Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Home screen operationsHome screen operationsOperational Overview
POWER switchPOWER switch- Power on/off.- Adjusts display brilliance.- Changes hue.
Tap
Displays the home screen.Home iconHome icon
Display icons (max. 10)
Home screenHome screenHome screenHome screenHome screen
Long tap a display icon to edit, delete, resize, or change its location.
Display icon long tapped
Edit Delete
Size (large or small)
Tap
How to select a displayHow to select a display
- From the home screen (see above)- From the quick page
The quick page has the display icons selected to large size on the home screen.
Quick pageQuick pageQuick pageQuick pageQuick page
“eGuide” providesan abbreviatedoperator’s guide.
Tap
MULTI FUNCTION DISPLAY
TZTL12F/TZTL15FOperator’s Guide
Model
The purpose of this guide is to provide the basic operation for this equipment. For detailed information, see the operator’s manual in the supplied CD-ROM. You can get the latest version of the manual by accessing the quick response code at the back of this guide.iPhone, iPod and iPad are trademarks of Apple Inc. Android is a trademark of Google Inc. All brand and product names are trademarks, registered trademarks or service marks of their respctive holders.
Tap
How to edit a display icon
www.furuno.com
Touchscreen operationsTouchscreen operationsTouchscreen operationsTap
- Select an item on a menu.- Select an object to show the
corresponding pop-up menu.
- Move the chart.- Scroll the menu.
Zoom in Zoom out
Do the function assigned to [Function Gesture] in the [Settings] - [General] menu.
Drag
Two finger pinch Two finger tap
Menu operationMenu operation
- Zoom in, zoom out the plotter and weather displays.
- Change the range on the radar display.
Slider barSlider barSlider barSlider barSlider bar
Drag
Tap operation also available.
Pop-up menu
Tap any part of the screen or an object.
Tap the required function.(”>” indicates additional options.)
Layer menu
Tap the required function.
Layer menuLayer menuLayer menuLayer menuLayer menuSlide-out menu
Tap the required function.
Slide menuSlide menuSlide menuSlide menuSlide menu
Swipe leftward from the right edge. Icon color and function state
Yellow: ON, White: OFF
Tap the [Home] icon.Tap [Settings].
Tap the required menu. Tap the required option.
Settings menu
Two finger drag
Change the viewpoint position on the 3D display.
Zoom in
Zoom in
Zoom in
Zoom in
Zoom in
Zoom out
Zoom out
Zoom out
Zoom out
Zoom out
Pop-upmenuPop-upmenuPop-upmenuPop-upmenuPop-upmenu
Swipe upward from the bottom edge.
2
Plotter
Display range
Data area Heading line
Inactive route (expanded)
Point
Track
COGCOG
Return own ship to screen center
RetTap
Orientation ModeSwitch between NU and HU.
Switch between 2D and 3D. (Drag upward with two fingers also.)
2D: 3D3D: 3D
Swipe from the left edge of the screen rightward to show the data area at the left edge of the screen. Tap “<” to hide the data area.
How to add a data boxHow to add a data box
How to remove or change the contents of a data boxHow to remove or change the contents of a data box
Tap the data to add.Tap an unoccupied space. Ex. “Cursor” data added to the data box
Data Area (Data Box)Data Area (Data Box)
Tap the data to remove or change.Tap the data to remove or change.Tap the data to remove or change.
Data box settings
Remove: Tap [Remove].Change: Tap the data to use.
Use flipswitch to set data format.(ON: Analog, OFF: Digital)
Boat iconBoat icon
Cursor
Inactive route(sleeping)(Departure orarrival point,selectable on [Layers] menu.)
DATA ROUTE RADAR
DATA ROUTE RADAR
DATA ROUTE RADARDATA ROUTE RADAR
DATA ROUTE RADAR
3
PointsPoints can be entered on the plotter and radar displays to mark important locations such as a good fishing spot. Point attributes (position, symbol type, color, etc.) are recorded to the points list.
Tap where to enter a point.
The point is entered on the screen.
Tap a point or the location to set as destination.
On-screen point Selected locationOn-screen pointOn-screen point
Points listPoints list
How to enter a point
Yellow line:Shortest course from own ship to the destination.
Red dashed line (thick):Indicates course to go to the destination.
Tap the point to set as the destination.
How to set a point as destination
Tap [List] on the home screen.
The point is put at the center of the plotter display.
Sort the list by name, icon, color, range.
Destination point
4
RoutesRoutesA route is comprised of a series of waypoints leading to a destination. Routes are saved to theroutes list.
On-screen routeOn-screen route
Routes listRoutes list
Tap the first point for the route.
At the last point
Tap the next point for the route.Repeat to enter all points for the route.
How to create a new route
How to follow a route
Tap a leg of the route.
00
T l f th t
1
2
34
1
23
4
1st point(route start point)1st point(route start point)
Last pointLast point
Home screen
Sort list by name, color, or total length.
Tap the route.
Enter a name for the route, then tap [ ].
(Top right corner)
5
Radar
How to switch between standby and TXHow to switch between standby and TX
Select method
Manualadjustment
Tap to switch between automatic and manual.method
Manual
Drag the slider/tap the slider bar to adjust.
How to adjust the gain / sea clutter / rain clutterHow to adjust the gain / sea clutter / rain clutter
RA
DA
RD
ATA
2D
ATA
1TXX
Tap
: Standby
: TX
TX
TX
Tap
“A” means automatic adjustment“M” means manual adjustment
Tap
Dataarea
Own ship positionOwn ship position
Heading lineHeading lineGuard zoneGuard zone
Fixed range ringsRange
North markNorth mark
Sliderbar
Return ownship icon toscreen center.
0
10
20
30
40
50
607080
90100
110
120
200
230
240250
260270
280
290
300
310
320
330
340
350
210
180
170
160
140
220
190
150
130
340
Gain
Sea
Rain
Tap
(At bottom of data area)
RADARDATA ROUTE
RADARDATA ROUTE ARRRRR Tap
(Top right corner)
6
Tap
TargetTarget
Tap a target to show its range and bearing from own ship.
How to measure the range, bearing from own ship to a targetHow to measure the range, bearing from own ship to a target
How to set a guard zoneHow to set a guard zoneA guard zone alerts you (with aural and visual alarms) when a radar target enters the area you specify.
The guard zone appears in dashed lines.
A circle appears at each corner of the guard zone.
The dashed lines change to solid lines, indicating the guard zone is active.
Drag the circles to set guard zone.
0
10
20
30
40
50
607080
90100
110
120
200
230
240250
260270
280
290
300
310
320
330
340
350
210
180
170
160
140
220
190
150
130
340
Open the[Layers] menu.
1
Tap dashed line on guard zone.
Tap
Guard zoneGuard zone
Tap the guard zone again.
Tap
2:01 PM
ON
ON
ON
RADARDATA ROUTE
(Top right corner)
7
ARPA OperationARPA Operation
How to activate, deactive ARPA
How to manually acquire a target
Tap the target to acquire.
TargetTarget
Tap
ARPA symbols
At acquisition Lost target
How to display target data
Tap an ARPA target to show its data.
ARPAtargetARPAtarget
Tap
ARPA is an anti-collision aid that tracks the movement of other ships to help prevent collision.ARPA not only tracks other ships but also provides their navigation data. Targets can be acquired manually, automatically, or both automatically and manually.
2
ID
BRG
RNG
CPA
TCPA
1
Within 30 seconds after acquisition
1
ARPA activated
ARPA deactivated
Acquire
Open the[Layers] menu.
0
10
20
30
40
50
607080
90100
110
120
200
230
240250
260270
280
290
300
310
320
330
340
350
210
180
170
160
140
220
190
150
130
340
2:01 PM
ARPON
AAAARAOFF
RADARDATA ROUTE
8
OR
CPA/TCPA alarm
The CPA/TCPA alarm releases aural and visual alarms when both the CPA and TCPA of a tracked target are equal to or lower than the CPA/TCPA alarm setting.
How to set the CPA/TCPA alarmHow to set the CPA/TCPA alarm
CPA: Closest point of approach TCPA: Time to closest point of approach
How to acknowledge the CPA/TCPA alarmHow to acknowledge the CPA/TCPA alarm
CPA/TCPA Alarm
Tap the alarm message (top of screen) to acknowledge the alarm and stop the aural alarm.
Tap
Home screenHH
Set the alarm value, then tap [ ].
ON
9
AIS symbols ON
AIS symbols OFF
How to show or hide AIS target symbolsHow to show or hide AIS target symbols
AIS target symbolsAIS target symbolsClass B AIS
Color: blue
SOG/COG vector
Color: green
SOG/COG vector
FlashingColor: red
Color- AIS target: blue- “x” symbol: red
Color- AIS target: green- “x” symbol: red
Class A AIS
Normal target
Dangerous target
Lost target
Proximity AIS target alarmProximity AIS target alarmThe proximity AIS target alarm releases aural and visual alarms when the distance between own ship and an AIS target is less than the alarm value.
How to show AIS target dataHow to show AIS target data
Tap an AIS target to show its data.
AIStarget
AIStarget
Tap
AIS (Automatic Identification System)
Home screenHH
FURUNO987654321 FURUNO
987654321
Set the alarm value, then tap [ ].
20
30
60
Open the [Layers] menu.
AIS sON
OFF
ON
RADARDATA ROUTE
10
Fish Finder
How to select a frequencyHow to select a frequencyLow frequency: For “normal” use.High frequency: For detailed observation of schools of fish.Dual frequency: Show both the low and high frequency pictures.
750-m556
Tap (High Freq.)
(Low Freq.)
Single frequency
Dual frequencyDual frequency
How to show past echoes (echo history)How to show past echoes (echo history)
Swipe leftward or rightward to show past echoes.
750-m556
Return to normal display.
Switch between TX and standby.
ACCU-FISH
TX/STBY
A-Scopeft HF 556
ft HF 556
ON
ON
ON
Bottomecho
Depthscale
Fishmark*1
Frequency, depth
Sliderbar
A-scope display
Temperaturescale*2
Temperature graph*2
*1 Requires appropriate transducer.*2 Requires temperature sensor.
ft HF 11.0
ON
(Top right corner)
11
Manual mode
How to select the operating modeThe fish finder is available in automatic and manual operation. For automatic operation, gain, clutter and TVG are automatically adjusted.
How to change the rangeHow to change the range
Pinch screen.
How to adjust the gain
How to reduce the clutter
operating moperating mautomatic and manued.
750-
TapAuto mode
Manual mode
OR
A-Scope
750-
Tap
Drag the slider to set the range.
(The slider bar can also be tapped to set the range.)
Pop-up menu
How to adjust theHow to adjust the
Tap the fish finder screen to show the pop-up menu.
(The slider bar can also be tapped to set the gain.)
Home screenHH
Drag the slider to set the gain.
ft HF 556
ft HF 556
OFF
ON
ON
ON
(Top right corner)
12
ACCU-FISHTMACCU-FISHTM
ACCU-FISHTM measures the size and depth of individual fish and shows that information on the screen.
Set fish info to [Fish Size] or [Depth], then tap “<”.
Select the fish mark type ([Solid] or [Striped]) to show, or select [OFF] to show only size or depth.
Home screenHH
750-
Tap
Search for bottom fish.
Find bottom contour and hardness.
Short tail: Soft bottomLong tail: Hard bottom
Zoom displayZoom display
750-
Tap
m156
m156
Select the fish mark tyshow, or select [OFF]
ACCU-FISH
ft HF 156
ft HF 156
ft HF 556
ft HF 556
ON
ON
ON
How to set ACCU-FISHTM
13
How to enable the instrument displayHow to enable the instrument displayAdd an instrument display icon to the home to screen to show the instrument display.
Tap
Tap
Drag
How to edit an instrument displayHow to edit an instrument display
Long tap
Long tap the instrument display.
A blue line surrounds each indication.
Long tap location not circumscribed withblue line to save changes.
Long tap the indication to change or remove to get into the edit mode.
Tap
How to remove or change an indication
What you can do in the edit modeWhat you can do in the edit modeWhat you can do in the edit modeWhat you can do in the edit modeWhat you can do in the edit modeRemove / change / add / rearrange indications (drag and drop)
Long tap an area not circum-scribed with a blue line to get into the edit mode.
Tap
How to add an indication
Tap a size in desired category([Graphic], [Numeric], Highway]).
Edit modeEdit modeEdit modeEdit modeEdit mode
With connection of appropriate sensors, the instrument display shows various navigation data.
Instrument Display
How to switch instrument displays (ex. full display)
Swipe up or downFull 2 displayFull 2 displayFull 1 displayFull 1 display
After setting, tap [ ].(Incorporation in 3-way screen is also possible.)
- Remove indication: Tap [Remove].- Change size: Tap [Small]*, [Medium], or [Large].- Change type: Tap [Change Type].- Change indication: Select in [NAVIGATION DATA].* Graphic, digital only
Added item appears at tappedlocation.
14
You can connect to the internet with the wireless LAN signal to download weather information and toconnect to an iPhone, iPod, iPad, or Android device.
How to connect to an existing LAN
Wireless LAN Setting
Connect to the existing LAN to download weather data or update the software.
Home screenHH
Select [When Necessary], then tap “<”.
Select [Connect to existing LAN], then tap “<”.
XXXXXXXX
XXXXXXXXXX
XXXX
Tap network required.
Enter the name of the network, then tap [OK].
ON
15
How to create a local wireless network
Create a local wireless network to connect to an iPhone, iPod, iPad, or Android device.
Home screenHH
Check that [When Necessary] is selected.
Check that [OFF] is selected. Select [Create Local Network], then tap “<”.
XXXXXXXXX
XXXXXXXXX
X X X X X X XX
Enter the name of the network, then tap [ ].
Enter the password, then tap [ ].
ONConnect to the NavNet TZ touch 2 from the smart-phone or tablet.
PUB. NO. OSE-44870-A(1501, DAMI) TZTL12F/15F
16