MST16b Instruction Manual - SANUS .2014-12-16  20.0 x 20.0 01 B 03 20.0 02 20.0 NOTE: Nuts

  • View
    213

  • Download
    0

Embed Size (px)

Text of MST16b Instruction Manual - SANUS .2014-12-16  20.0 x 20.0 01 B 03 20.0 02 20.0 NOTE: Nuts

  • MST16b Instruction Manual

  • 2

    Unsure? Call 1-800-359-5520(UK: 0800-056-2853)

    Does your TV weigh more than 35 lb (15.8 kg) including accessories?

    No Perfect!

    Yes This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 (UK: 0800-056-2853) to fi nd a compatible mount.

    IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS PLEASE READ ENTIRE MANUAL PRIOR TO USE

    Before getting started, lets make sure this mount is perfect for you!

    35 lb(15.8 kg)

    Ready to begin?Please read through these instructions completely to be sure youre comfortable with this easy install process. Also check your TV owners manual to see if there are any special requirements for mounting your TV.

    If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service at 1-800-359-5520 (UK: 0800-056-2853).

    1

    2

    3

    4

    What is your wall made of?

    Drywall with wood studs? Perfect!

    CAUTION: Avoid potential personal injuries and property damage! This product is designed for use in wood stud walls - DO NOT install into drywall alone The wall must be capable of supporting fi ve times the weight of the TV and mount combined Do not use this product for any purpose not explicitly specifi ed by manufacturer Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

    ?

    OPT

    Do you have all of the tools needed?

    1/8 in.(3 mm)

    Wood

    7/16 in. (12 mm)

    3/8 in. (10 mm)

  • 3

    Dimensions

    7.9[20.0]

    3.9[10.0]

    3.0[7.5]

    8.9[22.6]

    7.0[17.8]

    5.2[13.2]

    9.1[23.1]

    2.2[5.6]

    3.9[10.0]

    3.0[7.5]

    7.9[20.0]

    1.7[4.3]

    12 12

    in.[cm]

  • 4

    Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts

    are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

    NOTE: Not all hardware included will be used.

    M4 x 12mm

    M5 x 12mm

    M6 x 12mm M6 x 35mm

    M5 x 35mm

    M4 x 35mm

    M6 x 12mm M6M4/M5 M6

    STEP 1 Parts and Hardware

    TV Bracket

    TV Bracket Extenders*

    Nylon locking bracket nuts are poly-locks and will need to be forcibly tightened.

    03 x4 04 x4

    05 x4

    07 x4

    09 x4

    06 x4

    08 x4

    10 x4

    11 x4 12 x4 13 x4

    02 x2

    01 x1

    TV Screws, Washers, and Spacers

    M6 Extension Bracket Screws* M6 Nuts*

    *Only needed for TVs with 20.0 x 20.0 cm (7 78 x 7 78 in.) hole

    patterns

  • 5

    1/4 x 2 in.

    STEP 2 Parts and Hardware

    14 x1

    Wall Plate

    Lag Bolts

    15 x2

    The wall plate 14 is shipped attached to the TV bracket 01 . Remove the wall plate 14 before starting the installation.

    14

    14

    01

    01

  • 6

    STEP 1 Attach TV Bracket to TV

    1-1 Measure Your TV Hole Pattern

    cm

    inches

    inch dimensions are approximate

    75 mm = 7.5 cm 3 in. 100 mm = 10 cm 4 in. 200 mm = 20 cm 7 7/8 in.

    Measure the width and height of your TV hole pattern.

    Record your measurements:

    Width __________cm x Height ________ cm

  • 7

    01

    1-2 Assemble Your TV BracketDetermine which TV bracket configuration to use, A or B based on your TV hole pattern measurements.

    A 20.010.0

    10.0

    7.5

    7.5

    These smaller hole patterns only use TV bracket 01 . Do not use the two TV bracket extenders 02 and four screws 03 and four nuts 04 .

    7.5 x 7.510.0 x 10.020.0 X 10.0

    Assemble TV bracket extenders 02 onto TV bracket 01 as illustrated.Secure using four screws 03 and four nuts* 04 in the corner holes shown.

    20.0 x 20.0

    01

    B

    03

    20.0

    20.002

    NOTE: Nuts 04 are poly-locks

    and will need to be forcibly tightened.

    02

    02

    03

    04

    3/8 in. (10 mm) wrench

    02

    03

    04

  • 8

    M5 M6M4

    1-3 Select TV Screw Diameter 1-4 Select TV Screw Length

    Hand thread screws into the threaded inserts on the back of your TV to determine which screw diameter (M4, M5, or M6) to use.

    FLAT BACK ROUND BACK CABLESINSET HOLES

    If your TV has a flat back AND you want your TV closer to the wall, use the shorter screws.

    Spacers and longer screws are supplied to accommodate: Round/irregular back TVs TVs with inset mounting holes Extra space needed for cables

    Standard configurations are shown. For special applications, or if you are uncertain about your hardware selection, contact Customer Service at 1-888-333-9952.

    Too Short

    Too Long

    CAUTION: Verify adequate thread engagment with the screw or screw/spacer combination.- Too short will not hold the TV.- Too long will damage the TV.

    Correct

  • 9

    1-5 Attach TV Bracket

    02

    01

    TV Bracket Confi guration A

    Illustrated (with spacers)

    TV Bracket Confi guration B Illustrated (with spacers)

    01

    Short screw and washer

    Spacer, long screw and washer

    02

    Position your TV bracket configuration over your TV hole pattern - making sure the brackets are vertically centered and level.Install using either the short screw and washer or spacer, long screw and washer combination you selected for your TV.

    IMPORTANT: Ensure TV bracket is securely fastened before moving on to the next step.

    13

    05

    06

    07

    08

    09

    10

    11

    11

    12

    12

  • 10

    5/8 in.(16 mm)

    STEP 2 Attach Wall Plate to Wall Wood Stud CAUTION: Avoid potential personal injuries and property damage!

    Drywall covering the wall must not exceed 5/8 in. (16 mm) Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1 x 3 in. (38 x 89 mm)

    1. Locate your studs. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.

    2. Level the wall plate 14 and mark the hole locations.

    1 2

    14

  • 11

    3 4

    3. Pilot holes MUST be drilled to a depth of 63.5 mm (2 in.), using a 3 mm (1/8 in.) diameter drill bit.

    4. CAUTION: Avoid potential injuries or property damage! Improper use could reduce the holding power of the lag bolt 15 .

    To avoid potential injuries or property damage. DO NOT over-tighten the lag bolts 15 .

    2 in.(63.5 mm)

    1/8 in.(3 mm)

    14

    15

    15

  • 12

    STEP 3 Hang the TV onto the Wall Plate

    12 12Loosen the knob on the TV bracket to adjust the tilt of your TV. Tighten the knob when your TV is set to the desired tilt.

    HEAVY! You may need assistance with this step.

  • 13

    Secure the TV to the wall plate using the locking tab.NOTE: If you need to remove the TV from the wall plate, unsecure the locking tab.

  • 14

    PRECAUCIN: Evite posibles lesiones personales y daos materiales. Este producto fue diseado para su uso en paredes de montantes de madera - NO instalar en yeso solo La pared debe soportar cinco veces el peso del televisor y del soporte juntos No utilice este producto para ningn otro propsito que no sea el explcitamente especificado por el fabricante El fabricante no se responsabiliza por ningn dao o lesin resultante del montaje incorrecto o del uso indebido

    ESPAOL

    INSTRUCCIONES DE SEGURIDAD IMPORTANTES. CONSRVELAS. LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO.

    Su televisor pesa ms de 15.8 kg (35 lb), incluidos los accesorios?No Perfecto!

    S Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al 1-800-359-5520 (Reino Unido: 0800-056-2853) para encontrar un soporte compatible.

    Listo para comenzar?Lea estas instrucciones en su totalidad para estar seguro de sentirse cmodo con este fcil proceso de instalacin. Consulte tambin el manual del usuario de su televisor para ver si existe algn requisito especial para instalar su televisor en la pared.Si no entiende las instrucciones o si tiene dudas acerca de la seguridad de la instalacin, del ensamblado o del uso del producto, pngase en contacto con el servicio de atencin al cliente al 1-800-359-5520 (Reino Unido: 0800-056-2853).

    Antes de comenzar, verifiquemos que este soporte sea el ideal para sus necesidades.

    1

    2

    3

    4

    De qu est hecha su pared?

    Tiene todas las herramientas necesarias?

    3 mm(1/8)

    Madera

    12 mm (7/16)

    15.8 kg(35 lb)

    No est seguro? Llame al 1-800-359-5520(Reino Unido: 0800-056-2853)

    Tabiques de yeso con montantes de madera?

    Perfecto! ?

    OPT

    10 mm (3/8 in.)

  • 15

    ESPAOL

    NOTA: No todos los elementos de sujecin incluidos debern utilizarse.

    ADVERTENCIA: Este producto contiene piezas pequeas que, si fuesen tragadas, podran producir asfixia.Antes de iniciar el ensamblaje, compruebe que todas las piezas estn incluidas y en buenas condiciones. Si faltan piezas o alguna est daada, no devuelva el artculo al distribuidor; pngase en contacto con el servicio de atencin al cliente. Nunca utilice piezas deterioradas.

    Piezas y elementos de sujecin suministrados Ver pgina 4

    Dimensiones Ver pgina 3

    PASO 1 Fijar la placa de sujecin al televisor Ver pgina 6

    1-1 Mida el patrn de orificios del televisor 1-2 Arme la placa de sujecin del televisor

    Mida en mm el ancho y el alto del patrn de orificios del televisor.

    Anote las medidas:

    Ancho _________cm x Alto ____