10svimx.com/wp-content/uploads/2017/05/Catalogue-2016.pdf · Drilling Mud Service 12 14 16 18 ... Calculations, Equipment Selection Drill Bit Service Downhole Fluid Motor MWD, Near

IPM - Project10

About CompanyCompany’s History

69

ABOUT COMPANY

INTEGRATEDPROJECT

MANAGEMENT

PDC Drill Bits

Borehole enlargement/reamers Boring HeadsCalibrators and centralizersReducing Taper Elbows, MandrelSubs, Float subsFishing tools and blind box

Well Equipment

Mobile Constructions

242729323537

40

Metal Working

Drill Pipe Repair

Nondestructive inspection

20

22

Drill Bit Service

Downhole Drilling Motors (DDM) rental, repair and engineering support

MWD (Measure while drilling)

Drilling Mud Service

1214

1618

SERVICING

SERVICES

PRODUCT RANGE

4

5

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

66

PetroTool LLC is a reliable partner in the production, delivery and support services in the field of oil and gas wells drilling for the Russian enterprises and abroad.

The main objective of PetroTool LLC is to provide high quality tools for oil and gas wells drilling, as well as the integrated service that give a customer the company assurance reliably protecting its interests and investments.

PetroTool LLC has its own modern technology equipped lo-gistics center carrying out delivery of the equipment in the required timeframe.

All products are manufactured in accordance with imple-mentated and existing quality management standards ISO 9001: 2008, Environmental Management ISO 14001: 2004 and API Q standards.

About Company

ABOUT COMPANY

www.petrotool.ru [email protected]

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

77

About Company

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

88

About Company


AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

99

Extension of drill bit range (small size bits, bi-center bits, pdc bits), bit service volume increase.

Company’s History

COMPANY’S HISTORY

Establishment of company providing drill bit services.

2014 – providing of complete intergrated services for drilling of oil and gas wells. Proper PDM support. opening of subdivision in samara presented by highly-qualified design engineers. Certification according to API standards.

Proper downhole motors support during drilling wells on the fields of bashkortostan. ISO certificate obtainined (quality manage-ment system, health, environment).

Purchasing of modern high-precision metall-working machines (made in usa). development of drill-pipe subs for casing pipes and and lifting pipes in accordanse with GOST 7360-82.

Organization of PDM operation department, new market development (western siberia), bit software support service, using proper pdm at the fields of western siberia and samara region.

Purchasing of modern high-precision metall-working machines (made in usa, japan). PDC fixed-cutter rock cutting tool production.

Implementation and operation of the ipm-projects.

Opening of the workshop for repair and maintenance of proper ddm. purchasing of the milliing-machine centre micron (switzerland).

Organization of ndt laboratory certified under visual, ultrasonic, magnetic, cap-illary methods for facilities of oil and gas industry and for equipment of explosive and chemically hazardous industries.

2006

2007

2008

2009

2010

2011

2012

2013

2014

2015-2016

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

1010

Integrated Service

Since 2015 the PetroTool LLC has a new type of service - "turnkey" well construction or Integrated Project Management (IPM) of well construction.

In 2015 one exploration well was successfully drilled at the field of our Customer - Bashneft JSC. Today there are 4 drill crews. Now there are 4 wells are being drilled on the territory of Bashkortostan and PetroTool is planning to complete drilling of 12 wells in 2016.

Integrated project management is the arrangement of wells construction contract works in the Customer’s license areas, including the full range of activities to mobilize the drilling rig and equipment, camp construction, drill sites, access roads, communications, equipment installation in accordance with Oil and Gas industry safety rules of well drilling and fastening.

Integrated project management is the fast achievement of the goals and tasks set by the customer, ensuring engineering, technical and logistics support of project by providing the Project Management Group to the Customer

Integrated project management is the advanced well construction management technology using special forms, methods and tools for the development and implementation of balanced management decisions.

The list of services includes but is not limited to the following:

• Tender Documents Preparation (in accordance with Custom-er's requirements) • Contractors Identification to perform various types of work • Evaluation of the contractors including site inspection • Evaluation of the bids in accordance with the Customer’s requirements for all types of services• Contracts Preparation in accordance with the applicable legislation • Contracting, management and administration of subcontractors• Development of well construction programs for each type of service for each well• Preparation of the detailed mobilization plan, network diagrams of construction, mobilization, rig up operations and drilling sites preparation • Wellsite and access roads construction arrangement • Arrangement of drilling rig mobilization, equipment and residential town• Drilling operations arrangement in accordance with the approved project • Preparation of reports on the progress of work, daily reports, management reports and other documents required by the Customer. • Final report preparation. Object handover to the Customer.

INTEGRATED PROJECT MANAGEMENT


AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

1111

Integrated Service

IPM-PROJECT

Tender Department

Drilling Rigs

Engineering Calculations, Equipment Selection

Drill BitService

DownholeFluid Motor

MWD,Near Bit Module

Drilling MudMobile Housing, Completing of Wells

Oil and Gas Wells Drilling Logistics

Cementing

DrillingWasteDisposal

Core Recovery using proper equipment

Land Remediation

Preparation and submission of technical reports and other reporting documentation

SitePreparation

General Customer

IPM-project

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

BIT SERVICE

1212

BIT SERVICE INCLUDES:

• Development of bit software for hole making taking into account the geological conditions of the particular well and the region; • Selection of the optimal bit mode providing high technical and economic indicators;• Highly qualified personnel; • Hydraulic calculations;• Providing of daily report for each well; • Providing of complete drill bit run report;• Technical support of proper drill bit run; • Technical, technological and economic analyzes of drill bit run.

Servicing/Bit Service


AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

1313

Servicing/Bit Service

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

1414

DDM (downhole drilling motors) Operation Department of PetroTool LLC is engaged in providing for rent and engineering and technological support of hydraulic bottomhole motors, hydro-mechanical bidirectional drilling jars, oscillators and related equipment: lifting subs, lifting connection pipes, safety clamps and safety clamps.

All equipment is compulsory served at the facility of PetroTool LLC. At the facility there is a full range of necessary supporting documentation for the equipment available.

SERVICES PROVIDING:• Repair and maintenance of drilling motors and equipment re-quiring torque tightening and disconnecting threaded connec-tions on the hydraulic break-out machine.

DOWNHOLE DRILLING MOTORS RENTING,REPAIR AND ENGINEERING SUPPORT

Servicing/Downhole drilling motors renting, repair and engineering support


AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

1515

Servicing/Downhole drilling motors renting, repair and engineering support

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

1616

Directional Drilling Branch of PetroTool LLC is the new dy-namically developing enterprise that provides information, technical and technological support services during controlled directional and horizontal wells construction using MWD.

Company is the developer and manufacturer of the direction-al drilling complex (DDC) Target with electromagnetic commu-nication link, and also company has MWD system with hydrau-lic communication link PDT (Pulse Directional Technologies, Canada) and SureShot (APS Technology Inc., USA).

The company develops Above (Near) Bit module Target and resistivity meter. Works on electromagnetic and hydraulic com-munication links association are being performed what will sig-nificantly increase the scope of the DDC Target. Measured parameters:

• Inclination angle • Tool face • azimuth • generator RPM • gamma-ray • vibration

DDC Target features:

Drill stem rotor drilling is allowed; Proper titanium design generator is available (turnaround time is 500 hours); There is a proper software available for Target MWD (with the ability to store data in .las, .csv, gamma-ray logging in .pdf, report WITS data transmission); There is the possibility of gravitational and magnetic axes raw values issuing; There is the ability to switch the transmission frequency on the bottomhole; There are the following types available: 102, 120, 152, 178 mm.

DIRECTIONAL DRILLING COMPLEX TARGET

Servicing/Directional Drilling Complex Target


AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

1717

Servicing/Directional Drilling Complex Target

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

1818

Petrotool LLC provides integrated services of drilling muds maitenace including preparation, application, cleaning and processing within oil and gas wells construction, which is the integral part of the drilling process.

COMPANY DRILLING MUD SERVICE INCLUDES

• Developing and generation of washing muds programs based on geological and technical data provided by the customer and on the history of drilled wells; • Selection of optimal drilling mud to specific geological conditions of well drilling; • Organization of work on drilling mud preparation to ensure the drill crew continuous operation;• Process inspection and management of works on preparation, processing and optimization of the drilling mud nature to ensure efficient and unfailing hole making service; • Engineering and technological support and drilling mud preparation using modern methods of drilling mud parameters control with application of the laboratory equipment complies with api (american petroleum institute); • Shipping, handling and storage of materials required for drilling mud preparation;• Providing certified chemical agents from leading russian and foreign manufactures; • Preparation and injection of special bridging materials to prevent drilling mud absorption; • Preparation of drilling mud daily reports;• Preparation of drilled wells reports regarding drilling muds and full operating; • Providing with mobile housing equipped with a place to stay for two field engineers and with room to accommodate a field laboratory.

APPLICABLE TYPES OF DRILLING MUDS

Water Base Drilling Muds:• Clay drilling mud;• Polymer-clay drilling mud; • Polymer- clay inhibited drilling mud; • Lime drilling mud; • Gypsum-lime drilling mud; • Gypsum-potassium drilling mud; • Aluminum-potassium drilling mud; • Gipsum-aluminum-potassium drilling mud; • Poly-glycolic drilling mud; • Silicate drilling mud;• Formate drilling mud;• Salt-saturated drilling mud; • Polymineral salt-saturated drilling mud• Biopolymer unmineralized drilling mud; • Biopolymer potassium chloride, aluminum-plaster-potassium drilling mud; • Biopolymer salt-saturated drilling mud; • Biopolymer salt-saturated lightened drilling mud ; • Clayless unstructured drilling mud; • Clayless drilling mud based on hydrogel polymers.

Emulsion hydrocarbon drilling muds (EHDM) based on:Diesel fuel; Oil and gas condensate; Mineral oils;Synthetic fluids; Lime-bituminous (anhydrous) solutions..

WORKING AREASThe Republic of Bashkortostan;The Republic of Tatarstan;Komi Republic..

OUR ADVANTAGES OF DRILLING MUDS SERVICE• Highly qualified staff with rich field operation experience;• Field laboratories produced by OFITE and FANN companies which meet the requirements of API standards (American Petroleum Institute);• Individual approach with competitive prices;• Reliability and safety.

Servicing/Drilling Mud Service

DRILLING MUD SERVICE


AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

1919

Servicing/Drilling Mud Service

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

2020

One of the main activities of our company is the manufacture of parts and assembly units for any industry, construction and agriculture, as well as different metalware production.

Our company provides full life cycle of production from design up to delivery of finished products to the warehouse of the customer.

Using our knowledge, experience, advanced metalwork-ing technology and modern equipment we successfully solve problems of any complexity designing drawings based on the customer's specifications or sample parts and we manufac-ture products in accordance with current technological norma-tive documentation (GOST (State standard Specification), OST (Branch Standards), TU (Technical Specifications) and custom-er’s drawings.

Design engineering, staff training and technology planning allows working on ferrous and non-ferrous, stainless, non-magnetic metals, non-metallic materials and fluoroplastic, and allow to make a semi-automatic arc welding, gas (acetylene) welding and brazing (using molten solder).

Professional technological preparation of production and available production facilities allow any type of processing of ferrous, non-ferrous, stainless metals and other materials, re-gardless of their delivery conditions. The modern metalworking technologies implemented at the enterprise in combination with the unique welding, brazing, soldering operations allows manu-facturing products of the highest complexity that can meet any customer's requirements.

The ordered products are made within confirmed time, pro-viding the highest quality, confirmed by multilevel control throughout the process, starting with the incoming materi-als and components inspection, ending the final inspection of finished products with the compulsory use of non-destructive testing.

The products are made in approved time, ensuring high quality and confirmed by multilevel control.

It is possible to analyze the chemical composition, mechan-ical metal properties and non-destructive testing by different methods.

METALWORKING

Services/Metalworking

DRILL PIPES REPAIR

PetroTool LLC provides drill pipe repair services. Drill pipe repair is carried out under production conditions with modern equipment.

The following operations are performed in the process of repair:

• Cleaning. Inner and outer pipe surfaces are mechanically cleaned. • Defects Diagnostics. Lock joints and pipe body flaw inspection is performed. • Pipe straightening. Inspection is performed to correct the curvature of pipe • Re-threading. Lock joint re-threading operation is made with modern pipe-threading machines. Control is carried out by gauge rings.• Revitalizing of the lock joint geometry. This operation involves the repair of lock joints by metal welding on the worn surfaces and a subsequent machining of locks up to sizes corresponding to the GOST requirements.• Hard banding (Hard Facing). Hard banding (hard facing) is used to prevent wear of lock joint outer diameter. The operation is performed with flux cored wire. This alloying material has the following advantages: - substantial increase of service life; - multiple drill pipe refacing by hard banding (hard facing) without removing of the old worn-out reinforcement facing; - significant wear reduction of casing pipe due to contact with the drill pipe; - application of welding technology for drill pipes made of high-strength alloy.• Phosphating. Thread connections are subjected to phosphat-ing to protect against corrosion and antifriction properties.


AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

2121

Services/Metalworking

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

2222

Services/Non-Destructive Testing

Non-destructive testing laboratory of PetroTool LLC performs non-destructive testing and diagnostics of the equipment for oil and gas industry.

PetroTool LLC has the certified modern equipped non-destructive testing laboratory to provide non-destructive testing services.

Types (methods) of non-destructive testing and diagnostics::• Ultrasonic inspection (ultrasonic testing; ultrasonic thickness testing); • Magnetic inspection ( magnetic powder testing);• Dye-penetrant testing • Visual and measuring Inspection• Electromagnetic Inspection

TYPES OF ACTIVITY

Inspection of the equipment and materials by non-destruc-tive methods of testing in the manufacturing, installation, repair, reconstruction and technical diagnosis of oil and gas industry units.

Distinctive features of non-destructive testing laborato-ry in making flaw detection of drill pipes, casing strings of pump-compressor pipes:• Efficiency request performance; • Flexible service prices; • Availability of modern control devices relevant to both Russian and international methods of control;• Using of electromagnetic scanning unit; • Availability of special equipment for washing and steam cleaning of inspection units under temperature of 130 ° C and pressure up to 200 bar.

Inspection carried out by specialists trained according to inter-national standards ISO 9712 (equivalent to ASNT), and under NDC CR 03-440-02 of the Russian Federation

NON-DESTRUCTIVE TESTING


AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

2323

Services/Non-Destructive Testing

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

2424

I – bit diameter in mm Nominal inner diameter is indicated through the sign “X” for coreheads, as for bi-center bit two diameters are indicated the sign "X": the first diameter is the pass trhough diameter, the second one is the borehole diameter.

II – Product Lines:

— Р – standard bits with steel or matrix bodies for drilling of vertical or controlled directional wells.— РВ – bi-center bits with steel or matrix bodies for drilling with simultaneous wellbore expansion.— РС — corehead bits with steel or matrix bodies for coring.— РР – bits with steel or matrix bodies for kickoff.— РSВ – special steel body bits equipped with tungsten carbide inserts and/or hard abrasive facing intended for drilling out of cement plugs, sand tubes, intervals (gaps) under direction and collar piping and other operations.— РNР – special steel body bits equipped with tungsten carbide inserts and PDC cutters intended for borehole calibration and patterning , anti-side-tracking bit to prevent spontaneous kickoff.

III - This item indicates the quantity of blades for bits and Coreheadbits.

IV – This item means the dominant diameter of the main cutters for bits and Coreheadbits.

Base cutters’ diameter is 8-22 mm

Using PDC cutters of different sizes for bits and Coreheadbits the largest size put in the designation.

V – Drill bit / Coreheadbit body material M – Matrix body S – Steel body

Note: In designation of drill bits / Coreheadbits with steel body it is allowed not to put the letter “S”.

VI - Alternative design of drill bit / Coreheadbit.

ROCK CUTTING TOOLS

215,9 Р 5 13 М 01

Product’s Diameter (I)

Manufacturer’s Code / Product Line (II)

Quantity of Blades (III)

Cutter’s Size (IV)

Bit Body’s material (V)

Design Option (VI)

Product / Rock Cutting Tools


AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

2525


Drilling of vertical and controlled directional wells with drilling mud bottom hole flushing out

Coring with drilling mud bottom hole flushing out

ASSIGNMENT

ASSIGNMENT

DRILL BITSPRODUCT LINE P

STEEL BODY COREHEADBITS PRODUCT LINE PC

Oil and gas sidetracking with drilling mud bottom hole flushing out

ASSIGNMENT

DRILL BITSPRODUCT LINE PP

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

2626


Drilling out of cement plugs, sand tubes, intervals (gaps) under direction and collar piping

ASSIGNMENT

SPECIAL STEEL BODY BITSPRODUCT LINE PNP

These bits are equipped with tungsten carbide inserts and PDC cutters

Drilling out of cement plugs, sand tubes, intervals (gaps) under direction and collar piping

ASSIGNMENT

SPECIAL BITSPRODUCT LINE PSB

Simultaneous wellbore reaming of vertical and controlled directional wells with drilling mud bottom hole flushing out

ASSIGNMENT

BI-CENTER BITSPRODUCT LINE PB


AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

2727


Well drilling with pilot bit or bore hole reaming

ASSIGNMENT

Well drilling with pilot bit or bore hole reaming

ASSIGNMENT

ASSIGNMENT

COREHEADPRODUCT LINE R

COREHEADPRODUCT LINE RR

ROCK BIT HOLE OPENERS

Borehole reaming of soft and medium-soft formations. It is used with pilot-bit

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

2828

Carrying out of repair-and-renewal operations in wells, roughness removal on casing pipe inside surface

They are equipped with tungsten carbide inserts

ASSIGNMENT

TAPER MILLING PRODUCT LINE FFK

Drilling out of cement plugs, sand tubes as well as sidetracking with drilling mud bottom hole flushing out

ASSIGNMENT

MILLING BITSPRODUCT LINE F



AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

2929

Blade Calibrators are intended for diameter bore hole reaming in soft, hard and medium-hard formations, as well as for centering and improving of drill bit working conditions and for well axis direction stabilization during drilling

The following types of calibrators are produced:- KP – with straight blades;- KLS – with spiral blades

Depending on formation hardness calibrators are equipped with different types of cutters and they are classified the following way:- М – with cutters for soft formation gauging;- ST – with cutters for medium-hard and hard formations gauging

By the method of connection to the drill string parts the following types of calibrators are produced: - Adaptor (connecting thread type is sleeve –boring jet pipe); - Sleeve box (connecting thread type is sleeve - sleeve).

CALIBRATORS AND CENTRALIZERS

REFERENCE CALIBRATOR DESIGNATION

Cutter size depending on formation Gaging part diameter Type of calibrator Design number

8 КЛС 215,9 СТ

Product/Calibrators and centralizers

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

3030

Calibration and hole reaming in soft, medium and abrasive formations

Equipped with PDC inserts

ASSIGNMENT

CALIBRATORSPRODUCT LINE UCP

Calibrators are equipped with tungsten carbide inserts

ASSIGNMENT

CALIBRATORSPRODUCT LINE UCT

Reaming of the hole parts in soft, medium low-abrasive formations



AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

3131

CALIBRATORS

CALIBRATORSPut for order:• type of calibrator (KP, KLS)• connecting thread• type of cutting structure (М, SТ)• length of gauge part;• total length of calibrator

With spiral blades (KLS)

With straight blades (KP)


(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

3232

SUBS

Product/Subs

SUBSACCORDING TO STATE STANDARD SPECIFICATION GOST 7360-82, GOST 23979-80,TS 3668-002-79655520-2014

Subs are pipe branches with threads on their upper and bottom ends. They are used as connecting units of drilling and casing pipes, tubing having different diameters and types of thread. Subs are produced of different kinds:

for drilling strings

They are designed for connecting separate parts of drilling strings and tools used at well drilling. Subs are produced of all types and sizes according to state standard specification gost, with thread of varies directions (left as well as right)

ASSIGNMENT


AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

3333

They are used for connecing of casing pipe parts having different sizes and thread connecting types according to state standard specification gost 632-80

It is possible producing of subs with different thread type sets, sizes and length under individual customer’s requests.

Info required for placing an order:• type of sub (adaptor, sleeve box, nipple);• connecting threads;• outer diameter;• port diameter;• total length.

SUBS

SUBS

They are used for connecting tubing of different sizes, as well as underground equipment having tubing thread of connecting ends used during oil and gas wells operation. Types and sizes of tubing are according to state standard specification gost 23979-80, threads are made in accordance with state standard specification gost 633-80

for tubing

for casing pipesMade under ts 3668-002-79655520-2014

ASSIGNMENT

ASSIGNMENT

Product/Subs

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

3434

Slotted strainer is intended for drilling mud cleaning out of contaminations directly above downhole motors to prevent its failure and also to prevent it from foreign objects ingress in the process of drilling tool or equipment changing: dirt, cinders, etc

They are used for catching and extraction of large mud particles, metal and tungsten carbide scraps out of bottom hole. Junk basket consists of bole with tool-joint threads and the catch pot is threaded to the bole

Product/Well Equipment

JUNK BASKET

SLOTTED STRAINERS

SLOTTED STRAINERS

ASSIGNMENT


AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

BLIND BOX

Blind box is used for breakdown elimination during drilling and it allows to catch and to remove drilling string, its’ separate parts and foreign objects. Die collars and taps belong to the main emergency equpment. Main emergency equipment consist of die collars and taps

3535

ASSIGNMENTASSIGNMENT

BELL SOCKETSTYPES: BELL SOCKETS, BELL SOCKETS WITH FISHING TOOL BOWL

BELL SOCKETSTYPES: BELL SOCKETS (BLIND END), BELL SOCKETS (STRAIGHT-TROUGH)

Catching and removing of drilling pipes and tubing. Catching is made by press-fitting on outer surface of the pipe string upper end. Die collar design is a pipe branch with connecting thread on the upper end of it and with conical fishing surface at the bottom

Capture by screwing on the outer surface and the subsequent removing of the drilling string cylindrical parts during fishing operations at the well. Die collar thread makes thread on the caught subject at the specified length at screwing. Die collar design is a pipe branch with connecting thread on the upper end of it and with inner conical fishing thread at the bottom

BELL SOCKETS

Product/Blind Box

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

3636

Taps are used for catching of drilling string left in the well, if breakage occurred in the extra-heavy pipe part, in the lock or sleeve. Tap consists of the sleeve connecting thread, body and fishing thread at the bottom. Fishing thread is of the truncated cone shape and it has a vertical slot for cut chip removing. The following types of taps are produced:

TAPS

Capture and subsequent removal out of the well the left tubing by cutting into plain inner pipe surface

Capture and subsequent removal out of the well the left drilling string with sleeve ending by screwing into sleeve thread

Capture and subsequent removal out of drill pipes by screwing into the lock thread

Capture and subsequent removal out of the well the left drilling string by cutting into plain inner pipe surface

ASSIGNMENT ASSIGNMENT

ASSIGNMENTASSIGNMENT

TAPSTYPE MAU (UNIVERSAL OPERATIONAL TAP)

TAPSTYPE MAS(SPECIAL OPERATIONAL TAP)

TAPSTYPE MCZ(SPECIAL LOCK TAP)

TAPSTYPE MBU(UNIVERSAL DRILLING TAP)

Product/Well Equipment


AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

3737

Production / well sites recruitment

DESCRIPTION

Tank - Vacuum bottle is a mobile unit for process water storing at the well site. To maintain a positive temperature in the water tank there is a coil moving water vapor and promotes tank outside heating.

Tank is made of steel 09G2S with thickness of 10 mm, it is insulated with mineral wool mats and sheathed with galvanized sheets. Tank - Vacuum bottle consists of heat insulated reservoir based on the frame of sledge type.

There are strapping units on the tank frame for lifting and loading the tank into transport.

The package includes: tank-vacuum bottle, sledge, inspection hole, inspection ladder and coil.

Tank-vacuum bottle does not require a special base, so it can be installed anywhere close to the customer’s location.

TANK - VACUUM BOTTLE V = 8M3

BLOCK - WATER CONTAINER

ASSIGNMENT

Communication boxes are intended for installation in its internal heated cavity of varies pipelines and for protection them from environmental exposure. It can be pipelines for process water, vapor, compressed air, pressure line pumps.

Inner cavity of communication box is insulated with mineral wool mats and sheathed with galvanized sheets.

Communication boxes along the full length are equipped with covers for easy installation of pipelines and access to them. The internal cover part is also insulated.

COMMUNICATION BOX

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

3838


Safe positioning of cables and wires Access board serves as a support for laying of communications

There is a rod welded on the central pipe to support cable. There are four pipes at the bottom serve as foot

It is used to direct quadratic driving stem into the derrick cellar under connection making

The design of this product consists of pipes welded together

ASSIGNMENT ASSIGNMENT

DESCRIPTION

ASSIGNMENT

DESCRIPTION

CABLE RACK DERRICK CELLAR ANVILLACCESS BOARD


AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

3939


for collection and removal of oil and associated contaminated formation water, drilling mud and salt solution from the wellhead in the process of lifting of drilling pipes (DP) and pump-compressor pipes (PCP) during repair of oil and gas wells at the enterprises of oil and gas industry

ASSIGNMENT

SPRAY ARRESTER

Transport Pallet is a substantial design consists of the steel frame and pine wood floor boards treated with special impregnation to reduce decay and wear

Installed and fastened together pallets are formed a substantial construction that evenly distributes the weight of the rig on the well pad

ASSIGNMENT

DESCRIPTION

TRANSPORT PALLET

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

4040

MOBILE CONSTRUCTIONS

Mobile constructions are designed, built, equipped with individual customer's specifications for the different climatic conditions in accordance with the legal and technical requirements.

They do not require special foundations and therefore they can be can be moved to any place at consumers location. Electric heating and ventilation system allow to work in a wide temperature range from - 600C to + 400C. All of these is necessary for organization of the functioning of both residential and technical facilities at a horizontal platform and connection to 220V.

Types of produced mobile housing:

BKV (compression-condensation unit) is the heated mobile unit with water vessels Eurcube inside.BKV is intended for storage of drinking water at the well site. To minimize heat losses by pouring water into the vessels there are special windows in the walls provided to accommodate hoses.

CCB (compressed air unit) is a self-contained mobile compressor station intended for compressed air supply of technological processes at the drilling rig.

DGU (diesel-generator unit of container type) is a mobile metal unit-type building (block-container) with a three-phase diesel generator unit series of CATERPILLAR C15 set inside, that is designed to supply users with three-phase alternating current voltage of 220 / 400V, 50 Hz, and it is equipped with a life-support system.

Production/Mobile Constructions


AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

4141

Production/Mobile Constructions

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

NOTES

4242

Notes


AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

NOTES

4343

Notes

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

Notes

NOTES

4444


AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

Notes

NOTES

4545

(34767) 6-02-50, 6-55-05, +7 (927) 23 73 517

AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

Notes

NOTES

4646


AB

OUT

COM

PAN

YIP

M -

PROJ

ECT

SER

VICI

NG

SERV

ICES

PROD

UCT

Notes

NOTES

4747

Sadovoe Koltso Str., 4 build. А, Oktyabrsky city, 452600 Republic of Bashkortostan,

Russian FederationPhone: +7(34767) 6-55-05, +7(34767) 6-00-78E-mail: [email protected], [email protected]

Website: www.petrotool.ru

We invite you to visit our company to learn about the manufacturing process

and the level of production technology