multi-purpose core and tooth build up resin

PULPDENT CORPORATION

spee-dee build-upIt’s the spee-dee way . . . to build up broken down teeth

One step post and core build ups ensure a homogenous, one-piece internal structure.

PULPDENT

REALLY DOESCUT LIKE DENTIN

self-adhesivedual curemoisture tolerantself-etching to dentinfluoride releaseradiopaque

spee-dee build-up

PULPDENT

spee-dee build-up

so many clinical usesPost cement and core build upDirect bonded core without a postVital tooth build up for crown prepBase/liner under restorationRepair lost fillings and broken splintsPatch broken cusps and porcelainEmergency repairs

PULPDENT

spee-dee build-upreally does cut like dentin

Contrary to manufacturers’ claims, traditional composite resins do not cut like dentin. Spee-Dee Build-Up is different. Clinicians report that Spee-Dee Build-Up has the same resistance to the cutting bur as tooth structure.

PULPDENT

Nothing simulates tooth structure like spee-dee build-up.Perfect cutting and trimming – Perfect crown preps

spee-dee build-upreally does cut like dentin

PULPDENT

Rotary instruments transition smoothly from tooth to Spee-Dee Build-Up.

They cut accurately and do not ditch, gouge, chatter or gum up.

Your crown preps are perfect.

spee-dee build-upunique features

PULPDENT

Self-adhesive: Bonding agents are optional Self etching to dentin: Etching dentin is optional Moisture tolerant: Favorable for use in the wet oral environment Really cuts like dentin: Burs do not ditch, gouge, chatter or gum up Automix cartridge: Controlled dispensing Angled dispenser tips: Accurate placement 25 mL and 50 mL cartridges: Economy packaging

spee-dee build-upCase 1: post cementation and core build up

PULPDENT

1. After endodontic treatment, a molar was prepared with two post holes.

2. Pulpdent Etch-Rite was applied to the post holes and the preparation for 15 seconds. Etching dentin is optional.

3. After rinsing thoroughly, removing excess moisture and leaving the tooth slightly moist, Spee-Dee Build-Up was dispensed into the post holes and around the preparation.

spee-dee build-upCase 1: post cementation and core build up

PULPDENT

4. Posts were inserted with a twisting, up and down motion to ensure uniform coverage of Spee-Dee Build-Up, and then light cured for 20 seconds.

5. Spee-Dee Build-Up was applied around the posts to the occlusal level and light cured. The material is also self-cure.

6. The post and core preparation was trimmed and finished and ready for an impression or digital scan.

spee-dee build-upCase 2: patching a defective core

PULPDENT

1. A radiograph showed a defect at the crown margin of the upper right second bicuspid (#4).

2. Upon removal of the crown, the carious lesion was clearly visible. The old core material is blue.

3. After removing the caries. Spee-Dee Build-Up was used to patch up the core without etching or bonding agents.

spee-dee build-upCase 3: patching an existing crown prep

PULPDENT

1. Removal of an old crown revealed a carious lesion in the cervical area.

2. In minutes the caries was removed and Spee-Dee Build-Up was used to patch the defect.

spee-dee build-up

Code Description

SBU 25mL cartridge + 20 automix tips

SBU50 50mL cartridge + 30 automix tips

PULPDENT