MPS-600 e-drum moduleimages6.thomann.de/pics/atg/atgdata/document/manual/c... · 2014. 5. 1. · e-drum module user manual. Musikhaus Thomann e.K. Treppendorf 30 96138 Burgebrach

MPS-600e-drum module

user manual

Musikhaus Thomann e.K.

Treppendorf 30

96138 Burgebrach

Germany

Telephone: +49 (0) 9546 9223-0

E-mail: [email protected]

Internet: www.thomann.de

19.03.2014, ID: 224592

Table of contents

1 General notes............................................................................................................................................... 5

2 Safety instructions..................................................................................................................................... 7

3 Features....................................................................................................................................................... 10

4 Installation.................................................................................................................................................. 11

5 Operating elements............................................................................................................................... 14

6 Operation.................................................................................................................................................... 216.1 Quick start........................................................................................................................................... 216.2 LCD display......................................................................................................................................... 256.3 Storing functions.............................................................................................................................. 266.4 Drum kits............................................................................................................................................. 276.5 Mixer functions................................................................................................................................. 406.6 Playing and adapting songs......................................................................................................... 466.7 Muting.................................................................................................................................................. 546.8 Record function................................................................................................................................ 566.9 Click functions................................................................................................................................... 63

Table of contents

MPS-600

3

6.10 Utility menu..................................................................................................................................... 656.11 SD card............................................................................................................................................... 73

7 Technical specifications....................................................................................................................... 82

8 Cleaning....................................................................................................................................................... 84

9 Protecting the environment.............................................................................................................. 85

10 Appendix..................................................................................................................................................... 8610.1 Trigger and pads............................................................................................................................ 8610.2 Pre-installed drum kits................................................................................................................. 8910.3 Voice list............................................................................................................................................ 9110.4 Song list.......................................................................................................................................... 118

Table of contents

e-drum module

4

1 General notes

This user manual contains important information on safe operation of the device. Read andfollow all safety notes and all instructions. Save this manual for future reference. Make surethat it is available to all persons using this device. If you sell the device to other users, be surethat they also receive this manual.

Our products are subject to a process of continuous development. We therefore reserve theright to make changes without notice.

This section provides an overview of the symbols and signal words used in this user manual.Symbols and signal words

General notes

MPS-600

5

Signal word Meaning

DANGER! This combination of symbol and signal word indicates animmediate dangerous situation that will result in death orserious injury if it is not avoided.

CAUTION! This combination of symbol and signal word indicates a pos‐sible dangerous situation that can result in minor injury if itis not avoided.

NOTICE! This combination of symbol and signal word indicates a pos‐sible dangerous situation that can result in material andenvironmental damage if it is not avoided.

Warning signs Type of danger

Warning – danger zone.

General notes

e-drum module

6

2 Safety instructions

Drum modules are intended to be used for converting digital trigger signals from drum padsto various percussion sounds. Use the unit only as described in this manual. Any other use oruse under other operating conditions is considered to be improper and may result in personalinjury or property damage. No liability will be assumed for damages resulting from improperuse.

This device may be used only by persons with sufficient physical, sensorial, and intellectualabilities and having corresponding knowledge and experience. Other persons may use thisdevice only if they are supervised or instructed by a person who is responsible for their safety.

Intended use

Safety instructions

MPS-600

7

DANGER!Danger for childrenEnsure that plastic bags, packaging, etc. are disposed of properly and are notwithin reach of babies and young children. Choking hazard!

Ensure that children do not detach any small parts (e.g. knobs or the like) fromthe unit. They could swallow the pieces and choke!

Never let children unattended use electrical devices.

CAUTION!Possible hearing damageWith loudspeakers or headphones connected, the device can produce volumelevels that may cause temporary or permanent hearing impairment.

Do not operate the device permanently at a high volume level. Decrease thevolume level immediately if you experience ringing in your ears or hearingimpairment.

Safety

Safety instructions

e-drum module

8

NOTICE!Operating conditionsThis device has been designed for indoor use only. To prevent damage, neverexpose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, andstrong vibrations.

NOTICE!External power supplyThe device is powered by an external power supply. Before connecting theexternal power supply, ensure that the input voltage (AC outlet) matches thevoltage rating of the device and that the AC outlet is protected by a residual cur‐rent circuit breaker. Failure to do so could result in damage to the device and pos‐sibly the user.

Unplug the external power supply before electrical storms occur and when thedevice is unused for long periods of time to reduce the risk of electric shock orfire.

Safety instructions

MPS-600

9

3 Features

n 674 voices (drums, percussion, SFX …) and 18 hi-hat combinationsn 99 pre-installed drum kits (40 preset kits, 59 user kits)n 120 preset songs, 100 user songsn Maximum polyphony: 64n Sequencer, click, mixer and EQn MIDI functions, SD card slotn Headphones, USB- and MIDI connections

Features

e-drum module

10

4 Installation

Setup and installation of the pads and pedals are described in detail in the included setupguide. Finally, check that all connecting cables between the pads and the drum module areconnected correctly.

Connect the supplied power adapter to the 9 V input of the device and then insert the mainsplug into a mains wall outlet.

Setup, connecting pads andpedals

Connecting the power supply

Installation

MPS-600

11

Connect your stereo headphones to the PHONES output of the drum module.

Connect the inputs of your amplifier or powered speaker to the ‘OUTPUT’ sockets of the drummodule. When using a mono amp, connect its input to the ‘L/MONO’ output socket of themodule.

Connecting headphones

Connecting audio devices

Installation

e-drum module

12

Connect external MIDI devices to the ‘MIDI IN/OUT’ connections or the USB socket of the drummodule.

Connect CD or MP3 player to the ‘AUX IN’ input of the drum module.

Connecting MIDI devices

Connecting CD or MP3 player

Installation

MPS-600

13

5 Operating elements

Front panel

Operating elements

e-drum module

14

1 Display

2 [PAGE +], [PAGE –]

Navigation buttons to scroll through the menu pages and to move the cursor.

3 VOLUME

Volume controls for the headphones output (PHONES), AUX input (AUX IN) and overall volume (MASTER)

4 [SAVE/ENTER]

Button to save changed settings and to open sub menus and folders.

5 [EXIT]

Button to leave the current menu level and to cancel a function.

6 [CARD]

Button to open the SD card menu.

7 [+], [–]

These buttons increase or decrease the value of the currently indicated parameter.

Operating elements

MPS-600

15

8 Jog Wheel

Use the wheel to increase or decrease the value of the currently indicated parameter.

9 [TEMPO +], [TEMPO –]

Buttons to increase or decrease the tempo of song playback and click. To reset, press both buttons simultaneously.

10 [CLICK]

Turns the click function on or off.

11 [MIXER]

Button to open the mixer menu.

12 [MENU]

Button to open various menus of an operating mode.

13 [PART MUTE]

To mute the desired tracks.

14 [REC]

Button to enter the record mode.

Operating elements

e-drum module

16

[REC] + [PART MUTE]

Button combination for ‘Quick Record’ function.

15 [PLAY/STOP]

Button to start or stop song playback and recording.

16 [KIT]

Button to open the kit menu.

17 [UTILITY]

Button to open the utility menu.

[UTILITY] + [KIT]

Button combination for entering the demo mode.

18 [SONG]

Button to open the song menu.

Operating elements

MPS-600

17

19 Pad select buttons with indicator LED

Buttons to play the programmed pad voice in the current kit. In the menus KIT, MIXER and UTILITY, you can use thesebuttons to select the desired pad. After selecting, the indicator LED of the corresponding pad will light up. In themodes SONG / DEMO / CARD, the LEDs indicate the currently playing pad.

20 [RIM]

Button to activate the Rim trigger of dual zone pads.

Operating elements

e-drum module

18

Rear panel

Operating elements

MPS-600

19

21 9 V

Socket for the connection of the power adapter for voltage supply.

22 POWER ON / OFF

Main switch to turn the unit on or off.

23 USB

USB port to connect a computer with USB MIDI interface.

24 MIDI IN / MIDI OUT

Connections for external MIDI devices.

25 Pad connection sockets.

26 Headphones output.

27 OUTPUT R / L/MONO

Stereo output for external audio systems and drum amps.

28 AUX IN

Stereo input for external audio devices like MP3 or CD players.

Operating elements

e-drum module

20

6 Operation

6.1 Quick start

In this chapter we describe some basic functions such as playing demo songs, the selection ofdrum kits, voices and songs as well as the use of the click function of the e-drum set. The sub‐sequent chapters then describe in detail the various features, programming functions andparameters. A list of all available voices, songs and kits can be found in the appendix of thismanual.

Connect the power adapter to the 9V input on the device and then insert the plug of thepower cord into a mains wall outlet. To turn the device on and off use the [POWER ON/OFF]switch (22).

When the unit is not used, it will switch off automatically after 30 minutes.

Switching on / off

Automatic switchoff

Operation

MPS-600

21

To deactivate the automatic switchoff or adjust the automatic switchoff time, press the[UTILITY] button to open the ‘Utility’ menu. Then select the ‘AUTOPOWER’ option with the[PAGE +] or [PAGE –] buttons and open the submenu with [SAVE/ENTER]. Now use the jogwheel or press the [+] and [–] buttons to select between the following options:

n ‘30MIN’ (automatic switchoff after 30 minutes)n ‘60MIN’ (automatic switchoff after 60 minutes)n ‘Off’ (automatic switchoff deactivated).

Press the [KIT] and [UTILITY] buttons simultaneously to enter the Demo mode. Use the jogwheel or press the [+] / [–] buttons to select one of the available demo songs ‘FUSION’ or‘WORLD’ . Playback starts automatically. During playback, you can use the jog wheel or pressthe [+] / [–] buttons to change between the demo songs. To exit, press [PLAY/STOP].

The E-drum set offers 40 pre-installed drum kits in total. Press the [KIT] button and select thedesired drum kit using the jog wheel or the [+] / [–] buttons. For more information about drumkits, settings and functions, see Ä Chapter 6.4 ‘Drum kits’ on page 27.

Demo songs

Drum kits

Operation

e-drum module

22

The E-drum set offers in total 220 preset (1…120) and user songs (121…220). To select andplay a preset song, press [SONG] and select the desired song using the jog wheel or the [+] / [–]buttons. Use the [PAGE +/–] buttons to jump directly between the song groups (seeÄ Chapter 10.4 ‘Song list’ on page 118). For more information about song settings, seeÄ Chapter 6.6 ‘Playing and adapting songs’ on page 46.

For practising, the drum part of a song can be muted. During playback, therefore simply pressthe [PART MUTE] button. To unmute the drum track, press the [PART MUTE] button again. Formore information, see Ä Chapter 6.7 ‘Muting’ on page 54.

During song playback, the Click function can be turned on and off. The click speed can not bechanged in playback mode and depends basically on the tempo of the current song.

If you want to practice with click function only, press [CLICK] to turn it on or off. To adapttempo and time signature, see Ä Chapter 6.9 ‘Click functions’ on page 63.

The E-drum set consists of several pads that are assigned to at least one trigger point (orsimply trigger). Each trigger produces its own sound when being played, the so-called ‘Voice’.

Songs

Muting a drum part

Click

Pads, triggers and voices

Operation

MPS-600

23

The sound of a trigger can be produced by striking the pad or by keystroke on the drummodule ([HI-HAT], [CRASH], [TOM], [RIDE], [KICK], [SNARE]). When playing a trigger, the indicatorLED of the corresponding pad lights up on the drum module.

The trigger assignments of the pre-installed drum kits are fixed. However, it is possible toassign any sound you want to a trigger and to save changed preset kits as user kits with thenew settings. For more information about the various settings and functions see Ä ‘Patternfunction’ on page 32.

Operation

e-drum module

24

6.2 LCD display

1 Number of the current drum kit

2 Main display area (song, kit, menu name)

Operation

MPS-600

25

3 Function mode, menu

4 Kit index

5 Display area for song number, measure, beat and tempo

6 Button symbols

7 Time signature

6.3 Storing functions

The Electronic Drum Kit offers the opportunity to adapt all preset songs (1 ... 120, seeÄ Chapter 10.4 ‘Song list’ on page 118) and store them as user songs with a new name in thedevice. In addition, all songs from the device memory and all the global settings can be copiedto an SD card and songs from an SD card can be copied to the device memory. The variousoptions are described in detail in subsequent chapters.

Internal memory, SD card

Operation

e-drum module

26

The settings of the preset songs can be changed before and during playback. Anychange to the preset songs, however, is discarded when another song is selected orthe device is switched off. Modified preset songs and any other changes can always becreated as new user's songs using [SAVE/ENTER], see Ä ‘Storing songs’ on page 53.

6.4 Drum kits

A drum kit is a compilation in which each trigger is assigned to a certain sound and severalsound parameters. By selecting a drum kit, you can tailor the sound of your e-drum kit in sec‐onds to the desired style of music. In addition to the 20 preset drum kits (Ä Chapter 10.2 ‘Pre-installed drum kits’ on page 89), you can create, modify and store 59 individual user drum kits.

Operation

MPS-600

27

1. Press the [KIT] button.

ð The display shows the number and name of the currently selected drum kit.

2. Select the desired drum kit using the [+] / [–] buttons or the jog wheel. The selecteddrum kit is immediately active.

To change from the group of preset kits to the group of self-created drum kits use the[PAGE+] (jump to ‘MyKit001’ ) or [PAGE–] (jump to ‘Acoust-1’ ) buttons.

Selecting a drum kit

Operation

e-drum module

28

For each trigger of the drum kit, you can set the corresponding sound and several soundparameters.


ð The display shows the number and name of the currently selected drum kit, e.g.‘Acoust-1’ .

2. Select the desired drum kit using the [+] / [–] buttons or the jog wheel.

To change from the group of preset kits to the group of self-created drum kits use the[PAGE+] (jump to ‘MyKit001’ ) or [PAGE–] (jump to ‘Acoust-1’ ) buttons.

3. Press the [MENU] button.

ð The display shows the parameter ‘VOICE’ .

4. Press the [SAVE/ENTER] button.

5. Determine the trigger whose settings you want to change within the selected drum kit.Therefore press one of the pad select keys or simply hit the pad. To select a trigger that isassigned to the edge of a pad, press the [RIM] button in addition to the pad select key.To select the trigger of the closed hi-hat, press the [HI-HAT CONTROL] button in additionto the pad select key. The RIDE Bell, Half Open HIHAT, Half Open HIHAT R and SPLASHtriggers can not be selected by keystroke, but only by playing them (see alsoÄ Chapter 10.1 ‘Trigger and pads’ on page 86).

Modifying a drum kit

Operation

MPS-600

29

ð The indicator LED of the pad key lights up.

6. Change the displayed parameters as desired. For testing, press the corresponding padselect button or hit the pad.

To change from one parameter to the next use the [PAGE+] or [PAGE–]. Change the valueof the parameter using the [+] / [–] buttons or the jog wheel. The number of the setvalue (for example, the number of the sound) appears in the lower right corner of thedisplay in the ‘DATA’ field.

Parameter, display Description Value range

Grp Pad(s) assigned to the trigger KickBk, SnareBk, TomBk, RideBk, CrashBk, Hihat,Percusn, SFX, HH_Combi

Voc Voice assigned to the trigger 1…674 (Ä Chapter 10.3 ‘Voice list’ on page 91)

Volume Volume 0…127

Pan Trigger position within the stereo panorama L8…Centre…R8

Pitch Pitch –8…+8

Decay Decay –5…0

RvbLevel Reverb level 0…127

Operation

e-drum module

30


MidiNote MIDI note assigned to the trigger. If the currentvalue is already selected for another trigger, thedisplay shows ‘!’ and thereby recommends toselect another value.

See Ä Chapter 10.1 ‘Trigger and pads’ on page 86

Duration Length of the assigned MIDI note 0,0 s…0,8 s

StartVol Start volume 0…127

7. Press the [EXIT] button to exit the submenu.

8. Press the [SAVE/ENTER] button to save the modified settings and exit the menu.

Operation

MPS-600

31

Each trigger can be programmed so that when you hit the respective pad not just a singlesound is produced, but a complex pattern or a preset or user song is played. Up to seven padscan be programmed within a user kit for playing patterns / songs.


ð The display shows the numbers and the names of the currently selected drum kit,e.g. ‘Acoust-1’ .



3. Determine the trigger to which you want to program a specific pattern. Press one of thepad select keys or simply hit the pad. To select a trigger that is assigned to the edge of apad, press the [RIM] button in addition to the pad select key. To select the triggers thatare assigned to the closed hi-hat, press the [HI-HAT CONTROL] button in addition to thepad select key. The RIDE Bell, Half Open HIHAT, Half Open HIHAT R and SPLASH triggerscan not be selected by keystroke, but only by playing them (see also Ä Chapter 10.1‘Trigger and pads’ on page 86).

ð The pad select key LED lights up.

4. Press the [PAGE+] button.

ð The display shows the value ‘Pattern: OFF’ .

Pattern function

Operation

e-drum module

32

5. Press the [+] button to turn the pattern function on.

ð The value changes to ‘Pattern: ON’ . The pattern function is enabled for the selectedpad.


ð The display now shows the parameter ‘Grp:’ . Use the [+] / [–] buttons or the jogwheel to select the desired pattern or song group.

7. Press the[PAGE+] button.

ð The display now shows the parameter ‘Sng:’ . Use the [+] / [–] or the jog wheel toselect the desired pattern or song.

8. To select and modify the other parameter (see table below) use the [PAGE+] button. Usethe [+] / [–] buttons or the jog wheel to change the parameter value. The number of theset value appears in the lower right corner of the display in the ‘DATA’ field.


ð The display shows ‘Sv> MyKit001’ . Use the [+] / [–] buttons or the jog wheel to selectthe user kit that you want to save the settings with.


ð Now you can rename the kit or save it with its original name using the [SAVE/ENTER]button. ‘SAVE OK!’ will confirm the storing.

Operation

MPS-600

33


Grp Pattern or song group DrumLoop, 1shot, PercLoop, HIT, TAP, UserSong

Sng Pattern or song 1…220

Retrig Retrigger mode ST/SP, ReST

VelCtrl Adjustable touch sensitivity ON, OFF


X'Pose Transposing –12…12

RstTime Reset time OFF, 0.1…0.4 s (in steps of 0.1 s)

DrumVoc Drum voice ON, OFF

Operation

e-drum module

34

For the groups ‘DrumLoop’ and ‘1shot’, the parameter ‘RstTime’ is disabled (display‘–’ ).

For the group ‘TAP’, the parameter ‘Retrig’ is disabled (display ‘–’ ).

For the group ‘HIT’, the parameters ‘RstTime’ and ‘Retrig’ are disabled (display ‘–’ ).

When playing with adjustable touch sensitivity, the volume of each pad is controlledby touch intensity ( ‘VelCtrl ON’ ). If you set this parameter to ‘OFF’ , the volume of thispad is fixed via the ‘Volume’ parameter and can not be controlled by touch intensityduring playing.

Using ‘DrumVoc’ you can determine, wether the drum sound should synchronouslybe produce when playing a pad. When setting this parameter to ‘OFF’ , only the padpattern will sound on playing the pad. Set the parameter to ‘ON’ if you want to hearboth pad pattern and drum sound synchronously.

Operation

MPS-600

35

In Kit menu, you can change the order of the user kits as desired.


ð The display shows the number and name of the currently selected drum kit, e.g.‘Acoust-1’ . The current memory slot is indicated in the lower right area of the displayas ‘DATA xxx’ .

2. Use the [PAGE +] button to change to the user kit group and select the desired kit withthe [+] / [–] buttons or the jog wheel.



4. Press the [PAGE +] button twice to enter the EXCHANGE menu.

5. Use the [+] / [–] buttons or the jog wheel to select the desired list position.

6. Confirm the selection with [SAVE/ENTER].

ð The display briefly shows ‘EXCHANGE OK!’ . Then the original kit is displayed.

In Kit menu, you can rename the user kits as desired.

Changing the user kit order

Renaming user kits

Operation

e-drum module

36


ð The display shows the number and name of the currently selected drum kit, e.g.‘Acoust-1’ . The current memory slot is indicated in the lower right area of the displayas ‘DATA xxx’ .




4. Press the [PAGE +] button three times to enter the RENAME menu.


ð The first character of the kit name is highlighted and can be changed using the [+] /[–] buttons or the jog wheel. Use the [PAGE –] and [Page +] button to move thecursor to the next or previous position.

6. Confirm the change with [SAVE/ENTER].

ð The display briefly shows ‘SAVE OK!’ . Then the original kit is displayed with the newname.

Operation

MPS-600

37

With your drum set, you can use the existing preset kits as a basis for user kits. The user kits canthen be either stored in the device or on an SD card.

1. Use the [PAGE –] button to change to the preset kit group and select the desired kit withthe [+] / [–] buttons or the jog wheel.


ð The display shows ‘Sv>’ as well as the number and name of the first user kit, in fac‐tory default condition ‘MyKit001’ . The current memory slot is indicated in the lowerright area of the display as ‘DATA xxx’ .

3. Use the [+] / [–] buttons or the jog wheel to select that user kit, you want to assign set‐tings of a preset kit to.


ð The first character of the kit name is highlighted and can be changed using the [+] /[–] buttons or the jog wheel. Use the [PAGE –] and [Page +] button to move thecursor to the next or previous position.


ð The display briefly shows ‘SAVE OK!’ . Then the original kit is displayed with the newname and the new memory slot. The change of the presets take effect immediately.

Modifying and saving user kits

Operation

e-drum module

38

Any unsaved changes are discarded when selecting another kit or switching the unitoff.



ð The display shows ‘Sv>’ as well as the number and name of the first user kit, in fac‐tory default condition ‘MyKit001’ . The current memory slot is indicated in the lowerright area of the display as ‘DATA xxx’ .

3. Press the [PAGE +] button.

ð ‘CurKit > Card’ appears in the display. Select this option to save the current kit to theSD card. To save all user kits to the SD card, press [PAGE +] again. The option ‘ALLKits> Card’ appears in the display.

Saving on SD card

Operation

MPS-600

39


ð The first character of the kit name (or the group description, if all kits are stored) ishighlighted and can be changed using the [+] / [–] buttons or the jog wheel. Use the[PAGE –] and [Page +] button to move the cursor to the next or previous position.


ð The display briefly shows ‘SAVE OK!’ .

When saving to SD card, all data is automatically also saved internally in the unit. I.e.,if no data can be saved externally due to SD card malfunction ( ‘No card!’ , ‘Carderror!’ etc.), the data remain in the internal memory.

6.5 Mixer functions

Using the mixer, you can adjust the overall volume of a kit, the volume of the accompanimenttrack and the click volume.

Operation

e-drum module

40

1. Use the [+] / [–] buttons or the jog wheel to select the desired drum kit.

2. Press the [MIXER] button to open the MIXER menu.

ð The display shows the parameter ‘KITVol:’ and the number and current volume ofthe selected drum kit.

3. Set the volume with the [+] / [–] buttons or the jog wheel.

4. Press the [PAGE +] button again.

ð The display shows the parameter ‘SongVol:’ and the current volume of the accom‐paniment track.


6. Press the [PAGE +] button again.

ð The display shows the parameter ‘ClickVol:’ and the current click volume.


Operation

MPS-600

41

Press the [PAGE –] button to get to the previous parameter. Press [EXIT] to quit themenu.

To set the volume for each trigger of a kit, proceed as follows:

1. Use the [+] / [–] buttons or the jog wheel to select the desired drum kit.




ð The display shows the parameter ‘TrigVol:’ and the current volume of the selectedtrigger.

Setting the trigger volume

Operation

e-drum module

42

4. Determine the trigger whose volume should be adjusted. In order to do this, press oneof the pad select keys or simply hit the pad. To select a trigger that is associated with theedge of a pad, press the [RIM] button additionally to the pad select key. To select thetrigger of the closed hi-hat, press the [HI-HAT CONTROL] button additionally to the padselect key. The triggers RIDE Bell, Half Open HIHAT, Half Open HIHAT R and SPLASH cannot be selected by keystroke, but only by playing them (see also Ä Chapter 10.1 ‘Triggerand pads’ on page 86).

ð The pad select key LED lights up.

5. Use the [+] / [–] buttons or the jog wheel to select the desired volume.

6. Select the next trigger and adjust the volume as described.

7. Conclusively save the settings with [SAVE/ENTER].


Operation

MPS-600

43

To set the volume of each song track, proceed as follows:




ð The display shows the parameter ‘SongVol:’ and the current volume.


ð The display successively shows the various parameters (see the following table) andthe current volume.

4. Adjust the desired volume of a track using the [+] / [–] buttons or the jog wheel.

5. Use the [PAGE +] or [PAGE –] button to jump to the next or previous parameter.

6. Conclusively save the settings with [SAVE/ENTER].

Setting the song track volume

Operation

e-drum module

44



DrumVol Drum sound volume 0…127

PercVol Percussion sound volume 0…127

Part1Vol Volume track 1 0…127





Operation

MPS-600

45

6.6 Playing and adapting songs

Your digital drum set provides 220 memory slots in total for preset (1…120) and user songs(121…220). Each song consists of seven so-called parts (tracks) that can be mixed using asequencer. The ‘drum kit’ part plays the pad sound, the tracks ‘perc’, ‘part1’ are the backingparts and are reserved for the other instruments and/or voices.

1. Press the [SONG] button.

ð The display shows the name and number of the current song, the time signature,the current beat and the tempo.

2. Use the [+] / [–] buttons or the jog wheel to select the desired song. With the [PAGE +]and [PAGE –] buttons, you can directly jump from a song category to the first song of thenext category (for categories and songs, see Ä Chapter 10.4 ‘Song list’ on page 118.

Playing a song

Operation

e-drum module

46

1. Select the desired song as described and press the [PLAY/STOP] button to start playing.

ð The indicator LED of the button lights up.

2. To stop playback, press the [PLAY/STOP] button again.

ð The indicator LED of the button turns off.

If necessary, adapt the song volume to the kit volume, see Ä ‘Setting the song trackvolume’ on page 44.



ð The display shows the ‘SETUP’ menu.

Song playback

Playback settings

Operation

MPS-600

47


4. Press [PAGE +] or [PAGE –] to jump to the next or previous parameter (see followingtable).

5. Adjust the desired parameter value using the [+] / [–] buttons or the jog wheel.


Tempo Playback speed of the song is reset to originalvalue when another song is played.

30…280

T-Sig Preset songs: predefined value

User songs: standard 4/4

4/4

Mode Playback mode for songs in categories ‘loop’ (loopplayback) and ‘1 shot’ (single playback).

Loop, 1 Shot

Pre Count Pre-count function

This auxiliary function is available only for thesongs of the categories ‘Loop’ and ‘1 Shot’.

Off, 1 bar, 2 abrs

Operation

e-drum module

48


Kit Link Not supported in current software version.

TapSync Not supported in current software version.

All available parameters can be changed during playback. The changes are effectiveimmediately.

All preset songs consist of seven tracks in total, the so-called parts (drum part, percussion part,Part1…5). These parts can be adjusted as described below.


2. Select the desired song, see Ä ‘Playing a song’ on page 46.



Part settings

Operation

MPS-600

49


ð The display shows the ‘PART:’ menu.

5. Use the [+] / [–] buttons or the jog wheel to select the various parts successively.

n ‘Drum’ and ‘Perc’: Press the [SAVE/ENTER] button. Then you can use the [+] / [–] but‐tons or the jog wheel to assign a certain kit and adjust the volume and the reverbeffect. Press the [PAGE –] / [Page +] buttons to get to the next or previous parameter(see following table).

n ‘Part1…5‘: Press the [SAVE/ENTER] button. Then you can use the [+] and [–] buttonsor the jog wheel to assign a certain sound as well as the volume, balance and reverbeffect. Use the [PAGE –] / [Page +] buttons to get to the next of previous parameter(see following table).

6. Press the [SAVE/ENTER] button to save the adjustment. You can easily save user songsafter modifying with their original names. Preset songs with modified settings must besaved as user song. Therefore select the desired user song using the [+] / [–] buttons orthe jog wheel and rename it as described below.


ð The first song name character is highlighted and can be changed using the [+] / [–]buttons or the jog wheel. Press the [Page +] / [PAGE –] buttons you get to the next /previous digit.

Operation

e-drum module

50


ð The display briefly shows ‘SAVE OK!’ . Then the original song is displayed with its newname.


Kit Drum kit see Ä Chapter 10.3 ‘Voice list’ on page 91


Reverb Reverb effect 0…127

Voc Voice see Ä Chapter 10.3 ‘Voice list’ on page 91

Pan Right/left balance within stereo panorama L8…1 / Center / R1…8

Operation

MPS-600

51

All parameters can be changed during playback. The changes are effective immedi‐ately.

You can delete certain parts of user songs.


2. Select the desired user song, see Ä ‘Playing a song’ on page 46.



4. Press the [PAGE +] button twice.

ð The display shows the ‘ERASE:’ menu.

5. Use the [+] / [–] buttons or the jog wheel to select the part that you want to delete, orchoose die option [ERASE: ALL] if you want to delete all tracks.

Deleting parts

Operation

e-drum module

52


ð The display shows the confirmation prompt ‘Sure?’ .

7. Press [EXIT] to cancel or confirm with [SAVE/ENTER].

ð If you confirm, the display briefly shows ‘Erase OK!’ .

Preset songs can be modified and adapted during playback. These changes remain effectiveuntil another songs is selected or the unit is switched off. You can save modified preset songsfrom all menu levels as new user song.

1. Modify the desired settings as described in the respective chapter.


ð The display shows ‘Sv>’ and the number and name of the first user song, in factorydefault condition ‘MySng001’ . The current memory slot is indicated in the lowerright area of the display as ‘DATA xxx’ .



Storing songs

Operation

MPS-600

53



All songs stored in the unit can be copied to an SD card, see Ä Chapter 6.11 ‘SD card’on page 73.

6.7 Muting

Individual parts of song can be muted during playback. Select the desired song and start play‐back.

Operation

e-drum module

54

1. Press the [PART MUTE] button if you want to mute only the drum part of a song. Press the[PART MUTE] button again to unmute the part.

2. Press the buttons [MENU] and [PART MUTE] simultaneously to mute a certain part of asong.

ð The indicator LED of the [PART MUTE] flashes. The display shows ‘Mute:’ . Use the [+] /[–] buttons or the jog wheel to select the part to be muted.

3. Press the [PART MUTE] button.

ð The indicator LED of this button is lit, the Part is muted.

Use the [+] and [–] buttons or the jog wheel to mute another part during playback withoutinterruption. To unmute al parts, press the [PART MUTE] button again (indicator LED flashes).Press [EXIT] to cancel the function.

When playing back MIDI files, each of the 16 channels can be muted during playback.Muting MIDI channels

Operation

MPS-600

55

1. Press the [CARD] button and use the [+] / [–] buttons or the jog wheel to select thedesired song.

2. Press the [MENU] and [PART MUTE] buttons simultaneously.

ð The indicator LED of the [PART MUTE] flashes. The display shows ‘CH1: PLAY’ .

3. Use the [+] / [–] buttons or the jog wheel to select the channel that you want to bemuted.

4. Use the [+] and [–] buttons to switch between [MUTE] and [PLAY], to mute or unmute thechannel.

6.8 Record function

Use this function to instantly record a drum track without any pre-settings.

1. Press the buttons [REC] and [PART MUTE] simultaneously.

ð The click function is automatically turned on, the indicator LEDs of the buttons[CLICK], [REC] and [PLAY/STOP] are flashing. Recording starts along with your playing.The indicator LEDs of the buttons [REC] and [PLAY/STOP] are lit during recording.

Quick record

Operation

e-drum module

56

2. Press the [PLAY/STOP] button to stop and save the recording.

ð The display shows the first unused user song slot, in factory default condition‘MySng001’ .

3. If desired, use the [+] / [–] buttons or the jog wheel to select another user song (e.g., tooverwrite an existing song).

4. Press [SAVE/ENTER] to rename.




Operation

MPS-600

57

1. Select the preset song that you want to record a drum track to (see Ä ‘Playing a song’ on page 46.

2. Press the [REC] button.

ð The display shows the first unused user song slot, in factory default condition‘MySng001’

3. If desired, use the [+] / [–] buttons or the jog wheel to select another user song (e.g., tooverwrite an existing song).

4. Press [SAVE/ENTER] to rename.

ð The first song name character is highlighted and can be changed using the [+] / [–]buttons or the jog wheel. Press the [Page +] / [PAGE –] buttons to get to the next /previous digit.


ð The display briefly shows ‘SAVE OK!’ . As soon as the display turns off, the click starts.The indicator LEDs of the buttons [CLICK] and [REC] are flashing and the displayshows the ‘Part:’ .

6. Use the [+] / [–] buttons or the jog wheel to select the track that you want to overwrite(drum or percussion).

Record via preset songs

Operation

e-drum module

58

7. Start the recording with [PLAY/STOP].

ð The indicator LEDs of the buttons [REC] and [PLAY/STOP] light up during recording.

8. Stop the recording with [PLAY/STOP].

ð The indicator LEDs of the buttons [REC] and [PLAY/STOP] turn off. The recording issaved in the unit as a new user song with the previously entered name and it'sshown in the display. To play your new song just press the [PLAY/STOP] button.

You can use a MIDI keyboard or other MIDI devices to play or feed new songs into the memoryof the drum module.

1. Connect the MIDI device to the MIDI connections of the drum module.

2. Use the [+] / [–] buttons or the jog wheel to select a user song, that can be overwritten.

3. Press the [PLAY/STOP] button to start the recording.

ð Die MIDI channels 12…16 are automatically assigned to the parts 1…5.

4. Press the [PLAY/STOP] or [EXIT] button to stop the recording.

ð The indicator LEDs of the buttons [REC] and [PLAY/STOP] turn off and the drummodule automatically switches to the SONG mode.

5. Press the [PLAY/STOP] button to play the recording.

Recording new songs

Operation

MPS-600

59

6. To rename and save see Ä ‘Storing songs’ on page 53.

The recording can be paused and resumed at any time in any mode. To do so, pressthe [REC] button. The indicator LED of the button flashes as long as the recording ispaused and the display shows ‘Rehearsal’ .

The click sound is not being recorded. During recording, you can't adjust the clicktempo.

1. Press the [REC] button to open the menu for recording settings.

ð The display shows ‘Part: Drum’ . The indicator LEDs of the buttons [CLICK] and [REC]are flashing.

Settings

Operation

e-drum module

60

2. Use the [PAGE –/+] buttons to get to the next or previous parameter (see the followingtable).

ð The parameter setting can be changed with the buttons [+] and [–] or the jog wheel.

3. When all parameters are set, you can directly start the recording by pressing the[PLAY/STOP] button.

4. Save the recording as a new user song see Ä ‘Storing songs’ on page 53.


Part Recording track (Part) Drum, Perc

TimeSig Time signature 1…9/2, 1…9/4, 1…9/8, 1…9/16

Tempo Tempo 30…280

Operation

MPS-600

61


Mode Recording mode

The drum and percussion part can be overwritten(Overdub) or newly created (New).

Parts 1…5 are always overwritten.

New, Overdub

Loop Number of loops OFF, 1…99

Qntize Resolution of quantisation OFF, 1/8, 1/8t, 1/16, 1/16t, 1/32, 1/32t, 1/64

Sync-ST Synchron start CLICK OFF ([PLAY/STOP] flashing), ON ([PLAY/STOP] off)

Precount Pre-count function Off, 1 bar, 2 bars

When the MIDI channels 12…16 are already used, the correspondent tracks should berecorded to the parts 1…5.

Operation

e-drum module

62

Quantization always includes all parts. Always the starting point of a note will bequantize, but not its length.

6.9 Click functions

Press the [CLICK] button to turn the click function on or off. When the click is active, the indi‐cator LED of the button is flashing.

1. Press the buttons [MENU] and [CLICK] simultaneously to open the click settings menu.

ð The display shows ‘ClickVol:’ . The indicator LED of the [MENU] button lights up.

Settings

Operation

MPS-600

63

2. Use the buttons [PAGE –/+] to get to the next or previous parameter (see the followingtable).

ð The parameter setting can be changed with the [+] / [–] buttons or the jog wheel.

All changes are immediately effective. Quit the settings menu with [EXIT].


ClickVol Click volume 0…127

TimeSig 1st beat accent 0…9/2, 0…9/4, 0…9/8, 0…9/16

Inter Beat per bar ½, 3/8, 1/4, 1/8, 1/12, 1/16

Voc Click voice Voice, Metro, Claves, Sticks, Cowbell, Click

Operation

e-drum module

64

6.10 Utility menu

In the utility menu, you can adjust various device parameters within five submenus and resetall values to factory default condition.

1. Press the [UTILITY] button to open the menu.

ð The display shows ‘TRIGGER’ .

2. Use the [Page–/+] buttons to jump between the parameters (see the following chapters).

3. Press the [SAVE/ENTER] button to open the respective submenus.

ð On submenu level, you can change the settings using the [+] / [–] buttons or the jogwheel.

4. Press the [SAVE/ENTER] button to save the changes.

5. Press [EXIT] to return to the next higher level. To quit the menu press [EXIT].

Operation

MPS-600

65

6.10.1 Trigger adjustment

In the TRIGGER submenu, you can adjust the settings of all pads (for parameters see the fol‐lowing table). Activate the desired pad by playing it or pressing the respective button of thedrum module.


Sensitive Touch sensitivity 1…48

Thresh Threshold 0…120

Curve Trigger curve Normal, Exp1/2, Log1/2, Loud

Retrig_C Double trigger suppression 0…50

X-Talk Crosstalk 0…20

Scan-T Scan time for trigger signals 2…20 ms

Rjct-T Suppression time of the trigger 0…2 s

Mask-T Double trigger prevention 0,01…1,00 s

Operation

e-drum module

66


Rim-Sens Touch sensitivity of the Rim trigger 1…24

Splash-S Touch sensitivity of the Splash cymbal 20…200

The touch sensitivity regulates the volume response of a pad regardless of the actual touchintensity. The higher the value, the higher the volume when playing the pad, and vice versa.

The threshold determines at what touch intensity a trigger generates a sound. The higher thevalue, the less sensitive the trigger is to vibrations of the other Pads.

The trigger curve regulates the velocity, i.e. the ratio between touch intensity and resultingvolume. The ‘Normal’ setting stands for the most natural ratio between touch and volume. Inthe ‘Exp1/2’ setting, a strong hit on the pad achieves a bigger change. In the ‘Log1/2’ setting,an easy hit on the pad achieves a bigger change. If you choose the ‘Loud’ setting, the changein volume is smaller when changing the touch intensity. High volumes are achieved by a rela‐tively low touch intensity.

Sensitive

Thresh

Curve

Operation

MPS-600

67

If multiple sounds are generated in a row when playing a pad, this is called ‘double trigger‘.This effect can e.g. be caused by irregular waveforms, especially in trigger decay. With"Retrig_C", these distortions can be suppressed. The higher this value is set, the more likely it is,that hits in rapid succession - for example in a drum roll - are no longer detected. The valueshould therefore be set as low as possible.

When several pads are mounted on the same rack, vibrations may be transferred to other padsand thus, unwanted sounds are triggered when hitting a pad. This crosstalk can be preventedby a corresponding setting of the 'X-Talk' parameter. The value should be set as low as pos‐sible.

The slew rate of the trigger waveform varies due to construction type. That means, that thevolume may vary even given a uniform touch intensity. This effect can be suppressed with"Scan-T". The higher the value is set, the more precise the velocity is analysed. The valueshould be set as low as possible because it affects the release time of the trigger.

This parameter affects the suppression time, i.e. the response time of the trigger after playingit.

Retrig_C

X-Talk

Scan-T

Rjct-T

Operation

e-drum module

68

If multiple sounds are generated in a row when playing a pad, this is called ‘double trigger’.This effect can e.g. be caused by the rebound or by leaving the stick or mallet on the pad. With"T-Mask", a period is defined in which trigger hits are ignored. The higher this value is set, themore likely it is, that hits in rapid succession are not detected. The value should therefore beset as low as possible.

This parameter controls the touch sensitivity of the rim trigger (snare and toms).

This parameter controls the touch sensitivity of the Splash-trigger (hi-hat and splashes).

Mask-T

Rim-Sens

Splash-S

Operation

MPS-600

69

6.10.2 Reverb effect, equalizer

In the EFFECT submenu, you can turn the reverb effect and the equalizer on or off and makeadjustments (for parameters see table below).


Reverb Reverb effect on/off ON, OFF

RvbTyp Effect type SRoom, MRoom, LRoom, Hall1, Hall2, PLate, Delay,P.Delay

EQ Switch 4-band EQ on/off ON, OFF

EQ Low EQ frequency range bass –12…+12 dB

EQ L.Mid EQ frequency range lower mids –12…+12 dB

EQ H.Mid EQ frequency range upper mids –12…+12 dB

EQ High EQ frequency range treble –12…+12 dB

Operation

e-drum module

70

6.10.3 MIDI settings

In the MIDI SET submenu, you can adjust the settings for handling MIDI files (for parameterssee table below).

Parameter, display Description

Local ON: Output provides drum module and MIDI sound.

OFF: Drum module muted, only MIDI sound.

SoftThru ON: Looping MIDI input to MIDI output.

OFF: Internal MIDI data only.

GM Mode ON: Program change commands for MIDI channel no. 10 are processed as a ‘GM Kit’selection.

OFF: Program change commands for MIDI channel no. 10 are processed as a ‘local kit’selection.

Operation

MPS-600

71

6.10.4 Saving global settings

SAVE GLOBAL: Use this sub menu to save all user settings to an SD card.

6.10.5 Resetting to factory default settings

Use the RESET submenu to reset the device to the original factory settings (see followingtable).

Parameter, display Description

ResetPara Resetting of all changed parameter (Mixer, Utility, Trigger, Click etc.)

ResetAll Resetting of all changed parameter and the kit and song memory

Operation

e-drum module

72

6.11 SD card

With the SD card function of the drum module, you can play MIDI files directly from an SD card,load MIDI files from the card into the device memory, store user songs as MIDI files on a card(Ä ‘Saving on SD card’ on page 39) and save all device settings externally (Ä Chapter 6.10.4‘Saving global settings’ on page 72).

If there is no or an unsupported card in the SD card slot, the following note appears onthe display: ‘NO CARD!’ .

The drum module supports SD cards in FAT16 and FAT32 format and sizes of 16 MB to2 GB as well as the following file types: *.MID, *.KIT, *.SNG and *.SET. Before initialusing, the SD card should be formatted using the drum module.

Operation

MPS-600

73

If the selected folder does not contain any supported files, the following note appearson the display: ‘NO FILE!’ . To leave the folder, press [EXIT].

1. Insert the SD card with your MIDI files into the SD card slot of the drum module. Pressthe [CARD] button.

ð The indicator LED of the button lights up. The display shows the SD card menu.

2. Select the desired song. Use the +/– buttons or the jog wheel for navigation within thecard's directory structure. Open the respective folder using PAGE -/+. When the displayshows the desired song, press the PLAY/STOP button to start or stop the playback.

ð The display shows tempo and time signature of the song.

Playing MIDI files from an SDcard

Operation

e-drum module

74

In the CARD menu you can program the loop playback and pre-count function. Thedrum module supports SMF 0 and 1 (maximum of 32 tracks, up to 1024 pulses /quarter note). Files bigger than 542 KB are not supported.

You can load MIDI files with a size of up to 32 KB into the drum module. However, only SMF 1 issupported. A maximum of seven channels of the MIDI file are processed in user songs of thetype ‘1Shot‘ and ‘Loop’. With user songs of ‘TAP’ and ‘HIT’ type, only the first channel is pro‐cessed. The following table shows the available channels.

1. Insert the SD card with your MIDI files into the SD card slot of the drum module. Pressthe [CARD] button.


2. Select the desired directory using the [+] or [–] buttons or the jog wheel. Use[SAVE/ENTER] to change between the directory levels. When the display shows thedesired song, press [MENU.]

ð The display shows ‘LOAD’ .

Loading MIDI files from the SDcard

Operation

MPS-600

75

3. Press the [SAVE/ENTER] button, select the user song type (1Shot, Loop, TAP, HIT) with the[+] / [–] buttons or the jog wheel and confirm with [SAVE/ENTER].

ð The display shows the first unused user song, in factory default condition‘MySng001’ .

4. Use the [+] / [–] buttons or the jog wheel to select another user song, if desired.

5. To rename, press [SAVE/ENTER].

ð The first character of the song name is highlighted and can be changed using the[+] / [–] buttons or the jog wheel. Use the [PAGE –] and [Page +] button to move thecursor to the next or previous position.

Operation

e-drum module

76

6. To save and overwrite an existing user song confirm the confirmation prompt‘Overwrite?’ with [SAVE/ENTER].

ð The display briefly shows ‘Song loaded’ .

MIDI channel Part

10 Drum

11 Percussion

12 Part 1

13 Part 2

14 Part 3

15 Part 4

16 Part 5

Operation

MPS-600

77

If you want to use an internal kit, controller 0 must be set to ‘127’. Otherwise a GM kitis used.

If you load a MIDI file into an existing user song, the original song is deleted, althoughthe display shows ‘No space’ !

1. Press the [CARD] button.


2. Press the [PART MUTE] button.

3. Use the [+] / [–] buttons or the jog wheel to select the MIDI channel that you want tomute.

4. Confirm the selection with [SAVE/ENTER].

Muting a MIDI channel

Operation

e-drum module

78

1. Press the [CARD] button.


2. Use the [+] / [–] buttons or the jog wheel to select the desired file. Press [SAVE/ENTER] tochange between the directory levels.

3. Use the [+] / [–] buttons or the jog wheel to select the option ‘Delete’ and press[SAVE/ENTER].

4. Confirm the confirmation prompt ‘Delete File?’ with [SAVE/ENTER]. Press [EXIT] to cancel.

ð After deleting, the display shows the last directory. If the directory does not containany more supported files the display shows ‘No File!’ .

1. Insert your SD card into the SD card slot of the drum module. Press the [CARD] button.


2. Use the [+] / [–] buttons or the jog wheel to select the option ‘Format’ and press[SAVE/ENTER].

Deleting MIDI files

Formatting the SD card

Operation

MPS-600

79

3. Confirm the confirmation prompt ‘Format card?’ with [SAVE/ENTER]. Press [EXIT] tocancel.

Formatting the SD card will erase all data on the card irretrievably!

Error message Explanation

No Card No card inserted, card not readable

Card Locked Card is write protected

Card Error Write / read error

FS Error Unsupported file system

NoUsableData MIDI not readable

Error messages

Operation

e-drum module

80

Error message Explanation

FileError File error

FileTooBig MIDI file exceeds 32 KB

No space Memory overflow

Operation

MPS-600

81

7 Technical specifications

Number of voices 674 (drums, percussion, SFX, …) plus 18 hi-hat combinations

Drum–kits 40 preset kits

59 user kits

Sequencer 120 preset songs

100 user-defined songs

7 song parts (drums, percussion, part 1…part 5)

Play modes: One shot, loop, tap, hit

Tempo: 30…280

Resolution: 192 ticks per quarter note

Metronome function

Part muting

Connections Headphones (1/4" phone socket)

Technical specifications

e-drum module

82

USB MIDI

MIDI IN/OUT

AUX IN/OUT (1/4" phone socket)

3 × tom pads

1 × floor tom pad

1 × snare pad

1 × kick pad

2 × crash pads

1 × hi-hat

Operating voltage supply Power adapter (DC 9 V )

Technical specifications

MPS-600

83

8 Cleaning

Clean the accessible parts of the device regularly. The frequency of cleaning depends on theoperating environment: moist, smoky or particularly dirty environments may cause a higheraccumulation of dirt on the components of the device.

n Use a dry soft cloth for cleaning.n Remove stubborn stains with a slightly damp cloth.n Never use cleaners containing alcohol or thinner.n Never put any vinyl items on the device, as vinyl can stick to the surface or lead to its disco‐

louration.

Device parts

Cleaning

e-drum module

84

9 Protecting the environment

For the transport and protective packaging, environmentally friendly materials have beenchosen that can be supplied to normal recycling.

Ensure that plastic bags, packaging, etc. are properly disposed of.

Do not just dispose of these materials with your normal household waste, but make sure thatthey are collected for recycling. Please follow the notes and markings on the packaging.

This product is subject to the European Waste Electrical and Electronic Equipment Directive(WEEE). Do not dispose with your normal household waste.

Dispose of this device through an approved waste disposal firm or through your local wastefacility. When discarding the device, comply with the rules and regulations that apply in yourcountry. If in doubt, consult your local waste disposal facility.

Disposal of the packaging mate‐rial

Disposal of your old device

Protecting the environment

MPS-600

85

10 Appendix

10.1 Trigger and pads

The table below shows the assignment of the triggers and pads available.

Trigger Pad Description MIDI note(standard)

1 1 KICK 36

2 2 SNARE 38

3 SNARE R 40

4 3 TOM1 48

5 TOM1 R 50

6 4 TOM2 45

7 TOM2 R 47

Appendix

e-drum module

86


8 5 TOM3 43

9 TOM3 R 58

10 6 TOM4 41

11 TOM4 R 39

12 7 RIDE 51

13 RIDE R 59

14 RIDE Bell 53

15 8 CRASH1 49

16 CRASH1 R 55

17 9 CRASH2 57

18 CRASH2 R 52

19 10 O HIHAT 46

Appendix

MPS-600

87


20 O HIHAT R 26

21 Half Open HIHAT 23

22 Half Open HIHAT R 24

23 C HIHAT 42

24 C HIHAT R 22

25 CTRL P HIHAT 44

26 Splash 21

Appendix

e-drum module

88

10.2 Pre-installed drum kits

The table below shows the numbers and names of the pre-installed drum kits.

No. Name No. Name

1 Acoust-1 10 Rock

2 FunkBand 11 PopRock

3 Pwrbd 12 Jazz

4 Std-2 13 Brush

5 Acoust-2 14 Songo

6 Fusion 15 1971's

7 Camco 16 Timbals

8 JzBrush 17 O school

9 Room 18 Tr606

Appendix

MPS-600

89

No. Name No. Name

19 Disco 30 Step

20 909 31 Industry

21 DrumBass 32 Lowfi

22 Funk 33 Metal

23 HipHop-1 34 Electron

24 HipHop-2 35 JzLatin

25 House-1 36 Noise

26 House-2 37 Std-1

27 Vintage 38 R&B

28 Junkyard 39 Magic

29 M-box 40 Teckno

Appendix

e-drum module

90

10.3 Voice list

No. Display Full name No. Display Full name

1 StdBd1 Standard Kick 1 11 JazzBd2 Jazz Kick 2

2 StdBd2 Standard Kick 2 12 BandBd1 Big Band Kick 1

3 ClascBd1 Classic Kick 1 13 BandBd2 Big Band Kick 2

4 ClascBd2 Classic Kick 2 14 CamcoBd1 Camco Kick 1

5 RockBd1 Rock Kick 1 15 CamcoBd2 Camco Kick 2

6 RockBd2 Rock Kick 2 16 FunkBd1 Funk Kick 1

7 RockBd3 Rock Kick 3 17 FunkBd2 Funk Kick 2

8 RoomBd1 Room Kick 1 18 FunkBd3 Funk Kick 3

9 RoomBd2 Room Kick 2 19 HipopBd1 Hiphop Kick 1

10 JazzBd1 Jazz Kick 1 20 HipopBd2 Hiphop Kick 2

Appendix

MPS-600

91


21 HipopBd3 Hiphop Kick 3 34 AcBd6 Acoust Kick 6

22 HipopBd4 Hiphop Kick 4 35 AcBd7 Acoust Kick 7

23 1969Bd 1969 Kick 36 AcBd8 Acoust Kick 8



26 PwrBd Pwrbd Kick 39 AcBd12 Acoust Kick 12

27 R&B BdR&B Kick 40 AcBd13 Acoust Kick 13

28 VoiceBd Voice Kick 41 AcBd15 Acoust Kick 15

29 AcBd1 Acoust Kick 1 42 AcBd16 Acoust Kick 16





Appendix

e-drum module

92


47 AcBd22 Acoust Kick 22 60 TechBd Techno Kick

48 AcBd23 Acoust Kick 23 61 DrBsBd Drum Bass Kick

49 AcBd24 Acoust Kick 24 62 JunkydBd Junkyard Kick

50 AcBd26 Acoust Kick 26 63 NoiseBd Noise Kick

51 AcBd27 Acoust Kick 27 64 IndBd Industry

52 AcBd28 Acoust Kick 28 65 LowfiBd Lowfi Kick

53 AcBd29 Acoust Kick 29 66 DiscoBd Disco Kick

54 AcBd30 Acoust Kick 30 67 808Bd 808 Kick

55 HouseBd1 House Kick 1 68 909Bd 909 Kick

56 HouseBd2 House Kick 2 69 ElBd1 Electron Kick 1



59 StepBd Step Kick 72 ElBd4 Electron Kick 4

Appendix

MPS-600

93


73 ElBd5 Electron Kick 5 86 ElBd18 Electron Kick 18

74 ElBd6 Electron Kick 6 87 ClasSn1 Classic Snare 1

75 ElBd7 Electron Kick 7 88 ClasSnR1 Classic Snare Rim 1

76 ElBd8 Electron Kick 8 89 ClasSn2 Classic Snare 2

77 ElBd9 Electron Kick 9 90 ClasSnR2 Classic Snare Rim 2

78 ElBd10 Electron Kick 10 91 AcSn Acoust Snare

79 ElBd11 Electron Kick 11 92 AcSnR Acoust Snare Rim

80 ElBd12 Electron Kick 12 93 StdSn1 Standard Snare 1

81 ElBd13 Electron Kick 13 94 StdSnR1 Standard Snare Rim 1


83 ElBd15 Electron Kick 15 96 StdSnR2 Standard Snare Rim 2


85 ElBd17 Electron Kick 17 98 RockSn1 Rock Snare 1

Appendix

e-drum module

94


99 RockSnR1 Rock Snare Rim 1 112 CamoSnR Camco Snare Rim

100 RockSn2 Rock Snare 2 113 BrushSn1 Brush Snare 1

101 RockSn3 Rock Snare 3 114 BrushSn2 Brush Snare 2

102 RoomSn1 Room Snare 1 115 BrushSnR Brush Snare Rim

103 RoomSn2 Room Snare 2 116 FunkSn1 Funk Snare 1

104 RoomSn3 Room Snare 3 117 FkStick Funk Stick

105 JazzSn1 Jazz Snare 1 118 FunkSn Funk Band Snare

106 JazzSnR1 Jazz Snare Rim 1 119 FunkSnR Funk Band Snare Rim

107 JazzSn2 Jazz Snare 2 120 FunkSnS Funk Band Snare Stick

108 JazzSnR3 Jazz Snare Rim 3 121 FusionSn Fusion Snare

109 JzLtSn Jazz latin Snare 122 FusnSnS Fusion Snare Stick

110 BigBdSn Big Band Snare 123 SnareS Snare Stick

111 CamoSn Camco Snare 124 PwrSn Pwrbd Snare

Appendix

MPS-600

95


125 RingoSn Ringo Snare 138 1976SnR R1976 Snare Rim

126 RingoSn Ringo Snare Rim 139 R&BSn R&B Snare

127 HipopSnl Hiphop Snare 1 140 R&BSnS R&B Snare Stick

128 HipopSn2 Hiphop Snare 2 141 LowfiSn Lowfi Snare

129 506Sn1 506 Snare 1 142 LowfiSnS SLowfi Snare Stick

130 506SnR1 506 Snare Rim 1 143 VoiceSn voices Snare

131 506Sn2 506 Snare 2 144 VoiceSnR voices Snare Rim

132 506SnR3 506 Snare Rim 3 145 AcSn1 Acoust Snare 1

133 1969Sn 1969 Snare 146 AcSn2 Acoust Snare 2

134 1969SnR 1969 Snare Rim 147 AcSn3 Acoust Snare 3


136 1971SnR R1971 Snare Rim 149 AcSn5 Acoust Snare 5


Appendix

e-drum module

96


151 AcSn7 Acoust Snare 7 164 DrBsSn2 Drum Bass Snare 2

152 HouseSn1 House Snare 1 165 JySn Junkyard Snare

153 HouseSn2 House Snare 2 166 JySnS Junkyard Snare Stick

154 HouseSn3 House Snare 3 167 Noise SnNoise Snare

155 StepSn Step Snare 168 606Sn TR606 Snare

156 StepSnS Step Snare Stick 169 ElSn1 Electronic Snare 1

157 TechSn1 Techno Snare 1 170 ElSn2 Electronic Snare 2

158 TechSn2 Techno Snare 2 171 ElSn3 Electronic Snare 3

159 808Sn 808 Snare 172 ElSn4 Electronic Snare 4

160 909Sn 909 Snare 173 ElSn5 Electronic Snare 5

161 InSn Industry Snare 174 ElSn6 Electronic Snare 6

162 InSnS Industry Snare Stick 175 ElSn7 Electronic Snare 7

163 DrBsSn1 Drum Bass Snare 1 176 ElSn9 Electronic Snare 9

Appendix

MPS-600

97


177 ElSn10 Electronic Snare 10 190 ElSn24 Electronic Snare 24












189 ElSn23 Electronic Snare 23 202 ClsTm1a Classic Tom 1 a

Appendix

e-drum module

98


203 ClsTmR1a Classic Tom Rim 1 a 216 ClsTm2b Classic Tom 2 b

204 ClsTm2a Classic Tom 2 a 217 ClsTmR2b Classic Tom Rim 2 b


206 ClsTmR3a Classic Tom 3 a 219 ClsTmR3b Classic Tom Rim 3 b







213 ClsTmR6a Classic Tom Rim 6 a 226 CamcoTm1 Camco Tom 1

214 ClsTm1b Classic Tom 1 b 227 CamcoTm2 Camco Tom 2

215 ClsTmR1b Classic Tom Rim 1 b 228 CamcoTm3 Camco Tom 3

Appendix

MPS-600

99


229 CamcoTm4 Camco Tom 4 242 AcTm6 Acoust Tom 6

230 CamcoTm5 Camco Tom 5 243 AcTmR6 Acoust Tom Rim 6

231 CamcoTm6 Camco Tom 6 244 StdTm1 Standard Tom 1

232 AcTm1 Acoust Tom 1 245 StdTm2 Standard Tom 2

233 AcTmR1 Acoust Tom Rim 1 246 StdTm3 Standard Tom 3


235 AcTmR2 Acoust Tom Rim 2 248 StdTm5 Standard Tom 5


237 AcTmR3 Acoust Tom Rim 3 250 RockTm1 Rock Tom 1

238 AcTm4 Acoust Tom 4 251 RockTm2 Rock Tom 2


240 AcTm5 Acoust Tom 5 253 RockTm4 Rock Tom 4


Appendix

e-drum module

100


255 RockTm6 Rock Tom 6 268 FusnTm3 Fusion Tom 3

256 RoomTm1 Room Tom 1 269 1969Tm1 1969 Tom 1






262 Timpani Timpani 275 1976Tm1 1976 Tom 1

263 FunkTm1 Funk Tom 1 276 1976Tm2 1976 Tom 2

264 FunkTm2 Funk Tom 2 277 1976Tm3 1976 Tom 3

265 FunkTm3 Funk Tom 3 278 HiphpTm1 Hiphop Tom 1

266 FusnTm1 Fusion Tom 1 279 HiphpTm2 Hiphop Tom 2

267 FusnTm2 Fusion Tom 2 280 HiphpTm3 Hiphop Tom 3

Appendix

MPS-600

101


281 HiphpTm4 Hiphop Tom 4 294 BshTm2a Brush Tom 2 a



284 JazzTm1a Jazz Tom 1 a 297 BshTm5a Brush Tom 5 a

285 JazzTm2a Jazz Tom 2 a 298 BshTm6a Brush Tom 6 a

286 JazzTm3a Jazz Tom 3 a 299 BshTm1b Brush Tom 1 b

287 JazzTm1b Jazz Tom 1 b 300 BshTmR1b Brush Tom Rim 1 b

288 JazzTm2b Jazz Tom 2 b 301 BshTm2b Brush Tom 2 b





293 BshTm1a Brush Tom 1 a 306 BshTmR4b Brush Tom Rim 4 b

Appendix

e-drum module

102


307 BshTm5b Brush Tom 5 b 320 808Tm3 808 Tom 3

308 BshTmR5b Brush Tom Rim 5 b 321 808Tm4 808 Tom 4

309 BshTm6b Brush Tom 6 b 322 808Tm5 808 Tom 5

310 BshTmR6b Brush Tom Rim 6 b 323 808Tm6 808 Tom 6

311 TomRim Tom Rim 324 ElTm1 Electronic Tom 1

312 606Tm1 TR606 Tom 1 325 ElTm2 Electronic Tom 2





317 606Tm6 TR606 Tom 6 330 StepTm1 Step Tom 1

318 808Tm1 808 Tom 1 331 StepTm2 Step Tom 2

319 808Tm2 808 Tom 2 332 StepTm3 Step Tom 3

Appendix

MPS-600

103


333 909Tm1 909 Tom 1 346 lndTm2 Industry Tom 2

334 909Tm2 909 Tom 2 347 lndTm3 Industry Tom 3

335 909Tm3 909 Tom 3 348 Std20Rd Standard 20" Ride

336 JyTm1 Junkyard Tom 1 349 Std22Rd Standard 22" Ride

337 JyTm2 Junkyard Tom 2 350 StdRdBl Standard Ride Bell

338 JyTm3 Junkyard Tom 3 351 RockRd Rock Ride

339 NoiseTm1 Noise Tom 1 352 RockBl Rock Bell

340 NoiseTm2 Noise Tom 2 353 DryRdBl Dry Ride Bell

341 NoiseTm3 Noise Tom 3 354 VintgRd Vintage Ride

342 VoiceTm1 Voices Tom 1 355 60'sRd 60's Ride

343 VoiceTm2 Voices Tom 2 356 ClnPopRd Clean Pop Ride

344 VoiceTm3 Voices Tom 3 357 PopRdBl Clean Pop Ride Bell

345 IndTm1 Industry Tom 1 358 LightRd Light Flat Ride

Appendix

e-drum module

104


359 FlatRd Flat Ride 372 MuteRdBl Mute Ride Bell

360 TechRd1 Techno Ride 1 373 RideEg1 Ride Edge 1

361 TechRd2 Techno Ride 2 374 RideEg2 Ride Edge 2

362 JyBreak Junkyard Break 375 60'sRdR 60's Ride Rim

363 JyMetal Junkyard Metal 376 ClPopRdR Clean Pop Ride Rim

364 ClsRd Classic Ride 377 SkyRdR Sky Ride Rim

365 ClsRdBl Classic Ride Bell 378 ClsCrBl1 Classic Crash Bell 1

366 AcRd Acoustic Ride 379 ClsCrBl2 Classic Crash Bell 2

367 AcRdBl Acoustic Ride Bell 380 StdCr1 Standard Crash 1

368 JazzRd Jazz Ride 381 ClsChina Class China

369 JazzRdBl Jazz Ride Bell 382 StdCr2 Standard Crash 2

370 BrshRd Brush Ride 383 StdCrBl1 Standard Crash Bell 1

371 BrshRdBl Brush Ride Bell 384 StdCrBl2 Standard Crash Bell 2

Appendix

MPS-600

105


385 China1 China 1 398 CryCrBl Crystal Crash Bell

386 ClsCr1 Classic Crash 1 399 China2 China 2

387 ClsCr2 Classic Crash 2 400 ChinaLow China Low

388 ClsCr3 Classic Crash 3 401 OrHit1 Orchestra Hit 1

389 ClsCr4 Classic Crash 4 402 OrHit2 Orchestra Hit 2

390 Splash Splash 403 OrHitBl Orchestra Hit Bell

391 SplashBl Splash Bell 404 DrBsCr1 Drum Bass Crash 1

392 RockCr Rock Crash 405 DrBsCr2 Drum Bass Crash 2

393 RkSplash Rock Splash 406 China3 China 3

394 JzSplash Jazz Splash 407 606Cr1 TR 606 Cymbal 1

395 JzSpBl Jazz Splash Bell 408 606Cr2 TR 606 Cymbal 2

396 BshCr Brush Crash 409 808Cr1 TR 808 Cymbal 1

397 CrystlCr Crystal Crash 410 808Cr2 TR 808 Cymbal 2

Appendix

e-drum module

106


411 909Cr1 TR 909 Cymbal 1 424 StdHOpRB Standard HH Open Rim B

412 909Cr2 TR 909 Cymbal 2 425 RockHOp Rock HH Open

413 JyCr1 Junkyard Cymbal 1 426 PopHOp Pop HH Open

414 JyCr2 Junkyard Cymbal 2 427 PopHOpR Pop HH Open Rim

415 EfCr1 Cymbal Effect 1 428 BrshHOp Brush HH Open

416 EfCr2 Cymbal Effect 2 429 60'sHOp 60's HH Open

417 LaserRay Laser Ray 430 MiniHOp Mini HH Open

418 DriveBy Drive By 431 MiniHOpR Mini HH Open Rim

419 IndShort Industrial Short 432 ClsHOpA Classic HH Open A

420 IndLong Industrial Long 433 ClsHOpB Classic HH Open B

421 StdHatsI Standard Hats 1 434 CamcoHOp Camco HH Open

422 StdHats2 Standard Hats 2 435 VoiceHOp Voice HH Open

423 StdHOpB OpenStandard HH B 436 HouseHOp House HH Open

Appendix

MPS-600

107


437 606HOp TR 606 HH Open 450 MiniHfR Mini HH Half Rim

438 808HOp TR 808 HH Open 451 ClsHfRA Classic HH Half Rim a

439 909HOp TR 909 HH Open 452 ClsHfRB Classic HH Half Rim B

440 JyHOp Junkyard HH Open 453 CamHfOp Camco HH Half Open

441 NoiseHOp Noise HH Open 454 JyHfR Junkyard HH Half Rim

442 BassHOp Bass HH Open 455 StdHCsA Standard HH Close A

443 StdHfOp Standard HH Half Open 456 StdHCsB Standard HH Close B

444 RockHfOp Rock HH Half Open 457 RockHCs Rock HH Close

445 PopHfOp Pop HH Half Open 458 PopHCs Pop HH Close

446 PopHfR Pop HH Half Rim 459 PopHCsR Pop HH Close Rim

447 BrshHfOp Brush HH Half Open 460 BrshHCs Brush HH Close

448 60'sHfOp 60's HH Half Open 461 60'sHCs 60's HH Close

449 MiniHfOp Mini HH Half Open 462 MiniHCs Mini HH Close

Appendix

e-drum module

108


463 MiniHCsR Mini HH Close Rim 476 StdHPdA Standard HH Pad A

464 ClsHCsA Classic HH Close A 477 StdHPdB Standard HH Pad B

465 ClsHCsB Classic HH Close B 478 RockHPd Rock HH Pad

466 ClsHCsRB Classic HH Close Rim B 479 PopHpd Pop HH Pad

467 CamcoHCs Camco HH Close 480 BrshHPd Brush HH Pad

468 VoiceHCs Voices HH Close 481 60'sHPd 60's HH Pad

469 HouseHCs House HH Close 482 MiniHPd Mini HH Pad

470 606HCs TR 606 HH Close 483 ClsHPdA Classic HH Pad A

471 808HCs TR 808 HH Close 484 ClsHPdB Classic HH Pad B

472 909HCs TR 909 HH Close 485 CamcoHPd Camco HH Pad

473 JyHCs Junkyard HH Close 486 VoiceHPd Voices HH Pad

474 NoiceHCs Noices HH Close 487 HouseHPd House HH Pad

475 BrshHCs Bass HH Close 488 606HPd TR 606 HH Pad

Appendix

MPS-600

109


489 808HPd TR 808 HH Pad 502 ScratchP ScratchPush

490 JyHPd Junkyard HH Pad 503 DJ Efx DJEFX

491 NoiceHPd Noices HH Pad 504 HiQZap HiQZap

492 BrshHPd Bass HH Pad 505 DingBl DingBell

493 Splashed Splashed 506 FingeSnp FingerSnaps

494 PopSPd Pop Splashed 507 StdClap StandardClap

495 MiniSPd Mini Splashed 508 Tambour Tambourine

496 ClsSPdA Classic Splashed A 509 Vibraslp Vibraslap

497 ClsSPdB Classic Splashed b 510 AgogoLo AgogoLow

498 Mute Mute 511 AgogoHi AgogoHigh

499 MetronBl MetronomeBell 512 BellTree BellTree

500 MetronCl MetronomeClick 513 BongoHi BongoHigh

501 Scratch Scratch 514 BongoLo BongoLow

Appendix

e-drum module

110


515 Shaker Shaker 528 SlpTbl Slap Tabla

516 CgslpLo Conga SlapLow 529 MuTblslp Mute Tablaslap

517 CgslpHi Conga Slap High 530 Cabasa Cabasa

518 ElectCgL Elect Conga Low 531 Maracas Maracas

519 OpCga Open Conga 532 Whistle Short Whistle

520 Cgaslp Conga Slap 533 GuiroS Guiro Short

521 CowBl Cow bell 534 GuiroL Guiro Long

522 TimbHi Tim bale Hi 535 Claves Claves

523 TimbLo Tim bale Low 536 Woodbk Wood block

524 TimpHi Tim pani High 537 CuicaMut Cuica Muted

525 TimpLo Tim pani Low 538 CuicaOp Cuica Open

526 OpTblHi Open Tabla High 539 TriaMut Triangle Muted

527 OpTblLo Open Tabla Low 540 TriaOp Triangle Open

Appendix

MPS-600

111


541 SleighBl Sleigh Bells 554 Cowbell8 Cowbell 8

542 WindCh WindChimes 555 Cowbell9 Cowbell 9

543 Castanet Castanets 556 Cowbell10 Cowbell 10

544 SurdoMut SurdoMuted 557 Cowbell11 Cowbell 11

545 SurdoOpn SurdoOpen 558 Tabla1 Tabla 001

546 LotusDrm LotusDrum 559 Tabla2 Tabla 002

547 Cowbell1 Cowbell 1 560 Tabla3 Tabla 003




551 Cowbell5 Cowbell 5 564 FX1 FX 1



Appendix

e-drum module

112


567 FX4 FX 4 580 FX17 FX 17

568 FX5 FX 5 581 FX18 FX 18

569 FX6 FX 6 582 FX19 FX 19

570 FX7 FX 7 583 FX20 FX 20

571 FX8 FX 8 584 FX21 FX 21

572 FX9 FX 9 585 FX22 FX 22

573 FX10 FX 10 586 FX23 FX 23

574 FX11 FX 11 587 FX24 FX 24

575 FX12 FX 12 588 FX25 FX 25

576 FX13 FX 13 589 FX26 FX 26

577 FX14 FX 14 590 FX27 FX 27

578 FX15 FX 15 591 FX28 FX 28

579 FX16 FX 16 592 FX29 FX 29

Appendix

MPS-600

113


593 FX30 FX 30 606 FX43 FX 43

594 FX31 FX 31 607 FX44 FX 44

595 FX32 FX 32 608 FX45 FX 45

596 FX33 FX 33 609 FX46 FX 46

597 FX34 FX 34 610 FX47 FX 47

598 FX35 FX 35 611 FX48 FX 48

599 FX36 FX 36 612 FX49 FX 49

600 FX37 FX 37 613 FX50 FX 50

601 FX38 FX 38 614 FX51 FX 51

602 FX39 FX 39 615 FX52 FX 52

603 FX40 FX 40 616 FX53 FX 53

604 FX41 FX 41 617 FX54 FX 54

605 FX42 FX 42 618 FX55 FX 55

Appendix

e-drum module

114


619 FX56 FX 56 632 FX69 FX 69

620 FX57 FX 57 633 FX70 FX 70

621 FX58 FX 58 634 DJ1 DJ 001

622 FX59 FX 59 635 DJ2 DJ 002

623 FX60 FX 60 636 DJ3 DJ 003

624 FX61 FX 61 637 DJ4 DJ 004

625 FX62 FX 62 638 DJ5 DJ 005

626 FX63 FX 63 639 DJ6 DJ 006

627 FX64 FX 64 640 DJ7 DJ 007

628 FX65 FX 65 641 DJ8 DJ 008

629 FX66 FX 66 642 DJ9 DJ 009

630 FX67 FX 67 643 DJ10 DJ 010

631 FX68 FX 68 644 Fx1 Fx001

Appendix

MPS-600

115


645 Fx2 Fx002 658 Fx15 Fx015

646 Fx3 Fx003 659 Fx16 Fx016

647 Fx4 Fx004 660 Fx17 Fx017

648 Fx5 Fx005 661 One One

649 Fx6 Fx006 662 Two Two

650 Fx7 Fx007 663 Three Three

651 Fx8 Fx008 664 Four Four

652 Fx9 Fx009 665 Five Five

653 Fx10 Fx010 666 Six Six

654 Fx11 Fx011 667 Seven Seven

655 Fx12 Fx012 668 Eight Eight

656 Fx13 Fx013 669 Nine Nine

657 Fx14 Fx014 670 Ti Ti

Appendix

e-drum module

116


671 Ta Ta 682 ClassicA Classic A

672 Ei Ei 683 ClassicB Classic B

673 An An 684 Jazz Jazz

674 E E 685 Prog Prog

675 StandrdA Standrd A 686 Voice Voice

676 StandrdB Standrd B 687 House House

677 Rock Rock 688 808 808

678 Pop Pop 689 909 909

679 Brush Brush 690 Junk Junk

680 Vintage Vintage 691 Dirty Dirty

681 Mini Mini 692 Bass Bass

Appendix

MPS-600

117

10.4 Song list


Pattern loop

1 Fusion1 Fusion 1 11 BigBand1 Big Band 1

2 Hiphop Hiphop 12 D N'B1 Drum N'Bass 1

3 16BT Pop 16 Beat Pop 13 Ballad1 Ballad 1

4 Dance1 Dance 1 14 Swing1 Swing 1

5 LtinDan1 Latin Dance 1 15 Pop1 Pop 1

6 Rock1 Rock 1 16 Funk2 Funk 2

7 Ltin Jz1 Latin Jazz 1 17 Ltin Jz2 Latin Jazz 2

8 Funk1 Funk 1 18 Pop Fuk1 Pop Funk 1

9 LtinPop1 Latin Pop 1 19 Ltin Rk1 Latin Rock 1

10 60'sRock 60's Rock 20 BigBand2 Big Band 2

Appendix

e-drum module

118


Pattern loop

21 Pop Bald Pop Ballad 33 Ltin Jz3 Latin Jazz 3

22 Pop Fuk2 Pop Funk 2 34 LtinPop2 Latin Pop 2

23 3/4 Jazz 3/4 Jazz 35 Reggae1 Reggae 1

24 Pop Bosa Pop Bossa 36 Fusion3 Fusion 3

25 Samba1 Samba 1 37 Swing2 Swing 2

26 6/8Bald1 6/8 Ballad 1 38 Pop Shuf Pop Shuffle

27 Fusion2 Fusion 2 39 Ballad2 Ballad 2

28 Jazz1 Jazz 1 40 Piano Rk Piano Rock

29 Gtr Bosa Guitar Bossa 41 Blues1 Blues 1

30 BreakBt1 Break Beat 1 42 R&B1 R&B 1

31 World1 World 1 43 Funk4 Funk 4

32 Funk3 Funk 3 44 Mambo Mambo

Appendix

MPS-600

119


Pattern loop

45 LtinDan2 Latin Dance 2 57 Dance2 Dance 2

46 D N'B2 Drum N'Bass 2 58 R&B2 R&B 2

47 Pop Rk Pop Rock 59 R N'R1 Rock N'Roll 1

48 Punk Punk 60 Boogie1 Boogie 1

49 Fusion4 Fusion 4 61 Beguine Beguine

50 BreakBt2 Break Beat 2 62 NewAge New Age

51 Dance Rk

Documents

MPS-600 e-drum moduleimages6.thomann.de/pics/atg/atgdata/document/manual/c... · 2014. 5. 1. · e-drum module user manual. Musikhaus Thomann e.K. Treppendorf 30 96138 Burgebrach