Upload
power-brake
View
233
Download
7
Tags:
Embed Size (px)
DESCRIPTION
Custom Gaskets, American Motors, Buick, Chevrolet, Chrysler, Ford, Honda, Mitsubishi, Nissan, Oldsmobile, Pontiac, Toyota, Air Cleaner Base, Carburetor Fuel Bowl/Metering Block, Carburetor Fuel Bowl Screw, Carburetor Base, Carburetor Base Vibration Isolator, Supercharger Base & Front Cover, Header Gasket/Fastener Kits, Header Collector & Header Muffler, Automatic Transmission Oil Pan, Manual 4-Speed Transmission, Axle Housing, Differential Rear End, Gasket Material, RTV Silicone Sealer, Gasket Installation Tips, FASTENERS, Fastener Technical Information Tips, Cylinder Head Bolts, Cylinder Head Bolt Washers, Cylinder Head Dowel Pins, Rocker Arm Nuts, Rocker Arm Studs, Rocker Arm, Clips-Oil Deflecting, Rocker Stud Pin Kit, Cam Bolts/Lock Plate Kit, Crankshaft Pulley Bolts, Harmonic Balancer Bolts, Intake Manifold Bolts, Carburetor Studs, Distributor Clamp-Competition, Header Bolts, Header Bolt Lock Washers, Header Studs, Header To Muffler Bolts, Timing Cover Bolts & Studs,
Citation preview
Mr. Gasket is a trademark of Prestolite PerformanceCLEVELAND, OHIO 216-688-8300
www.mr-gasket.com©2010 Printed in U.S.A. 74513G
2011PERFORMANCE
GASKET & FASTENERCATALOG
THE HISTORY OF MR. GASKET 1964-2011
49
INDEXTHE HISTORY OF MR. GASKET 1964-2011 INDEX
www.mr-gasket.com www.mr-gasket.com
For over 45 years, the name Mr. Gasket has been synonymous with race-winning power and performance. To ensure that the Mr. Gasket brand remains dominant for many years to come, our team continues to drive with focus, a commitment to our core market and a keen sense of what the customer wants.
The history of the Mr. Gasket brand is a real American success story. Mr. Gasket was formed by Joseph F. Hrudka in 1964. Using his own 1957 Chevy drag race car as a test vehicle, he recognized the need and developed a plan to create a line of engine gaskets and fasteners proven to seal and withstand extreme engine temperatures, pressures and stresses created by high performance race engines used in the ever-growing sport of drag racing.
The Mr. Gasket products, proven over time on racing circuits and drag strips around the world, have earned legendary status in motorsports and an unparalleled reputation in the marketplace.The products are used by everyone from everyday drivers to grassroots enthusiasts to top name racers. The goal has always been to lead the market with innovative new products designed to push the power, speed, and performance of street and strip machines as quickly as automotive technology advances.
This legendary name in the industry, Mr. Gasket, offers much more than just gaskets. The Mr. Gasket brand also provides a variety of performance and racing products for all parts of your vehicle including: carburetor and fuel accessories, chrome-plated accessories, cooling system accessories, engine components, ignition and electrical accessories, shifter accessories, specialty tools, suspension and driveline components. Find out about all of the Mr. Gasket products and applications at www.Mr-Gasket.com.
1964 2011
PART PAGE4...................484A ................484C ................4815.................4216.................4217.................1518...........11, 1229...........11, 1230.................2134G ..............1547C ..............2648C ..............2648C ..............2649.................2649C ..............2650G ..............2651.................2652.................2654.................2654C ..............2654C ..............2655.................2655C ..............2655C ..............2656.................2656A ..............2656C ..............2656C ..............2657.................2657A ..............2657B ..............2657C ..............2658B ..............2658C ..............2658E ...............2658F ...............2659.................3760.................3761.................3762.................3763.................2965.................2975-701 .........4876.................2876C ..............2877.................3077A ..............3077B ..............3077C ..............3081.................2981A ..............2982.................2983G ..............2984.................2984A ..............2984B ..............2987.................3387A ..............3390...........11, 1290A ..............1591.................1793...........11, 1294.................15100.................9101.................9101B ..............9101G ..............9102G ..............9106.................9107...............13108...............13110...............13111.................9113.................9116.................9117...............13121...............13
PART PAGE122...............13125.................9126.................9128...............13135G ..............9136G ..............9138G ..............8139G ..............9142...............29143.................9145.................9146.................9148...............18149...............18150...............10150A ............10150B ............10150C ............10150D ............10152...............14152A ............14153...............14154...............14155...........8, 10168...............11175...............11177...............14179...............11181...............11182...............14183G ............11185...............11189...............11190...............11192...............14195...............14196...............11197...............14198...............11201G ............19202A ............19202G ............19203G ............18204G ............18205G ............19206G ............19207G ............19208A ............19208G ............19209G ............18210...............18211...............18213...............18214...............18215G ............18222...............18223...............18229...............19235...............19236...............19251...............20252...............20253...............19253A ............19254G ............20257G ............20258G ............19259A ............20259G ............20260.........18, 19263G ............19264G ............19274...............20275...............20276...............20278...............20290...............21
PART PAGE291...............20292...............21293...............20301...............16302...............16303G ............16306G ............16307G ............16311G ............16312...............16316...............16351...............16353...............16358...............16374...............17375G ............17378...............17379...............17380...............17382...............17384...............17394...............17397...............17404...............22405G ............22420...............13425...............13453...............23476...............23490...............23502G ............23503G ............23550A ............24550G ............24551...............24576...............24577...............14585G ............11586G ............14651G ..............7652G ..............7671G ............27672G ............27673G ............27674G ............27722G ............24738G ............11738G ............11738G ............11740.... 11, 12, 15740C ............11740C ............11740C ............11745...............17746...............21746C ............21748...............21757...............26758...............26770G ............27780G ............21780G ............21781G ............17790...............17792G ............21793G ............21794G ............21795G ............21800G ..............7806G ............34850.................7851.................7875.................7890.................7905...............43906...............43907...............43
PART PAGE908...............43910...............43911...............43912...............43913...............43914...............43915...............38915A ............38916...............38917...............38917A ............38918A ............38919G ............38920G ............34921G ............34922G ............34923G ............34924G ............34940G ............33941G ............33944G ............35944G ............35945G ............35946G ............35948G ............35949G ............35950G ............33953G ............33954G ............36955G ............36956G ............36957G ............36958G ............36976...............38978G ............38979G ............381015.............341052G ............81071.............341074.............341075.............341076.............341121G ..........151130G ............81131G ..........131132G ..........181134G ............81135G ..........151192.............281192C ..........281203.............281203C ..........281204.............281204C ..........281205.............281509.............251925.............471960.......11, 121961.......11, 121962.............121963.............211964.............211965.......21, 231968.............171969.............152091G ..........432092G ..........432093.............432094.............432210G ..........382211G ..........382492.............292501.............452505.............452506.............452507.............452508.............45
PART PAGE2842G ..........303030G ............83131G ............83132G ............83133G ............83140G ............83143G ............83144G ............83150G ..........133151G ..........133152G ..........133156G ..........133157G ..........133158G ..........133165G ..........183166G ..........183175G ..........183176G ..........183180G ..........183185G ..........223188G ..........223210G ..........153211G ..........153217G ..........153218G ..........153222G ..........153226G ..........153233G ..........153409.............383411.............383413.............393415.............393416.............393418.............393420G ..........383680.............443770G ..........473771G ..........473772G ..........473773G ..........473774.............473775G ..........473953.............124249G ..........264254G ..........264254G ..........264255G ..........264255G ..........264256G ..........264257G ..........264257G ..........264258G ..........264258G ..........264277G ..........264278G ..........264300G ..........444301G ..........444302G ..........444303G ..........444304.............444305.............444310G ..........444311.............444318.............444375.............334377.............334400.............124403.............124404.............154405.............154406.............124407.............124408.............124410.............214422.............244424.............174470.............42
PART PAGE4603G ..........294605G ..........294665G ............94666G ............94667G ............94668G ............94670G ..........134671G ..........134672G ..........134675G ..........134680G ..........184681G ..........184682G ..........184685G ..........194690G ..........164691G ..........164692G ..........164694G ..........224695G ..........224793G ..........114793G ..........114794G ..........154800G ..........104801G ..........104802G ..........104803G ..........104804G ..........104805G ..........104815G ..........144816G ..........144825G ..........194885G ..........284886G ..........284887G ..........284985.............464987.............464993.............464996.............464998.............464999.............465000.............455001.............455002.............455003.............455004.............455005.............455006.............455008.............465009.............465010.............465012.............465016.............465019.............455025.............465322G ..........355326.............415327.............415328.............415335.............405336.............405337.............405713G ............85714G ............85715G ............85716G ............85727G ............85780G ............85784G ..........155788G ..........225790G ..........185799G ............85800G ............85801G ............85802G ..........135804G ..........135805G ..........155807G ..........18
PART PAGE5808G ..........185809G ..........185810G ..........235812...............95813...............95814...............95817.............135818.............135819.............135820...............95821...............95822...............95823...............95824...............95827.............135828.............135831.............185832.............185834.............185835.............185836.............185837.............185838.............195839.............195840.............165841.............165844...............75848.............235851...............95853G ..........115854G ..........145855.............115857.............145859G ..........205860.............115861.............115862.............145863.............145864.............115866G ..........175867.............115869.............245870.............205871.............205872.............145875.............235876.............175877.............175880.............115881.............115882.............115883.............145884.............115885.............115889.............245890.............205891.............205892.............205895.............175900.............105901.............105902.............105903.............105904.............105905.............105906.............105907.............105908.............105910.............145911.............145912.............145913.............145914.............145916.............105917.............105919.............105920.............24
PART PAGE5921.............245927.............195928.............195929.............195930.............195931.............205932.............195935.............165936.............165937.............165938.............165939.............165944.............165945.............235947.............145949.............165950...............75951.............195952.............205953.............205954.............205958.............105959.............205960.............305961.............305964.............105965.............105966.............105967.............215969.............285970.............285971.............285972.............285980.............285981.............235983.............215985.............215986.............215988.............215989.............215990.............215991.............125992.............125994.............175995.............155996.............155997.............245998.............175999.............176058.............256080.............366081.............366082.............366085.............416086.............416087.............416088.............416089.............426090.............416091.............366093.............366100G ..........126177.............256178.............256179.............256183.............256185.............256186.............256197.............376199.... 11, 12, 156304.......40, 456305.............406310.............376311.............376312.............396313.............416315.............41
PART PAGE6316.............416317.............416318.............416324.............406329.............406330.............406345G ..........376346G ..........376352.............476352G ..........466353.............476399.............416452.............106460.............196481.............476482.............476483.............476560.............116561.............116663G ..........146664G ..........146665G ..........116683.............206684.............206710.............436711.............436712.............436715.............436716.............436717.............436718.............436719.............437007G ..........487100.............127101.............127102.............127103.............127104.............127106.............157108.............127110.............177112.............177115.............177118...............77120.............217121.............217123.............217124.............217125.............217127.............217129.............217130.............217140.............237141...............77142...............77145.............247146.............127147.............127148.............127149.............127150.............107151.............107152G ..........107153.............107154.............107157.............147158.............147160.............197161.............197164.............207165.............207166.............167167.............167170.............237171.............247174...............77176.............28
PART PAGE7176C ..........287177.............287177C ..........287178.............287178C ..........287215.............227216.............227225.............227230.............227235.......16, 227401G ..........107402G ..........107407G ..........147410G ..........197411G ..........197420G ..........287421G ..........287422G ..........287505.............107523.............247529...............77530...............77554.............207555.............207556.............197558.............197559.............197592.............167593.............167594.............167602G ..........297650G ..........277651G ..........277652G ..........277653G ..........277654G ..........277656G ..........277657G ..........277659G ..........277660G ..........277664G ..........277665G ..........277808.............307820.............337825.............427845.............357846.............357847.............358304.............258685G ..........298686G ..........298687G ..........298690.............298691.............298693.............298695.............298697.............299610.............309611.............309612.............309613.............309614.............309615.............309818.............409820.............409822.............409822.............409823.............4060030...........4872666G ........4874323G ........4874346G ........48D-2 ...............48M23957 ........48
TABLE OF CONTENTSTABLE OF CONTENTS
1www.mr-gasket.com
GASKETS & SEALS . . . . . . . . . . . 2-31
Gasket Categories . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Custom Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6American Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Buick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Chevrolet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15 Chrysler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17 Ford . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-21 Honda . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22Mitsubishi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22Nissan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22Oldsmobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-23 Pontiac . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-24 Toyota . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24Air Cleaner Base . . . . . . . . . . . . . . . . . . . . . . . . . . .25Carburetor Fuel Bowl/Metering Block . . . . . . . . . . .25Carburetor Fuel Bowl Screw . . . . . . . . . . . . . . . . . .25Carburetor Base . . . . . . . . . . . . . . . . . . . . . . . . . . .26Carburetor Base Vibration Isolator . . . . . . . . . . . . .26Supercharger Base & Front Cover . . . . . . . . . . . . . .27Header Gasket/Fastener Kits . . . . . . . . . . . . . . . . . .27Header Collector & Header Muffler . . . . . . . . . . . . .28Automatic Transmission Oil Pan . . . . . . . . . . . . . . .29Manual 4-Speed Transmission . . . . . . . . . . . . . . . .29Axle Housing Cover & Differential Rear End . . . . . . .29Gasket Material . . . . . . . . . . . . . . . . . . . . . . . . . . .30RTV Silicone Sealer . . . . . . . . . . . . . . . . . . . . . . . . .30Gasket Installation Tips . . . . . . . . . . . . . . . . . . . . . .31
FASTENERS . . . . . . . . . . . . . . . 32-46
Fastener Technical Information Tips . . . . . . . . . . . .32Cylinder Head Bolts . . . . . . . . . . . . . . . . . . . . . . . . .33Cylinder Head Bolt Washers . . . . . . . . . . . . . . . . . . .33Cylinder Head Dowel Pins . . . . . . . . . . . . . . . . . . . .33Rocker Arm Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . .34Rocker Arm Studs . . . . . . . . . . . . . . . . . . . . . . . . . .34Rocker Arm Clips-Oil Deflecting . . . . . . . . . . . . . . .34Rocker Stud Pin Kit . . . . . . . . . . . . . . . . . . . . . . . . .34Cam Bolts/Lock Plate Kit . . . . . . . . . . . . . . . . . . . . .35Crankshaft Pulley Bolts . . . . . . . . . . . . . . . . . . . . . .35Harmonic Balancer Bolts . . . . . . . . . . . . . . . . . . . . .35Intake Manifold Bolts . . . . . . . . . . . . . . . . . . . . . . . .36Carburetor Studs . . . . . . . . . . . . . . . . . . . . . . . . . . .37Distributor Clamp-Competition . . . . . . . . . . . . . . . .37Header Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Header Bolt Lock Washers . . . . . . . . . . . . . . . . . . . .39Header Studs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39Header To Muffler Bolts . . . . . . . . . . . . . . . . . . . . .39Timing Cover Bolts & Studs . . . . . . . . . . . . . . . . . . .40Valve Cover Bolts & Studs . . . . . . . . . . . . . . . . . . . .40Oil Pan Bolts & Studs . . . . . . . . . . . . . . . . . . . . . . . .41Air Cleaner Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . .41Air Cleaner Stud . . . . . . . . . . . . . . . . . . . . . . . . . . .41Automatic Transmission Oil Pan Bolts . . . . . . . . . .42Automatic Transmission Oil Pan Drain Plug . . . . . .42Oil Pan Drain Plug-Magnetic . . . . . . . . . . . . . . . . . .42Oil Pump Stud . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42Ring Gear Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43Flywheel Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43Torque Converter Bolts . . . . . . . . . . . . . . . . . . . . . .43Pressure Plate Bolts . . . . . . . . . . . . . . . . . . . . . . . . .43Lug Nuts-Open End . . . . . . . . . . . . . . . . . . . . . . . . .44Tire Screw Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44Wheel Studs-Competition . . . . . . . . . . . . . . . . . . . .44Drain Plugs-Manual Trans & Rear End . . . . . . . . . .44Chrome Plated Fasteners . . . . . . . . . . . . . . . . . .45, 46Pipe Plug Set . . . . . . . . . . . . . . . . . . . . . . . . . . .46, 47Fuel Line-Hose Mounting Clamps . . . . . . . . . . . . . .47Freeze Plug Kits-Brass . . . . . . . . . . . . . . . . . . . . . .47
PROMOTIONAL . . . . . . . . . . . . . . 48
NUMERICAL INDEX . . . . . . . . . . . 49
GASKETS
2
GASKETS
www.mr-gasket.com
CYLINDER HEAD GASKETSSteel Shim • Manufacturedfrom.020”steelshimstock. • ThinnerthanOEheadgaskets-increasesenginecompression. • Stressformedembossmentssealextremecylinderpressures. • Forhighperformancestreet,dragraceandovaltrackuse.
Ultra-Seal® • Fivelayer(graphitecore/perforatedsteelouterlayers) compositeconstruction. • Graphitecorehasexcellentthermo-conductivity-transfersheat awayfromhotspotsinheadpreventinggasketburn-out. • Providesexcellentstability,compressibilityandhigh temperatureendurance. • Coatedwithhightemperaturesiliconetoensuresealingofenginefluids. • Willnotbrinell(indent)aluminumcylinderheads. • Forhighperformancestreet,dragraceandovaltrackuse.
MLS (Multi-Layered Steel) • Manufacturedfromstainlesssteellayerswithapremium elastomercoating. • Stressformedembossmentssealextremecylinderpressures. • Providesexcellentstabilityandreducescylinderboredistortion. • Idealforsupercharged,turbo-charged,nitrousoxideandextreme compressionratios. • Forhighperformancestreet,dragraceandovaltrackuse.
PERFORMANCE ENGINE GASKETSWiththeever-increasingtechnologyinperformanceandracingenginedesigns-supercharged,turbo-charged,nitrousoxideandextremecompressionratios-ademandwascreatedforstronger,moredurableenginegaskets.Mr.Gasket,theoriginalHighPerformanceGasketmanufacturer,hasmetthechallengeanddevelopedperformancegasketsinavarietyofmaterialstomeetthesealingdemandsoftheseengines.Mr.Gasketenginegasketsaresomeofthemostadvanced,testedandprovenproductsintheperformancemarkettodayandhaveearnedtheconfidenceofbothprofessionalandsportsmanracers.
ENGINE OVERHAUL GASKET KITSStandard Engine Rebuild Overhaul Gasket Kits • Designedforstock,non-highperformanceenginerebuilds. • EngineeredtomeetorexceedOEgasketandsealspecifications. • Overhaulgasketkitsincludeallgasketsandsealstocomplete enginerebuild.
Ultra-Seal® Gasket Set • Designedformaximumsealingofbi-metal(castironblock/aluminum cylinderhead)engines. • Ultra-Sealcylinderhead,intake,exhaust,valvecoverandoil pangaskets. • Mr.Gaskettimingcover,fuelpump,thermostat,waterpump, andrearmainseals. • ForOEreplacement,highperformancestreet,dragraceandoval trackuse.
Premium Gasket Set • Designedformaximumsealingofbi-metal(castironblock/aluminum cylinderhead)engines. • Multi-LayeredSteel(MLS)cylinderheadgaskets. • Ultra-SealIIIintakemanifold,timingcover,waterpumpandfuel pumpgaskets. • Moldedrubberwithsteelcarriervalvecovergaskets. • RemainderofgasketsandsealsarehighqualityMr.Gasket. • ForOEreplacement,highperformancestreet,dragraceandovaltrackuse.
3
GASKETSGASKETS
www.mr-gasket.com
INTAKE GASKETSPerformance • Manufacturedfromcellulose/nitrilecompositiongasketmaterial. • Providesexcellentsealinganddurability. • Canbetrimmedifnecessaryformodifiedportapplications. • Completewithmanifoldendsealsanddistributorgasket. • ForOEreplacement,highperformancestreet,dragraceand ovaltrackuse.
Ultra-Seal® • Manufacturedfromcellulose/nitrilecompositiongasketmaterial. • Providesexcellentsealinganddurability. • Siliconebeadingonbothsidesofeachgasket. • Completewithmanifoldendsealsanddistributorgasket. • ForOEreplacement,highperformancestreet,dragraceand ovaltrackuse.
Ultra-Seal® III-The Next Generation • Manufacturedfromsynthetichigh-tensilestrengthand high-temperaturegasketmaterial. • Deliversexcellentsealingpropertiesforoil,fuelandcoolant. • Sealsusinglowflangepressure(clampforce),conformstoand sealsimperfectionsonsealingsurfaces. • Canbetrimmedifnecessaryformodifiedportapplications. • Releaseseasily(noscrappingrequired).Willnotsticktomating surfaceswhendisassemblingengine • ForOEreplacement,highperformancestreet,dragraceand ovaltrackuse.
OIL PAN GASKETSPerformance • Manufacturedfromhigh-densitycork/rubberblendgasketmaterial. • Providesexcellentsealinganddurability. • Completewithmoldedrubberfront/rearoilpanendseals whereapplicable. • ForOEreplacementandhighperformancestreetuse.
Ultra-Seal® • Manufacturedfromcellulose/nitrilecompositiongasketmaterial. • Providesexcellentsealinganddurability. • Completewithmoldedrubberfront/rearoilpanendseals whereapplicable. • ForOEreplacement,highperformancestreet,dragraceand ovaltrackuse.
Molded Rubber • Manufacturedfromhightemperaturesiliconeblendornitrile blendrubber. • Onepiecemoldedconstructionprovidesatightleakproofseal. • Torquelimiterspreventover-tighteningoffastenersand gasketsplitting. • Providesexcellentsealinganddurability. • ForOEreplacement,highperformancestreet,dragraceand ovaltrackuse.
GASKETS
4
GASKETS
www.mr-gasket.com
EXHAUST GASKETSPerformance • Manufacturedfromhigh-temperatureacrylicblendexhaustmaterial.
• Providesexcellentsealinganddurability.
• Canbetrimmedifnecessaryformodifiedportapplications.
• ForOEreplacement,highperformancestreet,dragraceand ovaltrackuse.
Ultra-Seal® • Manufacturedfromhigh-temperaturesteelcore/graphitefaced exhaustmaterial.
• Expandedsteelcoreprovidesstabilityandmaximumtorque retentiontoeliminategasketfailure.
• Graphitefacingprovidesexcellentheatresistanceandthermal conductivitytotransferheatawayfromthecylinderhead.
• Conformstoandsealsminorsurfaceirregularities.Highrecovery materialallowsheaderormanifoldflangetostaysealedifflange losesclamp-load.
• Canbetrimmedifnecessaryformodifiedportapplications.
• ForOEreplacement,highperformancestreet,dragraceand ovaltrackuse.
CopperSEAL • Manufacturedfrom“DeadSoft”(solid).043”thickcoppermaterial.
• .051”embossmentaroundeachexhaustporttosealirregular surfaces.Totalgasketthickness.094”.
• Providesexcellentsealinganddurability.
• Conformstoandsealsminorsurfaceirregularities.
• Forhighperformancestreet,dragrace,ovaltrackandturbo-charged (extremeheat)applications.
Aluminum Layered • Reusableheader,exhaustmanifoldandcollectorflangegaskets.
• Manufacturedfrom“DeadSoft”aluminumlayers–.125”thick.
• Conformseasilytosurfaceirregularities(warpedflanges).
• Compressesdownto.060”tocreateatightleak-proofseal.
• Willnotshrink,deteriorate,orblowout–eliminatinggasketleaks.
• Forhighperformancestreet,dragraceandovaltrackuse.
MLS (Multi-Layered Steel) • Multi-LayeredSteel(MLS)exhaustandheadercollectorgaskets aredesignedforextremecylinderpressuresproducedbyhigh horsepower–highcompressionturbo-charged,superchargedand nitrousoxideinjectedengines.
• Manufacturedfromthreestainlesssteellayers,theyresistcorrosion, willnotburnthroughorpushoutandmaintainmaximumfastener torqueretention.
• Stressformedinnerandouterlayerembossmentsactlikesprings thatreboundunderexhaustflangeclampload,creatingforceto sealextremeexhaustpressures.
• Willnotdeterioratefromscrubbingactioncausedbydifferent expansionratesinaluminumandsteelmaterials.
PERFORMANCE NOTE: Mr. Gasket was the first manufacturer to incorporate slotted mounting bolt holes at the ends of each exhaust gasket. This allows the gasket to be installed without removing the header flange or exhaust manifold entirely from cylinder head, making installation faster and easier.
5
GASKETSGASKETS
www.mr-gasket.com
VALVE COVER GASKETSPerformance • Manufacturedfromhigh-densitycork/rubberblendgasketmaterial.
• Providesexcellentsealinganddurability.
• Availableinstandardorextrathicktoprovideadditionalrocker armtovalvecoverclearance.
• ForOEreplacement,highperformancestreet,dragraceandoval trackuse.
Steel Core • Manufacturedfromhigh-densitycork/rubberblendgasketmaterial laminatedtoasteelcore.
• Steelcoreconstructionpreventsthegasketfrombeingdrawn insideorpushedoutofvalvecoverathighrpm’s.
• Providesexcellentsealinganddurability.
• Forhighperformancestreet,dragraceandovaltrackuse.
Molded Rubber • Manufacturedfromhightemperaturesiliconeblendornitrile blendrubber.
• Providesexcellentsealinganddurability.
• Torquelimiterspreventover-tighteningoffastenersandgasket splitting.
• ForOEreplacement,highperformancestreet,dragraceandoval trackuse.
Ultra-Seal® • Manufacturedfromhigh-densitycork/rubberblendgasketmaterial.
• Ablacklatexrubbercoatingisappliedtotheoutsideofgasketto
helpsealminorflangeirregularitiesandeliminatethepossibilityof oilleakage.
• Createsapositivesealbycontrolledswellingofthegasketmaterial whenexposedtohotengineoil.
• Availableinstandardorextrathicktoprovideadditionalrocker armtovalvecoverclearance.
• ForOEreplacement,highperformancestreet,dragraceandoval trackuse.
GASKETS
6
GASKETS
www.mr-gasket.com
CUSTOM GASKET MANUFACTURINGForacustomgasketquote,contactyourMr.GasketSales
RepresentativeorcontactMr.Gasketdirectlyat(216)688-8300
andprovidethemwiththefollowinginformation:
• Gasketsample,drawingoractualparttodeterminedimensions.
• Applicationtodetermineappropriategasketmaterial.
• Annualusageandreleasequantities.
• Targetprice.
PERFORMANCE GASKET MATERIALSIdeal for Carburetor Base, Intake Manifold, Valve Cover, Oil Pan, Timing Cover, Water Pump and Water Outlet gaskets:
• Compositegraymaterialavailablein.031”,.047”,.062”,.093”and.125”thicknesses.Thisisalowdensitymaterial thatconformswelltoirregularflangesurfacesandhasverygoodcrushresistanceathighflangepressures.Intendedforsealingoils,waterandcoolantinapplications upto350degreesFahrenheit.
• Compositegraymaterialavailablein.031”,.047”,.062”,.093”and.125”thicknesses.Thisisahighdensity,multi-polymermaterialdevelopedforsteam,oil,andchemicalresistanceinhighperformanceandindustrialapplications.Perfectforsealingwithlowflangeload,has highcrushresistance,exceptionaltorqueretention propertiesandunrivaledresistancetoblowout.For applicationswithintermittentoperatingtemperatures upto650degreesFahrenheit.
Ideal for high temperature applications such as Exhaust Manifold, Header, Collector and EGR system gaskets:
• Heavydutywhitematerial,.062”thick,consistingofanacrylicbindersystemtoresisthightemperature.Thismaterialismadeforsealingexhaustapplications. Providesexcellentsealinganddurability.
• Compositegraymaterial,.062”thick,consistingofgraphite-coated,high-temperaturefacingchemicallyandmechanically fusedtoanexpandedsteelcore.Premiummaterialmadeforsealingapplicationsthatrequirehighstrength,thermalintegrityandanti-stick(easyrelease)performance.
NOTE: Most gasket materials in stock are branded with the Mr. Gasket logo.A wide selection of other gasket materials can be ordered for special applications.
7
GASKETSGASKETS
www.mr-gasket.com
AMERICAN MOTORS
BUICK
STANDARD OVERHAUL GASKET KITS350, 400, 430, 455 ENGINES
Engine Years Part No.350 1968-81 7141
400, 430, 455 1967-76 7142
STANDARD OVERHAUL GASKET KIT 343, 360, 390, 401 ENGINES
Engine Years Part No.343-401 1967-78 7118
VALVE COVER GASKETS290, 304, 343, 360, 390, 401 ENGINES
Engine Years Part No. Thickness Description - Material Type290-401 1966-79 875 3/16" High Density Cork-Rubber Blend
OIL PAN GASKETS290, 304, 343, 360, 390, 401 ENGINES
Engine Years Part No. Description - Material Type290-401 1966-79 890 High Density Cork-Rubber Blend
INTAKE GASKETS290, 304, 343, 360, 390, 401 ENGINES
Engine Years Part No. Port Size Thickness Description - Material Type
290-401 1966-79800G
1.14" X 2.22" .060"Rectangular Port - Performance (Side Gaskets Only -Valley Pan Not Included)
5844 Rectangular Port - Ultra-Seal (Side Gaskets Only -Valley Pan Not Included)
EXHAUST GASKETS290, 304, 343, 360, 390, 401 ENGINES
Engine Years Part No. Port Size Description - Material Type290, 343, 390 1966-69 850 1.18" X 1.75" Rectangular Port - Performance
304, 360, 390, 401 1970-79851
1.25" X 1.75"Dog Leg Port - Performance
5950 Dog Leg Port - Ultra-Seal7174 Dog Leg Port - CopperSeal
EXHAUST GASKETS – V6196, 225, 231 ENGINES
Engine Years Part No. Port Size Description - Material Type196, 225, 231 1967-76 652G 1.06" X 1.66" Rectangular Port - Performance
EXHAUST GASKETS – V8350, 400, 430, 455 ENGINES
Engine Years Part No. Port Size Description - Material Type350 1968-81 7529 1.37" X 1.53" Rectangular Port - Ultra-Seal
400, 430, 455 1967-76651G
1.24" X 1.86"Rectangular Port - Performance
7530 Rectangular Port - Ultra-Seal
GASKETS
8
GASKETS
www.mr-gasket.com
Standard head Lightweight head
CHEVROLET
SMALL BLOCK V8HEAD GASKETS262, 265, 267, 283, 302, 305, 307, 327, 350, 400, LS1, LS2, LS6 ENGINES
Engine Years Part No.Gasket Bore
Comp. Thickness Description
262, 265, 267, 305
1955-91 5780G 3.870" .028" Ultra-Seal - Graphite/Steel Construction, Elastomer Coated
283, 302, 307, 327, 350, 400
1955-91
3130G 4.060" .040" MLS (Multi-Layered Steel), Elastomer Coated
1130G 4.100" .020" Embossed Steel Shim, Elastomer Coated (Not For Use w/Lightweight Head)
3131G 4.125" .040" MLS (Multi-Layered Steel), Elastomer Coated1134G
4.130".028" Ultra-Seal - Graphite/Steel Construction, Elastomer Coated
5800G .038" Ultra-Seal - Graphite Core, Elastomer Coated5799G .055" Ultra-Seal - Graphite Core, Elastomer Coated
1052G 4.140" .020" Embossed Copper Shim, Elastomer Coated (Not For Use w/Lightweight Head)
3132G 4.165" .040" MLS (Multi-Layered Steel), Elastomer Coated5801G
4.190".038" Ultra-Seal - Graphite Core, Elastomer Coated (With Steam Holes)
5727G .042" Solicor - Solid Steel Core, Laminated Facing (With Steam Holes)
3133G 4.200" .040" MLS (Multi-Layered Steel), Elastomer Coated
LT1, LT4 1992-97
3140G 4.040".040”
MLS (Multi-Layered Steel), Elastomer Coated3141G
4.100"MLS (Multi-Layered Steel), Elastomer Coated
5715G .046" Ultra-Seal - Graphite Core, Elastomer Coated (Aluminum Head)
5716G 4.110" .026" Ultra-Seal - Graphite/Steel Construction, Elastomer Coated (Steel Head)
LS1, LS2, LS6
1997-08
5713G4.000"
.051"
Ultra-Seal - Graphite Core, Elastomer Coated (LS1 Left Side)
5714G Ultra-Seal - Graphite Core, Elastomer Coated (LS1 Right Side)
3143G 4.130" MLS (Multi-Layered Steel), Elastomer Coated3144G 4.160" MLS (Multi-Layered Steel), Elastomer Coated
V6 & I6INTAKE GASKETS194, 230, 250, 262, 292 ENGINES
Engine Years Part No. Port Size Thickness Description - Material Type
194, 230, 250, 292
1962-89 155 2.49" X 1.54" .068" Rectangular Port - Performance (Intake & Exhaust Gasket)
262 1992-06 138G 1.25" X 2.24" .125" Rectangular Port - OEM Replacement (Vortec 1996-06)
9
GASKETSGASKETS
www.mr-gasket.com
CHEVROLET (CONT)
SMALL BLOCK V8INTAKE GASKETS262, 265, 267, 283, 302, 305, 307, 327, 350, 400, LS1, LS6 ENGINES
Engine Years Part No. Port Size Thickness Description - Material Type265, 283 1955-67 100 1.20" x 1.87"
.060"
Rectangular Port - Performance (Includes Steel Heat Riser Block-off Plates)
262-400
1955-91
101B
1.25" X 2.00"
Rectangular Port - Performance (Includes Steel Heat Riser Block-off Plates)
5820 Rectangular Port - Ultra-Seal4665G Rectangular Port - Ultra-Seal III (Includes Steel Heat Riser Block-off Plates)
101 .120" Rectangular Port - Performance (Includes Steel Heat Riser Block-off Plates)
1985-91 5851 .060" Rectangular Port - Ultra-Seal (Includes TPI Upper and Throttle Body Gaskets)
1996-02 139G 1.30" X 2.26" .125" Rectangular Port - OEM Replacement (Vortec)
1985-91145 1.50"
.060"
Plenum Set - Performance (TPI Upper and Throttle Body Gaskets)
146 1.75" Plenum Set - Performance (TPI Upper and Throttle Body Gaskets)
1955-01
5821 1.25" X 2.13" Small Race Port - Ultra-Seal101G
1.31" X 2.10"Small Race Port - Performance (Includes Steel Heat Riser Block-off Plates)
4666G Small Race Port - Ultra-Seal III (Includes Steel Heat Riser Block-off Plates)
106 .120" Small Race Port - Performance102G
1.31" X 2.19".060"
Medium Race Port - Performance
5822 Medium Race Port - Ultra-Seal
4667G Medium Race Port - Ultra-Seal III (Includes Steel Heat Riser Block-off Plates)
116.120"
Medium Race Port - Performance5812 Medium Race Port - Ultra-Seal111
1.31" X 2.31" .060"
Large Race Port - Performance5823 Large Race Port - Ultra-Seal113
.120"Large Race Port - Performance
5813 Large Race Port - Ultra-Seal143 1.35" X 2.26"
.060"18 Degree - Performance
1251.38" X 2.25"
Brodix Aluminum - Performance126 .120" Brodix Aluminum - Performance
58241.38" X 2.38"
.060" Extra Large Race Port - Ultra-Seal5814 .120" Extra Large Race Port - Ultra-Seal
1992-97 135G 1.24" X 2.06" .060" LT1 - Performance 1996-02 136G 1.31" X 2.37" .120" Vortec Design Port - Performance ('97-'00)
LS1, LS6 1997-05 4668G 1.15" X 3.40" .060" Rectangular Port - Ultra-Seal III (Cathedral Shape Port)
GASKETS
10
GASKETS
www.mr-gasket.com
CHEVROLET (CONT)
V6 & I6EXHAUST GASKETS194, 230, 250, 262, 292 ENGINES
Engine Years Part No. Port Size Description - Material Type
194, 230, 250, 292 1962-89 155 1.38" X 1.70" Rectangular Port - Performance (Intake & Exhaust Gasket)
262 1985-95 5958 1.55" X 1.63" Rectangular Port - Ultra-Seal
SMALL BLOCK V8EXHAUST GASKETS262, 265, 267, 283, 302, 305, 307, 327, 350, 400, LS1, LS2, LS3, LS6, LS7 ENGINES
Engine Years Part No. Port Size Description - Material Type
262-400 1955-91
64521.25" X 1.30"
Rectangular Port - Performance5916 Rectangular Port - Ultra-Seal150B
1.50"
Round Port - Performance5907 Round Port - Ultra-Seal7150 Round Port - CopperSeal
4802G Round Port - MLS (Multi-Layered Steel)7505 Vortec L31 Round Port - Ultra-Seal150
1.63"
Round Port - Performance5902 Round Port - Ultra-Seal
7152G Round Port - CopperSeal7402G Round Port - Aluminum Multi-Layered4803G Round Port - MLS (Multi-Layered Steel)150C
1.45" X 1.48"
Medium Race Port - Performance5900 Medium Race Port - Ultra-Seal7151 Medium Race Port - CopperSeal
7401G Medium Race Port - Aluminum Multi-Layered4800G Medium Race Port - MLS (Multi-Layered Steel)150A
1.45" X 1.55"
Large Race Port - Performance5901 Large Race Port - Ultra-Seal7153 Large Race Port - CopperSeal
4801G Large Race Port - MLS (Multi-Layered Steel)150D 1.50" X 1.65" Extra Large Race Port - Performance5917 1.50" X 1.82" Blackjack, Cyclone Oval Shape Port - Ultra-Seal5904 1.93" Hooker / Stahl Combination Adapter Plate - Ultra-Seal5905 1.53" X 1.65" Hooker Reversion Plate (For 2 1/8" Headers) - Ultra-Seal5908 1.61" X 1.85" Hooker Combination Reversion Plate / Stock Port - Ultra-Seal5906 1.65" X 1.60" Brodix Spread Port - Ultra-Seal5919 2.05" 18 Degree, Adapter Plate Side - Ultra-Seal5903 1.55" X 1.71" "D" Shape Port - Ultra-Seal
LT1, LT4 1992-975965 1.52" X 1.51" "D" Shape Port - Ultra-Seal7154 1.50" X 1.50" "D" Shape Port - CopperSeal
4804G 1.40" X 1.40" "D" Shape Port - MLS (Multi-Layered Steel)
LS1, LS6 1997-075964
1.75"Round Port - Ultra-Seal
4805G Round Port - MLS (Multi-Layered Steel)LS2, LS3, LS7 2005-10 5966 1.92" Round Port - Ultra-Seal
11
GASKETSGASKETS
www.mr-gasket.com
CHEVROLET (CONT)
SMALL BLOCK V8VALVE COVER GASKETS262, 265, 267, 283, 302, 305, 307, 327, 350, 400, LS1, LS2, LS3, LS6, LS7 ENGINES
Engine Year Part No. Thickness Description - Material Type
262-400 1955-86
1753/16"
High Density Cork-Rubber Blend5860 Ultra-Seal (Rubber Coated High Density Cork-Rubber Blend)179
5/16"High Density Cork-Rubber Blend
5861 Ultra-Seal (Rubber Coated High Density Cork-Rubber Blend)585G
3/16"Molded Nitrile Rubber
5853G Molded Silicone Rubber With Steel Carrier5855 1/4" High Density Cork-Rubber Blend With Steel Core5864 5/16" High Density Cork-Rubber Blend - Notched for Jesel System
305, 350 1987-97168
3/16"High Density Cork-Rubber Blend
5867 Ultra-Seal (Rubber Coated High Density Cork-Rubber Blend)SB2 N/A 181
1/8"Composition Material
LS1, LS2, LS3, LS6, LS7
1999-10 183G Composition Material
SMALL BLOCK V8OIL PAN GASKETS262, 265, 267, 283, 302, 305, 307, 327, 350, 400, LS1, LS2, LS3, LS6 ENGINES
Engine Year Part No. Description - Material Type
262-400
1955-74190 High Density Cork-Rubber Blend196 Composition Material5880 Ultra-Seal - Composition Material
1955-79 5884 Ultra-Seal - Composition Material (Includes Both Thick and Thin Front Seals)
1975-79189 High Density Cork-Rubber Blend198 Composition Material5881 Ultra-Seal - Composition Material
1975-85 6560 Molded Rubber, 1-Piece Gasket (Fits Left Hand and Right Hand Dipsticks)
1980-85185 High Density Cork-Rubber Blend
5882 Ultra-Seal - Composition Material
1986-976561 Molded Rubber, 1-Piece Gasket With Steel Carrier & Torque Limiters5885 Ultra-Seal - Composition Material (Multi-Piece Oil Pan Gasket)
LS1, LS2, LS3, LS6 1997-10 6665G Molded Rubber, 1-Piece Gasket With Steel Carrier & Torque Limiters
V6REAR MAIN SEAL, TIMING COVER SET, TIMING COVER SEAL, WATER OUTLET, DISTRIBUTOR GASKET173, 200, 229, 262 ENGINE
Engine Years Rear Main Seal Timing Cover SetTiming
Cover Seal Water OutletDistributor
Gasket173 1980-93
18 6199 (10 Pieces)
200, 229 1978-841960 (Silicone)
1961 (Polyacrylic)
740 (Bulk - Each)
740C (Packaged - Each)
738G (Aluminum Carrier - Rubber Insert)
262 1986-95 29 (One-Piece Rubber)
90 (Cork/Rubber Material) 740 (Bulk - Each)
93 (Composition Material) 740C (Packaged - Each)
4793G (Ultra-Seal III Material) 738G (Aluminum Carrier - Rubber Insert)
GASKETS
12
GASKETS
www.mr-gasket.com
CHEVROLET (CONT)
SMALL BLOCK V8REAR MAIN SEAL, TIMING COVER SET, TIMING COVER SEAL, WATER OUTLET, DISTRIBUTOR GASKET262, 265, 267, 283, 302, 305, 307, 327, 350, 400 ENGINES
Engine Years Rear Main Seal Timing Cover SetTiming Cover
Seal Water OutletDistributor
Gasket
262-400 1959-85
Except 1955-58 1960 (Silicone)
1961 (Polyacrylic)
1962 (Silicone - For Use With Align Honed 400)
90 (Cork/Rubber Material)
93 (Composition Material)
4793G (Ultra-Seal III Material)
18
740 (Bulk - Each)
6199 (10 Pieces)
740C (Packaged - Each)
738G (Aluminum Carrier - Rubber Insert)
305, 350 Except LT1
1986-95 29 (One-Piece Rubber)
90 (Cork/Rubber Material)
93 (Composition Material)
4793G (Ultra-Seal III Material)
740 (Bulk - Each)
740C (Packaged - Each)
738G (Aluminum Carrier - Rubber Insert)
350 LT1 1992-97 29 (One-Piece Rubber)
SMALL BLOCK V8PERFORMANCE OVERHAUL GASKET KITS, VALVE GRIND KITS, CAM CHANGE KITS262, 267, 283, 302, 305, 307, 327, 350, 400 ENGINES
Engine YearsPremium
Overhaul KitUltra-Seal
Overhaul Kit Valve Grind Kit Cam Change Kit283, 302, 307, 327, 350 1959-74
6100G (Includes MLS Head Gaskets - 4.060" Bore)
5991 (Does Not Include Upper Plenum Set-Part #145, Includes Ultra-Seal Head
Gaskets - 4.130" Bore)
3953 4400262, 267, 305, 350 1975-79 4403
305, 350 (Includes Tuned Port Injection) 1980-85 4406
305, 350 (With Cross Fire Injection) 1982-84 4400
305, 350 (With Tuned Port Injection) 1986 4408 (Does Not Include Upper Plenum Set-Part #145)
305, 350 (With Fuel Injection) 1987-915992 (Does Not Include Upper Plenum Set-Part #145, Includes Ultra-Seal Head
Gaskets - 4.130" Bore)
4407 (Does Not Include Upper Plenum Set-Part #145)
400 1970-74 4400400 1975-79 4403
SMALL BLOCK V8STANDARD OVERHAUL GASKET KITS283, 302, 305, 307, 327, 350, 400 ENGINES
Engine Years Part No.
283-3501959-79 7100 (Except 305)
1959-74 7104 (Steel Shim Head Gaskets)
305
1987-93 71461986 7147
1980-85 71481976-79 7149
3501987-91 7103
1986 71021980-85 7101
400 1970-79 7108
13
GASKETSGASKETS
www.mr-gasket.com
CHEVROLET (CONT)
BIG BLOCK V8HEAD GASKETS396, 402, 427, 454, 502 ENGINES
Engine Years Part No. Gasket Bore Comp. Thickness Description
396-454 Gen. IV
1965-90
1131G 4.370" .020" Embossed Steel Shim, Elastomer Coated3150G 4.375" .040" MLS (Multi-Layered Steel), Elastomer Coated5802G 4.520" .038" Ultra-Seal - Graphite Core, Elastomer Coated3151G 4.540"
.040"MLS (Multi-Layered Steel), Elastomer Coated
3152G 4.630" MLS (Multi-Layered Steel), Elastomer Coated
454, 502 Gen. V, VI
1991-00
3156G 4.375" .040" MLS (Multi-Layered Steel), Elastomer Coated5804G 4.520" .038" Ultra-Seal - Graphite Core, Elastomer Coated3157G 4.540"
.040"MLS (Multi-Layered Steel), Elastomer Coated
3158G 4.630" MLS (Multi-Layered Steel), Elastomer Coated
BIG BLOCK V8INTAKE GASKETS396, 402, 427, 454 ENGINES
Engine Years Part No. Port Size Thickness Description - Material Type
396-454Gen. IV
1965-90
107
1.75" X 2.16".060"
Oval Port - Performance5827 Oval Port - Ultra-Seal
4670G Oval Port - Ultra-Seal III117 .120" Oval Port - Performance108
1.75" X 2.50".060"
Rectangular Port - Performance5828 Rectangular Port - Ultra-Seal
4671G Rectangular Port - Ultra-Seal III110
.120"Rectangular Port - Performance
5818 Rectangular Port - Ultra-Seal420 1.83" X 2.43"
.060"
Dart Big Chief - Performance425 1.84" X 2.80" Dart Big "M" - Performance121
1.85" X 2.55"
Rectangular Raised Port - Performance5817 Rectangular Raised Port - Ultra-Seal
4675G Rectangular Raised Port - Ultra-Seal III122
.120"Rectangular Raised Port - Performance
5819 Rectangular Raised Port - Ultra-Seal128 1.86" X 2.83" Rectangular Raised Port - Performance
454 Gen. V, VI
1991-95 4672G 1.75" X 2.00" .060" Oval Port - Ultra-Seal III
GASKETS
14
GASKETS
www.mr-gasket.com
CHEVROLET (CONT)
BIG BLOCK V8VALVE COVER GASKETS 396, 402, 427, 454 ENGINES
Engine Year Part No. Thickness Description - Material Type
396-454 1965-90
5856 1/4" High Density Cork-Rubber Blend With Steel Core177
3/16"
High Density Cork-Rubber Blend5862 Ultra-Seal (Rubber Coated High Density Cork-Rubber Blend)
586G Molded Nitrile Rubber With Steel Carrier5854G Molded Silicone Rubber With Steel Carrier
1825/16"
High Density Cork-Rubber Blend5863 Ultra-Seal (Rubber Coated High Density Cork-Rubber Blend)
577 1/16" Composition Material (Fits Dart Big Chief, Pontiac Super Duty and Brodix Big Duke Heads) (8 Bolt)
5872 1/4" High Density Cork-Rubber Blend With Steel Core (Fits Dart Big Chief, Pontiac Super Duty and Brodix Big Duke Heads) (8 Bolt)
BIG BLOCK V8OIL PAN GASKETS396, 402, 427, 454, 502 ENGINES
Engine Year Part No. Description - Material Type
396-454 Gen. IV
1965-90
192 High Density Cork-Rubber Blend197 Performance Composition Material195 Performance Composition Material (Mountain Motor - 9 Mounting Bolt Holes)
5883 Ultra-Seal - Composition Material6663G Molded Rubber, 1-Piece Gasket
454, 502 Gen. V, VI
1991-00 6664G Molded Rubber, 1-Piece Gasket
BIG BLOCK V8EXHAUST GASKETS396, 402, 427, 454, 502 ENGINES
Engine Years Part No. Port Size Description - Material Type
396-502
1965-00
153
1.85" X 1.90"
Rectangular Port - Performance5910 Rectangular Port - Ultra-Seal7158 Rectangular Port - CopperSeal
4816G Rectangular Port - MLS (Multi-Layered Steel)
1965-90
152
1.92"
Round Port - Performance5911 Round Port - Ultra-Seal7157 Round Port - CopperSeal
7407G Round Port - Aluminum Multi-Layered4815G Round Port - MLS (Multi-Layered Steel)
1542.09" X 2.09"
Square Port - Performance5913 Square Port - Ultra-Seal152A
2.15"Round Port - Performance
5912 Round Port - Ultra-SealGM Race
4.840" Bore CentersN/A 5914
2.40"Round Port - Ultra-Seal (4.840" Bore Centers W/Big Block Chev. Bolt Pattern)
GM Race 5.000" Bore Centers
N/A 5947 Round Port - Ultra-Seal (5.000" Bore Centers W/Big Block Chev. Bolt Pattern)
15
GASKETSGASKETS
www.mr-gasket.com
CHEVROLET (CONT)
CHRYSLER
BIG BLOCK V8REAR MAIN SEAL, TIMING COVER SET, TIMING COVER SEAL, WATER OUTLET, DISTRIBUTOR GASKET396, 402, 427, 454, 502 ENGINES
Engine Years Rear Main Seal Timing Cover SetTiming Cover
Seal Water OutletDistributor
Gasket
396-454 Gen. IV
1965-90 1969 (Two-Piece Rubber)
90A (Cork/Rubber Material)
94 (Composition Material)
4794G (Ultra-Seal III Material) 17
740 (Bulk - Each)
740C (Packaged - Each)
738G (Aluminum Carrier - Rubber Insert) 6199 (10 Pieces) 454, 502 Gen. V, VI
1991-00 34G (One-Piece Rubber)
BIG BLOCK V8OVERHAUL GASKET KITS, CAM CHANGE KITS396, 402, 427, 454 ENGINES
Engine Years Standard Overhaul Kit Ultra-Seal Overhaul Kit Cam Change Kit396-454Gen. IV
1965-90 7106 (1965-79)(Oval Port)
5996 (Oval Port) 4405 (Oval Port)
5995 (Rect. Port) 4404 (Rect. Port)
SMALL BLOCK V8HEAD GASKETS273, 318, 340, 360 ENGINES
Engine Years Part No. Gasket Bore Comp. Thickness Description
273-360 1967-89
3210G 4.060".040"
MLS (Multi-Layered Steel), Elastomer Coated3211G 4.125" MLS (Multi-Layered Steel), Elastomer Coated1121G
4.140".028" Ultra-Seal - Graphite/Steel Construction, Elastomer Coated
5805G .038" Ultra-Seal - Graphite Core, Elastomer Coated
BIG BLOCK V8HEAD GASKETS361, 383, 400, 413, 426, 440 ENGINES
Engine Years Part No. Gasket Bore Comp. Thickness Description
361-440 (Exc. Hemi)
1959-78
3217G 4.380" .040" MLS (Multi-Layered Steel), Elastomer Coated1135G 4.400" .020" Embossed Steel Shim, Elastomer Coated3218G 4.410" .040" MLS (Multi-Layered Steel), Elastomer Coated5784G 4.450" .038" Ultra-Seal - Graphite Core, Elastomer Coated
3233G 4.500"
.040"
MLS (Multi-Layered Steel), Elastomer Coated (Also Fits Mopar Perf. Block - P4876169)
426 Hemi 1966-713222G 4.340" MLS (Multi-Layered Steel), Elastomer Coated
3226G 4.435" MLS (Multi-Layered Steel), Elastomer Coated (Also Fits Mopar Perf. Blocks - P4529850, P5249804)
GASKETS
16
GASKETS
www.mr-gasket.com
CHRYSLER (CONT)
SMALL BLOCK V8INTAKE GASKETS273, 318, 340, 360 ENGINES
Engine Years Part No. Port Size Thickness Description - Material Type273, 318 (2 Bbl.) 1966-89 306G 1.05" X 2.07" .060" Rectangular Port - Performance
318 (4 Bbl.), 340, 360 1967-89307G
1.17" X 2.27" .060"Rectangular Port - Performance
5840 Rectangular Port - Ultra-Seal4690G Rectangular Port - Ultra-Seal III
W2 Heads 1968-89 316 1.43" X 2.05" .060" W2 Port - Performance
BIG BLOCK V8INTAKE GASKETS361, 383, 400, 413, 426, 440 ENGINES
Engine Years Part No. Port Size Thickness Description - Material Type
361-440 (Exc. Hemi)
1958-78 301
1.21" X 2.26" .060"Rectangular Port - Performance (Side Gaskets Only -Valley Pan Not Included)
5841 Rectangular Port - Ultra-Seal (Side Gaskets Only -Valley Pan Not Included)
4691G Rectangular Port - Ultra-Seal III (Side Gaskets Only -Valley Pan Not Included)
413, 426 Max Wedge
1962-64 302 1.40" X 2.72" .060" Max Wedge Port - Performance (Also Fits Indy 440 Heads)
426 Hemi 1966-71
303G1.85" X 2.01"
.060"Rectangular Port - Performance
4692G Rectangular Port - Ultra-Seal III311G .120" Rectangular Port - Performance312 2.37" X 2.42" .060" Ken Veney Head - Performance
SMALL BLOCK V8 & I4EXHAUST GASKETS122, 273, 318, 340, 345, 360 ENGINES
Engine Years Part No. Port Size Description - Material Type122 (2.0L) 1989-99 7235 2.11" X 1.35" Rectangular Port - CopperSeal
273, 318 (2 Bbl.) 1967-74353
1.00" X 1.64"Rectangular Port - Performance
5938 Rectangular Port - Ultra-Seal7166 Rectangular Port - CopperSeal
318 (4 Bbl.), 340, 360 1975-915949 1.25" X 1.68" Rectangular Port - Ultra-Seal358
1.30" X 1.80"Rectangular Port - Performance
5935 Rectangular Port - Ultra-SealW2 Heads 1968-89 5939 1.56" X 1.50" W2 Port - Ultra-Seal5.7L Hemi 2002-10 7594 1.45" X 1.47" Rectangular Port - Ultra-Seal
BIG BLOCK V8 & V10EXHAUST GASKETS361, 383, 392, 400, 413, 426, 440, 488 ENGINES
Engine Years Part No. Port Size Description - Material Type
361-440 (Exc. Hemi)
1959-78
3511.78" X 1.48"
Rectangular Port - Performance5936 Rectangular Port - Ultra-Seal7167 Rectangular Port - CopperSeal5944 1.71" X 2.08" Indy Cylinder Head - Ultra-Seal
392 Hemi 1957-58 7592 1.55" X 2.13" Rectangular Port - Ultra-Seal426 Hemi 1966-71 5937 1.85" X 1.89" Rectangular Port - Ultra-Seal
V10 1994-03 7593 1.36" X 1.47" Rectangular Port - Ultra-Seal
17
GASKETSGASKETS
www.mr-gasket.com
CHRYSLER (CONT)
SMALL BLOCK V8VALVE COVER GASKETS273, 318, 340, 360 ENGINES
Engine Year Part No. Thickness Description - Material Type
273-3601964-91
3793/16"
High Density Cork-Rubber Blend5876 Ultra-Seal (Rubber Coated High Density Cork-Rubber Blend)
1992-01 5866G Molded Silicone Rubber With Torque Limiters
BIG BLOCK V8VALVE COVER GASKETS361, 383, 392, 400, 413, 426, 440 ENGINES
Engine Year Part No. Thickness Description - Material Type
361-440 (Exc. Hemi)
1963-80378
3/16"High Density Cork-Rubber Blend
5877 Ultra-Seal (Rubber Coated High Density Cork-Rubber Blend)
440 Indy Head N/A 3821/16"
Composition Material392 Hemi 1957-58 375G Composition Material
426 Hemi1964-71
374 3/16" High Density Cork-Rubber Blend380 1/16" Composition Material
384 384 1/8" Composition Material With Steel Core
SMALL BLOCK V8OIL PAN GASKETS318, 340, 360 ENGINES
Engine Year Part No. Description - Material Type
318, 340 1970-91394 High Density Cork-Rubber Blend5895 Ultra-Seal - Composition Material
360 1971-90394 High Density Cork-Rubber Blend5895 Ultra-Seal - Composition Material
CHRYSLER BIG BLOCK V8OIL PAN GASKETS361, 383, 400, 413, 426, 440 ENGINES
Engine Year Part No. Description - Material Type361-440 1958-80 397 Performance Composition Material (2 Required With Windage Tray)
REAR MAIN SEAL, TIMING COVER SET, TIMING COVER SEAL, WATER OUTLET273, 318, 340, 360, 361, 383, 400, 413, 426, 440 ENGINES
Engine Years Rear Main Seal Timing Cover Set Timing Cover Seal Water Outlet273-360 1957-91 790 781G 745 (1957-74)
361-440 1958-80 1968 (Two-Piece Rubber) (1962-80)
91
OVERHAUL GASKET KITS, CAM CHANGE KITS273, 318, 340, 360, 361, 383, 400, 413, 426, 440 ENGINES
Engine Years Standard Overhaul Kit Ultra-Seal Overhaul Kit Cam Change Kit273, 318 1967-91 7110 (1967-81) 5998 (1975-91)
4424340, 360 1971-91 7112 (1971-81) 5999361-440 (Exc. Hemi) 1963-80 7115 5994
GASKETS
18
GASKETS
www.mr-gasket.com
FORD
SMALL BLOCK V8 & I4HEAD GASKETS140, 260, 289, 281, 302, 351W, 351C, 351M, 400 ENGINES
Engine Years Part No. Gasket Bore Comp. Thickness Description140 (2.3L SOHC) 1974-93 3180G 3.830" .040" MLS (Multi-Layered Steel), Elastomer Coated
260-351W 1962-97 3175G 4.030" .040" MLS (Multi-Layered Steel), Elastomer Coated3176G 4.100" .040" MLS (Multi-Layered Steel), Elastomer Coated5807G 4.100" .038" Ultra-Seal - Graphite Core, Elastomer Coated
302, 351W SVO N/A3165G Left Side
4.100" .040" MLS (Multi-Layered Steel), Elastomer Coated3166G Right Side
351C, 351M, 400 1970-79 5808G 4.100" .038" Ultra-Seal - Graphite Core, Elastomer Coated
BIG BLOCK V8HEAD GASKETS360, 390, 406, 427, 428, 428CJ, 429, 429CJ, 460 ENGINES
Engine Years Part No. Gasket Bore Comp. Thickness Description
390-428CJ 1961-71 5790G 4.400" .038" Ultra-Seal - Graphite Core, Elastomer Coated1132G 4.420" .020" Embossed Steel Shim, Elastomer Coated
429-460 1968-78 5809G 4.490" .038" Ultra-Seal - Graphite Core, Elastomer Coated
SMALL BLOCK V8 & I6INTAKE GASKETS240, 300, 260, 289, 300, 302, 351W, 351C, 351M, 400 ENGINES
Engine Years Part No. Port Size Thickness Description - Material Type240, 300 1965-87 260 1.55" X 1.78" Rectangular Port - Performance (Intake & Exhaust Gasket)
260-302 (Exc. Factory HP)
1962-76
203G
1.20" X 2.13".060"
Rectangular Port - Performance5831 Rectangular Port - Ultra-Seal
4680G Rectangular Port - Ultra-Seal III213 .120" Rectangular Port - Performance
260-302 (Factory HP)
351W 1962-76
2101.21" X 2.11" .060"
Rectangular Port - Performance
5832 Rectangular Port - Ultra-Seal
302, 351W (Exc. EFI)
1977-97 223
1.25" X 2.11" .060"Rectangular Port - Performance
5834 Rectangular Port - Ultra-Seal4681G Rectangular Port - Ultra-Seal III
302 EFI 1986-95
58351.25" X 2.11"
.060"
Rectangular Port - Ultra-Seal4682G Rectangular Port - Ultra-Seal III
148Plenum
Upper Runner Plenum Base to Stock Manifold149 Upper Runner Plenum Base to GT-40 Manifold
302, 351W SVO N/A 204G 1.56" X 2.06" .060" SVO Port - Performance302 BOSS 1969-71 209G 1.86" X 2.60" .060" Rectangular Port - Performance
351C (2 Bbl.) 1970-74211
1.62" X 2.28" .060"Rectangular Port - Performance
5837 Rectangular Port - Ultra-Seal
351C (4 Bbl.) 1970-74 214
1.83" X 2.66".060"
Rectangular Port - Performance5836 Rectangular Port - Ultra-Seal215G .120" Rectangular Port - Performance
351M, 400 1975-82 222 1.53" X 2.16" .060" Rectangular Port - Performance
19
GASKETSGASKETS
www.mr-gasket.com
FORD (CONT)
FORD FUEL INJECTION GASKETSTHROTTLE BODY KITS
Engine Years Part No. Throttle Body Size Kit Contents
302 1986-93235 65mm Includes: EGR Spacer To Manifold Gasket, Throttle Body To Spacer
Gasket, EGR Valve Gasket And Air Bypass Valve Gasket236 77mm
BIG BLOCK V8INTAKE GASKETS352, 360, 390, 406, 427, 428, 428CJ, 429, 429CJ, 460 ENGINES
Engine Years Part No. Port Size Thickness Description - Material Type
352-428CJ (Exc. 427 Med./High Riser, Tunnel Port)
1958-71206G 1.45" X 2.40"
.060" Rectangular Port - Performance201G 1.48" X 2.56"
427 Med. Riser
1962-82202A 1.40" X 2.20"
.060" Rectangular Port - Performance427 High Riser 202G 1.50" X 2.90"427 Tunnel Port 205G 2.31" X 2.20"
429, 460 1968-88 208G
2.00" X 2.26" .060"Rectangular Port - Performance
5838 Rectangular Port - Ultra-Seal4685G Rectangular Port - Ultra-Seal III
429, 460 SVO N/A 229 1.82" X 1.95" .120" SVO Port - Performance
429CJ 1970-71208A
2.23" X 2.60" .060"Rectangular Port - Performance
5839 Rectangular Port - Ultra-Seal429 Boss 1969-70 207G 2.48" .060" Round Port - Performance
SMALL BLOCK V8 & I6EXHAUST GASKETS240, 260, 281(4.6L), 289, 300, 302, 351W, 351C, 351M, 400 ENGINES
Engine Years Part No. Port Size Description - Material Type240, 300 1965-87 260 1.55" X 1.78" Rectangular Port - Performance (Intake & Exhaust Gasket)
281(4.6L) SOHC 1991-03 5927 1.63" Round Port - Ultra-Seal281(4.6L) DOHC 1991-03 7556 1.21" X 2.16" Rectangular Port - Ultra-Seal281(4.6L) SOHC
(3 Valve Engine) 2005-10 7559 1.80" X 1.68" Rectangular Port - Ultra-Seal
281(4.6L) DOHC (4 Valve Engine)
1998-04 7558 1.78" Round Port - Ultra-Seal
260, 289, 302 (Exc. Boss), 351W
1962-97
253A 1.42" Round Port - Performance6460 1.04" X 1.31" Rectangular Port - Performance253
1.12" X 1.48"
Small Race Port - Performance5930 Small Race Port - Ultra-Seal7160 Small Race Port - CopperSeal
7410G Small Race Port - Aluminum Multi-Layered4825G Small Race Port - MLS (Multi-Layered Steel)264G
1.25" X 1.75"
Oval Port - Performance5928 Oval Port - Ultra-Seal7161 Oval Port - CopperSeal
7411G Oval Port - Aluminum Multi-Layered302 (Exc. Boss) N/A 5929 1.30" X 1.40" W. P. Windsor Jr. / Dart Heads - Ultra-Seal
351C (2 Bbl.), 351M, 400 1970-74263G
1.58" X 1.96"Rectangular Port - Performance
5951 Rectangular Port - Ultra-Seal
302 Boss, 351C (4 Bbl.) 1969-74258G
1.90" X 2.20"Rectangular Port - Performance
5932 Rectangular Port - Ultra-Seal
GASKETS
20
GASKETS
www.mr-gasket.com
FORD (CONT)
SMALL BLOCK V8VALVE COVER GASKETS260, 289, 302, 351W, 351C, 351M, 400 ENGINES
Engine Years Part No. Thickness Description - Material Type
260-351W (Exc. 302 Boss)
1962-97276
3/16"High Density Cork-Rubber Blend
5870 Ultra-Seal (Rubber Coated High Density Cork-Rubber Blend)
5859G Molded Silicone Rubber With Steel Carrier
302 Boss, 351C, 351M, 400
1969-82 2743/16"
High Density Cork-Rubber Blend5871 5871 Ultra-Seal (Rubber Coated High Density Cork-Rubber Blend)
BIG BLOCK V8VALVE COVER GASKETS352, 360, 390, 406, 427, 428, 428CJ, 429, 429CJ, 460 ENGINES
Engine Years Part No. Thickness Description - Material Type352-428CJ 1958-77 275 3/16" High Density Cork-Rubber Blend429-460 1968-87 278 3/16" High Density Cork-Rubber Blend
SMALL BLOCK V8OIL PAN GASKETS260, 289, 281(4.6L), 302, 330(5.4L), 351W, 351C, 351M, 400 ENGINES
Engine Years Part No. Description - Material Type
260, 289, 302 1962-95291 High Density Cork-Rubber Blend
5890 Ultra-Seal - Composition Material6683 Molded Silicone Rubber With Steel Carrier & Torque Limiters
281(4.6L), 330(5.4L) 1991-2010 6684 Molded Rubber, 1-Piece Gasket With Steel Carrier & Torque Limiters351W 1969-93 5891 Ultra-Seal - Composition Material
351C, 351M, 4001970-82 293 High Density Cork-Rubber Blend
5892 5892 Ultra-Seal - Composition Material
BIG BLOCK V8EXHAUST GASKETS352, 360, 390, 406, 427, 428, 428CJ, 429, 429CJ, 429 BOSS, 460 ENGINES
Engine Years Part No. Port Size Description - Material Type
352-390 1958-65251
1.56" X 2.32"Rectangular Port / 8 Bolt Holes In Gasket - Performance
5952 Rectangular Port / 8 Bolt Holes In Gasket - Ultra-Seal7164 Rectangular Port / 8 Bolt Holes In Gasket - CopperSeal
390, 428 1966-71254G
1.38" X 2.12"Rectangular Port / 14 Bolt Holes In Gasket - Performance
7554 Rectangular Port / 14 Bolt Holes In Gasket - Ultra-Seal
406, 427 1962-68 252
1.38" X 2.05"Rectangular Port / 16 Bolt Holes In Gasket - Performance
5953 Rectangular Port / 16 Bolt Holes In Gasket - Ultra-Seal
428CJ 1969-70 257G
1.40" X 1.78"Rectangular Port / 16 Bolt Holes In Gasket - Performance
7555 Rectangular Port / 16 Bolt Holes In Gasket - Ultra-Seal
429, 460 1968-87259G
1.25" X 2.08"Rectangular Port - Performance
5954 Rectangular Port - Ultra-Seal7165 Rectangular Port - CopperSeal
429CJ 1969-70 259A 1.50" X 2.40" Rectangular Port - Performance429 Boss 1970 5931 1.90" X 2.20" Rectangular Port - Ultra-Seal460 SVO N/A 5959 1.85" X 1.91" SVO Port - Ultra-Seal
21
GASKETSGASKETS
www.mr-gasket.com
FORD (CONT)
BIG BLOCK V8OIL PAN GASKETS352, 360, 390, 406, 427, 428, 428CJ, 429, 429CJ, 460 ENGINES
Engine Years Part No. Description - Material Type352-428CJ 1958-77 290 High Density Cork-Rubber Blend429-460 1968-89 292 High Density Cork-Rubber Blend
SMALL BLOCK V8REAR MAIN SEAL, TIMING COVER SET, TIMING COVER SEAL, WATER OUTLET260, 289, 302, 351W, 351C, 351M, 400 ENGINES
Engine Years Rear Main Seal Timing Cover Set Timing Cover Seal Water Outlet
260-3021963-83 1963 (Two-Piece Rubber)
792G780G
746 (Bulk - Each) (1968-85) 746C (Packaged - Each) (1968-85)
1983-95 30 (One-Piece Rubber)
351W 1969-98351C, 351M, 400 1970-82 793G
BIG BLOCK V8REAR MAIN SEAL, TIMING COVER SET, TIMING COVER SEAL, WATER OUTLET352, 360, 390, 406, 427, 428, 428CJ, 429, 429CJ, 460 ENGINES
Engine Years Rear Main Seal Timing Cover Set Timing Cover Seal Water Outlet352-428CJ 1958-77 1964 (Two-Piece Rubber) 794G
780G (1968-85) 748 (Bulk Each) (2 1/2" I.D.)429-460 1968-90 1965 (Two-Piece Rubber) 795G (1968-85)
SMALL BLOCK V8OVERHAUL GASKET KITS, CAM CHANGE KITS260, 289, 302, 351W, 351C, 351M, 400 ENGINES
Engine Years Standard Overhaul Kit Ultra-Seal Overhaul Kit Cam Change Kit
260, 289, 302 (Exc. Boss) 1962-957120 (1962-82) 5983 (1962-76)
4410 (1962-76)7121 (1983-91) 5985 (1983-95)
351W1969-74 7123 59861975-82 7124 59871983-97 7125 (1983-91) 5988
351C (2 Bbl.), 351M, 400 1970-82 7127351C (4Bbl.) 1970-74 5989
BIG BLOCK V8OVERHAUL GASKET KITS, CAM CHANGE KITS360, 390, 406, 427, 428, 428, 429, 460 ENGINES
Engine Years Standard Overhaul Kit Ultra-Seal Overhaul Kit Cam Change Kit360-428 1961-77 7129429, 460
(Exc. CJ, SCJ, Boss)1968-85 7130 5990
GASKETS
22
GASKETS
www.mr-gasket.com
OLDSMOBILE
HONDA (INCLUDES ACURA)
HEAD GASKETS1.5L, 1.6L, 1.8L ENGINES
Engine Engine Designator Years Part No.Gasket Bore
Comp. Thickness Description
1.5L D15Z1 1991-95 3185G 75mm .76mm MLS (Multi-Layered Steel), Elastomer Coated
1.6L B16Z6 VTEC; D16Y5,7,8 VTEC 1992-00 3185G 75mm .76mm MLS (Multi-Layered Steel), Elastomer Coated
1.6L, 1.8L B16A,B; B17; B18C DOHC 1994-01 3188G 85mm .76mm MLS (Multi-Layered Steel), Elastomer Coated
EXHAUST GASKETS1.5L, 1.6L, 1.7L, 1.8L ENGINES
Engine Engine Designator Years Part No. Port Size Description - Material Type1.5L, 1.6L D15B7; D16Y5,7,8; D16Z6 1992-98 7225 1.86" X 1.40" Rectangular Port - CopperSeal
1.6L, 1.7L, 1.8LB16A1,2,3; B17A1; B18A,B1; B18C1,5
1992-01 7230 1.98" X 1.47" Rectangular Port - CopperSeal
MITSUBISHI (INCLUDES EAGLE, PLYMOUTH)
EXHAUST GASKETS2.0L ENGINES
Engine Engine Designator Years Part No. Port Size Description - Material Type2.0L 4G63, 4G63K, 4G63T 1989-99 7235 2.11" X 1.35" Rectangular Port - CopperSeal
NISSAN
EXHAUST GASKETS2.0L, 2.4L ENGINES
Engine Engine Designator Years Part No. Port Size Description - Material Type2.0L SR20DE 1991-99 7215 1.76" X 1.30" Rectangular Port - CopperSeal2.4L KA24DE 1991-01 7216 1.62" X 1.61" Rectangular Port - CopperSeal
HEAD GASKETS330, 350, 400, 425, 455 ENGINES
Engine Years Part No. Gasket Bore Comp. Thickness Description
330, 350, 400, 425, 455 1964-80 5788G 4.230" .038" Ultra-Seal - Graphite Core, Elastomer Coated
INTAKE GASKETS330, 350, 400, 403, 425, 455 ENGINES
Engine Years Part No. Port Size Thickness Description - Material Type
330, 350, 403 1964-80405G
1.38" X 2.03" .060"Rectangular Port - Performance (Valley Pan Not Included)
4694G Rectangular Port - Ultra-Seal III (Valley Pan Not Included)
400, 425, 455 1965-76404
1.41" X 2.49" .060"Rectangular Port - Performance (Valley Pan Not Included)
4695G Rectangular Port - Ultra-Seal III (Valley Pan Not Included)
23
GASKETSGASKETS
www.mr-gasket.com
OLDSMOBILE (CONT)
PONTIAC
VALVE COVER GASKETS330, 350, 400, 403, 425, 455 ENGINES
Engine Years Part No. Thickness Description - Material Type
330-455 1964-80476
3/16"High Density Cork-Rubber Blend
5875 Ultra-Seal (Rubber Coated High Density Cork-Rubber Blend)
OIL PAN GASKETS330, 350, 400, 403, 425, 455 ENGINES
Engine Years Part No. Description - Material Type330-455 1964-80 490 High Density Cork-Rubber Blend
REAR MAIN SEAL400, 425, 455 ENGINES
Engine Years Rear Main Seal400, 425, 455 1965-76 1965 (Two-Piece Rubber)
OVERHAUL GASKET KITS330, 350, 400, 425, 455 ENGINES
Engine YearsStandard
Overhaul KitUltra-Seal
Overhaul Kit330, 350, 400,
425, 4551964-76 7140
(Intake Gaskets Not Included)5981
(Valley Pan Not Included)
EXHAUST GASKETS330, 350, 400, 403, 425, 455 ENGINES
Engine Year Part No. Port Size Description - Material Type
330-455 1964-80 453
1.55" X 1.92"Rectangular Port - Performance
5945 Rectangular Port - Ultra-Seal7170 Rectangular Port - CopperSeal
HEAD GASKETS326, 350, 389, 400, 421, 428, 455 ENGINES
Engine Years Part No. Gasket Bore Comp. Thickness Description326-455 1963-79 5810G 4.250" .038" Ultra-Seal - Graphite Core, Elastomer Coated
INTAKE GASKETS326, 350, 389, 400, 421, 428, 455 ENGINES
Engine Years Part No. Port Size Thickness Description - Material Type
326-455 (Except Ram Air)
1963-79502G
1.14" X 2.06" .060"Rectangular Port - Performance
5848 Rectangular Port - Ultra-Seal400 Ram Air 1967-76 503G 1.18" X 2.20" .060" Rectangular Port - Performance
GASKETS
24
GASKETS
www.mr-gasket.com
PONTIAC (CONT)
VALVE COVER GASKETS326, 350, 389, 400, 421, 428, 455 ENGINES
Engine Years Part No. Thickness Description - Material Type
326-455 1961-79576
3/16"High Density Cork-Rubber Blend
5869 Ultra-Seal (Rubber Coated High Density Cork-Rubber Blend)
OIL PAN GASKETS326, 350, 389, 400, 421, 428, 455 ENGINES
Engine Years Part No. Description - Material Type326-455 1959-76 (w/3 Hole Rear Oil Pan Flange) 5889 Ultra-Seal - Composition Material
OVERHAUL GASKET KITS, CAM CHANGE KITS350, 400, 428, 455 ENGINES
Engine Years Standard Overhaul Kit Ultra-Seal Overhaul Kit Cam Change Kit
350-455 1967-76 7145 (Intake Valley Cover Gasket Not Included)
5997 (Intake Valley Cover Gasket Not Included)
4422
TOYOTA
EXHAUST GASKETS2.2L ENGINES
Engine Engine Designator Years Part No. Port Size Description - Material Type2.2L 20R 1975-80 722G 1.41" Round Port - Performance
EXHAUST GASKETS326, 350, 389, 400, 421, 428, 455 ENGINES
Engine Years Part No. Port Size Description - Material Type
326-455(Exc. Ram Air, H.O.
and Super Duty)1963-79
550A1.46" X 1.93"
Open Center Port - Performance5920 Open Center Port - Ultra-Seal550G
1.55" X 2.00""D" Shape Port - Performance
5921 "D" Shape Port - Ultra-Seal7171 "D" Shape Port - CopperSeal
400 Ram Air IV, 455 H.O. & Super Duty
1968-74551
1.88"Round Port - Performance
7523 Round Port - Ultra-Seal
25
GASKETSGASKETS
www.mr-gasket.com
AIR CLEANER BASE GASKET • Madefromdurable1/16”thickcellulose/nitrilecompositegasketmaterial
• Precisiondiecutforanexcellentsealandfit
Fits 4 & 2 Bbl. Air Cleaners w/5 1/8”, 4-7/32”, 3” & 2-5/8” Dia. Base ........ 6185 Holley Dominator Air Cleaner Gasket ........................................................ 6186
CARBURETOR FUEL BOWL AND METERING BLOCK GASKETS • ReplacementfuelbowlandmeteringblockgasketsforHolleycarburetors
• 6100seriesgasketsaremadefromrubbercoatedmaterialdesigned tominimizeswellingandcanbeusedwithracinggasolineoralcohol
• Gasketsareavailableinmatchedpairsorpackagedfiveperset
HOLLEY CARB. MODEL NUMBER DESCRIPTION QUANTITY PART NO.
2300, 4150, 4160 Fuel Bowl and 1 each
1509
Metering Block Gasket set per set
2300, 4150 Fuel Bowl 5 per set
6183
4160, 4500 Gaskets
4150
Fuel Bowl and 2-each 6177
Metering Block Gasket Set per set
4160
Fuel Bowl and 2-Fuel Bowl 6178
Metering Block Gasket Set 3-Metering Block
4500
Fuel Bowl and 2-each 6179
Metering Block Gasket Set per set
1509
1509
6177 - 6178
6178
6177 - 6178 - 6183
6185
6186
6058
FUEL BOWL WASHER KIT FOR HOLLEY CARBURETORS• Theseplasticwasherswillnottearlikepaperonesandcanbeused manytimes
• FitsHolleyfloatbowlscrewstoattachfuelbowlsandpreventfuelleaks
(10/kit)................................................................................................ 6058
FUEL BOWL SCREW GASKETS•Engineeredforalonglastingsealforstreetandstripapplications
•FitsHolley2300,4150,4160,4165,4175,4500seriescarbs
(24/kit)................................................................................................ 8304
8304
GASKETS
26
GASKETS
www.mr-gasket.com
CARBURETOR BASE GASKETS• Madefromdurable1/16”and1/4”thickcellulose/nitrilecompositegasketmaterial• Precisiondiecutforanexcellentsealandfit• Availablebulkorskinpackaged
CARBURETOR BASE GASKETS – ULTRA-SEAL® III• Madefromsynthetichigh-tensilestrengthandhigh-temperaturegasketmaterial• Deliversexcellentsealingpropertiesforoil,fuelandcoolant
• Sealsusinglowflangepressure(clampforce),conformstoandsealsimperfections onsealingsurfaces• Releaseseasily(noscrappingrequired)willnotsticktomatingsurfaces whendisassembling
CARBURETOR BASE VIBRATION ISOLATOR GASKETS • Madefrom1/4”thickclosedcellfoamrubbermaterial• Designedtostabilizefuelcurveincarburetorfuelbowls• Actsasashockabsorbertodampenfuelvibration,reducefuelfoamingandcutdown erraticneedle/seatmotion
Holley and Demon square flange 4 bbl. carburetors with open center intake manifold...........4277G Holley and Demon square flange 4 bbl. carburetors with 4-hole intake manifold...................4278G
49 51
52 54
5556
56A 57
57A 57B
58B 58C
58E
PERFORMANCE PERFORMANCE ULTRA-SEAL III PERFORMANCE BULK SKIN SKIN SKIN PACKAGED PACKAGED PACKAGED PACKAGEDAPPLICATIONS 1/16” THICK 1/16” THICK 1/16” THICK 1/4” THICKHOLLEY CARBURETORS 4 bbl. - Open Center 54 54C 4254G 757Fits 1-3/4” bore 850, 950, 1000 Cfm Carbs 4 bbl. - 4 Hole - 1-3/4” Bore 55 55C 4255G 758Fits Most Square Flange Carbs 4 bbl. - 4 Hole Or Open Center 48C Perforated Center Can Be Removed 4 bbl. - 4 Hole - 4500 Dominator 2” Bore 58B 4258G 4 bbl. - Open Center - 4500 Dominator 58C 4257G 4 bbl. - 4 Hole - 4500 Dominator 2.13” Bore 58F 4 bbl. - Open Center - Spread Bore 58E 2 bbl. - Open Center - 350/500 CFM 49 49C 4249G CARTER CARBURETORS 4 bbl. - 4 Hole - 1-1/2” Bore, 4GC/WCFB 50G 4 bbl. - Open Center - AFB, AVS 54 54C 4254G 4 bbl. - 4 Hole - 1-3/4” Bore 55 55C 4255G 4 bbl. - 4 Hole Or Open Center 48C Perforated Center Can Be Removed 4 bbl. - 4 Hole - 1-7/16” Bore 57 57C 4 bbl. - 4 Hole - Thermo Quad 57A 4 bbl. - Open Center - Thermo Quad 57B DEMON CARBURETORS 4 bbl. - Open Center - Race, Speed, Road 54 54C 4254G 7574 bbl. - 4 Hole - Race, Speed, Road 55 55C 4255G 4 bbl. - 4 Hole Or Open Center 48C Perforated Center Can Be Removed 4 bbl. - 4 Hole - King 58B 4258G 4 bbl. - Open Center - King 58C 4257G EDELBROCK PERFORMER CARB4 bbl. - Open Center - Square Flange Carbs 54 54C 4254G 757EDELBROCK Q-JET CARBS 4 bbl. - 4 Hole 56 56C 4256G 4 bbl. - Open Center 56A ROCHESTER CARBURETORS 4 bbl. - 4 Hole Or Open Center 47CPerforated Center Can Be Removed 4 bbl. - 4 Hole - Quadrajet 56 56C 4256G 4 bbl. - Open Center - Quadrajet 56A 2 bbl. - Open Center 51 Small Base 1-7/8” x 3-1/4” 2 bbl. - 2 Hole 52 Large Base 2” x 3-11/16”
27
GASKETSGASKETS
www.mr-gasket.com
673G
APPLICATIONS GASKETS
GMC 671,871basegasket-1/32”thick 671G 671,871basegasket-1/16”thick 674G 671,871injectorbasegasket-1/16”thick 672G 671,871injectorbasegasket
withscreen-1/16”thick 673G
770G
HEADER PART NO. APPLICATION YEARS CID LITERS FLANGE TYPE 7650G Chevrolet V-8 1955-91 265-400 4.3-6.6 Square Port
7651G Chevrolet V-8 1955-91 265-400 4.3-6.6 Round Port
7652G Chevrolet V-8 1955-91 265-400 4.3-6.6 Oval Port
7653G Chevrolet V-8 1965-99 396-454 6.5-7.4 Square Port
7654G Chevrolet V-8 1965-99 396-454 6.5-7.4 Round Port
7656G Chrysler V-8 1975-91 318 5.2 Rectangle Port
7656G Chrysler V-8 1968-91 340, 360 5.6-5.9 Rectangle Port
7657G Chrysler V-8 1959-78 383, 440 6.3-7.2 Rectangle Port
7659G Ford V-8 1965-95 289, 302, 351W 4.7-5.7 Rectangle Port
7660G Ford V-8 1986-95 302 5.0 Oval Port
7664G Oldsmobile V-8 1964-76 330-455 5.4-7.5 Rectangle Port
7665G Pontiac V-8 1964-79 326-455 5.3-7.5 D-Port Port Center
SUPERCHARGER GASKETS• Madefromdurable1/16”thickcellulose/nitrilecompositegasketmaterial
• Precisiondiecutforanexcellentsealandfit
674G
SUPERCHARGER FRONT COVER GASKET SET• FitsGMCandmostaftermarket71seriessuperchargers,except “V”styles
• Madefromdurable.047”thickcellulose/nitrilecompositegasketmaterial
• Includesfrontcover,drivehousingandblock-offplategaskets
Supercharger Front Cover Gasket Set......................................................770G
HEADER GASKET & FASTENER INSTALLATION KITS• Includesgasketsandfastenersnecessaryforheaderinstallation
• MadeusingpremiumUltra-Sealexhaustandcollectorgaskets
• Mr.Gasketheaderandcollectorboltsdelivernecessaryclamp-loadto sealflangematingsurfaces
7650G
GASKETS
28
GASKETS
www.mr-gasket.com
(37)Bulkeach,(38)Includesmountinghardware
TRIANGLE – 3 BOLT HOLES
COLLECTOR AND HEADER MUFFLER GASKETS• Collector/headermufflergasketsaredesignedtopreventleaksbetween headerandcollectorflanges
• Bulkgasketsaresoldindividually,packagedgasketsaresold2perset
SOLID EMBOSSED DIA. CIRCLE HOLE PERFORMANCE ULTRA-SEAL COPPERSEAL ALUMINUM STAINLESS STEEL
2-1/2” 3-1/2” 3/8”
76 (37), 7176(37),7420G
(38)4885G
76C
5980 7176C
2-3/4” 3-1/2” 3/8”
5970
3” 3-7/8” 3/8”
1204 (37), 5969(37), 7177(37), 7421G
(38)4886G
1204C 5971 7177C
3-1/2” 4-7/16” 3/8”
1203 (37), 7178(37), 1203C
5972 7178C
7422G (38)
4887G
SQUARE – 4 BOLT HOLES
HOLE BOLT BOLT DIA. CIRCLE HOLE PERFORMANCE
3” 4-1/16” 3/8” 1205 (37)
1205
1192
7177C5971
76C
7421G
ROUND – 3 AND 4 BOLT HOLES
HOLE BOLT BOLT DIA. CIRCLE HOLE PERFORMANCE
3-3/4” 2-7/8”
3 Bolts, 3/8”
1192(37), 4” 1192C 4 Bolts
(37)Bulkeach
(37)Bulkeach
29
GASKETSGASKETS
www.mr-gasket.com
86918690
86958685G
8686G 8687G
OVERHAUL GASKET KITS FOR4-SPEED TRANSMISSIONS• Thesegasketsletyouchecktransmissiongearsforwearwithout theextraexpenseofreplacementgaskets
• Precisiondiecutforanexcellentsealandfit
APPLICATIONS PART NO. Muncie 1963 thru mid 1974 with tailshaft seal 2492
AXLE HOUSING COVER & DIFFERENTIAL REAR END GASKETS• Performancegasketsaremadefromdurable.047”thickcellulose/nitrile compositegasketmaterial
• Precisiondiecutforanexcellentsealandfit
ULTRA-SEAL® III GASKETS• Deliversexcellentsealingpropertiesforoil,fuelandcoolant
• Sealsusinglowflangepressure(clampforce),conformstoandseals imperfectionsonsealingsurfaces
• Releaseseasily(noscrappingrequired)willnotsticktomatingsurfaces whendisassembling
83G
63 65
81 81A
82
84 84A
84B 1424605G
AUTOMATIC TRANSMISSION PAN GASKETS Transmission Part No. Description - Material Type GENERAL MOTORS Powerglide, Turbo 350, Turbo 400, 700-R4, 6L80E Transmissions Powerglide 8693 High Density Cork-Rubber Blend Turbo 350 8690 High Density Cork-Rubber Blend Turbo 400 8691 High Density Cork-Rubber Blend 700-R4 8695 High Density Cork-Rubber Blend 6L80E 8685G Molded Silicone Rubber With Steel Carrier CHRYSLER 727, W5A580 Transmissions 727 8697 High Density Cork-Rubber Blend W5A580 8687G Molded Silicone Rubber FORD 5R55S Transmissions 5R55S 8686G Molded Silicone Rubber With Steel Carrier
PERFORMANCE ULTRA-SEAL III APPLICATIONS PART NO. PART NO. Chevrolet, Camaro SS, 8.50” Ring Gear 2008-10 4605G Chevrolet 10 Bolt 7.50” Ring Gear 1977-02, Exc. Monza & Vega 63 Buick, Olds, Pontiac, Chevrolet 10 Bolt 8.20” Ring Gear 1965-81 84 Chevrolet 10 Bolt 8.50” Ring Gear 1970-81 84B Chevrolet & GM Truck 12 Bolt 1964-82 8.875” Ring Gear, Rear Differential 65 Chevrolet 12 Bolt 1965-72 8.875” Ring Gear, Passenger Car 84A 4602G Ford 10 Bolt 9” Ring Gear 1957-81 82 4603G Ford 10 Bolt 8.80” Ring Gear 1981-11 142 Chrysler 12 Bolt 8.75” Ring Gear 1961-74 81 Chrysler, Dodge/Plymouth, Ford, DANA 60 & 70 12 Bolt 9.75” Ring, Gear 1966-84 81A Dodge Truck 9.25” Ring Gear 1986-98 83G
GASKETS
30
GASKETS
www.mr-gasket.com
CORK GASKET MATERIAL• Thisgasketmaterialdeliversexcellentsealingpropertiesforoilapplications
• Usedtomakevalvecovergasketsandintakemanifoldendseals
• Packagedinapolybag
1/16” x 12” x 36” sheet......................................................................... 9612 1/8” x 12” x 36” sheet........................................................................... 9613
FIBER GASKET MATERIAL• Thisgasketmaterialdeliversexcellentsealingpropertiesforoilapplications
• Usedtomaketransmissionsidecovergaskets
• Packagedinapolybag
1/64” x 9” x 36” sheet........................................................................... 9610 1/32” x 9” x 36” sheet........................................................................... 9611
COMPRESSED GASKET MATERIAL• Thisgasketmaterialdeliversexcellentsealingpropertiesforoil,fueland coolantapplications
• Usedtomakeintakemanifold,timingcoverandwaterpumpgaskets
• Packagedinapolybag
1/32” x 12” x 18” sheet......................................................................... 9614 1/16” x 12” x 18” sheet......................................................................... 9615
INTAKE GASKET MATERIAL• Mr.Gasket’sown1/16”thickperformanceintakegasketmaterial
• Bulkpackaged
12” x 12”...............................................................................................77B 6” x 24”................................................................................................77C
EXHAUST GASKET MATERIAL• Mr.Gasket’sown1/16”thickexhaustgasketmaterial
• Bulkpackaged
10” x 10” Performance material.................................................................. 77 6” x 24” Performance material.................................................................77A 10” x 10” Ultra-Seal material................................................................. 5960 6” x 24” Ultra-Seal material................................................................... 5961
BLUE RTV SILICONE SEALER• Makesreliable“formed-in-place”gaskets.Resistscrackingandshrinking
• Usewithpre-cutgasketstoincreasereliability
• Temperaturerange-65oFto500oFintermittent
• Applicationsincludeintakemanifoldendseals,timingcover,water pumpandthermostathousing
Blue RTV Silicone Sealer 3 oz. tube......................................................... 7808
TEFLON TAPE• Increasesthesealingcapabilitiesonallyourthreads
• Resistanttofuelandoil
1/2” x 260”........................................................................................2842G
7808
2842G
9610
9611
9613
9614
77C
77
5690
31
GASKETSGASKETS
www.mr-gasket.com
GASKET INSTALLATION TIPSCare should be taken when installing any gasket since the performance and longevity of your engine depends on having the optimumseal. Below are some installation tips that will help you obtain the best seal on various parts of your engine.
BASIC GUIDELINESKeep in mind one of the most important requirements of building an engine is to keep everything as clean as possible; this applies to gaskets and gasket mating surfaces also. Every surface a gasket comes in contact with must be free of dirt, water, oil, grease, etc. The surface must also be flat. Warpage should not exceed .0025” in any direction. Take special care to clean the surface of old gasket material that may have stuck to either the part (oil pan, intake manifold, etc.) or the cylinder heads and block. One point often overlooked is keeping the gaskets themselves clean. This is one reason Mr. Gasket skin packages gaskets. The gaskets should not be taken out of the package until you are ready to install them.
HEAD GASKETSAfter all gasket mating surfaces have been carefully cleaned, place a straight edge across the cylinder head and engine block gasket surfaces. Flatness should not vary more than .0025”. If a variance of more than .0025” is measured, we recommend correcting this situation beforeinstalling the head gasket.
Re-tap and thoroughly clean all head bolt/stud threaded holes. If existingbolts or studs are being reused, clean threads and lightly lubricate toinsure accurate torque readings.
NOTE: Torque specs will vary with the type of lubricant used.• Use fresh 10W30 weight motor oil and follow bolt/stud manufacturer’s recommendation.• Useathreadsealerwithteflonorsiliconeonboltholesthatenter into cooling passages.• Do not use any type of adhesive or sealer on Mr. Gasket/Ultra-Seal®
head gaskets. The special coatings used on the gaskets are more than adequate to properly seal all fluid passages and minor surface
imperfections.Applying proper clamp load is one of the most important steps to asuccessful seal. After installing head gasket and cylinder head, tighten bolts/studs following engine manufacturer’s recommended torque sequence. Tighten in at least three equal steps moving the torque wrench in a smooth, even pull, which will yield the most accurate torque readings. The use of Mr. Gasket hardened washers will further reduce friction and increase torque accuracy.
INTAKE GASKETSMany performance engines have machined surfaces that cause non-parallel alignment. Before assembly, insure head and manifold mounting surfaces are parallel and head ports properly match intake ports. We offer a wide variety of port sizes to match many different port configurations. If necessary, our performance intake gaskets canbe easily cut to match most modified cylinder head and intake ports. Inspect original gasket (if available) to determine if: mounting surfaces are parallel, ports are properly matched to head and if manifold is warped.• Cleanallmountingsurfacesbeforeinstallingnewgasket.• Becarefulnottodamagemountingsurfacewhenusingascraper or wire brush.• Usegasketremovertoeaseclean-up.• Coverexposedinternalareas(liftergalleyandports)sodebriswill
not get into and damage critical engine components.
IMPORTANT: If engine is equipped with a valley pan type gasket, do not discard. On most engines, this pan will need to be reused to insure proper oil drain-back to crankcase. Clean valley pan and apply a thin bead of Mr. Gasket #7808 silicone around ports on cylinder head side of valley pan. Place in position on engine and continue toinstall the Mr. Gasket intake set.Use adhesive around water and intake ports on cylinder head side of gasket to insure a tight seal and keep the gasket from moving duringmanifold installation.NOTE: On large port applications, the gasket wall between ports isvery narrow. Be sure adhesive has cured adequately before installing intake manifold to avoid gasket shift.WARNING: For long term sealing, do not use any type of copper gasketsealer on intake gaskets. Do NOT use any sealants on o-ringed ports!
END SEAL INSTALLATION (IF APPLICABLE)Manifold front and rear end seals are supplied with most kits, In many performance applications, the manifold end gap has been reduced dueto machine work on block and cylinder heads.• Iflightmachininghasbeendone,discardtherubberseals(if supplied) and use the cork seals (apply an 1/8” bead of Mr. Gasket #7808 silicone sealer at side rail/seal intersection).• Ifgapissmallerthan3/32”,discardcorksealsanduseMr.Gasket
#7808 sealer. Apply a 1/4” bead across block surface then install intake manifold.Install bolts fingertight. Using a torque wrench, tighten to factory torque specifications. Follow proper tightening sequence. (On most V8 engines, start with center bolts and work outward in an “X” pattern).
EXHAUST GASKETSA unique feature on many of our exhaust gasket applications is the slotted end holes. They allow you to easily slide the gasket between the cylinder head and header flange after the end bolts have been started. An alternate method on gaskets without the slotted end holes is to use starter studs or Ultra-Seal header studs to temporarily hold the gasket in place. Slide the header flange onto the studs and, if using starterstuds, replace with the proper type of header bolts.CAUTION: Use care not to over-tighten headers as this can warp theflanges causing an exhaust leak. It does not matter which side of theexhaust gasket is placed against the cylinder head or header flange.NOTE: No gasket sealer is needed with the installation of Mr. GasketPerformance, Ultra-Seal, CopperSeal, Layered Aluminum or MLS Embossed exhaust gaskets.
VALVE COVER AND OIL PAN GASKETSIf existing valve covers or oil pan are being reused, clean and degrease before installing. Use gasket remover to aid in the removal of old gasket material. Check for warped or bent flanges and straightenas necessary (this is very important to insure a leak-proof seal).• Cleananyoilresidueoffvalvecoveroroilpanflangesurfaces Apply a thin coat of Mr. Gasket #7808 silicone to hold gaskets in place during installation.• Installmountingboltsandtightenevenlyinacriss-crosspattern.
Use care not to over-tighten as this will cause the flanges to bend.
FASTENERS
32
FASTENERS
www.mr-gasket.com
Mr. Gasket has been supplying quality fasteners for over 40 years. We were the first national company to make skin packaged bolt kits available in the performance market, eliminating the need to visit a local hardware store or car dealer for hard-to-find bolt sizes. All Mr. Gasket’s fasteners are designed for specific applications and are available in a wide variety of finishes including black oxide, silver
zinc, zinc dichromate (gold tone) and show quality chrome plated. Mr. Gasket has over 16 major categories of fasteners available today. If you don’t see what you need in this catalog, please give us a call or write to us as we regularly add new applications. Mr. Gasket has the high strength, quality fasteners you need for today’s performance engines.
NOTE: Always follow the enclosed instruction sheet torque values - they were developed for that specific application. If a Mr. Gasket fastener kit does not have an instruction sheet, consult a factory or aftermarket service manual where the torque specifications are listed for all critical engine and drivetrain fasteners.
SUGGESTED TORQUE SPECIFICATIONS
1/4”-20 51inchlbs. 10footlbs. 84inchlbs. 1/4”-28 57inchlbs. 11footlbs. 84inchlbs.5/16”-18 96inchlbs. 20footlbs. 13footlbs. 5/16”-24 108inchlbs. 22footlbs. 14footlbs.3/8”-16 15footlbs. 35footlbs. 23footlbs. 3/8”-24 17footlbs. 39footlbs. 25footlbs.7/16”-14 24footlbs. 56footlbs. 36footlbs. 7/16”-20 27footlbs. 62footlbs. 40footlbs.1/2”-13 35footlbs. 85footlbs. 55footlbs. 1/2”-20 40footlbs. 96footlbs. 62footlbs.
BOLT TORQUE CHART GRADE 5 GRADE 8THREAD TORQUE USING TORQUE USING TORQUESIZE 30 WT OIL 30 WT OIL USING MOLY
1/4” 45inchlbs. 108inchlbs. 72inchlbs.
5/16” 87inchlbs. 19footlbs. 12footlbs.
3/8” 14footlbs. 34footlbs. 22footlbs.
7/16” 23footlbs. 54footlbs. 35footlbs.
1/2” 33footlbs. 83footlbs. 54footlbs.
STUD TORQUE CHART GRADE 5 GRADE 8THREAD TORQUE USING TORQUE USING TORQUESIZE 30 WT OIL 30 WT OIL USING MOLY
HEX HEAD HEX 12 PT. SOCKET BUTTON FLANGE HEAD HEAD HEAD HEAD
NOTE: Stud values are calculated using coarse thread yield strength and torque applied to the fine threaded nut.
BOLT GRADE MARKINGS AND STRENGTH CHART
Mechanical Properties
Grade/Material ProofLoad(psi) Min.YieldStrength(psi) Min.TensileStrength(psi)
Grade5 = 74,000 81,000 105,000
Grade8 = 120,000 130,000 150,000
Proof Load:Anaxialtensileloadwhichfastenermustwithstandwithoutevidenceofpermanentset.Yield Strength:Themaximumloadatwhichamaterialexhibitsaspecificpermanentdeformation.Tensile Strength:Themaximumloadintension(pullingapart)whichmaterialcanwithstandbeforebreakingorfracturing.
TECHNICAL INFORMATION
33
HEAD BOLTS AND WASHERSHEAD BOLTS AND WASHERS
www.mr-gasket.com
940G
7820
87
CYLINDER HEAD BOLTS• Grade8alloysteelforextrastrengthanddurability
• Designedtocompensateforthreadlengthlostwhenusinghead boltwashers
• Blackoxidecoatedtoresistcorrosionandprovideacleanprofessional appearance
Chevrolet 265-400 Small Block (17 bolts-for one head)..............................940G Chevrolet 396-454 Big Block (16 bolts-for one head)..................................941G Ford 289-302 (10 bolts-for one head)......................................................950G Chrysler 361-440 (17 bolts-for one head).................................................953G
PREMIUM HEAD BOLT WASHERS• 4130chrome-molysteel-parallelground,heat-treatedandchamfered
•Washersare.120”thickandcanbeusedwithbothheadstudsandbolts
•Torqueaccuracyimprovedbyprovidingasmoothflatbearingsurface. Ensuresconsistenttorque(clamp-load)readings
•Coatedtoresistcorrosionandprovideacleanprofessionalappearance
7/16” ID (34/set)................................................................................... 7820
HEAD BOLT WASHERS• Madefrom.110”thicksteel
• Heat-treatedwashersreducethechanceofdamagingcylinderhead bossesandensureconsistenttorque(clamp-load)readings
•Coatedtoresistcorrosionandprovideacleanprofessionalappearance
7/16” ID (34/set)....................................................................................... 87 1/2” ID (20/set).......................................................................................87A
4375
CYLINDER HEAD DOWEL PINS• Precisionmachinedthencasehardenedforaccuratealignmentofheads
• Thesehard-to-finddowelpinsarepackaged2perset
1957-97 Small Block Chevrolet, 1968-77 350 Pontiac 5⁄16” x 5⁄8”............... 4375 1965-97 Big Block Chevrolet tubular head dowel .638/.639 O.D. by 1⁄2”....... 4377
ROCKER ARM NUTS AND STUDS
34
ROCKER ARM NUTS AND STUDS
www.mr-gasket.com
SURE-LOCK ROCKER ARM NUTS• Designedtokeeprockerarmspositivelylockedforpreciseandcritical
valvetrainadjustment
• Manufacturedfromhighgradesteelandheat-treatedforextrastrength
• Rockerarmnutsarezincdichromateplatedandsetscrewsareblack oxidecoatedtoresistcorrosionandprovideacleanprofessionalappearance
For Stock Rocker Arms Shank O.D. Stud Size Part No.Chevrolet 283-400 Pontiac 326, 400, 455 Ford 289, 302, 351W (gold finish)...................... .603”............. 3/8”........... 920G
Chevrolet 396-454 Pontiac Heavy-Duty (zinc finish)........................ .670”............7/16”...........921G
Pontiac 421, 428 Ford 351W 1969-75 (black finish)...................... .610”............5/16”...........922G
For Aluminum Rocker ArmsChevrolet 283-400 Small Block Pontiac V8 Ford 289, 302, 351W (gold finish)...................... .540”.............3/8”...........923G
Chevrolet 396-454 Pontiac Heavy-Duty (black finish)....................... .544”............7/16”...........924G
COMPETITION SCREW-IN ROCKER ARM STUDS• ManufacturedfromGrade8steelandheat-treatedforextrastrength
• Idealforhighperformancestreetandraceapplications
•Theenlargedradiusatbaseofstudabovethehexprovidesextra strengthtopreventstudflexingandbreaking
• Blackoxidecoatedtoresistcorrosionandprovideacleanprofessionalappearance
Chevrolet 265-400 3/8”-24 x 1.75” Top, 7/16”-14 Bottom (8/set)........................................ 1071 Chevrolet 265-400 3/8”-24 x 1.75” Top, 7/16”-14 Bottom (16/set)...................................... 1075 Chevrolet 396-454 (Gen IV 1965-90) 7/16”-24 x 1.75” Top, 7/16”-14 Bottom (16/set).................................... 1074Note: Modification to cylinder head rocker arm stud boss required for ChevroletSmall Block when replacing OE pressed-in rocker arm studs.
SCREW-IN ROCKER ARM STUDS• ManufacturedfromGrade8steelandheat-treatedforextrastrength
• Idealforhighperformancestreetapplications
• Easyinstallation-tapthebossincylinderheadandscrewinthestuds
• Blackoxidecoatedtoresistcorrosionandprovideacleanprofessionalappearance
Chevrolet 265-400 3/8”-24 x 1.47”L Top, 7/16”-14 Bottom (16/set).................................... 1076Note: Modification to cylinder head rocker arm stud boss required for Chevrolet Small Block when replacing OE pressed-in rocker arm studs.
ROCKER ARM STUD PINNING KIT• Preventsstudsfrombecomingloose-notforuseonhollowstuds• Idealforenginesusingpressed-inrockerarmstuds
Includes 16 roll pins, 1 special 5⁄32” drill bit.............................................806G
OIL DEFLECTING ROCKER ARM CLIPS• Designedtodeflectoilbackintorockerarm• Makesvalveadjustmenteasy-keepsenginecompartmentclean• Foruseonstockrockerarms
Chevrolet, Ford and Pontiac (8/set).......................................................... 1015
920G
1074
1076
806G
1015
35
CAM AND BALANCER BOLTSCAM AND BALANCER BOLTS
www.mr-gasket.com
944G
948G
CAM BOLTS• Grade5steelforstrengthanddurability
• IncludesflatwasherstosecureMr.Gasketcambuttons1180,1181and 1183orcanbeusedasOEreplacement
• Blackoxidecoatedtoresistcorrosionandprovideacleanprofessional appearance
Chevy Small Block, Big Block and 90° V6 engines 5/16”-18 x 3/4” Grade 5 (3/set)...........................................................944G Ford 260, 289, 302, 351W 3/8”-16 x 1-1/2” Grade 8 (Single bolt kit - not Sems type)......................949G Chrysler 426 Hemi 5/16”-18 x 3/4” Grade 5 (3/set)...........................................................944G
CAM BOLT LOCK PLATE KIT• MadeofsteelwithablackoxidefinishandcomeswiththreeGrade5bolts
• Platefitsundertheboltsandtabsbenduparoundboltheadcreating apositivelock
Cam Bolt Lock Plate - fits Small Block & Big Block Chevrolet (Except 92-96 LT1, LT4).....................................................................948G
946G
HARMONIC BALANCER BOLT & WASHER KITS• Heat-treatedGrade8alloysteelforsuperiorstrength
• Featurestallhexheadtopreventsocketslippagewhilerotatingengine
• Extrathickparallelgroundwasherprovidesmoreaccurate,uniformtorque
• Blackoxidecoatedtoresistcorrosionandprovideacleanprofessionalappearance
Chevrolet 283-400 7/16”-20 x 2-1/4”...................................................... 7845 Chevrolet 396-454 1/2”-20 x 1-1/2”........................................................ 7846 Ford - all V8 except 351C 5/8”-18 x 2”.................................................... 7847 Same as above except with standard extra thick washer and zinc dichromate gold finish
EXPRESS PRODUCTS Chevrolet 283-400 7/16”-20 x 2-1/4”......................................................945G Chevrolet 396-454 1/2”-20 x 1-1/2”........................................................946G
7845
CRANKSHAFT PULLEY BOLTS• FitsSmallBlockandBigBlockChevroletengines
• Grade5steelforstrengthanddurability
• Zincplatedtoresistcorrosionandprovideacleanprofessionalappearance
Chevrolet 262-400 1955-92, Chevrolet 396-454 1965-90..................................................................5322G
5322G
INTAKE MANIFOLD BOLTS
36
INTAKE MANIFOLD BOLTS
www.mr-gasket.com
SUPER INTAKE MANIFOLD BOLTS• Boltsfeatureawidewasherfacehexheadtospreadclampforceevenly• Grade5steelforstrengthanddurability• Extrathickflatwashersprovideuniformclamploadandpreventgalling onaluminumintakemanifolds• Blackoxidecoatedtoresistcorrosionandprovideacleanprofessionalappearance Chevrolet 265-400 3/8”-16 x 1-1/16” (12 bolts & washers)................................................... 6080 396-454 3/8”-16 x 1-1/4” (16 bolts & washers)..................................................... 6081 Ford 260, 289, 302, 351W 5/16”-18 x 2” (12 bolts & washers)......................................................... 6082 Chrysler 273-440 (Except Hemi) 3/8”-16 x 1-1/16” (12 bolts & washers)................................................... 6080 AMC 290, 343, 360, 390, 401 3/8”-16 x 1-1/16” (12 bolts & washers)................................................... 6080
INTAKE MANIFOLD BOLTSHex Head & Socket Head • Grade5steelforstrengthanddurability• Flatwashersprovideuniformclamploadandpreventgallingonaluminum intakemanifolds• Zincplatedtoresistcorrosionandprovideacleanprofessionalappearance Chevrolet 265-400 3/8”-16 x 1” Hex Head (12 bolts & washers).............................................955G 3/8”-16 x 1” Socket Head (12 bolts & washers)........................................956G 396-454 3/8”-16 x 1-1/4” Hex Head (16 bolts & washers).......................................954G 3/8”-16 x 1-1/4” Socket Head (16 bolts & washers)...................................957G Ford 260, 289, 302, 351W 5/16”-18 x 2” Hex Head (12 bolts & washers)...........................................958G Chrysler 273-440 (Except Hemi) 3/8”-16 x 1” Hex Head (12 bolts & washers).............................................955G 3/8”-16 x 1” Socket Head (12 bolts & washers)........................................956G American Motors 290, 343, 360, 390, 401 3/8”-16 x 1” Hex Head (12 bolts & washers).............................................955G 3/8”-16 x 1” Socket Head (12 bolts & washers)........................................956G
Twelve Point Head • Compactboltheadandflangeisidealforusewherespaceis minimal-typicalonlargerunnerintakemanifolds• Grade8steelforextrastrengthanddurability• Flatwashersprovideuniformclamploadandpreventgallingonaluminum intakemanifolds• Zincplatedtoresistcorrosionandprovideacleanprofessionalappearance
Chevrolet 265-400 & 90° V6 3/8”-16 x 1” (12 bolts & washers).......................................................... 6091 396-454 Single Plane Manifold 3/8”-16 x 1-3/4” (4 bolts & washers), 3/8”-16 x 1-1/4” (12 bolts & washers)..................................................... 6093 Chrysler 273-440 (Except Hemi) 3/8”-16 x 1” (12 bolts & washers)........................................................... 6091 American Motors 290, 343, 360, 390, 401 3/8”-16 x 1” (12 bolts & washers)........................................................... 6091
6080
955G
956G
6091
37
CARBURETOR STUDSCARBURETOR STUDS
www.mr-gasket.com
6345G
6346G
6310
CARBURETOR STUDS – BULLET TIP• Featureshexhead-bulletnosetipforeasyinstallationandtoguidefastener intoposition
• Varietyofstudlengthstoaccommodatemostcarburetorandspacercombinations
• Blackoxidecoatedtoresistcorrosionandprovideacleanprofessionalappearance
1-1/2” length.....................................................................................6345G 2” length...........................................................................................6346G
CARBURETOR STUDS – SOCKET HEAD• Theintegralsocketheadonthesefullythreaded5/16”-18carbstuds provideseasyinstallationandremoval
• Studsareblackoxidecoatedandhexnutscadmiumplatedtoresist corrosionandprovideacleanprofessionalappearance
1-1/2” length....................................................................................... 6310 2-1/2” length....................................................................................... 6311
CARBURETOR STUDS - STANDARDEXPRESS PRODUCTS• Varietyofstudlengthstoaccommodatemostcarburetorandspacercombinations
• Zincplatedtoresistcorrosionandprovideacleanprofessionalappearance
1-3/8” length........................................................................................... 59 1-1/2” length........................................................................................... 60 2” length................................................................................................. 61 2-1/2” length........................................................................................... 62
COMPETITION DISTRIBUTOR CLAMPCHEVROLET V8EXPRESS PRODUCTS• Clampfeaturesrollededgesforextrastrength,idealforuseonmagnetos
• Comeswithallmountinghardwareandgaskets
Chevy, small and big block V8 and 200, 229 cu. in. V6, Chrome plated finish............................................................................... 6197
60
6197
HEADER BOLTS
38
HEADER BOLTS
www.mr-gasket.com
HEADER BOLTS – STAINLESS STEEL• Madefrom304StainlessSteel-brightballburnishfinish
• Compacthexheadandflangeisidealforusewherespaceisminimal-typical onheaderflanges
• Resistcorrosionandprovidesacleanprofessionalappearance
Fits AMC 290-401, Chevrolet Small Block 262-400, Chrysler 383-440 (except 426 Hemi), Pontiac 326-455 and Oldsmobile 330-455 3/8”-16 x 3/4” (12/set)........................................................................2210G
Fits Chevrolet Big Block 396-454 and Ford 289-351W 3/8”-16 x 3/4” (16/set)........................................................................2211G
Bulk Packaged - 100 pieces 3/8”-16 x 3/4”......................................................................................918A
HEADER BOLTS – HEX HEAD• Designedforquick,easyinstallationandremoval
• Compacthexheadandflangeisidealforusewherespaceisminimal-typical onheaderflanges
• Blackoxidecoatedtoresistcorrosionandprovidesacleanprofessional appearance
Fits AMC 290-401, Chevrolet Small Block 262-400, Chrysler 383-440 (except 426 Hemi), Pontiac 326-455 and Oldsmobile 330-455 3/8”-16 x 3/4” mini 3/8” hex head (12/set)............................................... 3409 3/8”-16 x 3/4” (12/set)............................................................................ 915 3/8”-16 x 3/4” (12/set) combination hex and socket head........................3420G 3/8”-16 x 1” (12/set)............................................................................... 917
Fits Chevrolet Big Block 396-454 and Ford 289-351W 3/8”-16 x 3/4” (16/set)..........................................................................919G
Fits 340-360 Mopar engines & Hooker headers with adapter plates 5/16”-18 x 3/4” (14/set).......................................................................... 976 Bulk Packaged - 100 pieces 3/8”-16 x 3/4”......................................................................................915A 3/8”-16 x 1”........................................................................................917A
HEADER BOLTS – SOCKET HEAD• Designedforquick,easyinstallationandremoval
• Compactsocketheaddesignisidealforusewherespaceisminimal-typical onheaderflanges
• Blackoxidecoatedtoresistcorrosionandprovideacleanprofessional appearance
Fits AMC 290-401, Chevrolet Small Block 262-400, Chrysler 383-440 (except 426 Hemi), Pontiac 326-455 and Oldsmobile 330-455 3/8”-16 x 3/4” (12/set)............................................................................ 916
Fits Mopar 340-360 5/16”-18 x 3/4” (12/set)........................................................................ 3411
METRIC HEADER & EXHAUST MANIFOLD BOLTS• Designedforquick,easyinstallationandremoval
• Compactsocketheaddesignisidealforusewherespaceisminimal-typical onheaderflanges
• Blackoxidecoatedtoresistcorrosionandprovideacleanprofessionalappearance
Header Bolt: Fits Chevrolet/GM LS Series1997-Up, Ford 4.6L/5.4L Modular Series1991-Up and Mopar 5.7L Hemi 2002-Up Socket Head Bolt - 8mm-1.25 x 25mm (16/set).........................................978G
Exhaust Manifold Bolt: Fits Chevrolet/GM LS Series 1997-Up and Ford 4.6L/5.4L Modular 1991-Up Socket Head Bolt - 8mm-1.25 x 30mm (16/set).........................................979G
3420G
2210G
916
915
39
HEADER BOLT LOCK WASHERS AND STUDSHEADER BOLT LOCK WASHERS AND STUDS
www.mr-gasket.com
6312
HEADER STUDS – SOCKET HEAD• Designedandengineeredforsmalltubeheaderswithadequate clearancearoundheaderflangeboltholes
• Studslocateheaderflangesquicklyandhelpguidenutsintoposition
• Self-lockinghexflangenutsareidealforusewherespaceisminimal andhelpmaintainclamp-loadforuniformflangeseal
• Studsareblackoxidecoatedandhexnutscadmiumplatedtoresist corrosionandprovideacleanprofessionalappearance
Fits AMC 290-401, Chevrolet Small Block 262-400, Chrysler 383-440 (except 426 Hemi), Pontiac 326-455 and Oldsmobile 330-455 3/8”-16 x 1-1/2” (12 studs & nuts).......................................................... 6312
HEADER STUDS• Designedandengineeredforprofessionalracecarsandprostreetmachines
• Thesmallerthanstandardtiplocatesheaderflangesquicklyandhelp guidenutsintoposition
• Self-lockinghexflangenutsareidealforusewherespaceisminimal andhelpmaintainclamp-loadforuniformflangeseal
• Studsareblackoxidecoatedandhexnutscadmiumplatedtoresist corrosionandprovideacleanprofessionalappearance
Fits AMC 290-401, Chevrolet Small Block 262-400, Chrysler 383-440 (except 426 Hemi), Pontiac 326-455 and Oldsmobile 330-455 1/4”-28 / 3/8”-16 x 1-1/2” (12 studs & nuts)............................................ 3415
3415
HEADER-TO-MUFFLER BOLT KITS•Grade5steelforstrengthanddurability
•Stoverlocknutseliminate“old-style”splitlockwashers
•Cadmiumplatedtoresistcorrosionandprovideacleanprofessionalappearance
3/8”-16 x 1” (3 bolts & nuts).................................................................. 3413
3413
HEADER BOLT LOCK WASHERS• Designedforusewithheaderboltstopreventlooseningcausedbyvibration
• Helpsmaintainfastenerclamploadforpositiveheaderflangeseal
• Blackoxidecoatedtoresistcorrosionandprovideacleanprofessionalappearance
3/8” (12/set)........................................................................................ 3416 5/16” (12/set)....................................................................................... 3418
3416
VALVE COVER BOLTS AND STUDS
40
VALVE COVER BOLTS AND STUDS
www.mr-gasket.com
VALVE COVER SPEED STUD• Whenadditionalsealingisneededwithvacuumsystems,handtightisnot goodenough
• Thiskitfeaturesa 1/2”nutstyletobeusedwitha1/2”socketforspeedtightening
• Clearanodizedaluminumbody4-3/8”longwith1-1/2”studs
4-3/8” Long (2/kit)................................................................................... 6305
VALVE COVER STUD KITS• BulletTipdesignlocatesvalvecovergasketandhelpsguidefastener intoposition
• Grade5steelforstrengthanddurability
• Specialunder-headserrationspreventloosening.Wideflangehead distributesclamp-loadevenly
• Studsareblackoxidecoatedandhexnutscadmiumplatedtoresist corrosionandprovideacleanprofessionalappearance
1/4”-20/28 x 1-1/8” (8/kit)..................................................................... 6324 1/4”-20/28 x 1-1/2” (8/kit)..................................................................... 6329 1/4”-20/28 x 1-3/4” with nylon insert lock nuts and washers (8/kit)............. 6330
6305
6329
9823
9822
6304
5335
VALVE COVER HOLD DOWN BOLTS T-BAR STYLEEXPRESS PRODUCTS• Chromeplatedsteelwingboltsfeatureextralongstudsforthethick castvalvecovers
• Availablein3lengthsforShortorTallvalvecovers
T-Bar Wing Bolts 3 1⁄2” Long, 1⁄4”-20 thread............................................ 9818 T-Bar Wing Bolts 5” Long, 1⁄4”-20 thread................................................. 9820 T-Bar Wing Bolts 5 3⁄8” Long, 5⁄16”-18 thread.......................................... 9823
CENTER BOLT VALVE COVER BOLTSEXPRESS PRODUCTS• FitsGM1987andlaterChevy305-350engines
• Chromeplatedbuttonheadvalvecoverholddownbolts
• 1/4”-20x3-3/8”longboltsreplacetheoriginalfactorybolts
Button Head Valve Cover Hold Down Bolts (4/kit)....................................... 9822
CHROME PLATED VALVE COVER ACORN NUTSEXPRESS PRODUCTS• Machinedfromsolidsteelandchromeplated
• Acornnutsare1-3/8”Tallwith1/4”-20threadsinside
• Eachkitincludes8acornstylenutswith8set1/4”screwstuds
Valve Cove Acorn Nuts........................................................................... 6304
CUSTOM VALVE COVER NUTSEXPRESS PRODUCTS• Machinedfrom1/2”Billetaluminumwithknurledtop
• Features3/16socketheadforeasyinstallationandavailablein3colors
• Packaged4perset,2”Tallwith1/4”-20setscrewstuds 2” Tall Clear Aluminum.................................................................................... 5335 Blue Anodized...................................................................................... 5336 Red Anodized....................................................................................... 5337
41
AIR CLEANER, OIL PAN AND TIMING COVER BOLTS AND STUDSAIR CLEANER, OIL PAN AND TIMING COVER BOLTS AND STUDS
www.mr-gasket.com
5326
5327
6399
5328
OIL PAN AND TIMING COVER BOLT KITSSelf Locking• Hexflangeheaddesignwillnotfallintosocketoroutofwrench
• Grade5steelforstrengthanddurability
• Specialunder-headserrationspreventloosening.Wideflangehead
distributesclamp-loadevenly
• Boltsarezincplatedtoresistcorrosionandprovideacleanprofessionalappearance
Oil Pan Bolt Kits Chevy Small Block & 90° V6 and Olds V8 1/4”-20 x 1/2” (14/set), 5/16”-18 x 3/4” (4/set)......................................... 6085 Chevy Big Block and Pontiac V8 1/4”-20 x 3/4” (2/set), 5/16”-18 x 3/4” (20/set)......................................... 6086 Ford 289, 302, 351C&W and AMC 290, 343, 360, 390, 401
5/16”-18 x 3/4” (6/set), 1/4”-20 x 1/2” (18/set)......................................... 6087 Buick V6, Ford 390-428 and Mopar V8 5/16”-18 x 3/4” (20/set)........................................................................ 6088 Timing Cover Bolt Kits Chevy Small Block and Big Block 1/4”-20 x 1/2” (10/set).......................................................................... 6090
OIL PAN AND TIMING COVER STUD KITS• BulletTipdesignlocatesgasketandhelpsguidefastenerintoposition
• Grade5steelforstrengthanddurability
• Specialunder-headserrationspreventloosening.Wideflangehead distributesclamp-loadevenly
• Studsareblackoxidecoatedandhexnutscadmiumplatedtoresist corrosionandprovideacleanprofessionalappearance
Oil Pan Stud Kits Chevy Small Block & 90° V6 and Olds V8 1/4”-20/28 x 1-1/8” (14 studs & nuts), 5/16”-18/24 x 1-5/16” (4 studs & nuts)..........6315 Chevy Big Block and Pontiac V8 1/4”-20/28 x 1-1/8” (2 studs & nuts), 5/16”-18/24 x 1-5/16” (20 studs & nuts)..........6316 Ford 289, 302, 351C&W and AMC 290, 343, 360, 390, 401 1/4”-20/28 x 1-1/8” (18 studs & nuts), 5/16”-18/24 x 1-5/16” (6 studs & nuts)..........6317 Buick V6, Ford 390-428 and Mopar V8 5/16”-18/24 x 1-5/16” (20 studs & nuts).................................................. 6318 Timing Cover Stud Kits Chevy Small Block and Big Block 1/4”-20/28 x 1-1/8” (10 studs & nuts)..................................................... 6313
6085
6090
6313
CUSTOM AIR CLEANER NUTSEXPRESS PRODUCTS• MadefromBilletaluminumwithknurledsidesforeasygripping
• Measures3/4”talland1”Diameterwitha1/4-20thread
Clear Aluminum.................................................................................... 5326 Blue Anodized...................................................................................... 5327 Red Anodized....................................................................................... 5328
UNIVERSAL AIR CLEANER STUDSEXPRESS PRODUCTS• Thislongerstudallowsyoutousea5”filterelement
• Kitcontains5/16”studadapter,silverfinishwingnutand5”long 1/4”-20stud
Universal Air Cleaner Stud w/adapter....................................................... 6399
OIL PUMP STUD, DRAIN PLUGS AND TRANSMISSION PAN BOLTS
42
OIL PUMP STUD, DRAIN PLUGS AND TRANSMISSION PAN BOLTS
www.mr-gasket.com
7825
OIL PUMP STUD KIT• Heattreated8740chrome-molysteelforextrastrengthanddurability
• Allowsfast,easyoilpumpinstallationandremovalwithoutdangerof
strippingthreadsinrearmaincap
• Studfeaturesrolledthreadsafterheattreatprocessforextrastrength
• Includesparallelground,heat-treatedflatwasherandGrade8hexnut
• Blackoxidecoatedtoresistcorrosionandprovideacleanprofessional appearance
Chevy Small Block, Big Block and 90° V-6................................................ 7825
15
MAGNETIC OIL PAN DRAIN PLUG• Themagneticdrainplugaccumulatesmetalparticlesfoundintheoil, preventingpossibledamagetotheengine
Fits all Chevrolet; Chrysler 1962-83; Ford 1957-83; all Pontiac V8; Olds 1966-83; Buick 1959-83 - 1/2”-20..........................................................15 Replacement nylon oil pan drain plug washers - 1/2” I.D. (5/kit).......................16
6089
TRANSMISSION PAN / DIFFERENTIAL COVER BOLT KITS
• Hexflangeheaddesignwillnotfallintosocketoroutofwrench
• Grade5steelforstrengthanddurability
• Boltsarecadmiumplatedtoresistcorrosionandprovidea cleanprofessionalappearance
5/16”-18 x 3/4” (17/kit)......................................................................... 6089
4470
UNIVERSAL AUTOMATIC TRANSMISSION OIL PAN DRAIN PLUG• Forusewithanyautomatictransmissionoilpan-makesfluidchanges possiblewithoutremovingthepan
• Brassplugprovidesforaconvenientandquickseal
Requires a 1⁄2” diameter hole for installation............................................ 4470
43
DRIVE TRAIN FASTENERSDRIVE TRAIN FASTENERS
www.mr-gasket.com
TORQUE CONVERTER AND FLEX PLATE BOLTS• Grade8steelforextrastrengthanddurability
• Completewithlockwasherswhererequired
• Blackoxidecoatedtoresistcorrosionandprovideaclean professionalappearance
Torque Converter to Flex Plate BoltsApplication Size Qty/Set Part No.GMTH350,Powerglide 3/8”-24x5/8”(w/nuts) 3................ 6716GMTH400 3/8”-16x1/2” 3................ 6715GM10”RaceConverter 7/16”-20x1-1/4”(w/nuts) 3................ 6719Ford 3/8”-24(flangedlock 4................ 6717 nutsonly)Chrysler(ExceptHemi) 5/16”-24x7/16” 4................ 6718
Flex Plate to Crankshaft BoltsApplication Size Qty/Set Part No.GM(All) 7/16”-20x11/16” 6................ 6710Ford 7/16”-20x13/16” 6................ 6711Chrysler(ExceptHemi) 7/16”-20x1/2” 6................ 6712
FLYWHEEL AND PRESSURE PLATE BOLTS• Grade8steelforextrastrengthanddurability
• Completewithlockwasherswhererequired
• Blackoxidecoatedtoresistcorrosionandprovideaclean professionalappearance
Pressure Plate BoltsApplication Size Qty/Set Part No.GM(Borg-Beck/Diaphragmstyle) 3/8”-16x1” 6.................. 910 Ford(allLong-style) 5/16”-18x1” 6.................. 911Chrysler(Borg-Beck/Diaphragmstyle) 3/8”-16x1” 6.................. 910AMC(Borg-Beck/Diaphragmstyle) 3/8”-16x1” 6.................. 910
Flywheel BoltsApplication Size Qty/Set Part No.Chevrolet 7/16”-20x31/32” 6.................. 912ChryslerHemi 1/2”-20x1” 8.................. 913AMC/Pontiac 1/2”-20x1 6.................. 914Ford 7/16”-20x31/32” 6.................. 912
RING GEAR BOLTS• Grade8steelforextrastrengthanddurability
• AvailableinstockOElengthsorspeciallengthsforusewithMr.Gasket ringgearspacers
• Blackoxidecoatedtoresistcorrosionandprovideaclean professionalappearance
Stock Length Ring Gear Bolts GM 10 bolt, 8.5” ring gear (Exc. “O” axle), 7/16”-20 x 7/8” Left Hand Thread (10/set).....................................................................2092G GM 12 bolt-all applications 3/8”-24 x 13/16” (12/set)................................ 2093 Ford 9” ring gear (Exc. Traction-Lok) 7/16”-20 x 31/32” (10/set)................. 2094
Longer Than Stock Ring Gear Bolts (For use with ring gear spacers) Chevrolet 3/8”-24 x 1” (10/set)................................................................. 905 Pontiac/Olds 3/8”-24 x 1” (12/set)............................................................. 906 GM, Late 10 bolt 7/16”-20 x 1-1/4” Left Hand Thread (10/set)....................... 908 Late Chevrolet 3/8”-24 x 1-1/8” (12/set).................................................... 907 Dana 60 1/2”-20 x 1-5/16” (12/set).......................................................2091G
6716
6710
910
912
2094
DRIVE TRAIN FASTENERS, WHEEL STUDS AND LUG NUTS
44
DRIVE TRAIN FASTENERS, WHEEL STUDS AND LUG NUTS
www.mr-gasket.com
3680
MAGNETIC TRANS / REAR END DRAIN PLUG 1⁄2” NPT - fits most standard transmissions and rear ends......................... 3680
Stud Knurl Drill PartApplication Dia. Hole No
7⁄16” – 20 x 2-5⁄8” fits 1963-75 Chevrolet .480” .469”..............4310G
1⁄2” – 20 x 2-7⁄8” fits Chrysler, Ford and most applications with 1⁄2” studs .665” .641”................ 4311
COMPETITION WHEEL STUDS• Extralongpressinstudsavailableforcompetitionuse
• MadefromGrade8steelandplatedforlongliferustresistance
• NHRAApproved
4310G
4300G
COMPETITION OPEN-END LUG NUTS• Openendfeatureallowsyoutoinspectthreaddepth
• Fitsmostpopularmagwheelsandstuddiameters
7⁄16” RH, Rear, 3⁄4” Shank Length (5/set).............................................. 4300G 1⁄2” RH, Rear, 3⁄4” Shank Length (5/set)................................................ 4301G 7⁄16” RH, Cragar Super Trick, Front, 1-3⁄8” Shank Length (5/set)............. 4302G 1⁄2” RH, Cragar Super Trick, Front, 1-3⁄8” Shank Length (5/set)............... 4303G 7⁄16” RH, Cragar, 1” Shank Length (5/set)................................................. 4304 1⁄2” RH, Cragar, 1” Shank Length (5/set).................................................. 4305
4318
TIRE SCREW KIT• Designedtopreventreartirefromslippingonrimwithlowtirepressure
• Grade8case-hardenedhexheadscrews
• Kitcontains3/16”drillbitandenoughhardwaretocompletetwowheels
• Cadmiumplatedtoresistcorrosionandprovideacleanprofessionalappearance
#14 x 3/4” (35/set).................................................................................. 4318
45
CHROME PLATED FASTENERSCHROME PLATED FASTENERS
www.mr-gasket.com
CHROME PLATED FASTENERS• ShowqualitychromeplatedfastenersavailableinyourchoiceofGrade5 hexhead,Grade8socketheadorGrade8twelvepointhead
• Boltheadsareindividuallypolishedtoahighlusterthenchromeplated forlastingbeauty
• Kitscomecomplete(exceptwherenoted)with“AN”typewashers
Engine Bolt KitsChevy Small Block - Deluxe Kit (Intake, Timing Cover, Oil Pan, Fuel Pump,
Water Neck, Long Water Pump, Headers)24 1/4”-20x1/2” 4 5/16”-18x3/4” 12 3/8”-16x3/4” 13 3/8”-16x1” 2 3/8”-16x1-1/4” 4 3/8”-16x2” 1 3/8”-16x2-1/4” 10 1/4”ANWashers 14 1/4”FlatWashers20 3/8”ANWashers HexHead...............5001Chevy Small Block - Engine Bolt Kit (Intake, Timing Cover, Water Neck) 14 3/8”-16x1” 10 1/4”-20x1/2” 1 3/8”-16x2-1/4” 10 1/4”FlatWashers 14 3/8”ANWashers
(Fits early and late water necks) HexHead...............5000Intake Bolt KitsChevy Small Block 12 3/8”-16x1” HexHead...............500212 3/8”ANWashers 12PtHead.............5003 Chevy Big Block
16 3/8”-16x1-1/4” Hex........................500416 3/8”ANWashers 12PtHead.............5005 Ford 289, 302, 351W
12 5/16”-18x2”
12 5/16”ANWashers HexHead...............5006Valve Cover Bolt Kits4 1/4”-20x3/4” HexHead...............50194 1/4”ANWashers SocketHead..........25074 1/4”-20x1” HexHead...............25014 1/4”ANWashers SocketHead..........25064 1/4”-20x3-3/8” 4 1/4”ANWashers
(Fits 86-up Chevrolet Small Blocks) ButtonHead..........98224 5/16”-18x3/4”4 5/16”ANWashers HexHead...............25084 5/16”-18x1”4 5/16”ANWashers HexHead...............2505Valve Cover Stud Kits8 1/4”-20x1-3/8”Nuts(Acorn Head) 8 1/4”-20x7/8”Studs HexHead...............6304
5001
5003
5019
9822
CHROME PLATED FASTENERS
46
CHROME PLATED FASTENERS
www.mr-gasket.com
CHROME PLATED FASTENERS (CONT)
Timing Cover Bolt KitsChevy Small Block and Big Block 10 1/4”-20x1/2” HexHead.............500810 1/4”Washers 12PtHead...........5009Oil Pan Bolt KitsChevy Small Block 14 1/4”-20x1/2” 4 5/16”-18x3/4” 14 1/4”FlatWashers4 5/16”FlatWashers HexHead.............5010Rear End Cover Bolt KitsGM 10 & 12 Bolt12 5/16”-18x3/4” HexHead.............5016Transmission Pan Bolt KitsGM TH 350 & TH 400 13 5/16”-18x3/4”13 5/16”ANWashers HexHead.............5012Header Bolt Kits12 3/8”-16x3/4” HexHead*............5025 *(withsmall7/16”head) SocketHead...........4985Fuel Pump Bolt KitsChevy Small Block and Big Block 2 3/8”-16x1-1/4”2 3/8”ANWashers HexHead.............4993Block-Off Plate Bolt Kits Chevy Small Block 2 3/8”-16x3/4” 2 1/4”-20x1/2” 2 3/8”ANWashers2 1/4”ANWashers HexHead.............4987Water Pump Bolt KitsChevy Small Block with Short Pump 1 3/8”-16x2-1/2” 3 3/8”-16x1-3/4”4 3/8”ANWashers HexHead.............4996Chevy Small Block and Big Block with Long Pump 4 3/8”-16x2” HexHead.............49984 3/8”ANWasher 12PtHead...........4999Chrome Pipe Plug Set 2 1/8”NPT 2 1/4”NPT 2 3/8”NPT2 1/2”NPT SocketHead........ 6352G
5008
5025
5010
6352G
47
PIPE PLUGS, FREEZE PLUGS AND CLAMPSPIPE PLUGS, FREEZE PLUGS AND CLAMPS
www.mr-gasket.com
ALUMINUM PIPE PLUGS• Blueanodizedaluminumpipeplugsincorporateacountersunkheadfor neatappearance
• Idealforintakemanifolduseandavailablein2sizes 3⁄8” NPT Hex Head (4/kit)....................................................................... 6352 1⁄2” NPT Square Head (2/kit).................................................................. 6353
BRASS FREEZE PLUG KITS• Idealforstoredvehiclesaswellaseverydaystreetuse
• Eachkitincludesallplugsneededforacompleteengine
• Eliminateanychanceofrustedoutfreezeplugswiththesekits
Chevrolet Small Block .......................................................................... 6481 Chevrolet Big Block .............................................................................. 6482 Ford 260-351W..................................................................................... 6483
MOUNTING CLAMPS• Steelstrapfeaturesarubbercentertosecurelymountwiresandlines withoutdamage
• Mountsquicklytoanysolidsurface
3⁄16” I.D. (6/set).................................................................................3770G 1⁄4” I.D. (6/set)...................................................................................3771G 3⁄8” I.D. (6/set)...................................................................................3772G 1⁄2” I.D. (6/set)...................................................................................3773G 9⁄16” I.D. (6/set)................................................................................... 3774 5⁄8” I.D. (6/set)...................................................................................3775G
FUEL LINE CLAMPS• Stainlesssteelhoseclampsfithosefrom5/16”to7/8”O.D.
(4/set)................................................................................................. 1925
6352
6353
6481
3770G
1925
PROMOTIONAL ITEMS
48
PROMOTIONAL ITEMS
www.mr-gasket.com
NOSTALGIC CORKY METAL SIGN• Metalsignfeaturesembossmentsforastunninggoodlook
• Vividfourcolorgraphicswillnotfade
• 3holesforeasymounting
• Clamshellpackagetoeliminatescratchesinshipment
Corky Metal Sign 13 1/2” x 11”...................................................................4C
DECALSSilkscreenedonvinyl,theseself-adhesivedecalssticktoanyclean,drysurface. Mr. Gasket Logo, 5” x 1-1⁄4”........................................................................ 4 Mr. Gasket Logo, 1-1⁄2” x 3”......................................................................4A Hays Logo, 5” x 8”.............................................................................75-701 Lakewood Logo, 6-1/2” x 6-3⁄4”........................................................... 60030 ACCEL Logo, 3-3⁄4” x 9-1⁄2”..............................................................M23957 Mallory Logo, 4” x 9”.............................................................................. D-2 Assorted Performance People Decals.....................................................7007G
CUSTOM COUNTER STOOLS• PremiumqualityDiner-Stylecounterstoolis301/2”tallwitha 15”dia.cushionseatthatswivelsafull360°
• Nicelypaddedseatsfeaturesrenownedbrandlogos
• Super-strongallsteelconstructionisdesignedforrock-solidstability
• Triplechromeplatedfinishlooksgreatinanyroomfordecorandfoot padsresistfloormarring
• Easytoassemblewithsimplehandtoolsandincludesallhardwareand instructionsforfastassembly
Mr. Gasket.......................................................................................74323G Corky..............................................................................................74346G
PERFORMANCE BANNERSIdealforuseattheraces,inperformanceshopsandongaragewalls,thesebannersaremadefromheavygaugeplasticandmeasureapproximately 3’X6’.Designedforoutdoorandindoorusage,thebannershavesewnedgesforadditionalstrengthandbrassplatedcornereyeletsforeasyhanging.
Performance Banner.........................................................................72666G
4C
74323G
74346G
7007G
72666G
THE HISTORY OF MR. GASKET 1964-2011
49
INDEXTHE HISTORY OF MR. GASKET 1964-2011 INDEX
www.mr-gasket.com www.mr-gasket.com
For over 45 years, the name Mr. Gasket has been synonymous with race-winning power and performance. To ensure that the Mr. Gasket brand remains dominant for many years to come, our team continues to drive with focus, a commitment to our core market and a keen sense of what the customer wants.
The history of the Mr. Gasket brand is a real American success story. Mr. Gasket was formed by Joseph F. Hrudka in 1964. Using his own 1957 Chevy drag race car as a test vehicle, he recognized the need and developed a plan to create a line of engine gaskets and fasteners proven to seal and withstand extreme engine temperatures, pressures and stresses created by high performance race engines used in the ever-growing sport of drag racing.
The Mr. Gasket products, proven over time on racing circuits and drag strips around the world, have earned legendary status in motorsports and an unparalleled reputation in the marketplace.The products are used by everyone from everyday drivers to grassroots enthusiasts to top name racers. The goal has always been to lead the market with innovative new products designed to push the power, speed, and performance of street and strip machines as quickly as automotive technology advances.
This legendary name in the industry, Mr. Gasket, offers much more than just gaskets. The Mr. Gasket brand also provides a variety of performance and racing products for all parts of your vehicle including: carburetor and fuel accessories, chrome-plated accessories, cooling system accessories, engine components, ignition and electrical accessories, shifter accessories, specialty tools, suspension and driveline components. Find out about all of the Mr. Gasket products and applications at www.Mr-Gasket.com.
1964 2011
PART PAGE4...................484A ................484C ................4815.................4216.................4217.................1518...........11, 1229...........11, 1230.................2134G ..............1547C ..............2648C ..............2648C ..............2649.................2649C ..............2650G ..............2651.................2652.................2654.................2654C ..............2654C ..............2655.................2655C ..............2655C ..............2656.................2656A ..............2656C ..............2656C ..............2657.................2657A ..............2657B ..............2657C ..............2658B ..............2658C ..............2658E ...............2658F ...............2659.................3760.................3761.................3762.................3763.................2965.................2975-701 .........4876.................2876C ..............2877.................3077A ..............3077B ..............3077C ..............3081.................2981A ..............2982.................2983G ..............2984.................2984A ..............2984B ..............2987.................3387A ..............3390...........11, 1290A ..............1591.................1793...........11, 1294.................15100.................9101.................9101B ..............9101G ..............9102G ..............9106.................9107...............13108...............13110...............13111.................9113.................9116.................9117...............13121...............13
PART PAGE122...............13125.................9126.................9128...............13135G ..............9136G ..............9138G ..............8139G ..............9142...............29143.................9145.................9146.................9148...............18149...............18150...............10150A ............10150B ............10150C ............10150D ............10152...............14152A ............14153...............14154...............14155...........8, 10168...............11175...............11177...............14179...............11181...............11182...............14183G ............11185...............11189...............11190...............11192...............14195...............14196...............11197...............14198...............11201G ............19202A ............19202G ............19203G ............18204G ............18205G ............19206G ............19207G ............19208A ............19208G ............19209G ............18210...............18211...............18213...............18214...............18215G ............18222...............18223...............18229...............19235...............19236...............19251...............20252...............20253...............19253A ............19254G ............20257G ............20258G ............19259A ............20259G ............20260.........18, 19263G ............19264G ............19274...............20275...............20276...............20278...............20290...............21
PART PAGE291...............20292...............21293...............20301...............16302...............16303G ............16306G ............16307G ............16311G ............16312...............16316...............16351...............16353...............16358...............16374...............17375G ............17378...............17379...............17380...............17382...............17384...............17394...............17397...............17404...............22405G ............22420...............13425...............13453...............23476...............23490...............23502G ............23503G ............23550A ............24550G ............24551...............24576...............24577...............14585G ............11586G ............14651G ..............7652G ..............7671G ............27672G ............27673G ............27674G ............27722G ............24738G ............11738G ............11738G ............11740.... 11, 12, 15740C ............11740C ............11740C ............11745...............17746...............21746C ............21748...............21757...............26758...............26770G ............27780G ............21780G ............21781G ............17790...............17792G ............21793G ............21794G ............21795G ............21800G ..............7806G ............34850.................7851.................7875.................7890.................7905...............43906...............43907...............43
PART PAGE908...............43910...............43911...............43912...............43913...............43914...............43915...............38915A ............38916...............38917...............38917A ............38918A ............38919G ............38920G ............34921G ............34922G ............34923G ............34924G ............34940G ............33941G ............33944G ............35944G ............35945G ............35946G ............35948G ............35949G ............35950G ............33953G ............33954G ............36955G ............36956G ............36957G ............36958G ............36976...............38978G ............38979G ............381015.............341052G ............81071.............341074.............341075.............341076.............341121G ..........151130G ............81131G ..........131132G ..........181134G ............81135G ..........151192.............281192C ..........281203.............281203C ..........281204.............281204C ..........281205.............281509.............251925.............471960.......11, 121961.......11, 121962.............121963.............211964.............211965.......21, 231968.............171969.............152091G ..........432092G ..........432093.............432094.............432210G ..........382211G ..........382492.............292501.............452505.............452506.............452507.............452508.............45
PART PAGE2842G ..........303030G ............83131G ............83132G ............83133G ............83140G ............83143G ............83144G ............83150G ..........133151G ..........133152G ..........133156G ..........133157G ..........133158G ..........133165G ..........183166G ..........183175G ..........183176G ..........183180G ..........183185G ..........223188G ..........223210G ..........153211G ..........153217G ..........153218G ..........153222G ..........153226G ..........153233G ..........153409.............383411.............383413.............393415.............393416.............393418.............393420G ..........383680.............443770G ..........473771G ..........473772G ..........473773G ..........473774.............473775G ..........473953.............124249G ..........264254G ..........264254G ..........264255G ..........264255G ..........264256G ..........264257G ..........264257G ..........264258G ..........264258G ..........264277G ..........264278G ..........264300G ..........444301G ..........444302G ..........444303G ..........444304.............444305.............444310G ..........444311.............444318.............444375.............334377.............334400.............124403.............124404.............154405.............154406.............124407.............124408.............124410.............214422.............244424.............174470.............42
PART PAGE4603G ..........294605G ..........294665G ............94666G ............94667G ............94668G ............94670G ..........134671G ..........134672G ..........134675G ..........134680G ..........184681G ..........184682G ..........184685G ..........194690G ..........164691G ..........164692G ..........164694G ..........224695G ..........224793G ..........114793G ..........114794G ..........154800G ..........104801G ..........104802G ..........104803G ..........104804G ..........104805G ..........104815G ..........144816G ..........144825G ..........194885G ..........284886G ..........284887G ..........284985.............464987.............464993.............464996.............464998.............464999.............465000.............455001.............455002.............455003.............455004.............455005.............455006.............455008.............465009.............465010.............465012.............465016.............465019.............455025.............465322G ..........355326.............415327.............415328.............415335.............405336.............405337.............405713G ............85714G ............85715G ............85716G ............85727G ............85780G ............85784G ..........155788G ..........225790G ..........185799G ............85800G ............85801G ............85802G ..........135804G ..........135805G ..........155807G ..........18
PART PAGE5808G ..........185809G ..........185810G ..........235812...............95813...............95814...............95817.............135818.............135819.............135820...............95821...............95822...............95823...............95824...............95827.............135828.............135831.............185832.............185834.............185835.............185836.............185837.............185838.............195839.............195840.............165841.............165844...............75848.............235851...............95853G ..........115854G ..........145855.............115857.............145859G ..........205860.............115861.............115862.............145863.............145864.............115866G ..........175867.............115869.............245870.............205871.............205872.............145875.............235876.............175877.............175880.............115881.............115882.............115883.............145884.............115885.............115889.............245890.............205891.............205892.............205895.............175900.............105901.............105902.............105903.............105904.............105905.............105906.............105907.............105908.............105910.............145911.............145912.............145913.............145914.............145916.............105917.............105919.............105920.............24
PART PAGE5921.............245927.............195928.............195929.............195930.............195931.............205932.............195935.............165936.............165937.............165938.............165939.............165944.............165945.............235947.............145949.............165950...............75951.............195952.............205953.............205954.............205958.............105959.............205960.............305961.............305964.............105965.............105966.............105967.............215969.............285970.............285971.............285972.............285980.............285981.............235983.............215985.............215986.............215988.............215989.............215990.............215991.............125992.............125994.............175995.............155996.............155997.............245998.............175999.............176058.............256080.............366081.............366082.............366085.............416086.............416087.............416088.............416089.............426090.............416091.............366093.............366100G ..........126177.............256178.............256179.............256183.............256185.............256186.............256197.............376199.... 11, 12, 156304.......40, 456305.............406310.............376311.............376312.............396313.............416315.............41
PART PAGE6316.............416317.............416318.............416324.............406329.............406330.............406345G ..........376346G ..........376352.............476352G ..........466353.............476399.............416452.............106460.............196481.............476482.............476483.............476560.............116561.............116663G ..........146664G ..........146665G ..........116683.............206684.............206710.............436711.............436712.............436715.............436716.............436717.............436718.............436719.............437007G ..........487100.............127101.............127102.............127103.............127104.............127106.............157108.............127110.............177112.............177115.............177118...............77120.............217121.............217123.............217124.............217125.............217127.............217129.............217130.............217140.............237141...............77142...............77145.............247146.............127147.............127148.............127149.............127150.............107151.............107152G ..........107153.............107154.............107157.............147158.............147160.............197161.............197164.............207165.............207166.............167167.............167170.............237171.............247174...............77176.............28
PART PAGE7176C ..........287177.............287177C ..........287178.............287178C ..........287215.............227216.............227225.............227230.............227235.......16, 227401G ..........107402G ..........107407G ..........147410G ..........197411G ..........197420G ..........287421G ..........287422G ..........287505.............107523.............247529...............77530...............77554.............207555.............207556.............197558.............197559.............197592.............167593.............167594.............167602G ..........297650G ..........277651G ..........277652G ..........277653G ..........277654G ..........277656G ..........277657G ..........277659G ..........277660G ..........277664G ..........277665G ..........277808.............307820.............337825.............427845.............357846.............357847.............358304.............258685G ..........298686G ..........298687G ..........298690.............298691.............298693.............298695.............298697.............299610.............309611.............309612.............309613.............309614.............309615.............309818.............409820.............409822.............409822.............409823.............4060030...........4872666G ........4874323G ........4874346G ........48D-2 ...............48M23957 ........48
Mr. Gasket is a trademark of Prestolite PerformanceCLEVELAND, OHIO 216-688-8300
www.mr-gasket.com©2010 Printed in U.S.A. 74513G
2011PERFORMANCE
GASKET & FASTENERCATALOG