motorola SLVR with iTunes®

Install Memory Card

Open the memory card cover.

1

Press the card in until it clicks into place, then close the card cover.

2

motorola SLVR with iTunes®

Scroll to Settings,then press the centernavigation key

2

View Storage Information

Press the Menu key.

1

Scroll to Phone Status,then press the centernavigation key

3

Scroll to Storage Devices,then press the centernavigation key

4

Select the desired device, then press Details.

Tip: Press the Menu key toformat or rename the memory card.

5

motorola SLVR with iTunes®

Scroll to Multimedia,then press the centernavigation key

2

View Multimedia

Press the Menu key.

1

Scroll to Sounds, Pictures, or Videos, then press the center navigation key.

Here we’ll show you how to view your pictures.

3

Select a picture andpress View.

Tip: To switch to the pictures in phone memory, scroll down to the bottom of the screen and select Phone Memory or pressthe Menu key and selectPhone Memory.

4

motorola SLVR with iTunes®

Press the Menu key.

1Transfer Multimedia

Scroll to Settings,then press the centernavigation key.

2

Scroll to Connection,then press the center navigation key.

3

Scroll to USB Settings,then press the center navigation key.

4

If the connection is notalready set to Memory Card, scroll right tochange it.

5

Connect one end of the Motorola OriginalEnhanced USB cable to your phone and the other end to a USB port on your computer.

6

Find where your phone’s memory carddisplays as a Removable Disk icon.

On a PC, this is the My Computer window.On a Mac, it’s on the desktop.Double click the Removable Disk icon.

7

Drag and drop fi les between yourcomputer and the folders on the memory card use the following folders.

mobile/picture - pictures, wallpaper, screen saversmobile/video - video clipsmobile/audio - MP3 fi les

8Select USB Mass Storage Deviceand OK. Then disconnect the cable.

10

On your phone, scroll right to set the USB connection back to Data/Fax.

11

Before disconnecting the cable:

On a PC, double click the Safely Remove Hardware icon at the bottom of your computer screen. Select USB Mass Storage Device and Stop.

On a Mac, drag the Removable Disk icon to the trash.

9

motorola SLVR with iTunes®

Take and Send a PicturePress the Menu key.

Tip: Your phone may have Camera as the left soft key. If it does, just pressCamera to go directly tothe camera.

1

Scroll to Multimedia,then press the center navigation key.

2

Press the center navigation key.

3

To view or change where your pictures will be stored, press the Menu key and select Phone Memory or Memory Card.

4

Scroll up or down to zoom in or out.

Scroll right or left to make the picture lighter or darker.

5

Press Capture or the center navigation key.

6

Enter a message, or just press Send To to send the picture without a message.

9

Select the desired option, then press the center navigation key.

Here we’ll show you howto send a picture in amessage.

8

Press Send.

12Press Store.

7

Select one or more names from your phonebook. Scroll to the name, then press the center navigation key so a checkmark appears next to the name.

10

Select the name again to remove it from the message. It is removed when a checkmark no longer appears.

11

motorola SLVR with iTunes®

Record a Video

Press the Menu key.

1

Scroll to Multimedia,then press the center navigation key.

2

Scroll to Videos,then press the center navigation key.

3

To view or change where your videos will be stored, press the Menu key and select Phone Memory or Memory Card.

4

Scroll up or down to zoom in or out.

Tip: To view or change more video options, press the Menu key and select Videos Setup.

5

To start recording,press Capture.

To stop recording,press Stop.

6

Press Store.

7

Select the desired option, then press the center navigation key.

Here we’ll just store the video.

8

motorola SLVR with iTunes®

Press the Menu key,then select

SettingsConnectionUSB Settings

1

Transfer Music

Scroll right to change Default Connection to Memory Card.

2

Connect one end of the Motorola OriginalEnhanced USB cable to your phone and the other end to a USB port on your computer.

4

On your computer, open the iTunes desktop application.

3

Wait for the phone iconto appear in the Sourcelist. This may take up toone minute.

5

To manually transfer songs, drag and drop them to the phone icon in the Source list.

-or-

To transfer a random selection of songs, select your phone in the Source list and then click Autofi ll. Songs are transferred according to your settings in the iTunes desktop application.

Note: Transfer times depend onthe size of the song. It may take45 seconds (or longer) to transfer a 4MB song.

6

When the transfer is complete, you will see a message in the iTunes desktop application and the Do Not Disconnect message on the phone disappears.

Click the Eject button next to the phone icon in the desktopapplication and remove the cable. Do not disconnect the cable until the transfer is complete.

7

motorola SLVR with iTunes®

Select Songs, then scroll right. Select a song and press Play.

Tip: To play all songs in a list, select Playlist, Artists, Albums,or Songs then scroll right. Select All and press Play.

2

Play Songs

Press the iTunes key.

1Scroll up or down to adjust the volume.

Scroll left or right to play the previous or next song.

Press and hold the left or right navigation key to rewind or fast forward the current song.

3

Use the wired stereoheadset to listen tomusic. You cannot listen tomusic using a Bluetooth®headset or while aBluetooth headset isconnected to your phone (turn the headset power off).

4

motorola SLVR with iTunes®

Add PTT Contact

Press the PTT key.

1

Press the center navigation key twice.

Tip: To view or change PTT settings, select PTT Menu > PTT Settings > Personalize.

2

Enter the name, then press OK.

3

Enter the number, then press OK.

4

Press Done.

5

motorola SLVR with iTunes®

Make PTT Call

Press and hold the PTTkey on the side of the phone. Begin to talkafter the phone emits achirping sound.

When you are fi nishedtalking, release the PTT key.

2

Each time you want to talk, press the PTT key and talk after you hear the tone.Release the PTT key when you are fi nished.

Note: Only one person at a time can talk

3The connection ends when no one speaks for 20 seconds or when you press the End key.

Note: The time interval for ending the connection may be different. Contact your service provider for more information

4

To send a PTT alert instead of a standard PTT call, press the Alert key after selecting the contact.The contact’s phone rings or vibrates, and thecontact can speak fi rst.If the contact does not respond, the call ends.

5

Press the PTT key and select a contact.

-or-

Enter a PTT subscriber’s phone number.

2

motorola SLVR with iTunes®

Pair Link Headset

Press the Menu key.

1

Scroll to Connection,then press the center navigation key.

3

Press the center navigation key.

4

Scroll to Power, then scroll right to turn your phone’s Bluetooth® feature on.

Tip: To extend battery life, turn Bluetooth power off when not in use.

6Scroll to Handsfree,then press the centernavigation key.

9

Press the centernavigation key.

10

Press the centernavigation key.

11

Press Yes.

12

Enter the passkey 0000, then press Ok.

When pairing issuccessful, the light on the headset changes from steadily lit to fl ashing.

13

To confi rm your phone and headset are successfully paired and operatingproperly, put the headset on and make a call. If your phone and headset are successfully paired, you will hear ringing.

14

Scroll to Settings,then press the center navigation key.

2

Press and hold the Callbutton on the headset untilthe light turns on andremains steadily lit.

If the light is fl ashing or does not remain steadily lit, make sure the headset is fully charged and repeat this step.

If you are using a headset with a folding microphone, quickly unfold the microphone so it is fully extended. The light should remain steadily lit.

7

Scroll to Setup,then press the center navigation key.

5Press Back.

8

motorola SLVR with iTunes®

Autoconnect Headset

Press the Menu key.

1

Scroll to Settings,then press the center navigation key.

2

Scroll to Connection,then press the center navigation key.

3

Scroll to Device History,then press the center navigation key.

5

Scroll to the headset name,then press the center navigation key.

6

Press Done.

8

To use your headset, turnthe headset power on (onheadsets with a foldingmicrophone, unfold themicrophone so it is fully extended). Your phone will automatically connect tothe headset.

To disconnect your phone from the headset, turn the headset power off (onheadsets with a foldingmicrophone, close themicrophone).

9

Press the center navigation key.

4

Scroll to Access, then scroll right to changeAccess setting toAutomatic.

7