133MHz for up to 64MB graphic memory



● QFP-256 package ● Temperature range -40 to +85°C

2D/3DRendering

Engine

DisplayController

Digital RGB

ExternalBus of

FR CPU

D(0:31)

A(2:25)

MD(0:63)

MA(0:14)

HostInterface

ExternalMemory

Controller

Pixe

l Bus

GeometryEngine64MByte

SDRAMor

FCRAM

MB86293 ‘Coral Q’ has a 6-layer structure and a geometry processor that perform co-ordinate conversions at 166MHz.

‘Coral’ family layer structure.

16

MULTIMEDIA

MB86294 ‘CORAL B’‘Coral B’ adds video input to thefeatures of ‘Coral Q’ and is available ina BGA package. The video input iscapable of accepting TV tuner, DVDplayer or camera signals in PAL orNTSC video formats (ITU656 format).Video pictures of diverse resolutionand frame frequency rate, in eitherprogressive or interlaced modes, canbe grabbed, scaled and displayedpicture-in-picture.

The latest automotive andconsumer appliance screens areincreasing resolution to achieve betterreadability. They demand improvedpicture quality to match, for exampleDVD quality. In order to meet thesedemands, ‘Coral’ integrates a newvideo input up-scaling facility, whichallows a full-screen mode ofmultimedia pictures at largeresolutions to be displayed. Bothup-scaling and down-scaling can beset independently in horizontal andvertical directions in pixel or lineresolutions.

Using the Alpha-map features ofthe ‘Coral’ architecture, a video picturecan be blended smoothly togetherwith rendered graphics. The alphamap can be freely assigned to any ofthe six layers and allows theassignment of 8 bits per pixel,enabling each pixel to be mixed tocontrol transparency to a very highdegree of accuracy. In addition, alllayers can be blended at a fixed ratioof 256 levels.

2D/3DRendering

Engine

DisplayController

DAC

Digital RGB

ExternalBus of

Host CPU

D(0:31)

A(2:25)

MD(0:63)

MA(0:14)

HostInterface

ExternalMemory

Controller

Pixe

l Bus

GeometryEngine


Analogue RGB

YUV

64MByteSDRAM

orFCRAM

MB86294 ‘Coral B’ offers video input with upscaling, in addition to the new ‘Coral’ family features.

To enhance bit BLT (Bit BlockTransfers) operations, this featurecan now be combined withalpha-mapping. With this function,any bitmap can be copied from anysource location (CPU- orVideo-memory) and can be copiedonto a layer with an independentalpha-map. Software routines thatmake use of this function can greatlyimprove image quality (for exampleanti-aliasing over a movingbackground).

Key Features



(Windows) ● Alpha Plane● Digital Video input

● Video Scaler (up/down scaling)● I2C interface● Geometry processor ● RGB digital output (8 bit x 3) ● RGB analogue output● Includes various kinds of 2D/3D



interface @ 133MHz for up to 64MB graphic memory



● BGA-256 package ● Temperature range -40 to +85°C

17

MB86295 ‘CORAL P’ & MB86296 ‘CORAL PA’‘Coral P/PA’ is an enhanced version of ‘Coral B’ with a PCI host interface and anew video input controller. Any CPU witha 32-bit PCI V2.1-compliant hostinterface can be directly connected to‘Coral P/PA’. The device includes bothmaster and slave functions and aninternal DMA controller for multi-bursttransfers of large quantities of databetween all combinations of PCI dataspace and ‘Coral’ internal areas.

Additional functions provided by thehost interface are general purpose I/Opins and a serial interface. The externalvideo input of ‘Coral P/PA’ accepts dataconforming to the standards RBT-ITU656,RBT-ITU601, RGB666 and RGB888. Thisallows video signals of various sources tobe displayed together with generatedgraphics. The video input is capable ofaccepting TV tuner, DVD player or camerasignals in PAL or NTSC video formats. Inaddition, rendered graphics from anyother display controller can be used asvideo input source.

The video stream is read, modifiedand written to a video buffer memorycompletely independent of the displayscanning process. Video pictures ofdiverse resolution and frame frequencyrate, in either progressive or interlacedmodes, are able to be grabbed, scaledand displayed picture-in-picture. As with‘Coral B’, ‘Coral P/PA’ integrates a newvideo input up-scaling facility, which nowallows a full-screen mode of multimediapictures at large resolutions to bedisplayed. Both up-scaling and down-scaling can be set independently inhorizontal and vertical directions in pixelor line resolutions.A set of general I/O pins and a serialinterface are also included for simpleexternal resource control.

Key Features

● CMOS 0.18µm technology ● Display resolutions up to 1280 x 768 ● 6 layers of overlay display

(Windows) ● Alpha Plane● Digital Video input (various formats)● Video Scaler (up/down-scaling)● I2C interface● Geometry processor ● RGB digital output (8 bit x 3) ● RGB analogue output● Includes various kinds of 2D/3D



interface @ 133MHz for up to 64Mb graphic memory

● PCI 32-bit V2.1 host interface● GPIO inputs/outputs● Serial interface● Supply voltage 3.3V (I/O),

1.8V (Internal) ● BGA-256 Package ● Temperature range -40 to +85°C

The new MB86296 ‘Coral PA’ is aredesigned and feature-expandedversion of ‘Coral P’. This chip has thefollowing additional features:● Direct RGB666 and RGB888 video

input without conversion to YUV422● Dual display feature (independent

contents on two connected screens) ● Colour-Space conversion method

selectable as programmable option ● Brightness, Contrast, Saturation

control for video input ● PCI bandwidth will increase to

approximately. 70MBytes/s ● New ROM for Geometry Engine

(enhanced functions) ● Pixel-clock delay of display output

is programmable ● PCI bus clock can be used as clock

input ● Video texture mapping

(RGB555 mode) ● Simultaneous up- and down-scaling ● Enhanced pixel clock output ● 100% Pin- and Function-compatible

to ‘Coral P’

2D/3DRendering

Engine

DisplayController

DAC

Digital RGB

PCIBUS

INTERFACE

D(0:31)

A(2:25)

MD(0:32)

MA(0:13)

HostInterface

ExternalMemory

Controller

Pixe

l Bus

GeometryEngine


Analogue RGB

RGB

YUV

SIO GPIO I2C

64MByteSDRAM

orFCRAM

MB86295 ‘Coral P’ block diagram.

18

MULTIMEDIA

MB86276 ‘LIME’

‘Lime’ is a low-end extension to theFujitsu Graphic Controller Family for2D applications. This chip is based onthe Coral family core functions, andoptimised for 2D rendering.

The display controller, renderingengine and video input unit are takenfrom the successful ‘Coral PA’ but thefloating point co-processor and all3D-functions have been taken out.Also, the CPU interface is optimisedfor more CPU connections and thedevice has some functions to supportsmall footprint graphic applications.‘Lime’ is 100% binary-compatible tothe ‘Cremson’ and ‘Coral’ families.

Key Features



(Windows) ● Alpha Plane● Digital Video input (various

formats)● Video Scaler (up/down scaling)

● I2C Master/Slave interface● RGB digital output (8 bit x 3)● Dual-Display support (2xRGB666

output)● Includes various kinds of 2D



interface @ 133MHz for up to 64MBytes graphic memory

2DRendering

Engine

DisplayController

Digital RGB

HOST BUSINTERFACE

MD(0:31)

MA(0:14)

PCI/HostInterface

ExternalMemory

Controller

Pixe

l Bus Video input

and scaler YUV/RGB

64MByteSDRAM

orFCRAM

D(0:31)

A(0:23)

MB86276 ‘Lime' block diagram.

The new graphic controller ‘Lime’ is the perfectchoice for 2D-optimised graphic systems based onthe ‘Coral’ family.

● Standard host interface for embedded CPUs/MCUs (32-bit/16-bit)

● GPIO inputs/outputs● Serial interface● Supply voltage 3.3V (I/O), 1.8V

(Internal) ● BGA-256 package ● Temperature range -40 to +85°C

Mode 1 HST 32-bit D(31:16) RGB out 8/8/8 RGB in 6/6/6

Mode 2 HST 32-bit D(31:16) RGB out 8/8/8 GPIO (4:0) N/A VI (7.0)

Mode 3 HST 16-bit RGB out 8/8/8 RGB out 6/6/6 GPIO (3) N/A VI (7.0)

Mode 4 HST 16-bit RGB out 6/6/6 RGB out 6/6/6 N/A RGB in 6/6/6

Lime Host IF multiplexing modes

19

MB86297 ‘CARMINE’

‘Carmine’ is a high-end extension tothe Fujitsu Graphic Controller family.This chip will carry a brand newgraphics core which will deliver 10xmore performance as ‘Coral PA’. Allrelevant blocks inside the chip areredesigned and will be optimised forhigh-end in-car multimediaapplications. ‘Carmine’ will be 100%compatible to OpenGL ES 1.1. Alltransforming and lighting functionscan be executed in hardware.

As a new feature, ‘Carmine’ willhave two independent display outputunits. Both can generate individualdisplay timings and resolutions. Foreach display channel, 8 layers and 4alpha-planes are available. ‘Carmine’also features two independent videoinput channels - each of them cancapture independent YUV and RGBsignals.

Key Features

● CMOS 90nm technology● Internal and memory frequency:

266MHz● Display resolutions up to

1280 x 1024● 2 x 8 layers of overlay display

(windows)● 2 x 4 alpha planes and constant

alpha value for each layer● Dual-digital video input (various

formats)● Video scaler (up/down scaling)● Brightness, Contrast, Saturation

control● Dual-display output

GeometryEngine

X64bit266MbpsDDR IF

RGB

RenderingEngine

Graphics Local Bus

CPU I/F(PCI 66MHz)

Vide

o Ca

ptur

e

Disp

lay

Cont

rolle

r

Memory Controller (DDR 266bps)

Bus Matrix (266MHz)

RGB

BT656BT656 orDRGB666

MB86297 ‘Carmine' block diagram.

The ‘Carmine’ GDC is the first device of its kind to be fabricated in 90nm technology.

● Rendering engine for 2D/3D graphic acceleration functions

● OpenGL ES 1.1 compatible● Geometry Processor● External DDR-SDRAM interface

@ 266MHz● PCI66 host interface● BGA-543 Package● Temperature range -40 to +85°C

20

MULTIMEDIA

New enhanced graphics displaycontrollers (GDCs) for various kindsof digital audio/video applications, inwhich multimedia functions will beintegrated together are planned assuccessive products. In addition, weplan to integrate a CPU core andvarious I/O functions and define asingle-chip solution for car navigationapplications. As Fujitsu's primaryGDC product line, the car navigationfamily will be extended further.

Roadmap of graphic controller devices. Under development

PRODUCT ROADMAP

21

EVALUATION BOARDSFor application development supportand functional evaluation, a numberof evaluation boards are availablefrom Fujitsu: PCI adaptor cards withall graphics controllers from the‘Cremson’, ‘Coral’ and ‘Carmine’families are available, which enablethe evaluation of the device featuresdirectly from a Windows PC. For this,a Windows 98/NT/Windows 2000driver and a map driver are bundledwith this adaptor card in order to getstarted, enabling easy programmingof the devices from a Windows-baseddevelopment environment. Also, thesource code of various applicationexamples is included. Although the main purpose is softwaredevelopment it can be mounteddirectly to an embedded system.

‘Cremson’ Starterkit Series

The ‘Cremson’ Starterkit is a modularevaluation board, which provides astand-alone embedded environment.The kit hardware consists of twoparts, a CPU module, which carriesa Fujitsu 32-bit RISC MCUMB91F36X and a set of sub-boardsfor the graphic controllers ‘Cremson’,‘Scarlet’, ‘Jasmine’ and ‘Lime’.In order to facilitate the appropriateconfiguration for the applicationrequirements, the system allows easy interchange of the CPU type or the graphic controller.

The interconnection between bothmodule boards is the host-CPU bus

interface. All functions of the graphicdevices and the CPU are present onpin headers, jumpers or switches,which allow the addition of hardwareextensions.

The new CPU Board, equippedwith MB91F369, MB901302, andMB91F467 allows creation and fulldebugging of applications underSoftune Workbench directly! This

‘Carmine’ evaluation board enables designers to build up specific embedded applications.

A starterkit is available for the GDCs, enabling designers to build up specific embedded applications with thetargeted processor and GDC together.

CPU-module has additionally 2MBdebugging RAM on board, which isrequired for the monitor debugger.

22

MULTIMEDIA

GRAPHIC CONTROLLER COMPARISON TABLES

Device Name Chip Max Resolution 2D 3D Texture Number Layer Alpha Drawing Alpha Dual Display RGB Digital Frequency (typ. @60Hz) Rendering Rendering Mapping of Layers Blending Blending Output Output

MB87P2020 Jasmine 64MHz 800 x 600 x - - 4 - - - x

MB86290A Cremson 100MHz 1024 x 768 x x up to 4 4-bit flag 4-bit alpha - -512 x 512 blending for drawing

top layer

MB86291A Scarlet 100MHz 1024 x 768 x x up to 4 4-bit flag 4-bit alpha - x512 x 512 blending for drawing

top layer

MB86292 Orchid 100MHz 1024 x 768 x x up to 4 4-bit flag 4-bit alpha - x512 x 512 blending for drawing

top layer

MB86293 Coral Q 166MHz 1024 x 768 x x up to 6 8-bit alpha-plane 8-bit alpha - x4096 X 4096 for 1 layer + 8-bit drawing +

flag blending for Alpha BLTall layers

MB86294 Coral B 166MHz 1024 x 768 x x up to 6 8-bit alpha-plane 8-bit alpha - x4096 X 4096 for 1 layer + 8-bit drawimg +


MB86295 Coral P 166MHz 1280 x 768 x x up to 6 8-bit alpha-plane 8-bit alpha - x4096 X 4096 for 1 layer + 8-bit drawing +


MB86296 Coral PA 166MHz 1280 x 768 x x up to 6 8-bit alpha-plane 8-bit alpha x x4096 X 4096 for 1 layer + 8-bit drawing + (same res)


MB86276 Lime 133MHz 1280 x 768 x - up to 6 8-bit alpha-plane 8-bit alpha x 2x4096 X 4096 for 1 layer + 8-bit drawing + (same res)


MB86267 Carmine 266MHz 1280 x 1024 x x up to 8 x 2 4 x 8-bit alpha-plane 8-bit alpha x 2x4096 X 4096 for 1 layer + 8-bit drawing + (indep res)


Evaluation Board Description Device

MB86290EB01 PCI board for PCs (WinNT/2000) MB86290A Cremson

MB86291EB01 PCI board for PCs (WinNT/2000) MB86291A Scarlet

MB86292EB01 PCI board for PCs (WinNT/2000) MB86292 Orchid

MB8629XEB01+MB86293EB01* PCI board combination for PCs (WinNT/2000)* MB86293 Coral Q

MB8629XEB01+MB86294EB01* PCI board combination for PCs (WinNT/2000)* MB86293 Coral B

MB86295EB01 PCI board for PCs (WinNT/2000) MB86295 Coral P

MB86296EB01 PCI board for PCs (WinNT/2000) MB86296 Coral PA

MB86297EB01 PCI board for PCs (WinNT/2000) MB86297 Carmine

CREMSON-STARTERKIT-CRM Subboard for Modular Starterkit MB86290A Cremson

CREMSON-STARTERKIT-ROSE Subboard for Modular Starterkit MB86291A Scarlet

CREMSON-STARTERKIT-JAS Subboard for Modular Starterkit MB87P2020A Jasmine

CREMSON-STARTERKIT-LIME Subboard for Modular Starterkit MB86276 Lime

CREMSON-STARTERKIT-CPU CPU Module for the ‘Cremson Modular Starterkit’ MB91F362 as host CPU

CREMSON-STARTERKITCPU369 CPU Module for the ‘Cremson Modular Starterkit’ MB91F369 as host CPU + Debug RAM

STARTERKIT MB91302 CPU Module for the ‘Cremson Modular Starterkit’ MB91302 as host CPU + Debug RAM

SK-91F467D-208PFV CPU Module for the ‘Cremson Modular Starterkit’ MB91F467D as host CPU + Debug RAM

* Combination of motherboard (MB8629XEB01) and daughterboard (MB86293EB01 or MB86294EB01) – both items have to be ordered separately Order information : Please specify the item according to the ‘Evaluation board’ or ‘Device’ columns.

Comparison Table – Tools

Comparison Table – Devices

23

RGB Analogue Video Video Input Video Other Video Geometry CPU Temperature Package ProductOutput Input Formats Scaler I/F Memory Processor Interface Range Status

x x YUV/ - - embedded - FR -40 to +85 QFP208 MPRGB (1MByte)

x - - - - external - FR,SH3/4, -40 to +85 QFP240 MP(up to V850

32MByte)

x x YUV down I2C embedded Version 1 FR,SH3/4, -30 to +85 QFP208 MPscaling (2MByte) V850

- x YUV down I2C external Version 1 FR,SH3/4, -40 to +85 QFP256 MPscaling (up to V850

32MByte)

- - - - - external Version 2 FR,SH3/4, -40 to +85 QFP256 MP(up to V850

64MByte)

x x YUV up + down I2C external Version 2 FR,SH3/4, -40 to +85 BGA256 MPscaling (up to V850

64MByte)

x x YUV/RGB up + down I2C external Version 2 PCI -40 to +85 BGA256 MP(RGB as scaling SIO (up to

converted GPIO 64MByte)YUV)

- x YUV/RGB up + down I2C external Version 3 PCI -40 to +85 BGA256 MP(RGB full scaling SIO (up to

resolution) GPIO 64MByte)

- x YUV/RGB up + down i2C external - 16 or 32-bit -40 to +85 BGA256 MP(RGB full scaling SIO (up to Host (various) Middle

resolution) GPIO 64MByte) and serial 2006

- 2x YUV/RGB up + down i2C external DDR Version 4 PCI66 -40 to +85 BGA543 MP(RGB full scaling (up to including Middle

resolution) 128MByte) Lighting Engine 2006

EUROPEAN DISTRIBUTORS & REPRESENTATIVES

24

Ineltek GmbH ErfurtGeraerstr. 33D-99099 Erfurt Tel: +49 (0)361 34 64 28 0Fax: +49 (0)361 34 64 28 1

Rutronik Elektronische Bauelemente GmbHHead officeIndustriestrasse 2D-75228 IspringenTel: +49 (0) 72 31/801-0Fax: +49 (0) 72 31/82282

Rutronik Elektronische Bauelemente GmbHFalkenberg ParkParadiesstrasse 206 bD-12526 BerlinTel: +49 (0) 30/72 32 08-93Fax: +49 (0) 30/72 32 08-95

Rutronik Elektronische Bauelemente GmbHBeratgerstrasse 36D-44149 DortmundTel: +49 (0) 2 31/9 50 36-0Fax: +49 (0) 2 31/9 50 36-31

Rutronik Elektronische Bauelemente GmbHMittelstrasse 3D-01936 Königsbrück (Dresden)Tel: +49 (0)3 57 95/3 96-0Fax: +49 (0)3 57 95/3 96-50

Rutronik Elektronische Bauelemente GmbHFlughafenstrasse 4D-99092 ErfurtTel: +49 (0) 3 61/2 28 36 30Fax: +49 (0) 3 61/2 28 36 31

Rutronik Elektronische Bauelemente GmbHHeinz-Beusen-Stieg 5D-22926 Ahrensburg (Hamburg)Tel: +49 (0) 41 02/80 39-0Fax: +49 (0) 41 02/80 39-50

Rutronik Elektronische Bauelemente GmbHAmselstrasse 33D-68307 MannheimTel: +49 (0)621/ 76 21 26-0Fax: +49 (0)621/ 76 21 26-17

Rutronik Elektronische Bauelemente GmbHLilly-Reich-Strasse 7D-31137 HildesheimTel: +49 (0) 51 21/74 18-0Fax: +49 (0) 51 21/74 18-18

Rutronik Elektronische Bauelemente GmbHLandsberger Strasse 478D-81241 MünchenTel: +49 (0) 89/88 99 91-0Fax: +49 (0) 89/88 99 91-19

Rutronik Elektronische Bauelemente GmbHSüdwestpark 10/12D-90449 NürnbergTel: +49 (0)9 11/6 88 68-0Fax: +49 (0)9 11/6 88 68-90

Rutronik Elektronische Bauelemente GmbHGothaer Strasse 2D-40880 RatingenTel: +49 (0) 21 02/99 00-0Fax: +49 (0) 21 02/99 00-19

GreeceGR-17778 Tavros (Athens)1, Anaxagora Str.Tel: +30 210 34 14 300Fax: +30 210 34 14 304

HungaryH-1037 BudapestMontevideo u. 2/BTel: +36 1 436 72 29Fax: +36 1 436 72 20

Ineltek Hungary Kft.Madach ter 4H-1071 BudapestTel: +36 1 327 84 07Fax: +36 1 327 84 43

Rutronik Magyarország KftFehérvári út 89-95H-1119 BudapestTel: +36 (0)1/371 06 66Fax: +36 (0)1/371 06 67

Rutronik SA6 Mail de l’EuropeF-78170 La Celle St Cloud(Paris Ile de France)Tel: +33 (0) 1/30 08 34 40Fax: +33 (0) 1/30 08 34 37

Rutronik SAAllée de la Détente BP16 ZIF-86361 Chasseneuil du PoitouCedex (Poitiers)Tel: +33 (0) 5/49 52 88 88Fax: +33 (0) 5/49 52 88 96

Rutronik SA3D rue de ParisImmeuble Atalis 2F-35510 Cesson Sévigné, (Rennes)Tel: +33 (0) 2/23 45 14 40Fax: +33 (0) 2/ 23 45 06 53

GermanyEBV Elektronik GmbHD-07806 Neustadt / OrlaZum Mühlenberg 9Tel: +49 (0)36481 244-0Fax: +49 (0)36481 244-99

EBV Elektronik GmbHD-12277 Berlin-MariendorfKitzingstr. 15-19Tel: +49 (0)30 74 70 05-0Fax: +49 (0)30 74 70 05-55

EBV Elektronik GmbHD-30938 BurgwedelIn der Meineworth 21Tel: +49 (0)5139 80 87-0Fax: +49 (0)5139 80 87-70

EBV Elektronik GmbHD-41564 KaarstAn der Guempgesbruecke 7Tel: +49 (0)2131 96 77-0Fax: +49 (0)2131 96 77-30

EBV Elektronik GmbHD-65205 Wiesbaden, Borsigstr. 7Tel: +49 (0)6122 80 88-0Fax: +49 (0)6122 80 88 99

EBV Elektronik GmbHD-71229 Leonberg, Neue Ramtelstrasse 4Tel: +49 (0)7152 30 09-0Fax: +49 (0)7152 75 95 8

EBV Elektronik GmbHD-85586 PoingIm Technologiepark 2-8Tel: +49 (0)8121 77 4-0Fax: +49 (0)8121 77 4-4 22

Glyn GmbH & Co. KGAm Wörtzgarten 8D-65510 Idstein/Ts.Tel: +49 (0)6126 59 02 22Fax: +49 (0)6126 59 01 11

Glyn GmbH & Co.KGRingstrasse 88D-41334 Nettetal Tel: +49 (0)2157 12 42 25Fax: +49 (0)2157 12 42 11

Ineltek GmbH (Headquarters)Hauptstraße 45D-89522 HeidenheimTel: +49 (0)7321 93 85 0Fax: +49 (0)7321 93 85 95

Ineltek Nord GmbHLindenallee 84D-22869 SchenefeldTel: +49 (0)4083 96 04 0Fax: +49 (0)4083 96 04 33

Ineltek Mitte GmbHHauptstr. 13D-63834 SulzbachTel: +49 (0)6028 99 38 0Fax: +49 (0)6028 99 38 38

Ineltek GmbH SüdAm Fügsee 21D-82418 MurnauTel: +49 (0)8841 47 77 5Fax: +49 (0)8841 26 60

FranceEBV Elektronik GmbHF-13854 Aix-en-Provence Cedex 3115, Rue Nicolas LedouxImmeuble Hemiris, Bàtiment ATel: +33 (0)4 42 39 65 40Fax: +33 (0)4 42 39 65 50

EBV Elektronik GmbHF-31313 Labège Cedex (Toulouse)Actys Bâtiment 2, Voie 3, BP 348Tel: +33 (0)5 61 00 84 61Fax: +33 (0)5 61 00 84 74

EBV Elektronik GmbHF-35510 Cesson Sévigné (Rennes)29, Avenue des PeupliersTel: +33 (0)2 99 83 00 50Fax: +33 (0)2 99 83 00 60

EBV Elektronik GmbHF-69693 Venissieux Cedex (Lyon)Parc Club du Moulin á Vent,33, Av. du Dr. Georges LévyTel: +33 (0)4 72 78 02 78Fax: +33 (0)4 78 00 80 81

EBV Elektronik GmbHF-92184 Antony Cedex (Paris)3, Rue de la RenaissanceTel: +33 (0)1 40 96 30 00Fax: +33 (0)1 40 96 30 30

PN Electronics142-176 avenue de StalingradParc Technologique des Corvettes BP 53F-92703 Colombes CedexTel: +33 (0)1 47 80 67 85Fax: +33 (0)1 47 85 95 12

PN ElectronicsRue Jean Bart Immeuble CalliopeF-31317 LabegeTel: +33 (0)5 62 88 23 23Fax: +33 (0)5 62 88 23 29

PN Electronics13, impasse des CerisiersF-67580 LaubachTel: +33 (0)3 88 90 43 48Fax: +33 (0)3 88 90 37 11

PN Electronics334 Rue des vingt toises-Le Magistere IIF-38950 Saint Martin le VinouxTel: +33 (0)4 38 02 02 03Fax: +33 (0)4 38 02 21 00

Rutronik SAAvenue Gustave Eiffel ZI BP 81F-33605 Pessac, Cedex (Bordeaux)Tel: +33 (0) 5/57 26 40 00Fax: +33 (0) 5/56 07 64 41

Rutronik SA6 Mail de l’EuropeF-78170 La Celle St Cloud, (Gecodis)Tel: +33 (0) 1/30 08 33 26Fax: +33 (0) 1/30 08 33 29

Rutronik SA3 Allée des Centaurées Le Royal IIF-38240 Meylan , (Grenoble)Tel: +33 (0) 4/76 61 00 90Fax: +33 (0) 4/76 61 00 99

Rutronik SA1, Impasse René LebrunF-72000 Le MansTel: +33 (0) 2/43 78 16 97Fax: +33 (0) 2/43 78 19 12

Rutronik SA6. impasse Michel Labrousse BP 1305F-31106 ToulouseTel: +33 (0) 5/61 40 96 50Fax: +33 (0) 5/61 41 75 49

Rutronik SA11, rue du TaninLingolsheim PB 109F-67883 - Tanneries , Cedex (Strasbourg)Tel: +33 (0) 3/88 78 12 12Fax: +33 (0) 3/88 78 02 20

Rutronik SA170, Avenue Jean-Jaurès BP 7113F-69353 Lyon, Cedex 07 (Lyon)Tel: +33 (0) 4/72 76 80 00Fax: +33 (0) 4/72 76 80 05

EUROPEAN DISTRIBUTORS

AustriaEBV Elektronik GmbHA-1150 Wien, Diefenbachgasse 35/1Tel: +43 (0)1 891 52 0Fax: +43 (0)1 891 52 30

Glyn ÖsterreichWaidhausenstr. 13/2/9A-1140 WienTel: +43 (0)1 419 07 14 0 Fax: +43 (0)1 419 07 14 50

Ineltek GmbHWagramer Strasse 126/21A-1220 WienTel: +43 (0)1 204 98 38 0Fax: +43 (0)1 204 90 38

Rutronik Elektronische BauelementeGes.m.b.H.Durisolstrasse 7A-4600 WelsTel: +43 (0) 72 42/4 49 01Fax: +43 (0) 72 42/4 49 01 33

Rutronik Elektronische BauelementeGes.m.b.H.Waidhausenstrasse 19, Top 10A-1140 WienTel: +43 (0) 1/4 19 65 50Fax: +43 (0) 1/4 19 65 50 33

BelgiumEBV Elektronik GmbHB-1831 Diegem, Kouterveldstraat 20Tel: +32 (0)2 716 00 10Fax: +32 (0)2 720 81 52

Rutronik Elektronische Bauelemente GmbHPlace-Rooseveltplein, 1/B11B-9600 Ronse-RenaixTel: +32 (0) 55 20 74 63Fax: +32 (0) 55 20 98 05

BulgariaRutronik Elektronische Bauelemente GmbHul. Cherkovna No.57, Büro No.16BG-1505 SofiaTel: +359 2 9430330Fax: +359 2 9430331

Czech RepublicEBV Elektronik GmbHCZ-170 00 Praha 7, Argentinska 38 / 286Tel: +420 234 09 10 11Fax: +420 234 09 10 10

Rutronik Elektronische Bauelemente CZspol.s.r.oRooseveltova 13CZ-160 00 Praha 6Tel: +420 233 343 120Fax: +420 233 323 955

Rutronik Elektronische Bauelemente CZspol.s.r.oSlavickova 1aCZ-63800 BrnoTel: +420 (0) 5/45 19 35 17Fax: +420 (0) 5/45 22 22 56

DenmarkEBV Elektronik GmbHDK-2860 Søborg, Rosenkæret 11 CTel: +45 39 69 05 11Fax: +45 39 69 05 04

EBV Elektronik GmbHDK-8230 Aabyhøj, Ved Lunden 9Tel: +45 86 25 04 66Fax: +45 86 25 06 60

Rutronik Elektronische Bauelemente GmbHFarum Gydevej 63DK-3520 FarumTel: +45 70 20 19 63Fax: +45 70 20 19 73

FinlandEBV Elektronik GmbHFIN-02240 Espoo, Pihatörmä 1 aTel: +358 (0)9 27 05 27 90Fax: +358 (0)9 27 09 54 98

EBV Elektronik GmbHFIN-90100 Oulu, Nahkatehtaankatu 2Tel: +358 (0)8 562 49 10Fax: +358 (0)8 562 49 15

25

IrelandEBV Elektronik GmbHBallymount Trading Estate Ballymount Road, WalkinstownDublin 12Tel: +353 (0)1 4 56 40 34Fax: +353 (0)1 4 56 40 35

Rutronik LtdOrmeau Business ParkUnit 258 Cromac AvenueBelfast BT7 2JATel: +44 28 90 87 10 00Fax: +44 28 90 87 10 01

IsraelEBV ElektronicIL-40600 Tel MondDrorrim South Commercial Center (Avnet building), P.O. Box 149Tel: +972 (0)9 778 02 60Fax: +972 (0)9 68 80

Toyo Ram Electronics Ltd1 Hamasger St, Raanana 43653Tel: +972 (0)9 760 36 50Fax: +972 (0)9 744 30 50

ItalyEBV Elektronik s.r.l.I-00155 RomaViale Palmiro Togliatti 1639Tel: +39 06 40 63 66 5/789Fax: +39 06 40 63 77 7

EBV Elektronik s.r.l.I-10156 Torino, Corso Vercelli, 348Tel: +39 011 2 62 56 90Fax: +39 011 2 62 56 91

EBV Elektronik s.r.l.I-20092 Cinisello - Balsamo (MI)Via C. Frova, 34Tel: +39 02 66 09 62 90Fax: +39 02 66 01 70 20

EBV Elektronik s.r.l.I-35100 PadovaVia IX Strada, 23/C int. 2Zona IndustrialeTel: +39 049 7 92 36 17Fax: +39 049 8 07 48 74

EBV Elektronik s.r.l.I-41010 Cognento (MO)Via Campagna, 12Tel: +39 059 29 24 / 21 1Fax: +39 059 29 29 /48 6

EBV Elektronik s.r.l.I-50127 Firenze, Via Panciatichi, 40Palazzo 11Tel: +39 055 43 69 30 7Fax: +39 055 42 65 24 0

Malpassi s.r.l.Via Baravelli 1I-40012 Calderara di Reno BolognaTel: +39 051 72 72 52Fax: +39 051 72 73 78

Melchioni Electronica S.p.A.Divisione IndustriaVia Pietro Colletta 37I-20135 MilanoTel: +39 025 79 43 54Fax: +39 025 41 34 001

Rutronik Italia S.r.l.Via Caldera, 21Centro Direzionale S.SiroI-20153 Milano (MI)Tel: +39 02 40 951 1Fax: +39 02 40 951 224

Rutronik Italia S.r.l.Viale Togliatti, 25I-40133 Bologna (BO)Tel: +39 051 351 94 00Fax: +39 051 351 94 90

Rutronik Italia S.r.l.Via V. Emanuele, 33I-50041 Calenzano (FI)Tel: +39 055 88 27 332Fax: +39 055 88 10 364

Rutronik Italia S.r.l.Via Arcora,110 - Palazzo GecosI-80013 Casalnuovo di Napoli (NA)Tel: +39 081 52 28 709Fax: +39 051 31 75 131

Rutronik Italia S.r.l.Via Savelli, 62I-35129 Padova (PD)Tel: +39 049 86 978 00Fax: +39 049 86 978 90

Rutronik Italia S.r.l.Via Del Maggiolino, 125I-00155 Roma (RO)Tel: +39 06 228 782 1Fax: +39 06 228 782 689

Rutronik Italia S.r.l.Strada Torino, 43/45 EuropalaceI-10043 Orbassano (TO)Tel: +39 011 90 220 00Fax: +39 011 90 63 913

NetherlandsEBV Elektronik GmbHNL-3606 AK MaarssenbroekPlanetenbaan 116Tel: +31 (0)346 58 30 10Fax: +31 (0)346 58 30 25

Glyn BeneluxWaalreseweg 17 NL-5554 HA ValkenswaardNiederlandeTel: +32 (0)1 402 04 97 00Fax: +32 (0)1 402 04 97 84

Rutronik Elektronische Bauelemente GmbHMadame Curiestraat 2NL-3316 GN DordrechtTel: +31 (0) 78/6 52 13 80Fax: +31 (0) 78/6 52 13 81

NorwayEBV Elektronik GmbHN-0612 OsloRyensvingen 3 B PO Box 101ManglerudTel: +47 22 67 17 80Fax: +47 22 67 17 89

PolandEBV Elektronik GmbHPL-50-062 Wroclaw, Plac Solny 16Tel: +48 (0)71 34 229 44Fax: +48 (0)71 34 229 10

EBV Elektronik GmbHPL-02-672 Warszawaul. Domaniewska 39ATel: +48 (0) 22 640 23 55 Fax: +48 (0) 22 640 23 56

Rutronik Polska Sp. z.o.o.ul. Sasiedzka 11PL-44244 ZoryTel: +48 32/4 75 90-20Fax: +48 32/ 4 75 90-22

Rutronik Polska Sp. z.o.o.ul. Batorego 28-32PL-481-366 GdyniaTel: +48 (0) 58 / 783 20 - 20Fax: +48 (0) 58 / 783 20 ? 22

RussiaEBV Elektronik GmbH RUS-127486 Moscow, Korovinskoye Chausse 10Build 2, Off. 28 Tel: +7 (0)95 937 87 07Fax: +7 (0)95 937 87 06

EBV ElektronikVasilkovskaya str. 14UA 03040 KievTel.: +380 44 496 22 26Fax: +380 44 496 22 27

Ineltek RussiaKutusovsky Prospect 14, Building 1, Office 30RUS-121248 Moscow, RussiaTel. +7 (0)95 101 89 70Fax. +7 (0)95 326 69 50

Rutronik Beteiligungsgesellschaft mbHHaus 3, Büro 403, Leningradskoje Chausse 16RUS-125171 MoscowTel: +7 (0) 9 51 59 92 55

Web Sites

Anatec AG:www.anatec.ch

EBV Elektronik GmbH:www.ebv.com

Glyn GmbH & Co. KG:www.glyn.de

GD Technik Limitedwww.GD-Technik.com

Ineltek GmbH:www.ineltek.de

Malpassi srl:www.malpassi.it

Melchioni Electronica SpA:www.melchioni.it

PN Electronics:www.pne.fr

Rutronik:www.rutronik.com

Sagitron:www.sagitron.es

Toyo Ram Electronics Ltd:www.toyoram.co.il

SloveniaEBV ElektronikSI-1511 Ljubljana, Dunajska c. 22Tel: +386 (0)1 300 03 73Fax: +386 (0)1 433 04 57

South AfricaEBV ElectrolinkZA-2157 Woodmead, JohannesburgWoodlands Office Park141 Western Service RoadBuilding 14-2nd FloorTel: +27 (0) 11 236 19 00Fax: +27 (0) 11 236 19 13

EBV ElectrolinkZA-8001 Foreshore, Capetown Fleetway House 5th floorMartin Hammerschlag WayTel: +27 (0) 21 421 53 50Fax: +27 (0) 21 419 62 56

EBV ElectrolinkZA-Glenmore, Durban 4001236 Queen Mary AveTel: +27 (0)31 205 12 05Fax: +27 (0)31 205 22 65

SpainEBV Elektronik GmbHE-08950 Esplugues de Llobregat(Barcelona)Anton Fortuny, 14-16 Esc C 3o 2aTel: +34 93 473 32 00Fax: +34 93 473 63 89

EBV Elektronik GmbHE-28760 Tres Cantos / MadridC/Ronda de Poniente, 4Centro Empresarial EuronovaTel: +34 91 804 32 56Fax: +34 91 804 41 03

Rutronik Espana S.LCtra. Canillas 138 - 2a Planta - 9BE-28043 MadridTel: +34 91/300 55 28Fax: +34 91/300 53 28

Rutronik Espana S.LAvda, Constitucion Nr. 171, Entlo 3, Esc.BE-08860 Castelldefels, (Barcelona)Tel: +34/93/664 62 04Fax: +34/93/664 62 05

SagitronC/ Montón de Trigo 2,esq. avda. de la IndustriaE-28760 Tres Cantos MadridTel: +34 91 8 06 38 00Fax: +34 91 8 06 38 05

SwedenEBV Elektronik GmbHS-19272 Sollentuna, Sjöängsvägen 7Tel: +46 (0)8 59 47 02 30Fax: +46 (0)8 59 47 02 31

EBV Elektronik GmbHS-21235 Malmö, Derbyvägen 20Tel: +46 (0)40 59 21 00Fax: +46 (0)40 59 21 01

SwitzerlandAnatec AG Sumpfstrasse 7, CH-6300 ZugTel: +41 (0)4 748 32 32Fax: +41 (0)4 748 32 31

EBV Elektronik GmbHCH-1010 LausanneAv. des Boveresses 52Tel: +41 (0)21 654 01 01Fax: +41 (0)21 654 01 00

EBV Elektronik GmbHCH-8953 Dietikon, Bernstrasse 394Tel: +41 (0)1 745 61 61Fax: +41 (0)1 745 61 00

Rutronik Elektronische Bauelemente AGHölzliwisenstrasse 5CH-8604 VolketswilTel: +41 (0) 1/947 37 37Fax: +41 (0) 1/947 37 47

TurkeyEBV Elektronik GmbHTR-34742 IstanbulBayar Caddesi, Gülbahar Sok. No:17Perdemsaç Plaza, 13th Floor, D:134Kozyatagi,Tel: +90 (0)216 463 13 52Fax: +90 (0)216 463 13 55

United KingdomEBV ElektronikEBV House, 7 Frascati WayMaidenhead, Berkshire, SL6 4UYTel: +44 (0)1628 783 688Fax: +44 (0)1628 783 811

EBV Elektronik144 West George Street Glasgow, G2 2HGTel: +44 (0)141 352 20 50Fax: +44 (0)141 352 20 59

EBV ElektronikManchester International OfficeCentre Suite 5B, Styal RoadManchester, M22 5WBTel: +44 (0)161 499 34 34Fax: +44 (0)161 499 34 74

EBV Elektronik12 Interface Business ParkBincknoll Lane, Wootton BassettWiltshire, SN4 8SYTel: +44 (0)1793 849 933Fax: +44 (0)1793 859 555

GD Technik Limited Tudor House 24 High Street Twyford Berkshire RG10 9AGTel: +44 (0)1189 34 22 77 Fax: +44 (0)1189 34 28 96

Rutronik LtdBuilding 3 ArchipeligoLyon WayFrimley Surrey GU16 7ERTel: +44 (0) 844 800 88 00Fax: +44 (0) 12 76 67 38 29

EUROPEAN REPRESENTATIVES

DenmarkFujitsu Microelectronics EuropeDalvej 25, DK-2820 GentofteTel: +45 39 40 11 15 Fax: +45 39 40 11 45

IsraelToyo Ram Electronics Ltd.1 Hamasger Street, Raanana 43653 Tel: +972 (0)9 744 30 50Fax: +972 (0)9 760 36 50

MULTIMEDIA

FME-

MUL

TIM

EDIA

-020

6

Fujitsu Microelectronics Europe

SALES OFFICES EUROPE

GermanyHeadquartersFujitsu Microelectronics Europe GmbHPittlerstrasse 47D-63225 LangenTel: +49 (0)61 03 69 00Fax: +49 (0)61 03 69 01 22

Fujitsu Microelectronics Europe GmbHFrankfurter Ring 211D-80807 MünchenTel: +49 (0)89 32 37 80Fax: +49 (0)89 32 37 81 00

FranceFujitsu Microelectronics Europe GmbH105 rue Jules GuesdeF-92300 Levallois PerretTel: +33 (0)1 55 21 00 40Fax: +33 (0)1 55 21 00 41

ItalyFujitsu Microelectronics Europe GmbHPalazzo Pitagora - Milano 3 CityVia Ludovico il Moro 4BI-20080 Basiglio, Milano Tel: +39 02 90 45 02 1 Fax: +39 02 90 75 00 87

United KingdomFujitsu Microelectronics Europe GmbHNetwork House, Norreys DriveMaidenhead, Berkshire SL6 4FJTel: +44 (0)1628 50 46 00 Fax: +44 (0)1628 50 46 66

Direct contact to Fujitsu’s Business Unit Multimedia: [email protected]

http://emea.fujitsu.com/microelectronics

Documents

MULTIMEDIA SOLUTIONS - Fujitsu