71
Morocco Customer Event Datacenter March 2018 www.siemens.be Restricted © Siemens AG 2016

Morocco Customer Event Datacenter March ... - w5.siemens… · products, systems and solutions for all voltage levels make power supplyefficient, reliable and safe ... Siemens portfolio

Embed Size (px)

Citation preview

MoroccoCustomer EventDatacenterMarch 2018

www.siemens.beRestricted © Siemens AG 2016

Restricted © Siemens nv-saPage 2 Building Technologies

ContentTotally Integrated Power

1. Overview – focus area

2. Customer challenges and requirements

3. Boundary conditions

4. Planning Support

5. Portfolio

6. Value proposition contribution

7. Data center in a nutshell

8. References, documentations & contacts

Restricted © Siemens nv-saPage 3 Building Technologies

Our software and hardwareproducts, systems and solutionsfor all voltage levels make powersupply efficient, reliable and safe –in infrastructure, cities, buildingsand industrial plants.Our portfolio can be linked toindustrial and building automationand is completed bycomprehensive supportthroughout the entire lifecycle.

We bring power to the pointTotally Integrated Power

Restricted © Siemens nv-saPage 4 Building Technologies

Comprehensive Siemens portfolio for data centersTotally Integrated Power

• Building manage-ment. system

• DCIM

• Energy and power management

• Danger/security management

• Fire detection

• Extinguishing/

suppression

• Intrusion detection

• Access control

• Medium voltage infeedand protection

• Transformers

• Low voltage main power distribution

• Uninterruptible power supply (UPS)

• Busbar trunking systems & tap-offunits / cabling with PDUs

• Power management

• Evacuation

• Video surveillance

• Perimeter protection

• Control and automate

• Condition

• Ventilation

• Cooling

C

Fire safety

Totally Integrated Power

SecurityBACS

Mgmt. applications

• Life Cycle Services

Services

Restricted © Siemens nv-saPage 5 Building Technologies

Siemens portfolio for data centersTotally Integrated Power

§ Efficient, reliable, safe – These are the demandsplaced on electrification and electrical powerdistribution

§ Nothing works without electricity,but everything works better with TIP

§ Data centers face tremendous challenges tominimize downtime and maximize energy efficiency

§ To protect critical data, data centers always haveto ensure the stability and availability of power

§ Totally Integrated Power from Siemens providesan efficient, uninterrupted power supply to datacenters of all sizes

§ Our extensive power distribution portfoliodelivers maximum reliability and availability in everysituation

Philosophy

Everything for future-proof power supply

Comprehensive portfolio with full lifecycle competenceand perfect link to automation and digitalization

Restricted © Siemens nv-saPage 6 Building Technologies

Siemens portfolio for data centersTotally Integrated Power

§ Efficient, reliable, safe – These are the demandsplaced on electrification and electrical powerdistribution

§ Nothing works without electricity,but everything works better with TIP

§ Data centers face tremendous challenges tominimize downtime and maximize energy efficiency

§ To protect critical data, data centers always haveto ensure the stability and availability of power

§ Totally Integrated Power from Siemens providesan efficient, uninterrupted power supply to datacenters of all sizes

§ Our extensive power distribution portfoliodelivers maximum reliability and availability in everysituation

Philosophy

Everything for future-proof power supply

Comprehensive portfolio with full lifecycle competenceand perfect link to automation and digitalization

Restricted © Siemens nv-saPage 7 Building Technologies

Boundary conditionsTotally Integrated Power

Besides UL and IEC, our products also comply with local country base regulations

Restricted © Siemens nv-saPage 8 Building Technologies

ContentTotally Integrated Power

1. Overview – focus area

2. Customer challenges and requirements

3. Boundary conditions

4. Planning Support

5. Portfolio

6. Value proposition contribution

7. Data center in a nutshell

8. References, documentations and contacts

Restricted © Siemens nv-saPage 9 Building Technologies

Planning supportTotally Integrated Power

Belgium

Netherlands

Spain

Turkey

Russia

Brazil

USA

Canada

China

Saudi Arabia

United

Kingdom (UK)

Portugal

Austria

Italy

Switzerland

Colombia

Experienced TIP Consultant Support in 17 countries – www.siemens.com/tip-cs/contact

Germany

Mexico

Restricted © Siemens nv-saPage 10 Building Technologies

Planning supportTotally Integrated Power

The expert support covers the basic calculations andthe various planning phases right through to drawingup customer specifications – irrespective of whetherpower supply systems are being newly installed,expanded or overhauled, or whether a completesolution is required.

The SIMARIS planning tools provide efficient supportin dimensioning an electric power distribution systemand determining the equipment and distributingsystems for it.

Expertise know-how & planning tools – www.siemens.com/simaris

Restricted © Siemens nv-saPage 11 Building Technologies

Overview SIMARIS planning tools

The SIMARIS planning tools provide efficient support in dimensioning an electric power distribution systemand determining the equipment and distributing systems for it.

SIMARIS designfor network calculation and dimensioning

SIMARIS projectfor determining the space requirements of distributing systems and the budget as well ascreating technical specifications

SIMARIS curvesfor visualizing characteristic tripping curves,cut-off current and let-through energy curves

Restricted © Siemens nv-saPage 12 Building Technologies

Complete TIP portfolio in the SIMARIS planning tools

G

~

~

M

Busbar

UPSBusbartrunkingsystem

~~M Distribution boards

Busbar trunking systems

Low-voltage switchgear

Transformers

Medium-voltage switchgear

Restricted © Siemens nv-saPage 13 Building Technologies

SIMARIS design

• Dimensioning of electric networks based on realproducts including automatic selection of suitableequipment

• Dimensioning performed according to the acceptedrules of good installation practice and all applicablestandards (VDE, IEC)

• Calculation of short-circuit current, load flow,voltage drop and energy balance

• Consideration of required personal, short-circuit andoverload protection

Restricted © Siemens nv-saPage 14 Building Technologies

Planning with SIMARIS project

On the basis of the project structure you have defined and the selected basic technical data,the following will be determined:

Medium-voltage switchgear:• Selection of required panels

Low-voltage switchgear and distribution boards for theelectrical installations:• Selection of the required protective / switching devices,

for SIVACON S8 in addition frequency converters(built-in units and cabinets)

Busbar trunking systems:• System selection, length indication and selection of

additionally required components (e.g. feed-incomponents, directional change pieces, tap-off units)

Transformers:• System selection, quantity specification

Result: front view with dimensions

Result:automatic determination of the best suited distributionsystems, equipping of distribution boards with devicesincl. front view with dimensions

Result: Component list

Result: Component list

Restricted © Siemens nv-saPage 15 Building Technologies

SIMARIS curves

• Visualize and evaluate tripping characteristics including the option to simulate device settings

• Visualize characteristic cut-off current and let-through energy curves

• Select device per order number or easy-select feature

• Save selected devices as favorites

• Save several characteristic curves plus settings as overall project

Restricted © Siemens nv-saPage 16 Building Technologies

Technical ManualSIMARIS planning tools

Contents• Basic and specific information about network

calculation and system planning using the SIMARISplanning tools

• Specific technical information about networkcalculation using SIMARIS design

• Specific technical information about networkcalculation using SIMARIS project

• Available in German and English

You can open the Technical Manual via the Helpmenuà "Technical manual", or download it from

siemens.com/simaris/help.

Restricted © Siemens nv-saPage 17 Building Technologies

ContentTotally Integrated Power

1. Overview – focus area

2. Customer challenges and requirements

3. Boundary conditions

4. Planning Support

5. Portfolio

6. Value proposition contribution

7. Data center in a nutshell

8. References, documentations & contacts

Restricted © Siemens nv-saPage 18 Building Technologies

Totally Integrated PowerAn integrated solution approach from infeed into to the rack

1

3

5

6MV infeed

LV main distribution

Busbar trunking systems & tap-off boxes /cabling with PDUs

EPMS /Monitoring device

PDU: Power Distribution Unit

Siemens portfolio

Partner portfolio

4 UPS / Generator

2 Transformers

Restricted © Siemens nv-saPage 19 Building Technologies

Totally Integrated PowerScope of supply at medium voltage level

LV MD–NPS A LV MD–SPS A

Power system protection, SIPROTECFault detection and protectionsignalling, controlling, and transmissionof operational status

Medium voltage gas insulatedswitchgear§ NXPLUS C§ 8DJHMedium voltage air insulatedswitchgear§ NXAIR

SPS: Safety Power SupplyNPS: Normal Power SupplyLV MD: Low Voltage Main Distribution

G

1

§ Availability§ Selectivity§ Transparency

Benefits

Restricted © Siemens nv-saPage 20 Building Technologies

Totally Integrated PowerMedium voltage infeed and protection

1

G

Medium voltage infeed

GeneratorTransformer

L

Low voltagemain distribution

UPS

Subdistribution

Loads

Other loads

NXAIR NXPLUS

7SJ80 + I/O Unit7SJ82 / 7SJ85 7SJ82 / 7SJ85

Communication IEC 61850 / IEC 104

8DJH

SICAM mic

Distribution schedule Systems and components

Restricted © Siemens nv-saPage 21 Building Technologies

Totally Integrated PowerMedium voltage infeed and protection

§ Hermetically sealed primaryencapsulation ensures switchgear ismaintenance free for lifetime

§ Climate independent design supports failsafe operationeven at high altitudes

§ Uniform operation concept for switchingdevices supports easeof operation

§ Modular construction supports flexibilityin selection of feeders

§ Maintenance free

§ Up to 36 kV, 20 kA,630 A busbar, 630 A feederUp to 24 kV, 25 kA,2500 A busbar, 2500 A feeder

§ Metal-enclosed, single-busbar§ Gas-insulated§ Hermetically enclosed§ Factory-assembled,

type-tested switchgearaccording IEC 62 271-200

§ Flexible due to extension option andblock formation, individual panels and blockversions

1

Benefits8DJH36 –Gas insulated modular switchgear

Restricted © Siemens nv-saPage 22 Building Technologies

Totally Integrated PowerMedium voltage infeed and protection

§ Complete metal enclosureensures full protection against electricshock

§ Logical mechanical interlocking systemsupports operations witha closed door only

§ Use of a compact vacuum circuit breakerdesign ensures optimized paneldimensions

§ Maintenance intervals ≥ 10 years forambient conditions according to IEC62271-1 and IEC 62271-200

§ Up to 17.5 kV, 40 kA,4000 A busbar, 4000 A feederUp to 24 kV, 25 kA,2500 A busbar, 2500 A feeder

§ Metal-enclosed, single-busbar§ Air-insulated§ Internal arc classification IAC A FLR,

up to 40 kA (even with open doors andracked out circuit breakers)

§ Factory-assembled,type-tested switchgearaccording IEC 62 271-200

1

BenefitsNXAIR –Air insulated switchgear

Restricted © Siemens nv-saPage 23 Building Technologies

Totally Integrated PowerMedium voltage infeed and protection

§ Hermetically welded stainless-steelenclosure ensures switchgear isinsensitive to aggressive environments.

§ SF6 insulation helps to achieve compactconstruction thereby minimizing spacerequirements.

§ Gas tight for lifetime feature supportsindependencefor the site altitude

§ Maintenance free

§ Up to 15 kV, 31.5 kA,2500 A busbar, 2500 A feederUp to 24 kV, 25 kA,2500 A busbar, 2000 A feeder

§ Metal-enclosed, single-busbar§ Gas-insulated§ Hermetically enclosed§ Factory-assembled,

type-tested switchgearaccording IEC 62 271-200

1

BenefitsNXPLUS C –Gas insulated switchgear

Restricted © Siemens nv-saPage 24 Building Technologies

Totally Integrated PowerMedium voltage infeed and protection

§ Modular concept ensuring consistency andintegrity of all functionalities across theentire device series

§ Perfect for protection, control, monitoring,and measuring applications in electricalenergy systems

§ Individually configurable devices –cost-efficient solution over the entire lifecycle

§ Trendsetting system architecture –flexibility and security for highly meshedsystems

§ Safety and security inside –maximum possible cyber security andprotection of personnel and equipment withproven functions

§ Consistent engineering for system anddevices –efficient operation concepts, flexibleengineering

§ Certified quality and conformity –confirmed by independent test laboratoriesworldwide

§ Adaption to the topology of the desiredcommunication structure, such as ring orstar configurations

§ Scalable redundancy in hardware andsoftware (protocols)

§ Multiple communication modules that canbe retrofitted

§ The module hardware is independent of thecommunication protocol used

§ 2 independent protocols and a serialcommunication module

§ Up to 8 interfaces are available§ Data exchange via IEC 61850 for up to 6

clients using an Ethernet module or theintegrated Ethernet interface

1

BenefitsSIPROTEC 5 – Protection, automation, andmonitoring device

Restricted © Siemens nv-saPage 25 Building Technologies

Totally Integrated PowerAn integrated solution approach from infeed into to the rack

1

3

5

6MV infeed

LV main distribution

Busbar trunking systems & tap-off boxes /cabling with PDUs

EPMS /Monitoring device

PDU: Power Distribution Unit

Siemens portfolio

Partner portfolio

4 UPS / Generator

2 Transformers

Restricted © Siemens nv-saPage 26 Building Technologies

Totally Integrated PowerTransformers

LV MD–NPS A LV MD–SPS A

SPS: Safety Power SupplyNPS: Normal Power SupplyLV MD: Low Voltage Main Distribution

G

2

§ Efficiency§ Reliability§ Compatibility

BenefitsTransformersGEAFOL cast-resin transformerOil-immersed transformer(Amorph / ester insulated transformer etc.)

Restricted © Siemens nv-saPage 27 Building Technologies

Totally Integrated PowerAn integrated solution approach from infeed into to the rack

1

3

5

6MV infeed

LV main distribution

Busbar trunking systems & tap-off boxes /cabling with PDUs

EPMS /Monitoring device

PDU: Power Distribution Unit

Siemens portfolio

Partner portfolio

4 UPS / Generator

2 Transformers

Restricted © Siemens nv-saPage 28 Building Technologies

Busbar trunking system SIVACON 8PSLD system: 1100 A to 5000 ALI system: 800 A to 6300 ABD2 system: 160 A to 1250 A

Totally Integrated PowerScope of supply at low-voltage level

Power distribution board SIVACON S8Low-voltage power distribution boards orMotor Control Centersup to 7010 A

Busbar trunking system SIVACON 8PSLR system: 400 A to 6150 ALD system: 1100 A to 5000 ALI system: 800 A to 6300 ABD2 system: 160 A to 1250 A

G

2

SIVACON S8 power distribution boards andSIVACON 8PS busbar trunking system

3

Power distribution board SIVACON S8Low-voltage power distribution boards orMotor Control Centersup to 7010 A

Restricted © Siemens nv-saPage 29 Building Technologies

Busbar trunking system SIVACON 8PSLD system: 1100 A to 5000 ALI system: 800 A to 6300 ABD2 system: 160 A to 1250 A

Totally Integrated PowerScope of supply at low-voltage level

Power distribution board SIVACON S4Low-voltage power distribution boardsup to 4000 A

Busbar trunking system SIVACON 8PSLR system: 400 A to 6150 ALD system: 1100 A to 5000 ALI system: 800 A to 6300 ABD2 system: 160 A to 1250 A

G

2

SIVACON S4 power distribution boards andSIVACON 8PS busbar trunking system

3

Power distribution board SIVACON S4Low-voltage power distribution boardsup to 4000 A

Restricted © Siemens nv-saPage 30 Building Technologies

Totally Integrated PowerLow-voltage main power distribution

Circuit breaker design –compact and safe

Universal mounting design– can beindividually combined

a

b

Fixed-mounted design –cost-effective construction

In-line design –compact and highly functional

c

d

In-line design, fixed mounted –flexible implementation

Reactive power compensation – reduceenergy costs efficiently

e

f

Switch disconnectors3KD

Switch disconnectors withfuses 3NJ62

Molded-case circuit breakers3VL/3VA

Main and EMERGENCY-STOPswitches 3LD

Switch disconnectors withfuses 3KL/KM

Measuring devices7KM PAC

Air circuit breakers 3WL

In-line fuse switchdisconnectors 3NJ4

Fuse switch disconnectors3NP1

SIVACON S8 power distribution board with SENTRON components

3

a b c d e f

Restricted © Siemens nv-saPage 31 Building Technologies

Totally Integrated PowerLow-voltage main power distribution

§ Safety for people and plant by means ofdesign verification with tests in accordingto IEC 61439-2

§ Personal and plant safety in case ofarcing by means of tests according toIEC/TR 61641

§ High flexibility and consistency of allcomponents

Benefits

3

§ Ue up to 690V, In up to 7010 A, Icw up to150kA

§ Internal separation up to Form 4, Degree ofprotection up to IP54

§ Modular technology§ Arc fault resistant design up to

690V,100kA, 300ms according to IEC/TR61641

§ Factory-assembled,design-verified switchgearaccording IEC 61439-2

SIVACON S8 –Low voltage switchboard

Restricted © Siemens nv-saPage 32 Building Technologies

Totally Integrated PowerLow-voltage main power distribution

§ Safety for people and plant by means ofdesign verification with tests in accordingto IEC 61439-2

3

SIVACON S4 –Low voltage switchboard Benefits

Restricted © Siemens nv-saPage 33 Building Technologies

Totally Integrated PowerLow-voltage main power distribution

§ Comprehensive product portfolio for allapplications

§ Consistent design and flexibility throughplatform structure

§ Tested quality through certification

§ Can be shipped as a flat pack

§ Suits applications up to 1250 A

§ Degree of protection up to IP55

§ Available in Safety class 1(protective conductor connection) orsafety class 2 (total insulation)

§ Uniform design, easy handling andhigh quality

§ Compliant with IEC 61439-2

3

BenefitsALPHA distribution boards

Restricted © Siemens nv-saPage 34 Building Technologies

§ Large range of application areas(large buildings, data centers, industry)

§ Integrated, efficient and future-proof solutiondue to integration of measuring devices inenergy management solutions in acc. with ISO50001

§ Cost-efficient infrastructure through compactsandwich design

§ Reliable Installation through hook/boltconnection

§ High degree of safety§ Guided mounting, installation, and plugging for

torque control and for correct conductorconnection

§ Decentralised power distribution with tap-offunits near loads for high transparency

Benefits

§ Power transmission from transformer to low voltagemain and sub power distribution boards from800 A up to 6300 A

§ Power distribution with flexible tap-offunits for loads from 50 A to 1250 A

§ Design verified assembly in acc. withIEC 61439-1/-6

§ Design verified connection toSIVACON S8 switchboards

§ High degree of protection IP55(IP66 for power transmission)

§ Insulation made by Mylar® (epoxy coating withadditional Mylar® 1)

§ High operating voltage (Ue = 1000 V)§ Rated short-time withstand current

Icw (1s) up to 150kA§ Compact design§ Communication-capable measuring devices

SIVACON 8PS LILow voltage busbar trunking system Benefits

Totally Integrated PowerLow-voltage main power distribution

3

1) on request

Restricted © Siemens nv-saPage 35 Building Technologies

Totally Integrated PowerLow-voltage main power distribution

SIVACON 8PS busbar trunking systems – LI system

b

7

5

3

4

1

6

76

2

2

Transformer feeder unit

Fire barrier

Panel feeding unit “flanged end”

Straight trunking unit

Junction unit

Tap-off unit

Accessories for mounting

1

2

3

4

5

6

7

3

Restricted © Siemens nv-saPage 36 Building Technologies

Totally Integrated PowerLow-voltage main power distribution

§ Global breakers that comply with multiplestandards available

§ Minimal downtime when using withdrawabledesign

§ Versatile and can be used worldwidefor temperatures up to 70 °C; no derating up to55 °C

§ Simple to configure, build and modify§ Flexibility due to modular accessories.§ Rating can easily be adjusted to changing

conditions due to the rating plug and RogowskiCoil

§ Ready to close indicator

§ One series –3 sizes, from 630 A to 6300A

§ 3-pole and 4-pole§ Fixed-mounted and withdrawable design§ Breaking capacity from 55kA to 150 kA§ 5 classes of electronic trip units§ Rating plug for setting the rated current§ Ready to close indicator§ Communication solutions via PROFIBUS DP and

Modbus RTU§ Measuring functions.§ Monitoring via powerconfig§ Current transformers with

Rogowski Coil§ Crank integrated, cannot be lost

BenefitsSENTRON 3WLAir circuit breaker

3

3WL

Restricted © Siemens nv-saPage 37 Building Technologies

Totally integrated PowerLow-voltage main power distribution

MCCB above 630AMCCB up to 630A

3VA1 (IEC)3VA1 (IEC)

3VA2 (IEC)3VA2 (IEC)

SelectiveApplications

ACB from 630A to 6300A

= Identical housing dimensions

GeneralApplications

Syst

em-P

latfo

rm

MCCB-ACBPlatform

100A 160 A 250A

1,600A1,000A630A400A250A160 A100A

3WL (IEC)1,250A 2,000A 4,000A 6,300A

FS0 FS1 FS2 FS3New

ACB

MCCB

Withstand

CurrentLim

iting

Restricted © Siemens nv-saPage 38 Building Technologies

Totally Integrated PowerLow voltage main power distribution

§ With our two product lines, modular andeasy-to-fit internal accessories, we covera wide range of applications

§ 3VA1 is the world’s smallest molded casecircuit breaker of its class

§ Applicable for high power distributions dueto high breaking capacity

§ Maximum uptime due to excellentselectivity

§ With its communication and powermetering function, we ensure hightransparency about energy flow in thedata center

§ Two breaker lines:- 3VA1: for standard applications.- 3VA2: for high demand applications

§ Available with Thermal-magnetic trip unit(TMTU) and Electronic Trip Unit (ETU)

§ Compact dimensions§ Breaking capacity classes up to

150 kA§ Rated current up to 630 A§ ETU 8-series with integrated metering function.§ Communication via Modbus TCP, PROFIBUS,

PROFINET§ ‘Real’ switch disconnector according to IEC

60947-3 also available in MCCB design

3VA1 (TMTU)

3VA2 (ETU)

BenefitsSENTRON 3VA1 / 3VA2Molded case cirucit breakers

3

Restricted © Siemens nv-saPage 39 Building Technologies

Totally Integrated PowerAn integrated solution approach from infeed into to the rack

1

3

5

6MV infeed

LV main distribution

Busbar trunking systems & tap-off boxes /cabling with PDUs

EPMS /Monitoring device

PDU: Power Distribution Unit

Siemens portfolio

Partner portfolio

4 UPS / Generator

2 Transformers

Restricted © Siemens nv-saPage 40 Building Technologies

Totally Integrated PowerUninterruptible power supply – static

§ Power distribution equipment design is suchthat they are able to clear faults

§ Relatively complex switching andcontrol circuitry is designed and delivered

§ Power capacitor control panels are designedand offered

§ Power distribution equipment design takescare of the possiblevoltage clipping due to non-delivery of desiredpeak current by the static UPS

§ Power path includes a rectifier, batteries forenergy storage and an inverter

§ All static components, no moving parts

§ Battery systems are generally designed toallow enough time during outage to supportload while power source is shifting from gridto generator

§ The static UPS is always present in thepower path, irrespective of the grid orgenerator being present

§ A static UPS produces an approximated sinewave achieved by chopping DC

§ Power capacitors are used along with staticUPS

§ Pay as you grow concept with static UPS

4

TIP solution for integrationCharacteristics

§ Typically for power output < 1 MVA§ 95% of US market dominated by static UPS§ No mechanical parts§ Lower short-circuit currents (inverter)§ Batteries as storage cells

- Operating and maintenance cost- Space requirements

§ An efficiency of 90 – 99% can be attained

Features

Restricted © Siemens nv-saPage 41 Building Technologies

Totally Integrated PowerUninterruptible power supply – dynamic / rotary

§ Power distribution equipment designhas to consider for a manual bypassduring maintenance activities for a rotary UPS

§ Due to Tier classifications requirements, a rotaryUPS may be mounted in a separate building.Power distribution equipment design is such that itoffers an economical variant in terms of gettingpower to the IT loads

§ DRUPS are normally cooled with outside air. Thisensures that cooling plant becomes smaller.Power distribution equipment design ensures thatan effective coordination is also achieved alongwith the cooling equipment

§ Rotary UPS comes with a motor generator inaddition to the rectifier

§ Rotary UPS has moving parts which essentiallyare the motor / generator

§ The rotary UPS in the power path all the time.Whenever, the grid voltage and frequency fallbelow the preset limits, the rotary UPS comesinto the main power path and supply at thedesired voltage / frequency

§ A rotary UPS produces a pure sine wave

§ Pay as you grow option also available with rotaryUPS option, only that incremental steps arelarger. Rotary UPS are normally seen in largerdata centers

4

TIP solution for integrationCharacteristics

§ Typically for power output > 1 MVA§ Lower operating costs (life cycle costs)§ Lower space requirements (no batteries)§ Mechanical parts

(maintenance, stock-keeping, …)§ High short-circuit currents (blessing

for selectivity!)§ Efficiency of 90 – 99 %

Features

Restricted © Siemens nv-saPage 42 Building Technologies

Totally Integrated PowerAn integrated solution approach from infeed into to the rack

1

3

5

6MV infeed

LV main distribution

Busbar trunking systems & tap-off boxes /cabling with PDUs

EPMS /Monitoring device

PDU: Power Distribution Unit

Siemens portfolio

Partner portfolio

4 UPS / Generator

2 Transformers

Restricted © Siemens nv-saPage 43 Building Technologies

Totally Integrated PowerBusbar trunking systems & tap-off units / cabling with PDUs

Busbar solution Conventional solution cabling with PDUs

5

Restricted © Siemens nv-saPage 44 Building Technologies

Totally Integrated PowerBusbar trunking systems & tap-off units / cabling with PDUs

01

03

04

02

05

04

04

06

5

4

4

6

3

41

2

1. Busbar trunking unit

2. Junction unit

3. Feeding unit

4. Tap-off unit

5. Ancillary equipment unit

6. Suspension bracket

§ Optimal and easy planning and mounting

§ Less required space

§ Flexible adaptation to all buildingstructures

§ Simple project planning and handling viaconnection flange unit with integratedexpansion compensation

§ Easy expansion

§ High safety and reliability

§ Power distribution for loads from 160 A to1250 A with flexible tap-off units

§ Design verified assembly in acc. withIEC 61439-1/-6

§ Water protection via high degree ofprotection up to IP55

§ Low fire load

§ Safe mounting (codability)

§ Protection against unauthorized access bysealable tap-off points

§ Fire barrier S90 and S120 available

BenefitsBusbar trunking system BD2

5

Restricted © Siemens nv-saPage 45 Building Technologies

Totally Integrated PowerBusbar trunking systems & tap-off units / cabling with PDUs

§ Busbar have proven to be a reliableand economic option over cables inapplications above 250A

§ Offering busbar for the entiredistribution system can help insignificantly reducing Capex

§ Increased configuration flexibilityis available with busbar

§ Pay as you grow option

§ Low on maintenance as compared to cables

§ Usage of busbar as compared to cablesfrees Data Center space, reduces investment in the structuralas the weight is considerably lower

5

Benefits

Restricted © Siemens nv-saPage 46 Building Technologies

Totally Integrated PowerBusbar trunking systems & tap-off units / cabling with PDUs

5

Tap-off units for power supply

Restricted © Siemens nv-saPage 47 Building Technologies

Totally Integrated PowerBusbar trunking systems & tap-off units / cabling with PDUs

§ Certified accordingIEC 60364-4-42

§ Enhanced protection from electrical fires

§ Reliably covering of the previousprotection gap

§ Safe disconnection of the electric circuit incase of hazardous arcing faults

AFD 5SM6 011-1for Miniature Circuit Breakers 1 MW:1+N (5SY60) – (max. 16 A)

5SM6 021-1for circuit breakers 2 MW:§ RCBO 1+N (5SU1)§ MCB 1+N (5SY)each max. 16 A

§ Regular functional self-test§ Overvoltage protection: disconnection at

voltages above 275 V between phase andneutral conductor§ Identical accessories as 5SY MCB

(AS, FC, UR, ST)

BenefitsAFD units 5SM6Arc fault detection units

5

AFD 5SM6 011-1

AFD 5SM6 021-1

Restricted © Siemens nv-saPage 48 Building Technologies

Totally Integrated PowerBusbar trunking systems & tap-off units / cabling with PDUs

5

§ Industrial proven miniature circuit breakersfor highly demanding applications

§ Quick and easy mounting of breakers andaccessories

§ Compliance with many standards allowsglobal standardization of panels

§ For all applications with a rated currentbetween 0.3 A and125 A with A, B, C and Dtripping characteristics

§ Breaking capacity up to 25 kA

§ Compliant with IEC/EN 60898-1, UL1077and CCC

§ Wide range of accessories available

BenefitsSENTRON 5SYMiniature circuit breaker

Restricted © Siemens nv-saPage 49 Building Technologies

Totally Integrated PowerBusbar trunking systems & tap-off units / cabling with PDUs

§ Economic miniature circuit breaker forinfrastructure applications

§ Quick and easy mounting of breakers andaccessories

§ For all applications with a rated current rangebetween 0.3 A and 63 A with B, C and Dtripping characteristics

§ Breaking capacity up to10 kA

§ Compliant with IEC/EN 60898-1

§ Wide range of accessories available

BenefitsSENTRON 5SLMiniature circuit breaker

5

Restricted © Siemens nv-saPage 50 Building Technologies

Totally Integrated PowerBusbar trunking systems & tap-off units / cabling with PDUs

§ Busbar trunking systems have provento be a reliable and economic optionover cables in high current applications

§ Offering busbar trunking systems for the entiredistribution system can help insignificantly reducing Capex

§ Increased configuration flexibilityis available with busbar

§ Pay as you grow option§ Low on maintenance as compared to cables§ Usage of busbar trunking systems as compared to

cables frees Data Center space

5

Tap-off units

PDUs versus tap-off units

§ Power distribution in centralized formfor the racks

§ Wiring will be easier as compared to thetap-off units if power consumption dataneeds to be fed back to a central point

§ Design of racks may have to be fixed basedon the maximum number of outgoings thatare available within the PDU design

PDUs

Restricted © Siemens nv-saPage 51 Building Technologies

Totally Integrated PowerAn integrated solution approach from infeed into to the rack

1

3

5

6MV infeed

LV main distribution

Busbar trunking systems & tap-off boxes /cabling with PDUs

Energy Management

PDU: Power Distribution Unit

Siemens portfolio

Partner portfolio

4 UPS / Generator

2 Transformers

Restricted © Siemens nv-saPage 52 Building Technologies

Totally Integrated PowerEnergy management & control systems

EPMS* / monitoring systemData Center operation managementDC suite landscape / positioning – Focus FIM w/o ITSM

6

• Mainly monitor• Visualization and graphics• Power quality and reliability• Integration capabilities

EPMS

Power distribution

Primary user – our components:

• Monitor only• DC asset management• Visualization• Graphics in 4D• Libraries• Workflow

management• Cable management• CFD• Integration capabilities

into ITSM tools

DCIM

Data centerinfrastructurePrimary user – our components:

• Command and control• Visualization• Graphics and libraries• Automation control• HVAC management• Energy efficiency• Safety and security• Power management• Lighting management• Alarm management• Integration capabilities

BMS

Facilityinfrastructure

Primary user – our components:Facility manager§ Desigo CC§ Apogee Insight§ Desigo Insight§ SIMATIC WinCC

Facility engineer§ SENTRON powermanager§ SICAM PQS§ WinPM.Net

GraphicsMonitor

Integration

* Electrical Power Management System

Data center operator§ Datacenter Clarity LC

Restricted © Siemens nv-saPage 53 Building Technologies

Totally Integrated PowerEnergy management & control systems

6

Monitoring system,e.g. powermanager,

SICAM PQS

MODBUS TCP /Webserver

G

Point of Delivery

GeneratorTransformator

L

Main Distribution

W

G

Recommended measurementsRecommended measurements

UISλ

PQ

Metering from Utility

Wtotal over all phases

U, I, S, cos Phi all 3 Phases

Power Quality in all phases

UIPW

λ

U, I, P, W all 3 Phases

Power Factorall 3 Phases

DistributionDistribution

UPS

Subdistribution

LoadsL

I all 3 Phases

W all 3 Phases

I all 3 Phases

S all 3 Phases

IS

Special Loads

UISλ

PQ

U, I, S, all 3 Phases

Power Factorall 3 Phases

PQ all 3 Phases

I all 3 Phases

S all 3 Phases

IS

I

W

I all 3 Phases

W all 3 Phases

I

ILN

ISummeW

UPS

UPS

U, I, THD, Harmonics, Flicker

all 3 Phases

IU

PQ

Special LoadsIU

PQ

Special Loads

PQ

PQ

SL

I all 3 Phases

W all 3 Phases

I

W, Harmonics

EPMS / monitoring systemMeasuring applications for power quality for industry, building, critical power

§ Energy management (load profile, power monitoring and operational values)§ Billing reporting§ EN50160 power quality reporting and events analyse§ Limit violation§ Alarming and command§ Email notification

Main functionsMain functions

PQ

Restricted © Siemens nv-saPage 54 Building Technologies

Totally Integrated PowerEnergy management & control systems

6

EPMS / monitoring systemA comprehensive portfolio to build power monitoring and power quality solutions

Restricted © Siemens nv-saPage 55 Building Technologies

Totally Integrated PowerEPMS / Monitoring device

6

Performance

Pric

e

Alarming, built-in ethernet, optional Profibus DP& Modbus RTU, expanded 2 dig in and 2 dig outsputs,logging

7KM PAC4200

7KM PAC5200 PQ Class S / EN50160 reporting

waveform capture

7KM PAC5100 U, I, P, Q, S, cos phi , 40. harmonics,

ethernet – MODBUS TCP / IEC 61850

30+ Metering measurements, 2 dig in and 2 dig outputs,1 kWh & kVARh register, built-in Modbus Serial Communications

7KM PAC3100/ 3VA2 with ETU-8

7KM PAC320050+ Metering measurements, 1 dig in & 1 dig outputs,built-in ethernet, Profibus DP, Modbus RTU,one & two piece (Tran) designs

4xU/I and expand. I/O,

class A ed. 2 / EN50160 report

Modbus Master/Gateway

SICAMQ100

7KT PAC1500

SEM3 Branch circuit meter, real-time kWh & current (currently UL only)

Power and energy meter → kWh & kVA Rh register; 2 tarif, S0 interface, MID, one or three-phase networks, 7-digit display LCD, DIN rail mounted

/

SICAMP855

PQ Class S / EN50160 reporting

waveform capture

SICAMP850

U, I, P, Q, S, cos phi , 40. harmonics,

ethernet – MODBUS TCP / IEC 61850

EPMS / monitoring systemMetering devices

Restricted © Siemens nv-saPage 56 Building Technologies

Totally Integrated PowerEnergy management & control systems

6

Powermanager V3.2 SP1

EPMS / monitoring systemPower monitoring software

§ Critical states, e.g. overloads or network quality issues,must be permanently monitored in sensitive areas of datacenters, banks, or hospitals

Require-ment

§ Permanent limit value monitoring in electrical powerdistributions

§ Critical states or values are reported immediately viaSMS/email

§ Network analysis devices allow the detailed monitoring ofthe network in addition to limit value monitoring

Imple-mentation

§ System downtimes and associated damage are avoided§ Protection of sensitive devices – increasing their service

life

Benefit

Restricted © Siemens nv-saPage 57 Building Technologies

Totally Integrated PowerEnergy management & control systems

Power monitoring withpowermanager

High-lights

§ Standalone, PC-based power monitoring software for the powermonitoring system from the SENTRON portfolio

§ Expansion options from the simple standard application up to a fullyflexible customer solution

§ Scalability in terms of device quantities and functions

§ Optimized integration of 7KT/7KM PAC measuring devices,3WL/3VL/3VA circuit breakers and SICAM P85x power quality devices

§ EXCEL-based report incl. cost center report

§ Integrated alerting system

Commu-nication

§ Communication via standard ethernet§ WEB interface available§ Data exchange also via csv-files, SQL-queries or OPC-server§ Distributed client-server structure

EPMS / monitoring systempowermanager

6

More information: Siemens powermanager

Restricted © Siemens nv-saPage 58 Building Technologies

Totally Integrated PowerEnergy management & control systems

6

Flexible control & monitoring system

SICAM power automation systemSICAM PQS – Digital fault recorder withintegrated power quality (PQ) measurement

SICAM AnalyzerPower quality system software

Restricted © Siemens nv-saPage 59 Building Technologies

ContentTotally Integrated Power

1. Overview – focus area

2. Customer challenges and requirements

3. Boundary conditions

4. Planning Support

5. Portfolio

6. Value proposition contribution

7. Data center in a nutshell

8. References, documentations & contacts

Restricted © Siemens nv-saPage 60 Building Technologies

Data Center in a nutshellTotally Integrated Power

Outside-in perspective

§ HV substations§ HV switchgear supply§ System design, installation and

commissioning§ Substation automation§ Power generation

One stop shop – Generation,transmission, storage

Energy Management (EM)

Restricted © Siemens nv-saPage 61 Building Technologies

Data Center in a nutshellTotally Integrated Power

Challenges§ Maximum power supply availability§ Demand-based design, including reserves for the future§ A comprehensive, energy-efficient concept for safe supply of

important system components§ Uninterruptible power supply

Challenges§ Maximum power supply availability§ Demand-based design, including reserves for the future§ A comprehensive, energy-efficient concept for safe supply of

important system components§ Uninterruptible power supply

Solutions§ In-depth consulting on low and medium voltage§ A comprehensive portfolio from a single source –

With no interface problems§ Expert, fast service throughout the entire lifecycle – From planning

and project execution to modernization and maintenance

Solutions§ In-depth consulting on low and medium voltage§ A comprehensive portfolio from a single source –

With no interface problems§ Expert, fast service throughout the entire lifecycle – From planning

and project execution to modernization and maintenance

Benefits§ Reliable, demand-based power distribution§ Sophisticated concepts for uninterruptable power supply§ Customized power distribution with an optimum cost/benefit

ratio, ready for upgrades§ Service-friendly, modularized, and standardized system components§ Compliance with the highest safety standards

Benefits§ Reliable, demand-based power distribution§ Sophisticated concepts for uninterruptable power supply§ Customized power distribution with an optimum cost/benefit

ratio, ready for upgrades§ Service-friendly, modularized, and standardized system components§ Compliance with the highest safety standards

Restricted © Siemens nv-saPage 62 Building Technologies

ContentTotally Integrated Power

1. Overview – focus area

2. Customer challenges and requirements

3. Boundary conditions

4. Planning Support

5. Portfolio

6. Value proposition contribution

7. Data center in a nutshell

8. References, documentations & contacts

Restricted © Siemens nv-saPage 63 Building Technologies

§ Network calculation is performed with SIMARIS design and SINCAL

§ 8 panels of the 30-kV gas-insulated medium-voltage switchgear type NXPLUS including SIPROTECprotection technology

§ 78 panels of the 20/10 kV gas-insulated medium-voltage switchgear type NXPLUS including SIPROTECprotection technology

§ 18 GEAFOL cast-resin transformers, output 2,500 kVA

§ 540 panels of the SIVACON S8 low-voltage switchboard

§ 4,200 m of the SIVACON 8PS busway system, system LXA: using busbars is particularly sited to datacenters, since they are very robust and space-saving, and compared to cables they have a lower fire load.When the data center is extended, the busbars can be extended, too, without any problems and theconnections can be modified in a flexible way that incurs little expense.

Totally Integrated Power – ReferenceT-Systems*, Biere, Germany

§ Integrated planning of electric power distribution using the SIMARIS design and SINCAL software tools

§ This allowed to match the power supply of the individual technical installations – air conditioning andrefrigeration engineering, lighting, fire protection, security, and instrumentation and control – in all details

§ Use of Siemens power distribution systems for integrated and safe power supply → reliability increase

§ Construction of a new high-performance data center for cloud computing, providing 72 MW of power afteroverall completion, IT area 36,000 sqm

§ Two geographically separate buildings

§ Magdeburg data center (preparation and expansion of the existing data center) 30/10/0.4 kV → finalexpansion 50 MVA

§ Biere data center (new building) 110/20/0.4 kV → final expansion 120 MVA

§ Comparison of power demand: City of Erlangen – approx. 107,000 inhabitants – has a power demand ofapprox. 120 MVA

Challenge

Solution

Benefit

Data Center T-Systems*, Biere / GermanyOne of Europe‘s largest data centers

One-stop-shop

§ Everything from a single source withmaximum uptime and safety

* Subsidiary of German Telekom

Why Siemens?

Restricted © Siemens nv-saPage 64 Building Technologies

§ Turnkey solutions using Siemens products (medium voltage / low voltage, building technology)and close collaboration with partner Mega for the air conditioning system

§ Installation of all the electrical, mechanical & special systems.§ Siemens automation & building management systems§ Transformers and MV/LV Electrical Panels§ Uninteruptible power supply§ ca. 80 Desigo PX control systems for air conditioning systems§ Sinteso fire alarms§ Vesda aspirating smoke detection units (ASD)§ Mega air handling units, chillers and cooling towers

Totally Integrated Power – ReferenceEni Green Data Center, Pavia, Italy

§ Comprehensive solutions from a single source with competitive pricing and high quality§ Delivery in time§ Extremely low energy consumption < 1,2 PUE, Energy resources saved for future generations§ CO2 savings equal 1 % of Italy’s planned emissions reduction as laid out in the Kyoto protocol

§ Power supply, building automation and HVAC system for the world‘s most efficient data center§ Power usage effectiveness (PUE) < 1.2§ Tight project schedule

Challenge

Solution

Benefit

Eni Green Data Center, Pavia / Italy

High integration competence

§ Building the world’s most energy efficientdata center by integration of sevenexisting Eni data centers into the newGreen Data Center at Ferrera Erbognone

Why Siemens?

Restricted © Siemens nv-saPage 65 Building Technologies

§ NXPLUS C gas-insulated medium-voltage switchgear (rated current 1,250 A); with the digital,combined protection and control relay SIPROTEC 7SJ63 for integration in the control technology

§ 80 SIVACON 8PV low-voltage switchgear cubicles§ Withdrawable circuit-breakers in the form of 3WL air circuit breakers and 3VL molded case

circuit breakers are installed in these cubicles§ The complete power distribution system is connected to the SICLIMAT X building control

technology system via the 3VL molded circuit breakers§ 110 meter SIVACON 8PS busbar trunking system with rated currents up to 5,000 A for reliable,

short-circuit-proof interconnection of the individual parts of the system; lower fire load of thebusbar trunking systems compared with cables

Totally Integrated Power – ReferenceAirbus Data Center, Hamburg, Germany

§ Power supply solution with communications-capable modules for integrating the power supplyinto the data center’s building control system

§ Use of busbar system instead of cables to reduce the fire load in the building§ Greater operating reliability of the power supply system leading to higher availability of the

connected computers

§ Modernization of a data center power supply

Challenge

Solution

Benefit

Airbus Data Center, Hamburg / Germany

§ Intelligent integration competence

Power supply solution with communication-capable modules forintegrating the power supply into the computer center’s buildingcontrol system

Why Siemens?

Restricted © Siemens nv-saPage 66 Building Technologies

§ Network calculation implemented using SIMARIS design§ 8DH10 gas-insulated medium-voltage switchgear§ 145 SIVACON 8PT low-voltage switchgear cubicles with communications-capable 3WL air

circuit breakers§ 7 GEAFOL transformers each rated at 1600 kVA§ 350 meter SIVACON 8PS busbar trunking system, type LDA (2000-3700 A) and 570 meter type

BDA (315-800 A) for reliable, short-circuit-proof interconnection of the individual parts of thesystem; lower fire load of the busbar systems compared with cables

§ Energy management with WIN CC

Totally Integrated Power – ReferenceLeibniz Data Center, Garching, Germany

§ Reliability thanks to dimensioning of the electrical network with the SIMARIS design software§ Use of busbar systems instead of cables to reduce the fire load in the building§ Greater operating reliability of the power supply system leading to higher availability of the

connected computers

§ Construction of a new data center(consisting of data building, institute building and auditorium building)

Challenge

Solution

Benefit

Leibnitz Data Center, Garching / Gemany

§ Best dimensioning of electrical network

§ Safe and fault-proof power distributor

Higher reliability because of planning competence and minimizationfire risk

Why Siemens?

Restricted © Siemens nv-saPage 67 Building Technologies

§ Geafol transformers§ NXPlus medium-voltage distribution boards§ Sivacon 8PV low-voltage switchgear§ Sivacon 8PS LD + 8PS BD2 + 8PS LRC + 8PS 8BD01 busbar trunking systems§ Desigo building management system§ Siemens power monitoring system§ Overall detailed engineering of complete power distribution system§ Installation and commissioning

Totally Integrated Power – ReferenceKPN Data Center, Oude Meer, Netherlands

§ Reduction of 30% of the overall facilities' power consumption and 70% of cooling power§ Impact on environment significantly reduced§ Gains in efficiency since the size of the data center always represented the actual demand of server space

due to modular design§ Easy building process of data centers that requires minimal planning§ Development of cooling technology, that helps the data centers operate at the most efficient energy level

using the outside air

Challenge

Solution

Benefit

KPN Data Center, Oude Meer / Netherlands

Highly professional and trusted integration partner used as a strong link topower suppliers

§ Supreme knowledge in the field of data centers withgrid expertise to coordinate with power grid operators

Why Siemens?

§ Data center technology is outdated after just a few years, constant improvements need to be done§ Just-in-time investments in additional server-space required to minimize capital lockup§ Energy costs constantly growing and becoming a competitive factor§ Guaranteed availability of data 99.98% of the time - that equals a downtime of less than two hours a year

Restricted © Siemens nv-saPage 68 Building Technologies

Inserting MV/LV power distribution in the existing system

§ 14 pc. Medium voltage switchgear 8DJH 20kV / 16000kW / 630A

§ 10 pc. Transformers 20kV/0,4 kV 2000kVA

§ 5 pc. Transformer 20/10kV

§ 6 Sivacon S8 / 3200A and 5 Sivacon S8 / 2500A

§ 1100 m busbar BD2 250-800A and 900 m Busbar LXA 2500-4000A

§ Metering of racks power consumption with 1500 counters from EM LP

Totally Integrated Power – ReferenceData Center InterXion, Vienna, Austria

Enhanced selectivity and monitoring for more efficient operation

§ With the high quality solution from Siemens the customer can ensure its customers a secure and highlyavailable low voltage energy supply for the sensitive IT-infrastructure

§ Furthermore due to the integrated overall solution the customer benefits from: Lowest possible level ofinterfaces, one contact person on-site and precise differentiation of the liabilities

Solution

Benefit§ Outstanding technical skills and expertise of data center power

distribution (TIP Planning support)

§ Refurbishing new EM equipment into the existing power supply system(interoperability, enhanced features)

Why Siemens?

Up-grading power supply, adding power monitoring§ InterXion searches for outstanding safety and reliable power distribution including power monitoring, control

of non Siemens parts, selectivity, close communication during installation and putting into operation,availability of the supplier 24/7/365

§ The customer runs 36 co-location data centers worldwide (customers like Amazon, mass response,CSC,…), equipped with non-Siemens portfolio.High integration competence with maximum interoperability needed for refurbishment.

InterXion Data Center, Vienna / Austria

Challenge

Restricted © Siemens nv-saPage 69 Building Technologies

DocumentationsTotally Integrated Power

Data center specific technical knowledge – www.siemens.com/tip/datacenter

Technical information

Restricted © Siemens nv-saPage 70 Building Technologies

DocumentationsTotally Integrated Power

Data center specific technical knowledge – www.siemens.com/tip-cs/downloadcenter

Application manuals & technical series for planning support

Restricted © Siemens nv-saPage 71 Building Technologies

Contact pageTotally Integrated Power

Hugo DamoiseauxPhone: +32 475 24 29 79e-mail: [email protected]