Click here to load reader

MRX Designer User Guide · PDF file Place all components. 2. Select all components, and execute [Unbundle Wires]. 3. Make one connection between components, and select the wire. 4

  • View
    1

  • Download
    0

Embed Size (px)

Text of MRX Designer User Guide · PDF file Place all components. 2. Select all components, and...

  • MRX Designer User Guide1

    MRX Designer User Guide

    This user guide explains “MRX Designer,” which is part of the “MTX-MRX Editor” Windows application and which allows you to make settings for the MRX7-D (subsequently referred to as the MRX). For an explanation of MTX-MRX Editor topics that are not part of MRX Designer, refer to “MTX-MRX Editor User Guide.”

    In this user guide, < > indicates a key on the computer keyboard. indicates the Shift key.

    Please note these important points ● All copyrights for this software and user guide are the property of Yamaha Corporation. ● Unauthorized copying or modification of this software or user guide in part or in whole is

    prohibited. ● Be aware that all screen graphics included in this user guide are for the purpose of explaining

    operations, and may differ from the actual screens. ● This software was not produced with the intension of being operated in Windows 10 using a

    touch panel, so we do not guarantee that it can be operated using a touch panel. ● Dante and Dante Controller are registered trademarks of the Audinate Corporation. ● Windows is a registered trademark of Microsoft Corporation USA in the United States and in

    other countries. ● iPad is a trademark of Apple Inc. registered in the United States and in other countries. ● Other company names and product names appearing in this document are the trademarks and

    registered trademarks of their respective owners. ● Software may be updated without notice for improvement.

  • Contents

    An overview of MRX Designer ............................................................6

    Screen structure..................................................................................7

    Basic use of MRX Designer..................................................................9

    Menu bar...........................................................................................12

    Tool buttons .....................................................................................17

    Shortcut keys ....................................................................................18

    Design sheet......................................................................................20

    ❏ Placing components.....................................................................................20

    ❏ Selecting multiple components, ports, or wires .........................................21

    ❏ Connecting ports .........................................................................................23

    ❏ Tracing the signal path ................................................................................24

    ❏ Duplicating an input port name ..................................................................25

    ❏ About [Unbundle Wires] ..............................................................................26

    ❏ YDIF handling...............................................................................................27

    ❏ Duplicating components..............................................................................28

    “Parameter Sets” area ......................................................................29

    ❏ “Preset” dialog box......................................................................................32 “New Snapshot Group” dialog box..........................................................................36

    “Parameter Link Group” area...........................................................37

    ❏ Link Master editor ........................................................................................38

    “Gang Edit Group” area....................................................................39

    “Properties” area ..............................................................................41

    MRX Designer User Guide2

  • Contents

    Components and the component editor ..........................................43

    ❏ Editing the parameters ................................................................................44 Knobs........................................................................................................................44 Sliders .......................................................................................................................44 Buttons .....................................................................................................................44

    ❏ Acoustic Echo Canceller (AEC) .....................................................................46

    ❏ Ambient Noise Compensator (ANC) ...........................................................48 “Ambient Noise Compensator” editor....................................................................49

    ❏ Audio Detector .............................................................................................51 “Audio Detector” editor ..........................................................................................51

    ❏ Auto Gain Controller (AGC).........................................................................52 “Auto Gain Controller” editor ................................................................................52

    ❏ Combiner......................................................................................................54 “Room Combiner” editor / “Room Combiner plus Automixer” editor ................57 Combiner parameter setting window (Room Combiner) ......................................58 Combiner parameter setting window (Room Combiner plus Automixer) ...........59 Dugan Automixer window (Room Combiner plus Automixer) ............................60

    ❏ Delay.............................................................................................................61 “Delay” component editor.......................................................................................61

    ❏ Dynamics ......................................................................................................62 “Compressor” component editor ............................................................................62 “Ducker” component editor ....................................................................................64 “Gate” component editor.........................................................................................66 “Limiter” component editor....................................................................................68 “Paging Ducker” component editor........................................................................70

    ❏ Effect.............................................................................................................72 “Effect” component editor.......................................................................................72

    ❏ EQ .................................................................................................................73 “GEQ” component editor ........................................................................................73 “PEQ” component editor.........................................................................................75

    ❏ Fader.............................................................................................................77 “Fader” component editor.......................................................................................77

    ❏ Feedback Suppressor ...................................................................................78 “Notch FBS” component editor...............................................................................78 Performing FBS detection for the FIXED type .......................................................79 “Pitch Shift FBS” component editor .......................................................................80

    ❏ Filter..............................................................................................................81 “BPF” component editor .........................................................................................82 “HPF” component editor.........................................................................................83 “LPF” component editor..........................................................................................84

    ❏ Inputs/Outputs.............................................................................................85 “ANALOG IN” editor ..............................................................................................85

    MRX Designer User Guide3

  • Contents

    “STEREO IN” editor ................................................................................................86 “YDIF IN” editor .....................................................................................................86 “SLOT IN” editor .....................................................................................................87 “ANALOG OUT” editor ..........................................................................................87 “DANTE OUT” editor .............................................................................................88 “SLOT OUT” editor .................................................................................................89

    ❏ Meter ............................................................................................................90 “Meter” component editor .............

Search related