Cleanliness Testing Shed Testing-Particle Emission Testing Cleaning Techniques-Spec Development • Patch Test (Visual and Gravimetric) Elemental-Chemical Analysis Carbon/Sulfur Analysis (LECO CS744) Optical Spark Emission Spectroscopy (Spectro MaXx-M) ICP-MS and GC-MS X-Ray Fluorescence Spectroscopy (XRF) Metallography Sample Prep - Mounting and Polishing for Cross Section Analysis Nikon Epiphot Metallograph (50x to 1000x) Non-contact Surface Metrology (Hirox HX 8700) Physical Testing Tensile/Compression/Bend Test, ASTM E-8 Sample Prep – EDM Machining Rockwell Hardness/Micro Hardness Miscellaneous Electron Microscopy SEM/EDS • JEOL JSM-6610 LV Scanning Electron Microscope with EDAX Apollo XP Energy Dispersive X-Ray Spectrometer - High Resolution Imaging with Quantitative Chemical Analysis, Line Scans, Elemental Mapping, and Particle Analysis Laser Scattering Particle Size and Distribution Analysis • Microtrac S3000 – 0.04-2800 μm • Horiba LA-950 – Wet & Dry, 0.01-3000 μm Helium Leak Test Other testing services available upon request. Mott’s Materials Characterization Center 84 Spring Lane, Farmington, CT 06032-3159 860-747-6333 | Fax 860-747-6739 | www.mottcorp.com | [email protected] Services Filtration Efficiency & Feasibility Testing Liquid/Solid – Gas/Solid • Liquid Filter Performance Test, Single Pass, Constant Rate ASTM F 795 • Liquid Filter Performance Test, Single Pass, Constant Pressure ASTM F 796 • Standard Test Methods for Non-filterable Matter (Total Suspended Solids) in Water ASTM D5907-13 Liquid and Aerosol Filter Efficiency Testing per ASTM and ISO Standards Filter Efficiency/Challenge Test per SEMI F38-0699 (Rated Flow) Dust Loading-Air Filter Capacity per ISO 12500-3 (2009 E) Porous Material Characterization Dimensional/Density – % Porosity – ISO 2738 • Permeability Sintered Metal Materials Gas Flow Rate vs. Differential Pressure per Unit Area (5 Pressures) Bubble Point – Max Pore Size, ASTM E128-61 • Pore Size Characteristics of Membrane Filters, ASTM 316-86 Pore Size Distribution • PMI Capillary Flow – Pore Size Distributions (0.06 to 600 μm) Liquid Flow Rate vs. Differential Pressure MCCS 0815 About Mott: World Leader in Sintered Porous Metal Technology Expert Design and Engineering Capabilities Engineering Solutions for Demanding Applications State-of-the-Art Filtration Laboratory ISO 9001-2008 Certified and ASME NQA-1 Compliant

Mott’s Materials Characterization Center · Nikon Epiphot Metallograph (50x to 1000x) Non-contact Surface Metrology (Hirox HX 8700) Physical Testing Tensile/Compression/Bend Test,

Download PDF Report

Upload
vuongphuc
View
213
Download
0

Embed Size (px)

Citation preview

Page 1: Mott’s Materials Characterization Center · Nikon Epiphot Metallograph (50x to 1000x) Non-contact Surface Metrology (Hirox HX 8700) Physical Testing Tensile/Compression/Bend Test,

Cleanliness Testing Shed Testing-Particle Emission Testing Cleaning Techniques-Spec Development

• Patch Test (Visual and Gravimetric)

Elemental-Chemical Analysis Carbon/Sulfur Analysis (LECO CS744) Optical Spark Emission Spectroscopy

(Spectro MaXx-M) ICP-MS and GC-MS X-Ray Fluorescence Spectroscopy (XRF)

Metallography Sample Prep - Mounting and Polishing

for Cross Section Analysis Nikon Epiphot Metallograph (50x to 1000x) Non-contact Surface Metrology (Hirox HX 8700)

Physical Testing Tensile/Compression/Bend Test, ASTM E-8 Sample Prep – EDM Machining Rockwell Hardness/Micro Hardness

Miscellaneous Electron Microscopy SEM/EDS

• JEOL JSM-6610 LV Scanning Electron Microscope with EDAX Apollo XP Energy Dispersive X-Ray Spectrometer - High Resolution Imaging with Quantitative Chemical Analysis, Line Scans, Elemental Mapping, and Particle Analysis Laser Scattering Particle Size and

Distribution Analysis • Microtrac S3000 – 0.04-2800 µm • Horiba LA-950 – Wet & Dry, 0.01-3000 µm Helium Leak Test

Other testing services available upon request.

Mott’s Materials Characterization Center

84 Spring Lane, Farmington, CT 06032-3159860-747-6333 | Fax 860-747-6739 | www.mottcorp.com | [email protected]

Services

Filtration Effi ciency & Feasibility Testing Liquid/Solid – Gas/Solid

• Liquid Filter Performance Test, Single Pass, Constant Rate ASTM F 795 • Liquid Filter Performance Test, Single Pass, Constant Pressure ASTM F 796 • Standard Test Methods for Non-fi lterable Matter (Total Suspended Solids) in Water ASTM D5907-13 Liquid and Aerosol Filter Effi ciency Testing per

ASTM and ISO Standards Filter Effi ciency/Challenge Test per

SEMI F38-0699 (Rated Flow) Dust Loading-Air Filter Capacity per

ISO 12500-3 (2009 E)

Porous Material Characterization Dimensional/Density – % Porosity – ISO 2738

• Permeability Sintered Metal Materials Gas Flow Rate vs. Differential Pressure

per Unit Area (5 Pressures) Bubble Point – Max Pore Size, ASTM E128-61

• Pore Size Characteristics of Membrane Filters, ASTM 316-86 Pore Size Distribution

• PMI Capillary Flow – Pore Size Distributions (0.06 to 600 µm) Liquid Flow Rate vs. Differential Pressure

MCCS 0815

About Mott: World Leader in Sintered Porous Metal Technology Expert Design and Engineering Capabilities Engineering Solutions for Demanding Applications State-of-the-Art Filtration Laboratory

ISO 9001-2008 Certifi ed and ASME NQA-1 Compliant