ms_MA240

Embed Size (px)

Citation preview

  • 8/13/2019 ms_MA240

    1/2

    CARTRIDGE MOUNTED STATIONARY SEAL

    EAGLE Mechanical Seals MA240SERIES

    The MA240 is a compact, cartridge mounted sealincorporating Eagle Industry's advanced seal technology.The seal is designed to handle a wide variety ofapplications and is easily installed, without modification, inmost standard pumps designed to ISO3069 and Din24960.

    Specific Features of MA240 Stationary mounted seal, no shaft or sleeve wear, flexiblecomponents isolated from shaft vibration and the effects ofshaft deflection.

    Springs on atmospheric side of the seal, no clogging ofspring pockets by particulates in media. Flush, Quench and drain connections as standard. PTFE Quench restrictor seal to minimise quench leakage. Slotted gland plate accommodates varying bolt circlediameters. Simple fitting procedure, ideal for packing replacement.

    Face MaterialMA240: SiC x CarbonMA241: SiC x SiC

    Metal Components: SUS 316

    O-RING: FKM

    Performance CapabilitiesPressure: Vacuum to 1.6MPa (16kgf/cm2G)Temperature: -20C to 160C (-4F to 320F)Shaft Speed: to 20m/sViscosity: MA240: to 0.5Pas (500cp) MA241: to 1Pas (1000cp)Slurry Content: MA240: to 0.5wt% MA241: to 7wt%

  • 8/13/2019 ms_MA240

    2/2

    L6

    18

    18

    18

    18

    18

    16

    16

    16

    16

    16

    16

    16

    16

    14

    14

    14

    14

    14

    14

    14

    14

    13

    13

    13

    13

    13

    13

    13

    MA240SERIES

    45

    12

    L3

    L6

    12

    L2 L1

    D4

    D3

    D2

    D1

    D5

    Dh

    7

    L4

    L5

    QUENCHING IN AND OUT OR

    DRAIN RC3/8

    FLUSHING RC3/8

    FLUSHING

    QUENCHING IN

    OR PLUG

    QUENCHING OUT OR DRAIN

    QUENCHING IN

    OR PLUG

    4EQUI-SPACED

    SIZE D D1 D2

    MIN

    D2

    MAX D3 D4 D5 L1 L2 L3 L4 L5 L6

    020 20 34 36 51 38 58 104 38 35 23 60 12 18

    025 25 39 41 51 43 58 104 38 35 23 60 12 18

    030 30 44 46 56 48 63 108 38 35 23 65 12 18

    035 35 49 51 66 53 73 118 38 35 23 75 14 16

    040 40 56 58 66 60 73 118 38 35 23 75 14 16

    045 45 61 63 71 65 78 128 38 35 23 80 14 16

    050 50 68 70 81 72 88 138 38 35 23 90 14 16

    055 55 73 75 81 77 88 138 38 35 23 90 14 16

    060 60 78 80 96 82 103 164 43 40 23 105 18 14

    065 65 84 86 96 88 103 164 43 40 23 105 18 14

    070 70 90 92 102 94 109 178 43 40 23 111 18 14

    075 75 99 102 114 104 121 193 45 40 23 123 18 14

    080 80 104 107 114 109 121 193 45 40 23 123 18 14

    085 85 109 112 124 114 131 208 45 40 23 133 20 13

    090 90 114 117 124 119 131 208 45 40 23 133 20 13

    095 95 119 122 134 124 141 218 45 40 23 143 20 13

    100 1 00 1 24 1 27 1 34 1 29 1 41 2 18 45 40 23 143 20 13

    SIZED

    D1 D2

    MIN

    D2

    MAX D3 D4 D5 L1 L2 L3 L4 L5

    INCH METRIC

    X12 0.750 19.05 34 36 51 38 58 104 38 35 23 60 12

    X14 0.880 22.23 39 41 51 43 58 104 38 35 23 60 12

    X15 0.938 23.81 39 41 51 43 58 104 38 35 23 60 12

    X16 1.000 25.4 39 41 51 43 58 104 38 35 23 60 12

    X18 1.125 28.58 42.5 44 56 48 63 108 38 35 23 65 12

    X20 1.250 31.75 49 51 66 53 73 118 38 35 23 75 14

    X22 1.375 34.93 49 51 66 53 73 118 38 35 23 75 14

    X24 1.500 38.1 56 58 66 60 73 118 38 35 23 75 14

    X26 1.625 41.28 61 63 71 65 78 128 38 35 23 80 14

    X28 1.750 44.45 61 63 71 65 78 128 38 35 23 80 14

    X30 1.875 47.63 63.5 65.5 8 1 72 88 138 38 35 23 90 14

    X32 2.000 50.8 68 70 81 72 88 138 38 35 23 90 14

    X34 2.125 53.98 73 75 81 77 88 138 38 35 23 90 14

    X36 2.250 57.15 78 80 96 82 103 164 43 40 23 105 18

    X38 2.375 60.33 78 80 96 82 103 164 43 40 23 105 18

    X40 2.500 63.5 84 86 96 88 103 164 43 40 23 105 18

    X42 2.625 66.68 90 92 102 94 109 178 43 40 23 111 18

    X44 2.750 69.85 90 92 102 94 109 178 43 40 23 111 18

    X46 2.875 73.03 99 102 1 14 1 04 1 21 1 93 45 40 23 123 18

    X48 3.000 76.2 104 107 114 109 121 193 45 40 23 123 18

    X50 3.125 79.38 104 1 07 1 14 109 121 193 45 40 23 123 18

    X52 3.250 82.55 109 1 12 1 24 114 131 208 45 40 23 133 20

    X54 3.375 85.73 109 1 12 1 24 114 131 208 45 40 23 133 20

    X56 3.500 88.9 114 117 124 119 131 208 45 40 23 133 20

    X58 3.625 92.08 119 1 22 1 34 124 141 218 45 40 23 143 20

    X60 3.750 95.25 119 1 22 1 34 124 141 218 45 40 23 143 20

    X62 3.875 98.43 124 1 27 1 34 129 141 218 45 40 23 143 20

    X64 4.000 101.6 124 1 27 1 34 129 141 218 45 40 23 143 20

    IMPERIAL SIZESMETRIC SIZES