Upload
hdg-web-host
View
228
Download
1
Embed Size (px)
DESCRIPTION
MSI Precision Specialty Instruments 2009 Diamond Knife Surgical Instrument Catalog.
Citation preview
Diamond cutting instruments for microsurgery
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34Phoenixville, PA 19460
phone 800-633-7283fax 800-699-2839
mail: [email protected]: www.msiprecision.com
Diamond knives for cataract surgery (titanium handles with a pressure mechanism) 4
Diamond knives for cataract surgery (titanium bajonet handle with the j-slot mechanism) 7
Diamond knives for glaucoma surgery 10
Diamond knives for LRI surgery 11
Diamond knives with a micrometer for refractive surgery 12
Diamond knives for retinal surgery (with a titanium handle) 14
Step diamond knives 15
Diamond knives for neuro surgery 17
Zeppelin diamond knives for neuro surgery 18
Diamond knife for neuro surgery - dura knife for dura opening 20
Cosmetic diamond knives for plastic surgery 21
Black diamond knives 22
Cleaning liquid & accessories 24
DFU description for use 25
Customer Service 28
Contents
Diamond cutting instruments for microsurgery
4
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone 800-633-7283fax 800-699-2839
mail: [email protected] web: www.msiprecision.com
B = width / L = length / D = thickness / A = angle
Diamond knives for cataract surgery (titanium handles with a pressure mechanism)
The Amidia pencil handle is made out of best quality titanium or medical steel material.Each diamond blade goes with a straight blade holder or a 30 degree angled holder.
drawingangled holder
straight holder description B L D A/A1 blade
straight / single edge
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 6
TITAN Pencil Handle No. 200
B D
A
0.171.0
30°
0.171.0
3F
0.17width
60°
0.171.0
40°
45° 30°
• The amidia pencil handle is made out of best quality TITAN and MEDICAL STEEL material.• Available with all diamond blades you will find in our leaflets, for pencil handle.• Each diamond blade goes with a straight blade holder, or 30 degree angled holder
(A in the Article No. means 30 degree angled)
STANDARD BLADES
Diamond Knife Diamond BladeNo. 211 / straight No. 11No. 211A / straight, angled No. 11
STANDARD BLADES
Diamond Knife Diamond BladeNo. 212 / straight No. 12No. 212A / straight, angled No. 12
STANDARD BLADES
Diamond Knife Diamond BladeNo. 213 / tri-facet No. 13No. 213A / tri-facet, angled No. 13
0.171.0
45°
0.171.0
30°
3F
0.17width
60°
0.171.0
40°
45° 30°
0.171.0
45°
0.171.0
30°
B D
0.17width
60°
0.171.0
40°
AA1
STANDARD BLADES
Diamond Knife Diamond BladeNo. 271 / lance with blunt sides No. 71No. 271A / lance with blunt sides, angled No. 71
0.171.0
45°
0.171.0
30°
0.171.0
3F
0.17width
60°
45° 30°
A
B D
L
L
L
216A 216 straight 0.7 2.0 0.17 30° 16
287A 287 straight 1.0 2.0 0.17 30° 87
212A 212 straight 1.0 3.0 0.17 30° 12
264 SA 264S straight 1.5 4.0 0.17 30° 64S
215A 215 straight 0.7 2.0 0.17 45° 15
211A 211 straight 1.0 3.0 0.17 45° 11
210A 210 straight 1.5 3.0 0.17 45° 10
211SA 211S straight 2.0 3.0 0.17 45° 11S
tri-facet
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 6
TITAN Pencil Handle No. 200
B D
A
0.171.0
30°
0.171.0
3F
0.17width
60°
0.171.0
40°
45° 30°
• The amidia pencil handle is made out of best quality TITAN and MEDICAL STEEL material.• Available with all diamond blades you will find in our leaflets, for pencil handle.• Each diamond blade goes with a straight blade holder, or 30 degree angled holder
(A in the Article No. means 30 degree angled)
STANDARD BLADES
Diamond Knife Diamond BladeNo. 211 / straight No. 11No. 211A / straight, angled No. 11
STANDARD BLADES
Diamond Knife Diamond BladeNo. 212 / straight No. 12No. 212A / straight, angled No. 12
STANDARD BLADES
Diamond Knife Diamond BladeNo. 213 / tri-facet No. 13No. 213A / tri-facet, angled No. 13
0.171.0
45°
0.171.0
30°
3F
0.17width
60°
0.171.0
40°
45° 30°
0.171.0
45°
0.171.0
30°
B D
0.17width
60°
0.171.0
40°
AA1
STANDARD BLADES
Diamond Knife Diamond BladeNo. 271 / lance with blunt sides No. 71No. 271A / lance with blunt sides, angled No. 71
0.171.0
45°
0.171.0
30°
0.171.0
3F
0.17width
60°
45° 30°
A
B D
L
L
L
217A 217 tri-facet 0.7 2.0 0.17 45°/30° 17
213A 213 tri-facet 1.0 3.0 0.17 45°/30° 13
curved224A 224 curved 4 facets 1.0 3.0 0.17 24
Diamond cutting instruments for microsurgery
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone: 800-633-7283 fax: 800-699-2839
mail: [email protected] web: www.msiprecision.com 5
B = width / L = length / D = thickness / A = angle
drawingangled holder
straight holder description B L D A/A1 blade
lance
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 6
TITAN Pencil Handle No. 200
B D
A
0.171.0
30°
0.171.0
3F
0.17width
60°
0.171.0
40°
45° 30°
• The amidia pencil handle is made out of best quality TITAN and MEDICAL STEEL material.• Available with all diamond blades you will find in our leaflets, for pencil handle.• Each diamond blade goes with a straight blade holder, or 30 degree angled holder
(A in the Article No. means 30 degree angled)
STANDARD BLADES
Diamond Knife Diamond BladeNo. 211 / straight No. 11No. 211A / straight, angled No. 11
STANDARD BLADES
Diamond Knife Diamond BladeNo. 212 / straight No. 12No. 212A / straight, angled No. 12
STANDARD BLADES
Diamond Knife Diamond BladeNo. 213 / tri-facet No. 13No. 213A / tri-facet, angled No. 13
0.171.0
45°
0.171.0
30°
3F
0.17width
60°
0.171.0
40°
45° 30°
0.171.0
45°
0.171.0
30°
B D
0.17width
60°
0.171.0
40°
AA1
STANDARD BLADES
Diamond Knife Diamond BladeNo. 271 / lance with blunt sides No. 71No. 271A / lance with blunt sides, angled No. 71
0.171.0
45°
0.171.0
30°
0.171.0
3F
0.17width
60°
45° 30°
A
B D
L
L
L
248A 248 lance with blunt sides 0.9 3.0 0.17 60° 48
271A 271 lance with blunt sides 1.0 3.0 0.17 40° 71
218A 218 lance with blunt sides 1.0 2.0 0.17 60° 18
220A 220 lance with blunt sides 1.0 3.0 0.17 60° 20
214SA 214S lance with blunt sides 1.2 3.0 0.17 60° 14S
214A 214 lance with blunt sides 1.4 3.0 0.17 60° 14
221A 221 lance with blunt sides 3.2 4.0 0.17 60° 21
spear
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 7
STANDARD BLADES
Diamond Knife Diamond BladeNo. 248 / lance with blunt sides, width 0.9 mm No. 48No. 248A / lance with blunt sides, width 0.9 mm, angled No. 48No. 220 / lance with blunt sides, width 1.0 mm No. 20No. 220A / lance with blunt sides, width 1.0 mm, angled No. 20No. 214 / lance with blunt sides, width 1.4 mm No. 14No. 214A / lance with blunt sides, width 1.4 mm, angled No. 14
0.171.0
0.17width
60°
0.171.0
40°
PHACO BLADES
Diamond Knife Diamond BladeNo. 208 / spear with blunt sides, width 2.5 mm No. 08No. 208A / spear with blunt sides, width 2.5 mm, angled No. 08No. 243 / spear with blunt sides, width 2.8 mm No. 43No. 243A / spear with blunt sides, width 2.8 mm, angled No. 43No. 222 / spear with blunt sides, width 3.0 mm No. 22No. 222A / spear with blunt sides, width 3.0 mm, angled No. 22No. 223 / spear with blunt sides, width 3.2 mm No. 23No. 223A / spear with blunt sides, width 3.2 mm, angled No. 23
0.17
0.172.65
40°
1.0
0.55
0.2
Front Back
0.171.0
0.2
DB
TUNNEL BLADES
Diamond Knife Diamond BladeNo. 239 / NEW tunnel 9 facets, width 1.4 mm No. 39No. 239A / NEW tunnel 9 facets, width 1.4 mm, angled No. 39No. 254 / tunnel 9 facets, width 2.0 mm No. 54No. 254A / tunnel 9 facets, width 2.0 mm, angled No. 54
60°
0.17width
0.42.0
0.1
0.17width
90°
A
DB
L
L
230A 230 spear with blunt sides 1.0 2.0 0.17 90° 30
219A 219 spear with blunt sides 1.0 4.0 0.17 90° 19
229A 229 spear with blunt sides 1.4 4.0 0.17 90° 29
208A 208 spear with blunt sides 2.5 4.0 0.17 90° 8
243A 243 spear with blunt sides 2.8 4.0 0.17 90° 43
222A 222 spear with blunt sides 3.0 4.0 0.17 90° 22
223A 223 spear with blunt sides 3.2 4.0 0.17 90° 23
278A 278 spear with blunt sides 3.5 4.0 0.17 90° 78
tunnel
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 7
STANDARD BLADES
Diamond Knife Diamond BladeNo. 248 / lance with blunt sides, width 0.9 mm No. 48No. 248A / lance with blunt sides, width 0.9 mm, angled No. 48No. 220 / lance with blunt sides, width 1.0 mm No. 20No. 220A / lance with blunt sides, width 1.0 mm, angled No. 20No. 214 / lance with blunt sides, width 1.4 mm No. 14No. 214A / lance with blunt sides, width 1.4 mm, angled No. 14
0.171.0
0.17width
60°
0.171.0
40°
PHACO BLADES
Diamond Knife Diamond BladeNo. 208 / spear with blunt sides, width 2.5 mm No. 08No. 208A / spear with blunt sides, width 2.5 mm, angled No. 08No. 243 / spear with blunt sides, width 2.8 mm No. 43No. 243A / spear with blunt sides, width 2.8 mm, angled No. 43No. 222 / spear with blunt sides, width 3.0 mm No. 22No. 222A / spear with blunt sides, width 3.0 mm, angled No. 22No. 223 / spear with blunt sides, width 3.2 mm No. 23No. 223A / spear with blunt sides, width 3.2 mm, angled No. 23
0.17
0.172.65
40°
1.0
0.55
0.2
Front Back
0.171.0
0.2
DB
TUNNEL BLADES
Diamond Knife Diamond BladeNo. 239 / NEW tunnel 9 facets, width 1.4 mm No. 39No. 239A / NEW tunnel 9 facets, width 1.4 mm, angled No. 39No. 254 / tunnel 9 facets, width 2.0 mm No. 54No. 254A / tunnel 9 facets, width 2.0 mm, angled No. 54
60°
0.17width
0.42.0
0.1
0.17width
90°
A
DB
L
L
239A 239 tunnel 19 facets 1.4 4.0 0.17 39
254A 254 tunnel 19 facets 2.0 4.0 0.17 54
255A 255 tunnel 19 facets 2.5 4.0 0.17 55
238A 238 tunnel 19 facets 3.0 4.0 0.17 38
new clear cornea MICS micro coaxial surgery
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 8
0.17width
CLEAR CORNEA BLADES
Diamond Knife Diamond BladeNo. 298 / clear cornea with sharp sides, width 2.5 mm No. 98No. 298A / clear cornea with sharp sides, width 2.5 mm, angled No. 98No. 295 / clear cornea with sharp sides, width 2.6 mm No. 95No. 295A / clear cornea with sharp sides, width 2.6 mm, angled No. 95No. 277 / clear cornea with sharp sides, width 2.8 mm No. 77No. 277A / clear cornea with sharp sides, width 2.8 mm, angled No. 77No. 273 / clear cornea with sharp sides, width 3.0 mm No. 73No. 273A / clear cornea with sharp sides, width 3.0 mm, angled No. 73No. 274 / clear cornea with sharp sides, width 3.2 mm No. 74No. 274A / clear cornea with sharp sides, width 3.2 mm, angled No. 74
TAPERED SPEAR BLADES
Diamond Knife Diamond BladeNo. 290 / spear 4 facets with sharp sides, width 2.5-3.0 mm No. 90No. 290A / spear 4 facets with sharp sides, width 2.5-3.0 mm, angled No. 90No. 232 / spear 4 facets with sharp sides, width 2.75-3.2 mm No. 32No. 232A / spear 4 facets with sharp sides, width 2.75-3.2 mm, angled No. 32No. 240 / spear 4 facets with sharp sides, width 3.0-3.2 mm No. 40No. 240A / spear 4 facets with sharp sides, width 3.0-3.2 mm, angled No. 40No. 289 / spear 4 facets with sharp sides, width 3.2-3.5 mm No. 89No. 289A / spear 4 facets with sharp sides, width 3.2-3.5 mm, angled No. 89
TAPERED SPEAR BLADES
Diamond Knife Diamond BladeNo. 288 / spear 6 facets with sharp sides, width 2.65-3.2 mm No. 88No. 288A / spear 6 facets with sharp sides, width 2.65-3.2 mm, angled No. 88
60°
0.17width
D
B
0.17width
width
90°
60°
0.17width
0.17width
width
90°
A
A
B D
B
A
D
L
L
L
231A 231 clear cornea with sharp sides 1.6 4.0 0.17 90° 31
235A 235 clear cornea with sharp sides 1.7 4.0 0.17 90° 35
236A 236 clear cornea with sharp sides 1.8 4.0 0.17 90° 36
237A 237 clear cornea with sharp sides 1.9 4.0 0.17 90° 37
238A 238 clear cornea with sharp sides 2.0 4.0 0.17 90° 38
261A 261 clear cornea with sharp sides 2.1 4.0 0.17 90° 61
262A 262 clear cornea with sharp sides 2.2 4.0 0.17 90° 62
263A 263 clear cornea with sharp sides 2.3 4.0 0.17 90° 63
265A 265 clear cornea with sharp sides 2.4 4.0 0.17 90° 65
Diamond cutting instruments for microsurgery
6
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone 800-633-7283fax 800-699-2839
mail: [email protected] web: www.msiprecision.com
B = width / L = length / D = thickness / A = angle
drawingangled holder
straight holder description B L D A/A1 blade
clear cornea 60°
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 8
0.17width
CLEAR CORNEA BLADES
Diamond Knife Diamond BladeNo. 298 / clear cornea with sharp sides, width 2.5 mm No. 98No. 298A / clear cornea with sharp sides, width 2.5 mm, angled No. 98No. 295 / clear cornea with sharp sides, width 2.6 mm No. 95No. 295A / clear cornea with sharp sides, width 2.6 mm, angled No. 95No. 277 / clear cornea with sharp sides, width 2.8 mm No. 77No. 277A / clear cornea with sharp sides, width 2.8 mm, angled No. 77No. 273 / clear cornea with sharp sides, width 3.0 mm No. 73No. 273A / clear cornea with sharp sides, width 3.0 mm, angled No. 73No. 274 / clear cornea with sharp sides, width 3.2 mm No. 74No. 274A / clear cornea with sharp sides, width 3.2 mm, angled No. 74
TAPERED SPEAR BLADES
Diamond Knife Diamond BladeNo. 290 / spear 4 facets with sharp sides, width 2.5-3.0 mm No. 90No. 290A / spear 4 facets with sharp sides, width 2.5-3.0 mm, angled No. 90No. 232 / spear 4 facets with sharp sides, width 2.75-3.2 mm No. 32No. 232A / spear 4 facets with sharp sides, width 2.75-3.2 mm, angled No. 32No. 240 / spear 4 facets with sharp sides, width 3.0-3.2 mm No. 40No. 240A / spear 4 facets with sharp sides, width 3.0-3.2 mm, angled No. 40No. 289 / spear 4 facets with sharp sides, width 3.2-3.5 mm No. 89No. 289A / spear 4 facets with sharp sides, width 3.2-3.5 mm, angled No. 89
TAPERED SPEAR BLADES
Diamond Knife Diamond BladeNo. 288 / spear 6 facets with sharp sides, width 2.65-3.2 mm No. 88No. 288A / spear 6 facets with sharp sides, width 2.65-3.2 mm, angled No. 88
60°
0.17width
D
B
0.17width
width
90°
60°
0.17width
0.17width
width
90°
A
A
B D
B
A
D
L
L
L
297A 297 clear cornea with sharp sides 3.0 4.0 0.17 60° 97
234A 234 clear cornea with sharp sides 3.2 4.0 0.17 60° 34
clear cornea 90°298A 298 clear cornea with sharp sides 2.5 4.0 0.17 90° 98
272A 272 clear cornea with sharp sides 2.6 4.0 0.17 90° 72
295A 295 clear cornea with sharp sides 2.65 4.0 0.17 90° 95
277A 277 clear cornea with sharp sides 2.8 4.0 0.17 90° 77
273A 273 clear cornea with sharp sides 3.0 4.0 0.17 90° 73
274A 274 clear cornea with sharp sides 3.2 4.0 0.17 90° 74
293A 293 clear cornea with sharp sides 3.5 4.0 0.17 90° 93
new tapered spear MICS micro coaxial surgery
B
B
L
D
A
279A 279 spear 4 facets with sharp sides 1.1-1.4 4.0 0.17 90° 79
280A 280 spear 4 facets with sharp sides 1.5-1.8 4.0 0.17 90° 80282A 282 spear 4 facets with sharp sides 1.5-2.0 4.0 0.17 90° 82284-01A 284-01 spear 4 facets with sharp sides 1.7-2.0 4.0 0.17 90° 84-01284A 284 spear 4 facets with sharp sides 1.8-2.2 4.0 0.17 90° 84284-02A 284-02 spear 4 facets with sharp sides 2.0-2.3 4.0 0.17 90° 84-02
284-03A 284-03 spear 4 facets with sharp sides 2.4-2.7 4.0 0.17 90° 84-03
tapered spear 4 facets
B
B
L
D
A
291A 291 spear 4 facets with sharp sides 2.5-3.0 4.0 0.10 90° 91
290A 290 spear 4 facets with sharp sides 2.5-3.0 4.0 0.17 90° 90
292A 292 spear 4 facets with sharp sides 2.7-2.9 4.0 0.17 90° 92
232A 232 spear 4 facets with sharp sides 2.75-3.2 4.0 0.17 90° 32
240A 240 spear 4 facets with sharp sides 3.0-3.2 4.0 0.17 90° 40
233A 233 spear 4 facets with sharp sides 3.0-3.5 4.0 0.17 90° 33
289A 289 spear 4 facets with sharp sides 3.2-3.5 4.0 0.17 90° 89
tapered spear 6 facets
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 8
0.17width
CLEAR CORNEA BLADES
Diamond Knife Diamond BladeNo. 298 / clear cornea with sharp sides, width 2.5 mm No. 98No. 298A / clear cornea with sharp sides, width 2.5 mm, angled No. 98No. 295 / clear cornea with sharp sides, width 2.6 mm No. 95No. 295A / clear cornea with sharp sides, width 2.6 mm, angled No. 95No. 277 / clear cornea with sharp sides, width 2.8 mm No. 77No. 277A / clear cornea with sharp sides, width 2.8 mm, angled No. 77No. 273 / clear cornea with sharp sides, width 3.0 mm No. 73No. 273A / clear cornea with sharp sides, width 3.0 mm, angled No. 73No. 274 / clear cornea with sharp sides, width 3.2 mm No. 74No. 274A / clear cornea with sharp sides, width 3.2 mm, angled No. 74
TAPERED SPEAR BLADES
Diamond Knife Diamond BladeNo. 290 / spear 4 facets with sharp sides, width 2.5-3.0 mm No. 90No. 290A / spear 4 facets with sharp sides, width 2.5-3.0 mm, angled No. 90No. 232 / spear 4 facets with sharp sides, width 2.75-3.2 mm No. 32No. 232A / spear 4 facets with sharp sides, width 2.75-3.2 mm, angled No. 32No. 240 / spear 4 facets with sharp sides, width 3.0-3.2 mm No. 40No. 240A / spear 4 facets with sharp sides, width 3.0-3.2 mm, angled No. 40No. 289 / spear 4 facets with sharp sides, width 3.2-3.5 mm No. 89No. 289A / spear 4 facets with sharp sides, width 3.2-3.5 mm, angled No. 89
TAPERED SPEAR BLADES
Diamond Knife Diamond BladeNo. 288 / spear 6 facets with sharp sides, width 2.65-3.2 mm No. 88No. 288A / spear 6 facets with sharp sides, width 2.65-3.2 mm, angled No. 88
60°
0.17width
D
B
0.17width
width
90°
60°
0.17width
0.17width
width
90°
A
A
B D
B
A
D
L
L
L
288A 288 spear 6 facets with sharp sided 2.65-3.2 4.0 0.17 90° 88
283A 283 spear 6 facets with sharp sides 3.0-3.2 4.0 0.17 90° 83
Diamond cutting instruments for microsurgery
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone 800-633-7283 fax 800-699-2839
mail: [email protected] web: www.msiprecision.com 7
B = width / L = length / D = thickness / A = angle
Diamond knives for cataract surgery (titanium bajonet handle with the j-slot mechanism)
The Amidia bayonet handle is made out of best quality titanium or medical steel material.Each diamond blade goes with a straight blade holder or a 30 degree angled holder.
drawingangled holder
straight holder description B L D A/A1 blade
straight / single edge
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 12
0.171.0
30°
0.171.0
3F
0.17width
60°
0.171.0
40°
45° 30°
• The amidia bayonet handle is made out of best quality TITAN and MEDICAL STEEL material.• Available with all diamond blades you will find in our leaflets, for pencil handle.• Each diamond blade goes with a straight blade holder, or 30 degree angled holder (A in the Article No. means 30 degree angled)
STANDARD BLADES
Diamond Knife Diamond BladeNo. 311 / straight No. 11No. 311A / straight, angled No. 11
STANDARD BLADES
Diamond Knife Diamond BladeNo. 312 / straight No. 12No. 312A / straight, angled No. 12
STANDARD BLADES
Diamond Knife Diamond BladeNo. 313 / tri-facet No. 13No. 313A / tri-facet, angled No. 13
STANDARD BLADES
Diamond Knife Diamond BladeNo. 371 / lance with blunt sides No. 71No. 371A / lance with blunt sides, angled No. 71
TITAN Bayonet Handle No. 300
0.171.0
45°
0.171.0
3F
0.17width
60°
0.171.0
40°
45° 30°
0.171.0
45°
0.171.0
30°
3F
0.17width
60°
0.171.0
40°
0.171.0
45°
0.171.0
30°
0.171.0
3F
0.17width
60°
45° 30°
B
B
B
B
A
A
AA
A
D
D
D
D
L
L
L
L
316A 316 straight 0.7 2.0 0.17 30° 16
387A 387 straight 1.0 2.0 0.17 30° 87
312A 312 straight 1.0 3.0 0.17 30° 12
364SA 364S straight 1.5 4.0 0.17 30° 64
315A 315 straight 0.7 4.0 0.17 45° 15
311A 311 straight 1.0 3.0 0.17 45° 11
310A 310 straight 1.5 3.0 0.17 45° 10
311SA 311S straight 2.0 3.0 0.17 45° 11S
tri-facet
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 12
0.171.0
30°
0.171.0
3F
0.17width
60°
0.171.0
40°
45° 30°
• The amidia bayonet handle is made out of best quality TITAN and MEDICAL STEEL material.• Available with all diamond blades you will find in our leaflets, for pencil handle.• Each diamond blade goes with a straight blade holder, or 30 degree angled holder (A in the Article No. means 30 degree angled)
STANDARD BLADES
Diamond Knife Diamond BladeNo. 311 / straight No. 11No. 311A / straight, angled No. 11
STANDARD BLADES
Diamond Knife Diamond BladeNo. 312 / straight No. 12No. 312A / straight, angled No. 12
STANDARD BLADES
Diamond Knife Diamond BladeNo. 313 / tri-facet No. 13No. 313A / tri-facet, angled No. 13
STANDARD BLADES
Diamond Knife Diamond BladeNo. 371 / lance with blunt sides No. 71No. 371A / lance with blunt sides, angled No. 71
TITAN Bayonet Handle No. 300
0.171.0
45°
0.171.0
3F
0.17width
60°
0.171.0
40°
45° 30°
0.171.0
45°
0.171.0
30°
3F
0.17width
60°
0.171.0
40°
0.171.0
45°
0.171.0
30°
0.171.0
3F
0.17width
60°
45° 30°
B
B
B
B
A
A
AA
A
D
D
D
D
L
L
L
L
317A 317 tri-facet 0.7 2.0 0.17 45°/30° 17
313A 313 tri-facet 1.0 3.0 0.17 45°/30° 13
curved324A 324 curved 4 facets 1.0 3.0 0.17 24
also available in
a peek handle
Diamond cutting instruments for microsurgery
8
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone 800-633-7283 fax 800-699-2839
mail: [email protected] web: www.msiprecision.com
B = width / L = length / D = thickness / A = angle
drawingangled holder
straight holder description B L D A/A1 blade
lance
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 12
0.171.0
30°
0.171.0
3F
0.17width
60°
0.171.0
40°
45° 30°
• The amidia bayonet handle is made out of best quality TITAN and MEDICAL STEEL material.• Available with all diamond blades you will find in our leaflets, for pencil handle.• Each diamond blade goes with a straight blade holder, or 30 degree angled holder (A in the Article No. means 30 degree angled)
STANDARD BLADES
Diamond Knife Diamond BladeNo. 311 / straight No. 11No. 311A / straight, angled No. 11
STANDARD BLADES
Diamond Knife Diamond BladeNo. 312 / straight No. 12No. 312A / straight, angled No. 12
STANDARD BLADES
Diamond Knife Diamond BladeNo. 313 / tri-facet No. 13No. 313A / tri-facet, angled No. 13
STANDARD BLADES
Diamond Knife Diamond BladeNo. 371 / lance with blunt sides No. 71No. 371A / lance with blunt sides, angled No. 71
TITAN Bayonet Handle No. 300
0.171.0
45°
0.171.0
3F
0.17width
60°
0.171.0
40°
45° 30°
0.171.0
45°
0.171.0
30°
3F
0.17width
60°
0.171.0
40°
0.171.0
45°
0.171.0
30°
0.171.0
3F
0.17width
60°
45° 30°
B
B
B
B
A
A
AA
A
D
D
D
D
L
L
L
L
348A 248 lance with blunt sides 0.9 3.0 0.17 60° 48
371A 371 lance with blunt sides 1.0 3.0 0.17 40° 71
318A 318 lance with blunt sides 1.0 2.0 0.17 60° 18
320A 320 lance with blunt sides 1.0 3.0 0.17 60° 20
314SA 314S lance with blunt sides 1.2 3.0 0.17 60° 14S
314A 314 lance with blunt sides 1.4 3.0 0.17 60° 14
321A 321 lance with blunt sides 3.2 4.0 0.17 60° 21
spear
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 13
STANDARD BLADES
Diamond Knife Diamond BladeNo. 348 / lance with blunt sides, width 0.9 mm No. 48No. 348A / lance with blunt sides, width 0.9 mm, angled No. 48No. 320 / lance with blunt sides, width 1.0 mm No. 20No. 320A / lance with blunt sides, width 1.0 mm, angled No. 20No. 314 / lance with blunt sides, width 1.4 mm No. 14No. 314A / lance with blunt sides, width 1.4 mm, angled No. 14
0.171.0
0.171.0
40°
PHACO BLADES
Diamond Knife Diamond BladeNo. 308 / spear with blunt sides, width 2.5 mm No. 08No. 308A / spear with blunt sides, width 2.5 mm, angled No. 08No. 343 / spear with blunt sides, width 2.8 mm No. 43No. 343A / spear with blunt sides, width 2.8 mm, angled No. 43No. 322 / spear with blunt sides, width 3.0 mm No. 22No. 322A / spear with blunt sides, width 3.0 mm, angled No. 22No. 323 / spear with blunt sides, width 3.2 mm No. 23No. 323A / spear with blunt sides, width 3.2 mm, angled No. 23
0.17
0.172.65
40°
1.0
0.2
Front Back
0.171.0
0.2
TUNNEL BLADES
Diamond Knife Diamond BladeNo. 339 / NEW tunnel 9 facets, width 1.4 mm No. 39No. 339A / NEW tunnel 9 facets, width 1.4 mm, angled No. 39No. 354 / tunnel 9 facets, width 2.0 mm No. 54No. 354A / tunnel 9 facets, width 2.0 mm, angled No. 54
60°
0.17width
0.42.0
0.1
0.17width
90°
A
A
D
D
D
B
B
B
L
L
L
330A 330 spear with blunt sides 1.0 2.5 0.17 90° 30
319A 319 spear with blunt sides 1.0 4.0 0.17 90° 19
329A 329 spear with blunt sides 1.4 4.0 0.17 90° 29
307A 307 spear with blunt sides 2.2 4.0 0.17 90° 07
308A 308 spear with blunt sides 2.5 4.0 0.17 90° 08
343A 343 spear with blunt sides 2.8 4.0 0.17 90° 43
322A 322 spear with blunt sides 3.0 4.0 0.17 90° 22
323A 323 spear with blunt sides 3.2 4.0 0.17 90° 23
378A 378 spear with blunt sides 3.5 4.0 0.17 90° 78
tunnel
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 13
STANDARD BLADES
Diamond Knife Diamond BladeNo. 348 / lance with blunt sides, width 0.9 mm No. 48No. 348A / lance with blunt sides, width 0.9 mm, angled No. 48No. 320 / lance with blunt sides, width 1.0 mm No. 20No. 320A / lance with blunt sides, width 1.0 mm, angled No. 20No. 314 / lance with blunt sides, width 1.4 mm No. 14No. 314A / lance with blunt sides, width 1.4 mm, angled No. 14
0.171.0
0.171.0
40°
PHACO BLADES
Diamond Knife Diamond BladeNo. 308 / spear with blunt sides, width 2.5 mm No. 08No. 308A / spear with blunt sides, width 2.5 mm, angled No. 08No. 343 / spear with blunt sides, width 2.8 mm No. 43No. 343A / spear with blunt sides, width 2.8 mm, angled No. 43No. 322 / spear with blunt sides, width 3.0 mm No. 22No. 322A / spear with blunt sides, width 3.0 mm, angled No. 22No. 323 / spear with blunt sides, width 3.2 mm No. 23No. 323A / spear with blunt sides, width 3.2 mm, angled No. 23
0.17
0.172.65
40°
1.0
0.2
Front Back
0.171.0
0.2
TUNNEL BLADES
Diamond Knife Diamond BladeNo. 339 / NEW tunnel 9 facets, width 1.4 mm No. 39No. 339A / NEW tunnel 9 facets, width 1.4 mm, angled No. 39No. 354 / tunnel 9 facets, width 2.0 mm No. 54No. 354A / tunnel 9 facets, width 2.0 mm, angled No. 54
60°
0.17width
0.42.0
0.1
0.17width
90°
A
A
D
D
D
B
B
B
L
L
L
339A 339 tunnel 19 facets 1.4 4.0 0.17 39
354A 354 tunnel 19 facets 2.0 4.0 0.17 54
358A 358 tunnel 19 facets 2.2 4.0 0.17 58
355A 355 tunnel 19 facets 2.5 4.0 0.17 55
338A 353 tunnel 19 facets 3.0 4.0 0.17 53
new clear cornea MICS micro coaxial surgery
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 8
0.17width
CLEAR CORNEA BLADES
Diamond Knife Diamond BladeNo. 298 / clear cornea with sharp sides, width 2.5 mm No. 98No. 298A / clear cornea with sharp sides, width 2.5 mm, angled No. 98No. 295 / clear cornea with sharp sides, width 2.6 mm No. 95No. 295A / clear cornea with sharp sides, width 2.6 mm, angled No. 95No. 277 / clear cornea with sharp sides, width 2.8 mm No. 77No. 277A / clear cornea with sharp sides, width 2.8 mm, angled No. 77No. 273 / clear cornea with sharp sides, width 3.0 mm No. 73No. 273A / clear cornea with sharp sides, width 3.0 mm, angled No. 73No. 274 / clear cornea with sharp sides, width 3.2 mm No. 74No. 274A / clear cornea with sharp sides, width 3.2 mm, angled No. 74
TAPERED SPEAR BLADES
Diamond Knife Diamond BladeNo. 290 / spear 4 facets with sharp sides, width 2.5-3.0 mm No. 90No. 290A / spear 4 facets with sharp sides, width 2.5-3.0 mm, angled No. 90No. 232 / spear 4 facets with sharp sides, width 2.75-3.2 mm No. 32No. 232A / spear 4 facets with sharp sides, width 2.75-3.2 mm, angled No. 32No. 240 / spear 4 facets with sharp sides, width 3.0-3.2 mm No. 40No. 240A / spear 4 facets with sharp sides, width 3.0-3.2 mm, angled No. 40No. 289 / spear 4 facets with sharp sides, width 3.2-3.5 mm No. 89No. 289A / spear 4 facets with sharp sides, width 3.2-3.5 mm, angled No. 89
TAPERED SPEAR BLADES
Diamond Knife Diamond BladeNo. 288 / spear 6 facets with sharp sides, width 2.65-3.2 mm No. 88No. 288A / spear 6 facets with sharp sides, width 2.65-3.2 mm, angled No. 88
60°
0.17width
D
B
0.17width
width
90°
60°
0.17width
0.17width
width
90°
A
A
B D
B
A
D
L
L
L
331A 331 clear cornea with sharp sides 1.6 4.0 0.17 90° 31
335A 335 clear cornea with sharp sides 1.7 4.0 0.17 90° 35
336A 336 clear cornea with sharp sides 1.8 4.0 0.17 90° 36
337A 337 clear cornea with sharp sides 1.9 4.0 0.17 90° 37
338A 338 clear cornea with sharp sides 2.0 4.0 0.17 90° 38
361A 361 clear cornea with sharp sides 2.1 4.0 0.17 90° 61
362A 362 clear cornea with sharp sides 2.2 4.0 0.17 90° 62
363A 363 clear cornea with sharp sides 2.3 4.0 0.17 90° 63
365A 365 clear cornea with sharp sides 2.4 4.0 0.17 90° 65
Diamond cutting instruments for microsurgery
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone 800-633-7283 fax 800-699-2839
mail: [email protected] web: www.msiprecision.com 9
B = width / L = length / D = thickness / A = angle
drawingangled holder
straight holder description B L D A/A1 blade
clear cornea 60°
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 8
0.17width
CLEAR CORNEA BLADES
Diamond Knife Diamond BladeNo. 298 / clear cornea with sharp sides, width 2.5 mm No. 98No. 298A / clear cornea with sharp sides, width 2.5 mm, angled No. 98No. 295 / clear cornea with sharp sides, width 2.6 mm No. 95No. 295A / clear cornea with sharp sides, width 2.6 mm, angled No. 95No. 277 / clear cornea with sharp sides, width 2.8 mm No. 77No. 277A / clear cornea with sharp sides, width 2.8 mm, angled No. 77No. 273 / clear cornea with sharp sides, width 3.0 mm No. 73No. 273A / clear cornea with sharp sides, width 3.0 mm, angled No. 73No. 274 / clear cornea with sharp sides, width 3.2 mm No. 74No. 274A / clear cornea with sharp sides, width 3.2 mm, angled No. 74
TAPERED SPEAR BLADES
Diamond Knife Diamond BladeNo. 290 / spear 4 facets with sharp sides, width 2.5-3.0 mm No. 90No. 290A / spear 4 facets with sharp sides, width 2.5-3.0 mm, angled No. 90No. 232 / spear 4 facets with sharp sides, width 2.75-3.2 mm No. 32No. 232A / spear 4 facets with sharp sides, width 2.75-3.2 mm, angled No. 32No. 240 / spear 4 facets with sharp sides, width 3.0-3.2 mm No. 40No. 240A / spear 4 facets with sharp sides, width 3.0-3.2 mm, angled No. 40No. 289 / spear 4 facets with sharp sides, width 3.2-3.5 mm No. 89No. 289A / spear 4 facets with sharp sides, width 3.2-3.5 mm, angled No. 89
TAPERED SPEAR BLADES
Diamond Knife Diamond BladeNo. 288 / spear 6 facets with sharp sides, width 2.65-3.2 mm No. 88No. 288A / spear 6 facets with sharp sides, width 2.65-3.2 mm, angled No. 88
60°
0.17width
D
B
0.17width
width
90°
60°
0.17width
0.17width
width
90°
A
A
B D
B
A
D
L
L
L
397A 397 clear cornea with sharp sides 3.0 4.0 0.17 60° 97
334A 334 clear cornea with sharp sides 3.2 4.0 0.17 60° 34
clear cornea 90°398A 398 clear cornea with sharp sides 2.5 4.0 0.17 90° 98
372A 372 clear cornea with sharp sides 2.6 4.0 0.17 90° 72
395A 395 clear cornea with sharp sides 2.65 4.0 0.17 90° 95
377A 377 clear cornea with sharp sides 2.8 4.0 0.17 90° 77
373A 373 clear cornea with sharp sides 3.0 4.0 0.17 90° 73
374A 374 clear cornea with sharp sides 3.2 4.0 0.17 90° 74
393A 393 clear cornea with sharp sides 3.5 4.0 0.17 90° 93
new tapered spear MICS micro coaxial surgery
B
B
L
D
A
379A 379 spear 4 facets with sharp sides 1.1 - 1.4 4.0 0.17 90° 79
380A 380 spear 4 facets with sharp sides 1.5 - 1.8 4.0 0.17 90° 80
382A 382 spear 4 facets with sharp sides 1.5 - 2.0 4.0 0.17 90° 82
384-01A 384-01 spear 4 facets with sharp sides 1.7 - 2.0 4.0 0.17 90° 84-01
384A 384 spear 4 facets with sharp sides 1.8 - 2.2 4.0 0.17 90° 84
384-02A 384-02 spear 4 facets with sharp sides 2.0 - 2.3 4.0 0.17 90° 84-02
384-03A 384-03 spear 4 facets with sharp sides 2.4 - 2.7 4.0 0.17 90° 84-03
tapered spear 4 facets391A 391 spear 4 facets with sharp sides 2.5 - 3.0 4.0 0.10 90° 91
B
B
L
D
A
390A 390 spear 4 facets with sharp sides 2.5 - 3.0 4.0 0.17 90° 90
392A 392 spear 4 facets with sharp sides 2.7 - 2.9 4.0 0.17 90° 92
332A 332 spear 4 facets with sharp sides 2.75 - 3.2 4.0 0.17 90° 32
340A 340 spear 4 facets with sharp sides 3.0 - 3.2 4.0 0.17 90° 40
333A 333 spear 4 facets with sharp sides 3.0 - 3.5 4.0 0.17 90° 33
389A 389 spear 4 facets with sharp sides 3.2 - 3.5 4.0 0.17 90° 89
tapered spear 6 facets
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 8
0.17width
CLEAR CORNEA BLADES
Diamond Knife Diamond BladeNo. 298 / clear cornea with sharp sides, width 2.5 mm No. 98No. 298A / clear cornea with sharp sides, width 2.5 mm, angled No. 98No. 295 / clear cornea with sharp sides, width 2.6 mm No. 95No. 295A / clear cornea with sharp sides, width 2.6 mm, angled No. 95No. 277 / clear cornea with sharp sides, width 2.8 mm No. 77No. 277A / clear cornea with sharp sides, width 2.8 mm, angled No. 77No. 273 / clear cornea with sharp sides, width 3.0 mm No. 73No. 273A / clear cornea with sharp sides, width 3.0 mm, angled No. 73No. 274 / clear cornea with sharp sides, width 3.2 mm No. 74No. 274A / clear cornea with sharp sides, width 3.2 mm, angled No. 74
TAPERED SPEAR BLADES
Diamond Knife Diamond BladeNo. 290 / spear 4 facets with sharp sides, width 2.5-3.0 mm No. 90No. 290A / spear 4 facets with sharp sides, width 2.5-3.0 mm, angled No. 90No. 232 / spear 4 facets with sharp sides, width 2.75-3.2 mm No. 32No. 232A / spear 4 facets with sharp sides, width 2.75-3.2 mm, angled No. 32No. 240 / spear 4 facets with sharp sides, width 3.0-3.2 mm No. 40No. 240A / spear 4 facets with sharp sides, width 3.0-3.2 mm, angled No. 40No. 289 / spear 4 facets with sharp sides, width 3.2-3.5 mm No. 89No. 289A / spear 4 facets with sharp sides, width 3.2-3.5 mm, angled No. 89
TAPERED SPEAR BLADES
Diamond Knife Diamond BladeNo. 288 / spear 6 facets with sharp sides, width 2.65-3.2 mm No. 88No. 288A / spear 6 facets with sharp sides, width 2.65-3.2 mm, angled No. 88
60°
0.17width
D
B
0.17width
width
90°
60°
0.17width
0.17width
width
90°
A
A
B D
B
A
D
L
L
L
388A 388 spear 6 facets with sharp sided 2.65 - 3.2 4.0 0.17 90° 88
383A 383 spear 6 facets with sharp sides 3.0 - 3.2 4.0 0.17 90° 83
Diamond cutting instruments for microsurgery
10
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone 800-633-7283 fax 800-699-2839
mail: [email protected] web: www.msiprecision.com
B = width / L = length / D = thickness / A = angle
drawing article no. description B B1 L D A blade
Zaldivar multi purpose knife
B
L
D
B1 333-01 1.0 0.55 4.5 0.17 33-01
knife with straight holder
A
B
L
D
301-01 0.5 3.5 0.2 20° 01-01
step knife
A
B
L
D
B1 820-01 1.0 0.3 3.5 0.17 25° 20-01
steps: 0.15, 0.2, 0.25, 0.3, 0.37, 0.5, 4.0
Diamond knives for glaucoma surgery
0 .504.000
0 .504.000
Diamond cutting instruments for microsurgery
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone 800-633-7283 fax 800-699-2839
mail: [email protected] web: www.msiprecision.com 11
B = width / L = length / D = thickness / A = angle
drawing article no. description B B1 L D A blade
with 3 settings: 0.5, 0.55, 0.6
B1
AL
S
DB
820-02 1.0 0.4 3 0.1 20° 20-02
with 1 setting
B1
AL
S
DB
820-02-01 0.5 1.0 0.4 3 0.1 20° 20-02
820-02-02 0.55 1.0 0.4 3 0.1 20° 20-02
820-02-03 0.6 1.0 0.4 3 0.1 20° 20-02
Donnenfeld LRI knife B B1 S D A blade
BB1
D
S
A
820-03 1 setting at 0.6 0.8 0.25 0.6 0.17 20° 20-03
Features:• singlefootplatedesignwith
a fixed depth of 0.6mm• theshorterhandle
length promotes ease of use under the microscope or at the slit lamp
• thebladeassemblyretractsintohandleforsafe storage
Nichamin LRI knife B B1 S D A blade
B
B1
D
S
A
820-04 0.8 0.2 0.6 0.1 15° 20-04
Features:• verysmallfootplate• bettervisualizationforthesurgeon• excellentcontrolwhilecreatingtheincision
• diamondwithamicroflip• accuratefortechniquesutilizingpachymetry• steps:0.45,0.5,0.55,0.6,0.65,0.7,0.75
Diamond knives for LRI surgery
0.600.550.50
0.600.550.50
00.600.650.70
00.600.650.70
Diamond cutting instruments for microsurgery
12
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone 800-633-7283 fax 800-699-2839
mail: [email protected] web: www.msiprecision.com
B = width / L = length / D = thickness / A = angle
Diamond knives with a micrometer for refractive surgeryEach depth can be adjusted without steps. The scale is divided each hundredth milimeter t = blade thickness of 0.1mm.
drawing article no. description B L D A blade
straight
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 27
0.171.0
30°
0.171.0
3F
0.171.5
45 °
0.171.0
45° 30°
• The amidia micrometer handle is made out of best quality TITAN and MEDICAL STEEL material.• Each depth of the blade can be adjusted without steps. The scale is divided each hundredth millimeter.• Available with all diamond blades you will find in our leaflets, for micrometer handle.
STANDARD BLADES
Diamond Knife Diamond BladeNo. 511 / straight No. 11No. 511T / straight No. 11
STANDARD BLADES
Diamond Knife Diamond BladeNo. 512 / straight No. 12No. 512T / straight No. 12
STANDARD BLADES
Diamond Knife Diamond BladeNo. 513 / tri-facet No. 13No. 513T / tri-facet No. 13
STANDARD BLADES
Diamond Knife Diamond BladeNo. 525 / axe No. 25No. 525T / axe No. 25
STANDARD BLADES
Diamond Knife Diamond BladeNo. 526 / triple edge vertical No. 26No. 526T / triple edge vertical No. 26
TITAN Micrometer Handle No. 500
0.171.0
45°
0.171.0
3F
0.171.5
45°
0.171.0
45° 30°
0.171.0
45°
0.171.0
30°
3F
0.171.5
45°
0.171.0
0.171.0
45°
0.171.0
30°
0.171.0
3F
0.171.0
45° 30°
0.171.0
45°
0.171.0
30°
0.171.0
3F
0.171.5
45°
45° 30°
A
A A
A
B
B
B
B
B D
D
D
D
D
A
L
L
L
L
L
511 straight 1.0 3.0 0.17 45° 11
511t straight 0.9 3.0 0.1 45° 11t
512 straight 1.0 3.0 0.17 30° 12
512t straight 1.0 3.0 0.1 30° 12t
tri-facet
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 27
0.171.0
30°
0.171.0
3F
0.171.5
45 °
0.171.0
45° 30°
• The amidia micrometer handle is made out of best quality TITAN and MEDICAL STEEL material.• Each depth of the blade can be adjusted without steps. The scale is divided each hundredth millimeter.• Available with all diamond blades you will find in our leaflets, for micrometer handle.
STANDARD BLADES
Diamond Knife Diamond BladeNo. 511 / straight No. 11No. 511T / straight No. 11
STANDARD BLADES
Diamond Knife Diamond BladeNo. 512 / straight No. 12No. 512T / straight No. 12
STANDARD BLADES
Diamond Knife Diamond BladeNo. 513 / tri-facet No. 13No. 513T / tri-facet No. 13
STANDARD BLADES
Diamond Knife Diamond BladeNo. 525 / axe No. 25No. 525T / axe No. 25
STANDARD BLADES
Diamond Knife Diamond BladeNo. 526 / triple edge vertical No. 26No. 526T / triple edge vertical No. 26
TITAN Micrometer Handle No. 500
0.171.0
45°
0.171.0
3F
0.171.5
45°
0.171.0
45° 30°
0.171.0
45°
0.171.0
30°
3F
0.171.5
45°
0.171.0
0.171.0
45°
0.171.0
30°
0.171.0
3F
0.171.0
45° 30°
0.171.0
45°
0.171.0
30°
0.171.0
3F
0.171.5
45°
45° 30°
A
A A
A
B
B
B
B
B D
D
D
D
D
A
L
L
L
L
L
513 tri-facet 1.0 3.0 0.17 45° / 30° 13
513t tri-facet 1.0 3.0 0.1 45° / 30° 13t
axe
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 27
0.171.0
30°
0.171.0
3F
0.171.5
45 °
0.171.0
45° 30°
• The amidia micrometer handle is made out of best quality TITAN and MEDICAL STEEL material.• Each depth of the blade can be adjusted without steps. The scale is divided each hundredth millimeter.• Available with all diamond blades you will find in our leaflets, for micrometer handle.
STANDARD BLADES
Diamond Knife Diamond BladeNo. 511 / straight No. 11No. 511T / straight No. 11
STANDARD BLADES
Diamond Knife Diamond BladeNo. 512 / straight No. 12No. 512T / straight No. 12
STANDARD BLADES
Diamond Knife Diamond BladeNo. 513 / tri-facet No. 13No. 513T / tri-facet No. 13
STANDARD BLADES
Diamond Knife Diamond BladeNo. 525 / axe No. 25No. 525T / axe No. 25
STANDARD BLADES
Diamond Knife Diamond BladeNo. 526 / triple edge vertical No. 26No. 526T / triple edge vertical No. 26
TITAN Micrometer Handle No. 500
0.171.0
45°
0.171.0
3F
0.171.5
45°
0.171.0
45° 30°
0.171.0
45°
0.171.0
30°
3F
0.171.5
45°
0.171.0
0.171.0
45°
0.171.0
30°
0.171.0
3F
0.171.0
45° 30°
0.171.0
45°
0.171.0
30°
0.171.0
3F
0.171.5
45°
45° 30°
A
A A
A
B
B
B
B
B D
D
D
D
D
A
L
L
L
L
L
525 axe 1.5 3.0 0.17 45° 25
525t axe 1.5 3.0 0.1 45° 25t
triple edge vertial
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 27
0.171.0
30°
0.171.0
3F
0.171.5
45 °
0.171.0
45° 30°
• The amidia micrometer handle is made out of best quality TITAN and MEDICAL STEEL material.• Each depth of the blade can be adjusted without steps. The scale is divided each hundredth millimeter.• Available with all diamond blades you will find in our leaflets, for micrometer handle.
STANDARD BLADES
Diamond Knife Diamond BladeNo. 511 / straight No. 11No. 511T / straight No. 11
STANDARD BLADES
Diamond Knife Diamond BladeNo. 512 / straight No. 12No. 512T / straight No. 12
STANDARD BLADES
Diamond Knife Diamond BladeNo. 513 / tri-facet No. 13No. 513T / tri-facet No. 13
STANDARD BLADES
Diamond Knife Diamond BladeNo. 525 / axe No. 25No. 525T / axe No. 25
STANDARD BLADES
Diamond Knife Diamond BladeNo. 526 / triple edge vertical No. 26No. 526T / triple edge vertical No. 26
TITAN Micrometer Handle No. 500
0.171.0
45°
0.171.0
3F
0.171.5
45°
0.171.0
45° 30°
0.171.0
45°
0.171.0
30°
3F
0.171.5
45°
0.171.0
0.171.0
45°
0.171.0
30°
0.171.0
3F
0.171.0
45° 30°
0.171.0
45°
0.171.0
30°
0.171.0
3F
0.171.5
45°
45° 30°
A
A A
A
B
B
B
B
B D
D
D
D
D
A
L
L
L
L
L
526 triple edge vertical 1.0 3.0 0.17 26
526t triple edge vertical 1.0 3.0 0.1 26t
15
2015
253015
2015
2530
Diamond cutting instruments for microsurgery
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone 800-633-7283fax 800-699-2839
mail: [email protected] web: www.msiprecision.com 13
B = width / L = length / D = thickness / A = angle
drawing article no. description B L D A blade
double edge vertical
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 28
0.171.0
45°
0.171.0
0.171.0
45°
0.25
0.2
15°
STANDARD BLADES
Diamond Knife Diamond BladeNo. 527 / double edge vertical No. 27No. 527T / double edge vertical No. 27
STANDARD BLADES
Diamond Knife Diamond BladeNo. 528 / single edge vertical No. 28No. 528T / single edge vertical No. 28
STANDARD BLADES
Diamond Knife Diamond BladeNo. 533T / arcuate (Thornton) No. 33
STANDARD BLADES
Diamond Knife Diamond BladeNo. 566 / amidia-trak No. 66
0.171.0
45°
0.171.0
0.171.0
45°
0.25
0.2
15°
0.171.0
45°
0.171.0
45°
0.171.0
45°
0.25
0.2
0.171.0
45°
0.171.0
45°
0.171.0
0.25
0.2
15°
A
A
A
A
D
D
D
D
B
B
B
B
L
L
L
L
527 double edge vertical 1.0 3.0 0.17 45° 27
527t double edge vertical 1.0 3.0 0.1 45° 27t
single edge vertical
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 28
0.171.0
45°
0.171.0
0.171.0
45°
0.25
0.2
15°
STANDARD BLADES
Diamond Knife Diamond BladeNo. 527 / double edge vertical No. 27No. 527T / double edge vertical No. 27
STANDARD BLADES
Diamond Knife Diamond BladeNo. 528 / single edge vertical No. 28No. 528T / single edge vertical No. 28
STANDARD BLADES
Diamond Knife Diamond BladeNo. 533T / arcuate (Thornton) No. 33
STANDARD BLADES
Diamond Knife Diamond BladeNo. 566 / amidia-trak No. 66
0.171.0
45°
0.171.0
0.171.0
45°
0.25
0.2
15°
0.171.0
45°
0.171.0
45°
0.171.0
45°
0.25
0.2
0.171.0
45°
0.171.0
45°
0.171.0
0.25
0.2
15°
A
A
A
A
D
D
D
D
B
B
B
B
L
L
L
L
528 single edge vertical 1.0 3.0 0.17 45“ 28
528t single edge vertical 1.0 3.0 0.1 45“ 28t
arcuate (thornton)
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 28
0.171.0
45°
0.171.0
0.171.0
45°
0.25
0.2
15°
STANDARD BLADES
Diamond Knife Diamond BladeNo. 527 / double edge vertical No. 27No. 527T / double edge vertical No. 27
STANDARD BLADES
Diamond Knife Diamond BladeNo. 528 / single edge vertical No. 28No. 528T / single edge vertical No. 28
STANDARD BLADES
Diamond Knife Diamond BladeNo. 533T / arcuate (Thornton) No. 33
STANDARD BLADES
Diamond Knife Diamond BladeNo. 566 / amidia-trak No. 66
0.171.0
45°
0.171.0
0.171.0
45°
0.25
0.2
15°
0.171.0
45°
0.171.0
45°
0.171.0
45°
0.25
0.2
0.171.0
45°
0.171.0
45°
0.171.0
0.25
0.2
15°
A
A
A
A
D
D
D
D
B
B
B
B
L
L
L
L
533t arcuate (thornton) 1.0 3.0 0.1 15° 33t
amidia trak
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 28
0.171.0
45°
0.171.0
0.171.0
45°
0.25
0.2
15°
STANDARD BLADES
Diamond Knife Diamond BladeNo. 527 / double edge vertical No. 27No. 527T / double edge vertical No. 27
STANDARD BLADES
Diamond Knife Diamond BladeNo. 528 / single edge vertical No. 28No. 528T / single edge vertical No. 28
STANDARD BLADES
Diamond Knife Diamond BladeNo. 533T / arcuate (Thornton) No. 33
STANDARD BLADES
Diamond Knife Diamond BladeNo. 566 / amidia-trak No. 66
0.171.0
45°
0.171.0
0.171.0
45°
0.25
0.2
15°
0.171.0
45°
0.171.0
45°
0.171.0
45°
0.25
0.2
0.171.0
45°
0.171.0
45°
0.171.0
0.25
0.2
15°
A
A
A
A
D
D
D
D
B
B
B
B
L
L
L
L
566 amidia-trak 1.0 3.0 0.17 45° 66
15
2015
253015
2015
2530
Diamond cutting instruments for microsurgery
14
MSI Precision Specialty Instruments1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone 800-633-7283fax 800-699-2839
mail: [email protected] web: www.msiprecision.com
B = width / L = length / D = thickness / A = angle
Diamond knives for retinal surgery(with a titanium handle)
We also manufacture to client specification.
drawing article no. description B L D A blade
B
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 20
TITAN Retina Handle No. 300
• The amidia retina handle is made out of TITAN bayonet and used predominantly for Glaucoma surgery.• Available with all diamond blades you will find in our leaflets, for retina handle.• We also manufacture to client specifications.
STANDARD BLADES
Diamond Knife Diamond BladeNo. 301 / NEW retina straight No. 01
STANDARD BLADES
Diamond Knife Diamond BladeNo. 302 / NEW retina straight No. 02
0.170.9
45°
0.170.5
20°
0.170.9
45°
A
B D
L
301R retina straight 0.5 3.0 0.17 20° 1
302R retina straight 0.9 3.0 0.17 45° 2
311R straight 45° (retinal) 1.0 4.0 0.17 45° 11
Diamond cutting instruments for microsurgery
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34Phoenixville, PA 19460
phone 800-633-7283 fax 800-699-2839
mail: [email protected] web: www.msiprecision.com 15
B = width / L = length / D = thickness / A = angle
Step diamond knivesAvailablewithalldiamondbladesyouwillfindinourleafletsforsevenstephandle.
drawing article no. description B L D A blade
straight
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 32
TITAN Seven-Step Handle No. 800
90°
60°
0.11.0
3F
0.171.0
45°
0.17width
0.17width
°
• The amidia seven-step handle is made out of best quality TITAN and MEDICAL STEEL material.• Available with all diamond blades and different depths you will find in our leaflets, for seven-step handle.
STANDARD BLADES
Diamond Knife Diamond BladeNo. 811 / straight, depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm No. 11
STANDARD BLADES
Diamond Knife Diamond BladeNo. 813 / tri-facet, depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm No. 13
STANDARD BLADES
Diamond Knife Diamond BladeNo. 827 / double edge vertical, depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm No. 27
PHACO BLADES
Diamond Knife Diamond BladeNo. 822 / spear with blunt sides, width 3.0 mm No. 22No. 823 / spear with blunt sides, width 3.2 mm No. 23
PHACO BLADES
Diamond Knife Diamond BladeNo. 885 / lance with blunt sides, width 3.0 mm No. 85No. 821 / lance with blunt sides, width 3.2 mm No. 21
90°
60°
3F
0.171.0
45°
0.17width
0.17width
90°
60°
3F
0.17width
0.17width
60°
7
3F
0.171.0
45°
7width
°
7
°
3F
0.171.0
45°
°
A
AA
A
A
A
B
B
B
B
B D
D
D
D
D
L
L
L
L
L
811 straight 1.0 3.0 0.17 45° 11
steps at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm
tri-facet
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 32
TITAN Seven-Step Handle No. 800
90°
60°
0.11.0
3F
0.171.0
45°
0.17width
0.17width
°
• The amidia seven-step handle is made out of best quality TITAN and MEDICAL STEEL material.• Available with all diamond blades and different depths you will find in our leaflets, for seven-step handle.
STANDARD BLADES
Diamond Knife Diamond BladeNo. 811 / straight, depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm No. 11
STANDARD BLADES
Diamond Knife Diamond BladeNo. 813 / tri-facet, depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm No. 13
STANDARD BLADES
Diamond Knife Diamond BladeNo. 827 / double edge vertical, depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm No. 27
PHACO BLADES
Diamond Knife Diamond BladeNo. 822 / spear with blunt sides, width 3.0 mm No. 22No. 823 / spear with blunt sides, width 3.2 mm No. 23
PHACO BLADES
Diamond Knife Diamond BladeNo. 885 / lance with blunt sides, width 3.0 mm No. 85No. 821 / lance with blunt sides, width 3.2 mm No. 21
90°
60°
3F
0.171.0
45°
0.17width
0.17width
90°
60°
3F
0.17width
0.17width
60°
7
3F
0.171.0
45°
7width
°
7
°
3F
0.171.0
45°
°
A
AA
A
A
A
B
B
B
B
B D
D
D
D
D
L
L
L
L
L
813 tri-facet 1.0 3.0 0.17 45° / 30° 13
steps at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm
double edge vertical
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 32
TITAN Seven-Step Handle No. 800
90°
60°
0.11.0
3F
0.171.0
45°
0.17width
0.17width
°
• The amidia seven-step handle is made out of best quality TITAN and MEDICAL STEEL material.• Available with all diamond blades and different depths you will find in our leaflets, for seven-step handle.
STANDARD BLADES
Diamond Knife Diamond BladeNo. 811 / straight, depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm No. 11
STANDARD BLADES
Diamond Knife Diamond BladeNo. 813 / tri-facet, depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm No. 13
STANDARD BLADES
Diamond Knife Diamond BladeNo. 827 / double edge vertical, depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm No. 27
PHACO BLADES
Diamond Knife Diamond BladeNo. 822 / spear with blunt sides, width 3.0 mm No. 22No. 823 / spear with blunt sides, width 3.2 mm No. 23
PHACO BLADES
Diamond Knife Diamond BladeNo. 885 / lance with blunt sides, width 3.0 mm No. 85No. 821 / lance with blunt sides, width 3.2 mm No. 21
90°
60°
3F
0.171.0
45°
0.17width
0.17width
90°
60°
3F
0.17width
0.17width
60°
7
3F
0.171.0
45°
7width
°
7
°
3F
0.171.0
45°
°
A
AA
A
A
A
B
B
B
B
B D
D
D
D
D
L
L
L
L
L
827 double edge vertical 1.0 3.0 0.17 45° 27
steps at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm
spear
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 32
TITAN Seven-Step Handle No. 800
90°
60°
0.11.0
3F
0.171.0
45°
0.17width
0.17width
°
• The amidia seven-step handle is made out of best quality TITAN and MEDICAL STEEL material.• Available with all diamond blades and different depths you will find in our leaflets, for seven-step handle.
STANDARD BLADES
Diamond Knife Diamond BladeNo. 811 / straight, depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm No. 11
STANDARD BLADES
Diamond Knife Diamond BladeNo. 813 / tri-facet, depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm No. 13
STANDARD BLADES
Diamond Knife Diamond BladeNo. 827 / double edge vertical, depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm No. 27
PHACO BLADES
Diamond Knife Diamond BladeNo. 822 / spear with blunt sides, width 3.0 mm No. 22No. 823 / spear with blunt sides, width 3.2 mm No. 23
PHACO BLADES
Diamond Knife Diamond BladeNo. 885 / lance with blunt sides, width 3.0 mm No. 85No. 821 / lance with blunt sides, width 3.2 mm No. 21
90°
60°
3F
0.171.0
45°
0.17width
0.17width
90°
60°
3F
0.17width
0.17width
60°
7
3F
0.171.0
45°
7width
°
7
°
3F
0.171.0
45°
°
A
AA
A
A
A
B
B
B
B
B D
D
D
D
D
L
L
L
L
L
822 spear with blunt sides 3.0 4.0 0.17 45° 22
823 spear with blunt sides 3.2 4.0 0.17 45° 23
steps at 0.15/0.2/0.25/0.3/0.37/0.5/4.0 mm
0 .801.002.50
0 .801.002.50
Diamond cutting instruments for microsurgery
16
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34Phoenixville, PA 19460
phone 800-633-7283 fax 800-699-2839
mail: [email protected]: www.msiprecision.com
B = width / L = length / D = thickness / A = angle
drawing article no. description B L D A blade
lance
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 12
0.171.0
30°
0.171.0
3F
0.17width
60°
0.171.0
40°
45° 30°
• The amidia bayonet handle is made out of best quality TITAN and MEDICAL STEEL material.• Available with all diamond blades you will find in our leaflets, for pencil handle.• Each diamond blade goes with a straight blade holder, or 30 degree angled holder (A in the Article No. means 30 degree angled)
STANDARD BLADES
Diamond Knife Diamond BladeNo. 311 / straight No. 11No. 311A / straight, angled No. 11
STANDARD BLADES
Diamond Knife Diamond BladeNo. 312 / straight No. 12No. 312A / straight, angled No. 12
STANDARD BLADES
Diamond Knife Diamond BladeNo. 313 / tri-facet No. 13No. 313A / tri-facet, angled No. 13
STANDARD BLADES
Diamond Knife Diamond BladeNo. 371 / lance with blunt sides No. 71No. 371A / lance with blunt sides, angled No. 71
TITAN Bayonet Handle No. 300
0.171.0
45°
0.171.0
3F
0.17width
60°
0.171.0
40°
45° 30°
0.171.0
45°
0.171.0
30°
3F
0.17width
60°
0.171.0
40°
0.171.0
45°
0.171.0
30°
0.171.0
3F
0.17width
60°
45° 30°
B
B
B
B
A
A
AA
A
D
D
D
D
L
L
L
L
885 lance with blunt sides 3.0 4.0 0.17 60° 85
821 lance with blunt sides 3.2 4.0 0.17 60° 21
clear cornea 60°
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 33
CLEAR CORNEA BLADES
Diamond Knife Diamond BladeNo. 898 / clear cornea with sharp sides, width 2.5 mm No. 98No. 895 / clear cornea with sharp sides, width 2.6 mm No. 95No. 877 / clear cornea with sharp sides, width 2.8 mm No. 77No. 873 / clear cornea with sharp sides, width 3.0 mm No. 73No. 874 / clear cornea with sharp sides, width 3.2 mm No. 74
60°
0.172.65
40°
0.171.0
0.2
0.17width
A
B D
L
897 clear cornea with sharp sides 3.0 4.0 0.17 60° 97
834 clear cornea with sharp sides 3.2 4.0 0.17 60° 34
clear cornea 90°898 clear cornea with sharp sides 2.5 3.5 0.17 90° 98
895 clear cornea with sharp sides 2.6 3.5 0.17 90° 95
877 clear cornea with sharp sides 2.8 3.5 0.17 90° 77
873 clear cornea with sharp sides 3.0 3.5 0.17 90° 73
874 clear cornea with sharp sides 3.2 3.5 0.17 90° 74
Glaucoma B B1 L D A blade
A
B
L
D
B1 820-01 1.0 0.3 3.5 0.17 25° 20-01
steps: 0.15, 0.2, 0.25, 0.3, 0.37, 0.5, 4.0
one step handle tri-facet
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 10
TITAN One-Step Handle No. 200/300
• The amidia one-step handle is made out of best quality TITAN and MEDICAL STEEL material.• Available with the pencil mechanism (No. 200) or the bayonet mechanism (No. 300).• With a depth of 0.28 mm or 0.3 mm.• Available with all diamond blades you will find in our leaflets, for step handle.
STANDARD BLADES
Diamond Knife (ECONOMY) Diamond BladeNo. 309 / tri-facet, depth at 0.28 mm, not resharpable No. 09No. 209 / tri-facet, depth at 0.3 mm, not resharpable No. 09
STANDARD BLADES
Diamond Knife (ECONOMY) Diamond BladeNo. 315 / straight, depth at 0.28 mm, not resharpable No. 15No. 215 / straight, depth at 0.3 mm, not resharpable No. 15
45°
0.171.0
60°
0.170.7
45°
0.171.0
60°
0.170.7
309-F tri-facet, depth at 0.28 1.0 0.17 60° 9
209-F tri-facet, depth at 0.3 1.0 0.17 60° 9
one step handle straight
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 10
TITAN One-Step Handle No. 200/300
• The amidia one-step handle is made out of best quality TITAN and MEDICAL STEEL material.• Available with the pencil mechanism (No. 200) or the bayonet mechanism (No. 300).• With a depth of 0.28 mm or 0.3 mm.• Available with all diamond blades you will find in our leaflets, for step handle.
STANDARD BLADES
Diamond Knife (ECONOMY) Diamond BladeNo. 309 / tri-facet, depth at 0.28 mm, not resharpable No. 09No. 209 / tri-facet, depth at 0.3 mm, not resharpable No. 09
STANDARD BLADES
Diamond Knife (ECONOMY) Diamond BladeNo. 315 / straight, depth at 0.28 mm, not resharpable No. 15No. 215 / straight, depth at 0.3 mm, not resharpable No. 15
45°
0.171.0
60°
0.170.7
45°
0.171.0
60°
0.170.7
315-F straight, depth at 0.28 0.7 0.17 45° 15
215-F straight, depth at 0.3 0.7 0.17 45° 15
0 .504.000
0 .504.000
Diamond cutting instruments for microsurgery
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone 800-633-7283 fax 800-699-2839
mail: [email protected] web: www.msiprecision.com 17
B = width / L = length / D = thickness / A = angle
Diamond knives for neuro surgeryThe amidia neuro surgery handles are available with a straight or angled holder.
drawing article no. description B L D A blade
angled straight
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 35
TITAN Neuro Handle No. N200
°
°
• Superior performance, unmatched precision • For more information, contact us today!
STANDARD BLADES
Diamond Knife Diamond BladeNo. N267 / straight, 45˚ single sided, 1.0 x 0.17 x 6 mm No. 67
STANDARD BLADES
Diamond Knife Diamond BladeNo. N268 / Lance 60˚ single sided, 1.0 x 0.17 . 6 mm No. 68
STANDARD BLADES
Diamond Knife Diamond BladeNo. N269 / round 7 facets, single sided, 1.0 x 0.17 x 6 mm No. 69
SPECIAL BLADES
Diamond Knife Diamond BladeNo. N281 / special straight, 60˚, 1.45 x 0.17 x 1.8 mm No. 81
°
°
A
A
A
B
B
B
B D
D
D
D
L
L
L
N250A N250 straight, single sided 1.0 3.0 0.17 30° 50
N267A N267 straight, single sided 1.0 3.0 0.17 45° 67
lance
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 35
TITAN Neuro Handle No. N200
°
°
• Superior performance, unmatched precision • For more information, contact us today!
STANDARD BLADES
Diamond Knife Diamond BladeNo. N267 / straight, 45˚ single sided, 1.0 x 0.17 x 6 mm No. 67
STANDARD BLADES
Diamond Knife Diamond BladeNo. N268 / Lance 60˚ single sided, 1.0 x 0.17 . 6 mm No. 68
STANDARD BLADES
Diamond Knife Diamond BladeNo. N269 / round 7 facets, single sided, 1.0 x 0.17 x 6 mm No. 69
SPECIAL BLADES
Diamond Knife Diamond BladeNo. N281 / special straight, 60˚, 1.45 x 0.17 x 1.8 mm No. 81
°
°
A
A
A
B
B
B
B D
D
D
D
L
L
L
N268A N268 lance, single sided 1.0 3.0 0.17 60° 68
N251A N251 lance, single sided 1.4 3.0 0.17 60° 51
round
DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RG E RY
Amidia AG Telefon | Fax InternetMattenstrasse 11 +41 32 333 24 74 [email protected] Brügg +41 32 333 24 76 www.amidia.chSwitzerland
08 |
08
Page 35
TITAN Neuro Handle No. N200
°
°
• Superior performance, unmatched precision • For more information, contact us today!
STANDARD BLADES
Diamond Knife Diamond BladeNo. N267 / straight, 45˚ single sided, 1.0 x 0.17 x 6 mm No. 67
STANDARD BLADES
Diamond Knife Diamond BladeNo. N268 / Lance 60˚ single sided, 1.0 x 0.17 . 6 mm No. 68
STANDARD BLADES
Diamond Knife Diamond BladeNo. N269 / round 7 facets, single sided, 1.0 x 0.17 x 6 mm No. 69
SPECIAL BLADES
Diamond Knife Diamond BladeNo. N281 / special straight, 60˚, 1.45 x 0.17 x 1.8 mm No. 81
°
°
A
A
A
B
B
B
B D
D
D
D
L
L
L
N269A N269 round 7 facets single sided 1.0 4.0 0.17 69
amidia
amidia
15°15°
Diamond cutting instruments for microsurgery
18
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone 800-633-7283 fax 800-699-2839
mail: [email protected] web: www.msiprecision.com
B = width / L = length / D = thickness / A = angle
Zeppelin diamond knife for neuro surgeryFor extremly delicate micro-incisions and dissections. The cutting edges are distinguished by their superb sharpness.
drawing article no. description B L D A blade
A
B
L
D
PDD 011lance diamond knife, straight sharp, slightly upward angled tip 15% working/total length 50 mm/170 mm
1.40 4.0 0.17 60° A-51
PDD 111lance diamond knife, straight sharp, slightly upward angled tip 15% working/total length 100 mm/220 mm
1.40 4.0 0.17 60° A-51
A
DB
PDD 112triple edge vertical diamond knife, straight, tip blunt, 90° angled working total length 100 mm/220 mm
1.40 4.0 0.17 60° A-81
PDD 113triple edge vertical diamond knife, straight, tip sharp, 90° angled working total length 100 mm/220 mm
1.40 4.0 0.17 60° A-81
To order please contact MSI Precision Specialty Instruments1220 Valley Forge RoadBuilding 34Phoenixville, PA 19460
phone 800-633-7283fax 800-699-2839e-mail [email protected] www.msiprecision.com
Diamond cutting instruments for microsurgery
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone 800-633-7283 fax 800-699-2839
mail: [email protected] web: www.msiprecision.com 19
B = width / L = length / D = thickness / A = angle
drawing article no. description B L D A blade
A
B
L
DPDD 211
lance diamond knife, straight sharp, slightly upward angled tip 15% working/total length 120 mm/220 mm
1.40 4.0 0.17 60° A-51
A
B
L
D
PDD 311lance diamond knife, straight sharp, slightly upward angled tip 15% working/total length 100 mm/220 mm
1.40 4.0 0.17 60° A-51
PDD 411lance diamond knife, straight sharp, slightly upward angled tip 15% working/total length 120 mm/240 mm
1.40 4.0 0.17 60° A-51
PDD 511lance diamond knife, straight sharp, slightly upward angled tip 15% working/total length 140 mm/260 mm
1.40 4.0 0.17 60° A-51
A
B
L
D
PDD 611vario diamond knife bayonet, sharp, slightly upward angled tip (15°) working/total length 150 mm/270
1.40 4.0 0.17 60° A-51
PDD 711vario diamond knife bayonet, sharp, slightly upward angled tip (15°) working/total length 120 mm/240
1.40 4.0 0.17 60° A-51
To order please contact MSI Precision Specialty Instruments1220 Valley Forge RoadBuilding 34Phoenixville, PA 19460
phone 800-633-7283fax 800-699-2839e-mail [email protected] www.msiprecision.com
Diamond cutting instruments for microsurgery
20
MSI Precision Specialty Instruments1220 Valley Forge Rd. Bldg 34Phoenixville, PA 19460
phone 800-633-7283 fax 800-699-2839
mail: [email protected] web: www.msiprecision.com
B = width / L = length / D = thickness / A = angle
Diamond knife for neuro surgery dura knife for dura opening
•Easyandfastcuttingthankstotheextremelysharpdiamondblade
•Thepreciselyadjustablecuttingdepthallowsasafeprocedure
•Consistentcuttingcapabilitiesevenafteryearsofuse
•Handlemadeoftitaniumandsurfacecoatedinhighvacuum
000.30DURA
000.30DURA
D B
L
article no. N269-01
0.30 DURA
Diamond cutting instruments for microsurgery
MSI Precision Specialty Instruments1220 Valley Forge Rd. Bldg 34Phoenixville, PA 19460
phone 800-633-7283fax 800-699-2839
mail: [email protected] web: www.msiprecision.com 21
B = width / L = length / D = thickness / A = angle
Cosmetic diamond knives for plastic surgeryCosmetic scalpels are much sharper than steel blades and they keep their sharpness even after many procedures. This enables the surgeon to have the highest precision and the cleanest cut available. Incisions with diamond scalpels are easier to make; wounds heal better and faster.
#15
#11article no. PABD1311
article no. PABD1315
Diamond cutting instruments for microsurgery
22
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone 800-633-7283 fax 800-699-2839
mail: [email protected]: www.msiprecision.com
B = width / L = length / D = thickness / A = angle
Black diamond knives•Bettervisualization•Non-glaresurface•Consistent,predictable&superior diamond edge incision•Reducedacquisitioncost•Reducedrepaircost•Availableintitaniumorpeekhandles
drawing article no. description B L D A blade
lance
DB
AL
CVD-1010-Titan lance 1.0 4.0 0.20 60° 1010
CVD-1010-Peek lance 1.0 4.0 0.20 60° 1010
CVD-1012-Titan lance 1.2 4.0 0.20 60° 1012
CVD-1012 Peek lance 1.2 4.0 0.20 60° 1012
trapezoid
DB
A
L
CVD-1175-Titan tapered spear 1.5-1.8 4.0 0.20 90° 1175
CVD-1175-Peek tapered spear 1.5-1.8 4.0 0.20 90° 1175
CVD-1180-Titan tapered spear 2.5-2.8 4.0 0.20 90° 1180
CVD-1180-Peek tapered spear 2.5-2.8 4.0 0.20 90° 1180
CVD-1182-Titan tapered spear 2.65-3.0 4.0 0.20 90° 1182
CVD-1182-Peek tapered spear 2.65-3.0 4.0 0.20 90° 1182
CVD-1183-Titan tapered spear 2.8-3.0 4.0 0.20 90° 1183
CVD-1183-Peek tapered spear 2.8.3.0 4.0 0.20 90° 1183
CVD-1184-Titan tapered spear 2.7-3.2 4.0 0.20 90° 1184
CVD-1184-Peek tapered spear 2.7.-3.2 4.0 0.20 90° 1184
CVD-1185-Titan tapered spear 2.5-3.5 4.0 0.20 90° 1185
CVD-1185-Peek tapered spear 2.5-3.5 4.0 0.20 90° 1185
spear 2 side sharp
DB
A
L
CVD-1120-Titan spear 2.8 4.0 0.20 90° 1120
CVD-1120-Peek spear 2.8 4.0 0.20 90° 1120
CVD-1123-Titan spear 3.0 4.0 0.20 90° 1123
CVD-1123-Peek spear 3.0 4.0 0.20 90° 1123
CVD-1125-Titan spear 3.2 4.0 0.20 90° 1125
CVD-1125-Peek spear 3.2 4.0 0.20 90° 1125
Diamond cutting instruments for microsurgery
MSI Precision Specialty Instruments1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone 800-633-7283fax 800-699-2839
mail: [email protected] web: www.msiprecision.com 23
B = width / L = length / D = thickness / A = angle
drawing article no. description B L D A blade
clear Conea - 4 sides sharp
DB
AL
CVD-1150-Titan spear vc 2.20 4.0 0.20 90° 1150
CVD-1150-Peek spear vc 2.20 4.0 0.20 90° 1150
CVD-1158-Titan spear vc 2.65 4.0 0.20 90° 1158
CVD-1158-Peek spear vc 2.65 4.0 0.20 90° 1158
CVD-1160-Titan spear vc 2.80 4.0 0.20 90° 1160
CVD-1160-Peek spear vc 2.80 4.0 0.20 90° 1160
CVD-1162-Titan spear vc 3.0 4.0 0.20 90° 1162
CVD-1162-Peek spear vc 3.0 4.0 0.20 90° 1162
CVD-1164-Titan spear vc 3.20 4.0 0.20 90° 1164
CVD-1164-Peek spear vc 3.20 4.0 0.20 90° 1164
crescent
DB
L
CVD-1210 Titan 9-edge vertical 2.0 4.0 0.20 1210
CVD-1210-Peek 9-edge vertical 2.0 4.0 0.20 1210
Black diamond knives•Bettervisualization•Non-glaresurface•Consistent,predictable&superior diamond edge incision•Reducedacquisitioncost•Reducedrepaircost•Availableintitaniumorpeekhandles
Diamond cutting instruments for microsurgery
24
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460 fax 800-699-2839
phone 800-633-7283
mail: [email protected]
web: www.msiprecision.com
0.30
0.40
0.30
0.40
0.3
0.4
0.6
0.5
51 0
0.5
1.5
51 0
0.5
1.5
51 0
0.5
1.5
5
0.5
1.5
5
0.5
1.5
cleaner
Amidia rapid cleaner is the recommended cleaning liquid for the diamond knives9000 rapid cleaner 250ml
9001 rapid cleaner 500ml
9002 rapid cleaner 1000ml
cleaning sticks
Amidia cleaning sticks to remove the particles from the blade9014 1setofcleaningsticks(5piecesofstyroporwithrazorblade)
measuring gauge600 measuring gauge type RK
Cleaning liquid & accessories
600
Diamond cutting instruments for microsurgery
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone 800-633-7283 fax 800-699-2839
mail: [email protected]: :: www.msiprecision.com 25
unitholder
Amidia unitholders are designed to hold the instruments for easy cleaning 9010 4.6 mm / 6 pcs. of pencil, titan bayonet, one step, 3 settings step and micrometer
9011 6.5 mm / 6 pcs. of retinal, seven step
9012 4.6 mm / 1 pc. of pencil, titan bayonet, one step, 3 settings step and micrometer
9013 6.5 mm / 1 pcs. of retinal, seven step
The unitholders are designed to position the knives into a ultrasound cleaner.
Unitholder
article no. 9010/9011
article no. 9012/9013
Diamond cutting instruments for microsurgery
26
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34Phoenixville, PA 19460
phone 800-633-7283fax 800-699-2839
mail: [email protected]: www.msiprecision.com
Preparation (cleaning, disinfecting and sterilization) of diamond knives from Amidia Ltd.
General basic principlesThediamondknivesmustbecleaned,disinfectedandsterilizedbeforehandeverytimetheyareused;thisparticularlyappliesalsotofirstuseafterdeliverysincethediamondknivesaredeliveredunsterilized(cleaninganddisinfectingafterremovalofthetrans-portprotectivepackaging;sterilizationafterpacking).Effectivecleaninganddisinfectingisanessentialprerequisiteforeffectivesterilization.Please always observe as part of your responsibility for the sterility of the diamond knives for the application that only adequate deviceandproduct-specificvalidatedprocessesforthecleaning/disinfectingandsterilizationshouldbeused,thatthedevicesused (disinfector, steriliser) are serviced and checked regularly, and the validated parameters for each cycle are observed.Please also observe the valid legal provisions in your country as well as the hygiene regulations of the medical practice or hospital. This particularly applies for the different regulations concerning effective prion deactivation.Cutters and tips are very sensitive to mechanical touching which is why one should absolutely avoid any situation during manipu-lation, particularly during cleaning and during safe storage, in which the diamond knives touch each other or come into contact with other hard materials. The traditionally used sieve or the bowl for random mounting are not at all suitable as eye instruments. The ideal container must be made out of a metal-tolerant material and be subdivided in such a way that it does not touch the diamond knives and that it does impact the sensitive blades and tips.
Cleaning and disinfectingBasicsAn automated process (a disinfector) should be used wherever possible for cleaning and disinfecting. A manual process should only be used if an automated process is unavailable because of its significantly lower effectiveness and reproducibility1.1 Use of a manual cleaning and disinfecting process must be secured by means of an additional product and process-specific
validation, which is the responsibility of the user.
Perform pre-treatment in both cases.
Pre-treatment
Rough dirt and fouling must be removed from the diamond knives immediately after use (within a maximum of 2 hours).
Useflowingwatertodothisoracleaningagentsolution;thecleaningagentshouldbecompatiblewiththediamondknives(seechapter “Resistance of the material to various substances“; we recommend our cleaner “Rapid Cleaner“ type No. 9000, 9001 and 9002). Clean the diamond knives and the blades using a soft, lint-free, damp cloth or by using the Amidia cleaning sticks Type No. 9014. Clean diamond blades with the cloth or cleaning sticks in the direction of cutting against the tip. In cases of strong fouling, we recommend hanging the diamond knives on the Amidia instrument stands type 9010, 9011, 9012 or 9013 and dipping the kni-ves in Amidia Rapid Cleaner so as just to cover the fouling, to soften the dirt. The diamond knives should not be totally immersed since particles of dirt could get into the mechanism and negatively effect their function.You can also perform an additional disinfection to protect personnel; the disinfecting agent should be aldehyde-free(otherwise there will be fixing of blood spots), should have a checked effectiveness (e.g. a DG HM or FDA approval or CE mar-king), be suitable for disinfecting the diamond knives and be compatible with the diamond knives (see chapter “Resistance of the material to various substances“). Please note that this disinfection – after cleaning – can not replace the disinfection step to be performed.
Directions for use
Diamond cutting instruments for microsurgery
MSI Precision Specialty Instruments1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone 800-633-7283fax 800-699-2839
mail: [email protected]: www.msiprecision.com 27
Automatic cleaning/disinfecting (disinfector/RDG)The following should be observed when selecting the disinfector,– that the disinfector always has a checked effectiveness (e.g. DG HM or FDA approval or a CE marking according to
DIN EN ISO 15883),– that wherever possible a checked programme for thermal disinfection (min. of 10 minutes at 93°C or an A0 value > 3000) is
used (for chemical disinfection a risk of disinfectant residues on the diamond knives),– thattheprogrammeusedforthediamondknivesissuitableandcontainsanadequatenumberofflushingcycles,– that only sterile or low germ content (a max. of 10 germs/ml) as well as a low endotoxine (max. of 0.25 endotoxine units/ml) of
water (e.g. purified water/highly purified water) is used for rinsing,– that the air used for drying is filtered and– that the disinfector is regularly serviced.
The following should be observed when selecting the cleaning agent system,– that this is fundamentally suitable for cleaning of instruments made out of metals and plastics,– that – in as far as no thermal disinfection is used – that an additional suitable disinfectant with a checked effectiveness
(e.g. a DG HM or FDA approval or a CE marking) is used and that this is compatible with the cleaning agent used and– that the chemicals used with the diamond knives are compatible (see chapter “Resistance of the material to various substan-
ces“).
The concentrations specified by the manufacturer of the cleaning agent and disinfectant, if needed, must be observed.
Procedure: 1. Lay the diamond knives in the disinfector. Ensure that the diamond knives do not touch each other. 2. Start the programme. 3. Remove the diamond knives after the disinfector programme has ended. 4. Check and pack away the diamond knives as soon as possible after removal (see chapter “Checking“, “Servicing“
and “Packing“, and also allow further drying if necessary at a clean location).
CheckingCheck the diamond knives after cleaning or cleaning/disinfecting for corrosion, damaged surfaces, splitting-off and fouling and separate out a damaged diamond knife (limit the number of times it is reused, see chapter “Reusability“). Diamond knives which are still dirty must again be cleaned and disinfected.
ServicingDo not use instrument oils wherever possible. If use is required, however, then one should ensure that only instrument oils (white oil)areusedwhichareapprovedforsteamsterilizationandhaveatestedbiocompatibility,whiletakingaccountofthemaximumsterilizationtemperatureused.
PackingPleasepackthediamondknivesindisposablesterilizationpackagings(simpleordoublepackaging)and/orsterilizationcontai-ners which meet the following requirements:– are in accordance with DIN EN 868/AN SI AA MI ISO 11607 DIN EN ISO/AN SI AA MI ISO 11607)– aresuitableforsteamsterilization(temperatureresistantuptoaminimumof141°C(286°F),adequatesteampermeability)– thereisadequateprotectionofthediamondknivesorsterilizationpackagingsagainstmechanicaldamage– regularlyservicedaccordingtothemanufacturer’sinstructions(sterilizationcontainer)
Diamond cutting instruments for microsurgery
28
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone 800-633-7283 fax 800-699-2839
mail: [email protected]: www.msiprecision.com
SterilizationOnlyusethefollowingsterilizationprocessesforthesterilization;othersterilizationprocessesarenotpermissible.Steamsterilization– a fractionated vacuum process2 (with adequate product drying)– a steam steriliser according to DIN EN 13060 or DIN EN 285– validated in accordance with DIN EN 554/AN SI AA MI ISO 11134 (valid order picking and product-specific performance
assessment)– Sterilizationtime(exposuretimeatthesterilizationtemperature)ofaminimumof20min.(at134°C(270°F))or5min3 at 134°C
(270°F)/134°C (273°F) 2 Use of the less effective gravitation process must be secured by additional product, steriliser and process specific validationwhichistheresponsibilityoftheuser(longersterilizationtimesmayberequired).
3 or 18 minutes (prion deactivation)
Alsodonotuseanyhotairsterilization,noradiationsterilization,NoformaldehydeorethyleNoxidesterilization,aswellasnoplasmasterilization.
StorageThediamondknivesmustbestoredinthesterilizationpackagingaftersterilization,dryanddust-free.
Resistance of the material to various substancesEnsure, when selecting cleaning agents and disinfectants, that they do not contain the following components:– organic,mineralandoxidisingacids(amaximumpermissiblepHvalueof10.5,aneutral/enzymaticorweakalkalinecleaneris
recommended)– strong sodium hydroxide solutions– organicsolvents(alcohols,ethers,ketones,benzines)– oxidation agent (e.g. hydrogen peroxide)– halogens (chlorine, iodine, bromine)– aromatic/alkyl halides– salts of heavy metals
Never clean the diamond knives by using metal brushes or steel wool.
The diamond knives may only be subjected to temperatures below 141°C (286°F)!
ReusabilityThe diamond knives can always be reused if they are handled with sufficient care and are undamaged and clean. Diamond knives with a defective or broken off blade must be reground or replaced.All liability is excluded in cases of violation of these instructions.
Repair FacilityMSI Precision Specialty Instruments1220 Valley Forge Road, Bldg. 34Phoenixville, PA
Diamond cutting instruments for microsurgery
MSI Precision Specialty Instruments 1220 Valley Forge Rd. Bldg 34 Phoenixville, PA 19460
phone 800-633-7283fax 800-699-2839
mail: [email protected] web: www.msiprecision.com 29
Most of our diamond blades can be resharpened several times if they are not too badly damaged.
For each repair, the handle is totally dismantled, and all of the mechanical parts are cleaned, checked and replaced if necessary. Micrometer and step knives are recalibrated.
After grinding, the diamond blade is checked to the same standard as new knives.
We accept other knives for repair except the micrometer knives. However, we can not accept responsabi lity for the break-age of blades other than Amidia.
We always do our best in order to return your repairs as soon as possible. However, the lead time may be variable due to the many different kind of blade types we receive for resharpening.
Customer Service
______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Order Form (Please fill out completely)
Your Address
___________________________________
___________________________________
___________________________________Attention: Accounts Payable___________________________________
Contact Name _____________________________Phone ( ____ ) ___________________________PurchaseOrder Number ______________________________
Check if Same As Bill To Address
___________________________________
___________________________________
___________________________________
___________________________________
Authorization
Signature _________________________________
Method Desired For Shipment (Please Select Method)UPS (Ground) UPS Orange UPS Blue UPS Red
Send Order Request To: Fax Your Order to:MSI Precision Instruments 800-699-28391220 Valley Forge Road, Bld 34 / Phoenixville PA 19460800-322-4674 / 800-633-7283
BILLTO
Qty. Product Number Page No. Description of Product Internal Use Only
SHIPTO
msi.orderform.0405
______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Instrument Repair Form (Please fill out completely)
Your Address
___________________________________
___________________________________
___________________________________Attention: Accounts Payable___________________________________
Contact Name _____________________________Phone ( ____ ) ___________________________PurchaseOrder Number ______________________________
Check if Same As Bill To Address
___________________________________
___________________________________
___________________________________
___________________________________
Repair AuthorizationSignature _________________________________
Please call before repairs are started.
Method Desired For Return / Shipment (Please Select Method)UPS (Ground) UPS Orange UPS Blue UPS Red
Send Repairs To: Fax Your Order to:MSI Precision Instruments 610-935-584427 Maple Avenue / Holbrook, MA 02343If you have questions call (610) 935-8181
BILLTO
Qty. Product Number Description of Problem Internal Use Only
SHIPTO
msi.repairform.0405
MSI Precision Specialty Instruments 1220 Valley Forge Road, Building 34
Phoenixville, PA 19460-2628
Phone: 1-800-633-7283 • 1-800-322-4674 • Fax: 1-800-699-2839
TERMS OF SALE• This price list supersedes all price lists.• All prices are F.O.B. Phoenixville, Pennsylvania, subjectto change without notice.• Our terms are Net 30 days to approved accounts.• List prices are subject to change.• All MSI Precision instruments are guaranteed to be freeof defects in materials and workmanship. Any instrumentwhich proves defective in workmanship or material will berepaired or replaced at our discretion with out charge. Thisguarantee is void for instruments serviced by any companyother than MSI Precision instrument repair service.• All MSI Precision instruments are carefully inspectedbefore shipment. Any claims must be made within (2) twodays of receipt of shipment. Most orders are shipped thesame day and, at the latest, by UPS within 72 hours.
RETURN POLICY• With our prior written authorization, returns may bemade within 30 days of purchase for full credit.Instruments must be unused and in their original package.• To insure proper credit, you must request our “ReturnAuthorization Form” and return the completed to us. Arestocking and inspection charge of 20% will be chargedon all authorized returns more than (30) thirty days afterour invoice date. No returns will be accepted after 90days. A restocking charge may be assess on any returnthat in our determination was not an error of MSI.• A restocking and inspection charge of 35% will becharged for on all authorized returns more than (60) sixtydays after our invoice date.• Goods accepted for return will be on a merchandisecredit basis only and we can only accept prepaid ship-ments.• Any merchandise returned without approval will be sub-ject to an automatic restocking fee with a minimum of35%.
PROCEDURE1. Notify our Customer Service Department in writing orby phone of your request for return authorization.2. We will mail a “Return Authorization Request” form.Please complete the form with the following information:
(A) Our stock number(B) Invoice Number(C) Date of invoice(D) Reason for return
3. When your form has been approved, we will issue youan authorization to return and a label.4. The following types of goods are not eligible for credit:
(A) Custom designed instruments(B) Instruments which have been used,
marked or altered in anyway(C) Engraved instruments(D) Discontinued products(E) Sterile products(F) Color coated instruments
Prices subject to change without notice.MSI Precision is not accountable for any errors or omissions that may appear in the catalog.
msi.060106msi.0612
Corporate:MSI Precision Specialty Instruments
1220 Valley Forge Road, Bldg. 34
Phoenixville, PA 19460
Repair Center:MSI Precision Specialty Instruments
27 Maple Avenue
Holbrook, MA 02343
Phone: 800.322.4674 • 800.633.7283 • 610.935.8181
Fax: 800.699.2839 • 610.935.5844