Upload
michael-grove
View
224
Download
0
Embed Size (px)
Citation preview
8/6/2019 MRS SellSheet Links
http://slidepdf.com/reader/full/mrs-sellsheet-links 1/2
Ensure your signs are MUTCD compliant withMinimum Retrorefectivity Compliance Kits.
Each Kit includEs:
calibration sign standard
Calibration Sign standards in all required colors with retroreectivity levels engineered to
match the values specifed in MUTCD Table 2A-3. For use by your maintenance personnel
to easily calibrate their vision prior to conducting nighttime sign inspections. As they conduct
the inspection, they mark signs as pass / ail / marginal on their inspection log. I they
encounter a marginal sign, they move on to the Comparison Panel Standards procedure
or urther review to reach a pass / ail conclusion.
comparion Panel standardSmaller panels in all required colors with retroreectivity levels engineered to match the values
specifed in MUTCD Table 2A-3. Easy to use during nighttime inspections, these panels
replace the need to invest in costly portable reectometers and their respective maintenance.
Simply clip the comparison panels to the sign being evaluated and view rom a distance o
approximately 25 eet with the provided light source.
I the sign is brighter than the comparison panel, the sign exceeds the MUTCD minimum
values and may be kept in service. I the comparison panel is brighter, it indicates the sign
should be scheduled or replacement.
Use o the visual assessment method using these kits is simple,
eective, and ully compliant with FHWA recommendations or sign
evaluation. These kits oer the most cost eective way or an agency
to comply with the new MUTCD regulation on sign retrorefectivity.
Retrorefective values or both the Calibration Sign Standards andComparison Panel Standards are certifed by Avery Dennison.
US Patents Pending.
Conspicuity Tape Solutions
Your graphics partner or your feet,rail and transit needs.
Graphics and RefectiveSolutions
Inspired Brands.Intelligent World.TM
Minimum Retroreectivity Compliance KitOnly rom Avery Dennison
8/6/2019 MRS SellSheet Links
http://slidepdf.com/reader/full/mrs-sellsheet-links 2/2
For inormation on warranty terms, exclusions and certain limitations that apply please see our website: refectives.averydennison.com
All statements, technical inormation and recommendations about Avery Dennison products are based upon tests and inormation believedto be reliable but do not constitute a guarantee or warranty o any kind. All Avery Dennison products are sold with the understanding thatPurchaser has independently determined the suitability o such products or its intended and other purposes.
Graphics and RefectiveSolutions
© 2011 The Avery Dennison Corporation. All rights reserved
nor amer
250 Chester Street, Bldg. 7
Painesville, OH 44077
www.relectives.averydennison.com
FHWA Approved Assessment Method
The FHWA has developed several dierent approved methods or measuring and
maintaining minimum retroreectivity levels on trafc signage. O these methods,
the Calibration Signs Procedure and Comparison Panels Procedure are two o the
simplest and most efcient ways to properly manage your sign assets without incurring
unnecessary costs. Until now, commercially available calibration signs and panels
have not been available to properly carry out this test method. Through extensive
development work, Avery Dennison has produced calibration signs and panels thatsuccessully serve as tools to enable any agency to achieve compliance by ollowing
the FHWA’s procedures.
For more inormation on the New Minimum Reectivity Standards and assessment
methods, visit saety.hwa.dot.gov/roadway_dept/night_visib/retrotoolkit/ . There you
will fnd a wealth o inormation that will assist you in assuring that your trafc sign
inventories are in compliance with the new National Standards.
Other helpul links:
Manual on Uniorm Trafc Control Devices (MUTCD) - 2009 edition
http://mutcd.hwa.dot.gov/kno_2009.htm
Sign Retroreectivity Toolkit
http://saety.hwa.dot.gov/roadway_dept/night_visib/retrotoolkit/ Nighttime Visibility Policy / Guidance
http://saety.hwa.dot.gov/roadway_dept/night_visib/policy_guide/
Basics o Sign Retroreectivity & New Sign Maintenance Requirements
http://saety.hwa.dot.gov/roadway_dept/night_visib/sign_visib/pps_signinsp0708/
Methods or Maintaining Trafc Sign Retroreectivity, November 2007, pub. No.FHWA-HRT-08-02
http://saety.hwa.dot.gov/roadway_dept/night_visib/policy_guide/hwahrt08026/
Maintaining Trafc Sign Retroreectivity: Impacts on State and Local Agencies
http://www.hwa.dot.gov/publications/research/saety/07042/
Meet New National Standards with
Avery Dennison Retrorefective Sheeting
Bringing your trafc sign assets up to new national standards is easy with Avery Dennison’s ull range o retroreective sheeting products. All o our
sheeting products are omni-directional, which assures consistent, high levels o retroreectivity rom any angle. Whether your signs require basic,
engineer grade sheeting or ull cube prismatic sheeting or maximum saety perormance, Avery Dennison has the best option or your application.