Click here to load reader

Mp door closer

  • View
    242

  • Download
    3

Embed Size (px)

DESCRIPTION

 

Text of Mp door closer

  • "Marco Polo" is a brand name that combines every aspect of excellence in door controls. And as part of a programto provide product to archive to the highest standards, D800 and D900 series have been developed specifically tocomply with the requirement of the American standard ANSI Grade 1-156.4 but also the T1000B series meetsthe latest European standard BS EN1154-2-4.

    During the past decade, "Marco Polo" had been developed a wide range architectural hardware with high quality.Most of our products were highly recommended and accepted by distributors, owners and architects due to newstandard for innovation, durability and better service.

    "Marco Polo" architectural hardware has the resources to meet the quality and cost demands essential todifferent application needs. It has been offered reliable products performance, fast service and with an ideal price.Full line of "Marco Polo" products available in a variety of finishes under different circumstances and needs.

    "MARCO POLO" DOOR CLOSERS AND FLOOR HINGES

    D800D900ANSI 156.4 () T1000B BS EN1154/2-4

    Table of Contents

    Model Number PageMP-BTS-84

    Dimensions & Installation For BTS-84

    Patch Fitting

    MP-D70

    MP-D800

    MP-D900

    MP-T1000

    MP-T1000B

    MP-T320

    MP-T420

    Reference For Specification

    How To Order

    1

    2

    3

    4

    5

    6

    7

    8

    9

    10

    11

    12

  • 1306

    108

    60

    40

    Hold open 90

    or Non-Hold open

    SpeedDecrease

    BTS-84 SERIES FLOOR HINGES

    BTS-84 BTS-84 BTS-84 BTS-84 BTS-84 10 Years Warranty

    Single or Double Action Door

    High-grade cast iron mechanism body withpainted for corrosion resistance

    Galvanized steel box with zinc protection andpainted for corrosion resistance

    Stable hydraulic fluid for any climaticoperation and constant lubrication

    Stainless steel cover plate with various finishes:US3, US4, US32, US32D

    Use for Timber, Metal or Glass Door

    Adjustable closing (from 130-15)and latching (from 15-0) speed

    China National Accreditation of Laboratories Report No. GTW0211057 with500,000 cycles passed

    SpeedIncrease

    Latching Speed adjusting valve

    Closing Speed adjusting valve

    Closing range 130~15

    130 ~15

    Latching range 15~015~ 0

    nepOdloH-noN

    nepOdloH

    euqroT

    rooDelbacilppAeziS

    rooDmumixaMthgieW

    L48-STB-PM OH-L48-STB-PM mN61 mm0012x058 gk07M48-STB-PM OH-M48-STB-PM mN91 mm0012x059 gk59H48-STB-PM OH-H48-STB-PM mN62 mm0012x0511 gk511

  • 2Dimensions & Installation For BTS-84 Series

    Standard arm set

    Installation

    Accessaries for single action timber door

  • 3Glass Door Patch Fittings

    BTS-020Top Patch

    BTS-010Bottom Patch

    BTS-100Patch Lock

    BTS-040Angle Patch for Over Panel

    BTS-030Over-Panel Patch

  • 4Marco Polo D70 Series Door Closers Economicmodel for residential useD70 D70 D70 D70 D70 / / / / /

    UL Listed productUL

    Comply with Warrington 60 minutes FRP standardWarrington

    100,000 cycles passed

    Power 1 to 4 to be selected for various door1-4

    Timber or Metal Door

    Optional

    Parallel Arm (PA)

    Built-in Hold Open (BH)

    Adjustable back check function (AB)()

    Delay Action (DA)

    D70 SERIES DOOR CLOSERS

    Finish / Enamel Silver /

    Standard Arm Installation on pull On push side Parallel Bracket on push side

    42mm

    180mm66mm

    Latching Speedadjusting valve

    Closing Speedadjusting valve

    noitallatsnIdradnatS

    noitallatsnImrAlellaraP

    eziSrooDelbacilppA

    thgieWrooDmumixaM

    nepOdloH-noN nepOdloH nepOdloH-noN nepOdloH .txE .tnI .txE .tnI AS-17D OH-AS-17D AP-AS-17D OH-AP-AS-17D mm056 mm007 gk03 gk53AS-27D OH-AS-27D AP-AS-27D OH-AP-AS-27D mm057 mm008 gk53 gk04AS-37D OH-AS-37D AP-AS-37D OH-AP-AS-37D mm009 mm059 gk55 gk06AS-47D OH-AS-47D AP-AS-47D OH-AP-AS-47D mm0501 mm0011 gk57 gk08

  • 5D800 Durability Surface Mounted Door Closers

    IntroductionMarco Polo D800 Power adjustable (No. 1 to No.4) doorclosers are manufactured by quality assured ISO9002factory since 1993. All closers are produced complied withANSI Grade 1 standard. Non handed installation withstandard arm, parallel arm bracket and hold open armavailable.

    Certification:Closers are constructed with precise aluminum die-castbody and complied to ANSI Grade 1 standard with 2million cycle passed. Stable hydraulic fluid for anyclimatic operation and constant lubrication.

    Warranty: D800 Durability surface mounted door closer isguaranteed for 20 years from the date of manufactureagainst any defect in material or workmanship. Defectiveproduct will be replaced with a new unit; but no claims fordamage incurred or work done thereon will be allowed.This guarantee is void if the product has been subject tomisapplication or abuse.

    Special Features:BC = Back checkThis feature ensures the safe deceleration and restraint adoor to be flung open. Back check is proportional to dooracceleration but also imperceptible when the door is openedslowly, however, it will responds in equal measure if thedoor is opened rapidity. It would be recommended usingin public area.

    DA = Delayed actionThis feature is delayed the door closing when disablepersons or people who carry to much things, they are ableto pass the door without any difficulty.

    HO=Hold OpenThis feature is enable the door to be held at the ideal angle.

    dradnatS lellaraP mm/eziSrooDmumixaM gk/thgieWrooDmumixaM

    nepOdloH-noN nepOdloH nepOdloH-noN nepOdloH .txE .tnI .txE .tnIDS-008T OH-008T AP-B008T OH-AP-B008T mm0501-008 mm0011-057 gk08-53 gk58-04

  • 6Finish / Stainless Steel Cover / US3 / US32 / US32D /

    Metal Cover , Arm / US3 / US4 / US26 / US26D /

    PVC Cover / US4 / US26D /

    Marco Polo D900 Series Heavy Duty Door Closers forCommercial useD900D900D900D900D900 / / / / /

    Comply with BHMA / ANSI Grade 1-156.4BHMA / ANSI Grade 1-156.4

    2,000,000 cycles passed

    Power 2 to 5 to be adjusted under difference circumstance1-4

    Timber or Metal Door

    Optional /

    Parallel Arm (PA)

    Built-in Hold Open (BH)

    Adjustable Hold Open Arm(HO)

    Adjustable back check function (AB) ()

    Delay Action (DA)

    Barrier Free (BF)

    Polished Brass / Stainless Steel Cover and Arm Set

    D900 SERIES DOOR CLOSERS

    noitallatsnIdradnatS

    noitallatsnImrAlellaraP

    eziSrooDelbacilppA

    thgieWrooDmumixaM

    nepOdloH-noN nepOdloH nepOdloH-noN nepOdloH .txE .tnI .txE .tnI AS-DS-009D OH-DS-OH-009D AP-DS-009D OH-AP-DS-009D mm0501-057 mm0011-008 gk57-53 gk08-04

  • 755

    207 38.5

    Latching Speed Range approx. 15

    Closing Speed Range

    IntroductionMarco Polo T1000 series door closers are manufactured by qualityassured ISO9002 factory since 1993, it provides three different holdingpower to be selected using on interior or exterior doors; non-handedinstallation makes you feel much convenience. Optional functions suchas BACK CHECK, DELAY ACTION or HOLD OPEN ARM areavailable.

    T1000 1993ISO9002() Warranty

    T1000 series door closers are guaranteed for 10 years and 500,000 cyclespassed. from the date of manufacture against any defects in material orworkmanship Defective product will be replaced a new unit, but no claimfor damage incurred or work done thereon will be allowed. Thisguarantee is void if the product has been found misapplication or abuse.

    Finish / : US28 / US4 /

    T1000 SeriesDOOR CLOSERS

    (US28)

    (US4)

    Latching speed adjusting valve

    Closing speed adjusting valve

    noitallatsnIdradnatS

    noitallatsnImrAlellaraP

    eziSrooDelbacilppA

    thgieWrooDmumixaM

    nepOdloH-noN nepOdloH nepOdloH-noN nepOdloH .txE .tnI .txE .tnI AS-2001T OH-AS-2001T AP-AS-2001T OH-AP-AS-2001T nn057 mm008 gk53 gk04AS-3001T OH-AS-3001T AP-AS-3001T OH-AP-AS-3001T mm009 mm059 gk55 gk06AS-4001T OH-AS-4001T AP-AS-4001T OH-AP-AS-4001T mm0501 mm0011 gk57 gk08

  • 8A

    B C

    Latching Speed Range approx. 15

    Closing Speed Range

    approx. 60Back Check Range

    A B CT1000B 55mm 207mm 38.5mmT2000B 60mm 236mm 38.5mm

    T1000B, T2000B SERIES DOOR CLOSERS

    T1000B T1000B T1000B T1000B T1000B T2000B T2000B T2000B T2000B T2000B , , , , , 1993ISO9002 ()

    IntroductionMarco Polo T1000B & 2000B series door closers are manufacturedby quality assured ISO9002 factory since 1993, it provides adjustableholding power using on interior or exterior doors; non-handedinstallation makes you feel much convenience. Closing and Latching Speedare to be adjusted under difference circumstance. Optional functions suchas BACK CHECK, DELAY ACTION or HOLD OPEN ARM areavailable.

    WarrantyDoor closers are guaranteed for 10 years and 500,000 cycles passed. fromthe date of manufacture against any defects in material or workmanshipDefective product will be replaced a new unit, but no claim for damageincurred or work done thereon will be allowed. This guarantee is void ifthe product has been found misapplication or abuse.

    Certification :All T1000B and T2000B door closers comply with the EuropeanStandard BS EN1154 Size 2-4 and BS EN 1154 Size 3-5 but also500,000 cycles passed. Stable hydraulic fluid for any climaticoperation and constant lubrication.

    T1000BT2000B BS EN1154 2-43-5500,000

    Finish / :

Search related