Upload
hoangdien
View
228
Download
2
Embed Size (px)
Citation preview
With more than 100years of experience insteam turbine technology,Alstom offers a highlyefficient steam turbine,optimised for utility andindependent powerproduction, renewable,cogeneration and waste to-energy applications.
INDUSTRIAL STEAM TURBINES PRODUCT SOLUTIONS
MT Steam TurbineMid-Sized Turbine
A highly efficient and robust concept
With superior efficiency and power production, the MT steam turbine offerscustomers a robust design based on highly integrated standard modules. Itsmodular concept — with proven technology and additional design features tosimplify the power plant’s foundation — results in reduced plant capital costs.
The MT design utilises Alstom’s experience in steam turbine and combines it with the latest advances in blade profiles and steam flows to deliver a truly modern turbine, which is adapted to today’s power plant and industrial plant operator’s needs. Thanks to the flexibility of the design, the MT is available in reheat and non-reheat configurations with axial and downward exhaust options allowing it to be integrated into any plant configuration.
RPWR/PRSHT/MT_PS/EN/4.2014/FRA/2148 ©Copyright Alstom 2014. Information contained in this document is indicative only. No representation or warranty is given or should be relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is strictly prohibited. Alstom contributes to the protection of the environment. This leaflet is printed on environmentally friendly paper.
Technical Specifications
© A
LSTO
M 2
014.
All
right
s re
serv
ed.
Reduced Plant Capital Costs� Modular concept for an optimised
value / cost ratio.
� Design features that simplify the
power plant’s foundations.
� Axial exhaust that enables
single-floor plant layout - resulting in lower civic costs.
Efficient� High efficiency using state of the art
blade profiles.
� Scroll inlet delivering best efficiency for
base load plants.
� Up to seven uncontrolled extractions for a
more efficient steam cycle.
Flexible� High operational flexibility for steam and
power production.
� Multiple controlled extractions for variable
process steam demands.
Scope Offering
Alstom offers flexible MT steam turbine solutions Alstom offers flexible MT steam turbine solutions Alstom offers flexible MT steam turbine solutions Alstom offers flexible MT steam turbine solutions
Robust� Turbine designed with proven technologies.
� Reliable design based on highly integrated
standard modules.
The advanced MT steam turbine combines a highly flexible modular concept, The advanced MT steam turbine combines a highly flexible modular concept, The advanced MT steam turbine combines a highly flexible modular concept, The advanced MT steam turbine combines a highly flexible modular concept, proven technology and high efficiency.proven technology and high efficiency.proven technology and high efficiency.proven technology and high efficiency.
Optimised Solutions� With its full modular design, the MT
steam turbine can be customised on the
nozzle box, turbine pressure and steam
path, optimise for a truly tailored solution
Customer Cost Benefits Design Features
� Available in reheat or non-reheat configurations with condensing or
backpressure exhaust and optional HP and LP steam extractions for
industrial applications.
� High efficiency reaction type blading, standardised Last Stage Blade family.
INDUSTRIAL STEAM TURBINES PRODUCT SOLUTIONSMT STEAM TURBINE
Alstom's Industrial Steam Turbine Applications
MT Steam Turbine Benefits
� Available with base frame for cost effective transport and installation.
� Modular design with fully customisable steam path and various
�� exhaust directions.
For more informationplease contact Alstom:
Alstom (Switzerland) LtdBrown Boveri Strasse 7
CH-5401 Baden
Phone: +41 56 205 2025
Visit us online: www.alstom.com
Alstom Steam Turbines Experience
Alstom Project References
• 140 MT units installed worldwide, resulting in over 22 GW of power• More than 13 GW of combined heat and power production for various industries• Total steam turbine installed capacity of almost 580 GW worldwide• Over 1,000 small steam turbines (< 100 MW) delivered totaling 17 GW
Tonopah (Nevada) USA Cobra, SolarReserve (end customer)Solar power plant2013MT steam turbine, TOPAIR generator, auxiliaries, control system125 MW rated power output
Crescent DunesLocation:.............................................. Customer:............................................ Plant type:........................................... Commissioning: ................................... Scope of supply:................................... Technical specifications:.......................
North BattlefordLocation:.............................................. Customer:............................................Plant type:........................................... Commissioning: ................................... Scope of supply:................................... Technical specifications:.......................
Saskatchewan, CanadaKiewit Power EngineersCombined cycle power plant2012MT steam turbine, TOPAIR generator, auxiliaries, control system91 MW rated power output
Swiecie Location:.............................................. Customer:............................................ Plant type:........................................... Commissioning: ................................... Scope of supply:................................... Technical specifications:.......................
Swiecie, PolandMondi Packaging Paper S.A.Pulp & Paper2003MT steam turbine, TOPAIR generator, auxiliaries, control system33 MW rated power output
INDUSTRIAL STEAM TURBINES PRODUCT SOLUTIONSMT STEAM TURBINE
RPWR/PRSHT/MT_PS/EN/4.2014/FRA/2148 ©Copyright Alstom 2014. Information contained in this document is indicative only. No representation or warranty is given or should be relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is strictly prohibited. Alstom contributes to the protection of the environment. This leaflet is printed on environmentally friendly paper.
© A
LSTO
M 2
014.
All
right
s re
serv
ed.